* Re: [RFC] [PATCH] Adding Intel Moorestown PMIC Battery Driver
[not found] <175E0F9A9EFCEA46A65F5552BB0572980445D2BE30@bgsmsx502.gar.corp.intel.com>
@ 2010-01-11 21:32 ` Anton Vorontsov
2010-01-12 17:23 ` Mahalingam, Nithish
2010-01-15 12:01 ` Mahalingam, Nithish
0 siblings, 2 replies; 6+ messages in thread
From: Anton Vorontsov @ 2010-01-11 21:32 UTC (permalink / raw)
To: Mahalingam, Nithish; +Cc: dwmw2@infradead.org, cbou@mail.ru, linux-kernel
Thanks for the patch!
On Mon, Jan 11, 2010 at 05:27:01AM +0530, Mahalingam, Nithish wrote:
[...]
> P.S. As I understand there is no mailing list for power supply subsystem, do
> let me know if I need to add someone else for review.
You can add lkml as well.
Few comments down below.
[...]
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/workqueue.h>
> +#include <linux/jiffies.h>
> +#include <linux/param.h>
> +#include <linux/device.h>
> +#include <linux/spi/spi.h>
> +#include <linux/power_supply.h>
> +
> +#include <asm/ipc_defs.h>
> +#include <linux/usb/langwell_udc.h>
> +
> +
> +MODULE_AUTHOR("Nithish Mahalingam <nithish.mahalingam@intel.com>");
> +MODULE_DESCRIPTION("Intel Moorestown PMIC Battery Driver");
> +MODULE_LICENSE("GPL");
> +
> +#define DRIVER_NAME "pmic_battery"
> +
> +/*********************************************************************
> + * Generic defines
> + *********************************************************************/
> +
> +static int pmicbatteryDebug;
> +module_param(pmicbatteryDebug, int, 0444);
Please don't use camelCase in kernel.
> +MODULE_PARM_DESC(pmicbatteryDebug,
> + "Flag to enable PMIC Battery debug messages.");
> +
> +#define PMIC_BATT_DEBUG (pmicbatteryDebug)
I think you don't need this. There is a dynamic debug
infrastructure exist (see include/linux/device.h, dev_dbg()
stuff).
> +
> +#define PMIC_BATT_DRV_INFO_UPDATED 1
> +#define PMIC_BATT_PRESENT 1
> +#define PMIC_BATT_NOT_PRESENT 0
> +#define PMIC_USB_PRESENT PMIC_BATT_PRESENT
> +#define PMIC_USB_NOT_PRESENT PMIC_BATT_NOT_PRESENT
> +
> +/* pmic battery register related */
> +#define PMIC_BATT_CHR_SCHRGINT_ADDR 0xD2
> +#define PMIC_BATT_CHR_SBATOVP_MASK (1 << 1)
> +#define PMIC_BATT_CHR_STEMP_MASK (1 << 2)
> +#define PMIC_BATT_CHR_SCOMP_MASK (1 << 3)
> +#define PMIC_BATT_CHR_SUSBDET_MASK (1 << 4)
> +#define PMIC_BATT_CHR_SBATDET_MASK (1 << 5)
> +#define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6)
> +#define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7)
> +#define PMIC_BATT_CHR_EXCPT_MASK 0xC6
> +#define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31)
> +#define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF
> +
> +/* pmic ipc related */
> +#define PMIC_BATT_CHR_IPC_CMDID 0xEF
> +#define PMIC_BATT_CHR_IPC_FCHRG_SUBID 0x4
> +#define PMIC_BATT_CHR_IPC_TCHRG_SUBID 0x6
> +
> +/* internal return values */
> +#define BATTSUCCESS 0
> +#define EBATTFAIL 1
> +#define EBATTERR 2
> +
> +/* types of battery charging */
> +enum batt_charge_type {
> + BATT_USBOTG_500MA_CHARGE,
> + BATT_USBOTG_TRICKLE_CHARGE,
> +};
> +
> +/* valid battery events */
> +enum batt_event {
> + BATT_EVENT_BATOVP_EXCPT,
> + BATT_EVENT_USBOVP_EXCPT,
> + BATT_EVENT_TEMP_EXCPT,
> + BATT_EVENT_DCLMT_EXCPT,
> + BATT_EVENT_EXCPT
> +};
> +
> +/* battery cca value */
> +struct batt_cca_data {
> + signed int cca_val;
Why explicitly state that this is signed?
