* [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices
@ 2009-12-14 9:12 Sander Eikelenboom
2009-12-14 9:31 ` Sander Eikelenboom
2009-12-14 14:54 ` Konrad Rzeszutek Wilk
0 siblings, 2 replies; 7+ messages in thread
From: Sander Eikelenboom @ 2009-12-14 9:12 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 552 bytes --]
Hi Konrad,
I was trying 2.6.31.6 pvops on my xen-3.4.2 server passing through 3 pci-devices, but none seems to get seized by pciback.
On xen-3.4.2 in combination with a xenified 2.6.29 kernel/ 2.6.18.8-xen kernel it works fine with the same config in grub.
Could this be due to the renaming stuff of blkdev pciback to xen-blkdev xen-pciback etc. ?
Attachted:
- xm info
- xm dmesg
- dmesg
- lspci -vvvknn
- .config 2.6.31.6 pvops kernel
- grub menu.lst
(if it helps i could send the same for the working combination.
--
Sander
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 67671 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31.6
# Sun Dec 13 23:14:56 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_VSYSCALL=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_EVENT_PROFILE=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_TIME_VSYSCALL=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_DOM0_PCI=y
CONFIG_MICROCODE_XEN=y
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_CLOCK_VSYSCALL=y
CONFIG_PARAVIRT_DEBUG=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_NEW_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_IMQ=m
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_IMQ=m
# CONFIG_IMQ_BEHAVIOR_AA is not set
CONFIG_IMQ_BEHAVIOR_AB=y
# CONFIG_IMQ_BEHAVIOR_BA is not set
# CONFIG_IMQ_BEHAVIOR_BB is not set
CONFIG_IMQ_NUM_DEVS=16
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH_COMMON=y
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETCHANNEL2 is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_BLKDEV_TAP=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XEN_PCIDEV_BACKEND=y
# CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set
CONFIG_XEN_PCIDEV_BACKEND_PASS=y
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set
CONFIG_XEN_PCIDEV_BE_DEBUG=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_S3=y
CONFIG_ACPI_PROCESSOR_XEN=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_TRACE is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 115458 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.6 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sun Dec 13 23:35:36 CET 2009
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen max_loop=255 pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 30000-afee0
[ 0.000000] xen_release_chunk: looking at area pfn aff00-b0000
[ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000
[ 0.000000] xen_release_chunk: looking at area pfn f4000-fec00
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
[ 0.000000] Xen: 00000000afee3000 - 00000000afef0000 (ACPI data)
[ 0.000000] Xen: 00000000afef0000 - 00000000aff00000 (reserved)
[ 0.000000] Xen: 00000000b0000000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
[ 0.000000] modified: 00000000afee3000 - 00000000afef0000 (ACPI data)
[ 0.000000] modified: 00000000afef0000 - 00000000aff00000 (reserved)
[ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] 0000000000 - 0030000000 page 4k
[ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000
[ 0.000000] RAMDISK: 01aca000 - 02094000
[ 0.000000] ACPI: RSDP 00000000000f7550 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000afee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000afeed3c0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558
[ 0.000000] ACPI: DSDT 00000000afee3280 0A0D8 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000afee0a80 00040
[ 0.000000] ACPI: SSDT 00000000afeed600 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000afeed900 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000afeed980 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000afeed500 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002215000 - 000222a000] XEN PAGETABLES ==> [0002215000 - 000222a000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001aa9574] TEXT DATA BSS ==> [0001000000 - 0001aa9574]
[ 0.000000] #4 [0001aca000 - 0002094000] RAMDISK ==> [0001aca000 - 0002094000]
[ 0.000000] #5 [0002094000 - 0002215000] XEN START INFO ==> [0002094000 - 0002215000]
[ 0.000000] #6 [0001aaa000 - 0001aaa151] BRK ==> [0001aaa000 - 0001aaa151]
[ 0.000000] #7 [0000100000 - 000026a000] PGTABLE ==> [0000100000 - 000026a000]
[ 0.000000] found SMP MP-table at [ffff8800000f59c0] f59c0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] On node 0 totalpages: 196495
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 365 pages reserved
[ 0.000000] DMA zone: 3562 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 2632 pages used for memmap
[ 0.000000] DMA32 zone: 189880 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:7fee0000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 22 4k pages, static data 88160 bytes
[ 0.000000] trying to map vcpu_info 0 at ffffc9000000b060, mfn 1f6241, offset 96
[ 0.000000] cpu 0 using vcpu_info at ffffc9000000b060
[ 0.000000] trying to map vcpu_info 1 at ffffc90000023060, mfn 1f6257, offset 96
[ 0.000000] cpu 1 using vcpu_info at ffffc90000023060
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193442
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen max_loop=255 pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)
[ 0.000000] Unknown boot option `pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)': ignoring
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
[ 0.000000] xen_swiotlb_fixup: buf=ffff8800030ab000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000710b000 size=32768
[ 0.000000] Placing 64MB Xen software IO TLB between ffff8800030ab000 - ffff8800070ab000
[ 0.000000] Xen software IO TLB at phys 0x30ab000 - 0x70ab000
[ 0.000000] Memory: 686848k/786432k available (5640k kernel code, 452k absent, 98460k reserved, 3626k data, 528k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] xen: registering gsi 0 triggering 1 polarity 0
[ 0.000000] xen: --> irq=0
[ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 1 triggering 1 polarity 0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 3 triggering 1 polarity 0
[ 0.000000] xen: --> irq=3
[ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 4 triggering 1 polarity 0
[ 0.000000] xen: --> irq=4
[ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 5 triggering 1 polarity 0
[ 0.000000] xen: --> irq=5
[ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 6 triggering 1 polarity 0
[ 0.000000] xen: --> irq=6
[ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 7 triggering 1 polarity 0
[ 0.000000] xen: --> irq=7
[ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 8 triggering 1 polarity 0
[ 0.000000] xen: --> irq=8
[ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen: --> irq=9
[ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
[ 0.000000] xen: registering gsi 10 triggering 1 polarity 0
[ 0.000000] xen: --> irq=10
[ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 11 triggering 1 polarity 0
[ 0.000000] xen: --> irq=11
[ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 12 triggering 1 polarity 0
[ 0.000000] xen: --> irq=12
[ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 13 triggering 1 polarity 0
[ 0.000000] xen: --> irq=13
[ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 14 triggering 1 polarity 0
[ 0.000000] xen: --> irq=14
[ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 15 triggering 1 polarity 0
[ 0.000000] xen: --> irq=15
[ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
[ 0.000000] Detected 2500.002 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [tty1]
[ 0.000999] console [hvc0] enabled
[ 0.000999] Xen: using vcpuop timer interface
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] alloc irq_desc for 423 on node 0
[ 0.000999] alloc kstat_irqs on node 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.00 BogoMIPS (lpj=2500002)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 256
[ 0.001191] Initializing cgroup subsys ns
[ 0.001396] Initializing cgroup subsys cpuacct
[ 0.001599] Initializing cgroup subsys freezer
[ 0.001823] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.002004] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.002207] tseg: 00aff00000
[ 0.002210] CPU: Physical Processor ID: 0
[ 0.002409] CPU: Processor Core ID: 0
[ 0.002636] mce: CPU supports 5 MCE banks
[ 0.002855] Performance Counters: AMD PMU driver.
[ 0.002999] ------------[ cut here ]------------
[ 0.002999] WARNING: at /usr/src/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:720 xen_apic_write+0x15/0x17()
[ 0.002999] Hardware name: System Product Name
[ 0.002999] Modules linked in:
[ 0.002999] Pid: 0, comm: swapper Not tainted 2.6.31.6 #1
[ 0.002999] Call Trace:
[ 0.002999] [<ffffffff8102b7b6>] ? xen_apic_write+0x15/0x17
[ 0.002999] [<ffffffff8106bdb4>] warn_slowpath_common+0x77/0xa4
[ 0.002999] [<ffffffff8106bdf0>] warn_slowpath_null+0xf/0x11
[ 0.002999] [<ffffffff8102b7b6>] xen_apic_write+0x15/0x17
[ 0.002999] [<ffffffff8103f4a7>] perf_counters_lapic_init+0x2e/0x30
[ 0.002999] [<ffffffff8192d8c9>] init_hw_perf_counters+0x305/0x3a2
[ 0.002999] [<ffffffff8102f7ff>] ? xen_restore_fl_direct_end+0x0/0x1
[ 0.002999] [<ffffffff810fac40>] ? kmem_cache_alloc+0xcb/0x12d
[ 0.002999] [<ffffffff8192d595>] identify_boot_cpu+0x3c/0x3e
[ 0.002999] [<ffffffff8192d5a0>] check_bugs+0x9/0x2d
[ 0.002999] [<ffffffff81924630>] start_kernel+0x41d/0x432
[ 0.002999] [<ffffffff81923b1f>] x86_64_start_reservations+0xaa/0xae
[ 0.002999] [<ffffffff8192829a>] xen_start_kernel+0x633/0x63a
[ 0.002999] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.002999] ... version: 0
[ 0.002999] ... bit width: 48
[ 0.002999] ... generic counters: 4
[ 0.002999] ... value mask: 0000ffffffffffff
[ 0.002999] ... max period: 00007fffffffffff
[ 0.002999] ... fixed-purpose counters: 0
[ 0.002999] ... counter mask: 000000000000000f
[ 0.002999] SMP alternatives: switching to UP code
[ 0.002999] ACPI: Core revision 20090521
[ 0.023106] alloc irq_desc for 422 on node 0
[ 0.023110] alloc kstat_irqs on node 0
[ 0.023121] alloc irq_desc for 421 on node 0
[ 0.023124] alloc kstat_irqs on node 0
[ 0.023131] alloc irq_desc for 420 on node 0
[ 0.023133] alloc kstat_irqs on node 0
[ 0.023139] alloc irq_desc for 419 on node 0
[ 0.023141] alloc kstat_irqs on node 0
[ 0.023330] installing Xen timer for CPU 1
[ 0.023539] alloc irq_desc for 418 on node 0
[ 0.023541] alloc kstat_irqs on node 0
[ 0.023580] SMP alternatives: switching to SMP code
[ 0.023996] alloc irq_desc for 417 on node 0
[ 0.023996] alloc kstat_irqs on node 0
[ 0.024012] alloc irq_desc for 416 on node 0
[ 0.024015] alloc kstat_irqs on node 0
[ 0.024021] alloc irq_desc for 415 on node 0
[ 0.024024] alloc kstat_irqs on node 0
[ 0.024030] alloc irq_desc for 414 on node 0
[ 0.024033] alloc kstat_irqs on node 0
[ 0.000020] Initializing CPU#1
[ 0.000081] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000084] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000087] CPU: Physical Processor ID: 0
[ 0.000089] CPU: Processor Core ID: 1
[ 0.000092] mce: CPU supports 5 MCE banks
[ 0.024187] Brought up 2 CPUs
[ 0.025173] Booting paravirtualized kernel on Xen
[ 0.025209] Xen version: 4.0.0-rc1-pre (preserve-AD) (dom0)
[ 0.026035] Grant tables using version 2 layout.
[ 0.026259] Grant table initialized
[ 0.026534] Time: 8:55:02 Date: 12/14/09
[ 0.026801] NET: Registered protocol family 16
[ 0.027067] alloc irq_desc for 413 on node 0
[ 0.027067] alloc kstat_irqs on node 0
[ 0.027110] xenbus_probe_init ok
[ 0.028051] node 0 link 0: io port [9000, ffff]
[ 0.028051] TOM: 00000000c0000000 aka 3072M
[ 0.028255] node 0 link 0: mmio [a0000, bffff]
[ 0.028261] node 0 link 0: mmio [c0000000, efffffff]
[ 0.028268] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.028274] node 0 link 0: mmio [f0000000, f07fffff]
[ 0.028280] TOM2: 0000000200000000 aka 8192M
[ 0.028481] bus: [00,07] on node 0 link 0
[ 0.028484] bus: 00 index 0 io port: [0, ffff]
[ 0.028487] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.028491] bus: 00 index 2 mmio: [c0000000, f3ffffff]
[ 0.028494] bus: 00 index 3 mmio: [f4000000, ffffffff]
[ 0.028497] bus: 00 index 4 mmio: [200000000, fcffffffff]
[ 0.028515] ACPI: bus type pci registered
[ 0.028734] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.028734] PCI: MCFG area at f0000000 reserved in E820
[ 0.044844] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.044993] PCI: Using configuration type 1 for base access
[ 0.061077] bio: create slab <bio-0> at 0
[ 0.066074] ACPI: EC: Look up EC in DSDT
[ 0.089949] ACPI: Interpreter enabled
[ 0.089986] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.089986] ACPI: Using IOAPIC for interrupt routing
[ 0.127184] ACPI: No dock devices found.
[ 0.127896] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.128428] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f]
[ 0.128456] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.128466] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.128505] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.128715] pci 0000:00:01.1: PME# disabled
[ 0.129092] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff]
[ 0.129318] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.129380] pci 0000:00:02.0: supports D1 D2
[ 0.129383] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.129592] pci 0000:00:02.0: PME# disabled
[ 0.129845] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.129918] pci 0000:00:02.1: supports D1 D2
[ 0.129921] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.129980] pci 0000:00:02.1: PME# disabled
[ 0.130036] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.130098] pci 0000:00:04.0: supports D1 D2
[ 0.130101] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130310] pci 0000:00:04.0: PME# disabled
[ 0.130564] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.130636] pci 0000:00:04.1: supports D1 D2
[ 0.130639] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130848] pci 0000:00:04.1: PME# disabled
[ 0.131058] pci 0000:00:06.0: reg 20 io port: [0xfc00-0xfc0f]
[ 0.131140] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
[ 0.131203] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.131418] pci 0000:00:07.0: PME# disabled
[ 0.131777] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.131785] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.131794] pci 0000:00:09.0: reg 18 io port: [0x970-0x977]
[ 0.131803] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73]
[ 0.131811] pci 0000:00:09.0: reg 20 io port: [0xf700-0xf70f]
[ 0.131820] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff]
[ 0.131935] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.131944] pci 0000:00:0a.0: reg 14 io port: [0xf600-0xf607]
[ 0.131953] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff]
[ 0.131962] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f]
[ 0.131979] pci 0000:00:0a.0: supports D1 D2
[ 0.131979] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131979] pci 0000:00:0a.0: PME# disabled
[ 0.132072] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.132306] pci 0000:00:0b.0: PME# disabled
[ 0.132797] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.132979] pci 0000:00:10.0: PME# disabled
[ 0.133259] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133476] pci 0000:00:12.0: PME# disabled
[ 0.133979] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133979] pci 0000:00:13.0: PME# disabled
[ 0.134257] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.134470] pci 0000:00:14.0: PME# disabled
[ 0.135065] pci 0000:01:08.0: reg 20 io port: [0xec00-0xec1f]
[ 0.135109] pci 0000:01:08.0: supports D1 D2
[ 0.135112] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.135321] pci 0000:01:08.0: PME# disabled
[ 0.135620] pci 0000:01:08.1: reg 20 io port: [0xe800-0xe81f]
[ 0.135664] pci 0000:01:08.1: supports D1 D2
[ 0.135667] pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.135876] pci 0000:01:08.1: PME# disabled
[ 0.136025] pci 0000:01:08.2: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff]
[ 0.136098] pci 0000:01:08.2: supports D1 D2
[ 0.136101] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.136310] pci 0000:01:08.2: PME# disabled
[ 0.136572] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfdefe000-0xfdefefff]
[ 0.136644] pci 0000:01:0a.0: supports D1 D2
[ 0.136647] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.136880] pci 0000:01:0a.0: PME# disabled
[ 0.137030] pci 0000:00:08.0: transparent bridge
[ 0.137235] pci 0000:00:08.0: bridge io port: [0xe000-0xefff]
[ 0.137241] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.137247] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.137301] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.137315] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
[ 0.137329] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff]
[ 0.137338] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.137346] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.137440] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff]
[ 0.137446] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
[ 0.137455] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd8000000-0xe7ffffff]
[ 0.137558] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff]
[ 0.137568] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.137587] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.137691] pci 0000:00:12.0: bridge io port: [0xb000-0xbfff]
[ 0.137702] pci 0000:00:12.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.137721] pci 0000:00:12.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.137877] pci 0000:05:00.0: supports D1 D2
[ 0.137978] pci 0000:00:13.0: bridge io port: [0xa000-0xafff]
[ 0.137978] pci 0000:00:13.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.137978] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
[ 0.138066] pci 0000:06:01.0: reg 10 32bit mmio: [0xfd8ff000-0xfd8fffff]
[ 0.138168] pci 0000:06:01.0: supports D1 D2
[ 0.138171] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.138381] pci 0000:06:01.0: PME# disabled
[ 0.138650] pci 0000:06:01.1: reg 10 32bit mmio: [0xfd8fe000-0xfd8fefff]
[ 0.138753] pci 0000:06:01.1: supports D1 D2
[ 0.138756] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.138965] pci 0000:06:01.1: PME# disabled
[ 0.139042] pci 0000:06:01.2: reg 10 32bit mmio: [0xfd8fd000-0xfd8fd0ff]
[ 0.139143] pci 0000:06:01.2: supports D1 D2
[ 0.139146] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.139381] pci 0000:06:01.2: PME# disabled
[ 0.139703] pci 0000:05:00.0: bridge io port: [0xa000-0xafff]
[ 0.139711] pci 0000:05:00.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.139723] pci 0000:05:00.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
[ 0.139830] pci 0000:07:00.0: reg 10 32bit mmio: [0xfd6e0000-0xfd6fffff]
[ 0.139845] pci 0000:07:00.0: reg 14 32bit mmio: [0xfd6c0000-0xfd6dffff]
[ 0.139859] pci 0000:07:00.0: reg 18 io port: [0x9c00-0x9c1f]
[ 0.139907] pci 0000:07:00.0: reg 30 32bit mmio: [0xfd6a0000-0xfd6bffff]
[ 0.139972] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.139978] pci 0000:07:00.0: PME# disabled
[ 0.140068] pci 0000:00:14.0: bridge io port: [0x9000-0x9fff]
[ 0.140079] pci 0000:00:14.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
[ 0.140098] pci 0000:00:14.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff]
[ 0.140179] pci_bus 0000:00: on NUMA node 0
[ 0.140187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.318004] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318949] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318951] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318951] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
[ 0.318951] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318951] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318951] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318951] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318951] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15)
[ 0.318951] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.318951] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15)
[ 0.318951] ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15)
[ 0.319220] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.320111] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.321001] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.321946] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.322058] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.322951] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.322951] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.322951] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.322951] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15)
[ 0.323178] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.324068] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.324965] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.325912] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.325951] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.325951] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326061] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.326951] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15)
[ 0.327226] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.328118] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.329010] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.329951] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.330060] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.330774] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.330951] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
[ 0.330951] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.330951] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.330951] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.331265] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.331938] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.331951] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
[ 0.331951] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0
[ 0.331951] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
[ 0.331951] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
[ 0.331951] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
[ 0.332130] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
[ 0.332803] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
[ 0.332951] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.332951] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
[ 0.332951] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
[ 0.333104] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
[ 0.333878] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
[ 0.333984] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.334719] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.335140] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.335879] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.335951] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.335951] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.335951] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.335999] sync cpu 0 get result 1 max_id 1
[ 0.335999] sync cpu 1 get result 1 max_id 1
[ 0.335999] alloc irq_desc for 412 on node 0
[ 0.335999] alloc kstat_irqs on node 0
[ 0.336006] xenbus_probe_backend_init bus registered ok
[ 0.336183] xenbus_probe_frontend_init bus registered ok
[ 0.336197] xen_balloon: Initialising balloon driver with page order 0.
[ 0.337077] SCSI subsystem initialized
[ 0.337202] libata version 3.00 loaded.
[ 0.338042] usbcore: registered new interface driver usbfs
[ 0.338227] usbcore: registered new interface driver hub
[ 0.338240] usbcore: registered new device driver usb
[ 0.339040] PCI: Using ACPI for IRQ routing
[ 0.339413] IO APIC resources couldn't be allocated.
[ 0.356997] cfg80211: Using static regulatory domain info
[ 0.357195] cfg80211: Regulatory domain: US
[ 0.357412] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.357780] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.357951] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.357951] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.357951] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.357951] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.357951] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.357964] cfg80211: Calling CRDA for country: US
[ 0.358182] NetLabel: Initializing
[ 0.358182] NetLabel: domain hash size = 128
[ 0.358365] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.358583] NetLabel: unlabeled traffic allowed by default
[ 0.359961] Switched to high resolution mode on CPU 0
[ 0.360371] Switched to high resolution mode on CPU 1
[ 0.364026] pnp: PnP ACPI init
[ 0.364252] ACPI: bus type pnp registered
[ 0.366259] xen: registering gsi 8 triggering 1 polarity 0
[ 0.366263] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.366469] xen: --> irq=8
[ 0.366472] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.367291] xen: registering gsi 13 triggering 1 polarity 0
[ 0.367294] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.367499] xen: --> irq=13
[ 0.367502] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.368569] xen: registering gsi 6 triggering 1 polarity 0
[ 0.368573] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.368781] xen: --> irq=6
[ 0.368784] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.369981] xen: registering gsi 4 triggering 1 polarity 0
[ 0.369984] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.370189] xen: --> irq=4
[ 0.370192] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
[ 0.379274] pnp: PnP ACPI: found 12 devices
[ 0.379478] ACPI: ACPI bus type pnp unregistered
[ 0.379705] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.379912] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.380119] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.380254] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.380254] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.380254] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.380254] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.380254] system 00:01: iomem range 0xb0000000-0xbfffffff has been reserved
[ 0.380254] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.380254] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.380254] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.380254] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.382228] system 00:0b: iomem range 0xcd600-0xcffff could not be reserved
[ 0.382460] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.382667] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.382875] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.383083] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.383215] system 00:0b: iomem range 0xafee0000-0xafefffff could not be reserved
[ 0.383215] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.383215] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.383215] system 00:0b: iomem range 0x100000-0xafedffff could not be reserved
[ 0.383215] system 00:0b: iomem range 0xafff0000-0xbffeffff could not be reserved
[ 0.383215] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.383215] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.383215] system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.383215] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.383215] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.383215] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.386166] pciback 0000:00:00.0: probing...
[ 0.386178] pciback 0000:00:01.0: probing...
[ 0.386187] pciback 0000:00:01.1: probing...
[ 0.386196] pciback 0000:00:01.2: probing...
[ 0.386205] pciback 0000:00:01.3: probing...
[ 0.386214] pciback 0000:00:01.4: probing...
[ 0.386223] pciback 0000:00:02.0: probing...
[ 0.386232] pciback 0000:00:02.1: probing...
[ 0.386241] pciback 0000:00:04.0: probing...
[ 0.386250] pciback 0000:00:04.1: probing...
[ 0.386259] pciback 0000:00:06.0: probing...
[ 0.386268] pciback 0000:00:07.0: probing...
[ 0.386277] pciback 0000:00:08.0: probing...
[ 0.386286] pciback 0000:00:09.0: probing...
[ 0.386296] pciback 0000:00:0a.0: probing...
[ 0.386305] pciback 0000:00:0b.0: probing...
[ 0.386314] pciback 0000:00:10.0: probing...
[ 0.386323] pciback 0000:00:12.0: probing...
[ 0.386332] pciback 0000:00:13.0: probing...
[ 0.386342] pciback 0000:00:14.0: probing...
[ 0.386351] pciback 0000:00:18.0: probing...
[ 0.386360] pciback 0000:00:18.1: probing...
[ 0.386369] pciback 0000:00:18.2: probing...
[ 0.386378] pciback 0000:00:18.3: probing...
[ 0.386387] pciback 0000:01:08.0: probing...
[ 0.386396] pciback 0000:01:08.1: probing...
[ 0.386404] pciback 0000:01:08.2: probing...
[ 0.386413] pciback 0000:01:0a.0: probing...
[ 0.386422] pciback 0000:02:00.0: probing...
[ 0.386431] pciback 0000:05:00.0: probing...
[ 0.386440] pciback 0000:06:01.0: probing...
[ 0.386449] pciback 0000:06:01.1: probing...
[ 0.386458] pciback 0000:06:01.2: probing...
[ 0.386467] pciback 0000:07:00.0: probing...
