From: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-arch@vger.kernel.org,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>,
Arun Bharadwaj <arun@linux.vnet.ibm.com>,
Ingo Molnar <mingo@elte.hu>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [v10 PATCH 8/9]: pSeries: implement pSeries processor idle module
Date: Tue, 15 Dec 2009 17:19:22 +0530 [thread overview]
Message-ID: <20091215114922.GA23415@linux.vnet.ibm.com> (raw)
In-Reply-To: <1259920852.2076.1274.camel@pasglop>
* Benjamin Herrenschmidt <benh@kernel.crashing.org> [2009-12-04 21:00:52]:
> On Fri, 2009-12-04 at 13:45 +0530, Arun R Bharadwaj wrote:
>
> >
> > Hi Ben,
> >
> > I forgot to attach the patch which enables cpuidle for the rest of the
> > POWER platforms. Attaching it below.
> >
> > So for these platforms, ppc_md.power_save will be called from from the
> > cpuidle_idle_call idle loop itself. Also, this cpuidle_idle_call is
> > not a pseries specific idle loop. It is a common loop for Intel and
> > PPC which use cpuidle infrastructure.
>
> Ok, so there was a missing piece in the puzzle ;-)
>
> I'll review asap.
>
Hi Ben,
Did you get time to review this?
thanks
arun
> Cheers,
> Ben.
>
> > arun
> >
> >
> >
> > This patch enables cpuidle for the rest of the POWER platforms like
> > 44x, Cell, Pasemi etc.
> >
> > Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
> > ---
> > arch/powerpc/include/asm/system.h | 2 ++
> > arch/powerpc/kernel/idle.c | 28 ++++++++++++++++++++++++++++
> > arch/powerpc/kernel/setup_32.c | 8 ++++++--
> > arch/powerpc/platforms/44x/idle.c | 2 ++
> > arch/powerpc/platforms/cell/pervasive.c | 2 ++
> > arch/powerpc/platforms/pasemi/idle.c | 2 ++
> > arch/powerpc/platforms/ps3/setup.c | 2 ++
> > 7 files changed, 44 insertions(+), 2 deletions(-)
> >
> > Index: linux.trees.git/arch/powerpc/include/asm/system.h
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/include/asm/system.h
> > +++ linux.trees.git/arch/powerpc/include/asm/system.h
> > @@ -551,8 +551,10 @@ void cpu_idle_wait(void);
> >
> > #ifdef CONFIG_CPU_IDLE
> > extern void update_smt_snooze_delay(int snooze);
> > +extern void setup_cpuidle_ppc(void);
> > #else
> > static inline void update_smt_snooze_delay(int snooze) {}
> > +static inline void setup_cpuidle_ppc(void) {}
> > #endif
> >
> > #endif /* __KERNEL__ */
> > Index: linux.trees.git/arch/powerpc/kernel/idle.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/kernel/idle.c
> > +++ linux.trees.git/arch/powerpc/kernel/idle.c
> > @@ -129,6 +129,34 @@ void default_idle(void)
> > HMT_very_low();
> > }
> >
> > +#ifdef CONFIG_CPU_IDLE
> > +DEFINE_PER_CPU(struct cpuidle_device, ppc_idle_devices);
> > +struct cpuidle_driver cpuidle_ppc_driver = {
> > + .name = "cpuidle_ppc",
> > +};
> > +
> > +static void ppc_idle_loop(struct cpuidle_device *dev, struct cpuidle_state *st)
> > +{
> > + ppc_md.power_save();
> > +}
> > +
> > +void setup_cpuidle_ppc(void)
> > +{
> > + struct cpuidle_device *dev;
> > + int cpu;
> > +
> > + cpuidle_register_driver(&cpuidle_ppc_driver);
> > +
> > + for_each_online_cpu(cpu) {
> > + dev = &per_cpu(ppc_idle_devices, cpu);
> > + dev->cpu = cpu;
> > + dev->states[0].enter = ppc_idle_loop;
> > + dev->state_count = 1;
> > + cpuidle_register_device(dev);
> > + }
> > +}
> > +#endif
> > +
> > int powersave_nap;
> >
> > #ifdef CONFIG_SYSCTL
> > Index: linux.trees.git/arch/powerpc/kernel/setup_32.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/kernel/setup_32.c
> > +++ linux.trees.git/arch/powerpc/kernel/setup_32.c
> > @@ -133,14 +133,18 @@ notrace void __init machine_init(unsigne
> >
> > #ifdef CONFIG_6xx
> > if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
> > - cpu_has_feature(CPU_FTR_CAN_NAP))
> > + cpu_has_feature(CPU_FTR_CAN_NAP)) {
> > ppc_md.power_save = ppc6xx_idle;