> +};
> +
> +/* battery property structure */
> +struct batt_prop_data {
> + unsigned int batt_capacity;
> + char batt_chrg_crnt;
> + char batt_chrg_volt;
> + char batt_chrg_prot;
> + char batt_chrg_prot2;
> + char batt_chrg_timer;
> +} __attribute__((packed));
> +
> +
> +/*********************************************************************
> + * Battery properties
> + *********************************************************************/
> +
> +/*
> + * pmic battery info
> + */
> +struct pmic_power_module_info {
> + bool is_dev_info_updated;
> + struct spi_device *spi;
> + /* pmic battery data */
> + unsigned long update_time; /* jiffies when data read */
> + unsigned int usb_is_present;
> + unsigned int batt_is_present;
> + unsigned int batt_health;
> + unsigned int usb_health;
> + unsigned int batt_status;
> + unsigned int batt_charge_now; /* in mAS */
> + unsigned int batt_prev_charge_full; /* in mAS */
> + unsigned int batt_charge_rate; /* in units per second */
Per include/linux/power_supply.h and
Documentation/power/power_supply_class.txt
* All voltages, currents, charges, energies, time and temperatures in uV,
* uA, uAh, uWh, seconds and tenths of degree Celsius unless otherwise
* stated. It's driver's job to convert its raw values to units in which
* this class operates.
[...]
> +static void pmic_battery_read_status(struct pmic_power_module_info *pbi)
> +{
> + unsigned int update_time_intrvl = 0;
> + unsigned int chrg_val = 0;
> + struct ipc_pmic_reg_data pmic_batt_reg = {0};
> + struct ipc_cmd_type pmic_batt_cmd = {0};
> + struct batt_cca_data ccval = {0};
> + struct batt_prop_data batt_prop = {0};
> + int batt_present = 0;
> + int usb_present = 0;
> + int batt_exception = 0;
> +
> + /* make sure the last batt_status read happened delay_time before */
> + if (pbi->update_time && time_before(jiffies, pbi->update_time +
> + msecs_to_jiffies(delay_time)))
> + return;
> +
> + update_time_intrvl = jiffies_to_msecs(jiffies - pbi->update_time);
> + pbi->update_time = jiffies;
> +
> + /* read coulomb counter registers and schrgint register */
> +
> + pmic_batt_cmd.ioc = TRUE;
> + pmic_batt_cmd.cmd = IPC_BATT_CCA_READ;
> + if (ipc_config_cmd(pmic_batt_cmd, sizeof(struct batt_cca_data),
I'd write it as
ret = ipc_config_cmd(...);
if (ret) {
dev_warn(..., "%s(): ipc config cmd failed %d\n", __func__, ret);
return;
}
But that's a matter of taste...
> + &ccval)) {
> + dev_warn(&pbi->spi->dev, "%s(): ipc config cmd failed\n",
> + __func__);
> + return;
> + }
> +
> + pmic_batt_reg.ioc = TRUE;
> + pmic_batt_reg.pmic_reg_data[0].register_address =
> + PMIC_BATT_CHR_SCHRGINT_ADDR;
> + pmic_batt_reg.num_entries = 1;
> +
> + if (ipc_pmic_register_read(&pmic_batt_reg)) {
> + dev_warn(&pbi->spi->dev, "%s(): ipc pmic read failed\n",
> + __func__);
> + return;
> + }
> +
> + /*
> + * set pmic_power_module_info members based on pmic register values
> + * read.
