From: Patrick Finnegan <pat@computer-refuge.org>
To: sparclinux@vger.kernel.org
Subject: Re: Boot problems on a V880
Date: Sat, 28 Nov 2009 03:07:09 +0000 [thread overview]
Message-ID: <200911272207.09314.pat@computer-refuge.org> (raw)
In-Reply-To: <200911262202.45791.pat@computer-refuge.org>
On Friday 27 November 2009, David Miller wrote:
> From: Patrick Finnegan <pat@computer-refuge.org>
> Date: Fri, 27 Nov 2009 20:52:17 -0500
>
> > On Friday 27 November 2009, David Miller wrote:
> >> From: Patrick Finnegan <pat@computer-refuge.org>
> >> Date: Thu, 26 Nov 2009 22:02:45 -0500
> >>
> >> > I seem to have a new/different problem with booting on a Sun
> >> > V880. I have tried Debian/sarge, etch, and lenny installers,
> >> > each fails. After reading through a bit of this list, I
> >> > downloaded
> >> > sparc-next-2.6 via git, and compiled a kernel (based on
> >> > Debian/lenny's 2.6.26-2-sparc64 kernel config), and it still
> >> > won't boot. I also updated to the latest OpenBoot image, hoping
> >> > that would help, but I didn't see any difference.
> >>
> >> sparc-next-2.6 doesn't have the bug fix, sparc-2.6 does
> >
> > Ok, with sparc-2.6, I get farther. If I pull the RSC card, it
> > actually gets to a point where it tries to mount the root
> > filesystem (and fails, because I don't have one for it yet). With
> > the RSC in, it hangs after the following output. I have tried this
> > with the OpenBoot console set to both ttya and rsc-console, and
> > passed a "console=ttyS0" each time. At the point that the machine
> > hangs, it locks up hard enough that sending a break doesn't send me
> > to an "ok" prompt.
>
> try booting with "initcall_debug=1 ignore_level" on the kernel
> command line
>
> And in the mean time you can install and test with the RSC card
> removed
I'll try pulling the RSC later tonight or tomorrow. Booting with the
args you specified provide this (and it hangs after the
init_per_zone_wmark_min call):
{7} ok boot gem console=ttyS0 initcall_debug=1 ignore_level
Boot device: /pci@8,600000/network@1 File and args: console=ttyS0
initcall_debug=1 ignore_level
Requesting Internet Address for 0:3:ba:2f:1f:16
Requesting Internet Address for 0:3:ba:2f:1f:16
Requesting Internet Address for 0:3:ba:2f:1f:16
Requesting Internet Address for 0:3:ba:2f:1f:16
WARNING: /packages/obp-tftp: Power Supply 2 not receiving AC power
Requesting Internet Address for 0:3:ba:2f:1f:16
Requesting Internet Address for 0:3:ba:2f:1f:16
\
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.30.4 2009/08/19 07:21'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc3 (root@v210) (gcc version 4.3.4
(Debian 4.3.4-6) ) #1 SMP Fri Nov 27 20:17:53 EST 2009
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:2f:1f:16
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@9,700000/ebus@1/serial@1,400000:a
[ 0.000000] PROM: Built device tree with 160133 bytes of memory.
