From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org, Vaibhav Hiremath <hvaibhav@ti.com>
Subject: [PATCH 15/19] AM35xx: Update irq.h for AM35xx IPSS module interrupts
Date: Thu, 11 Feb 2010 16:51:43 -0800 [thread overview]
Message-ID: <20100212005143.24958.92584.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100212004844.24958.29506.stgit@baageli.muru.com>
From: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/include/plat/irqs.h | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c0ab7c8..90d8370 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -344,6 +344,16 @@
#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_35XX_HECC0_IRQ 24
+#define INT_35XX_HECC1_IRQ 28
+#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
+#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68
+#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
+#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
+#define INT_35XX_USBOTG_IRQ 71
+#define INT_35XX_CCDC_VD0_IRQ 88
+#define INT_35XX_CCDC_VD1_IRQ 92
+#define INT_35XX_CCDC_VD2_IRQ 93
#define IRQ_GIC_START 32
#define INT_44XX_LOCALTIMER_IRQ 29
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 15/19] AM35xx: Update irq.h for AM35xx IPSS module interrupts
Date: Thu, 11 Feb 2010 16:51:43 -0800 [thread overview]
Message-ID: <20100212005143.24958.92584.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100212004844.24958.29506.stgit@baageli.muru.com>
From: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/include/plat/irqs.h | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c0ab7c8..90d8370 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -344,6 +344,16 @@
#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_35XX_HECC0_IRQ 24
+#define INT_35XX_HECC1_IRQ 28
+#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
+#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68
+#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
+#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
+#define INT_35XX_USBOTG_IRQ 71
+#define INT_35XX_CCDC_VD0_IRQ 88
+#define INT_35XX_CCDC_VD1_IRQ 92
+#define INT_35XX_CCDC_VD2_IRQ 93
#define IRQ_GIC_START 32
#define INT_44XX_LOCALTIMER_IRQ 29
next prev parent reply other threads:[~2010-02-12 0:51 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-12 0:51 [PATCH 00/19] omap updates for 2.6.34 merge window, part 2 Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 01/19] omap_hsmmc: Move gpio and regulator control from board file Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 02/19] omap: Rename mmc-twl4030 files to hsmmc Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 03/19] omap: Rename hsmmc symbols to reflect independence from twl4030 Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 04/19] omap: Reconnect hsmmc context loss count Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 05/19] omap: RX51: Remux to pull eMMC lines down when powering off Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 06/19] omap_hsmmc: Allow for power saving without going off Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 07/19] omap_hsmmc: Fix disable timeouts Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 08/19] omap_hsmmc: Ensure regulator enable / disable are paired Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 09/19] omap_hsmmc: Allow for a shared VccQ Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 10/19] omap_hsmmc: allow compile without regulator framework Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 11/19] omap3: Clean-up for omap_mux_init Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 12/19] omap3: pm: Add T2 Keypad as a wakeup source Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 13/19] AM35xx: Introduce am35xx.h file Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 14/19] AM35xx: Add AM35xx intr_clr & sw_rst cntrl reg bit definition Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren [this message]
2010-02-12 0:51 ` [PATCH 15/19] AM35xx: Update irq.h for AM35xx IPSS module interrupts Tony Lindgren
2010-02-12 0:51 ` [PATCH 16/19] arm: omap: kill compile warning on board-4430-sdp.c Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 17/19] OMAP4: IRQ: Add McPDM IRQ definition Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 18/19] ARM: OMAP4: Add McPDM base address Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
2010-02-12 0:51 ` [PATCH 19/19] OMAP4: MCPDM: Register McPDM platform device Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100212005143.24958.92584.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=hvaibhav@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.