> + */
> +
> + /* set batt_is_present */
> + if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_SBATDET_MASK) {
> + pbi->batt_is_present = PMIC_BATT_PRESENT;
> + batt_present = 1;
> + } else {
> + pbi->batt_is_present = PMIC_BATT_NOT_PRESENT;
> + pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN;
> + }
> +
> + /* set batt_health */
> + if (batt_present) {
> + if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_SBATOVP_MASK) {
> + pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT);
> + batt_exception = 1;
> + } else if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_SDCLMT_MASK) {
> + pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT);
> + batt_exception = 1;
> + } else if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_STEMP_MASK) {
> + pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT;
> + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + pmic_battery_log_event(BATT_EVENT_TEMP_EXCPT);
> + batt_exception = 1;
> + } else {
> + pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
> + }
> + }
> +
> + /* set usb_is_present */
> + if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_SUSBDET_MASK) {
> + pbi->usb_is_present = PMIC_USB_PRESENT;
> + usb_present = 1;
> + } else {
> + pbi->usb_is_present = PMIC_USB_NOT_PRESENT;
> + pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + }
> +
> + if (usb_present) {
> + if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_SUSBOVP_MASK) {
> + pbi->usb_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> + pmic_battery_log_event(BATT_EVENT_USBOVP_EXCPT);
> + } else {
> + pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD;
> + }
> + }
> +
> + chrg_val = ccval.cca_val & PMIC_BATT_ADC_ACCCHRGVAL_MASK;
> +
> + /* set batt_prev_charge_full to battery capacity the first time */
> + if (!pbi->is_dev_info_updated) {
> + pmic_batt_cmd.ioc = TRUE;
> + pmic_batt_cmd.cmd = IPC_BATT_GET_PROP;
> + if (ipc_config_cmd(pmic_batt_cmd,
> + sizeof(struct batt_prop_data), &batt_prop)) {
> + dev_warn(&pbi->spi->dev, "%s(): ipc config cmd "
> + "failed\n", __func__);
> + return;
> + }
> + pbi->batt_prev_charge_full = batt_prop.batt_capacity;
> + }
> +
> + /* set batt_status */
> + if ((batt_present) && (!batt_exception)) {
No need for these parenthesis.
> + if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_SCOMP_MASK) {
> + pbi->batt_status = POWER_SUPPLY_STATUS_FULL;
> + pbi->batt_prev_charge_full = chrg_val;
> + } else if (ccval.cca_val & PMIC_BATT_ADC_ACCCHRG_MASK) {
> + pbi->batt_status = POWER_SUPPLY_STATUS_DISCHARGING;
> + } else {
> + pbi->batt_status = POWER_SUPPLY_STATUS_CHARGING;
> + }
> + }
> +
> + /* set batt_charge_rate */
> + if ((pbi->is_dev_info_updated) && (batt_present) && (!batt_exception)) {
Ditto.
> + if (pbi->batt_status == POWER_SUPPLY_STATUS_DISCHARGING) {
> + if (pbi->batt_charge_now - chrg_val) {
> + pbi->batt_charge_rate = ((pbi->batt_charge_now -
> + chrg_val) * 1000 * 60) /
> + update_time_intrvl;
> + }
> + } else if (pbi->batt_status == POWER_SUPPLY_STATUS_CHARGING) {
> + if (chrg_val - pbi->batt_charge_now) {
> + pbi->batt_charge_rate = ((chrg_val -
> + pbi->batt_charge_now) * 1000 * 60) /
> + update_time_intrvl;
> + }
> + } else
> + pbi->batt_charge_rate = 0;
> + } else {
> + pbi->batt_charge_rate = -1;
> + }
> +
> + /* batt_charge_now */
> + if ((batt_present) && (!batt_exception))
The parenthesis aren't needed.