[ 0.000000] Top of RAM: 0xd0ffb18000, Total RAM: 0x3ff932000
[ 0.000000] Memory hole size: 839681MB
[ 0.000000] [0000010140000000-fffff8a000c00000] page_structs\x131072
node=0 entry\x1280/0
[ 0.000000] [0000010140000000-fffff8a001000000] page_structs\x131072
node=0 entry\x1281/0
[ 0.000000] [0000010140800000-fffff8a001400000] page_structs\x131072
node=0 entry\x1282/0
[ 0.000000] [0000010140800000-fffff8a001800000] page_structs\x131072
node=0 entry\x1283/0
[ 0.000000] [0000010141000000-fffff8a001c00000] page_structs\x131072
node=0 entry\x1284/0
[ 0.000000] [0000010141000000-fffff8a002000000] page_structs\x131072
node=0 entry\x1285/0
[ 0.000000] [0000010141800000-fffff8a002400000] page_structs\x131072
node=0 entry\x1286/0
[ 0.000000] [0000010141800000-fffff8a002800000] page_structs\x131072
node=0 entry\x1287/0
[ 0.000000] [0000010160000000-fffff8a002c00000] page_structs\x131072
node=0 entry\x1408/0
[ 0.000000] [0000010160000000-fffff8a003000000] page_structs\x131072
node=0 entry\x1409/0
[ 0.000000] [0000010160800000-fffff8a003400000] page_structs\x131072
node=0 entry\x1410/0
[ 0.000000] [0000010160800000-fffff8a003800000] page_structs\x131072
node=0 entry\x1411/0
[ 0.000000] [0000010161000000-fffff8a003c00000] page_structs\x131072
node=0 entry\x1412/0
[ 0.000000] [0000010161000000-fffff8a004000000] page_structs\x131072
node=0 entry\x1413/0
[ 0.000000] [0000010161800000-fffff8a004400000] page_structs\x131072
node=0 entry\x1414/0
[ 0.000000] [0000010161800000-fffff8a004800000] page_structs\x131072
node=0 entry\x1415/0
[ 0.000000] [0000010180000000-fffff8a004c00000] page_structs\x131072
node=0 entry\x1536/0
[ 0.000000] [0000010180000000-fffff8a005000000] page_structs\x131072
node=0 entry\x1537/0
[ 0.000000] [0000010180800000-fffff8a005400000] page_structs\x131072
node=0 entry\x1538/0
[ 0.000000] [0000010180800000-fffff8a005800000] page_structs\x131072
node=0 entry\x1539/0
[ 0.000000] [0000010181000000-fffff8a005c00000] page_structs\x131072
node=0 entry\x1540/0
[ 0.000000] [0000010181000000-fffff8a006000000] page_structs\x131072
node=0 entry\x1541/0
[ 0.000000] [0000010181800000-fffff8a006400000] page_structs\x131072
node=0 entry\x1542/0
[ 0.000000] [0000010181800000-fffff8a006800000] page_structs\x131072
node=0 entry\x1543/0
[ 0.000000] [00000101a0000000-fffff8a006c00000] page_structs\x131072
node=0 entry\x1664/0
[ 0.000000] [00000101a0000000-fffff8a007000000] page_structs\x131072
node=0 entry\x1665/0
[ 0.000000] [00000101a0800000-fffff8a007400000] page_structs\x131072
node=0 entry\x1666/0
[ 0.000000] [00000101a0800000-fffff8a007800000] page_structs\x131072
node=0 entry\x1667/0
[ 0.000000] [00000101a1000000-fffff8a007c00000] page_structs\x131072
node=0 entry\x1668/0
[ 0.000000] [00000101a1000000-fffff8a008000000] page_structs\x131072
node=0 entry\x1669/0
[ 0.000000] [00000101a1800000-fffff8a008400000] page_structs\x131072
node=0 entry\x1670/0
[ 0.000000] [00000101a1800000-fffff8a008800000] page_structs\x131072
node=0 entry\x1671/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x05000000 -> 0x0687fd8c
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x05000000 -> 0x05080000
[ 0.000000] 0: 0x05800000 -> 0x05880000
[ 0.000000] 0: 0x06000000 -> 0x06080000
[ 0.000000] 0: 0x06800000 -> 0x0687f7ff
[ 0.000000] 0: 0x0687f800 -> 0x0687fc3d
[ 0.000000] 0: 0x0687fd0a -> 0x0687fd58
[ 0.000000] 0: 0x0687fd7d -> 0x0687fd8c
[ 0.000000] Booting Linux...