> > + setup_cpuidle_ppc();
> > + }
> > #endif
> >
> > #ifdef CONFIG_E500
> > if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
> > - cpu_has_feature(CPU_FTR_CAN_NAP))
> > + cpu_has_feature(CPU_FTR_CAN_NAP)) {
> > ppc_md.power_save = e500_idle;
> > + setup_cpuidle_ppc();
> > + }
> > #endif
> > if (ppc_md.progress)
> > ppc_md.progress("id mach(): done", 0x200);
> > Index: linux.trees.git/arch/powerpc/platforms/44x/idle.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/44x/idle.c
> > +++ linux.trees.git/arch/powerpc/platforms/44x/idle.c
> > @@ -24,6 +24,7 @@
> > #include <linux/of.h>
> > #include <linux/kernel.h>
> > #include <asm/machdep.h>
> > +#include <asm/system.h>
> >
> > static int mode_spin;
> >
> > @@ -46,6 +47,7 @@ int __init ppc44x_idle_init(void)
> > /* If we are not setting spin mode
> > then we set to wait mode */
> > ppc_md.power_save = &ppc44x_idle;
> > + setup_cpuidle_ppc();
> > }
> >
> > return 0;
> > Index: linux.trees.git/arch/powerpc/platforms/cell/pervasive.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/cell/pervasive.c
> > +++ linux.trees.git/arch/powerpc/platforms/cell/pervasive.c
> > @@ -35,6 +35,7 @@
> > #include <asm/pgtable.h>
> > #include <asm/reg.h>
> > #include <asm/cell-regs.h>
> > +#include <asm/system.h>
> >
> > #include "pervasive.h"
> >
> > @@ -128,5 +129,6 @@ void __init cbe_pervasive_init(void)
> > }
> >
> > ppc_md.power_save = cbe_power_save;
> > + setup_cpuidle_ppc();
> > ppc_md.system_reset_exception = cbe_system_reset_exception;
> > }
> > Index: linux.trees.git/arch/powerpc/platforms/pasemi/idle.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/pasemi/idle.c
> > +++ linux.trees.git/arch/powerpc/platforms/pasemi/idle.c
> > @@ -27,6 +27,7 @@
> > #include <asm/machdep.h>
> > #include <asm/reg.h>
> > #include <asm/smp.h>
> > +#include <asm/system.h>
> >
> > #include "pasemi.h"
> >
> > @@ -81,6 +82,7 @@ static int __init pasemi_idle_init(void)
> >
> > ppc_md.system_reset_exception = pasemi_system_reset_exception;
> > ppc_md.power_save = modes[current_mode].entry;
> > + setup_cpuidle_ppc();
> > printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name);
> >
> > return 0;
> > Index: linux.trees.git/arch/powerpc/platforms/ps3/setup.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/ps3/setup.c
> > +++ linux.trees.git/arch/powerpc/platforms/ps3/setup.c
> > @@ -33,6 +33,7 @@
> > #include <asm/prom.h>
> > #include <asm/lv1call.h>
> > #include <asm/ps3gpu.h>
> > +#include <asm/system.h>
> >
> > #include "platform.h"
> >
> > @@ -214,6 +215,7 @@ static void __init ps3_setup_arch(void)
> > prealloc_ps3flash_bounce_buffer();
> >
> > ppc_md.power_save = ps3_power_save;
> > + setup_cpuidle_ppc();
> > ps3_os_area_init();
> >
> > DBG(" <- %s:%d\n", __func__, __LINE__);
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-arch" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Ingo Molnar <mingo@elte.hu>,
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
Dipankar Sarma <dipankar@in.ibm.com>,
Balbir Singh <balbir@in.ibm.com>,
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arch@vger.kernel.org, linux-acpi@vger.kernel.org,
Arun Bharadwaj <arun@linux.vnet.ibm.com>
Subject: Re: [v10 PATCH 8/9]: pSeries: implement pSeries processor idle module
Date: Tue, 15 Dec 2009 17:19:22 +0530 [thread overview]
Message-ID: <20091215114922.GA23415@linux.vnet.ibm.com> (raw)
Message-ID: <20091215114922.b2yLQoan5ad5gcwmebzLiyi4DhTJMkOzI4bu9WuAWiQ@z> (raw)
In-Reply-To: <1259920852.2076.1274.camel@pasglop>
* Benjamin Herrenschmidt <benh@kernel.crashing.org> [2009-12-04 21:00:52]:
> On Fri, 2009-12-04 at 13:45 +0530, Arun R Bharadwaj wrote:
>
> >
> > Hi Ben,
> >
> > I forgot to attach the patch which enables cpuidle for the rest of the
> > POWER platforms. Attaching it below.