> + pbi->batt_charge_now = chrg_val;
> + else
> + pbi->batt_charge_now = -1;
> +
> + pbi->is_dev_info_updated = PMIC_BATT_DRV_INFO_UPDATED;
> +}
[...]
> +/**
> + * pmic_battery_interrupt_handler - pmic battery interrupt handler
> + * Context: interrupt context
> + *
> + * PMIC battery interrupt handler which will be called with either
> + * battery full condition occurs or usb otg & battery connect
> + * condition occurs.
> + */
> +static irqreturn_t pmic_battery_interrupt_handler(int id, void *dev)
> +{
> + struct pmic_power_module_info *pbi =
> + (struct pmic_power_module_info *)dev;
This type casting isn't needed.
> + schedule_work(&pbi->handler);
I think you can use threaded irq for this.
See documentation for request_threaded_irq() in kernel/irq/manage.c.
And as an example of usage see drivers/mfd/wm8350-irq.c.
> +
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * pmic_battery_handle_intrpt - pmic battery service interrupt
> + * @work: work structure
> + * Context: can sleep
> + *
> + * PMIC battery needs to either update the battery status as full
> + * if it detects battery full condition caused the interrupt or needs
> + * to enable battery charger if it detects usb and battery detect
> + * caused the source of interrupt.
> + */
> +static void pmic_battery_handle_intrpt(struct work_struct *work)
> +{
> + struct ipc_pmic_reg_data pmic_batt_reg = {0};
> + struct pmic_power_module_info *pbi = container_of(work,
> + struct pmic_power_module_info, handler);
> + int power = 0;
> + enum batt_charge_type chrg;
> + int retval = 0;
> +
> + /* check if pmic_power_module_info is initialized */
> + if (!pbi)
This check is useless. container_of will always return non-NULL
result.
> + return;
> +
> + /* read schrgint register to interpret cause of interrupt */
> + pmic_batt_reg.ioc = TRUE;
> + pmic_batt_reg.pmic_reg_data[0].register_address =
> + PMIC_BATT_CHR_SCHRGINT_ADDR;
> + pmic_batt_reg.num_entries = 1;
> +
> + if (ipc_pmic_register_read(&pmic_batt_reg)) {
> + dev_warn(&pbi->spi->dev, "%s(): ipc pmic read failed\n",
> + __func__);
> + return;
> + }
> +
> + /* find the cause of the interrupt */
> +
> + if (pmic_batt_reg.pmic_reg_data[0].value & PMIC_BATT_CHR_SBATDET_MASK) {
> + pbi->batt_is_present = PMIC_BATT_PRESENT;
> + } else {
> + pbi->batt_is_present = PMIC_BATT_NOT_PRESENT;
> + pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN;
> + return;
> + }
> +
> + if (pmic_batt_reg.pmic_reg_data[0].value &
> + PMIC_BATT_CHR_EXCPT_MASK) {
> + pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + pmic_battery_log_event(BATT_EVENT_EXCPT);
> + return;
> + } else {
> + pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
> + pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD;
> + }
> +
> + if (pmic_batt_reg.pmic_reg_data[0].value & PMIC_BATT_CHR_SCOMP_MASK) {
> + struct ipc_cmd_type pmic_batt_cmd = {0};
> + struct batt_cca_data ccval = {0};
> +
> + pbi->batt_status = POWER_SUPPLY_STATUS_FULL;