[ 0.000000] PERCPU: Embedded 7 pages/cpu @fffff8a008c00000 s22336 r8192
d26816 u524288
[ 0.000000] pcpu-alloc: s22336 r8192 d26816 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1895581
[ 0.000000] Kernel command line: console=ttyS0 initcall_debug=1
ignore_level
[ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 11,
16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 10, 8388608
bytes)
[ 0.000000] Memory: 16607592k available (2968k kernel code, 1176k data,
208k init) [fffff80000000000,000000d0ffb18000]
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:255
[ 0.000000] clocksource: mult[640000] shift[16]
[ 0.000000] clockevent: mult[28f5c28] shift[32]
[ 0.000000] Console: colour dummy device 80x25
[ 122.922602] Calibrating delay using timer specific routine.. 20.01
BogoMIPS (lpj@029)
[ 123.016764] Security Framework initialized
[ 123.065666] Mount-cache hash table entries: 512
[ 123.120213] Initializing cgroup subsys ns
[ 123.167677] Initializing cgroup subsys cpuacct
[ 123.220801] Initializing cgroup subsys devices
[ 123.273918] Initializing cgroup subsys freezer
[ 123.327292] calling migration_init+0x0/0x68 @ 1
[ 123.382379] initcall migration_init+0x0/0x68 returned 0 after 0 usecs
[ 123.459346] calling spawn_ksoftirqd+0x0/0x64 @ 1
[ 123.515673] initcall spawn_ksoftirqd+0x0/0x64 returned 0 after 0 usecs
[ 123.593729] calling init_call_single_data+0x0/0xac @ 1
[ 123.656225] initcall init_call_single_data+0x0/0xac returned 0 after 0
usecs
[ 123.740601] calling spawn_softlockup_task+0x0/0x8c @ 1
[ 123.803167] initcall spawn_softlockup_task+0x0/0x8c returned 0 after 0
usecs
[ 123.887479] calling relay_init+0x0/0x8 @ 1
[ 123.937476] initcall relay_init+0x0/0x8 returned 0 after 0 usecs
[ 124.009353] calling tracer_alloc_buffers+0x0/0x1c0 @ 1
[ 124.072051] initcall tracer_alloc_buffers+0x0/0x1c0 returned 0 after 0
usecs
[ 124.156234] calling init_trace_printk+0x0/0x18 @ 1
[ 124.214567] initcall init_trace_printk+0x0/0x18 returned 0 after 0
usecs
[ 124.296266] CPU 0: synchronized TICK with master CPU (last diff 0
cycles, maxerr 11 cycles)
[ 124.298589] CPU 1: synchronized TICK with master CPU (last diff 0
cycles, maxerr 11 cycles)
[ 124.301692] CPU 2: synchronized TICK with master CPU (last diff 0
cycles, maxerr 11 cycles)
[ 124.304910] CPU 3: synchronized TICK with master CPU (last diff 0
cycles, maxerr 11 cycles)
[ 124.308035] CPU 4: synchronized TICK with master CPU (last diff 0
cycles, maxerr 11 cycles)
[ 124.311052] CPU 5: synchronized TICK with master CPU (last diff -1
cycles, maxerr 11 cycles)
[ 124.314285] CPU 6: synchronized TICK with master CPU (last diff 0
cycles, maxerr 11 cycles)
[ 124.314301] Brought up 8 CPUs
[ 125.032092] calling init_mmap_min_addr+0x0/0x18 @ 1
[ 125.090847] initcall init_mmap_min_addr+0x0/0x18 returned 0 after 0
usecs
[ 125.172087] calling init_cpufreq_transition_notifier_list+0x0/0x28 @ 1
[ 125.251261] initcall init_cpufreq_transition_notifier_list+0x0/0x28
returned 0 after 0 usecs
[ 125.352295] calling net_ns_init+0x0/0xf4 @ 1
[ 125.404502] initcall net_ns_init+0x0/0xf4 returned 0 after 0 usecs
[ 125.478367] calling sparc_globreg_init+0x0/0x1c @ 1
[ 125.537720] initcall sparc_globreg_init+0x0/0x1c returned 0 after 0
usecs
[ 125.618968] calling register_sparc64_cpufreq_notifier+0x0/0x20 @ 1
[ 125.693971] initcall register_sparc64_cpufreq_notifier+0x0/0x20
returned 0 after 0 usecs
[ 125.790848] calling sstate_init+0x0/0x78 @ 1
[ 125.842931] initcall sstate_init+0x0/0x78 returned 0 after 0 usecs
[ 125.916890] calling ldc_init+0x0/0xdc @ 1
[ 125.965850] initcall ldc_init+0x0/0xdc returned -19 after 0 usecs
[ 126.038769] calling sysctl_init+0x0/0x2c @ 1
