From: ben@fluff.org.uk
To: netdev@vger.kernel.org
Cc: linux@simtec.co.uk, doong.ping@micrel.com,
tristram.ha@micrel.com, Ben Dooks <ben-linux@fluff.org>
Subject: [patch 6/9] KS8851: ks8851_mll.c: Use the ks8851.h header for device register defines
Date: Mon, 07 Dec 2009 12:15:07 +0000 [thread overview]
Message-ID: <20091207121647.021947810@fluff.org.uk> (raw)
In-Reply-To: 20091207121501.819539008@fluff.org.uk
[-- Attachment #1: ks8851-reduce-header-duplication.patch --]
[-- Type: text/plain, Size: 9425 bytes --]
From: Ben Dooks <ben-linux@fluff.org>
The ks8851_mll.c file uses an almost identical copy of ks8851.h included
directly into the source code, baring some identation changes. This patch
removes the commone defines from ks8851_mll.c and includes ks8851.h.
As a note, we did not merge anything that is specific in ks8851_mll.c into
ks8851.h yet.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
drivers/net/ks8851_mll.c | 263 -----------------------------------------------
1 file changed, 5 insertions(+), 258 deletions(-)
Index: b/drivers/net/ks8851_mll.c
===================================================================
--- a/drivers/net/ks8851_mll.c 2009-12-07 10:52:31.000000000 +0000
+++ b/drivers/net/ks8851_mll.c 2009-12-07 11:21:15.000000000 +0000
@@ -32,6 +32,8 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include "ks8851.h"
+
#define DRV_NAME "ks8851_mll"
static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 };
@@ -40,165 +42,26 @@ static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0
#define TX_BUF_SIZE 2000
#define RX_BUF_SIZE 2000
-#define KS_CCR 0x08
-#define CCR_EEPROM (1 << 9)
-#define CCR_SPI (1 << 8)
#define CCR_8BIT (1 << 7)
#define CCR_16BIT (1 << 6)
#define CCR_32BIT (1 << 5)
#define CCR_SHARED (1 << 4)
-#define CCR_32PIN (1 << 0)
-
-/* MAC address registers */
-#define KS_MARL 0x10
-#define KS_MARM 0x12
-#define KS_MARH 0x14
-#define KS_OBCR 0x20
#define OBCR_ODS_16MA (1 << 6)
-#define KS_EEPCR 0x22
-#define EEPCR_EESA (1 << 4)
-#define EEPCR_EESB (1 << 3)
-#define EEPCR_EEDO (1 << 2)
-#define EEPCR_EESCK (1 << 1)
-#define EEPCR_EECS (1 << 0)
-
-#define KS_MBIR 0x24
-#define MBIR_TXMBF (1 << 12)
-#define MBIR_TXMBFA (1 << 11)
-#define MBIR_RXMBF (1 << 4)
-#define MBIR_RXMBFA (1 << 3)
-
-#define KS_GRR 0x26
-#define GRR_QMU (1 << 1)
-#define GRR_GSR (1 << 0)
-
-#define KS_WFCR 0x2A
-#define WFCR_MPRXE (1 << 7)
-#define WFCR_WF3E (1 << 3)
-#define WFCR_WF2E (1 << 2)
-#define WFCR_WF1E (1 << 1)
-#define WFCR_WF0E (1 << 0)
-
-#define KS_WF0CRC0 0x30
-#define KS_WF0CRC1 0x32
-#define KS_WF0BM0 0x34
-#define KS_WF0BM1 0x36
-#define KS_WF0BM2 0x38
-#define KS_WF0BM3 0x3A
-
-#define KS_WF1CRC0 0x40