> + pmic_batt_cmd.ioc = TRUE;
> + pmic_batt_cmd.cmd = IPC_BATT_CCA_READ;
> + if (ipc_config_cmd(pmic_batt_cmd,
> + sizeof(struct batt_cca_data), &ccval)) {
> + dev_warn(&pbi->spi->dev, "%s(): ipc config cmd "
> + "failed\n", __func__);
> + return;
> + }
> + pbi->batt_prev_charge_full = ccval.cca_val &
> + PMIC_BATT_ADC_ACCCHRGVAL_MASK;
> + return;
> + }
> +
> + if (pmic_batt_reg.pmic_reg_data[0].value & PMIC_BATT_CHR_SUSBDET_MASK) {
> + pbi->usb_is_present = PMIC_USB_PRESENT;
> + } else {
> + pbi->usb_is_present = PMIC_USB_NOT_PRESENT;
> + pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + return;
> + }
> +
> + /* setup battery charging */
> +
> + /* check usb otg power capability and set charger accordingly */
> + retval = langwell_udc_maxpower(&power);
> + if (retval) {
> + dev_warn(&pbi->spi->dev, "%s(): usb otg power query failed "
> + "with error code %d\n", __func__, retval);
> + return;
> + }
> +
> + if (power >= 500)
> + chrg = BATT_USBOTG_500MA_CHARGE;
> + else
> + chrg = BATT_USBOTG_TRICKLE_CHARGE;
> +
> + /* enable battery charging */
> + if (pmic_battery_set_charger(pbi, chrg)) {
> + dev_warn(&pbi->spi->dev, "%s(): failed to setup battery "
> + "charging\n", __func__);
> + return;
> + }
> +
> + if (PMIC_BATT_DEBUG)
> + printk(KERN_INFO "pmic-battery: %s() - setting up battery "
> + "charger successful\n", __func__);
dev_dbg().
> +}
> +
> +/**
> + * pmic_battery_probe - pmic battery initialize
> + * @spi: pmic battery spi structure
> + * Context: can sleep
> + *
> + * PMIC battery initializes its internal data structue and other
> + * infrastructure components for it to work as expected.
> + */
> +static int pmic_battery_probe(struct spi_device *spi)
> +{
> + int retval = 0;
> + struct pmic_power_module_info *pbi = 0;
Do not initialize pointers with 0. Plus, you don't actually need
to initialize pbi here.
> +
> + if (PMIC_BATT_DEBUG)
> + printk(KERN_INFO "pmic-battery: %s() - found pmic battery "
> + "device\n", __func__);
> +
> + pbi = kzalloc(sizeof(*pbi), GFP_KERNEL);
> + if (!pbi) {
> + dev_err(&spi->dev, "%s(): memory allocation failed\n",
> + __func__);
> + return -ENOMEM;
> + }
> +
> + pbi->spi = spi;
> + pbi->irq = spi->irq;
> + dev_set_drvdata(&spi->dev, pbi);
> +
> + /* initialize all required framework before enabling interrupts */
> + INIT_WORK(&pbi->handler, (void *)pmic_battery_handle_intrpt);
No need for (void *) cast.
> + INIT_DELAYED_WORK(&pbi->monitor_battery, pmic_battery_monitor);
> + pbi->monitor_wqueue =
> + create_singlethread_workqueue(dev_name(&spi->dev));
> + if (!pbi->monitor_wqueue) {
> + dev_err(&spi->dev, "%s(): wqueue init failed\n", __func__);
> + retval = -ESRCH;
> + goto wqueue_failed;
> + }
> +
> + /* register interrupt */
> + retval = request_irq(pbi->irq, pmic_battery_interrupt_handler,
> + 0, DRIVER_NAME, pbi);
I think you'd better use dev_name() instead of DRIVER_NAME here,
to distinguish interrupts from several devices.
