All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
To: alsa-devel@alsa-project.org
Cc: "broonie@opensource.wolfsonmicro.com"
	<broonie@opensource.wolfsonmicro.com>,
	"jy0922.shim@samsung.com" <jy0922.shim@samsung.com>,
	"x0052729@ti.com" <x0052729@ti.com>,
	"lrg@slimlogic.co.uk" <lrg@slimlogic.co.uk>
Subject: Re: [PATCH] ASoC: TWL4030: Add supply for audio serial interface control
Date: Tue, 9 Feb 2010 15:30:13 +0200	[thread overview]
Message-ID: <201002091530.13119.peter.ujfalusi@nokia.com> (raw)
In-Reply-To: <1265721844-5065-1-git-send-email-peter.ujfalusi@nokia.com>

Hello,

On Tuesday 09 February 2010 15:24:04 Ujfalusi Peter (Nokia-D/Tampere) wrote:
> The serial interface (TDM/I2S) for the audio block have been
> constantly enabled.
> Introduce a new DAPM_SUPPLY for handling the AIF_EN bit, so
> the interface is only enabled, when there is a need for it.
> For example when only the analog loopback is enabled, there
> is no need to keep the serial interface active.
> 
> I have added the persons who contributed to the Voice path
> of twl4030 codec driver, so they might have the ability
> to test this patch, and send an update for the Voice path,
> if it is necessary

I meant to place this part after the ---, so this should not be part of the 
commit message. Sorry about that, should I resend it?
Also, it seams that the email address for Misael Lopez at TI is no longer 
active...

-- 
Péter

> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
> ---
> 
> This patch has been tested in OPTION 1 mode, where the Voice
> path is not in use.
> I have looked for dependencies in the Voice path regarding to
> the Audio interface enable bit, but I have not found any.
> If someone could test, if the Voice path also needs the AIF_EN
> bit set, than please send a patch, which adds this new supply
> to the DAPM rule for the Voice path.
> 
>  sound/soc/codecs/twl4030.c |   14 +++++++++++++-
>  1 files changed, 13 insertions(+), 1 deletions(-)
> 
> diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
> index b32aeb3..277862e 100644
> --- a/sound/soc/codecs/twl4030.c
> +++ b/sound/soc/codecs/twl4030.c
> @@ -55,7 +55,7 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
>  	0x0c, /* REG_ATXR1PGA		(0xB)	*/
>  	0x00, /* REG_AVTXL2PGA		(0xC)	*/
>  	0x00, /* REG_AVTXR2PGA		(0xD)	*/
> -	0x01, /* REG_AUDIO_IF		(0xE)	*/
> +	0x00, /* REG_AUDIO_IF		(0xE)	*/
>  	0x00, /* REG_VOICE_IF		(0xF)	*/
>  	0x00, /* REG_ARXR1PGA		(0x10)	*/
>  	0x00, /* REG_ARXL1PGA		(0x11)	*/
> @@ -1203,6 +1203,8 @@ static const struct snd_soc_dapm_widget
>  twl4030_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("APLL Enable",
>  SND_SOC_NOPM, 0, 0, apll_event,
>  SND_SOC_DAPM_PRE_PMU|SND_SOC_DAPM_POST_PMD),
> 
> +	SND_SOC_DAPM_SUPPLY("AIF Enable", TWL4030_REG_AUDIO_IF, 0, 0, NULL, 0),
> +
>  	/* Output MIXER controls */
>  	/* Earpiece */
>  	SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
> @@ -1337,6 +1339,11 @@ static const struct snd_soc_dapm_route intercon[] =
>  { {"Digital L2 Playback Mixer", NULL, "APLL Enable"},
>  	{"Digital Voice Playback Mixer", NULL, "APLL Enable"},
> 
> +	{"Digital R1 Playback Mixer", NULL, "AIF Enable"},
> +	{"Digital L1 Playback Mixer", NULL, "AIF Enable"},
> +	{"Digital R2 Playback Mixer", NULL, "AIF Enable"},
> +	{"Digital L2 Playback Mixer", NULL, "AIF Enable"},
> +
>  	{"Analog L1 Playback Mixer", NULL, "Digital L1 Playback Mixer"},
>  	{"Analog R1 Playback Mixer", NULL, "Digital R1 Playback Mixer"},
>  	{"Analog L2 Playback Mixer", NULL, "Digital L2 Playback Mixer"},
> @@ -1455,6 +1462,11 @@ static const struct snd_soc_dapm_route intercon[] =
>  { {"ADC Virtual Left2", NULL, "APLL Enable"},
>  	{"ADC Virtual Right2", NULL, "APLL Enable"},
> 
> +	{"ADC Virtual Left1", NULL, "AIF Enable"},
> +	{"ADC Virtual Right1", NULL, "AIF Enable"},
> +	{"ADC Virtual Left2", NULL, "AIF Enable"},
> +	{"ADC Virtual Right2", NULL, "AIF Enable"},
> +
>  	/* Analog bypass routes */
>  	{"Right1 Analog Loopback", "Switch", "Analog Right"},
>  	{"Left1 Analog Loopback", "Switch", "Analog Left"},
> 

  reply	other threads:[~2010-02-09 13:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-09 13:24 [PATCH] ASoC: TWL4030: Add supply for audio serial interface control Peter Ujfalusi
2010-02-09 13:30 ` Peter Ujfalusi [this message]
2010-02-09 13:52   ` Mark Brown
2010-02-11 20:03   ` Misael Lopez
2010-02-10  0:11 ` Joonyoung Shim
2010-02-10 10:58 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201002091530.13119.peter.ujfalusi@nokia.com \
    --to=peter.ujfalusi@nokia.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=jy0922.shim@samsung.com \
    --cc=lrg@slimlogic.co.uk \
    --cc=x0052729@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.