[ 0.391243] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.391611] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.391817] pci 0000:00:08.0: IO window: 0xe000-0xefff
[ 0.392002] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff
[ 0.392002] pci 0000:00:08.0: PREFETCH window: 0xfdd00000-0xfddfffff
[ 0.392002] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.392002] pci 0000:00:0b.0: IO window: 0xd000-0xdfff
[ 0.392002] pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff
[ 0.392002] pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff
[ 0.392002] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.392002] pci 0000:00:10.0: IO window: 0xc000-0xcfff
[ 0.392002] pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.392002] pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.392002] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
[ 0.392002] pci 0000:00:12.0: IO window: 0xb000-0xbfff
[ 0.392002] pci 0000:00:12.0: MEM window: 0xfda00000-0xfdafffff
[ 0.392002] pci 0000:00:12.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.392002] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
[ 0.392002] pci 0000:05:00.0: IO window: 0xa000-0xafff
[ 0.392002] pci 0000:05:00.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.392002] pci 0000:05:00.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[ 0.392002] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
[ 0.392002] pci 0000:00:13.0: IO window: 0xa000-0xafff
[ 0.392002] pci 0000:00:13.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.392002] pci 0000:00:13.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[ 0.392002] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07
[ 0.392002] pci 0000:00:14.0: IO window: 0x9000-0x9fff
[ 0.392002] pci 0000:00:14.0: MEM window: 0xfd600000-0xfd6fffff
[ 0.392002] pci 0000:00:14.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff
[ 0.392002] pci 0000:00:08.0: setting latency timer to 64
[ 0.392002] pci 0000:00:0b.0: setting latency timer to 64
[ 0.392002] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
[ 0.392002] xen: registering gsi 16 triggering 0 polarity 1
[ 0.392002] alloc irq_desc for 16 on node 0
[ 0.392002] alloc kstat_irqs on node 0
[ 0.399289] xen: --> irq=16
[ 0.399293] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.399674] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
[ 0.400053] pci 0000:00:10.0: setting latency timer to 64
[ 0.400283] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
[ 0.400283] xen: registering gsi 16 triggering 0 polarity 1
[ 0.400283] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.400283] xen: --> irq=16
[ 0.400283] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.400283] pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
[ 0.400283] pci 0000:00:12.0: setting latency timer to 64
[ 0.400283] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
[ 0.400283] xen: registering gsi 16 triggering 0 polarity 1
[ 0.400283] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.400283] xen: --> irq=16
[ 0.400283] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.400283] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
[ 0.400283] pci 0000:00:13.0: setting latency timer to 64
[ 0.400283] pci 0000:05:00.0: setting latency timer to 64
[ 0.400283] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
[ 0.400283] xen: registering gsi 16 triggering 0 polarity 1
[ 0.400283] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.400283] xen: --> irq=16
[ 0.400283] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.400283] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
[ 0.400283] pci 0000:00:14.0: setting latency timer to 64
[ 0.400283] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.400283] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.400283] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.400283] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.400283] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.400283] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.400283] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.400283] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.400283] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff]
[ 0.400283] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff]
[ 0.400283] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.400283] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.400283] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.400283] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.400283] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.400283] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.400283] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
[ 0.400283] pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.400283] pci_bus 0000:05: resource 2 pref mem [0xfd700000-0xfd7fffff]
[ 0.400283] pci_bus 0000:06: resource 0 io: [0xa000-0xafff]
[ 0.400283] pci_bus 0000:06: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.400283] pci_bus 0000:06: resource 2 pref mem [0xfd700000-0xfd7fffff]
[ 0.400283] pci_bus 0000:07: resource 0 io: [0x9000-0x9fff]
[ 0.400283] pci_bus 0000:07: resource 1 mem: [0xfd600000-0xfd6fffff]
[ 0.400283] pci_bus 0000:07: resource 2 pref mem [0xfd500000-0xfd5fffff]
[ 0.404858] NET: Registered protocol family 2
[ 0.405141] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.405709] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.406084] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.406084] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.406084] TCP reno registered
[ 0.408320] NET: Registered protocol family 1
[ 0.408607] Trying to unpack rootfs image as initramfs...
[ 0.417039] Freeing initrd memory: 5928k freed
[ 0.420817] kvm: no hardware support
[ 0.421043] has_svm: svm not available
[ 0.421244] kvm: no hardware support
[ 0.423709] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.424109] Scanning for low memory corruption every 60 seconds
[ 0.424873] audit: initializing netlink socket (disabled)
[ 0.432552] type=2000 audit(1260780903.209:1): initialized
[ 0.440573] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.445874] VFS: Disk quotas dquot_6.5.2
[ 0.446345] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.448041] msgmni has been set to 1354
[ 0.448468] SELinux: Registering netfilter hooks
[ 0.449280] alg: No test for stdrng (krng)
[ 0.449712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.450089] io scheduler noop registered
[ 0.450289] io scheduler anticipatory registered
[ 0.450517] io scheduler deadline registered
[ 0.450762] io scheduler cfq registered (default)
[ 0.489107] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.489517] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.489931] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.490396] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.490925] pci 0000:01:08.0: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.490928] pci 0000:01:08.0: Performing full reset
[ 0.490951] pci 0000:01:08.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.490954] pci 0000:01:08.1: Performing full reset
[ 0.491007] pci 0000:02:00.0: Boot video device
[ 0.491603] alloc irq_desc for 411 on node 0
[ 0.491606] alloc kstat_irqs on node 0
[ 0.491703] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 0.492318] alloc irq_desc for 410 on node 0
[ 0.492321] alloc kstat_irqs on node 0
[ 0.492410] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 0.492970] alloc irq_desc for 409 on node 0
[ 0.492973] alloc kstat_irqs on node 0
[ 0.493068] pcieport-driver 0000:00:13.0: setting latency timer to 64
[ 0.493623] alloc irq_desc for 408 on node 0
[ 0.493626] alloc kstat_irqs on node 0
[ 0.493714] pcieport-driver 0000:00:14.0: setting latency timer to 64
[ 0.494159] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.494999] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.495372] ACPI: Power Button [PWRF]
[ 0.495733] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.496106] ACPI: Power Button [PWRB]
[ 0.496531] fan PNP0C0B:00: registered as cooling_device0
[ 0.496742] ACPI: Fan [FAN] (on)
[ 0.510129] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-946
[ 0.510580] ACPI: Expecting a [Reference] package element, found type 0
[ 0.510786] ACPI: Invalid passive threshold
[ 0.511622] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.511838] ACPI: Thermal Zone [THRM] (40 C)
[ 0.512334] Event-channel device installed.
[ 0.518539] blktap_device_init: blktap device major 253
[ 0.518762] blktap_ring_init: blktap ring major: 251
[ 0.520235] registering netback
[ 0.520584] pciback: pcistub_init_devices_late
[ 0.526455] alloc irq_desc for 407 on node 0
[ 0.526459] alloc kstat_irqs on node 0
[ 0.527392] hpet_acpi_add: no address or irqs in _CRS
[ 0.527816] Non-volatile memory driver v1.3
[ 0.528116] Linux agpgart interface v0.103
[ 0.528507] [drm] Initialized drm 1.1.0 20060810
[ 0.528785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.533235] brd: module loaded
[ 0.592985] loop: module loaded
[ 0.593475] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.594424] ahci 0000:00:09.0: version 3.0
[ 0.595038] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.595246] xen: registering gsi 23 triggering 0 polarity 1
[ 0.595253] alloc irq_desc for 23 on node 0
[ 0.595256] alloc kstat_irqs on node 0
[ 0.595262] xen: --> irq=23
[ 0.595266] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1
[ 0.595675] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.596004] alloc irq_desc for 406 on node 0
[ 0.596004] alloc kstat_irqs on node 0
[ 0.596219] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 0.596592] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 0.596815] ahci 0000:00:09.0: setting latency timer to 64
[ 0.598059] scsi0 : ahci
[ 0.598552] scsi1 : ahci
[ 0.598941] scsi2 : ahci
[ 0.599361] scsi3 : ahci
[ 0.599770] scsi4 : ahci
[ 0.600219] scsi5 : ahci
[ 0.600831] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 406
[ 0.601229] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 406
[ 0.601557] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 406
[ 0.601557] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 406
[ 0.601557] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 406
[ 0.601557] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 406
[ 0.603451] pata_amd 0000:00:06.0: version 0.4.1
[ 0.603510] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.603642] scsi6 : pata_amd
[ 0.604056] scsi7 : pata_amd
[ 0.605492] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.605701] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.606427] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 0.606671] Copyright (c) 1999-2006 Intel Corporation.
[ 0.606954] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.607160] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.607254] xen: registering gsi 16 triggering 0 polarity 1
[ 0.607254] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.607254] xen: --> irq=16
[ 0.607254] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.607254] e1000e 0000:07:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
[ 0.607254] e1000e 0000:07:00.0: setting latency timer to 64
[ 0.607254] alloc irq_desc for 405 on node 0
[ 0.607254] alloc kstat_irqs on node 0
[ 0.761858] 0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:2c:68:fe
[ 0.762251] 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.762251] 0000:07:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50854-003
[ 0.762929] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.763150] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.763611] sky2 driver version 1.23
[ 0.763910] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.764925] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 0.765145] xen: registering gsi 22 triggering 0 polarity 1
[ 0.765151] alloc irq_desc for 22 on node 0
[ 0.765154] alloc kstat_irqs on node 0
[ 0.765159] xen: --> irq=22
[ 0.765163] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1
[ 0.765308] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 0.765308] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.907021] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.907262] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.908268] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.908490] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.908712] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.060018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.061495] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 1.061705] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.063325] ata1.00: configured for UDMA/133
[ 1.063653] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[ 1.064634] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.064892] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.065436] ata8: port disabled. ignoring.
[ 1.065474] sd 0:0:0:0: [sda] Write Protect is off
[ 1.065688] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.065731] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.066380] sda: sda1 sda2
[ 1.072161] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.271542] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x1374 @ 1, addr 00:1f:c6:8c:5e:b2
[ 1.271917] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 1.272648] console [netcon0] enabled
[ 1.272850] netconsole: network logging started
[ 1.273347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.273583] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 1.274161] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21
[ 1.274331] xen: registering gsi 21 triggering 0 polarity 1
[ 1.274331] alloc irq_desc for 21 on node 0
[ 1.274331] alloc kstat_irqs on node 0
[ 1.274394] xen: --> irq=21
[ 1.274398] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1
[ 1.274780] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 21 (level, low) -> IRQ 21
[ 1.275205] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.275210] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.275453] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 1.275459] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.275569] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.275945] ehci_hcd 0000:00:02.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6
[ 1.275953] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0
[ 1.275957] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 1.276015] ehci_hcd 0000:00:02.1: park 0
[ 1.276021] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.276036] ehci_hcd 0000:00:02.1: debug port 1
[ 1.276243] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.276282] ehci_hcd 0000:00:02.1: supports USB remote wakeup
[ 1.276319] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 1.276526] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.276534] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 1.282017] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.282265] usb usb1: default language 0x0409
[ 1.282277] usb usb1: udev 1, busnum 1, minor = 0
[ 1.282280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.282487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.282855] usb usb1: Product: EHCI Host Controller
[ 1.283057] usb usb1: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 1.283252] usb usb1: SerialNumber: 0000:00:02.1
[ 1.283540] usb usb1: uevent
[ 1.283619] usb usb1: usb_probe_device
[ 1.283623] usb usb1: configuration #1 chosen from 1 choice
[ 1.283836] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.283854] usb 1-0:1.0: uevent
[ 1.283925] hub 1-0:1.0: usb_probe_interface
[ 1.283928] hub 1-0:1.0: usb_probe_interface - got id
[ 1.283931] hub 1-0:1.0: USB hub found
[ 1.284152] hub 1-0:1.0: 6 ports detected
[ 1.284354] hub 1-0:1.0: standalone hub
[ 1.284356] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.284359] hub 1-0:1.0: individual port over-current protection
[ 1.284362] hub 1-0:1.0: power on to power good time: 20ms
[ 1.284376] hub 1-0:1.0: local power source is good
[ 1.284380] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.284416] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.284803] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
[ 1.285224] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
[ 1.285367] xen: registering gsi 20 triggering 0 polarity 1
[ 1.285367] alloc irq_desc for 20 on node 0
[ 1.285367] alloc kstat_irqs on node 0
[ 1.285452] xen: --> irq=20
[ 1.285456] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0 pin 20 triggering 1 polarity 1
[ 1.285835] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
[ 1.286255] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.286260] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.286474] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 1.286584] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 1.286960] ehci_hcd 0000:00:04.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6
[ 1.286969] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0
[ 1.286973] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 1.287019] ehci_hcd 0000:00:04.1: park 0
[ 1.287024] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.287040] ehci_hcd 0000:00:04.1: debug port 1
[ 1.287247] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 1.287251] ehci_hcd 0000:00:04.1: supports USB remote wakeup
[ 1.287278] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
[ 1.287512] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.287520] ehci_hcd 0000:00:04.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 1.293018] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.293251] usb usb2: default language 0x0409
[ 1.293269] usb usb2: udev 1, busnum 2, minor = 128
[ 1.293272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.293479] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.293848] usb usb2: Product: EHCI Host Controller
[ 1.294050] usb usb2: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 1.294254] usb usb2: SerialNumber: 0000:00:04.1
[ 1.294532] usb usb2: uevent
[ 1.294609] usb usb2: usb_probe_device
[ 1.294613] usb usb2: configuration #1 chosen from 1 choice
[ 1.294824] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.294844] usb 2-0:1.0: uevent
[ 1.294914] hub 2-0:1.0: usb_probe_interface
[ 1.294918] hub 2-0:1.0: usb_probe_interface - got id
[ 1.294921] hub 2-0:1.0: USB hub found
[ 1.295140] hub 2-0:1.0: 6 ports detected
[ 1.295342] hub 2-0:1.0: standalone hub
[ 1.295345] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.295347] hub 2-0:1.0: individual port over-current protection
[ 1.295350] hub 2-0:1.0: power on to power good time: 20ms
[ 1.295364] hub 2-0:1.0: local power source is good
[ 1.295368] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.295403] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.295988] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.296193] xen: registering gsi 18 triggering 0 polarity 1
[ 1.296200] alloc irq_desc for 18 on node 0
[ 1.296203] alloc kstat_irqs on node 0
[ 1.296207] xen: --> irq=18
[ 1.296211] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 1.296355] ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 1.296355] ehci_hcd 0000:01:08.2: EHCI Host Controller
[ 1.297225] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 1.297344] ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 3
[ 1.297720] ehci_hcd 0000:01:08.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
[ 1.297725] ehci_hcd 0000:01:08.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024
[ 1.297777] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.297801] ehci_hcd 0000:01:08.2: MWI active
[ 1.297803] ehci_hcd 0000:01:08.2: supports USB remote wakeup
[ 1.297835] ehci_hcd 0000:01:08.2: irq 18, io mem 0xfdeff000
[ 1.298042] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.298049] ehci_hcd 0000:01:08.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 1.304024] ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00
[ 1.304265] usb usb3: default language 0x0409
[ 1.304277] usb usb3: udev 1, busnum 3, minor = 256
[ 1.304280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.304486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.304854] usb usb3: Product: EHCI Host Controller
[ 1.305056] usb usb3: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 1.305253] usb usb3: SerialNumber: 0000:01:08.2
[ 1.312994] usb usb3: uevent
[ 1.313073] usb usb3: usb_probe_device
[ 1.313077] usb usb3: configuration #1 chosen from 1 choice
[ 1.313295] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.313317] usb 3-0:1.0: uevent
[ 1.313389] hub 3-0:1.0: usb_probe_interface
[ 1.313393] hub 3-0:1.0: usb_probe_interface - got id
[ 1.313395] hub 3-0:1.0: USB hub found
[ 1.313616] hub 3-0:1.0: 4 ports detected
[ 1.313845] hub 3-0:1.0: standalone hub
[ 1.313847] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.313850] hub 3-0:1.0: individual port over-current protection
[ 1.313853] hub 3-0:1.0: power on to power good time: 20ms
[ 1.313860] hub 3-0:1.0: local power source is good
[ 1.313864] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.313897] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.314463] ACPI: PCI Interrupt Link [AE3D] enabled at IRQ 16
[ 1.314669] xen: registering gsi 16 triggering 0 polarity 1
[ 1.314672] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.314875] xen: --> irq=16
[ 1.314878] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 1.315254] ehci_hcd 0000:06:01.2: PCI INT C -> Link[AE3D] -> GSI 16 (level, low) -> IRQ 16
[ 1.315254] ehci_hcd 0000:06:01.2: EHCI Host Controller
[ 1.315893] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004'
[ 1.316018] ehci_hcd 0000:06:01.2: new USB bus registered, assigned bus number 4
[ 1.316396] ehci_hcd 0000:06:01.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5
[ 1.316407] ehci_hcd 0000:06:01.2: reset portroute 1 0 1 0 0
[ 1.316412] ehci_hcd 0000:06:01.2: reset hcc_params e806 thresh 0 uframes 256/512/1024 park
[ 1.316497] ehci_hcd 0000:06:01.2: park 0
[ 1.316503] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.316512] ehci_hcd 0000:06:01.2: ...powerup ports...
[ 1.337040] ehci_hcd 0000:06:01.2: MWI active
[ 1.337043] ehci_hcd 0000:06:01.2: supports USB remote wakeup
[ 1.337074] ehci_hcd 0000:06:01.2: irq 16, io mem 0xfd8fd000
[ 1.337308] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.337316] ehci_hcd 0000:06:01.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 1.343017] ehci_hcd 0000:06:01.2: USB 2.0 started, EHCI 1.00
[ 1.343266] usb usb4: default language 0x0409
[ 1.343278] usb usb4: udev 1, busnum 4, minor = 384
[ 1.343281] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.343488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.343856] usb usb4: Product: EHCI Host Controller
[ 1.344059] usb usb4: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 1.344252] usb usb4: SerialNumber: 0000:06:01.2
[ 1.344542] usb usb4: uevent
[ 1.344620] usb usb4: usb_probe_device
[ 1.344624] usb usb4: configuration #1 chosen from 1 choice
[ 1.344837] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.344858] usb 4-0:1.0: uevent
[ 1.344929] hub 4-0:1.0: usb_probe_interface
[ 1.344932] hub 4-0:1.0: usb_probe_interface - got id
[ 1.344935] hub 4-0:1.0: USB hub found
[ 1.345156] hub 4-0:1.0: 5 ports detected
[ 1.345358] hub 4-0:1.0: standalone hub
[ 1.345360] hub 4-0:1.0: individual port power switching
[ 1.345363] hub 4-0:1.0: individual port over-current protection
[ 1.345366] hub 4-0:1.0: power on to power good time: 20ms
[ 1.345380] hub 4-0:1.0: local power source is good
[ 1.345383] hub 4-0:1.0: enabling power on all ports
[ 1.345424] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.345530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.345764] ohci_hcd: block sizes: ed 80 td 96
[ 1.346321] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 1.346527] xen: registering gsi 23 triggering 0 polarity 1
[ 1.346531] xen_allocate_pirq: returning irq 23 for gsi 23
[ 1.346734] xen: --> irq=23
[ 1.346737] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1
[ 1.347145] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 1.347253] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.347253] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.347757] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005'
[ 1.347870] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 5
[ 1.348279] ohci_hcd 0000:00:02.0: created debug files
[ 1.348283] ohci_hcd 0000:00:02.0: supports USB remote wakeup
[ 1.348317] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 1.384037] ehci_hcd 0000:00:02.1: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[ 1.384042] hub 1-0:1.0: port 6: status 0501 change 0001
[ 1.395048] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.401022] ohci_hcd 0000:00:02.0: OHCI controller state
[ 1.401026] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
[ 1.401030] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 1.401034] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
[ 1.401038] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
[ 1.401042] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.401075] ohci_hcd 0000:00:02.0: hcca frame #0003
[ 1.401080] ohci_hcd 0000:00:02.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
[ 1.401084] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.401088] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
[ 1.401092] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.401097] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.401101] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
[ 1.401106] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
[ 1.401110] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
[ 1.401115] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
[ 1.401132] usb usb5: default language 0x0409
[ 1.401143] usb usb5: udev 1, busnum 5, minor = 512
[ 1.401146] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.401252] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.401252] usb usb5: Product: OHCI Host Controller
[ 1.401252] usb usb5: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 1.401252] usb usb5: SerialNumber: 0000:00:02.0
[ 1.402377] usb usb5: uevent
[ 1.402480] usb usb5: usb_probe_device
[ 1.402484] usb usb5: configuration #1 chosen from 1 choice
[ 1.402695] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.402719] usb 5-0:1.0: uevent
[ 1.402791] hub 5-0:1.0: usb_probe_interface
[ 1.402794] hub 5-0:1.0: usb_probe_interface - got id
[ 1.402797] hub 5-0:1.0: USB hub found
[ 1.403018] hub 5-0:1.0: 6 ports detected
[ 1.403219] hub 5-0:1.0: standalone hub
[ 1.403222] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.403225] hub 5-0:1.0: global over-current protection
[ 1.403228] hub 5-0:1.0: power on to power good time: 2ms
[ 1.403235] hub 5-0:1.0: local power source is good