-#define KS_WF1CRC1 0x42
-#define KS_WF1BM0 0x44
-#define KS_WF1BM1 0x46
-#define KS_WF1BM2 0x48
-#define KS_WF1BM3 0x4A
-
-#define KS_WF2CRC0 0x50
-#define KS_WF2CRC1 0x52
-#define KS_WF2BM0 0x54
-#define KS_WF2BM1 0x56
-#define KS_WF2BM2 0x58
-#define KS_WF2BM3 0x5A
-
-#define KS_WF3CRC0 0x60
-#define KS_WF3CRC1 0x62
-#define KS_WF3BM0 0x64
-#define KS_WF3BM1 0x66
-#define KS_WF3BM2 0x68
-#define KS_WF3BM3 0x6A
-
-#define KS_TXCR 0x70
-#define TXCR_TCGICMP (1 << 8)
-#define TXCR_TCGUDP (1 << 7)
-#define TXCR_TCGTCP (1 << 6)
-#define TXCR_TCGIP (1 << 5)
-#define TXCR_FTXQ (1 << 4)
-#define TXCR_TXFCE (1 << 3)
-#define TXCR_TXPE (1 << 2)
-#define TXCR_TXCRC (1 << 1)
-#define TXCR_TXE (1 << 0)
-
-#define KS_TXSR 0x72
-#define TXSR_TXLC (1 << 13)
-#define TXSR_TXMC (1 << 12)
-#define TXSR_TXFID_MASK (0x3f << 0)
-#define TXSR_TXFID_SHIFT (0)
-#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f)
-
-
-#define KS_RXCR1 0x74
-#define RXCR1_FRXQ (1 << 15)
-#define RXCR1_RXUDPFCC (1 << 14)
-#define RXCR1_RXTCPFCC (1 << 13)
-#define RXCR1_RXIPFCC (1 << 12)
-#define RXCR1_RXPAFMA (1 << 11)
-#define RXCR1_RXFCE (1 << 10)
-#define RXCR1_RXEFE (1 << 9)
-#define RXCR1_RXMAFMA (1 << 8)
-#define RXCR1_RXBE (1 << 7)
-#define RXCR1_RXME (1 << 6)
-#define RXCR1_RXUE (1 << 5)
-#define RXCR1_RXAE (1 << 4)
-#define RXCR1_RXINVF (1 << 1)
-#define RXCR1_RXE (1 << 0)
#define RXCR1_FILTER_MASK (RXCR1_RXINVF | RXCR1_RXAE | \
RXCR1_RXMAFMA | RXCR1_RXPAFMA)
-#define KS_RXCR2 0x76
-#define RXCR2_SRDBL_MASK (0x7 << 5)
-#define RXCR2_SRDBL_SHIFT (5)
-#define RXCR2_SRDBL_4B (0x0 << 5)
-#define RXCR2_SRDBL_8B (0x1 << 5)
-#define RXCR2_SRDBL_16B (0x2 << 5)
-#define RXCR2_SRDBL_32B (0x3 << 5)
-/* #define RXCR2_SRDBL_FRAME (0x4 << 5) */
-#define RXCR2_IUFFP (1 << 4)
-#define RXCR2_RXIUFCEZ (1 << 3)
-#define RXCR2_UDPLFE (1 << 2)
-#define RXCR2_RXICMPFCC (1 << 1)
-#define RXCR2_RXSAF (1 << 0)
-
-#define KS_TXMIR 0x78
-
-#define KS_RXFHSR 0x7C
-#define RXFSHR_RXFV (1 << 15)
-#define RXFSHR_RXICMPFCS (1 << 13)
-#define RXFSHR_RXIPFCS (1 << 12)
-#define RXFSHR_RXTCPFCS (1 << 11)
-#define RXFSHR_RXUDPFCS (1 << 10)
-#define RXFSHR_RXBF (1 << 7)
-#define RXFSHR_RXMF (1 << 6)
-#define RXFSHR_RXUF (1 << 5)
-#define RXFSHR_RXMR (1 << 4)
-#define RXFSHR_RXFT (1 << 3)
-#define RXFSHR_RXFTL (1 << 2)
-#define RXFSHR_RXRF (1 << 1)
-#define RXFSHR_RXCE (1 << 0)
+#undef RXCR2_SRDBL_FRAME
+
#define RXFSHR_ERR (RXFSHR_RXCE | RXFSHR_RXRF |\
RXFSHR_RXFTL | RXFSHR_RXMR |\
RXFSHR_RXICMPFCS | RXFSHR_RXIPFCS |\
RXFSHR_RXTCPFCS)
+
#define KS_RXFHBCR 0x7E
#define RXFHBCR_CNT_MASK 0x0FFF
-#define KS_TXQCR 0x80
-#define TXQCR_AETFE (1 << 2)
-#define TXQCR_TXQMAM (1 << 1)
-#define TXQCR_METFE (1 << 0)
-