> + if (retval) {
> + dev_err(&spi->dev, "%s(): cannot get IRQ\n", __func__);
> + goto requestirq_failed;
> + }
> +
> + /* register pmic-batt with power supply subsystem */
> + pbi->batt.name = "pmic-batt";
This won't work if we have several pmic batteries. I think you need
kasprintf(GFP_KERNEL, "%s-batt", dev_name(..));
> + pbi->batt.type = POWER_SUPPLY_TYPE_BATTERY;
> + pbi->batt.properties = pmic_battery_props;
> + pbi->batt.num_properties = ARRAY_SIZE(pmic_battery_props);
> + pbi->batt.get_property = pmic_battery_get_property;
> + retval = power_supply_register(&spi->dev, &pbi->batt);
> + if (retval) {
> + dev_err(&spi->dev, "%s(): failed to register pmic battery "
> + "device with power supply subsystem\n",
> + __func__);
> + goto power_reg_failed;
> + }
> +
> + if (PMIC_BATT_DEBUG)
> + printk(KERN_INFO "pmic-battery: %s() - pmic battery device "
> + "registration with power supply subsystem "
> + "successful\n", __func__);
> +
> + queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 1);
> +
> + /* register pmic-usb with power supply subsystem */
> + pbi->usb.name = "pmic-usb";
kasprintf(GFP_KERNEL, "%s-usb", dev_name(..));
> + pbi->usb.type = POWER_SUPPLY_TYPE_USB;
> + pbi->usb.properties = pmic_usb_props;
> + pbi->usb.num_properties = ARRAY_SIZE(pmic_usb_props);
> + pbi->usb.get_property = pmic_usb_get_property;
> + retval = power_supply_register(&spi->dev, &pbi->usb);
> + if (retval) {
> + dev_err(&spi->dev, "%s(): failed to register pmic usb "
> + "device with power supply subsystem\n",
> + __func__);
> + goto power_reg_failed_1;
> + }
> +
> + if (PMIC_BATT_DEBUG)
> + printk(KERN_INFO "pmic-battery: %s() - pmic usb device "
> + "registration with power supply subsystem successful\n",
> + __func__);
> +
> + return retval;
> +
> +power_reg_failed_1:
> + power_supply_unregister(&pbi->batt);
> +power_reg_failed:
> + cancel_rearming_delayed_workqueue(pbi->monitor_wqueue,
> + &pbi->monitor_battery);
> +requestirq_failed:
> + destroy_workqueue(pbi->monitor_wqueue);
> +wqueue_failed:
> + kfree(pbi);
> +
> + return retval;
> +}
> +
> +/**
> + * pmic_battery_remove - pmic battery finalize
> + * @spi: pmic battery spi device structure
> + * Context: can sleep
> + *
> + * PMIC battery finalizes its internal data structue and other
> + * infrastructure components that it initialized in
> + * pmic_battery_probe.
> + */
> +static int pmic_battery_remove(struct spi_device *spi)
__devexit?
> +{
> + struct pmic_power_module_info *pbi = dev_get_drvdata(&spi->dev);
> +
> + if (pbi) {
The check isn't needed. _remove() won't run if device didn't probe
successfully.
> + free_irq(pbi->irq, pbi);
> +
> + cancel_rearming_delayed_workqueue(pbi->monitor_wqueue,
> + &pbi->monitor_battery);
> + destroy_workqueue(pbi->monitor_wqueue);
> +
> + power_supply_unregister(&pbi->usb);
> + power_supply_unregister(&pbi->batt);
> +
> + flush_scheduled_work();
> +
> + kfree(pbi);
> + }
> +
> + return 0;
> +}
> +
> +
> +/*********************************************************************
> + * Driver initialisation and finalization
> + *********************************************************************/
> +
> +static struct spi_driver pmic_battery_driver = {
> + .driver = {
> + .name = DRIVER_NAME,
> + .bus = &spi_bus_type,
> + .owner = THIS_MODULE,
> + },
> + .probe = pmic_battery_probe,
> + .remove = __devexit_p(pmic_battery_remove),
> +};
> +
> +
No need for two empty lines.
> +static int __init pmic_battery_module_init(void)
> +{
> + return spi_register_driver(&pmic_battery_driver);
> +}
> +
> +static void __exit pmic_battery_module_exit(void)
> +{
> + spi_unregister_driver(&pmic_battery_driver);
> +}
> +
> +module_init(pmic_battery_module_init);
> +module_exit(pmic_battery_module_exit);
> --
> 1.6.5.2
Thanks!
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
^ permalink raw reply [flat|nested] 6+ messages in thread