* [PATCH v2] ARM: S5P6440: Move common memory map definitions for S5P to plat-s5p
@ 2010-01-27 2:14 Kukjin Kim
2010-01-27 5:02 ` Ben Dooks
0 siblings, 1 reply; 2+ messages in thread
From: Kukjin Kim @ 2010-01-27 2:14 UTC (permalink / raw)
To: linux-samsung-soc; +Cc: ben-linux, Kukjin Kim
This patch moves common memory map definitions for S5P such as S5P_VA_XXX
into plat-s5p/include/mach/map-s5p.h from mach-s5p6440/include/mach.
And this patch removes unnecessary definitions in the map.h and irq.c
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s5p6440/include/mach/debug-macro.S | 4 +-
arch/arm/mach-s5p6440/include/mach/map.h | 65 ++++-----------------
arch/arm/mach-s5p6440/include/mach/regs-clock.h | 2 +-
arch/arm/mach-s5p6440/include/mach/tick.h | 2 +-
arch/arm/mach-s5p6440/mach-smdk6440.c | 4 +-
arch/arm/plat-s5p/cpu.c | 19 ++++---
arch/arm/plat-s5p/include/plat/irqs.h | 2 +
arch/arm/plat-s5p/include/plat/map-s5p.h | 32 +++++++++++
arch/arm/plat-s5p/irq.c | 5 +-
9 files changed, 65 insertions(+), 70 deletions(-)
create mode 100644 arch/arm/plat-s5p/include/plat/map-s5p.h
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
index f3a5d16..48cdb0d 100644
--- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
@@ -22,8 +22,8 @@
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
- ldreq \rx, = S5P_PA_UART
- ldrne \rx, = (S5P_VA_UART + S5P_PA_UART & 0xfffff)
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
index 4a73e73..8924e5a 100644
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -14,94 +14,55 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s5p.h>
-/* Chip ID */
#define S5P6440_PA_CHIPID (0xE0000000)
#define S5P_PA_CHIPID S5P6440_PA_CHIPID
-#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
-/* SYSCON */
#define S5P6440_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P6440_PA_SYSCON
-#define S5P_VA_SYSCON S3C_VA_SYS
-
#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0)
-#define S5P_PA_CLK S5P6440_PA_CLK
-#define S5P_VA_CLK (S5P_VA_SYSCON + 0x0)
+#define S5P_PA_SYSCON S5P6440_PA_SYSCON
-/* GPIO */
#define S5P6440_PA_GPIO (0xE0308000)
#define S5P_PA_GPIO S5P6440_PA_GPIO
-#define S5P_VA_GPIO S3C_ADDR(0x00500000)
-/* VIC0 */
#define S5P6440_PA_VIC0 (0xE4000000)
#define S5P_PA_VIC0 S5P6440_PA_VIC0
-#define S5P_VA_VIC0 (S3C_VA_IRQ + 0x0)
-#define VA_VIC0 S5P_VA_VIC0
-/* VIC1 */
#define S5P6440_PA_VIC1 (0xE4100000)
#define S5P_PA_VIC1 S5P6440_PA_VIC1
-#define S5P_VA_VIC1 (S3C_VA_IRQ + 0x10000)
-#define VA_VIC1 S5P_VA_VIC1
-/* Timer */
#define S5P6440_PA_TIMER (0xEA000000)
#define S5P_PA_TIMER S5P6440_PA_TIMER
-#define S5P_VA_TIMER S3C_VA_TIMER
-/* RTC */
#define S5P6440_PA_RTC (0xEA100000)
#define S5P_PA_RTC S5P6440_PA_RTC
-#define S5P_VA_RTC S3C_ADDR(0x00600000)
-/* WDT */
#define S5P6440_PA_WDT (0xEA200000)
#define S5P_PA_WDT S5P6440_PA_WDT
-#define S5p_VA_WDT S3C_VA_WATCHDOG
-/* UART */
#define S5P6440_PA_UART (0xEC000000)
-#define S5P_PA_UART S5P6440_PA_UART
-#define S5P_VA_UART S3C_VA_UART
-/* HS USB OtG */
+#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800)
+#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00)
+
+#define S5P_SZ_UART SZ_256
+
+#define S5P6440_PA_IIC0 (0xEC104000)
+