[ 1.403238] hub 5-0:1.0: no over-current condition exists
[ 1.403241] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.403276] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.403864] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22
[ 1.404070] xen: registering gsi 22 triggering 0 polarity 1
[ 1.404073] xen_allocate_pirq: returning irq 22 for gsi 22
[ 1.404253] xen: --> irq=22
[ 1.404253] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1
[ 1.404253] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 22 (level, low) -> IRQ 22
[ 1.404253] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.404253] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.405297] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006'
[ 1.405411] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 6
[ 1.405809] ohci_hcd 0000:00:04.0: created debug files
[ 1.405812] ohci_hcd 0000:00:04.0: supports USB remote wakeup
[ 1.405841] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000
[ 1.413024] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 1.413029] hub 3-0:1.0: port 1: status 0501 change 0001
[ 1.445027] ehci_hcd 0000:06:01.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
[ 1.445032] hub 4-0:1.0: port 3: status 0501 change 0001
[ 1.445042] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
[ 1.445047] hub 4-0:1.0: port 4: status 0501 change 0001
[ 1.459020] ohci_hcd 0000:00:04.0: OHCI controller state
[ 1.459024] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
[ 1.459028] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 1.459032] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
[ 1.459036] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
[ 1.459040] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.459046] ohci_hcd 0000:00:04.0: hcca frame #0003
[ 1.459050] ohci_hcd 0000:00:04.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
[ 1.459054] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.459058] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
[ 1.459063] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.459067] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.459072] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
[ 1.459076] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS
[ 1.459081] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS
[ 1.459085] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS
[ 1.459102] usb usb6: default language 0x0409
[ 1.459113] usb usb6: udev 1, busnum 6, minor = 640
[ 1.459116] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.459252] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.459252] usb usb6: Product: OHCI Host Controller
[ 1.459252] usb usb6: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 1.459252] usb usb6: SerialNumber: 0000:00:04.0
[ 1.460377] usb usb6: uevent
[ 1.460454] usb usb6: usb_probe_device
[ 1.460458] usb usb6: configuration #1 chosen from 1 choice
[ 1.460669] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 1.460716] usb 6-0:1.0: uevent
[ 1.460787] hub 6-0:1.0: usb_probe_interface
[ 1.460790] hub 6-0:1.0: usb_probe_interface - got id
[ 1.460793] hub 6-0:1.0: USB hub found
[ 1.461014] hub 6-0:1.0: 6 ports detected
[ 1.461215] hub 6-0:1.0: standalone hub
[ 1.461218] hub 6-0:1.0: no power switching (usb 1.0)
[ 1.461221] hub 6-0:1.0: global over-current protection
[ 1.461224] hub 6-0:1.0: power on to power good time: 2ms
[ 1.461231] hub 6-0:1.0: local power source is good
[ 1.461234] hub 6-0:1.0: no over-current condition exists
[ 1.461237] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 1.461274] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.461841] ACPI: PCI Interrupt Link [AE3B] enabled at IRQ 16
[ 1.462047] xen: registering gsi 16 triggering 0 polarity 1
[ 1.462050] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.462257] xen: --> irq=16
[ 1.462257] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 1.462257] ohci_hcd 0000:06:01.0: PCI INT A -> Link[AE3B] -> GSI 16 (level, low) -> IRQ 16
[ 1.462257] ohci_hcd 0000:06:01.0: OHCI Host Controller
[ 1.463278] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007'
[ 1.463390] ohci_hcd 0000:06:01.0: new USB bus registered, assigned bus number 7
[ 1.463791] ohci_hcd 0000:06:01.0: enabled NEC chipset lost interrupt quirk
[ 1.463827] ohci_hcd 0000:06:01.0: created debug files
[ 1.463830] ohci_hcd 0000:06:01.0: supports USB remote wakeup
[ 1.463840] ohci_hcd 0000:06:01.0: irq 16, io mem 0xfd8ff000
[ 1.484032] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 1.484045] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 1.484055] ehci_hcd 0000:00:02.1: port 6 low speed --> companion
[ 1.503032] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00010301 CSC LSDA PPS CCS
[ 1.503037] hub 5-0:1.0: port 6: status 0301 change 0001
[ 1.536018] ehci_hcd 0000:00:02.1: GetStatus port 6 status 003402 POWER OWNER sig=k CSC
[ 1.536038] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 1.536045] hub 3-0:1.0: state 7 ports 4 chg 0002 evt 0000
[ 1.536052] hub 3-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.545033] ohci_hcd 0000:06:01.0: OHCI controller state
[ 1.545038] ohci_hcd 0000:06:01.0: OHCI 1.0, NO legacy support registers
[ 1.545043] ohci_hcd 0000:06:01.0: control 0x283 RWC HCFS=operational CBSR=3
[ 1.545048] ohci_hcd 0000:06:01.0: cmdstatus 0x00000 SOC=0
[ 1.545053] ohci_hcd 0000:06:01.0: intrstatus 0x00000004 SF
[ 1.545058] ohci_hcd 0000:06:01.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.545069] ohci_hcd 0000:06:01.0: hcca frame #001f
[ 1.545074] ohci_hcd 0000:06:01.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3)
[ 1.545078] ohci_hcd 0000:06:01.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.545083] ohci_hcd 0000:06:01.0: roothub.status 00008000 DRWE
[ 1.545088] ohci_hcd 0000:06:01.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.545093] ohci_hcd 0000:06:01.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.545099] ohci_hcd 0000:06:01.0: roothub.portstatus [2] 0x00000100 PPS
[ 1.545115] usb usb7: default language 0x0409
[ 1.545127] usb usb7: udev 1, busnum 7, minor = 768
[ 1.545130] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.545252] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.545252] usb usb7: Product: OHCI Host Controller
[ 1.545252] usb usb7: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 1.545252] usb usb7: SerialNumber: 0000:06:01.0
[ 1.546402] usb usb7: uevent
[ 1.546478] usb usb7: usb_probe_device
[ 1.546481] usb usb7: configuration #1 chosen from 1 choice
[ 1.546720] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 1.546739] usb 7-0:1.0: uevent
[ 1.546810] hub 7-0:1.0: usb_probe_interface
[ 1.546813] hub 7-0:1.0: usb_probe_interface - got id
[ 1.546816] hub 7-0:1.0: USB hub found
[ 1.547040] hub 7-0:1.0: 3 ports detected
[ 1.547240] hub 7-0:1.0: standalone hub
[ 1.547243] hub 7-0:1.0: no power switching (usb 1.0)
[ 1.547246] hub 7-0:1.0: global over-current protection
[ 1.547249] hub 7-0:1.0: power on to power good time: 30ms
[ 1.547265] hub 7-0:1.0: local power source is good
[ 1.547268] hub 7-0:1.0: no over-current condition exists
[ 1.547271] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 1.547294] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.547856] ACPI: PCI Interrupt Link [AE3C] enabled at IRQ 16
[ 1.548084] xen: registering gsi 16 triggering 0 polarity 1
[ 1.548087] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.548255] xen: --> irq=16
[ 1.548255] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 1.548255] ohci_hcd 0000:06:01.1: PCI INT B -> Link[AE3C] -> GSI 16 (level, low) -> IRQ 16
[ 1.548255] ohci_hcd 0000:06:01.1: OHCI Host Controller
[ 1.549292] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008'
[ 1.549405] ohci_hcd 0000:06:01.1: new USB bus registered, assigned bus number 8
[ 1.549806] ohci_hcd 0000:06:01.1: enabled NEC chipset lost interrupt quirk
[ 1.549836] ohci_hcd 0000:06:01.1: created debug files
[ 1.549839] ohci_hcd 0000:06:01.1: supports USB remote wakeup
[ 1.549848] ohci_hcd 0000:06:01.1: irq 16, io mem 0xfd8fe000
[ 1.586334] ehci_hcd 0000:01:08.2: port 1 high speed
[ 1.586339] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 1.631030] ohci_hcd 0000:06:01.1: OHCI controller state
[ 1.631035] ohci_hcd 0000:06:01.1: OHCI 1.0, NO legacy support registers
[ 1.631041] ohci_hcd 0000:06:01.1: control 0x283 RWC HCFS=operational CBSR=3
[ 1.631045] ohci_hcd 0000:06:01.1: cmdstatus 0x00000 SOC=0
[ 1.631050] ohci_hcd 0000:06:01.1: intrstatus 0x00000004 SF
[ 1.631056] ohci_hcd 0000:06:01.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.631067] ohci_hcd 0000:06:01.1: hcca frame #001f
[ 1.631072] ohci_hcd 0000:06:01.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2)
[ 1.631076] ohci_hcd 0000:06:01.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.631081] ohci_hcd 0000:06:01.1: roothub.status 00008000 DRWE
[ 1.631086] ohci_hcd 0000:06:01.1: roothub.portstatus [0] 0x00000100 PPS
[ 1.631091] ohci_hcd 0000:06:01.1: roothub.portstatus [1] 0x00000100 PPS
[ 1.631127] usb usb8: default language 0x0409
[ 1.631140] usb usb8: udev 1, busnum 8, minor = 896
[ 1.631143] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.631385] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.631753] usb usb8: Product: OHCI Host Controller
[ 1.631955] usb usb8: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 1.632104] usb usb8: SerialNumber: 0000:06:01.1
[ 1.632430] usb usb8: uevent
[ 1.632529] usb usb8: usb_probe_device
[ 1.632533] usb usb8: configuration #1 chosen from 1 choice
[ 1.632770] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 1.632793] usb 8-0:1.0: uevent
[ 1.632873] hub 8-0:1.0: usb_probe_interface
[ 1.632876] hub 8-0:1.0: usb_probe_interface - got id
[ 1.632879] hub 8-0:1.0: USB hub found
[ 1.633125] hub 8-0:1.0: 2 ports detected
[ 1.633327] hub 8-0:1.0: standalone hub
[ 1.633329] hub 8-0:1.0: no power switching (usb 1.0)
[ 1.633332] hub 8-0:1.0: global over-current protection
[ 1.633335] hub 8-0:1.0: power on to power good time: 30ms
[ 1.633344] hub 8-0:1.0: local power source is good
[ 1.633347] hub 8-0:1.0: no over-current condition exists
[ 1.633350] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 1.633374] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.633501] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.634435] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.634643] xen: registering gsi 16 triggering 0 polarity 1
[ 1.634646] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.634850] xen: --> irq=16
[ 1.634854] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 1.635004] uhci_hcd 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 1.635004] uhci_hcd 0000:01:08.0: UHCI Host Controller
[ 1.635871] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '009'
[ 1.635988] uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 9
[ 1.636373] uhci_hcd 0000:01:08.0: detected 2 ports
[ 1.636580] uhci_hcd 0000:01:08.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.636583] uhci_hcd 0000:01:08.0: Performing full reset
[ 1.636603] uhci_hcd 0000:01:08.0: supports USB remote wakeup
[ 1.636614] uhci_hcd 0000:01:08.0: irq 16, io base 0x0000ec00
[ 1.636925] usb usb9: default language 0x0409
[ 1.636937] usb usb9: udev 1, busnum 9, minor = 1024
[ 1.636940] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.637149] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.637365] usb usb9: Product: UHCI Host Controller
[ 1.637365] usb usb9: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 1.637365] usb usb9: SerialNumber: 0000:01:08.0
[ 1.638149] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 1.638436] usb usb9: uevent
[ 1.638517] usb usb9: usb_probe_device
[ 1.638521] usb usb9: configuration #1 chosen from 1 choice
[ 1.638762] usb usb9: adding 9-0:1.0 (config #1, interface 0)
[ 1.638783] usb 9-0:1.0: uevent
[ 1.638858] hub 9-0:1.0: usb_probe_interface
[ 1.638861] hub 9-0:1.0: usb_probe_interface - got id
[ 1.638864] hub 9-0:1.0: USB hub found
[ 1.639091] hub 9-0:1.0: 2 ports detected
[ 1.639292] hub 9-0:1.0: standalone hub
[ 1.639294] hub 9-0:1.0: no power switching (usb 1.0)
[ 1.639297] hub 9-0:1.0: individual port over-current protection
[ 1.639300] hub 9-0:1.0: power on to power good time: 2ms
[ 1.639307] hub 9-0:1.0: local power source is good
[ 1.639311] hub 9-0:1.0: trying to enable port power on non-switchable hub
[ 1.639336] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.639905] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.640083] xen: registering gsi 17 triggering 0 polarity 1
[ 1.640083] alloc irq_desc for 17 on node 0
[ 1.640083] alloc kstat_irqs on node 0
[ 1.640135] xen: --> irq=17
[ 1.640138] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1
[ 1.640518] uhci_hcd 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 1.640898] uhci_hcd 0000:01:08.1: UHCI Host Controller
[ 1.641141] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '010'
[ 1.641253] uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 10
[ 1.641634] uhci_hcd 0000:01:08.1: detected 2 ports
[ 1.641840] uhci_hcd 0000:01:08.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.641843] uhci_hcd 0000:01:08.1: Performing full reset
[ 1.641863] uhci_hcd 0000:01:08.1: supports USB remote wakeup
[ 1.641897] uhci_hcd 0000:01:08.1: irq 17, io base 0x0000e800
[ 1.642186] usb usb10: default language 0x0409
[ 1.642198] usb usb10: udev 1, busnum 10, minor = 1152
[ 1.642201] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.642434] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.642801] usb usb10: Product: UHCI Host Controller
[ 1.643004] usb usb10: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 1.643154] usb usb10: SerialNumber: 0000:01:08.1
[ 1.643458] usb usb10: uevent
[ 1.643537] usb usb10: usb_probe_device
[ 1.643540] usb usb10: configuration #1 chosen from 1 choice
[ 1.643764] usb usb10: adding 10-0:1.0 (config #1, interface 0)
[ 1.643783] usb 10-0:1.0: uevent
[ 1.643855] hub 10-0:1.0: usb_probe_interface
[ 1.643858] hub 10-0:1.0: usb_probe_interface - got id
[ 1.643861] hub 10-0:1.0: USB hub found
[ 1.644087] hub 10-0:1.0: 2 ports detected
[ 1.644288] hub 10-0:1.0: standalone hub
[ 1.644291] hub 10-0:1.0: no power switching (usb 1.0)
[ 1.644293] hub 10-0:1.0: individual port over-current protection
[ 1.644297] hub 10-0:1.0: power on to power good time: 2ms
[ 1.644304] hub 10-0:1.0: local power source is good
[ 1.644307] hub 10-0:1.0: trying to enable port power on non-switchable hub
[ 1.644329] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 1.644548] usbcore: registered new interface driver usblp
[ 1.644755] Initializing USB Mass Storage driver...
[ 1.645074] usbcore: registered new interface driver usb-storage
[ 1.645307] USB Mass Storage support registered.
[ 1.645618] usbcore: registered new interface driver libusual
[ 1.646135] PNP: No PS/2 controller found. Probing ports directly.
[ 1.646932] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.647143] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.647570] mice: PS/2 mouse device common for all mice
[ 1.648347] rtc_cmos 00:05: RTC can wake from S4
[ 1.648662] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.648930] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.649812] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.650454] cpuidle: using governor ladder
[ 1.650676] cpuidle: using governor menu
[ 1.653152] usbcore: registered new interface driver hiddev
[ 1.653465] usbcore: registered new interface driver usbhid
[ 1.653671] usbhid: v2.6:USB HID core driver
[ 1.654271] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 1.659315] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 1.659527] xen: registering gsi 21 triggering 0 polarity 1
[ 1.659531] xen_allocate_pirq: returning irq 21 for gsi 21
[ 1.659734] xen: --> irq=21
[ 1.659738] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1
[ 1.660008] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 1.660008] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 1.689345] ehci_hcd 0000:01:08.2: port 1 high speed
[ 1.689351] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 1.739022] uhci_hcd 0000:01:08.0: port 1 portsc 008a,00
[ 1.739044] uhci_hcd 0000:01:08.0: port 2 portsc 008a,00
[ 1.744023] uhci_hcd 0000:01:08.1: port 1 portsc 008a,00
[ 1.744043] uhci_hcd 0000:01:08.1: port 2 portsc 008a,00
[ 1.752989] usb 3-1: default language 0x0409
[ 1.753368] usb 3-1: udev 2, busnum 3, minor = 257
[ 1.753371] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608
[ 1.753580] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.753787] usb 3-1: Product: USB2.0 Hub
[ 1.754063] usb 3-1: uevent
[ 1.754147] usb 3-1: usb_probe_device
[ 1.754151] usb 3-1: configuration #1 chosen from 1 choice
[ 1.754622] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 1.754642] usb 3-1:1.0: uevent
[ 1.754736] hub 3-1:1.0: usb_probe_interface
[ 1.754739] hub 3-1:1.0: usb_probe_interface - got id
[ 1.754742] hub 3-1:1.0: USB hub found
[ 1.755245] hub 3-1:1.0: 4 ports detected
[ 1.755446] hub 3-1:1.0: standalone hub
[ 1.755449] hub 3-1:1.0: ganged power switching
[ 1.755451] hub 3-1:1.0: global over-current protection
[ 1.755454] hub 3-1:1.0: Single TT
[ 1.755457] hub 3-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 1.755460] hub 3-1:1.0: Port indicators are supported
[ 1.755463] hub 3-1:1.0: power on to power good time: 100ms
[ 1.755864] hub 3-1:1.0: local power source is good
[ 1.755867] hub 3-1:1.0: no over-current condition exists
[ 1.755870] hub 3-1:1.0: enabling power on all ports
[ 1.757008] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 1.757040] hub 4-0:1.0: state 7 ports 5 chg 0018 evt 0000
[ 1.757049] hub 4-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 1.757059] ehci_hcd 0000:06:01.2: port 3 low speed --> companion
[ 1.807020] ehci_hcd 0000:06:01.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC
[ 1.807047] hub 4-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 1.857252] hub 3-1:1.0: port 4: status 0101 change 0001
[ 1.858174] ehci_hcd 0000:06:01.2: port 4 high speed
[ 1.858178] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 1.909021] usb 4-4: new high speed USB device using ehci_hcd and address 3
[ 1.957019] usb 3-1: link qh256-0001/ffff88002dd17180 start 1 [1/0 us]
[ 1.961178] ehci_hcd 0000:06:01.2: port 4 high speed
[ 1.961182] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 2.024458] usb 4-4: udev 3, busnum 4, minor = 386
[ 2.024462] usb 4-4: New USB device found, idVendor=eb1a, idProduct=2860
[ 2.024674] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.024930] usb 4-4: uevent
[ 2.025025] usb 4-4: usb_probe_device
[ 2.025029] usb 4-4: configuration #1 chosen from 1 choice
[ 2.032822] usb 4-4: adding 4-4:1.0 (config #1, interface 0)
[ 2.032842] usb 4-4:1.0: uevent
[ 2.032961] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 2.032988] hub 6-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 2.032995] hub 5-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 2.033012] hub 5-0:1.0: port 6, status 0301, change 0000, 1.5 Mb/s
[ 2.041260] ALSA device list:
[ 2.041461] #0: HDA NVidia at 0xfe020000 irq 21
[ 2.041724] Netfilter messages via NETLINK v0.30.
[ 2.041946] nf_conntrack version 0.5.0 (6144 buckets, 24576 max)
[ 2.042502] ctnetlink v0.93: registering with nfnetlink.
[ 2.043317] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.043548] TCP cubic registered
[ 2.043747] Initializing XFRM netlink socket
[ 2.044376] NET: Registered protocol family 10
[ 2.046118] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.046385] IPv6 over IPv4 tunneling driver
[ 2.047377] NET: Registered protocol family 17
[ 2.047894] RPC: Registered udp transport module.
[ 2.048099] RPC: Registered tcp transport module.
[ 2.048666] PM: Resume from disk failed.
[ 2.048690] registered taskstats version 1
[ 2.049105] Magic number: 5:825:927
[ 2.049388] block loop87: hash matches
[ 2.049806] Freeing unused kernel memory: 528k freed
[ 2.050005] Write protecting the kernel read-only data: 8312k
[ 2.140035] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
[ 2.191041] usb 5-6: new low speed USB device using ohci_hcd and address 2
[ 2.299043] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
[ 2.317110] usb usb5: uevent
[ 2.317143] usb 5-0:1.0: uevent
[ 2.317236] usb usb1: uevent
[ 2.317276] usb 1-0:1.0: uevent
[ 2.317380] usb usb6: uevent
[ 2.317412] usb 6-0:1.0: uevent
[ 2.317501] usb usb2: uevent
[ 2.317537] usb 2-0:1.0: uevent
[ 2.318248] usb usb9: uevent
[ 2.318280] usb 9-0:1.0: uevent
[ 2.318400] usb usb10: uevent
[ 2.318432] usb 10-0:1.0: uevent
[ 2.318525] usb usb3: uevent
[ 2.318557] usb 3-0:1.0: uevent
[ 2.318592] usb 3-1: uevent
[ 2.318625] usb 3-1:1.0: uevent
[ 2.319819] usb usb7: uevent
[ 2.319852] usb 7-0:1.0: uevent
[ 2.319946] usb usb8: uevent
[ 2.319980] usb 8-0:1.0: uevent
[ 2.321104] usb usb4: uevent
[ 2.321138] usb 4-0:1.0: uevent
[ 2.321176] usb 4-4: uevent
[ 2.321209] usb 4-4:1.0: uevent
[ 2.373071] usb 5-6: skipped 1 descriptor after interface
[ 2.373077] usb 5-6: skipped 1 descriptor after interface
[ 2.376058] usb 5-6: default language 0x0409
[ 2.382057] usb 5-6: udev 2, busnum 5, minor = 513
[ 2.382062] usb 5-6: New USB device found, idVendor=046d, idProduct=c517
[ 2.382284] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.382500] usb 5-6: Product: USB Receiver
[ 2.382699] usb 5-6: Manufacturer: Logitech
[ 2.383037] usb 5-6: uevent
[ 2.383056] usb 5-6: usb_probe_device
[ 2.383061] usb 5-6: configuration #1 chosen from 1 choice
[ 2.385064] usb 5-6: adding 5-6:1.0 (config #1, interface 0)
[ 2.385107] usb 5-6:1.0: uevent
[ 2.385135] usbhid 5-6:1.0: usb_probe_interface
[ 2.385138] usbhid 5-6:1.0: usb_probe_interface - got id
[ 2.392402] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.0/input/input3
[ 2.392891] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-6/input0
[ 2.393308] usb 5-6: adding 5-6:1.1 (config #1, interface 1)
[ 2.393329] usb 5-6:1.1: uevent
[ 2.393350] usbhid 5-6:1.1: usb_probe_interface
[ 2.393353] usbhid 5-6:1.1: usb_probe_interface - got id
[ 2.402039] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.403220] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.1/input/input4
[ 2.403662] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96
[ 2.403734] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6/input1
[ 2.404142] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 2.404172] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004
[ 2.404182] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 2.404190] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 2.508038] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 2.614049] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 2.665158] usb 7-2: new low speed USB device using ohci_hcd and address 2
[ 2.704277] ohci_hcd 0000:00:04.0: auto-stop root hub
[ 2.705026] ohci_hcd 0000:06:01.1: auto-stop root hub
[ 2.773162] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 2.839766] ohci_hcd 0000:06:01.0: urb ffff88002dd9dc00 path 2 ep0in 5ed60000 cc 5 --> status -62
[ 2.849825] usb 7-2: skipped 1 descriptor after interface
[ 2.852801] usb 7-2: default language 0x0409
[ 2.855764] ohci_hcd 0000:06:01.0: urb ffff88002dde8240 path 2 ep0in 5ed60000 cc 5 --> status -62
[ 2.866909] usb 7-2: udev 2, busnum 7, minor = 769
[ 2.866913] usb 7-2: New USB device found, idVendor=10cf, idProduct=5500
[ 2.867009] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.867009] usb 7-2: Product: USB K8055
[ 2.867009] usb 7-2: Manufacturer: Velleman
[ 2.867898] usb 7-2: uevent
[ 2.867919] usb 7-2: usb_probe_device
[ 2.867923] usb 7-2: configuration #1 chosen from 1 choice
[ 2.872920] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
[ 2.872962] usb 7-2:1.0: uevent
[ 2.872993] usbhid 7-2:1.0: usb_probe_interface
[ 2.872996] usbhid 7-2:1.0: usb_probe_interface - got id
[ 2.882795] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96
[ 2.882901] generic-usb 0003:10CF:5500.0003: hiddev97,hidraw2: USB HID v1.00 Device [Velleman USB K8055] on usb-0000:06:01.0-2/input0
[ 2.883355] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 2.883385] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.883392] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0008
[ 2.883407] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.883412] hub 10-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.883417] hub 3-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 2.883807] hub 3-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 2.948536] usb 3-1.4: new high speed USB device using ehci_hcd and address 3
[ 2.955036] usb usb9: suspend_rh (auto-stop)
[ 2.955066] usb usb10: suspend_rh (auto-stop)
[ 2.960408] hub 3-1:1.0: port 4 not reset yet, waiting 10ms
[ 3.037408] usb 3-1.4: skipped 4 descriptors after interface
[ 3.037413] usb 3-1.4: skipped 2 descriptors after interface
[ 3.037417] usb 3-1.4: skipped 1 descriptor after endpoint
[ 3.037421] usb 3-1.4: skipped 2 descriptors after interface
[ 3.037424] usb 3-1.4: skipped 1 descriptor after endpoint
[ 3.037427] usb 3-1.4: skipped 2 descriptors after interface
[ 3.037431] usb 3-1.4: skipped 1 descriptor after endpoint
[ 3.037434] usb 3-1.4: skipped 2 descriptors after interface
[ 3.037437] usb 3-1.4: skipped 1 descriptor after endpoint
[ 3.037440] usb 3-1.4: skipped 2 descriptors after interface
[ 3.037443] usb 3-1.4: skipped 1 descriptor after endpoint
[ 3.037516] usb 3-1.4: default language 0x0409
[ 3.044296] usb 3-1.4: udev 3, busnum 3, minor = 258
[ 3.044301] usb 3-1.4: New USB device found, idVendor=2304, idProduct=0208
[ 3.044531] usb 3-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.044898] usb 3-1.4: Product: PCTV USB2 PAL
[ 3.045005] usb 3-1.4: Manufacturer: Pinnacle Systems GmbH
[ 3.045409] usb 3-1.4: uevent
[ 3.045428] usb 3-1.4: usb_probe_device
[ 3.045432] usb 3-1.4: configuration #1 chosen from 1 choice
[ 3.045790] usb 3-1.4: adding 3-1.4:1.0 (config #1, interface 0)
[ 3.045813] usb 3-1.4:1.0: uevent
[ 3.045871] usb 3-1.4: adding 3-1.4:1.1 (config #1, interface 1)
[ 3.045891] usb 3-1.4:1.1: uevent
[ 3.045908] usb 3-1.4: adding 3-1.4:1.2 (config #1, interface 2)
[ 3.045929] usb 3-1.4:1.2: uevent
[ 3.045948] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 3.045978] hub 5-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 3.045988] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004
[ 3.705353] hub 2-0:1.0: hub_suspend
[ 3.705364] usb usb2: bus auto-suspend
[ 3.705367] ehci_hcd 0000:00:04.1: suspend root hub
[ 3.705385] hub 1-0:1.0: hub_suspend
[ 3.705389] usb usb1: bus auto-suspend
[ 3.705392] ehci_hcd 0000:00:02.1: suspend root hub
[ 4.333079] PM: Starting manual resume from disk
[ 4.333258] PM: Resume from partition 252:1
[ 4.333258] PM: Checking hibernation image.
[ 4.349033] PM: Resume from disk failed.
[ 4.382383] kjournald starting. Commit interval 5 seconds
[ 4.382397] EXT3-fs: mounted filesystem with journal data mode.
