[patch 7/9] KS8851: Update ks8851.h header from ks8851_mll.c

[ben@fluff.org.uk]

[-- Attachment #1: ks8851-reduce-header-duplication2.patch --]
[-- Type: text/plain, Size: 4080 bytes --]

Move more useful definitions from ks8851_mll.c into ks8851.h and include
a brief copyright update from the mll source file. Also mop up a few
definitions that got missed in the first patch.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>

---

Index: b/drivers/net/ks8851.h
===================================================================
--- a/drivers/net/ks8851.h	2009-12-07 11:20:52.000000000 +0000
+++ b/drivers/net/ks8851.h	2009-12-07 11:21:21.000000000 +0000
@@ -3,6 +3,9 @@
  * Copyright 2009 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
+ * portions from drivers/net/ks8851_mll.c,
+ *	Copyright (c) 2009 Micrel Inc.
+ *
  * KS8851 register definitions
  *
  * This program is free software; you can redistribute it and/or modify
@@ -13,6 +16,10 @@
 #define KS_CCR					0x08
 #define CCR_EEPROM				(1 << 9)
 #define CCR_SPI					(1 << 8)
+#define CCR_8BIT				(1 << 7)
+#define CCR_16BIT				(1 << 6)
+#define CCR_32BIT				(1 << 5)
+#define CCR_SHARED				(1 << 4)
 #define CCR_32PIN				(1 << 0)
 
 /* MAC address registers */
@@ -250,7 +257,13 @@
 
 /* Standard MII PHY data */
 #define KS_P1MBCR				0xE4
+#define P1MBCR_FORCE_FDX			(1 << 8)
+
 #define KS_P1MBSR				0xE6
+#define P1MBSR_AN_COMPLETE			(1 << 5)
+#define P1MBSR_AN_CAPABLE			(1 << 3)
+#define P1MBSR_LINK_UP				(1 << 2)
+
 #define KS_PHY1ILR				0xE8
 #define KS_PHY1IHR				0xEA
 #define KS_P1ANAR				0xEC
@@ -285,6 +298,20 @@
 #define P1CR_PNTR_10BT_FDX			(1 << 1)
 #define P1CR_PNTR_10BT_HDX			(1 << 0)
 
+#define KS_P1SR					0xF8
+#define P1SR_HP_MDIX				(1 << 15)
+#define P1SR_REV_POL				(1 << 13)
+#define P1SR_OP_100M				(1 << 10)
+#define P1SR_OP_FDX				(1 << 9)
+#define P1SR_OP_MDI				(1 << 7)
+#define P1SR_AN_DONE				(1 << 6)
+#define P1SR_LINK_GOOD				(1 << 5)
+#define P1SR_PNTR_FLOW				(1 << 4)
+#define P1SR_PNTR_100BT_FDX			(1 << 3)
+#define P1SR_PNTR_100BT_HDX			(1 << 2)
+#define P1SR_PNTR_10BT_FDX			(1 << 1)
+#define P1SR_PNTR_10BT_HDX			(1 << 0)
+
 /* TX Frame control */
 
 #define TXFR_TXIC				(1 << 15)
Index: b/drivers/net/ks8851_mll.c
===================================================================
--- a/drivers/net/ks8851_mll.c	2009-12-07 11:21:15.000000000 +0000
+++ b/drivers/net/ks8851_mll.c	2009-12-07 11:22:47.000000000 +0000
@@ -42,13 +42,6 @@ static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0
 #define TX_BUF_SIZE			2000
 #define RX_BUF_SIZE			2000
 
-#define CCR_8BIT			(1 << 7)
-#define CCR_16BIT			(1 << 6)
-#define CCR_32BIT			(1 << 5)
-#define CCR_SHARED			(1 << 4)
-
-#define OBCR_ODS_16MA			(1 << 6)
-
 #define RXCR1_FILTER_MASK    		(RXCR1_RXINVF | RXCR1_RXAE | \
 					 RXCR1_RXMAFMA | RXCR1_RXPAFMA)
 
@@ -64,41 +57,10 @@ static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0
 
 #define RXQCR_CMD_CNTL                	(RXQCR_RXFCTE|RXQCR_ADRFE)
 
-#define KS_TXFDPR			0x84
-#define TXFDPR_TXFPAI			(1 << 14)
-#define TXFDPR_TXFP_MASK		(0x7ff << 0)
-#define TXFDPR_TXFP_SHIFT		(0)
-
-#define KS_RXFDPR			0x86
-#define RXFDPR_RXFPAI			(1 << 14)
-
 #define RXFCTR_THRESHOLD_MASK     	0x00FF
 
-#define P1MBCR_FORCE_FDX		(1 << 8)
-
-#define P1MBSR_AN_COMPLETE		(1 << 5)
-#define P1MBSR_AN_CAPABLE		(1 << 3)
-#define P1MBSR_LINK_UP			(1 << 2)
-
 /* TX Frame control */
 
-#define TXFR_TXIC			(1 << 15)
-#define TXFR_TXFID_MASK			(0x3f << 0)
-#define TXFR_TXFID_SHIFT		(0)
-
-#define KS_P1SR				0xF8
-#define P1SR_HP_MDIX			(1 << 15)
-#define P1SR_REV_POL			(1 << 13)
-#define P1SR_OP_100M			(1 << 10)
-#define P1SR_OP_FDX			(1 << 9)
-#define P1SR_OP_MDI			(1 << 7)
-#define P1SR_AN_DONE			(1 << 6)
-#define P1SR_LINK_GOOD			(1 << 5)
-#define P1SR_PNTR_FLOW			(1 << 4)
-#define P1SR_PNTR_100BT_FDX		(1 << 3)
-#define P1SR_PNTR_100BT_HDX		(1 << 2)
-#define P1SR_PNTR_10BT_FDX		(1 << 1)
-#define P1SR_PNTR_10BT_HDX		(1 << 0)
 
 #define	ENUM_BUS_NONE			0
 #define	ENUM_BUS_8BIT			1
@@ -1360,7 +1322,7 @@ static int __devinit ks8851_probe(struct
 	memcpy(netdev->dev_addr, ks->mac_addr, 6);
 
 	data = ks_rdreg16(ks, KS_OBCR);
-	ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16MA);
+	ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16mA);
 
 	/**
 	 * If you want to use the default MAC addr,