#define S5P6440_PA_HSOTG (0xED100000)
-/* HSMMC */
#define S5P6440_PA_HSMMC0 (0xED800000)
#define S5P6440_PA_HSMMC1 (0xED900000)
#define S5P6440_PA_HSMMC2 (0xEDA00000)
-#define S5P_PA_UART0 (S5P_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5P_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5P_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5P_PA_UART + 0xC00)
-#define S5P_UART_OFFSET (0x400)
-
-#define S5P_VA_UARTx(x) (S5P_VA_UART + (S5P_PA_UART & 0xfffff) \
- + ((x) * S5P_UART_OFFSET))
-
-#define S5P_VA_UART0 S5P_VA_UARTx(0)
-#define S5P_VA_UART1 S5P_VA_UARTx(1)
-#define S5P_VA_UART2 S5P_VA_UARTx(2)
-#define S5P_VA_UART3 S5P_VA_UARTx(3)
-#define S5P_SZ_UART SZ_256
-
-/* I2C */
-#define S5P6440_PA_IIC0 (0xEC104000)
-#define S5P_PA_IIC0 S5P6440_PA_IIC0
-#define S5p_VA_IIC0 S3C_ADDR(0x00700000)
-
-/* SDRAM */
#define S5P6440_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5P6440_PA_SDRAM
/* compatibiltiy defines. */
-#define S3C_PA_UART S5P_PA_UART
-#define S3C_UART_OFFSET S5P_UART_OFFSET
-#define S3C_PA_TIMER S5P_PA_TIMER
-#define S3C_PA_IIC S5P_PA_IIC0
+#define S3C_PA_UART S5P6440_PA_UART
+#define S3C_PA_IIC S5P6440_PA_IIC0
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
index b7af283..c783ecc 100644
--- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
@@ -15,7 +15,7 @@
#include <mach/map.h>
-#define S5P_CLKREG(x) (S5P_VA_CLK + (x))
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
#define S5P_APLL_LOCK S5P_CLKREG(0x00)
#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
index 0815aeb..2f25c7f 100644
--- a/arch/arm/mach-s5p6440/include/mach/tick.h
+++ b/arch/arm/mach-s5p6440/include/mach/tick.h
@@ -15,7 +15,7 @@
static inline u32 s3c24xx_ostimer_pending(void)
{
- u32 pend = __raw_readl(S5P_VA_VIC0 + VIC_RAW_STATUS);
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
index 760ea54..3ae88f2 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -100,8 +100,8 @@ static void __init smdk6440_machine_init(void)
MACHINE_START(SMDK6440, "SMDK6440")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .phys_io = S5P_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S5P_VA_UART) >> 18) & 0xfffc,
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5p6440_init_irq,
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 0895a77..ee9c6b3 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -37,31 +37,34 @@ static struct cpu_table cpu_ids[] __initdata = {
/* minimal IO mapping */
-#define UART_OFFS (S5P_PA_UART & 0xfffff)
-
static struct map_desc s5p_iodesc[] __initdata = {
{
- .virtual = (unsigned long)S5P_VA_SYSCON,
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5P_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(S5P_PA_SYSCON),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)(S5P_VA_UART + UART_OFFS),
- .pfn = __phys_to_pfn(S5P_PA_UART),
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S3C_PA_UART),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_VIC0,
+ .virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S5P_PA_VIC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_VIC1,
+ .virtual = (unsigned long)VA_VIC1,
.pfn = __phys_to_pfn(S5P_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_TIMER,