[ 4.704025] hub 6-0:1.0: hub_suspend
[ 4.704035] usb usb6: bus auto-suspend
[ 4.704040] ohci_hcd 0000:00:04.0: suspend root hub
[ 5.369414] udevd version 125 started
[ 5.564743] usb usb5: uevent
[ 5.564778] usb 5-0:1.0: uevent
[ 5.564815] usb 5-6: uevent
[ 5.564847] usb 5-6:1.0: uevent
[ 5.565046] usb 5-6:1.1: uevent
[ 5.565360] usb usb1: uevent
[ 5.565391] usb 1-0:1.0: uevent
[ 5.565482] usb usb6: uevent
[ 5.565519] usb 6-0:1.0: uevent
[ 5.565611] usb usb2: uevent
[ 5.565652] usb 2-0:1.0: uevent
[ 5.566434] usb usb9: uevent
[ 5.566469] usb 9-0:1.0: uevent
[ 5.566563] usb usb10: uevent
[ 5.566596] usb 10-0:1.0: uevent
[ 5.566688] usb usb3: uevent
[ 5.566720] usb 3-0:1.0: uevent
[ 5.566755] usb 3-1: uevent
[ 5.566792] usb 3-1.4: uevent
[ 5.566825] usb 3-1.4:1.0: uevent
[ 5.566860] usb 3-1.4:1.1: uevent
[ 5.566895] usb 3-1.4:1.2: uevent
[ 5.566929] usb 3-1:1.0: uevent
[ 5.569551] usb usb7: uevent
[ 5.569587] usb 7-0:1.0: uevent
[ 5.569625] usb 7-2: uevent
[ 5.569662] usb 7-2:1.0: uevent
[ 5.569858] usb usb8: uevent
[ 5.569891] usb 8-0:1.0: uevent
[ 5.569985] usb usb4: uevent
[ 5.570031] usb 4-0:1.0: uevent
[ 5.570068] usb 4-4: uevent
[ 5.570102] usb 4-4:1.0: uevent
[ 5.704026] hub 8-0:1.0: hub_suspend
[ 5.704036] usb usb8: bus auto-suspend
[ 5.704041] ohci_hcd 0000:06:01.1: suspend root hub
[ 5.704049] hub 9-0:1.0: hub_suspend
[ 5.704053] usb usb9: bus auto-suspend
[ 5.704057] usb usb9: suspend_rh
[ 5.704078] hub 10-0:1.0: hub_suspend
[ 5.704083] usb usb10: bus auto-suspend
[ 5.704085] usb usb10: suspend_rh
[ 6.540772] ata1.00: configured for UDMA/133
[ 6.541164] ata1: EH complete
[ 8.481173] ata1.00: configured for UDMA/133
[ 8.481230] ata1: EH complete
[ 8.914259] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 8.919401] EXT3 FS on dm-0, internal journal
[ 12.994033] kjournald starting. Commit interval 5 seconds
[ 13.004472] EXT3 FS on sda1, internal journal
[ 13.004747] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.086281] kjournald starting. Commit interval 5 seconds
[ 13.094529] EXT3 FS on dm-2, internal journal
[ 13.094803] EXT3-fs: recovery complete.
[ 13.102882] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.129511] kjournald starting. Commit interval 5 seconds
[ 13.135720] EXT3 FS on dm-3, internal journal
[ 13.135992] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.165072] kjournald starting. Commit interval 5 seconds
[ 13.176062] EXT3 FS on dm-4, internal journal
[ 13.176334] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.205679] kjournald starting. Commit interval 5 seconds
[ 13.213025] EXT3 FS on dm-5, internal journal
[ 13.213296] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.234442] kjournald starting. Commit interval 5 seconds
[ 13.245707] EXT3 FS on dm-6, internal journal
[ 13.245979] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.281015] kjournald starting. Commit interval 5 seconds
[ 13.287353] EXT3 FS on dm-9, internal journal
[ 13.287626] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.309909] kjournald starting. Commit interval 5 seconds
[ 13.322647] EXT3 FS on dm-7, internal journal
[ 13.322919] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.353359] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k
[ 14.762066] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 14.763840] alloc irq_desc for 404 on node 0
[ 14.763845] alloc kstat_irqs on node 0
[ 16.345999] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 16.346004] 0000:07:00.0: eth1: 10/100 speed: disabling TSO
[ 16.346868] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 17.343577] eth1: IPv6 duplicate address detected!
[ 22.863801] alloc irq_desc for 403 on node 0
[ 22.863805] alloc kstat_irqs on node 0
[ 22.863868] xenbus_probe wake_waiting
[ 22.863872] alloc irq_desc for 402 on node 0
[ 22.863875] alloc kstat_irqs on node 0
[ 22.870024] xenbus_probe wake_waiting
[ 22.871310] XENBUS: Unable to read cpu state
[ 22.872098] XENBUS: Unable to read cpu state
[ 22.872792] xenbus_probe_devices backend
[ 22.873178] xenbus_probe_devices failed xenbus_directory
[ 22.873385] backend_probe_and_watch devices probed ok
[ 22.873722] backend_probe_and_watch watch add ok ok
[ 22.873926] backend_probe_and_watch all done
[ 22.874005] xenbus_probe_devices device
[ 22.877164] xenbus_probe_devices failed xenbus_directory
[ 22.877396] frontend_probe_and_watch devices probed ok
[ 22.877759] frontend_probe_and_watch watch add ok ok
[ 22.877962] frontend_probe_and_watch all done
[ 24.481261] vpn_bridge: no IPv6 routers present
[ 24.967013] xen_bridge: no IPv6 routers present
[ 25.044009] eth0: no IPv6 routers present
[ 36.895962] device vif5.0 entered promiscuous mode
[ 36.902982] xen_bridge: port 1(vif5.0) entering learning state
[ 36.919544] xen_bridge: port 1(vif5.0) entering disabled state
[ 36.922248] xen_bridge: port 1(vif5.0) entering disabled state
[ 40.774989] device vif6.0 entered promiscuous mode
[ 40.822470] xen_bridge: port 1(vif6.0) entering learning state
[ 41.123830] xen_bridge: port 1(vif6.0) entering disabled state
[ 41.126539] xen_bridge: port 1(vif6.0) entering disabled state
[ 43.013173] alloc irq_desc for 401 on node 0
[ 43.013178] alloc kstat_irqs on node 0
[ 43.332259] alloc irq_desc for 400 on node 0
[ 43.332264] alloc kstat_irqs on node 0
[ 43.500504] device vif7.0 entered promiscuous mode
[ 43.512551] xen_bridge: port 1(vif7.0) entering learning state
[ 53.738269] vif7.0: no IPv6 routers present
[ 56.208373] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 56.208649] alloc irq_desc for 399 on node 0
[ 56.208653] alloc kstat_irqs on node 0
[ 56.216348] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 56.216587] alloc irq_desc for 398 on node 0
[ 56.216590] alloc kstat_irqs on node 0
[ 58.541228] xen_bridge: port 1(vif7.0) entering forwarding state
[ 62.835136] frontend_changed: backend/vbd/7/2049: prepare for reconnect
[ 62.838801] frontend_changed: backend/vbd/7/2050: prepare for reconnect
[ 63.060353] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 63.066629] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 63.066878] alloc irq_desc for 397 on node 0
[ 63.066881] alloc kstat_irqs on node 0
[ 63.105805] alloc irq_desc for 396 on node 0
[ 63.105810] alloc kstat_irqs on node 0
[ 63.778165] alloc irq_desc for 395 on node 0
[ 63.778170] alloc kstat_irqs on node 0
[ 63.910721] device vif8.0 entered promiscuous mode
[ 63.922989] xen_bridge: port 2(vif8.0) entering learning state
[ 69.228673] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 69.228938] alloc irq_desc for 394 on node 0
[ 69.228941] alloc kstat_irqs on node 0
[ 69.242262] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 69.242524] alloc irq_desc for 393 on node 0
[ 69.242527] alloc kstat_irqs on node 0
[ 74.870289] vif8.0: no IPv6 routers present
[ 75.810172] frontend_changed: backend/vbd/8/2049: prepare for reconnect
[ 75.813445] frontend_changed: backend/vbd/8/2050: prepare for reconnect
[ 76.140320] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 76.140583] alloc irq_desc for 392 on node 0
[ 76.140587] alloc kstat_irqs on node 0
[ 76.225174] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 76.225435] alloc irq_desc for 391 on node 0
[ 76.225439] alloc kstat_irqs on node 0
[ 76.332710] alloc irq_desc for 390 on node 0
[ 76.332714] alloc kstat_irqs on node 0
[ 76.386096] device vif9.0 entered promiscuous mode
[ 76.414833] xen_bridge: port 3(vif9.0) entering learning state
[ 78.923358] xen_bridge: port 2(vif8.0) entering forwarding state
[ 81.135043] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 81.135294] alloc irq_desc for 389 on node 0
[ 81.135297] alloc kstat_irqs on node 0
[ 81.144565] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 81.144813] alloc irq_desc for 388 on node 0
[ 81.144816] alloc kstat_irqs on node 0
[ 87.126401] vif9.0: no IPv6 routers present
[ 88.017715] frontend_changed: backend/vbd/9/2049: prepare for reconnect
[ 88.021809] frontend_changed: backend/vbd/9/2050: prepare for reconnect
[ 88.236234] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 88.242402] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 88.242659] alloc irq_desc for 387 on node 0
[ 88.242663] alloc kstat_irqs on node 0
[ 88.318367] alloc irq_desc for 386 on node 0
[ 88.318372] alloc kstat_irqs on node 0
[ 88.890996] alloc irq_desc for 385 on node 0
[ 88.891006] alloc kstat_irqs on node 0
[ 89.110147] device vif10.0 entered promiscuous mode
[ 89.124794] xen_bridge: port 4(vif10.0) entering learning state
[ 91.415274] xen_bridge: port 3(vif9.0) entering forwarding state
[ 94.127208] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 94.127461] alloc irq_desc for 384 on node 0
[ 94.127465] alloc kstat_irqs on node 0
[ 94.137721] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 94.138022] alloc irq_desc for 383 on node 0
[ 94.138027] alloc kstat_irqs on node 0
[ 99.279014] vif10.0: no IPv6 routers present
[ 100.547294] alloc irq_desc for 382 on node 0
[ 100.547299] alloc kstat_irqs on node 0
[ 100.671665] frontend_changed: backend/vbd/10/2049: prepare for reconnect
[ 100.680182] frontend_changed: backend/vbd/10/2050: prepare for reconnect
[ 100.960133] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 100.975104] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 101.050714] alloc irq_desc for 381 on node 0
[ 101.050719] alloc kstat_irqs on node 0
[ 101.100575] alloc irq_desc for 380 on node 0
[ 101.100579] alloc kstat_irqs on node 0
[ 101.291924] device vif11.0 entered promiscuous mode
[ 101.306010] xen_bridge: port 5(vif11.0) entering learning state
[ 104.140576] xen_bridge: port 4(vif10.0) entering forwarding state
[ 106.259759] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 106.260121] alloc irq_desc for 379 on node 0
[ 106.260125] alloc kstat_irqs on node 0
[ 106.285503] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 106.285758] alloc irq_desc for 378 on node 0
[ 106.285761] alloc kstat_irqs on node 0
[ 112.051009] vif11.0: no IPv6 routers present
[ 112.611335] alloc irq_desc for 377 on node 0
[ 112.611340] alloc kstat_irqs on node 0
[ 112.957314] frontend_changed: backend/vbd/11/2049: prepare for reconnect
[ 112.962571] frontend_changed: backend/vbd/11/2050: prepare for reconnect
[ 113.178789] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 113.186888] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 113.279541] alloc irq_desc for 376 on node 0
[ 113.279546] alloc kstat_irqs on node 0
[ 113.611379] device vif12.0 entered promiscuous mode
[ 113.615226] xen_bridge: port 6(vif12.0) entering learning state
[ 114.071508] xen_bridge: port 6(vif12.0) entering disabled state
[ 114.074248] xen_bridge: port 6(vif12.0) entering disabled state
[ 116.305037] xen_bridge: port 5(vif11.0) entering forwarding state
[ 116.345201] alloc irq_desc for 375 on node 0
[ 116.345205] alloc kstat_irqs on node 0
[ 116.661053] device vif13.0 entered promiscuous mode
[ 116.680675] xen_bridge: port 6(vif13.0) entering learning state
[ 126.272798] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 126.273070] alloc irq_desc for 374 on node 0
[ 126.273074] alloc kstat_irqs on node 0
[ 126.286933] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 126.287202] alloc irq_desc for 373 on node 0
[ 126.287205] alloc kstat_irqs on node 0
[ 127.428012] vif13.0: no IPv6 routers present
[ 131.680016] xen_bridge: port 6(vif13.0) entering forwarding state
[ 132.483079] frontend_changed: backend/vbd/13/2049: prepare for reconnect
[ 132.486720] frontend_changed: backend/vbd/13/2050: prepare for reconnect
[ 132.700299] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 132.708453] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 132.750346] alloc irq_desc for 372 on node 0
[ 132.750352] alloc kstat_irqs on node 0
[ 132.773831] alloc irq_desc for 371 on node 0
[ 132.773836] alloc kstat_irqs on node 0
[ 134.019315] device vif14.0 entered promiscuous mode
[ 134.028894] xen_bridge: port 7(vif14.0) entering learning state
[ 134.317770] xen_bridge: port 7(vif14.0) entering disabled state
[ 134.325276] xen_bridge: port 7(vif14.0) entering disabled state
[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 35049 bytes --]
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [94] HyperTransport: #1a
Capabilities: [60] HyperTransport: Retry Mode
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=0 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: 1.0GHz
Link Error 0: <Prot+ <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD+
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [d0] HyperTransport: #1c
00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075d] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at ff00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00:07.0 Audio device [0403]: nVidia Corporation Device [10de:0774] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: HDA Intel
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:09.0 IDE interface [0101]: nVidia Corporation Device [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 406
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at f700 [size=16]
Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] SATA HBA <?>
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
Address: 00000000fee0100c Data: 4139
Capabilities: [ec] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP78S [GeForce 8200] Ethernet [10de:0760] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 404
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at f600 [size=8]
Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4 Enable+
Address: 00000000fee0100c Data: 4159
Masking: 0000fffe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 41d8
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4121
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 3, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:13.0 PCI bridge [0604]: nVidia Corporation Device [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4129
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:14.0 PCI bridge [0604]: nVidia Corporation Device [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd600000-fd6fffff
Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4131
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
01:08.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
01:08.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
01:08.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
01:0a.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:084d] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at e6000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
05:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Gammagraphx, Inc. Device [0000:0000]
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
06:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd8ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
06:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
06:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [1838:1074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 16
Region 0: Memory at fd8fd000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
07:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) [8086:10b9] (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter [8086:1083]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 405
Region 0: Memory at fd6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fd6c0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 9c00 [size=32]
Expansion ROM at fd6a0000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0100c Data: 4151
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Device Serial Number fe-68-2c-ff-ff-21-1b-00
Kernel driver in use: e1000e
[-- Attachment #5: menu.lst --]
[-- Type: application/octet-stream, Size: 376 bytes --]
title Xen-3.4.2-amd64 / Debian GNU/Linux, kernel 2.6.31.6-pvops
root (hd0,0)
kernel /xen-3.4.2.gz dom0_mem=768M com1=115200,8n1 console=com1,vga
module /vmlinuz-2.6.31.6 root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)
module /initrd.img-2.6.31.6
[-- Attachment #6: xm-dmesg.txt --]
[-- Type: text/plain, Size: 14808 bytes --]
__ __ _ _ ___ ___ _
\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___/ | _ __ _ __ ___
\ // _ \ \047_ \ | || |_| | | | | | |__| \047__/ __| |__| \047_ \| \047__/ _ \
/ \ __/ | | | |__ _| |_| | |_| |__| | | (__| |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|_| | .__/|_| \___|
|_|
(XEN) Xen version 4.0.0-rc1-pre (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Sun Dec 13 23:50:29 CET 2009
(XEN) Latest ChangeSet: Fri Dec 11 09:17:09 2009 +0000 20625:b928797213ac
(XEN) Command line: dom0_mem=768M loglvl=all loglvl_guest=all com1=115200,8n1 console=com1,vga
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000afee0000 (usable)
(XEN) 00000000afee0000 - 00000000afee3000 (ACPI NVS)
(XEN) 00000000afee3000 - 00000000afef0000 (ACPI data)
(XEN) 00000000afef0000 - 00000000aff00000 (reserved)
(XEN) 00000000b0000000 - 00000000c0000000 (reserved)
(XEN) 00000000f0000000 - 00000000f4000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000200000000 (usable)
(XEN) ACPI: RSDP 000F7550, 0024 (r2 Nvidia)
(XEN) ACPI: XSDT AFEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) ACPI: FACP AFEED3C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) ACPI Warning (tbfadt-0444): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
(XEN) ACPI: DSDT AFEE3280, A0D8 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
(XEN) ACPI: FACS AFEE0A80, 0040
(XEN) ACPI: SSDT AFEED600, 028A (r1 PTLTD POWERNOW 1 LTP 1)
(XEN) ACPI: HPET AFEED900, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
(XEN) ACPI: MCFG AFEED980, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) ACPI: APIC AFEED500, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) System RAM: 6882MB (7047252kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000200000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f59c0
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[1004,0], pm1x_evt[1000,0]
(XEN) ACPI: wakeup_vec[afee0a8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:11 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 15:11 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: IRQ14 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10de8201 base: 0xfeff0000
(XEN) PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
(XEN) PCI: MCFG area at f0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2500.057 MHz processor.
(XEN) CPU0: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 0(2) -> Core 0
(XEN) HVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) CPU0: AMD K8 machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU1: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 1(2) -> Core 1
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) HVM: ASIDs enabled.
(XEN) CPU1: AMD K8 machine check reporting enabled
(XEN) CPU1: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs:
(XEN) CPU#0 had -227 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 227 usecs TSC skew, fixed it up.
(XEN) Platform timer is 25.000MHz HPET
(XEN) Brought up 2 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x827000
(XEN) elf_parse_binary: phdr: paddr=0x1827000 memsz=0xe5eb8
(XEN) elf_parse_binary: phdr: paddr=0x190d000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x190e000 memsz=0x15860
(XEN) elf_parse_binary: phdr: paddr=0x1923860 memsz=0x1a67a0
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1aca000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81923a60
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81aca000
(XEN) virt_entry = 0xffffffff81923a60
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1aca000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000001f4000000->00000001f8000000 (180224 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81aca000
(XEN) Init. ramdisk: ffffffff81aca000->ffffffff82094000
(XEN) Phys-Mach map: ffffffff82094000->ffffffff82214000
(XEN) Start info: ffffffff82214000->ffffffff822144b4
(XEN) Page tables: ffffffff82215000->ffffffff8222a000
(XEN) Boot stack: ffffffff8222a000->ffffffff8222b000
(XEN) TOTAL: ffffffff80000000->ffffffff82400000
(XEN) ENTRY ADDRESS: ffffffff81923a60
(XEN) Dom0 has maximum 2 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81827000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81827000 -> 0xffffffff8190ceb8
(XEN) elf_load_binary: phdr 2 at 0xffffffff8190d000 -> 0xffffffff8190d888
(XEN) elf_load_binary: phdr 3 at 0xffffffff8190e000 -> 0xffffffff81923860
(XEN) elf_load_binary: phdr 4 at 0xffffffff81923860 -> 0xffffffff8199e000
(XEN) Scrubbing Free RAM: .............................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch input to Xen)
(XEN) Freed 156kB init memory.
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1427: dom0: pirq 0 or irq 3 already mapped
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1427: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1427: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector for irq:16
(XEN) irq.c:1427: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector for irq:17
(XEN) irq.c:1427: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector for irq:18
(XEN) irq.c:1427: dom0: pirq 0 or irq 18 already mapped
(XEN) allocated vector for irq:19
(XEN) irq.c:1427: dom0: pirq 0 or irq 19 already mapped
(XEN) allocated vector for irq:20
(XEN) irq.c:1427: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector for irq:21
(XEN) irq.c:1427: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector for irq:22
(XEN) irq.c:1427: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector for irq:23
(XEN) irq.c:1427: dom0: pirq 0 or irq 23 already mapped
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) MCE: val written to MC4_CTL should be all 0s or 1s (is fffffffffffffbff)
(XEN) MCE: val written to MC4_CTL should be all 0s or 1s (is fffffffffffffbff)
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:01.1
(XEN) PCI add device 00:01.2
(XEN) PCI add device 00:01.3
(XEN) PCI add device 00:01.4
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:04.0
(XEN) PCI add device 00:04.1
(XEN) PCI add device 00:06.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:09.0
(XEN) PCI add device 00:0a.0
(XEN) PCI add device 00:0b.0
(XEN) PCI add device 00:10.0
(XEN) PCI add device 00:12.0
(XEN) PCI add device 00:13.0
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 01:08.0
(XEN) PCI add device 01:08.1
(XEN) PCI add device 01:08.2
(XEN) PCI add device 01:0a.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 06:01.0
(XEN) PCI add device 06:01.1
(XEN) PCI add device 06:01.2
(XEN) PCI add device 07:00.0
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) Set CPU acpi_id(0) cpuid(0) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(0) cpuid(0) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PSS: state_count=6
(XEN) State0: 2500MHz 50000mW 100us 9us 0xe8201391 0x391
(XEN) State1: 2400MHz 46020mW 100us 9us 0xe82013d0 0x3d0
(XEN) State2: 2200MHz 38671mW 100us 9us 0xe820144e 0x44e
(XEN) State3: 2000MHz 32100mW 100us 9us 0xe82014cc 0x4cc
(XEN) State4: 1800MHz 26265mW 100us 9us 0xe820154a 0x54a
(XEN) State5: 1000MHz 13888mW 100us 9us 0xe8201582 0x582
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=253 num_processors=2
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(1) cpuid(1) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(1) cpuid(1) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PSS: state_count=6
(XEN) State0: 2500MHz 50000mW 100us 9us 0xe8201391 0x391
(XEN) State1: 2400MHz 46020mW 100us 9us 0xe82013d0 0x3d0
(XEN) State2: 2200MHz 38671mW 100us 9us 0xe820144e 0x44e
(XEN) State3: 2000MHz 32100mW 100us 9us 0xe82014cc 0x4cc
(XEN) State4: 1800MHz 26265mW 100us 9us 0xe820154a 0x54a
(XEN) State5: 1000MHz 13888mW 100us 9us 0xe8201582 0x582
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=253 num_processors=2
(XEN) _PPC: 0
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=16, irq=16
(XEN) ioapic_guest_write: new_entry=0001a910
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=16, irq=16
(XEN) ioapic_guest_write: new_entry=0001a910
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=16, irq=16
(XEN) ioapic_guest_write: new_entry=0001a910
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2282:
(XEN) ioapic_guest_write: apic=0, pin=21, irq=21
(XEN) ioapic_guest_write: new_entry=0001a915
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[-- Attachment #7: xm-info.txt --]
[-- Type: text/plain, Size: 1175 bytes --]
host : serveerstertje
release : 2.6.31.6
version : #1 SMP Sun Dec 13 23:35:36 CET 2009
machine : x86_64
nr_cpus : 2
nr_nodes : 1
cores_per_socket : 2
threads_per_core : 1
cpu_mhz : 2500
hw_caps : 178bf3ff:ebd3fbff:00000000:00000010:00002001:00000000:0000011f:00000000
virt_caps : hvm
total_memory : 6882
free_memory : 4532
node_to_cpu : node0:0-1
node_to_memory : node0:4532
xen_major : 4
xen_minor : 0
xen_extra : .0-rc1-pre
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : Fri Dec 11 09:17:09 2009 +0000 20625:b928797213ac
cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
cc_compile_by : root
cc_compile_domain :
cc_compile_date : Sun Dec 13 23:50:29 CET 2009
xend_config_format : 4
[-- Attachment #8: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices
2009-12-14 9:12 [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices Sander Eikelenboom
@ 2009-12-14 9:31 ` Sander Eikelenboom
2009-12-14 9:46 ` Sander Eikelenboom
2009-12-14 14:54 ` Konrad Rzeszutek Wilk
1 sibling, 1 reply; 7+ messages in thread
From: Sander Eikelenboom @ 2009-12-14 9:31 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel@lists.xensource.com
Whoops made a mistake, actually booted the xen-4.0.0-pre hypervisor.
Monday, December 14, 2009, 10:12:09 AM, you wrote:
> Hi Konrad,
> I was trying 2.6.31.6 pvops on my xen-3.4.2 server passing through 3 pci-devices, but none seems to get seized by pciback.
> On xen-3.4.2 in combination with a xenified 2.6.29 kernel/ 2.6.18.8-xen kernel it works fine with the same config in grub.
> Could this be due to the renaming stuff of blkdev pciback to xen-blkdev xen-pciback etc. ?
> Attachted:
> - xm info
> - xm dmesg
> - dmesg
> - lspci -vvvknn
> - .config 2.6.31.6 pvops kernel
> - grub menu.lst
> (if it helps i could send the same for the working combination.
> --
> Sander
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices
2009-12-14 9:31 ` Sander Eikelenboom
@ 2009-12-14 9:46 ` Sander Eikelenboom
2009-12-14 11:21 ` Sander Eikelenboom
0 siblings, 1 reply; 7+ messages in thread
From: Sander Eikelenboom @ 2009-12-14 9:46 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 966 bytes --]
Problem is the same on the real 3.4.2 + 2.6.31.6-pvops.
the right files attachted
Monday, December 14, 2009, 10:31:05 AM, you wrote:
> Whoops made a mistake, actually booted the xen-4.0.0-pre hypervisor.