[ 126.091299] initcall sysctl_init+0x0/0x2c returned 0 after 0 usecs
[ 126.164813] calling ksysfs_init+0x0/0xc4 @ 1
[ 126.216918] initcall ksysfs_init+0x0/0xc4 returned 0 after 0 usecs
[ 126.290859] calling async_init+0x0/0x64 @ 1
[ 126.341961] initcall async_init+0x0/0x64 returned 0 after 0 usecs
[ 126.414823] calling init_jiffies_clocksource+0x0/0x18 @ 1
[ 126.480449] initcall init_jiffies_clocksource+0x0/0x18 returned 0 after
0 usecs
[ 126.567947] calling init_zero_pfn+0x0/0x28 @ 1
[ 126.622125] initcall init_zero_pfn+0x0/0x28 returned 0 after 0 usecs
[ 126.698158] calling filelock_init+0x0/0x38 @ 1
[ 126.752358] initcall filelock_init+0x0/0x38 returned 0 after 0 usecs
[ 126.828368] calling init_script_binfmt+0x0/0x1c @ 1
[ 126.887744] initcall init_script_binfmt+0x0/0x1c returned 0 after 0
usecs
[ 126.968996] calling init_elf_binfmt+0x0/0x1c @ 1
[ 127.025246] initcall init_elf_binfmt+0x0/0x1c returned 0 after 0 usecs
[ 127.103373] calling init_compat_elf_binfmt+0x0/0x1c @ 1
[ 127.166917] initcall init_compat_elf_binfmt+0x0/0x1c returned 0 after 0
usecs
[ 127.252334] calling debugfs_init+0x0/0x64 @ 1
[ 127.305471] initcall debugfs_init+0x0/0x64 returned 0 after 0 usecs
[ 127.380461] calling securityfs_init+0x0/0x50 @ 1
[ 127.436722] initcall securityfs_init+0x0/0x50 returned 0 after 0 usecs
[ 127.514843] calling random32_init+0x0/0xec @ 1
[ 127.569014] initcall random32_init+0x0/0xec returned 0 after 0 usecs
[ 127.645052] calling regulator_init+0x0/0x30 @ 1
[ 127.700256] regulator: core version 0.5
[ 127.746245] initcall regulator_init+0x0/0x30 returned 0 after 3906
usecs
[ 127.826312] calling cpufreq_core_init+0x0/0xd0 @ 1
[ 127.884653] initcall cpufreq_core_init+0x0/0xd0 returned 0 after 0
usecs
[ 127.964848] calling sock_init+0x0/0x60 @ 1
[ 128.014973] initcall sock_init+0x0/0x60 returned 0 after 0 usecs
[ 128.086728] calling net_inuse_init+0x0/0x2c @ 1
[ 128.141943] initcall net_inuse_init+0x0/0x2c returned 0 after 0 usecs
[ 128.219021] calling netlink_proto_init+0x0/0x2a8 @ 1
[ 128.279456] NET: Registered protocol family 16
[ 128.332607] initcall netlink_proto_init+0x0/0x2a8 returned 0 after 3906
usecs
[ 128.417983] calling of_bus_driver_init+0x0/0x54 @ 1
[ 128.505618] initcall of_bus_driver_init+0x0/0x54 returned 0 after 27343
usecs
[ 128.589389] calling vio_init+0x0/0x1a4 @ 1
[ 128.639396] initcall vio_init+0x0/0x1a4 returned 0 after 0 usecs
[ 128.711279] calling bdi_class_init+0x0/0x54 @ 1
[ 128.767139] initcall bdi_class_init+0x0/0x54 returned 0 after 0 usecs
[ 128.843417] calling kobject_uevent_init+0x0/0x64 @ 1
[ 128.903934] initcall kobject_uevent_init+0x0/0x64 returned 0 after 0
usecs
[ 128.986122] calling pcibus_class_init+0x0/0x20 @ 1
[ 129.044591] initcall pcibus_class_init+0x0/0x20 returned 0 after 0
usecs
[ 129.124777] calling pci_driver_init+0x0/0x18 @ 1
[ 129.181109] initcall pci_driver_init+0x0/0x18 returned 0 after 0 usecs
[ 129.259070] calling backlight_class_init+0x0/0x74 @ 1
[ 129.320622] initcall backlight_class_init+0x0/0x74 returned 0 after 0
usecs
[ 129.403883] calling tty_class_init+0x0/0x48 @ 1
[ 129.459167] initcall tty_class_init+0x0/0x48 returned 0 after 0 usecs
[ 129.536143] calling vtconsole_class_init+0x0/0xe4 @ 1
[ 129.597856] initcall vtconsole_class_init+0x0/0xe4 returned 0 after 0
usecs
[ 129.680938] calling i2c_init+0x0/0x6c @ 1
[ 129.730148] initcall i2c_init+0x0/0x6c returned 0 after 0 usecs
[ 129.800736] calling cpu_type_probe+0x0/0x234 @ 1
[ 129.856977] initcall cpu_type_probe+0x0/0x234 returned 0 after 0 usecs
[ 129.935097] calling pcr_arch_init+0x0/0x130 @ 1
[ 129.990316] Testing NMI watchdog ... OK.