+ .virtual = (unsigned long)S3C_VA_TIMER,
.pfn = __phys_to_pfn(S5P_PA_TIMER),
.length = SZ_16K,
.type = MT_DEVICE,
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 5d7937d..878acfe 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -29,6 +29,8 @@
#define S5P_VIC0_BASE S5P_IRQ(0)
#define S5P_VIC1_BASE S5P_IRQ(32)
+#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
+
#define IRQ_VIC0_BASE S5P_VIC0_BASE
#define IRQ_VIC1_BASE S5P_VIC1_BASE
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
new file mode 100644
index 0000000..3a10f8d
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5p-map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
+#define S5P_VA_GPIO S3C_ADDR(0x00500000)
+#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
+#define S5P_VA_SROMC S3C_ADDR(0x01100000)
+
+#define S5P_VA_UART0 (S3C_VA_UART + 0x0)
+#define S5P_VA_UART1 (S3C_VA_UART + 0x400)
+#define S5P_VA_UART2 (S3C_VA_UART + 0x800)
+#define S5P_VA_UART3 (S3C_VA_UART + 0xC00)
+
+#define S3C_UART_OFFSET (0x400)
+
+#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0 VA_VIC(0)
+#define VA_VIC1 VA_VIC(1)
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index eada40d..11535a5 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -25,9 +25,6 @@
#include <plat/irq-vic-timer.h>
#include <plat/irq-uart.h>
-#define VIC_VAADDR(no) (S5P_VA_VIC0 + ((no)*0x10000))
-#define VIC_BASE(no) (S5P_VIC0_BASE + ((no)*32))
-
/*
* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
* are consecutive when looking up the interrupt in the demux routines.
@@ -61,7 +58,7 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
/* initialize the VICs */
for (irq = 0; irq < num_vic; irq++)
- vic_init(VIC_VAADDR(irq), VIC_BASE(irq), vic[irq], 0);
+ vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
--
1.6.2.5
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v2] ARM: S5P6440: Move common memory map definitions for S5P to plat-s5p
2010-01-27 2:14 [PATCH v2] ARM: S5P6440: Move common memory map definitions for S5P to plat-s5p Kukjin Kim
@ 2010-01-27 5:02 ` Ben Dooks
0 siblings, 0 replies; 2+ messages in thread
From: Ben Dooks @ 2010-01-27 5:02 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-samsung-soc, ben-linux
On Wed, Jan 27, 2010 at 11:14:56AM +0900, Kukjin Kim wrote:
> This patch moves common memory map definitions for S5P such as S5P_VA_XXX
> into plat-s5p/include/mach/map-s5p.h from mach-s5p6440/include/mach.
> And this patch removes unnecessary definitions in the map.h and irq.c
You should have added a comment about fixing the seperate defines of
the VIC IRQ and VA bases whilst doing this as well as removing the
unnecessary supoort for unaligned UART addresses from the code.
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
> arch/arm/mach-s5p6440/include/mach/debug-macro.S | 4 +-
> arch/arm/mach-s5p6440/include/mach/map.h | 65 ++++-----------------
> arch/arm/mach-s5p6440/include/mach/regs-clock.h | 2 +-
> arch/arm/mach-s5p6440/include/mach/tick.h | 2 +-
> arch/arm/mach-s5p6440/mach-smdk6440.c | 4 +-
> arch/arm/plat-s5p/cpu.c | 19 ++++---
> arch/arm/plat-s5p/include/plat/irqs.h | 2 +
> arch/arm/plat-s5p/include/plat/map-s5p.h | 32 +++++++++++