> Monday, December 14, 2009, 10:12:09 AM, you wrote:
>> Hi Konrad,
>> I was trying 2.6.31.6 pvops on my xen-3.4.2 server passing through 3 pci-devices, but none seems to get seized by pciback.
>> On xen-3.4.2 in combination with a xenified 2.6.29 kernel/ 2.6.18.8-xen kernel it works fine with the same config in grub.
>> Could this be due to the renaming stuff of blkdev pciback to xen-blkdev xen-pciback etc. ?
>> Attachted:
>> - xm info
>> - xm dmesg
>> - dmesg
>> - lspci -vvvknn
>> - .config 2.6.31.6 pvops kernel
>> - grub menu.lst
>> (if it helps i could send the same for the working combination.
>> --
>> Sander
--
Best regards,
Sander mailto:linux@eikelenboom.it
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 67671 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31.6
# Sun Dec 13 23:14:56 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_VSYSCALL=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_EVENT_PROFILE=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_TIME_VSYSCALL=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_DOM0_PCI=y
CONFIG_MICROCODE_XEN=y
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_CLOCK_VSYSCALL=y
CONFIG_PARAVIRT_DEBUG=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_NEW_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_IMQ=m
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_IMQ=m
# CONFIG_IMQ_BEHAVIOR_AA is not set
CONFIG_IMQ_BEHAVIOR_AB=y
# CONFIG_IMQ_BEHAVIOR_BA is not set
# CONFIG_IMQ_BEHAVIOR_BB is not set
CONFIG_IMQ_NUM_DEVS=16
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH_COMMON=y
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETCHANNEL2 is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_BLKDEV_TAP=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XEN_PCIDEV_BACKEND=y
# CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set
CONFIG_XEN_PCIDEV_BACKEND_PASS=y
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set
CONFIG_XEN_PCIDEV_BE_DEBUG=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_S3=y
CONFIG_ACPI_PROCESSOR_XEN=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_TRACE is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 112665 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.6 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sun Dec 13 23:35:36 CET 2009
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 30000-afee0
[ 0.000000] xen_release_chunk: looking at area pfn aff00-b0000
[ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000
[ 0.000000] xen_release_chunk: looking at area pfn f4000-fec00
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
[ 0.000000] Xen: 00000000afee3000 - 00000000afef0000 (ACPI data)
[ 0.000000] Xen: 00000000afef0000 - 00000000aff00000 (reserved)
[ 0.000000] Xen: 00000000b0000000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
[ 0.000000] modified: 00000000afee3000 - 00000000afef0000 (ACPI data)
[ 0.000000] modified: 00000000afef0000 - 00000000aff00000 (reserved)
[ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] 0000000000 - 0030000000 page 4k
[ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000
[ 0.000000] RAMDISK: 01aca000 - 02094000
[ 0.000000] ACPI: RSDP 00000000000f7550 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000afee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000afeed3c0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558
[ 0.000000] ACPI: DSDT 00000000afee3280 0A0D8 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000afee0a80 00040
[ 0.000000] ACPI: SSDT 00000000afeed600 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000afeed900 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000afeed980 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000afeed500 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0002215000 - 000222a000] XEN PAGETABLES ==> [0002215000 - 000222a000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001aa9574] TEXT DATA BSS ==> [0001000000 - 0001aa9574]
[ 0.000000] #4 [0001aca000 - 0002094000] RAMDISK ==> [0001aca000 - 0002094000]
[ 0.000000] #5 [0002094000 - 0002215000] XEN START INFO ==> [0002094000 - 0002215000]
[ 0.000000] #6 [0001aaa000 - 0001aaa151] BRK ==> [0001aaa000 - 0001aaa151]
[ 0.000000] #7 [0000100000 - 000026a000] PGTABLE ==> [0000100000 - 000026a000]
[ 0.000000] found SMP MP-table at [ffff8800000f59c0] f59c0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] On node 0 totalpages: 196495
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 365 pages reserved
[ 0.000000] DMA zone: 3562 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 2632 pages used for memmap
[ 0.000000] DMA32 zone: 189880 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:7fee0000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 22 4k pages, static data 88160 bytes
[ 0.000000] trying to map vcpu_info 0 at ffffc9000000b060, mfn 1f6241, offset 96
[ 0.000000] cpu 0 using vcpu_info at ffffc9000000b060
[ 0.000000] trying to map vcpu_info 1 at ffffc90000023060, mfn 1f6257, offset 96
[ 0.000000] cpu 1 using vcpu_info at ffffc90000023060
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193442
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)
[ 0.000000] Unknown boot option `pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)': ignoring
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
[ 0.000000] xen_swiotlb_fixup: buf=ffff8800030ab000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000710b000 size=32768
[ 0.000000] Placing 64MB Xen software IO TLB between ffff8800030ab000 - ffff8800070ab000
[ 0.000000] Xen software IO TLB at phys 0x30ab000 - 0x70ab000
[ 0.000000] Memory: 686848k/786432k available (5640k kernel code, 452k absent, 98460k reserved, 3626k data, 528k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] xen: registering gsi 0 triggering 1 polarity 0
[ 0.000000] xen: --> irq=0
[ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 240 ioapic 0 pin 0 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 1 triggering 1 polarity 0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 3 triggering 1 polarity 0
[ 0.000000] xen: --> irq=3
[ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 4 triggering 1 polarity 0
[ 0.000000] xen: --> irq=4
[ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 5 triggering 1 polarity 0
[ 0.000000] xen: --> irq=5
[ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 48 ioapic 0 pin 5 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 6 triggering 1 polarity 0
[ 0.000000] xen: --> irq=6
[ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 56 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 7 triggering 1 polarity 0
[ 0.000000] xen: --> irq=7
[ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 64 ioapic 0 pin 7 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 8 triggering 1 polarity 0
[ 0.000000] xen: --> irq=8
[ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen: --> irq=9
[ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 80 ioapic 0 pin 9 triggering 1 polarity 0
[ 0.000000] xen: registering gsi 10 triggering 1 polarity 0
[ 0.000000] xen: --> irq=10
[ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 88 ioapic 0 pin 10 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 11 triggering 1 polarity 0
[ 0.000000] xen: --> irq=11
[ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 96 ioapic 0 pin 11 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 12 triggering 1 polarity 0
[ 0.000000] xen: --> irq=12
[ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 104 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 13 triggering 1 polarity 0
[ 0.000000] xen: --> irq=13
[ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 14 triggering 1 polarity 0
[ 0.000000] xen: --> irq=14
[ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 120 ioapic 0 pin 14 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 15 triggering 1 polarity 0
[ 0.000000] xen: --> irq=15
[ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 136 ioapic 0 pin 15 triggering 0 polarity 0
[ 0.000000] Detected 2500.002 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [tty1]
[ 0.000999] console [hvc0] enabled
[ 0.000999] Xen: using vcpuop timer interface
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] alloc irq_desc for 423 on node 0
[ 0.000999] alloc kstat_irqs on node 0
[ 0.000999] xen: vcpu_time_info placement not supported
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.00 BogoMIPS (lpj=2500002)
[ 0.001037] Security Framework initialized
[ 0.001999] SELinux: Initializing.
[ 0.002009] SELinux: Starting in permissive mode
[ 0.002018] Mount-cache hash table entries: 256
[ 0.003175] Initializing cgroup subsys ns
[ 0.003999] Initializing cgroup subsys cpuacct
[ 0.004004] Initializing cgroup subsys freezer
[ 0.005020] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.006002] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.007002] tseg: 00aff00000
[ 0.007005] CPU: Physical Processor ID: 0
[ 0.007998] CPU: Processor Core ID: 0
[ 0.008003] mce: CPU supports 5 MCE banks
[ 0.009032] Performance Counters: AMD PMU driver.
[ 0.009998] ------------[ cut here ]------------
[ 0.009998] WARNING: at /usr/src/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:720 xen_apic_write+0x15/0x17()
[ 0.009998] Hardware name: System Product Name
[ 0.009998] Modules linked in:
[ 0.009998] Pid: 0, comm: swapper Not tainted 2.6.31.6 #1
[ 0.009998] Call Trace:
[ 0.009998] [<ffffffff8102b7b6>] ? xen_apic_write+0x15/0x17
[ 0.009998] [<ffffffff8106bdb4>] warn_slowpath_common+0x77/0xa4
[ 0.009998] [<ffffffff8106bdf0>] warn_slowpath_null+0xf/0x11
[ 0.009998] [<ffffffff8102b7b6>] xen_apic_write+0x15/0x17
[ 0.009998] [<ffffffff8103f4a7>] perf_counters_lapic_init+0x2e/0x30
[ 0.009998] [<ffffffff8192d8c9>] init_hw_perf_counters+0x305/0x3a2
[ 0.009998] [<ffffffff8102f7ff>] ? xen_restore_fl_direct_end+0x0/0x1
[ 0.009998] [<ffffffff810fac40>] ? kmem_cache_alloc+0xcb/0x12d
[ 0.009998] [<ffffffff8192d595>] identify_boot_cpu+0x3c/0x3e
[ 0.009998] [<ffffffff8192d5a0>] check_bugs+0x9/0x2d
[ 0.009998] [<ffffffff81924630>] start_kernel+0x41d/0x432
[ 0.009998] [<ffffffff81923b1f>] x86_64_start_reservations+0xaa/0xae
[ 0.009998] [<ffffffff8192829a>] xen_start_kernel+0x633/0x63a
[ 0.009998] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.009998] ... version: 0
[ 0.009998] ... bit width: 48
[ 0.009998] ... generic counters: 4
[ 0.009998] ... value mask: 0000ffffffffffff
[ 0.009998] ... max period: 00007fffffffffff
[ 0.009998] ... fixed-purpose counters: 0
[ 0.009998] ... counter mask: 000000000000000f
[ 0.009998] SMP alternatives: switching to UP code
[ 0.011998] ACPI: Core revision 20090521
[ 0.031098] alloc irq_desc for 422 on node 0
[ 0.031102] alloc kstat_irqs on node 0
[ 0.031112] alloc irq_desc for 421 on node 0
[ 0.031114] alloc kstat_irqs on node 0
[ 0.031120] alloc irq_desc for 420 on node 0
[ 0.031122] alloc kstat_irqs on node 0
[ 0.031127] alloc irq_desc for 419 on node 0
[ 0.031130] alloc kstat_irqs on node 0
[ 0.031306] installing Xen timer for CPU 1
[ 0.031514] alloc irq_desc for 418 on node 0
[ 0.031517] alloc kstat_irqs on node 0
[ 0.031551] SMP alternatives: switching to SMP code
[ 0.031995] alloc irq_desc for 417 on node 0
[ 0.031995] alloc kstat_irqs on node 0
[ 0.032009] alloc irq_desc for 416 on node 0
[ 0.032012] alloc kstat_irqs on node 0
[ 0.032018] alloc irq_desc for 415 on node 0
[ 0.032020] alloc kstat_irqs on node 0
[ 0.032026] alloc irq_desc for 414 on node 0
[ 0.032028] alloc kstat_irqs on node 0
[ 0.000014] Initializing CPU#1
[ 0.000068] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000071] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000074] CPU: Physical Processor ID: 0
[ 0.000076] CPU: Processor Core ID: 1
[ 0.000078] mce: CPU supports 5 MCE banks
[ 0.032171] Brought up 2 CPUs
[ 0.033160] Booting paravirtualized kernel on Xen
[ 0.033204] Xen version: 3.4.2 (preserve-AD) (dom0)
[ 0.034021] Grant tables using version 1 layout.
[ 0.034236] Grant table initialized
[ 0.034498] Time: 9:34:32 Date: 12/14/09
[ 0.034790] NET: Registered protocol family 16
[ 0.035040] alloc irq_desc for 413 on node 0
[ 0.035040] alloc kstat_irqs on node 0
[ 0.035041] xenbus_probe_init ok
[ 0.036013] node 0 link 0: io port [9000, ffff]
[ 0.036020] TOM: 00000000c0000000 aka 3072M
[ 0.036226] node 0 link 0: mmio [a0000, bffff]
[ 0.036232] node 0 link 0: mmio [c0000000, efffffff]
[ 0.036238] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.036244] node 0 link 0: mmio [f0000000, f07fffff]
[ 0.036248] TOM2: 0000000200000000 aka 8192M
[ 0.036449] bus: [00,07] on node 0 link 0
[ 0.036452] bus: 00 index 0 io port: [0, ffff]
[ 0.036455] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.036458] bus: 00 index 2 mmio: [c0000000, f3ffffff]
[ 0.036461] bus: 00 index 3 mmio: [f4000000, ffffffff]
[ 0.036463] bus: 00 index 4 mmio: [200000000, fcffffffff]
[ 0.036480] ACPI: bus type pci registered
[ 0.036696] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.036994] PCI: MCFG area at f0000000 reserved in E820
[ 0.052794] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.052991] PCI: Using configuration type 1 for base access
[ 0.068111] bio: create slab <bio-0> at 0
[ 0.069353] ACPI: EC: Look up EC in DSDT
[ 0.088361] ACPI: Interpreter enabled
[ 0.088569] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.088960] ACPI: Using IOAPIC for interrupt routing
[ 0.123426] ACPI: No dock devices found.
[ 0.124094] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.124409] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f]
[ 0.124435] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.124444] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.124480] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.124690] pci 0000:00:01.1: PME# disabled
[ 0.125122] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff]
[ 0.125343] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.125400] pci 0000:00:02.0: supports D1 D2
[ 0.125403] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125611] pci 0000:00:02.0: PME# disabled
[ 0.125861] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.125928] pci 0000:00:02.1: supports D1 D2
[ 0.125931] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125980] pci 0000:00:02.1: PME# disabled
[ 0.126033] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.126090] pci 0000:00:04.0: supports D1 D2
[ 0.126093] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126326] pci 0000:00:04.0: PME# disabled
[ 0.126576] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.126643] pci 0000:00:04.1: supports D1 D2
[ 0.126646] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126854] pci 0000:00:04.1: PME# disabled
[ 0.127053] pci 0000:00:06.0: reg 20 io port: [0xfc00-0xfc0f]
[ 0.127129] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
[ 0.127187] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.127393] pci 0000:00:07.0: PME# disabled
[ 0.128121] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.128130] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.128138] pci 0000:00:09.0: reg 18 io port: [0x970-0x977]
[ 0.128146] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73]
[ 0.128154] pci 0000:00:09.0: reg 20 io port: [0xf700-0xf70f]
[ 0.128162] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff]
[ 0.128268] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.128276] pci 0000:00:0a.0: reg 14 io port: [0xf600-0xf607]
[ 0.128285] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff]
[ 0.128293] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f]
[ 0.128344] pci 0000:00:0a.0: supports D1 D2
[ 0.128347] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128980] pci 0000:00:0a.0: PME# disabled
[ 0.129066] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.129980] pci 0000:00:0b.0: PME# disabled
[ 0.130253] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130980] pci 0000:00:10.0: PME# disabled
[ 0.131248] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131979] pci 0000:00:12.0: PME# disabled
[ 0.132244] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.132979] pci 0000:00:13.0: PME# disabled
[ 0.133245] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133979] pci 0000:00:14.0: PME# disabled
[ 0.134320] pci 0000:01:08.0: reg 20 io port: [0xec00-0xec1f]
[ 0.134361] pci 0000:01:08.0: supports D1 D2
[ 0.134364] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.134979] pci 0000:01:08.0: PME# disabled
[ 0.135049] pci 0000:01:08.1: reg 20 io port: [0xe800-0xe81f]
[ 0.135090] pci 0000:01:08.1: supports D1 D2
[ 0.135093] pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.135979] pci 0000:01:08.1: PME# disabled
[ 0.136022] pci 0000:01:08.2: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff]
[ 0.136090] pci 0000:01:08.2: supports D1 D2
[ 0.136093] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.136979] pci 0000:01:08.2: PME# disabled
[ 0.137034] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfdefe000-0xfdefefff]
[ 0.137102] pci 0000:01:0a.0: supports D1 D2
[ 0.137105] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.137978] pci 0000:01:0a.0: PME# disabled
[ 0.138025] pci 0000:00:08.0: transparent bridge
[ 0.138978] pci 0000:00:08.0: bridge io port: [0xe000-0xefff]
[ 0.138978] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.138978] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.139023] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.139036] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
[ 0.139049] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff]
[ 0.139057] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.139065] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.139151] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff]
[ 0.139157] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
[ 0.139165] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd8000000-0xe7ffffff]
[ 0.139262] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff]
[ 0.139272] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.139290] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.139388] pci 0000:00:12.0: bridge io port: [0xb000-0xbfff]
[ 0.139399] pci 0000:00:12.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.139416] pci 0000:00:12.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.139564] pci 0000:05:00.0: supports D1 D2
[ 0.139666] pci 0000:00:13.0: bridge io port: [0xa000-0xafff]
[ 0.139676] pci 0000:00:13.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.139694] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
[ 0.139762] pci 0000:06:01.0: reg 10 32bit mmio: [0xfd8ff000-0xfd8fffff]
[ 0.139855] pci 0000:06:01.0: supports D1 D2
[ 0.139858] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.139978] pci 0000:06:01.0: PME# disabled
[ 0.140036] pci 0000:06:01.1: reg 10 32bit mmio: [0xfd8fe000-0xfd8fefff]
[ 0.140130] pci 0000:06:01.1: supports D1 D2
[ 0.140133] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.140978] pci 0000:06:01.1: PME# disabled
[ 0.141036] pci 0000:06:01.2: reg 10 32bit mmio: [0xfd8fd000-0xfd8fd0ff]
[ 0.141130] pci 0000:06:01.2: supports D1 D2
[ 0.141132] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.141978] pci 0000:06:01.2: PME# disabled
[ 0.142084] pci 0000:05:00.0: bridge io port: [0xa000-0xafff]
[ 0.142091] pci 0000:05:00.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.142103] pci 0000:05:00.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
[ 0.142203] pci 0000:07:00.0: reg 10 32bit mmio: [0xfd6e0000-0xfd6fffff]
[ 0.142217] pci 0000:07:00.0: reg 14 32bit mmio: [0xfd6c0000-0xfd6dffff]
[ 0.142231] pci 0000:07:00.0: reg 18 io port: [0x9c00-0x9c1f]
[ 0.142276] pci 0000:07:00.0: reg 30 32bit mmio: [0xfd6a0000-0xfd6bffff]
[ 0.142336] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.142978] pci 0000:07:00.0: PME# disabled
[ 0.143071] pci 0000:00:14.0: bridge io port: [0x9000-0x9fff]
[ 0.143081] pci 0000:00:14.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
[ 0.143099] pci 0000:00:14.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff]
[ 0.143174] pci_bus 0000:00: on NUMA node 0
[ 0.143182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.143865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.338164] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
[ 0.338951] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15)
[ 0.338951] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15)
[ 0.338951] ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15)
[ 0.338951] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.338951] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.339139] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.340042] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.340951] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.340951] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.340951] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15)
[ 0.341056] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15)
[ 0.341951] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.341951] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.342058] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.342951] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.342951] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
[ 0.342951] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.342951] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.342951] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
[ 0.342951] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0
[ 0.342951] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
[ 0.342951] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
[ 0.342951] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
[ 0.343123] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
[ 0.343951] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
[ 0.343951] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.344128] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
[ 0.344951] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
[ 0.344951] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
[ 0.344951] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
[ 0.344951] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.344951] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.344951] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.345121] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.345951] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.345951] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.345951] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.345993] sync cpu 0 get result ffffffff max_id 0
[ 0.345993] Failed to sync pcpu 0
[ 0.346989] xenbus_probe_backend_init bus registered ok
[ 0.347990] xenbus_probe_frontend_init bus registered ok
[ 0.348951] xen_balloon: Initialising balloon driver with page order 0.
[ 0.349070] SCSI subsystem initialized
[ 0.349993] libata version 3.00 loaded.
[ 0.349994] usbcore: registered new interface driver usbfs
[ 0.350990] usbcore: registered new interface driver hub
[ 0.351985] usbcore: registered new device driver usb
[ 0.352996] PCI: Using ACPI for IRQ routing
[ 0.353951] IO APIC resources couldn't be allocated.
[ 0.387993] cfg80211: Using static regulatory domain info
[ 0.388218] cfg80211: Regulatory domain: US
[ 0.388419] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.388787] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.388951] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.388951] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.388951] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.388951] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.388951] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.388963] cfg80211: Calling CRDA for country: US
[ 0.389991] NetLabel: Initializing
[ 0.390951] NetLabel: domain hash size = 128
[ 0.390951] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.390951] NetLabel: unlabeled traffic allowed by default
[ 0.391961] Switched to high resolution mode on CPU 0
[ 0.395443] Switched to high resolution mode on CPU 1
[ 0.398021] pnp: PnP ACPI init
[ 0.398245] ACPI: bus type pnp registered
[ 0.400173] xen: registering gsi 8 triggering 1 polarity 0
[ 0.400176] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.401004] xen: --> irq=8
[ 0.401004] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.413466] xen: registering gsi 13 triggering 1 polarity 0
[ 0.413469] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.414442] xen: --> irq=13
[ 0.414442] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.428974] xen: registering gsi 6 triggering 1 polarity 0
[ 0.428977] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.429423] xen: --> irq=6
[ 0.429423] xen_set_ioapic_routing: irq 6 gsi 6 vector 56 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.442991] xen: registering gsi 4 triggering 1 polarity 0
[ 0.442995] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.443316] xen: --> irq=4
[ 0.443316] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 0 polarity 0
[ 0.464440] pnp: PnP ACPI: found 12 devices
[ 0.464643] ACPI: ACPI bus type pnp unregistered
[ 0.465421] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.465421] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.465421] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.465421] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.465421] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.465421] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.465421] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.465421] system 00:01: iomem range 0xb0000000-0xbfffffff has been reserved
[ 0.465421] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.465421] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.465421] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.465421] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.465421] system 00:0b: iomem range 0xcd600-0xcffff could not be reserved
[ 0.465421] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.465421] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.465421] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.465421] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.465421] system 00:0b: iomem range 0xafee0000-0xafefffff could not be reserved
[ 0.465421] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.465421] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.465421] system 00:0b: iomem range 0x100000-0xafedffff could not be reserved
[ 0.465421] system 00:0b: iomem range 0xafff0000-0xbffeffff could not be reserved
[ 0.465421] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.465421] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.465421] system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.465421] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.465421] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.465421] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.661357] pciback 0000:00:00.0: probing...
[ 0.661368] pciback 0000:00:01.0: probing...
[ 0.661376] pciback 0000:00:01.1: probing...
[ 0.661385] pciback 0000:00:01.2: probing...
[ 0.661393] pciback 0000:00:01.3: probing...
[ 0.661401] pciback 0000:00:01.4: probing...
[ 0.661410] pciback 0000:00:02.0: probing...
[ 0.661418] pciback 0000:00:02.1: probing...
[ 0.661427] pciback 0000:00:04.0: probing...
[ 0.661435] pciback 0000:00:04.1: probing...
[ 0.661444] pciback 0000:00:06.0: probing...
[ 0.661452] pciback 0000:00:07.0: probing...
[ 0.661461] pciback 0000:00:08.0: probing...
[ 0.661470] pciback 0000:00:09.0: probing...
[ 0.661478] pciback 0000:00:0a.0: probing...
[ 0.661487] pciback 0000:00:0b.0: probing...
[ 0.661495] pciback 0000:00:10.0: probing...
[ 0.661504] pciback 0000:00:12.0: probing...
[ 0.661513] pciback 0000:00:13.0: probing...
[ 0.661521] pciback 0000:00:14.0: probing...
[ 0.661530] pciback 0000:00:18.0: probing...
[ 0.661538] pciback 0000:00:18.1: probing...
[ 0.661547] pciback 0000:00:18.2: probing...
[ 0.661555] pciback 0000:00:18.3: probing...
[ 0.661563] pciback 0000:01:08.0: probing...
[ 0.661571] pciback 0000:01:08.1: probing...
[ 0.661579] pciback 0000:01:08.2: probing...
[ 0.661588] pciback 0000:01:0a.0: probing...
[ 0.661596] pciback 0000:02:00.0: probing...
[ 0.661604] pciback 0000:05:00.0: probing...
[ 0.661612] pciback 0000:06:01.0: probing...
[ 0.661620] pciback 0000:06:01.1: probing...
[ 0.661629] pciback 0000:06:01.2: probing...
[ 0.661637] pciback 0000:07:00.0: probing...