[ 130.115402] Performance events: Supported PMU type is 'ultra3+'
[ 130.186248] initcall pcr_arch_init+0x0/0x130 returned 0 after 89843
usecs
[ 130.267497] calling topology_init+0x0/0xe8 @ 1
[ 130.322659] initcall topology_init+0x0/0xe8 returned 0 after 0 usecs
[ 130.397728] calling sunfire_init+0x0/0x34 @ 1
[ 130.451269] initcall sunfire_init+0x0/0x34 returned 0 after 0 usecs
[ 130.525883] calling sbus_init+0x0/0x45c @ 1
[ 130.576896] initcall sbus_init+0x0/0x45c returned 0 after 0 usecs
[ 130.649799] calling psycho_init+0x0/0x20 @ 1
[ 130.702309] initcall psycho_init+0x0/0x20 returned 0 after 0 usecs
[ 130.775864] calling sabre_init+0x0/0x20 @ 1
[ 130.827409] initcall sabre_init+0x0/0x20 returned 0 after 0 usecs
[ 130.899826] calling schizo_init+0x0/0x20 @ 1
[ 130.952035] /pci@8,700000: SCHIZO PCI Bus Module ver[4:0]
[ 131.016477] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000]
[ 131.091905] PCI: Scanning PBM /pci@8,700000
[ 131.140676] /pci@8,600000: SCHIZO PCI Bus Module ver[4:0]
[ 131.204725] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000]
[ 131.280134] PCI: Scanning PBM /pci@8,600000
[ 131.329132] /pci@9,700000: SCHIZO PCI Bus Module ver[4:0]
[ 131.392978] /pci@9,700000: PCI IO[7ffeb000000] MEM[7fc00000000]
[ 131.468401] PCI: Scanning PBM /pci@9,700000
[ 131.521913] /pci@9,600000: SCHIZO PCI Bus Module ver[4:0]
[ 131.584722] /pci@9,600000: PCI IO[7ffe9000000] MEM[7fb00000000]
[ 131.660168] PCI: Scanning PBM /pci@9,600000
[ 131.710997] initcall schizo_init+0x0/0x20 returned 0 after 66406 usecs
[ 131.787354] calling pci_sun4v_init+0x0/0x20 @ 1
[ 131.842973] initcall pci_sun4v_init+0x0/0x20 returned 0 after 0 usecs
[ 131.919647] calling fire_init+0x0/0x20 @ 1
[ 131.969996] initcall fire_init+0x0/0x20 returned 0 after 0 usecs
[ 132.041510] calling ds_init+0x0/0x3c @ 1
[ 132.089617] initcall ds_init+0x0/0x3c returned 0 after 0 usecs
[ 132.159224] calling param_sysfs_init+0x0/0x280 @ 1
[ 132.221063] initcall param_sysfs_init+0x0/0x280 returned 0 after 0
usecs
[ 132.299553] calling pm_sysrq_init+0x0/0x20 @ 1
[ 132.353688] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[ 132.429731] calling audit_watch_init+0x0/0x34 @ 1
[ 132.487024] initcall audit_watch_init+0x0/0x34 returned 0 after 0 usecs
[ 132.566194] calling init_slow_work+0x0/0x4c @ 1
[ 132.621401] initcall init_slow_work+0x0/0x4c returned 0 after 0 usecs
[ 132.698484] calling default_bdi_init+0x0/0xc0 @ 1
[ 132.756100] initcall default_bdi_init+0x0/0xc0 returned 0 after 0 usecs
[ 132.835098] calling init_bio+0x0/0x13c @ 1
[ 132.885800] bio: create slab <bio-0> at 0
[ 132.932906] initcall init_bio+0x0/0x13c returned 0 after 3906 usecs
[ 133.007870] calling cryptomgr_init+0x0/0x18 @ 1
[ 133.063079] initcall cryptomgr_init+0x0/0x18 returned 0 after 0 usecs
[ 133.140163] calling blk_settings_init+0x0/0x30 @ 1
[ 133.198499] initcall blk_settings_init+0x0/0x30 returned 0 after 0
usecs
[ 133.278704] calling blk_ioc_init+0x0/0x30 @ 1
[ 133.331865] initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs
[ 133.406833] calling blk_softirq_init+0x0/0x84 @ 1
[ 133.464130] initcall blk_softirq_init+0x0/0x84 returned 0 after 0 usecs
[ 133.543292] calling blk_iopoll_setup+0x0/0x84 @ 1
[ 133.600590] initcall blk_iopoll_setup+0x0/0x84 returned 0 after 0 usecs
[ 133.679754] calling genhd_device_init+0x0/0x7c @ 1
[ 133.739047] initcall genhd_device_init+0x0/0x7c returned 0 after 0