> arch/arm/plat-s5p/irq.c | 5 +-
> 9 files changed, 65 insertions(+), 70 deletions(-)
> create mode 100644 arch/arm/plat-s5p/include/plat/map-s5p.h
>
> diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
> index f3a5d16..48cdb0d 100644
> --- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S
> +++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
> @@ -22,8 +22,8 @@
> .macro addruart, rx
> mrc p15, 0, \rx, c1, c0
> tst \rx, #1
> - ldreq \rx, = S5P_PA_UART
> - ldrne \rx, = (S5P_VA_UART + S5P_PA_UART & 0xfffff)
> + ldreq \rx, = S3C_PA_UART
> + ldrne \rx, = S3C_VA_UART
> #if CONFIG_DEBUG_S3C_UART != 0
> add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
> #endif
> diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
> index 4a73e73..8924e5a 100644
> --- a/arch/arm/mach-s5p6440/include/mach/map.h
> +++ b/arch/arm/mach-s5p6440/include/mach/map.h
> @@ -14,94 +14,55 @@
> #define __ASM_ARCH_MAP_H __FILE__
>
> #include <plat/map-base.h>
> +#include <plat/map-s5p.h>
>
> -/* Chip ID */
> #define S5P6440_PA_CHIPID (0xE0000000)
> #define S5P_PA_CHIPID S5P6440_PA_CHIPID
> -#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
>
> -/* SYSCON */
> #define S5P6440_PA_SYSCON (0xE0100000)
> -#define S5P_PA_SYSCON S5P6440_PA_SYSCON
> -#define S5P_VA_SYSCON S3C_VA_SYS
> -
> #define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0)
> -#define S5P_PA_CLK S5P6440_PA_CLK
> -#define S5P_VA_CLK (S5P_VA_SYSCON + 0x0)
> +#define S5P_PA_SYSCON S5P6440_PA_SYSCON
>
> -/* GPIO */
> #define S5P6440_PA_GPIO (0xE0308000)
> #define S5P_PA_GPIO S5P6440_PA_GPIO
> -#define S5P_VA_GPIO S3C_ADDR(0x00500000)
>
> -/* VIC0 */
> #define S5P6440_PA_VIC0 (0xE4000000)
> #define S5P_PA_VIC0 S5P6440_PA_VIC0
> -#define S5P_VA_VIC0 (S3C_VA_IRQ + 0x0)
> -#define VA_VIC0 S5P_VA_VIC0
>
> -/* VIC1 */
> #define S5P6440_PA_VIC1 (0xE4100000)
> #define S5P_PA_VIC1 S5P6440_PA_VIC1
> -#define S5P_VA_VIC1 (S3C_VA_IRQ + 0x10000)
> -#define VA_VIC1 S5P_VA_VIC1
>
> -/* Timer */
> #define S5P6440_PA_TIMER (0xEA000000)
> #define S5P_PA_TIMER S5P6440_PA_TIMER
> -#define S5P_VA_TIMER S3C_VA_TIMER
>
> -/* RTC */
> #define S5P6440_PA_RTC (0xEA100000)
> #define S5P_PA_RTC S5P6440_PA_RTC
> -#define S5P_VA_RTC S3C_ADDR(0x00600000)
>
> -/* WDT */
> #define S5P6440_PA_WDT (0xEA200000)
> #define S5P_PA_WDT S5P6440_PA_WDT
> -#define S5p_VA_WDT S3C_VA_WATCHDOG
>
> -/* UART */
> #define S5P6440_PA_UART (0xEC000000)
> -#define S5P_PA_UART S5P6440_PA_UART
> -#define S5P_VA_UART S3C_VA_UART
>
> -/* HS USB OtG */
> +#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0)
> +#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400)
> +#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800)
> +#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00)
> +
> +#define S5P_SZ_UART SZ_256
> +
> +#define S5P6440_PA_IIC0 (0xEC104000)
> +
> #define S5P6440_PA_HSOTG (0xED100000)
>
> -/* HSMMC */
> #define S5P6440_PA_HSMMC0 (0xED800000)
> #define S5P6440_PA_HSMMC1 (0xED900000)
> #define S5P6440_PA_HSMMC2 (0xEDA00000)
>
> -#define S5P_PA_UART0 (S5P_PA_UART + 0x0)
> -#define S5P_PA_UART1 (S5P_PA_UART + 0x400)
> -#define S5P_PA_UART2 (S5P_PA_UART + 0x800)
> -#define S5P_PA_UART3 (S5P_PA_UART + 0xC00)
> -#define S5P_UART_OFFSET (0x400)