[ 0.667344] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.667551] pci 0000:00:08.0: IO window: 0xe000-0xefff
[ 0.668001] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff
[ 0.668001] pci 0000:00:08.0: PREFETCH window: 0xfdd00000-0xfddfffff
[ 0.668001] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.668001] pci 0000:00:0b.0: IO window: 0xd000-0xdfff
[ 0.668001] pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff
[ 0.668001] pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff
[ 0.668001] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.668001] pci 0000:00:10.0: IO window: 0xc000-0xcfff
[ 0.668001] pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.668001] pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.668001] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
[ 0.668001] pci 0000:00:12.0: IO window: 0xb000-0xbfff
[ 0.668001] pci 0000:00:12.0: MEM window: 0xfda00000-0xfdafffff
[ 0.668001] pci 0000:00:12.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.668001] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
[ 0.668001] pci 0000:05:00.0: IO window: 0xa000-0xafff
[ 0.668001] pci 0000:05:00.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.668001] pci 0000:05:00.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[ 0.668001] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
[ 0.668001] pci 0000:00:13.0: IO window: 0xa000-0xafff
[ 0.668001] pci 0000:00:13.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.668001] pci 0000:00:13.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[ 0.668001] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07
[ 0.668001] pci 0000:00:14.0: IO window: 0x9000-0x9fff
[ 0.668001] pci 0000:00:14.0: MEM window: 0xfd600000-0xfd6fffff
[ 0.668001] pci 0000:00:14.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff
[ 0.668001] pci 0000:00:08.0: setting latency timer to 64
[ 0.668001] pci 0000:00:0b.0: setting latency timer to 64
[ 0.836565] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
[ 0.837063] xen: registering gsi 16 triggering 0 polarity 1
[ 0.837063] alloc irq_desc for 16 on node 0
[ 0.837063] alloc kstat_irqs on node 0
[ 0.841576] xen: --> irq=16
[ 0.841580] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.842571] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
[ 0.842571] pci 0000:00:10.0: setting latency timer to 64
[ 0.842571] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
[ 0.842571] xen: registering gsi 16 triggering 0 polarity 1
[ 0.842571] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.842571] xen: --> irq=16
[ 0.842571] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.842571] pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
[ 0.842571] pci 0000:00:12.0: setting latency timer to 64
[ 0.842571] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
[ 0.842571] xen: registering gsi 16 triggering 0 polarity 1
[ 0.842571] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.842571] xen: --> irq=16
[ 0.842571] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.842571] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
[ 0.842571] pci 0000:00:13.0: setting latency timer to 64
[ 0.842571] pci 0000:05:00.0: setting latency timer to 64
[ 0.842571] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
[ 0.842571] xen: registering gsi 16 triggering 0 polarity 1
[ 0.842571] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.842571] xen: --> irq=16
[ 0.842571] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.842571] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
[ 0.842571] pci 0000:00:14.0: setting latency timer to 64
[ 0.842571] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.842571] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.842571] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.842571] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.842571] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.842571] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.842571] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.842571] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.842571] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff]
[ 0.842571] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff]
[ 0.842571] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.842571] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.842571] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.842571] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.842571] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.842571] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.842571] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
[ 0.842571] pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.842571] pci_bus 0000:05: resource 2 pref mem [0xfd700000-0xfd7fffff]
[ 0.842571] pci_bus 0000:06: resource 0 io: [0xa000-0xafff]
[ 0.842571] pci_bus 0000:06: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.842571] pci_bus 0000:06: resource 2 pref mem [0xfd700000-0xfd7fffff]
[ 0.842571] pci_bus 0000:07: resource 0 io: [0x9000-0x9fff]
[ 0.842571] pci_bus 0000:07: resource 1 mem: [0xfd600000-0xfd6fffff]
[ 0.842571] pci_bus 0000:07: resource 2 pref mem [0xfd500000-0xfd5fffff]
[ 0.944304] NET: Registered protocol family 2
[ 0.948406] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.957023] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.958002] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.958002] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.958002] TCP reno registered
[ 0.980364] NET: Registered protocol family 1
[ 0.984461] Trying to unpack rootfs image as initramfs...
[ 0.996455] Freeing initrd memory: 5928k freed
[ 1.000155] kvm: no hardware support
[ 1.000365] has_svm: svm not available
[ 1.001009] kvm: no hardware support
[ 1.007166] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.008003] Scanning for low memory corruption every 60 seconds
[ 1.020286] audit: initializing netlink socket (disabled)
[ 1.023253] type=2000 audit(1260783273.421:1): initialized
[ 1.036538] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.041451] VFS: Disk quotas dquot_6.5.2
[ 1.041779] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.048345] msgmni has been set to 1354
[ 1.051169] SELinux: Registering netfilter hooks
[ 1.051847] alg: No test for stdrng (krng)
[ 1.053938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.054899] io scheduler noop registered
[ 1.054899] io scheduler anticipatory registered
[ 1.054899] io scheduler deadline registered
[ 1.075965] io scheduler cfq registered (default)
[ 1.118126] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.120690] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.124855] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.130410] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.131242] pci 0000:01:08.0: uhci_check_and_reset_hc: legsup = 0x2000
[ 1.131242] pci 0000:01:08.0: Performing full reset
[ 1.136067] pci 0000:01:08.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 1.136070] pci 0000:01:08.1: Performing full reset
[ 1.136114] pci 0000:02:00.0: Boot video device
[ 1.136676] alloc irq_desc for 412 on node 0
[ 1.136679] alloc kstat_irqs on node 0
[ 1.136771] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 1.137331] alloc irq_desc for 411 on node 0
[ 1.137334] alloc kstat_irqs on node 0
[ 1.137419] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 1.137953] alloc irq_desc for 410 on node 0
[ 1.137956] alloc kstat_irqs on node 0
[ 1.138047] pcieport-driver 0000:00:13.0: setting latency timer to 64
[ 1.138584] alloc irq_desc for 409 on node 0
[ 1.138586] alloc kstat_irqs on node 0
[ 1.138671] pcieport-driver 0000:00:14.0: setting latency timer to 64
[ 1.139106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.140483] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.141475] ACPI: Power Button [PWRF]
[ 1.152536] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.153529] ACPI: Power Button [PWRB]
[ 1.163679] fan PNP0C0B:00: registered as cooling_device0
[ 1.164670] ACPI: Fan [FAN] (on)
[ 1.185742] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-946
[ 1.186002] ACPI: Expecting a [Reference] package element, found type 0
[ 1.186002] ACPI: Invalid passive threshold
[ 1.197348] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.198038] ACPI: Thermal Zone [THRM] (40 C)
[ 1.209540] Event-channel device installed.
[ 1.217496] blktap_device_init: blktap device major 253
[ 1.217740] blktap_ring_init: blktap ring major: 251
[ 1.224256] registering netback
[ 1.225995] pciback: pcistub_init_devices_late
[ 1.232172] alloc irq_desc for 408 on node 0
[ 1.232176] alloc kstat_irqs on node 0
[ 1.233152] hpet_acpi_add: no address or irqs in _CRS
[ 1.233539] Non-volatile memory driver v1.3
[ 1.234281] Linux agpgart interface v0.103
[ 1.238515] [drm] Initialized drm 1.1.0 20060810
[ 1.239494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.255110] brd: module loaded
[ 1.256867] loop: module loaded
[ 1.257252] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.265208] ahci 0000:00:09.0: version 3.0
[ 1.265760] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.266130] xen: registering gsi 23 triggering 0 polarity 1
[ 1.266130] alloc irq_desc for 23 on node 0
[ 1.266130] alloc kstat_irqs on node 0
[ 1.270286] xen: --> irq=23
[ 1.270290] xen_set_ioapic_routing: irq 23 gsi 23 vector 184 ioapic 0 pin 23 triggering 1 polarity 1
[ 1.271271] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.271271] alloc irq_desc for 407 on node 0
[ 1.271271] alloc kstat_irqs on node 0
[ 1.287052] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 1.287968] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 1.287968] ahci 0000:00:09.0: setting latency timer to 64
[ 1.303286] scsi0 : ahci
[ 1.305227] scsi1 : ahci
[ 1.306524] scsi2 : ahci
[ 1.309287] scsi3 : ahci
[ 1.312054] scsi4 : ahci
[ 1.314811] scsi5 : ahci
[ 1.317791] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 407
[ 1.318541] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 407
[ 1.318541] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 407
[ 1.318541] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 407
[ 1.318541] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 407
[ 1.318541] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 407
[ 1.363538] pata_amd 0000:00:06.0: version 0.4.1
[ 1.363597] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.363743] scsi6 : pata_amd
[ 1.366186] scsi7 : pata_amd
[ 1.371244] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.371252] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.383016] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 1.384004] Copyright (c) 1999-2006 Intel Corporation.
[ 1.395137] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.396122] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.396122] xen: registering gsi 16 triggering 0 polarity 1
[ 1.396122] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.396122] xen: --> irq=16
[ 1.396122] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 1.396122] e1000e 0000:07:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
[ 1.396122] e1000e 0000:07:00.0: setting latency timer to 64
[ 1.396122] alloc irq_desc for 406 on node 0
[ 1.396122] alloc kstat_irqs on node 0
[ 1.582057] 0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:2c:68:fe
[ 1.582455] 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.582739] 0000:07:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50854-003
[ 1.583105] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.583311] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.583753] sky2 driver version 1.23
[ 1.584049] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.584990] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 1.585223] xen: registering gsi 22 triggering 0 polarity 1
[ 1.585229] alloc irq_desc for 22 on node 0
[ 1.585231] alloc kstat_irqs on node 0
[ 1.585237] xen: --> irq=22
[ 1.585241] xen_set_ioapic_routing: irq 22 gsi 22 vector 208 ioapic 0 pin 22 triggering 1 polarity 1
[ 1.585420] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 1.585420] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.668021] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.668283] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.668503] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.668721] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.668947] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.821017] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.822491] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 1.822702] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.824314] ata1.00: configured for UDMA/133
[ 1.824626] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[ 1.825462] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.825908] sd 0:0:0:0: [sda] Write Protect is off
[ 1.826112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.826161] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.826750] sda:
[ 1.826940] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.827556] ata8: port disabled. ignoring.
[ 1.831357] sda1 sda2
[ 1.832162] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.098561] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x1374 @ 1, addr 00:1f:c6:8c:5e:b2
[ 2.098935] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 2.099636] console [netcon0] enabled
[ 2.099837] netconsole: network logging started
[ 2.100311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.100518] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 2.101090] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21
[ 2.101296] xen: registering gsi 21 triggering 0 polarity 1
[ 2.101296] alloc irq_desc for 21 on node 0
[ 2.101296] alloc kstat_irqs on node 0
[ 2.101323] xen: --> irq=21
[ 2.101326] xen_set_ioapic_routing: irq 21 gsi 21 vector 216 ioapic 0 pin 21 triggering 1 polarity 1
[ 2.101706] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 21 (level, low) -> IRQ 21
[ 2.102100] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 2.102105] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.102367] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 2.102373] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.102475] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.102849] ehci_hcd 0000:00:02.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6
[ 2.102857] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0
[ 2.102861] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 2.102914] ehci_hcd 0000:00:02.1: park 0
[ 2.102920] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.102935] ehci_hcd 0000:00:02.1: debug port 1
[ 2.103141] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 2.103144] ehci_hcd 0000:00:02.1: supports USB remote wakeup
[ 2.103175] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 2.103381] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.103388] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 2.109016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.109287] usb usb1: default language 0x0409
[ 2.109299] usb usb1: udev 1, busnum 1, minor = 0
[ 2.109302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.109508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.109875] usb usb1: Product: EHCI Host Controller
[ 2.110076] usb usb1: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 2.110252] usb usb1: SerialNumber: 0000:00:02.1
[ 2.110526] usb usb1: uevent
[ 2.110626] usb usb1: usb_probe_device
[ 2.110630] usb usb1: configuration #1 chosen from 1 choice
[ 2.110842] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.110863] usb 1-0:1.0: uevent
[ 2.110928] hub 1-0:1.0: usb_probe_interface
[ 2.110931] hub 1-0:1.0: usb_probe_interface - got id
[ 2.110934] hub 1-0:1.0: USB hub found
[ 2.111153] hub 1-0:1.0: 6 ports detected
[ 2.111354] hub 1-0:1.0: standalone hub
[ 2.111356] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.111359] hub 1-0:1.0: individual port over-current protection
[ 2.111362] hub 1-0:1.0: power on to power good time: 20ms
[ 2.111375] hub 1-0:1.0: local power source is good
[ 2.111378] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.111412] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.111756] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
[ 2.112192] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
[ 2.112366] xen: registering gsi 20 triggering 0 polarity 1
[ 2.112366] alloc irq_desc for 20 on node 0
[ 2.112366] alloc kstat_irqs on node 0
[ 2.112420] xen: --> irq=20
[ 2.112423] xen_set_ioapic_routing: irq 20 gsi 20 vector 33 ioapic 0 pin 20 triggering 1 polarity 1
[ 2.112803] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
[ 2.113190] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 2.113194] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 2.113434] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 2.113538] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 2.113913] ehci_hcd 0000:00:04.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6
[ 2.113921] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0
[ 2.113925] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 2.113971] ehci_hcd 0000:00:04.1: park 0
[ 2.113976] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.113991] ehci_hcd 0000:00:04.1: debug port 1
[ 2.114197] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 2.114200] ehci_hcd 0000:00:04.1: supports USB remote wakeup
[ 2.114226] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
[ 2.114432] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.114440] ehci_hcd 0000:00:04.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 2.120016] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 2.120244] usb usb2: default language 0x0409
[ 2.120289] usb usb2: udev 1, busnum 2, minor = 128
[ 2.120292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.120498] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.120865] usb usb2: Product: EHCI Host Controller
[ 2.121066] usb usb2: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 2.121269] usb usb2: SerialNumber: 0000:00:04.1
[ 2.121517] usb usb2: uevent
[ 2.121586] usb usb2: usb_probe_device
[ 2.121590] usb usb2: configuration #1 chosen from 1 choice
[ 2.121828] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.121846] usb 2-0:1.0: uevent
[ 2.121912] hub 2-0:1.0: usb_probe_interface
[ 2.121916] hub 2-0:1.0: usb_probe_interface - got id
[ 2.121918] hub 2-0:1.0: USB hub found
[ 2.122136] hub 2-0:1.0: 6 ports detected
[ 2.122339] hub 2-0:1.0: standalone hub
[ 2.122341] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.122344] hub 2-0:1.0: individual port over-current protection
[ 2.122347] hub 2-0:1.0: power on to power good time: 20ms
[ 2.122360] hub 2-0:1.0: local power source is good
[ 2.122363] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.122410] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.122958] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 2.123191] xen: registering gsi 18 triggering 0 polarity 1
[ 2.123197] alloc irq_desc for 18 on node 0
[ 2.123200] alloc kstat_irqs on node 0
[ 2.123205] xen: --> irq=18
[ 2.123209] xen_set_ioapic_routing: irq 18 gsi 18 vector 41 ioapic 0 pin 18 triggering 1 polarity 1
[ 2.123351] ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 2.123351] ehci_hcd 0000:01:08.2: EHCI Host Controller
[ 2.124190] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 2.124303] ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 3
[ 2.124706] ehci_hcd 0000:01:08.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
[ 2.124710] ehci_hcd 0000:01:08.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024
[ 2.124765] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.124788] ehci_hcd 0000:01:08.2: MWI active
[ 2.124790] ehci_hcd 0000:01:08.2: supports USB remote wakeup
[ 2.124816] ehci_hcd 0000:01:08.2: irq 18, io mem 0xfdeff000
[ 2.125023] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.125029] ehci_hcd 0000:01:08.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 2.131016] ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00
[ 2.131244] usb usb3: default language 0x0409
[ 2.131262] usb usb3: udev 1, busnum 3, minor = 256
[ 2.131265] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.131498] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.131865] usb usb3: Product: EHCI Host Controller
[ 2.132252] usb usb3: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 2.132252] usb usb3: SerialNumber: 0000:01:08.2
[ 2.139992] usb usb3: uevent
[ 2.140066] usb usb3: usb_probe_device
[ 2.140069] usb usb3: configuration #1 chosen from 1 choice
[ 2.140286] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.140304] usb 3-0:1.0: uevent
[ 2.140370] hub 3-0:1.0: usb_probe_interface
[ 2.140373] hub 3-0:1.0: usb_probe_interface - got id
[ 2.140376] hub 3-0:1.0: USB hub found
[ 2.140596] hub 3-0:1.0: 4 ports detected
[ 2.140796] hub 3-0:1.0: standalone hub
[ 2.140798] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.140801] hub 3-0:1.0: individual port over-current protection
[ 2.140804] hub 3-0:1.0: power on to power good time: 20ms
[ 2.140811] hub 3-0:1.0: local power source is good
[ 2.140814] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.140846] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.141430] ACPI: PCI Interrupt Link [AE3D] enabled at IRQ 16
[ 2.141634] xen: registering gsi 16 triggering 0 polarity 1
[ 2.141637] xen_allocate_pirq: returning irq 16 for gsi 16
[ 2.141840] xen: --> irq=16
[ 2.141843] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 2.142218] ehci_hcd 0000:06:01.2: PCI INT C -> Link[AE3D] -> GSI 16 (level, low) -> IRQ 16
[ 2.142254] ehci_hcd 0000:06:01.2: EHCI Host Controller
[ 2.142846] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004'
[ 2.142951] ehci_hcd 0000:06:01.2: new USB bus registered, assigned bus number 4
[ 2.143328] ehci_hcd 0000:06:01.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5
[ 2.143338] ehci_hcd 0000:06:01.2: reset portroute 1 0 1 0 0
[ 2.143343] ehci_hcd 0000:06:01.2: reset hcc_params e806 thresh 0 uframes 256/512/1024 park
[ 2.143399] ehci_hcd 0000:06:01.2: park 0
[ 2.143405] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.143413] ehci_hcd 0000:06:01.2: ...powerup ports...