usecs
[ 133.818347] calling blk_dev_integrity_init+0x0/0x30 @ 1
[ 133.881880] initcall blk_dev_integrity_init+0x0/0x30 returned 0 after 0
usecs
[ 133.967276] calling pci_slot_init+0x0/0x4c @ 1
[ 134.021441] initcall pci_slot_init+0x0/0x4c returned 0 after 0 usecs
[ 134.097476] calling misc_init+0x0/0xbc @ 1
[ 134.147672] initcall misc_init+0x0/0xbc returned 0 after 0 usecs
[ 134.219357] calling vga_arb_device_init+0x0/0x90 @ 1
[ 134.279974] vgaarb: loaded
[ 134.312073] initcall vga_arb_device_init+0x0/0x90 returned 0 after 3906
usecs
[ 134.397480] calling serio_init+0x0/0x90 @ 1
[ 134.448762] initcall serio_init+0x0/0x90 returned 0 after 0 usecs
[ 134.521445] calling input_init+0x0/0x15c @ 1
[ 134.573700] initcall input_init+0x0/0x15c returned 0 after 0 usecs
[ 134.647487] calling rtc_init+0x0/0x6c @ 1
[ 134.696587] initcall rtc_init+0x0/0x6c returned 0 after 0 usecs
[ 134.767278] calling proto_init+0x0/0x18 @ 1
[ 134.818326] initcall proto_init+0x0/0x18 returned 0 after 0 usecs
[ 134.891236] calling net_dev_init+0x0/0x1c8 @ 1
[ 134.945871] initcall net_dev_init+0x0/0x1c8 returned 0 after 0 usecs
[ 135.021453] calling neigh_init+0x0/0x88 @ 1
[ 135.072493] initcall neigh_init+0x0/0x88 returned 0 after 0 usecs
[ 135.145407] calling fib_rules_init+0x0/0xb4 @ 1
[ 135.200622] initcall fib_rules_init+0x0/0xb4 returned 0 after 0 usecs
[ 135.277704] calling genl_init+0x0/0xb4 @ 1
[ 135.327765] initcall genl_init+0x0/0xb4 returned 0 after 0 usecs
[ 135.399584] calling sysctl_init+0x0/0x4c @ 1
[ 135.451668] initcall sysctl_init+0x0/0x4c returned 0 after 0 usecs
[ 135.525626] calling clock_init+0x0/0x7c @ 1
[ 135.577332] /pci@9,700000/ebus@1/rtc@1,300070: RTC regs at
0x7fc7e300070
[ 135.657859] initcall clock_init+0x0/0x7c returned 0 after 3906 usecs
[ 135.732925] calling dma_init+0x0/0x8 @ 1
[ 135.780840] initcall dma_init+0x0/0x8 returned 0 after 0 usecs
[ 135.850631] calling auxio_init+0x0/0x20 @ 1
[ 135.901896] initcall auxio_init+0x0/0x20 returned 0 after 0 usecs
[ 135.974598] calling clocksource_done_booting+0x0/0x38 @ 1
[ 136.040217] Switching to clocksource stick
[ 136.090600] initcall clocksource_done_booting+0x0/0x38 returned 0 after
4702 usecs
[ 136.180056] calling rb_init_debugfs+0x0/0x38 @ 1
[ 136.236355] initcall rb_init_debugfs+0x0/0x38 returned 0 after 79 usecs
[ 136.315440] calling tracer_init_debugfs+0x0/0x334 @ 1
[ 136.377261] initcall tracer_init_debugfs+0x0/0x334 returned 0 after 344
usecs
[ 136.462318] calling init_trace_printk_function_export+0x0/0x38 @ 1
[ 136.537324] initcall init_trace_printk_function_export+0x0/0x38
returned 0 after 6 usecs
[ 136.634206] calling event_trace_init+0x0/0x24c @ 1
[ 136.697662] initcall event_trace_init+0x0/0x24c returned 0 after 5008
usecs
[ 136.779206] calling init_pipe_fs+0x0/0x4c @ 1
[ 136.832402] initcall init_pipe_fs+0x0/0x4c returned 0 after 76 usecs
[ 136.908382] calling eventpoll_init+0x0/0xa8 @ 1
[ 136.963696] initcall eventpoll_init+0x0/0xa8 returned 0 after 117 usecs
[ 137.042745] calling anon_inode_init+0x0/0x10c @ 1
[ 137.100057] initcall anon_inode_init+0x0/0x10c returned 0 after 21
usecs
[ 137.180263] calling blk_scsi_ioctl_init+0x0/0x238 @ 1
[ 137.241709] initcall blk_scsi_ioctl_init+0x0/0x238 returned 0 after 3
usecs
[ 137.325042] calling chr_dev_init+0x0/0xd4 @ 1
[ 137.379931] initcall chr_dev_init+0x0/0xd4 returned 0 after 1720 usecs