> -
> -#define S5P_VA_UARTx(x) (S5P_VA_UART + (S5P_PA_UART & 0xfffff) \
> - + ((x) * S5P_UART_OFFSET))
> -
> -#define S5P_VA_UART0 S5P_VA_UARTx(0)
> -#define S5P_VA_UART1 S5P_VA_UARTx(1)
> -#define S5P_VA_UART2 S5P_VA_UARTx(2)
> -#define S5P_VA_UART3 S5P_VA_UARTx(3)
> -#define S5P_SZ_UART SZ_256
> -
> -/* I2C */
> -#define S5P6440_PA_IIC0 (0xEC104000)
> -#define S5P_PA_IIC0 S5P6440_PA_IIC0
> -#define S5p_VA_IIC0 S3C_ADDR(0x00700000)
> -
> -/* SDRAM */
> #define S5P6440_PA_SDRAM (0x20000000)
> #define S5P_PA_SDRAM S5P6440_PA_SDRAM
>
> /* compatibiltiy defines. */
> -#define S3C_PA_UART S5P_PA_UART
> -#define S3C_UART_OFFSET S5P_UART_OFFSET
> -#define S3C_PA_TIMER S5P_PA_TIMER
> -#define S3C_PA_IIC S5P_PA_IIC0
> +#define S3C_PA_UART S5P6440_PA_UART
> +#define S3C_PA_IIC S5P6440_PA_IIC0
>
> #endif /* __ASM_ARCH_MAP_H */
> diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
> index b7af283..c783ecc 100644
> --- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h
> +++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
> @@ -15,7 +15,7 @@
>
> #include <mach/map.h>
>
> -#define S5P_CLKREG(x) (S5P_VA_CLK + (x))
> +#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
>
> #define S5P_APLL_LOCK S5P_CLKREG(0x00)
> #define S5P_MPLL_LOCK S5P_CLKREG(0x04)
> diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
> index 0815aeb..2f25c7f 100644
> --- a/arch/arm/mach-s5p6440/include/mach/tick.h
> +++ b/arch/arm/mach-s5p6440/include/mach/tick.h
> @@ -15,7 +15,7 @@
>
> static inline u32 s3c24xx_ostimer_pending(void)
> {
> - u32 pend = __raw_readl(S5P_VA_VIC0 + VIC_RAW_STATUS);
> + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
> return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
> }
>
> diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
> index 760ea54..3ae88f2 100644
> --- a/arch/arm/mach-s5p6440/mach-smdk6440.c
> +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
> @@ -100,8 +100,8 @@ static void __init smdk6440_machine_init(void)
>
> MACHINE_START(SMDK6440, "SMDK6440")
> /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
> - .phys_io = S5P_PA_UART & 0xfff00000,
> - .io_pg_offst = (((u32)S5P_VA_UART) >> 18) & 0xfffc,
> + .phys_io = S3C_PA_UART & 0xfff00000,
> + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
> .boot_params = S5P_PA_SDRAM + 0x100,
>
> .init_irq = s5p6440_init_irq,
> diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
> index 0895a77..ee9c6b3 100644
> --- a/arch/arm/plat-s5p/cpu.c
> +++ b/arch/arm/plat-s5p/cpu.c
> @@ -37,31 +37,34 @@ static struct cpu_table cpu_ids[] __initdata = {
>
> /* minimal IO mapping */
>
> -#define UART_OFFS (S5P_PA_UART & 0xfffff)
> -
> static struct map_desc s5p_iodesc[] __initdata = {
> {
> - .virtual = (unsigned long)S5P_VA_SYSCON,
> + .virtual = (unsigned long)S5P_VA_CHIPID,
> + .pfn = __phys_to_pfn(S5P_PA_CHIPID),
> + .length = SZ_4K,
> + .type = MT_DEVICE,
> + }, {
> + .virtual = (unsigned long)S3C_VA_SYS,
> .pfn = __phys_to_pfn(S5P_PA_SYSCON),
> .length = SZ_64K,
> .type = MT_DEVICE,
> }, {
> - .virtual = (unsigned long)(S5P_VA_UART + UART_OFFS),
> - .pfn = __phys_to_pfn(S5P_PA_UART),
> + .virtual = (unsigned long)S3C_VA_UART,