> >
> > So for these platforms, ppc_md.power_save will be called from from the
> > cpuidle_idle_call idle loop itself. Also, this cpuidle_idle_call is
> > not a pseries specific idle loop. It is a common loop for Intel and
> > PPC which use cpuidle infrastructure.
>
> Ok, so there was a missing piece in the puzzle ;-)
>
> I'll review asap.
>
Hi Ben,
Did you get time to review this?
thanks
arun
> Cheers,
> Ben.
>
> > arun
> >
> >
> >
> > This patch enables cpuidle for the rest of the POWER platforms like
> > 44x, Cell, Pasemi etc.
> >
> > Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
> > ---
> > arch/powerpc/include/asm/system.h | 2 ++
> > arch/powerpc/kernel/idle.c | 28 ++++++++++++++++++++++++++++
> > arch/powerpc/kernel/setup_32.c | 8 ++++++--
> > arch/powerpc/platforms/44x/idle.c | 2 ++
> > arch/powerpc/platforms/cell/pervasive.c | 2 ++
> > arch/powerpc/platforms/pasemi/idle.c | 2 ++
> > arch/powerpc/platforms/ps3/setup.c | 2 ++
> > 7 files changed, 44 insertions(+), 2 deletions(-)
> >
> > Index: linux.trees.git/arch/powerpc/include/asm/system.h
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/include/asm/system.h
> > +++ linux.trees.git/arch/powerpc/include/asm/system.h
> > @@ -551,8 +551,10 @@ void cpu_idle_wait(void);
> >
> > #ifdef CONFIG_CPU_IDLE
> > extern void update_smt_snooze_delay(int snooze);
> > +extern void setup_cpuidle_ppc(void);
> > #else
> > static inline void update_smt_snooze_delay(int snooze) {}
> > +static inline void setup_cpuidle_ppc(void) {}
> > #endif
> >
> > #endif /* __KERNEL__ */
> > Index: linux.trees.git/arch/powerpc/kernel/idle.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/kernel/idle.c
> > +++ linux.trees.git/arch/powerpc/kernel/idle.c
> > @@ -129,6 +129,34 @@ void default_idle(void)
> > HMT_very_low();
> > }
> >
> > +#ifdef CONFIG_CPU_IDLE
> > +DEFINE_PER_CPU(struct cpuidle_device, ppc_idle_devices);
> > +struct cpuidle_driver cpuidle_ppc_driver = {
> > + .name = "cpuidle_ppc",
> > +};
> > +
> > +static void ppc_idle_loop(struct cpuidle_device *dev, struct cpuidle_state *st)
> > +{
> > + ppc_md.power_save();
> > +}
> > +
> > +void setup_cpuidle_ppc(void)
> > +{
> > + struct cpuidle_device *dev;
> > + int cpu;
> > +
> > + cpuidle_register_driver(&cpuidle_ppc_driver);
> > +
> > + for_each_online_cpu(cpu) {
> > + dev = &per_cpu(ppc_idle_devices, cpu);
> > + dev->cpu = cpu;
> > + dev->states[0].enter = ppc_idle_loop;
> > + dev->state_count = 1;
> > + cpuidle_register_device(dev);
> > + }
> > +}
> > +#endif
> > +
> > int powersave_nap;
> >
> > #ifdef CONFIG_SYSCTL
> > Index: linux.trees.git/arch/powerpc/kernel/setup_32.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/kernel/setup_32.c
> > +++ linux.trees.git/arch/powerpc/kernel/setup_32.c
> > @@ -133,14 +133,18 @@ notrace void __init machine_init(unsigne
> >
> > #ifdef CONFIG_6xx
> > if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
> > - cpu_has_feature(CPU_FTR_CAN_NAP))
> > + cpu_has_feature(CPU_FTR_CAN_NAP)) {