[ 2.164037] ehci_hcd 0000:06:01.2: MWI active
[ 2.164040] ehci_hcd 0000:06:01.2: supports USB remote wakeup
[ 2.164066] ehci_hcd 0000:06:01.2: irq 16, io mem 0xfd8fd000
[ 2.164274] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.164282] ehci_hcd 0000:06:01.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 2.170017] ehci_hcd 0000:06:01.2: USB 2.0 started, EHCI 1.00
[ 2.170285] usb usb4: default language 0x0409
[ 2.170296] usb usb4: udev 1, busnum 4, minor = 384
[ 2.170299] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.170506] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.170873] usb usb4: Product: EHCI Host Controller
[ 2.171074] usb usb4: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 2.171252] usb usb4: SerialNumber: 0000:06:01.2
[ 2.171530] usb usb4: uevent
[ 2.171628] usb usb4: usb_probe_device
[ 2.171632] usb usb4: configuration #1 chosen from 1 choice
[ 2.171843] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.171861] usb 4-0:1.0: uevent
[ 2.171927] hub 4-0:1.0: usb_probe_interface
[ 2.171930] hub 4-0:1.0: usb_probe_interface - got id
[ 2.171933] hub 4-0:1.0: USB hub found
[ 2.172152] hub 4-0:1.0: 5 ports detected
[ 2.172353] hub 4-0:1.0: standalone hub
[ 2.172356] hub 4-0:1.0: individual port power switching
[ 2.172358] hub 4-0:1.0: individual port over-current protection
[ 2.172361] hub 4-0:1.0: power on to power good time: 20ms
[ 2.172373] hub 4-0:1.0: local power source is good
[ 2.172376] hub 4-0:1.0: enabling power on all ports
[ 2.172415] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.172519] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.172725] ohci_hcd: block sizes: ed 80 td 96
[ 2.173299] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 2.173504] xen: registering gsi 23 triggering 0 polarity 1
[ 2.173507] xen_allocate_pirq: returning irq 23 for gsi 23
[ 2.173709] xen: --> irq=23
[ 2.173712] xen_set_ioapic_routing: irq 23 gsi 23 vector 184 ioapic 0 pin 23 triggering 1 polarity 1
[ 2.174087] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 2.174253] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.174253] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.174718] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005'
[ 2.174821] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 5
[ 2.175218] ohci_hcd 0000:00:02.0: created debug files
[ 2.175221] ohci_hcd 0000:00:02.0: supports USB remote wakeup
[ 2.175249] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 2.211034] ehci_hcd 0000:00:02.1: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[ 2.211039] hub 1-0:1.0: port 6: status 0501 change 0001
[ 2.222034] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 2.228020] ohci_hcd 0000:00:02.0: OHCI controller state
[ 2.228024] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
[ 2.228028] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 2.228032] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
[ 2.228036] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
[ 2.228040] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.228045] ohci_hcd 0000:00:02.0: hcca frame #0003
[ 2.228050] ohci_hcd 0000:00:02.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
[ 2.228054] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.228058] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
[ 2.228062] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
[ 2.228066] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
[ 2.228071] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
[ 2.228075] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
[ 2.228079] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
[ 2.228084] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
[ 2.228099] usb usb5: default language 0x0409
[ 2.228110] usb usb5: udev 1, busnum 5, minor = 512
[ 2.228112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.228252] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.228252] usb usb5: Product: OHCI Host Controller
[ 2.228252] usb usb5: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 2.228252] usb usb5: SerialNumber: 0000:00:02.0
[ 2.229366] usb usb5: uevent
[ 2.229437] usb usb5: usb_probe_device
[ 2.229441] usb usb5: configuration #1 chosen from 1 choice
[ 2.229651] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 2.229669] usb 5-0:1.0: uevent
[ 2.229734] hub 5-0:1.0: usb_probe_interface
[ 2.229737] hub 5-0:1.0: usb_probe_interface - got id
[ 2.229740] hub 5-0:1.0: USB hub found
[ 2.229987] hub 5-0:1.0: 6 ports detected
[ 2.230187] hub 5-0:1.0: standalone hub
[ 2.230189] hub 5-0:1.0: no power switching (usb 1.0)
[ 2.230192] hub 5-0:1.0: global over-current protection
[ 2.230195] hub 5-0:1.0: power on to power good time: 2ms
[ 2.230201] hub 5-0:1.0: local power source is good
[ 2.230204] hub 5-0:1.0: no over-current condition exists
[ 2.230207] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 2.230233] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.230784] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22
[ 2.230989] xen: registering gsi 22 triggering 0 polarity 1
[ 2.230992] xen_allocate_pirq: returning irq 22 for gsi 22
[ 2.231222] xen: --> irq=22
[ 2.231225] xen_set_ioapic_routing: irq 22 gsi 22 vector 208 ioapic 0 pin 22 triggering 1 polarity 1
[ 2.231253] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 22 (level, low) -> IRQ 22
[ 2.231253] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 2.231253] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 2.232205] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006'
[ 2.232314] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 6
[ 2.232739] ohci_hcd 0000:00:04.0: created debug files
[ 2.232741] ohci_hcd 0000:00:04.0: supports USB remote wakeup
[ 2.232767] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000
[ 2.240021] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 2.240026] hub 3-0:1.0: port 1: status 0501 change 0001
[ 2.272026] ehci_hcd 0000:06:01.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
[ 2.272031] hub 4-0:1.0: port 3: status 0501 change 0001
[ 2.272041] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
[ 2.272045] hub 4-0:1.0: port 4: status 0501 change 0001
[ 2.285020] ohci_hcd 0000:00:04.0: OHCI controller state
[ 2.285023] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
[ 2.285028] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 2.285031] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
[ 2.285035] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
[ 2.285039] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.285045] ohci_hcd 0000:00:04.0: hcca frame #0003
[ 2.285049] ohci_hcd 0000:00:04.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
[ 2.285053] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.285057] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
[ 2.285062] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
[ 2.285066] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
[ 2.285070] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
[ 2.285075] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS
[ 2.285079] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS
[ 2.285083] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS
[ 2.285098] usb usb6: default language 0x0409
[ 2.285109] usb usb6: udev 1, busnum 6, minor = 640
[ 2.285112] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.285252] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.285252] usb usb6: Product: OHCI Host Controller
[ 2.285252] usb usb6: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 2.285252] usb usb6: SerialNumber: 0000:00:04.0
[ 2.286366] usb usb6: uevent
[ 2.286437] usb usb6: usb_probe_device
[ 2.286440] usb usb6: configuration #1 chosen from 1 choice
[ 2.286677] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 2.286695] usb 6-0:1.0: uevent
[ 2.286760] hub 6-0:1.0: usb_probe_interface
[ 2.286763] hub 6-0:1.0: usb_probe_interface - got id
[ 2.286766] hub 6-0:1.0: USB hub found
[ 2.286985] hub 6-0:1.0: 6 ports detected
[ 2.287185] hub 6-0:1.0: standalone hub
[ 2.287188] hub 6-0:1.0: no power switching (usb 1.0)
[ 2.287191] hub 6-0:1.0: global over-current protection
[ 2.287193] hub 6-0:1.0: power on to power good time: 2ms
[ 2.287200] hub 6-0:1.0: local power source is good
[ 2.287203] hub 6-0:1.0: no over-current condition exists
[ 2.287206] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 2.287233] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.287795] ACPI: PCI Interrupt Link [AE3B] enabled at IRQ 16
[ 2.288001] xen: registering gsi 16 triggering 0 polarity 1
[ 2.288005] xen_allocate_pirq: returning irq 16 for gsi 16
[ 2.288234] xen: --> irq=16
[ 2.288238] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 2.288253] ohci_hcd 0000:06:01.0: PCI INT A -> Link[AE3B] -> GSI 16 (level, low) -> IRQ 16
[ 2.288253] ohci_hcd 0000:06:01.0: OHCI Host Controller
[ 2.289228] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007'
[ 2.289335] ohci_hcd 0000:06:01.0: new USB bus registered, assigned bus number 7
[ 2.289737] ohci_hcd 0000:06:01.0: enabled NEC chipset lost interrupt quirk
[ 2.289770] ohci_hcd 0000:06:01.0: created debug files
[ 2.289773] ohci_hcd 0000:06:01.0: supports USB remote wakeup
[ 2.289782] ohci_hcd 0000:06:01.0: irq 16, io mem 0xfd8ff000
[ 2.311025] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 2.311034] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 2.311044] ehci_hcd 0000:00:02.1: port 6 low speed --> companion
[ 2.330028] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00010301 CSC LSDA PPS CCS
[ 2.330033] hub 5-0:1.0: port 6: status 0301 change 0001
[ 2.370023] ehci_hcd 0000:00:02.1: GetStatus port 6 status 003402 POWER OWNER sig=k CSC
[ 2.370032] ohci_hcd 0000:06:01.0: OHCI controller state
[ 2.370037] ohci_hcd 0000:06:01.0: OHCI 1.0, NO legacy support registers
[ 2.370042] ohci_hcd 0000:06:01.0: control 0x283 RWC HCFS=operational CBSR=3
[ 2.370047] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 2.370049] ohci_hcd 0000:06:01.0: cmdstatus 0x00000 SOC=0
[ 2.370054] ohci_hcd 0000:06:01.0: intrstatus 0x00000004 SF
[ 2.370059] ohci_hcd 0000:06:01.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.370062] hub 3-0:1.0: state 7 ports 4 chg 0002 evt 0000
[ 2.370069] hub 3-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.370074] ohci_hcd 0000:06:01.0: hcca frame #001f
[ 2.370080] ohci_hcd 0000:06:01.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3)
[ 2.370084] ohci_hcd 0000:06:01.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.370089] ohci_hcd 0000:06:01.0: roothub.status 00008000 DRWE
[ 2.370094] ohci_hcd 0000:06:01.0: roothub.portstatus [0] 0x00000100 PPS
[ 2.370099] ohci_hcd 0000:06:01.0: roothub.portstatus [1] 0x00000100 PPS
[ 2.370104] ohci_hcd 0000:06:01.0: roothub.portstatus [2] 0x00000100 PPS
[ 2.370120] usb usb7: default language 0x0409
[ 2.370131] usb usb7: udev 1, busnum 7, minor = 768
[ 2.370134] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.370252] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.370252] usb usb7: Product: OHCI Host Controller
[ 2.370252] usb usb7: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 2.370252] usb usb7: SerialNumber: 0000:06:01.0
[ 2.371389] usb usb7: uevent
[ 2.371459] usb usb7: usb_probe_device
[ 2.371462] usb usb7: configuration #1 chosen from 1 choice
[ 2.371673] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 2.371691] usb 7-0:1.0: uevent
[ 2.371754] hub 7-0:1.0: usb_probe_interface
[ 2.371757] hub 7-0:1.0: usb_probe_interface - got id
[ 2.371760] hub 7-0:1.0: USB hub found
[ 2.371982] hub 7-0:1.0: 3 ports detected
[ 2.372182] hub 7-0:1.0: standalone hub
[ 2.372184] hub 7-0:1.0: no power switching (usb 1.0)
[ 2.372187] hub 7-0:1.0: global over-current protection
[ 2.372190] hub 7-0:1.0: power on to power good time: 30ms
[ 2.372197] hub 7-0:1.0: local power source is good
[ 2.372200] hub 7-0:1.0: no over-current condition exists
[ 2.372204] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 2.372225] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.372822] ACPI: PCI Interrupt Link [AE3C] enabled at IRQ 16
[ 2.373028] xen: registering gsi 16 triggering 0 polarity 1
[ 2.373031] xen_allocate_pirq: returning irq 16 for gsi 16
[ 2.373233] xen: --> irq=16
[ 2.373236] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 2.373257] ohci_hcd 0000:06:01.1: PCI INT B -> Link[AE3C] -> GSI 16 (level, low) -> IRQ 16
[ 2.373257] ohci_hcd 0000:06:01.1: OHCI Host Controller
[ 2.374255] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008'
[ 2.374360] ohci_hcd 0000:06:01.1: new USB bus registered, assigned bus number 8
[ 2.374732] ohci_hcd 0000:06:01.1: enabled NEC chipset lost interrupt quirk
[ 2.374761] ohci_hcd 0000:06:01.1: created debug files
[ 2.374764] ohci_hcd 0000:06:01.1: supports USB remote wakeup
[ 2.374773] ohci_hcd 0000:06:01.1: irq 16, io mem 0xfd8fe000
[ 2.420314] ehci_hcd 0000:01:08.2: port 1 high speed
[ 2.420319] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 2.455077] ohci_hcd 0000:06:01.1: OHCI controller state
[ 2.455082] ohci_hcd 0000:06:01.1: OHCI 1.0, NO legacy support registers
[ 2.455088] ohci_hcd 0000:06:01.1: control 0x283 RWC HCFS=operational CBSR=3
[ 2.455092] ohci_hcd 0000:06:01.1: cmdstatus 0x00000 SOC=0
[ 2.455097] ohci_hcd 0000:06:01.1: intrstatus 0x00000004 SF
[ 2.455102] ohci_hcd 0000:06:01.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.455113] ohci_hcd 0000:06:01.1: hcca frame #001f
[ 2.455118] ohci_hcd 0000:06:01.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2)
[ 2.455122] ohci_hcd 0000:06:01.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.455127] ohci_hcd 0000:06:01.1: roothub.status 00008000 DRWE
[ 2.455132] ohci_hcd 0000:06:01.1: roothub.portstatus [0] 0x00000100 PPS
[ 2.455137] ohci_hcd 0000:06:01.1: roothub.portstatus [1] 0x00000100 PPS
[ 2.455171] usb usb8: default language 0x0409
[ 2.455183] usb usb8: udev 1, busnum 8, minor = 896
[ 2.455186] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.455402] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.455770] usb usb8: Product: OHCI Host Controller
[ 2.455997] usb usb8: Manufacturer: Linux 2.6.31.6 ohci_hcd
[ 2.456149] usb usb8: SerialNumber: 0000:06:01.1
[ 2.456467] usb usb8: uevent
[ 2.456549] usb usb8: usb_probe_device
[ 2.456553] usb usb8: configuration #1 chosen from 1 choice
[ 2.456764] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 2.456787] usb 8-0:1.0: uevent
[ 2.456859] hub 8-0:1.0: usb_probe_interface
[ 2.456862] hub 8-0:1.0: usb_probe_interface - got id
[ 2.456865] hub 8-0:1.0: USB hub found
[ 2.457110] hub 8-0:1.0: 2 ports detected
[ 2.457337] hub 8-0:1.0: standalone hub
[ 2.457339] hub 8-0:1.0: no power switching (usb 1.0)
[ 2.457342] hub 8-0:1.0: global over-current protection
[ 2.457345] hub 8-0:1.0: power on to power good time: 30ms
[ 2.457353] hub 8-0:1.0: local power source is good
[ 2.457356] hub 8-0:1.0: no over-current condition exists
[ 2.457359] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 2.457382] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.457514] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.458405] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 2.458628] xen: registering gsi 16 triggering 0 polarity 1
[ 2.458632] xen_allocate_pirq: returning irq 16 for gsi 16
[ 2.458834] xen: --> irq=16
[ 2.458838] xen_set_ioapic_routing: irq 16 gsi 16 vector 144 ioapic 0 pin 16 triggering 1 polarity 1
[ 2.459004] uhci_hcd 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 2.459004] uhci_hcd 0000:01:08.0: UHCI Host Controller
[ 2.468346] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '009'
[ 2.468451] uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 9
[ 2.476683] uhci_hcd 0000:01:08.0: detected 2 ports
[ 2.480819] uhci_hcd 0000:01:08.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.480822] uhci_hcd 0000:01:08.0: Performing full reset
[ 2.480841] uhci_hcd 0000:01:08.0: supports USB remote wakeup
[ 2.480856] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 2.487772] uhci_hcd 0000:01:08.0: irq 16, io base 0x0000ec00
[ 2.494792] usb usb9: default language 0x0409
[ 2.494804] usb usb9: udev 1, busnum 9, minor = 1024
[ 2.494806] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.495733] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.495733] usb usb9: Product: UHCI Host Controller
[ 2.495733] usb usb9: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 2.495733] usb usb9: SerialNumber: 0000:01:08.0
[ 2.523867] usb usb9: uevent
[ 2.523940] usb usb9: usb_probe_device
[ 2.523944] usb usb9: configuration #1 chosen from 1 choice
[ 2.527972] usb usb9: adding 9-0:1.0 (config #1, interface 0)
[ 2.527991] usb 9-0:1.0: uevent
[ 2.528062] hub 9-0:1.0: usb_probe_interface
[ 2.528065] hub 9-0:1.0: usb_probe_interface - got id
[ 2.528068] hub 9-0:1.0: USB hub found
[ 2.532140] hub 9-0:1.0: 2 ports detected
[ 2.533132] hub 9-0:1.0: standalone hub
[ 2.533132] hub 9-0:1.0: no power switching (usb 1.0)
[ 2.533132] hub 9-0:1.0: individual port over-current protection
[ 2.533132] hub 9-0:1.0: power on to power good time: 2ms
[ 2.536296] hub 9-0:1.0: local power source is good
[ 2.536299] hub 9-0:1.0: trying to enable port power on non-switchable hub
[ 2.536324] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.536881] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 2.537288] xen: registering gsi 17 triggering 0 polarity 1
[ 2.537288] alloc irq_desc for 17 on node 0
[ 2.537288] alloc kstat_irqs on node 0
[ 2.543234] xen: --> irq=17
[ 2.543238] xen_set_ioapic_routing: irq 17 gsi 17 vector 49 ioapic 0 pin 17 triggering 1 polarity 1
[ 2.544228] uhci_hcd 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 2.544228] uhci_hcd 0000:01:08.1: UHCI Host Controller
[ 2.565413] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '010'
[ 2.565706] ehci_hcd 0000:01:08.2: port 1 high speed
[ 2.565711] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 2.565823] uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 10
[ 2.573732] uhci_hcd 0000:01:08.1: detected 2 ports
[ 2.577884] uhci_hcd 0000:01:08.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.577887] uhci_hcd 0000:01:08.1: Performing full reset
[ 2.577910] uhci_hcd 0000:01:08.1: supports USB remote wakeup
[ 2.577938] uhci_hcd 0000:01:08.1: irq 17, io base 0x0000e800
[ 2.584895] usb usb10: default language 0x0409
[ 2.584906] usb usb10: udev 1, busnum 10, minor = 1152
[ 2.584909] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.585835] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.585835] usb usb10: Product: UHCI Host Controller
[ 2.585835] usb usb10: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 2.585835] usb usb10: SerialNumber: 0000:01:08.1
[ 2.613981] usb usb10: uevent
[ 2.614057] usb usb10: usb_probe_device
[ 2.614060] usb usb10: configuration #1 chosen from 1 choice
[ 2.619507] usb usb10: adding 10-0:1.0 (config #1, interface 0)
[ 2.619527] usb 10-0:1.0: uevent
[ 2.619597] hub 10-0:1.0: usb_probe_interface
[ 2.619600] hub 10-0:1.0: usb_probe_interface - got id
[ 2.619603] hub 10-0:1.0: USB hub found
[ 2.622295] hub 10-0:1.0: 2 ports detected
[ 2.623267] hub 10-0:1.0: standalone hub
[ 2.623267] hub 10-0:1.0: no power switching (usb 1.0)
[ 2.623267] hub 10-0:1.0: individual port over-current protection
[ 2.623267] hub 10-0:1.0: power on to power good time: 2ms
[ 2.626443] hub 10-0:1.0: local power source is good
[ 2.626446] hub 10-0:1.0: trying to enable port power on non-switchable hub
[ 2.626467] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 2.626660] usbcore: registered new interface driver usblp
[ 2.627651] Initializing USB Mass Storage driver...
[ 2.637581] uhci_hcd 0000:01:08.0: port 1 portsc 008a,00
[ 2.637600] uhci_hcd 0000:01:08.0: port 2 portsc 008a,00
[ 2.637619] usbcore: registered new interface driver usb-storage
[ 2.638551] USB Mass Storage support registered.
[ 2.648692] usbcore: registered new interface driver libusual
[ 2.654451] PNP: No PS/2 controller found. Probing ports directly.
[ 2.661487] usb 3-1: default language 0x0409
[ 2.661632] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.664255] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.670815] usb 3-1: udev 2, busnum 3, minor = 257
[ 2.670818] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.671793] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.671793] usb 3-1: Product: USB2.0 Hub
[ 2.688892] usb 3-1: uevent
[ 2.689037] usb 3-1: usb_probe_device
[ 2.689041] usb 3-1: configuration #1 chosen from 1 choice
[ 2.693077] mice: PS/2 mouse device common for all mice
[ 2.698557] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 2.698576] usb 3-1:1.0: uevent
[ 2.698645] hub 3-1:1.0: usb_probe_interface
[ 2.698648] hub 3-1:1.0: usb_probe_interface - got id
[ 2.698651] hub 3-1:1.0: USB hub found
[ 2.702990] hub 3-1:1.0: 4 ports detected
[ 2.703963] hub 3-1:1.0: standalone hub
[ 2.703963] hub 3-1:1.0: ganged power switching
[ 2.703963] hub 3-1:1.0: global over-current protection
[ 2.703963] hub 3-1:1.0: Single TT
[ 2.703963] hub 3-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 2.703963] hub 3-1:1.0: Port indicators are supported
[ 2.703963] hub 3-1:1.0: power on to power good time: 100ms
[ 2.707034] rtc_cmos 00:05: RTC can wake from S4
[ 2.712414] hub 3-1:1.0: local power source is good
[ 2.712417] hub 3-1:1.0: no over-current condition exists
[ 2.712421] hub 3-1:1.0: enabling power on all ports
[ 2.712515] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.718012] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 2.725487] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.733228] uhci_hcd 0000:01:08.1: port 1 portsc 008a,00
[ 2.733247] uhci_hcd 0000:01:08.1: port 2 portsc 008a,00
[ 2.733283] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 2.733311] hub 4-0:1.0: state 7 ports 5 chg 0018 evt 0000
[ 2.733320] hub 4-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 2.733331] ehci_hcd 0000:06:01.2: port 3 low speed --> companion
[ 2.733547] cpuidle: using governor ladder
[ 2.734536] cpuidle: using governor menu
[ 2.742160] usbcore: registered new interface driver hiddev
[ 2.745731] usbcore: registered new interface driver usbhid
[ 2.746725] usbhid: v2.6:USB HID core driver
[ 2.757069] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 2.766680] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 2.767009] xen: registering gsi 21 triggering 0 polarity 1
[ 2.767009] xen_allocate_pirq: returning irq 21 for gsi 21
[ 2.767009] xen: --> irq=21
[ 2.767009] xen_set_ioapic_routing: irq 21 gsi 21 vector 216 ioapic 0 pin 21 triggering 1 polarity 1
[ 2.767009] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 2.767009] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 2.809673] ehci_hcd 0000:06:01.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC
[ 2.809704] hub 4-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 2.834249] hub 3-1:1.0: port 4: status 0101 change 0001
[ 2.860174] ehci_hcd 0000:06:01.2: port 4 high speed
[ 2.860179] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 2.911018] usb 4-4: new high speed USB device using ehci_hcd and address 3
[ 2.934018] usb 3-1: link qh256-0001/ffff88002e8f4180 start 1 [1/0 us]
[ 2.963178] ehci_hcd 0000:06:01.2: port 4 high speed
[ 2.963182] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
[ 3.027381] usb 4-4: udev 3, busnum 4, minor = 386
[ 3.027384] usb 4-4: New USB device found, idVendor=eb1a, idProduct=2860
[ 3.028350] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.035298] usb 4-4: uevent
[ 3.035401] usb 4-4: usb_probe_device
[ 3.035405] usb 4-4: configuration #1 chosen from 1 choice
[ 3.035749] usb 4-4: adding 4-4:1.0 (config #1, interface 0)
[ 3.035768] usb 4-4:1.0: uevent
[ 3.035879] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 3.035906] hub 6-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 3.035912] hub 5-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 3.035921] hub 5-0:1.0: port 6, status 0301, change 0000, 1.5 Mb/s
[ 3.141021] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
[ 3.191253] ALSA device list:
[ 3.191460] #0: HDA NVidia at 0xfe020000 irq 21
[ 3.191723] Netfilter messages via NETLINK v0.30.
[ 3.191944] nf_conntrack version 0.5.0 (6144 buckets, 24576 max)
[ 3.192234] usb 5-6: new low speed USB device using ohci_hcd and address 2
[ 3.192712] ctnetlink v0.93: registering with nfnetlink.
[ 3.193551] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.193783] TCP cubic registered
[ 3.193981] Initializing XFRM netlink socket
[ 3.194609] NET: Registered protocol family 10
[ 3.196232] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.196524] IPv6 over IPv4 tunneling driver
[ 3.197486] NET: Registered protocol family 17
[ 3.197984] RPC: Registered udp transport module.
[ 3.198187] RPC: Registered tcp transport module.
[ 3.198701] PM: Resume from disk failed.
[ 3.198721] registered taskstats version 1
[ 3.199141] Magic number: 5:72:576
[ 3.199542] Freeing unused kernel memory: 528k freed
[ 3.199993] Write protecting the kernel read-only data: 8312k
[ 3.300048] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
[ 3.375077] usb 5-6: skipped 1 descriptor after interface
[ 3.375085] usb 5-6: skipped 1 descriptor after interface
[ 3.378052] usb 5-6: default language 0x0409
[ 3.384033] usb 5-6: udev 2, busnum 5, minor = 513
[ 3.384036] usb 5-6: New USB device found, idVendor=046d, idProduct=c517
[ 3.384407] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.384612] usb 5-6: Product: USB Receiver
[ 3.384811] usb 5-6: Manufacturer: Logitech
[ 3.385137] usb 5-6: uevent
[ 3.385155] usb 5-6: usb_probe_device
[ 3.385159] usb 5-6: configuration #1 chosen from 1 choice
[ 3.387036] usb 5-6: adding 5-6:1.0 (config #1, interface 0)
[ 3.387055] usb 5-6:1.0: uevent
[ 3.387077] usbhid 5-6:1.0: usb_probe_interface
[ 3.387080] usbhid 5-6:1.0: usb_probe_interface - got id
[ 3.407465] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.0/input/input3
[ 3.407931] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-6/input0
[ 3.408346] usb 5-6: adding 5-6:1.1 (config #1, interface 1)
[ 3.408376] usb 5-6:1.1: uevent
[ 3.408398] usbhid 5-6:1.1: usb_probe_interface
[ 3.408401] usbhid 5-6:1.1: usb_probe_interface - got id
[ 3.413295] usb usb5: uevent
[ 3.413325] usb 5-0:1.0: uevent
[ 3.413407] usb usb1: uevent
[ 3.413435] usb 1-0:1.0: uevent
[ 3.413517] usb usb6: uevent
[ 3.413545] usb 6-0:1.0: uevent
[ 3.413624] usb usb2: uevent
[ 3.413652] usb 2-0:1.0: uevent
[ 3.414394] usb usb9: uevent
[ 3.414423] usb 9-0:1.0: uevent
[ 3.414505] usb usb10: uevent
[ 3.414534] usb 10-0:1.0: uevent
[ 3.414616] usb usb3: uevent
[ 3.414645] usb 3-0:1.0: uevent
[ 3.414677] usb 3-1: uevent
[ 3.414709] usb 3-1:1.0: uevent
[ 3.415760] usb usb7: uevent
[ 3.415790] usb 7-0:1.0: uevent
[ 3.415875] usb usb8: uevent
[ 3.415905] usb 8-0:1.0: uevent
[ 3.415992] usb usb4: uevent
[ 3.416021] usb 4-0:1.0: uevent
[ 3.416055] usb 4-4: uevent
[ 3.416085] usb 4-4:1.0: uevent
[ 3.417036] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 3.418220] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.1/input/input4
[ 3.418666] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96
[ 3.418742] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6/input1
[ 3.419147] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 3.419178] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004
[ 3.419187] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 3.419195] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 3.454284] ohci_hcd 0000:00:04.0: auto-stop root hub
[ 3.523054] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 3.630053] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 3.681032] usb 7-2: new low speed USB device using ohci_hcd and address 2
[ 3.705026] ohci_hcd 0000:06:01.1: auto-stop root hub
[ 3.790063] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 3.863766] usb 7-2: skipped 1 descriptor after interface
[ 3.866762] usb 7-2: default language 0x0409
[ 3.874759] usb 7-2: udev 2, busnum 7, minor = 769
[ 3.874764] usb 7-2: New USB device found, idVendor=10cf, idProduct=5500
[ 3.874980] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.875011] usb 7-2: Product: USB K8055
[ 3.875011] usb 7-2: Manufacturer: Velleman
[ 3.875725] usb 7-2: uevent
[ 3.875744] usb 7-2: usb_probe_device
[ 3.875748] usb 7-2: configuration #1 chosen from 1 choice
[ 3.880769] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
[ 3.880823] usb 7-2:1.0: uevent
[ 3.880852] usbhid 7-2:1.0: usb_probe_interface
[ 3.880855] usbhid 7-2:1.0: usb_probe_interface - got id
[ 3.886722] ohci_hcd 0000:06:01.0: urb ffff880001de3780 path 2 ep0in 5ed60000 cc 5 --> status -62
[ 3.893945] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96
[ 3.894072] generic-usb 0003:10CF:5500.0003: hiddev97,hidraw2: USB HID v1.00 Device [Velleman USB K8055] on usb-0000:06:01.0-2/input0
[ 3.894515] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 3.894545] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.894552] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0008
[ 3.894564] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.894569] hub 10-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.894574] hub 3-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 3.894919] hub 3-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 3.955035] usb usb9: suspend_rh (auto-stop)
[ 3.955063] usb usb10: suspend_rh (auto-stop)
[ 3.959439] usb 3-1.4: new high speed USB device using ehci_hcd and address 3
[ 4.036403] usb 3-1.4: skipped 4 descriptors after interface
[ 4.036407] usb 3-1.4: skipped 2 descriptors after interface
[ 4.036411] usb 3-1.4: skipped 1 descriptor after endpoint
[ 4.036414] usb 3-1.4: skipped 2 descriptors after interface
[ 4.036417] usb 3-1.4: skipped 1 descriptor after endpoint
[ 4.036420] usb 3-1.4: skipped 2 descriptors after interface
[ 4.036423] usb 3-1.4: skipped 1 descriptor after endpoint
[ 4.036426] usb 3-1.4: skipped 2 descriptors after interface
[ 4.036429] usb 3-1.4: skipped 1 descriptor after endpoint
[ 4.036432] usb 3-1.4: skipped 2 descriptors after interface
[ 4.036437] usb 3-1.4: skipped 1 descriptor after endpoint
[ 4.036552] usb 3-1.4: default language 0x0409
[ 4.043421] usb 3-1.4: udev 3, busnum 3, minor = 258
[ 4.043425] usb 3-1.4: New USB device found, idVendor=2304, idProduct=0208
[ 4.043643] usb 3-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 4.044009] usb 3-1.4: Product: PCTV USB2 PAL
[ 4.044009] usb 3-1.4: Manufacturer: Pinnacle Systems GmbH
[ 4.044545] usb 3-1.4: uevent
[ 4.044570] usb 3-1.4: usb_probe_device
[ 4.044574] usb 3-1.4: configuration #1 chosen from 1 choice
[ 4.044900] usb 3-1.4: adding 3-1.4:1.0 (config #1, interface 0)
[ 4.044923] usb 3-1.4:1.0: uevent
[ 4.044977] usb 3-1.4: adding 3-1.4:1.1 (config #1, interface 1)
[ 4.044995] usb 3-1.4:1.1: uevent
[ 4.045033] usb 3-1.4: adding 3-1.4:1.2 (config #1, interface 2)
[ 4.045052] usb 3-1.4:1.2: uevent
[ 4.045069] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 4.045096] hub 5-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 4.045106] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004
[ 4.045113] hub 3-1:1.0: state 7 ports 4 chg 0000 evt 0010
[ 4.530046] PM: Starting manual resume from disk
[ 4.530256] PM: Resume from partition 252:1
[ 4.530256] PM: Checking hibernation image.
