All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@linux-foundation.org>
To: Udo van den Heuvel <udovdh@xs4all.nl>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	Oliver Neukum <oliver@neukum.name>
Subject: Re: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x21a/0x230()
Date: Thu, 21 Jan 2010 16:08:53 -0800	[thread overview]
Message-ID: <20100121160853.bdcd33a1.akpm@linux-foundation.org> (raw)
In-Reply-To: <4B488F90.2010101@xs4all.nl>

(cc's added)

On Sat, 09 Jan 2010 15:15:44 +0100
Udo van den Heuvel <udovdh@xs4all.nl> wrote:

> 
> Hello,
> 
> I just powered up my H2210 Ipaq PDA and the kernel on the workstation it
> was attached to mentioned:

Looks like the USB CDC driver has problems in that 2.6.32.x kernel.

> IPv6 addrconf: prefix with wrong length 48
> IPv6 addrconf: prefix with wrong length 48
> IPv6 addrconf: prefix with wrong length 48
> IPv6 addrconf: prefix with wrong length 48
> IPv6 addrconf: prefix with wrong length 48
> usb 3-1: new full speed USB device using ohci_hcd and address 2
> usb 3-1: New USB device found, idVendor=049f, idProduct=505a
> usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-1: Product: Ethernet Gadget
> usb 3-1: Manufacturer: Linux 2.6.15-hh1/pxa2xx_udc
> usb 3-1: configuration #1 chosen from 1 choice
> usb0: register 'cdc_subset' at usb-0000:00:12.1-1, Linux Device,
> 9e:b5:6f:2c:07:4c
> usb 3-1: USB disconnect, address 2
> usb0: unregister 'cdc_subset' usb-0000:00:12.1-1, Linux Device
> usb 3-1: new full speed USB device using ohci_hcd and address 3
> usb 3-1: New USB device found, idVendor=0525, idProduct=a4a2
> usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-1: Product: RNDIS/Ethernet Gadget
> usb 3-1: Manufacturer: Linux 2.6.21-hh20/pxa2xx_udc
> usb 3-1: configuration #1 chosen from 2 choices
> usb0: register 'cdc_subset' at usb-0000:00:12.1-1, Linux Device,
> 9e:b5:6f:2c:07:4c
> usb0: no IPv6 routers present
> ata7: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
> ata7: irq_stat 0x00a00080, device exchanged
> ata7: hard resetting link
> usb 2-6: new high speed USB device using ehci_hcd and address 5
> usb 2-6: New USB device found, idVendor=05e3, idProduct=0608
> usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> usb 2-6: Product: USB2.0 Hub
> usb 2-6: configuration #1 chosen from 1 choice
> hub 2-6:1.0: USB hub found
> hub 2-6:1.0: 4 ports detected
> usb 2-6.4: new high speed USB device using ehci_hcd and address 6
> usb 2-6.4: New USB device found, idVendor=05e3, idProduct=0723
> usb 2-6.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2
> usb 2-6.4: Product: USB Storage
> usb 2-6.4: Manufacturer: Generic
> usb 2-6.4: SerialNumber: 000000009451
> usb 2-6.4: configuration #1 chosen from 1 choice
> Initializing USB Mass Storage driver...
> scsi9 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 6
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> ------------[ cut here ]------------
> WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x21a/0x230()
> Hardware name:
> NETDEV WATCHDOG: usb0 (cdc_subset): transmit queue 0 timed out
> Modules linked in: usb_storage hid_sunplus usbhid radeon ttm
> drm_kms_helper drm fb i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect
> rfcomm sco bridge stp llc bnep l2cap nfsd nfs_acl auth_rpcgss exportfs
> it87 hwmon_vid lockd sunrpc ipt_REJECT iptable_filter ipt_MASQUERADE
> iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables
> nf_conntrack_netbios_ns ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state
> nf_conntrack ip6table_filter ip6_tables x_tables ipv6 powernow_k8
> binfmt_misc pwc videodev v4l1_compat v4l2_compat_ioctl32 btusb bluetooth
> usblp dm_mirror dm_region_hash dm_log snd_hda_codec_atihdmi
> snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_seq snd_seq_device
> snd_pcm snd_timer snd ohci1394 sr_mod ppdev ehci_hcd sg ieee1394
> parport_pc snd_page_alloc parport ohci_hcd evdev cdrom i2c_piix4 k10temp
> button pata_atiixp sata_sil24 floppy [last unloaded: scsi_wait_scan]
> Pid: 0, comm: swapper Not tainted 2.6.32.2 #4
> Call Trace:
>  <IRQ>  [<ffffffff81042d43>] ? warn_slowpath_common+0x73/0xb0
>  [<ffffffff8103c92e>] ? walk_tg_tree+0x8e/0xc0
>  [<ffffffff81042de0>] ? warn_slowpath_fmt+0x40/0x50
>  [<ffffffff811a9761>] ? strlcpy+0x41/0x50
>  [<ffffffff812f25ca>] ? dev_watchdog+0x21a/0x230
>  [<ffffffff810340ac>] ? __wake_up+0x3c/0x60
>  [<ffffffff8135d912>] ? _spin_unlock_irqrestore+0x12/0x40
>  [<ffffffff812f23b0>] ? dev_watchdog+0x0/0x230
>  [<ffffffff8104d052>] ? run_timer_softirq+0x162/0x260
>  [<ffffffff810615fb>] ? ktime_get+0x5b/0xe0
>  [<ffffffff810487e4>] ? __do_softirq+0xb4/0x140
>  [<ffffffff8100c3ec>] ? call_softirq+0x1c/0x30
>  [<ffffffff8100e2ed>] ? do_softirq+0x4d/0x80
>  [<ffffffff810484c5>] ? irq_exit+0x85/0x90
>  [<ffffffff8101eccb>] ? smp_apic_timer_interrupt+0x6b/0xa0
>  [<ffffffff8100bde3>] ? apic_timer_interrupt+0x13/0x20
>  <EOI>  [<ffffffff81012e10>] ? default_idle+0x20/0x40
>  [<ffffffff8101316b>] ? c1e_idle+0x7b/0x100
>  [<ffffffff8100a516>] ? cpu_idle+0x56/0xc0
> ---[ end trace c9c0cf5c72497ec6 ]---
> 
> 
> This is on Fedora 12 x86_64 with a kernel.org 2.6.32.2...
> 


      reply	other threads:[~2010-01-22  0:09 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-09 14:15 WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x21a/0x230() Udo van den Heuvel
2010-01-22  0:08 ` Andrew Morton [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100121160853.bdcd33a1.akpm@linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=oliver@neukum.name \
    --cc=udovdh@xs4all.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.