> > ppc_md.power_save = ppc6xx_idle;
> > + setup_cpuidle_ppc();
> > + }
> > #endif
> >
> > #ifdef CONFIG_E500
> > if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
> > - cpu_has_feature(CPU_FTR_CAN_NAP))
> > + cpu_has_feature(CPU_FTR_CAN_NAP)) {
> > ppc_md.power_save = e500_idle;
> > + setup_cpuidle_ppc();
> > + }
> > #endif
> > if (ppc_md.progress)
> > ppc_md.progress("id mach(): done", 0x200);
> > Index: linux.trees.git/arch/powerpc/platforms/44x/idle.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/44x/idle.c
> > +++ linux.trees.git/arch/powerpc/platforms/44x/idle.c
> > @@ -24,6 +24,7 @@
> > #include <linux/of.h>
> > #include <linux/kernel.h>
> > #include <asm/machdep.h>
> > +#include <asm/system.h>
> >
> > static int mode_spin;
> >
> > @@ -46,6 +47,7 @@ int __init ppc44x_idle_init(void)
> > /* If we are not setting spin mode
> > then we set to wait mode */
> > ppc_md.power_save = &ppc44x_idle;
> > + setup_cpuidle_ppc();
> > }
> >
> > return 0;
> > Index: linux.trees.git/arch/powerpc/platforms/cell/pervasive.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/cell/pervasive.c
> > +++ linux.trees.git/arch/powerpc/platforms/cell/pervasive.c
> > @@ -35,6 +35,7 @@
> > #include <asm/pgtable.h>
> > #include <asm/reg.h>
> > #include <asm/cell-regs.h>
> > +#include <asm/system.h>
> >
> > #include "pervasive.h"
> >
> > @@ -128,5 +129,6 @@ void __init cbe_pervasive_init(void)
> > }
> >
> > ppc_md.power_save = cbe_power_save;
> > + setup_cpuidle_ppc();
> > ppc_md.system_reset_exception = cbe_system_reset_exception;
> > }
> > Index: linux.trees.git/arch/powerpc/platforms/pasemi/idle.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/pasemi/idle.c
> > +++ linux.trees.git/arch/powerpc/platforms/pasemi/idle.c
> > @@ -27,6 +27,7 @@
> > #include <asm/machdep.h>
> > #include <asm/reg.h>
> > #include <asm/smp.h>
> > +#include <asm/system.h>
> >
> > #include "pasemi.h"
> >
> > @@ -81,6 +82,7 @@ static int __init pasemi_idle_init(void)
> >
> > ppc_md.system_reset_exception = pasemi_system_reset_exception;
> > ppc_md.power_save = modes[current_mode].entry;
> > + setup_cpuidle_ppc();
> > printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name);
> >
> > return 0;
> > Index: linux.trees.git/arch/powerpc/platforms/ps3/setup.c
> > ===================================================================
> > --- linux.trees.git.orig/arch/powerpc/platforms/ps3/setup.c
> > +++ linux.trees.git/arch/powerpc/platforms/ps3/setup.c
> > @@ -33,6 +33,7 @@
> > #include <asm/prom.h>
> > #include <asm/lv1call.h>
> > #include <asm/ps3gpu.h>
> > +#include <asm/system.h>
> >
> > #include "platform.h"
> >
> > @@ -214,6 +215,7 @@ static void __init ps3_setup_arch(void)
> > prealloc_ps3flash_bounce_buffer();
> >
> > ppc_md.power_save = ps3_power_save;
> > + setup_cpuidle_ppc();
> > ps3_os_area_init();
> >
> > DBG(" <- %s:%d\n", __func__, __LINE__);
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-arch" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