[ 4.550840] PM: Resume from disk failed.
[ 4.575871] kjournald starting. Commit interval 5 seconds
[ 4.575884] EXT3-fs: mounted filesystem with journal data mode.
[ 4.701024] hub 2-0:1.0: hub_suspend
[ 4.701035] usb usb2: bus auto-suspend
[ 4.701038] ehci_hcd 0000:00:04.1: suspend root hub
[ 4.704031] hub 1-0:1.0: hub_suspend
[ 4.704040] usb usb1: bus auto-suspend
[ 4.704044] ehci_hcd 0000:00:02.1: suspend root hub
[ 5.471101] udevd version 125 started
[ 5.613729] usb usb5: uevent
[ 5.613760] usb 5-0:1.0: uevent
[ 5.613793] usb 5-6: uevent
[ 5.613824] usb 5-6:1.0: uevent
[ 5.613999] usb 5-6:1.1: uevent
[ 5.614339] usb usb1: uevent
[ 5.614370] usb 1-0:1.0: uevent
[ 5.614455] usb usb6: uevent
[ 5.614491] usb 6-0:1.0: uevent
[ 5.614586] usb usb2: uevent
[ 5.614618] usb 2-0:1.0: uevent
[ 5.615252] usb usb9: uevent
[ 5.615282] usb 9-0:1.0: uevent
[ 5.615367] usb usb10: uevent
[ 5.615397] usb 10-0:1.0: uevent
[ 5.615484] usb usb3: uevent
[ 5.615513] usb 3-0:1.0: uevent
[ 5.615546] usb 3-1: uevent
[ 5.615592] usb 3-1.4: uevent
[ 5.615634] usb 3-1.4:1.0: uevent
[ 5.615671] usb 3-1.4:1.1: uevent
[ 5.615704] usb 3-1.4:1.2: uevent
[ 5.615736] usb 3-1:1.0: uevent
[ 5.616831] usb usb7: uevent
[ 5.616863] usb 7-0:1.0: uevent
[ 5.616897] usb 7-2: uevent
[ 5.616928] usb 7-2:1.0: uevent
[ 5.617122] usb usb8: uevent
[ 5.617152] usb 8-0:1.0: uevent
[ 5.617239] usb usb4: uevent
[ 5.617269] usb 4-0:1.0: uevent
[ 5.617303] usb 4-4: uevent
[ 5.617334] usb 4-4:1.0: uevent
[ 5.704036] hub 6-0:1.0: hub_suspend
[ 5.704047] usb usb6: bus auto-suspend
[ 5.704051] ohci_hcd 0000:00:04.0: suspend root hub
[ 6.598299] ata1.00: configured for UDMA/133
[ 6.598694] ata1: EH complete
[ 6.705050] hub 8-0:1.0: hub_suspend
[ 6.705062] usb usb8: bus auto-suspend
[ 6.705067] ohci_hcd 0000:06:01.1: suspend root hub
[ 6.705074] hub 9-0:1.0: hub_suspend
[ 6.705078] usb usb9: bus auto-suspend
[ 6.705081] usb usb9: suspend_rh
[ 6.705102] hub 10-0:1.0: hub_suspend
[ 6.705106] usb usb10: bus auto-suspend
[ 6.705109] usb usb10: suspend_rh
[ 7.522262] ata1.00: configured for UDMA/133
[ 7.522317] ata1: EH complete
[ 8.715281] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 8.721239] EXT3 FS on dm-0, internal journal
[ 12.745867] kjournald starting. Commit interval 5 seconds
[ 12.756309] EXT3 FS on sda1, internal journal
[ 12.756582] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.804790] kjournald starting. Commit interval 5 seconds
[ 12.813035] EXT3 FS on dm-2, internal journal
[ 12.813304] EXT3-fs: recovery complete.
[ 12.821382] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.848012] kjournald starting. Commit interval 5 seconds
[ 12.854225] EXT3 FS on dm-3, internal journal
[ 12.854495] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.883571] kjournald starting. Commit interval 5 seconds
[ 12.894568] EXT3 FS on dm-4, internal journal
[ 12.894837] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.924184] kjournald starting. Commit interval 5 seconds
[ 12.931535] EXT3 FS on dm-5, internal journal
[ 12.931805] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.952940] kjournald starting. Commit interval 5 seconds
[ 12.964211] EXT3 FS on dm-6, internal journal
[ 12.964482] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.999510] kjournald starting. Commit interval 5 seconds
[ 13.005859] EXT3 FS on dm-9, internal journal
[ 13.006128] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.028406] kjournald starting. Commit interval 5 seconds
[ 13.041155] EXT3 FS on dm-7, internal journal
[ 13.041425] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.071791] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k
[ 14.824792] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 14.935153] alloc irq_desc for 405 on node 0
[ 14.935156] alloc kstat_irqs on node 0
[ 16.256086] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 16.256091] 0000:07:00.0: eth1: 10/100 speed: disabling TSO
[ 16.256343] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 17.167614] eth1: IPv6 duplicate address detected!
[ 22.142232] alloc irq_desc for 404 on node 0
[ 22.142237] alloc kstat_irqs on node 0
[ 22.142315] xenbus_probe wake_waiting
[ 22.142318] alloc irq_desc for 403 on node 0
[ 22.142321] alloc kstat_irqs on node 0
[ 22.143050] xenbus_probe wake_waiting
[ 22.156769] XENBUS: Unable to read cpu state
[ 22.157172] XENBUS: Unable to read cpu state
[ 22.157690] xenbus_probe_devices backend
[ 22.159099] xenbus_probe_devices failed xenbus_directory
[ 22.159303] backend_probe_and_watch devices probed ok
[ 22.159650] backend_probe_and_watch watch add ok ok
[ 22.159879] backend_probe_and_watch all done
[ 22.160004] xenbus_probe_devices device
[ 22.161909] xenbus_probe_devices failed xenbus_directory
[ 22.162015] frontend_probe_and_watch devices probed ok
[ 22.162524] frontend_probe_and_watch watch add ok ok
[ 22.162753] frontend_probe_and_watch all done
[ 24.707009] xen_bridge: no IPv6 routers present
[ 24.712008] vpn_bridge: no IPv6 routers present
[ 25.703008] eth0: no IPv6 routers present
[ 37.102445] alloc irq_desc for 402 on node 0
[ 37.102450] alloc kstat_irqs on node 0
[ 37.227345] alloc irq_desc for 401 on node 0
[ 37.227349] alloc kstat_irqs on node 0
[ 37.382818] device vif7.0 entered promiscuous mode
[ 37.405252] xen_bridge: port 1(vif7.0) entering learning state
[ 38.735532] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 38.735779] alloc irq_desc for 400 on node 0
[ 38.735782] alloc kstat_irqs on node 0
[ 38.742213] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 38.742446] alloc irq_desc for 399 on node 0
[ 38.742449] alloc kstat_irqs on node 0
[ 44.938467] alloc irq_desc for 398 on node 0
[ 44.938472] alloc kstat_irqs on node 0
[ 45.093242] alloc irq_desc for 397 on node 0
[ 45.093247] alloc kstat_irqs on node 0
[ 45.202269] frontend_changed: backend/vbd/7/2049: prepare for reconnect
[ 45.208102] frontend_changed: backend/vbd/7/2050: prepare for reconnect
[ 45.417628] device vif8.0 entered promiscuous mode
[ 45.419752] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 45.432039] xen_bridge: port 2(vif8.0) entering learning state
[ 45.433847] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 45.442477] alloc irq_desc for 396 on node 0
[ 45.442481] alloc kstat_irqs on node 0
[ 47.121244] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 47.121522] alloc irq_desc for 395 on node 0
[ 47.121526] alloc kstat_irqs on node 0
[ 47.144550] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 47.144805] alloc irq_desc for 394 on node 0
[ 47.144808] alloc kstat_irqs on node 0
[ 48.335010] vif7.0: no IPv6 routers present
[ 52.406012] xen_bridge: port 1(vif7.0) entering forwarding state
[ 53.109043] alloc irq_desc for 393 on node 0
[ 53.109048] alloc kstat_irqs on node 0
[ 53.260085] frontend_changed: backend/vbd/8/2049: prepare for reconnect
[ 53.272968] frontend_changed: backend/vbd/8/2050: prepare for reconnect
[ 53.545577] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 53.586296] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 53.586549] alloc irq_desc for 392 on node 0
[ 53.586554] alloc kstat_irqs on node 0
[ 53.768996] device vif9.0 entered promiscuous mode
[ 53.772943] xen_bridge: port 3(vif9.0) entering learning state
[ 54.087825] alloc irq_desc for 391 on node 0
[ 54.087829] alloc kstat_irqs on node 0
[ 55.792514] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 55.792760] alloc irq_desc for 390 on node 0
[ 55.792764] alloc kstat_irqs on node 0
[ 55.804651] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 55.804897] alloc irq_desc for 389 on node 0
[ 55.804901] alloc kstat_irqs on node 0
[ 56.132390] vif8.0: no IPv6 routers present
[ 60.433011] xen_bridge: port 2(vif8.0) entering forwarding state
[ 62.268736] alloc irq_desc for 388 on node 0
[ 62.268741] alloc kstat_irqs on node 0
[ 62.275606] frontend_changed: backend/vbd/9/2049: prepare for reconnect
[ 62.278935] frontend_changed: backend/vbd/9/2050: prepare for reconnect
[ 62.499245] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 62.513016] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 62.543374] alloc irq_desc for 387 on node 0
[ 62.543378] alloc kstat_irqs on node 0
[ 62.861023] alloc irq_desc for 386 on node 0
[ 62.861028] alloc kstat_irqs on node 0
[ 63.256785] device vif10.0 entered promiscuous mode
[ 63.262714] xen_bridge: port 4(vif10.0) entering learning state
[ 64.149008] vif9.0: no IPv6 routers present
[ 65.157330] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi)
[ 65.157580] alloc irq_desc for 385 on node 0
[ 65.157583] alloc kstat_irqs on node 0
[ 65.197493] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi)
[ 65.197756] alloc irq_desc for 384 on node 0
[ 65.197760] alloc kstat_irqs on node 0
[ 68.755013] xen_bridge: port 3(vif9.0) entering forwarding state
[ 71.207928] frontend_changed: backend/vbd/10/2049: prepare for reconnect
[ 71.220911] frontend_changed: backend/vbd/10/2050: prepare for reconnect
[ 71.482712] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 71.508573] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 71.508836] alloc irq_desc for 383 on node 0
[ 71.508839] alloc kstat_irqs on node 0
[ 71.579051] alloc irq_desc for 382 on node 0
[ 71.579055] alloc kstat_irqs on node 0
[ 71.676875] alloc irq_desc for 381 on node 0
[ 71.676880] alloc kstat_irqs on node 0
[ 72.231014] device vif11.0 entered promiscuous mode
[ 72.234608] xen_bridge: port 5(vif11.0) entering learning state
[ 72.614605] xen_bridge: port 5(vif11.0) entering disabled state
[ 72.617268] xen_bridge: port 5(vif11.0) entering disabled state
[ 73.667027] vif10.0: no IPv6 routers present
[ 74.757811] device vif12.0 entered promiscuous mode
[ 74.761984] xen_bridge: port 5(vif12.0) entering learning state
[ 74.884753] xen_bridge: port 5(vif12.0) entering disabled state
[ 74.887271] xen_bridge: port 5(vif12.0) entering disabled state
[ 76.883588] device vif13.0 entered promiscuous mode
[ 76.891503] xen_bridge: port 5(vif13.0) entering learning state
[ 77.484767] xen_bridge: port 5(vif13.0) entering disabled state
[ 77.489290] xen_bridge: port 5(vif13.0) entering disabled state
[ 78.263040] xen_bridge: port 4(vif10.0) entering forwarding state
[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 35049 bytes --]
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [94] HyperTransport: #1a
Capabilities: [60] HyperTransport: Retry Mode
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=0 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: 1.0GHz
Link Error 0: <Prot+ <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD+
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [d0] HyperTransport: #1c
00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075d] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at ff00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
00:07.0 Audio device [0403]: nVidia Corporation Device [10de:0774] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: HDA Intel
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:09.0 IDE interface [0101]: nVidia Corporation Device [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 407
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at f700 [size=16]
Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] SATA HBA <?>
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
Address: 00000000fee0100c Data: 41c0
Capabilities: [ec] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP78S [GeForce 8200] Ethernet [10de:0760] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 405
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at f600 [size=8]
Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4 Enable+
Address: 00000000fee0100c Data: 4141
Masking: 0000fffe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4198
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 41a0
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 3, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:13.0 PCI bridge [0604]: nVidia Corporation Device [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 41a8
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:14.0 PCI bridge [0604]: nVidia Corporation Device [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd600000-fd6fffff
Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 41b0
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
01:08.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
01:08.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
01:08.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
01:0a.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:084d] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at e6000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
05:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Gammagraphx, Inc. Device [0000:0000]
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
06:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd8ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
06:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
06:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [1838:1074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 16
Region 0: Memory at fd8fd000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
07:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) [8086:10b9] (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter [8086:1083]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 406
Region 0: Memory at fd6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fd6c0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 9c00 [size=32]
Expansion ROM at fd6a0000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0100c Data: 4139
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Device Serial Number fe-68-2c-ff-ff-21-1b-00
Kernel driver in use: e1000e
[-- Attachment #5: menu.lst --]
[-- Type: application/octet-stream, Size: 376 bytes --]
title Xen-3.4.2-amd64 / Debian GNU/Linux, kernel 2.6.31.6-pvops
root (hd0,0)
kernel /xen-3.4.2.gz dom0_mem=768M com1=115200,8n1 console=com1,vga
module /vmlinuz-2.6.31.6 root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)
module /initrd.img-2.6.31.6
[-- Attachment #6: xm-dmesg.txt --]
[-- Type: text/plain, Size: 6946 bytes --]
__ __ _____ _ _ ____
\ \/ /___ _ __ |___ /| || | |___ \
\ // _ \ \047_ \ |_ \| || |_ __) |
/ \ __/ | | | ___) |__ _| / __/
/_/\_\___|_| |_| |____(_) |_|(_)_____|
(XEN) Xen version 3.4.2 (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Mon Dec 14 00:21:03 CET 2009
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: dom0_mem=768M com1=115200,8n1 console=com1,vga
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000afee0000 (usable)
(XEN) 00000000afee0000 - 00000000afee3000 (ACPI NVS)
(XEN) 00000000afee3000 - 00000000afef0000 (ACPI data)
(XEN) 00000000afef0000 - 00000000aff00000 (reserved)
(XEN) 00000000b0000000 - 00000000c0000000 (reserved)
(XEN) 00000000f0000000 - 00000000f4000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000200000000 (usable)
(XEN) System RAM: 6910MB (7076348kB)
(XEN) ACPI: RSDP 000F7550, 0024 (r2 Nvidia)
(XEN) ACPI: XSDT AFEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) ACPI: FACP AFEED3C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) ACPI Warning (tbfadt-0444): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
(XEN) ACPI: DSDT AFEE3280, A0D8 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
(XEN) ACPI: FACS AFEE0A80, 0040
(XEN) ACPI: SSDT AFEED600, 028A (r1 PTLTD POWERNOW 1 LTP 1)
(XEN) ACPI: HPET AFEED900, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
(XEN) ACPI: MCFG AFEED980, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) ACPI: APIC AFEED500, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
(XEN) Domain heap initialised
(XEN) Processor #0 15:11 APIC version 16
(XEN) Processor #1 15:11 APIC version 16
(XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2500.053 MHz processor.
(XEN) AMD SVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) CPU0: AMD K8 machine check reporting enabled.
(XEN) CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
(XEN) Booting processor 1/1 eip 8c000
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU1: AMD K8 machine check reporting enabled.
(XEN) CPU1: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs:
(XEN) CPU#0 had -225 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 225 usecs TSC skew, fixed it up.
(XEN) Platform timer is 25.000MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1aca000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000001f4000000->00000001f8000000 (180224 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81aca000
(XEN) Init. ramdisk: ffffffff81aca000->ffffffff82094000
(XEN) Phys-Mach map: ffffffff82094000->ffffffff82214000
(XEN) Start info: ffffffff82214000->ffffffff822144b4
(XEN) Page tables: ffffffff82215000->ffffffff8222a000
(XEN) Boot stack: ffffffff8222a000->ffffffff8222b000
(XEN) TOTAL: ffffffff80000000->ffffffff82400000
(XEN) ENTRY ADDRESS: ffffffff81923a60
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .............................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch input to Xen)
(XEN) Freed 136kB init memory.
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0
(XEN) ioapic_guest_write: old_entry=00010900, new_entry=000009f0
(XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!
(XEN) traps.c:2232:d0 Domain attempted WRMSR 000000000000017b from 00000000:0000001f to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 0000000000000400 from 00000000:0000007f to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 0000000000000404 from 00000000:ffffffff to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 0000000000000408 from 00000000:000fffff to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 000000000000040c from 00000000:00000007 to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 0000000000000410 from 00000000:00043bff to ffffffff:fffffbff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 000000000000017b from 00000000:0000001f to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 0000000000000400 from 00000000:0000007f to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 0000000000000404 from 00000000:ffffffff to ffffffff:ffffffff.
(XEN) traps.c:2232:d0 Domain attempted WRMSR 0000000000000408 from 00000000:000fffff to ffffffff:ffffffff.
(XEN) ioapic_guest_write: apic=0, pin=16, old_irq=16, new_irq=16
(XEN) ioapic_guest_write: old_entry=0000a990, new_entry=0001a990
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=16, old_irq=16, new_irq=16
(XEN) ioapic_guest_write: old_entry=0000a990, new_entry=0001a990
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=16, old_irq=16, new_irq=16
(XEN) ioapic_guest_write: old_entry=0000a990, new_entry=0001a990
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=21, old_irq=21, new_irq=21
(XEN) ioapic_guest_write: old_entry=0000a9d8, new_entry=0001a9d8
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[-- Attachment #7: xm-info.txt --]
[-- Type: text/plain, Size: 1129 bytes --]
host : serveerstertje
release : 2.6.31.6
version : #1 SMP Sun Dec 13 23:35:36 CET 2009
machine : x86_64
nr_cpus : 2
nr_nodes : 1
cores_per_socket : 2
threads_per_core : 1
cpu_mhz : 2500
hw_caps : 178bf3ff:ebd3fbff:00000000:00000010:00002001:00000000:0000011f:00000000
virt_caps : hvm
total_memory : 6910
free_memory : 5033
node_to_cpu : node0:0-1
node_to_memory : node0:5033
xen_major : 3
xen_minor : 4
xen_extra : .2
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : unavailable
cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
cc_compile_by : root
cc_compile_domain :
cc_compile_date : Mon Dec 14 00:21:03 CET 2009
xend_config_format : 4
[-- Attachment #8: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices
2009-12-14 9:46 ` Sander Eikelenboom
@ 2009-12-14 11:21 ` Sander Eikelenboom
2009-12-14 15:26 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 7+ messages in thread
From: Sander Eikelenboom @ 2009-12-14 11:21 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel@lists.xensource.com
Reverting to 2.6.31.6 with commit fce462ce4dd8dc75a76be8fdcd89d2eba7d11bae Merge remote branch 'xen/xen/dom0/acpi-parser' into xen/master
And pciback works.
--
Sander
Monday, December 14, 2009, 10:46:32 AM, you wrote:
> Problem is the same on the real 3.4.2 + 2.6.31.6-pvops.
> the right files attachted
> Monday, December 14, 2009, 10:31:05 AM, you wrote:
>> Whoops made a mistake, actually booted the xen-4.0.0-pre hypervisor.
>> Monday, December 14, 2009, 10:12:09 AM, you wrote:
>>> Hi Konrad,
>>> I was trying 2.6.31.6 pvops on my xen-3.4.2 server passing through 3 pci-devices, but none seems to get seized by pciback.
>>> On xen-3.4.2 in combination with a xenified 2.6.29 kernel/ 2.6.18.8-xen kernel it works fine with the same config in grub.
>>> Could this be due to the renaming stuff of blkdev pciback to xen-blkdev xen-pciback etc. ?
>>> Attachted:
>>> - xm info
>>> - xm dmesg
>>> - dmesg
>>> - lspci -vvvknn
>>> - .config 2.6.31.6 pvops kernel
>>> - grub menu.lst
>>> (if it helps i could send the same for the working combination.
>>> --
>>> Sander
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices
2009-12-14 11:21 ` Sander Eikelenboom
@ 2009-12-14 15:26 ` Konrad Rzeszutek Wilk
0 siblings, 0 replies; 7+ messages in thread
From: Konrad Rzeszutek Wilk @ 2009-12-14 15:26 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel@lists.xensource.com
On Mon, Dec 14, 2009 at 12:21:44PM +0100, Sander Eikelenboom wrote:
> Reverting to 2.6.31.6 with commit fce462ce4dd8dc75a76be8fdcd89d2eba7d11bae Merge remote branch 'xen/xen/dom0/acpi-parser' into xen/master
>
> And pciback works.
Using 'xen-pciback.hide=(xx:yy:zz)' also does the trick.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices
2009-12-14 9:12 [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices Sander Eikelenboom
2009-12-14 9:31 ` Sander Eikelenboom
@ 2009-12-14 14:54 ` Konrad Rzeszutek Wilk
2009-12-14 15:37 ` Sander Eikelenboom
1 sibling, 1 reply; 7+ messages in thread
From: Konrad Rzeszutek Wilk @ 2009-12-14 14:54 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel
On Mon, Dec 14, 2009 at 10:12:09AM +0100, Sander Eikelenboom wrote:
> Hi Konrad,
>
> I was trying 2.6.31.6 pvops on my xen-3.4.2 server passing through 3 pci-devices, but none seems to get seized by pciback.
> On xen-3.4.2 in combination with a xenified 2.6.29 kernel/ 2.6.18.8-xen kernel it works fine with the same config in grub.
>
> Could this be due to the renaming stuff of blkdev pciback to xen-blkdev xen-pciback etc. ?
Might be. Try to change the 'pciback.hide' to 'xen-pciback.hide' and see if that
helps you out. In the meantime I am going to try to try the same thing on my box.
I usually do the unbind, new-slot, bind process.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices
2009-12-14 14:54 ` Konrad Rzeszutek Wilk
@ 2009-12-14 15:37 ` Sander Eikelenboom
0 siblings, 0 replies; 7+ messages in thread
From: Sander Eikelenboom @ 2009-12-14 15:37 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
Yeps that's it,
xen-pciback.hide instead of pciback.hide works fine.
Hmm perhaps it would be nice to have some "autobind" option for devices in .cfg.
So you can let xend autounbind and bind pci and usb devices.
Or some scripting hooks like onbeforestart, etc.
Apart from not getting it to reboot, 2.6.31.6 pvops seems to work fine at the moment :-)
Thx !
--
Sander
Monday, December 14, 2009, 3:54:00 PM, you wrote:
> On Mon, Dec 14, 2009 at 10:12:09AM +0100, Sander Eikelenboom wrote:
>> Hi Konrad,
>>
>> I was trying 2.6.31.6 pvops on my xen-3.4.2 server passing through 3 pci-devices, but none seems to get seized by pciback.
>> On xen-3.4.2 in combination with a xenified 2.6.29 kernel/ 2.6.18.8-xen kernel it works fine with the same config in grub.
>>
>> Could this be due to the renaming stuff of blkdev pciback to xen-blkdev xen-pciback etc. ?
> Might be. Try to change the 'pciback.hide' to 'xen-pciback.hide' and see if that
> helps you out. In the meantime I am going to try to try the same thing on my box.
> I usually do the unbind, new-slot, bind process.
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-12-14 15:37 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-14 9:12 [xen-3.4.2][2.6.31.6-pvops] pciback not seizing devices Sander Eikelenboom
2009-12-14 9:31 ` Sander Eikelenboom
2009-12-14 9:46 ` Sander Eikelenboom
2009-12-14 11:21 ` Sander Eikelenboom
2009-12-14 15:26 ` Konrad Rzeszutek Wilk
2009-12-14 14:54 ` Konrad Rzeszutek Wilk
2009-12-14 15:37 ` Sander Eikelenboom
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.