> + .pfn = __phys_to_pfn(S3C_PA_UART),
> .length = SZ_4K,
> .type = MT_DEVICE,
> }, {
> - .virtual = (unsigned long)S5P_VA_VIC0,
> + .virtual = (unsigned long)VA_VIC0,
> .pfn = __phys_to_pfn(S5P_PA_VIC0),
> .length = SZ_16K,
> .type = MT_DEVICE,
> }, {
> - .virtual = (unsigned long)S5P_VA_VIC1,
> + .virtual = (unsigned long)VA_VIC1,
> .pfn = __phys_to_pfn(S5P_PA_VIC1),
> .length = SZ_16K,
> .type = MT_DEVICE,
> }, {
> - .virtual = (unsigned long)S5P_VA_TIMER,
> + .virtual = (unsigned long)S3C_VA_TIMER,
> .pfn = __phys_to_pfn(S5P_PA_TIMER),
> .length = SZ_16K,
> .type = MT_DEVICE,
> diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
> index 5d7937d..878acfe 100644
> --- a/arch/arm/plat-s5p/include/plat/irqs.h
> +++ b/arch/arm/plat-s5p/include/plat/irqs.h
> @@ -29,6 +29,8 @@
> #define S5P_VIC0_BASE S5P_IRQ(0)
> #define S5P_VIC1_BASE S5P_IRQ(32)
>
> +#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
> +
> #define IRQ_VIC0_BASE S5P_VIC0_BASE
> #define IRQ_VIC1_BASE S5P_VIC1_BASE
>
> diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
> new file mode 100644
> index 0000000..3a10f8d
> --- /dev/null
> +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
> @@ -0,0 +1,32 @@
> +/* linux/arch/arm/plat-s5p/include/plat/s5p-map.h
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * S5P - Memory map definitions
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef __ASM_PLAT_MAP_S5P_H
> +#define __ASM_PLAT_MAP_S5P_H __FILE__
> +
> +#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
> +#define S5P_VA_GPIO S3C_ADDR(0x00500000)
> +#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
> +#define S5P_VA_SROMC S3C_ADDR(0x01100000)
> +
> +#define S5P_VA_UART0 (S3C_VA_UART + 0x0)
> +#define S5P_VA_UART1 (S3C_VA_UART + 0x400)
> +#define S5P_VA_UART2 (S3C_VA_UART + 0x800)
> +#define S5P_VA_UART3 (S3C_VA_UART + 0xC00)
> +
> +#define S3C_UART_OFFSET (0x400)
> +
> +#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
> +#define VA_VIC0 VA_VIC(0)
> +#define VA_VIC1 VA_VIC(1)
> +
> +#endif /* __ASM_PLAT_MAP_S5P_H */
> diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
> index eada40d..11535a5 100644
> --- a/arch/arm/plat-s5p/irq.c
> +++ b/arch/arm/plat-s5p/irq.c
> @@ -25,9 +25,6 @@
> #include <plat/irq-vic-timer.h>
> #include <plat/irq-uart.h>
>
> -#define VIC_VAADDR(no) (S5P_VA_VIC0 + ((no)*0x10000))
> -#define VIC_BASE(no) (S5P_VIC0_BASE + ((no)*32))
> -
> /*
> * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
> * are consecutive when looking up the interrupt in the demux routines.
> @@ -61,7 +58,7 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
>
> /* initialize the VICs */
> for (irq = 0; irq < num_vic; irq++)
> - vic_init(VIC_VAADDR(irq), VIC_BASE(irq), vic[irq], 0);
> + vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
>
> s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
> s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
> --
> 1.6.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-01-27 5:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-27 2:14 [PATCH v2] ARM: S5P6440: Move common memory map definitions for S5P to plat-s5p Kukjin Kim
2010-01-27 5:02 ` Ben Dooks
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.