[ 137.456539] calling firmware_class_init+0x0/0x80 @ 1
[ 137.517082] initcall firmware_class_init+0x0/0x80 returned 0 after 155
usecs
[ 137.601306] calling cpufreq_gov_performance_init+0x0/0x1c @ 1
[ 137.671091] initcall cpufreq_gov_performance_init+0x0/0x1c returned 0
after 2 usecs
[ 137.762769] calling sysctl_core_init+0x0/0x3c @ 1
[ 137.820125] initcall sysctl_core_init+0x0/0x3c returned 0 after 73
usecs
[ 137.900261] calling inet_init+0x0/0x28c @ 1
[ 137.951478] NET: Registered protocol family 2
[ 138.003870] IP route cache hash table entries: 524288 (order: 9,
4194304 bytes)
[ 138.094977] TCP established hash table entries: 524288 (order: 10,
8388608 bytes)
[ 138.216408] TCP bind hash table entries: 65536 (order: 7, 1048576
bytes)
[ 138.299063] TCP: Hash tables configured (established 524288 bind 65536)
[ 138.376441] TCP reno registered
[ 138.414462] initcall inet_init+0x0/0x28c returned 0 after 452290 usecs
[ 138.492059] calling af_unix_init+0x0/0x5c @ 1
[ 138.545204] NET: Registered protocol family 1
[ 138.597288] initcall af_unix_init+0x0/0x5c returned 0 after 50896 usecs
[ 138.676439] calling populate_rootfs+0x0/0x2f0 @ 1
[ 138.733919] initcall populate_rootfs+0x0/0x2f0 returned 0 after 197
usecs
[ 138.814973] calling power_init+0x0/0x20 @ 1
[ 138.866161] power: Control reg at 7fc7e30002e
[ 138.918526] initcall power_init+0x0/0x20 returned 0 after 51283 usecs
[ 138.995197] calling mdesc_misc_init+0x0/0x18 @ 1
[ 139.051621] initcall mdesc_misc_init+0x0/0x18 returned 0 after 186
usecs
[ 139.131645] calling us3mc_init+0x0/0xc8 @ 1
[ 139.182737] chmc: UltraSPARC-III memory controller at /memory-
controller@0,400000 [ACTIVE]
[ 139.281678] chmc: UltraSPARC-III memory controller at /memory-
controller@1,400000 [ACTIVE]
[ 139.380625] chmc: UltraSPARC-III memory controller at /memory-
controller@2,400000 [ACTIVE]
[ 139.479584] chmc: UltraSPARC-III memory controller at /memory-
controller@3,400000 [ACTIVE]
[ 139.578560] chmc: UltraSPARC-III memory controller at /memory-
controller@4,400000 [ACTIVE]
[ 139.677507] chmc: UltraSPARC-III memory controller at /memory-
controller@5,400000 [ACTIVE]
[ 139.776465] chmc: UltraSPARC-III memory controller at /memory-
controller@6,400000 [ACTIVE]
[ 139.875436] chmc: UltraSPARC-III memory controller at /memory-
controller@7,400000 [ACTIVE]
[ 139.974589] initcall us3mc_init+0x0/0xc8 returned 0 after 773345 usecs
[ 140.052493] calling audit_classes_init+0x0/0xb0 @ 1
[ 140.111886] initcall audit_classes_init+0x0/0xb0 returned 0 after 19
usecs
[ 140.194173] calling init_sched_debug_procfs+0x0/0x34 @ 1
[ 140.258761] initcall init_sched_debug_procfs+0x0/0x34 returned 0 after
15 usecs
[ 140.346247] calling proc_execdomains_init+0x0/0x30 @ 1
[ 140.408753] initcall proc_execdomains_init+0x0/0x30 returned 0 after 4
usecs
[ 140.493133] calling ioresources_init+0x0/0x50 @ 1
[ 140.550426] initcall ioresources_init+0x0/0x50 returned 0 after 7 usecs
[ 140.629587] calling uid_cache_init+0x0/0xa4 @ 1
[ 140.684848] initcall uid_cache_init+0x0/0xa4 returned 0 after 51 usecs
[ 140.762933] calling init_posix_timers+0x0/0x174 @ 1
[ 140.822338] initcall init_posix_timers+0x0/0x174 returned 0 after 38
usecs
[ 140.904593] calling init_posix_cpu_timers+0x0/0x104 @ 1
[ 140.968136] initcall init_posix_cpu_timers+0x0/0x104 returned 0 after 2
usecs
[ 141.053561] calling nsproxy_cache_init+0x0/0x30 @ 1
