From: Udo van den Heuvel <udovdh@xs4all.nl>
To: linux-kernel@vger.kernel.org
Subject: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x21a/0x230()
Date: Sat, 09 Jan 2010 15:15:44 +0100 [thread overview]
Message-ID: <4B488F90.2010101@xs4all.nl> (raw)
Hello,
I just powered up my H2210 Ipaq PDA and the kernel on the workstation it
was attached to mentioned:
IPv6 addrconf: prefix with wrong length 48
IPv6 addrconf: prefix with wrong length 48
IPv6 addrconf: prefix with wrong length 48
IPv6 addrconf: prefix with wrong length 48
IPv6 addrconf: prefix with wrong length 48
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: New USB device found, idVendor=049f, idProduct=505a
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Ethernet Gadget
usb 3-1: Manufacturer: Linux 2.6.15-hh1/pxa2xx_udc
usb 3-1: configuration #1 chosen from 1 choice
usb0: register 'cdc_subset' at usb-0000:00:12.1-1, Linux Device,
9e:b5:6f:2c:07:4c
usb 3-1: USB disconnect, address 2
usb0: unregister 'cdc_subset' usb-0000:00:12.1-1, Linux Device
usb 3-1: new full speed USB device using ohci_hcd and address 3
usb 3-1: New USB device found, idVendor=0525, idProduct=a4a2
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: RNDIS/Ethernet Gadget
usb 3-1: Manufacturer: Linux 2.6.21-hh20/pxa2xx_udc
usb 3-1: configuration #1 chosen from 2 choices
usb0: register 'cdc_subset' at usb-0000:00:12.1-1, Linux Device,
9e:b5:6f:2c:07:4c
usb0: no IPv6 routers present
ata7: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
ata7: irq_stat 0x00a00080, device exchanged
ata7: hard resetting link
usb 2-6: new high speed USB device using ehci_hcd and address 5
usb 2-6: New USB device found, idVendor=05e3, idProduct=0608
usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-6: Product: USB2.0 Hub
usb 2-6: configuration #1 chosen from 1 choice
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 4 ports detected
usb 2-6.4: new high speed USB device using ehci_hcd and address 6
usb 2-6.4: New USB device found, idVendor=05e3, idProduct=0723
usb 2-6.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 2-6.4: Product: USB Storage
usb 2-6.4: Manufacturer: Generic
usb 2-6.4: SerialNumber: 000000009451
usb 2-6.4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x21a/0x230()
Hardware name:
NETDEV WATCHDOG: usb0 (cdc_subset): transmit queue 0 timed out
Modules linked in: usb_storage hid_sunplus usbhid radeon ttm
drm_kms_helper drm fb i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect
rfcomm sco bridge stp llc bnep l2cap nfsd nfs_acl auth_rpcgss exportfs
it87 hwmon_vid lockd sunrpc ipt_REJECT iptable_filter ipt_MASQUERADE
iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables
nf_conntrack_netbios_ns ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state
nf_conntrack ip6table_filter ip6_tables x_tables ipv6 powernow_k8
binfmt_misc pwc videodev v4l1_compat v4l2_compat_ioctl32 btusb bluetooth
usblp dm_mirror dm_region_hash dm_log snd_hda_codec_atihdmi
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_seq snd_seq_device
snd_pcm snd_timer snd ohci1394 sr_mod ppdev ehci_hcd sg ieee1394
parport_pc snd_page_alloc parport ohci_hcd evdev cdrom i2c_piix4 k10temp
button pata_atiixp sata_sil24 floppy [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.32.2 #4
Call Trace:
<IRQ> [<ffffffff81042d43>] ? warn_slowpath_common+0x73/0xb0
[<ffffffff8103c92e>] ? walk_tg_tree+0x8e/0xc0
[<ffffffff81042de0>] ? warn_slowpath_fmt+0x40/0x50
[<ffffffff811a9761>] ? strlcpy+0x41/0x50
[<ffffffff812f25ca>] ? dev_watchdog+0x21a/0x230
[<ffffffff810340ac>] ? __wake_up+0x3c/0x60
[<ffffffff8135d912>] ? _spin_unlock_irqrestore+0x12/0x40
[<ffffffff812f23b0>] ? dev_watchdog+0x0/0x230
[<ffffffff8104d052>] ? run_timer_softirq+0x162/0x260
[<ffffffff810615fb>] ? ktime_get+0x5b/0xe0
[<ffffffff810487e4>] ? __do_softirq+0xb4/0x140
[<ffffffff8100c3ec>] ? call_softirq+0x1c/0x30
[<ffffffff8100e2ed>] ? do_softirq+0x4d/0x80
[<ffffffff810484c5>] ? irq_exit+0x85/0x90
[<ffffffff8101eccb>] ? smp_apic_timer_interrupt+0x6b/0xa0
[<ffffffff8100bde3>] ? apic_timer_interrupt+0x13/0x20
<EOI> [<ffffffff81012e10>] ? default_idle+0x20/0x40
[<ffffffff8101316b>] ? c1e_idle+0x7b/0x100
[<ffffffff8100a516>] ? cpu_idle+0x56/0xc0
---[ end trace c9c0cf5c72497ec6 ]---
This is on Fedora 12 x86_64 with a kernel.org 2.6.32.2...
Udo
next reply other threads:[~2010-01-09 14:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-09 14:15 Udo van den Heuvel [this message]
2010-01-22 0:08 ` WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x21a/0x230() Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B488F90.2010101@xs4all.nl \
--to=udovdh@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.