next prev parent reply other threads:[~2009-12-15 11:49 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-02 9:54 [v10 PATCH 0/9] cpuidle: cleanup cpuidle/ introduce cpuidle to POWER Arun R Bharadwaj
2009-12-02 9:54 ` Arun R Bharadwaj
2009-12-02 9:54 ` Arun R Bharadwaj
2009-12-02 9:55 ` [v10 PATCH 1/9]: cpuidle: Design documentation patch Arun R Bharadwaj
2009-12-02 9:55 ` Arun R Bharadwaj
2009-12-02 9:55 ` Arun R Bharadwaj
2009-12-02 9:57 ` [v10 PATCH 2/9]: cpuidle: cleanup drivers/cpuidle/cpuidle.c Arun R Bharadwaj
2009-12-02 9:57 ` Arun R Bharadwaj
2009-12-02 9:57 ` Arun R Bharadwaj
2009-12-04 22:20 ` Torsten Duwe
2009-12-04 22:20 ` Torsten Duwe
2009-12-06 5:19 ` Arun R Bharadwaj
2009-12-06 5:19 ` Arun R Bharadwaj
2009-12-07 10:17 ` Torsten Duwe
2009-12-07 10:17 ` Torsten Duwe
2009-12-07 10:56 ` Arun R Bharadwaj
2009-12-07 10:56 ` Arun R Bharadwaj
2009-12-02 9:58 ` [v10 PATCH 3/9]: cpuidle: implement a list based approach to register a set of idle routines Arun R Bharadwaj
2009-12-02 9:58 ` Arun R Bharadwaj
2009-12-02 9:58 ` Arun R Bharadwaj
2009-12-02 9:59 ` [v10 PATCH 4/9]: x86: refactor x86 idle power management code, remove all instances of pm_idle Arun R Bharadwaj
2009-12-02 9:59 ` Arun R Bharadwaj
2009-12-02 9:59 ` Arun R Bharadwaj
2009-12-02 10:00 ` [v10 PATCH 5/9]: POWER: enable cpuidle for POWER Arun R Bharadwaj
2009-12-02 10:00 ` Arun R Bharadwaj
2009-12-02 10:00 ` Arun R Bharadwaj
2009-12-02 10:01 ` [v10 PATCH 6/9]: pSeries/cpuidle: refactor pseries idle loops Arun R Bharadwaj
2009-12-02 10:01 ` Arun R Bharadwaj
2009-12-02 10:01 ` Arun R Bharadwaj
2009-12-04 2:45 ` Benjamin Herrenschmidt
2009-12-04 2:45 ` Benjamin Herrenschmidt
2009-12-02 10:01 ` [v10 PATCH 7/9]: POWER: add a default_idle idle loop for POWER Arun R Bharadwaj
2009-12-02 10:01 ` Arun R Bharadwaj
2009-12-02 10:01 ` Arun R Bharadwaj
2009-12-02 10:02 ` [v10 PATCH 8/9]: pSeries: implement pSeries processor idle module Arun R Bharadwaj
2009-12-02 10:02 ` Arun R Bharadwaj
2009-12-02 10:02 ` Arun R Bharadwaj
2009-12-04 2:47 ` Benjamin Herrenschmidt
2009-12-04 2:47 ` Benjamin Herrenschmidt
2009-12-04 8:15 ` Arun R Bharadwaj
2009-12-04 8:15 ` Arun R Bharadwaj
2009-12-04 10:00 ` Benjamin Herrenschmidt
2009-12-04 10:00 ` Benjamin Herrenschmidt
2009-12-15 11:49 ` Arun R Bharadwaj [this message]
2009-12-15 11:49 ` Arun R Bharadwaj
2009-12-02 10:03 ` [v10 PATCH 9/9]: POWER: Enable default_idle when power_save=off Arun R Bharadwaj
2009-12-02 10:03 ` Arun R Bharadwaj
2009-12-02 10:03 ` Arun R Bharadwaj
2009-12-02 17:41 ` Daniel Walker
2009-12-02 17:41 ` Daniel Walker
2009-12-03 6:33 ` Arun R Bharadwaj
2009-12-03 6:33 ` Arun R Bharadwaj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091215114922.GA23415@linux.vnet.ibm.com \
--to=arun@linux.vnet.ibm.com \
--cc=a.p.zijlstra@chello.nl \
--cc=benh@kernel.crashing.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mingo@elte.hu \
--cc=venkatesh.pallipadi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.