[ 141.112986] initcall nsproxy_cache_init+0x0/0x30 returned 0 after 54
usecs
[ 141.195223] calling create_proc_profile+0x0/0x21c @ 1
[ 141.256681] initcall create_proc_profile+0x0/0x21c returned 0 after 0
usecs
[ 141.340024] calling timekeeping_init_device+0x0/0x30 @ 1
[ 141.404905] initcall timekeeping_init_device+0x0/0x30 returned 0 after
296 usecs
[ 141.493147] calling init_clocksource_sysfs+0x0/0x64 @ 1
[ 141.556970] initcall init_clocksource_sysfs+0x0/0x64 returned 0 after
274 usecs
[ 141.644203] calling init_timer_list_procfs+0x0/0x34 @ 1
[ 141.707739] initcall init_timer_list_procfs+0x0/0x34 returned 0 after 5
usecs
[ 141.793151] calling init_tstats_procfs+0x0/0x34 @ 1
[ 141.852531] initcall init_tstats_procfs+0x0/0x34 returned 0 after 4
usecs
[ 141.933786] calling futex_init+0x0/0xa0 @ 1
[ 141.984871] initcall futex_init+0x0/0xa0 returned 0 after 49 usecs
[ 142.058780] calling proc_modules_init+0x0/0x30 @ 1
[ 142.117118] initcall proc_modules_init+0x0/0x30 returned 0 after 4
usecs
[ 142.197333] calling kallsyms_init+0x0/0x30 @ 1
[ 142.251497] initcall kallsyms_init+0x0/0x30 returned 0 after 4 usecs
[ 142.327536] calling pid_namespaces_init+0x0/0x30 @ 1
[ 142.387986] initcall pid_namespaces_init+0x0/0x30 returned 0 after 32
usecs
[ 142.471299] calling audit_init+0x0/0x138 @ 1
[ 142.523370] audit: initializing netlink socket (disabled)
[ 142.587988] type 00 audit(8.204:1): initialized
[ 142.644215] initcall audit_init+0x0/0x138 returned 0 after 118007 usecs
[ 142.723377] calling audit_tree_init+0x0/0x58 @ 1
[ 142.779647] initcall audit_tree_init+0x0/0x58 returned 0 after 10 usecs
[ 142.858796] calling hung_task_init+0x0/0x54 @ 1
[ 142.914112] initcall hung_task_init+0x0/0x54 returned 0 after 103 usecs
[ 142.993178] calling utsname_sysctl_init+0x0/0x1c @ 1
[ 143.053674] initcall utsname_sysctl_init+0x0/0x1c returned 0 after 70
usecs
[ 143.136938] calling init_tracepoints+0x0/0x18 @ 1
[ 143.194221] initcall init_tracepoints+0x0/0x18 returned 0 after 2 usecs
[ 143.273388] calling init_events+0x0/0x84 @ 1
[ 143.325491] initcall init_events+0x0/0x84 returned 0 after 10 usecs
[ 143.400475] calling init_sched_switch_trace+0x0/0x18 @ 1
[ 143.465064] initcall init_sched_switch_trace+0x0/0x18 returned 0 after
4 usecs
[ 143.551519] calling init_blk_tracer+0x0/0x64 @ 1
[ 143.607781] initcall init_blk_tracer+0x0/0x64 returned 0 after 2 usecs
[ 143.685897] calling perf_event_sysfs_init+0x0/0x20 @ 1
[ 143.748421] initcall perf_event_sysfs_init+0x0/0x20 returned 0 after 22
usecs
[ 143.833815] calling init_per_zone_wmark_min+0x0/0x8c @ 1
Pat
--
Purdue University Research Computing --- http://www.rcac.purdue.edu/
The Computer Refuge --- http://computer-refuge.org
next prev parent reply other threads:[~2009-11-28 3:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-27 3:02 Boot problems on a V880 Patrick Finnegan
2009-11-27 7:30 ` David Miller
2009-11-28 1:52 ` Patrick Finnegan
2009-11-28 2:30 ` David Miller
2009-11-28 3:07 ` Patrick Finnegan [this message]
2009-11-30 21:02 ` Patrick Finnegan
2009-11-30 21:05 ` David Miller
2009-12-01 4:04 ` Patrick Finnegan
2009-12-01 5:48 ` David Miller
2009-12-03 6:48 ` Patrick Finnegan
2009-12-03 6:56 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200911272207.09314.pat@computer-refuge.org \
--to=pat@computer-refuge.org \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.