-#define KS_RXQCR 0x82
-#define RXQCR_RXDTTS (1 << 12)
-#define RXQCR_RXDBCTS (1 << 11)
-#define RXQCR_RXFCTS (1 << 10)
-#define RXQCR_RXIPHTOE (1 << 9)
-#define RXQCR_RXDTTE (1 << 7)
-#define RXQCR_RXDBCTE (1 << 6)
-#define RXQCR_RXFCTE (1 << 5)
-#define RXQCR_ADRFE (1 << 4)
-#define RXQCR_SDA (1 << 3)
-#define RXQCR_RRXEF (1 << 0)
#define RXQCR_CMD_CNTL (RXQCR_RXFCTE|RXQCR_ADRFE)
#define KS_TXFDPR 0x84
@@ -209,130 +72,14 @@ static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0
#define KS_RXFDPR 0x86
#define RXFDPR_RXFPAI (1 << 14)
-#define KS_RXDTTR 0x8C
-#define KS_RXDBCTR 0x8E
-
-#define KS_IER 0x90
-#define KS_ISR 0x92
-#define IRQ_LCI (1 << 15)
-#define IRQ_TXI (1 << 14)
-#define IRQ_RXI (1 << 13)
-#define IRQ_RXOI (1 << 11)
-#define IRQ_TXPSI (1 << 9)
-#define IRQ_RXPSI (1 << 8)
-#define IRQ_TXSAI (1 << 6)
-#define IRQ_RXWFDI (1 << 5)
-#define IRQ_RXMPDI (1 << 4)
-#define IRQ_LDI (1 << 3)
-#define IRQ_EDI (1 << 2)
-#define IRQ_SPIBEI (1 << 1)
-#define IRQ_DEDI (1 << 0)
-
-#define KS_RXFCTR 0x9C
#define RXFCTR_THRESHOLD_MASK 0x00FF
-#define KS_RXFC 0x9D
-#define RXFCTR_RXFC_MASK (0xff << 8)
-#define RXFCTR_RXFC_SHIFT (8)
-#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff)
-#define RXFCTR_RXFCT_MASK (0xff << 0)
-#define RXFCTR_RXFCT_SHIFT (0)
-
-#define KS_TXNTFSR 0x9E
-
-#define KS_MAHTR0 0xA0
-#define KS_MAHTR1 0xA2
-#define KS_MAHTR2 0xA4
-#define KS_MAHTR3 0xA6
-
-#define KS_FCLWR 0xB0
-#define KS_FCHWR 0xB2
-#define KS_FCOWR 0xB4
-
-#define KS_CIDER 0xC0
-#define CIDER_ID 0x8870
-#define CIDER_REV_MASK (0x7 << 1)
-#define CIDER_REV_SHIFT (1)
-#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7)
-
-#define KS_CGCR 0xC6
-#define KS_IACR 0xC8
-#define IACR_RDEN (1 << 12)
-#define IACR_TSEL_MASK (0x3 << 10)
-#define IACR_TSEL_SHIFT (10)
-#define IACR_TSEL_MIB (0x3 << 10)
-#define IACR_ADDR_MASK (0x1f << 0)
-#define IACR_ADDR_SHIFT (0)
-
-#define KS_IADLR 0xD0
-#define KS_IAHDR 0xD2
-
-#define KS_PMECR 0xD4
-#define PMECR_PME_DELAY (1 << 14)
-#define PMECR_PME_POL (1 << 12)
-#define PMECR_WOL_WAKEUP (1 << 11)
-#define PMECR_WOL_MAGICPKT (1 << 10)
-#define PMECR_WOL_LINKUP (1 << 9)
-#define PMECR_WOL_ENERGY (1 << 8)
-#define PMECR_AUTO_WAKE_EN (1 << 7)
-#define PMECR_WAKEUP_NORMAL (1 << 6)
-#define PMECR_WKEVT_MASK (0xf << 2)
-#define PMECR_WKEVT_SHIFT (2)
-#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf)
-#define PMECR_WKEVT_ENERGY (0x1 << 2)
-#define PMECR_WKEVT_LINK (0x2 << 2)
-#define PMECR_WKEVT_MAGICPKT (0x4 << 2)
-#define PMECR_WKEVT_FRAME (0x8 << 2)
-#define PMECR_PM_MASK (0x3 << 0)
-#define PMECR_PM_SHIFT (0)
-#define PMECR_PM_NORMAL (0x0 << 0)
-#define PMECR_PM_ENERGY (0x1 << 0)
-#define PMECR_PM_SOFTDOWN (0x2 << 0)
-#define PMECR_PM_POWERSAVE (0x3 << 0)
-
-/* Standard MII PHY data */
-#define KS_P1MBCR 0xE4
#define P1MBCR_FORCE_FDX (1 << 8)
-#define KS_P1MBSR 0xE6
#define P1MBSR_AN_COMPLETE (1 << 5)
#define P1MBSR_AN_CAPABLE (1 << 3)
#define P1MBSR_LINK_UP (1 << 2)
-#define KS_PHY1ILR 0xE8
-#define KS_PHY1IHR 0xEA
-#define KS_P1ANAR 0xEC
-#define KS_P1ANLPR 0xEE
-
-#define KS_P1SCLMD 0xF4
-#define P1SCLMD_LEDOFF (1 << 15)
-#define P1SCLMD_TXIDS (1 << 14)
-#define P1SCLMD_RESTARTAN (1 << 13)
-#define P1SCLMD_DISAUTOMDIX (1 << 10)
-#define P1SCLMD_FORCEMDIX (1 << 9)
-#define P1SCLMD_AUTONEGEN (1 << 7)
-#define P1SCLMD_FORCE100 (1 << 6)
-#define P1SCLMD_FORCEFDX (1 << 5)
-#define P1SCLMD_ADV_FLOW (1 << 4)
-#define P1SCLMD_ADV_100BT_FDX (1 << 3)
-#define P1SCLMD_ADV_100BT_HDX (1 << 2)
-#define P1SCLMD_ADV_10BT_FDX (1 << 1)
-#define P1SCLMD_ADV_10BT_HDX (1 << 0)
-
-#define KS_P1CR 0xF6
-#define P1CR_HP_MDIX (1 << 15)
-#define P1CR_REV_POL (1 << 13)
-#define P1CR_OP_100M (1 << 10)
-#define P1CR_OP_FDX (1 << 9)
-#define P1CR_OP_MDI (1 << 7)
-#define P1CR_AN_DONE (1 << 6)
-#define P1CR_LINK_GOOD (1 << 5)
-#define P1CR_PNTR_FLOW (1 << 4)
-#define P1CR_PNTR_100BT_FDX (1 << 3)
-#define P1CR_PNTR_100BT_HDX (1 << 2)
-#define P1CR_PNTR_10BT_FDX (1 << 1)
-#define P1CR_PNTR_10BT_HDX (1 << 0)
-
/* TX Frame control */
#define TXFR_TXIC (1 << 15)
next prev parent reply other threads:[~2009-12-07 12:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20091207121501.819539008@fluff.org.uk>
2009-12-07 12:15 ` [patch 1/9] eeprom_93cx6: Add data direction control ben
2009-12-07 12:34 ` Ben Dooks
2009-12-07 12:15 ` [patch 2/9] eeprom_93cx6: Add write support ben
2009-12-07 12:15 ` [patch 3/9] KS8851: Add support for EEPROM MAC address ben
2009-12-09 4:45 ` David Miller
2009-12-07 12:15 ` [patch 4/9] KS8851: Add ethtool support for EEPROM ben
2009-12-07 12:15 ` [patch 5/9] KS8851: Add debugfs export for driver state ben
2009-12-07 12:15 ` ben [this message]
2009-12-07 12:15 ` [patch 7/9] KS8851: Update ks8851.h header from ks8851_mll.c ben
2009-12-07 12:15 ` [patch 8/9] KS8851: Use the ks8851.h header to hold union ks8851_tx_hdr ben
2009-12-07 12:15 ` [patch 9/9] KS8851: Add platform data to specific IRQ trigger type ben
[not found] <20091207121727.016092171@fluff.org.uk>
2009-12-07 12:17 ` [patch 6/9] KS8851: ks8851_mll.c: Use the ks8851.h header for device register defines Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091207121647.021947810@fluff.org.uk \
--to=ben@fluff.org.uk \
--cc=ben-linux@fluff.org \
--cc=doong.ping@micrel.com \
--cc=linux@simtec.co.uk \
--cc=netdev@vger.kernel.org \
--cc=tristram.ha@micrel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.