* pciback doesn't seize device, but no error either.
@ 2010-02-14 12:45 Sander Eikelenboom
2010-02-14 14:37 ` pciback doesn't seize device, but no error either. (solved, forgot to rename to xen-pciback.hide) Sander Eikelenboom
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Sander Eikelenboom @ 2010-02-14 12:45 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel@lists.xensource.com
[-- Attachment #1: Type: text/plain, Size: 432 bytes --]
Hi Konrad,
I'm trying to passthrough a secondary gfx device(intel IGD) (with patches from Han Weidong).
Intel VT-D is enabled, pciback + pciback debug compiled in.
But some how pciback refuses to seize the device, but i don't see an error either.
Attached:
- xm info
- xm dmesg
- dmesg
- lspci -vvvknn
Any ideas on what it might be ?
--
Best regards,
Sander mailto:linux@eikelenboom.it
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 85521 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.6 (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Sun Feb 14 05:18:49 CET 2010
[ 0.000000] Command line: root=/dev/sda1 ro earlyprintk=xen pciback.hide=(0000:00:02.0)(0000:00:02.1) reassigndev=0000:00:02.0,0000:00:02.1 reassign_resources
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 20000-7cb70
[ 0.000000] xen_release_chunk: looking at area pfn 7cc00-fec00
[ 0.000000] xen_release_chunk: looking at area pfn fec01-fed00
[ 0.000000] xen_release_chunk: looking at area pfn fed15-fed20
[ 0.000000] xen_release_chunk: looking at area pfn fed40-fee00
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ffe00
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 000000007cb70000 - 000000007cb7e000 (ACPI data)
[ 0.000000] Xen: 000000007cb7e000 - 000000007cbd0000 (ACPI NVS)
[ 0.000000] Xen: 000000007cbd0000 - 000000007cc00000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] Xen: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] Xen: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] modified: 000000007cb70000 - 000000007cb7e000 (ACPI data)
[ 0.000000] modified: 000000007cb7e000 - 000000007cbd0000 (ACPI NVS)
[ 0.000000] modified: 000000007cbd0000 - 000000007cc00000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed01100 (reserved)
[ 0.000000] modified: 00000000fed02000 - 00000000fed14c00 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] 0000000000 - 0020000000 page 4k
[ 0.000000] kernel direct mapping tables up to 20000000 @ 100000-202000
[ 0.000000] RAMDISK: 01b4d000 - 021fca00
[ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000007cb70100 00064 (v01 A_M_I_ OEMXSDT 05000927 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007cb70290 000F4 (v03 A_M_I_ OEMFACP 05000927 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007cb70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007cb7e000 00040
[ 0.000000] ACPI: APIC 000000007cb70390 0006C (v01 A_M_I_ OEMAPIC 05000927 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007cb70400 0003C (v01 A_M_I_ OEMMCFG 05000927 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007cb7e040 00089 (v01 A_M_I_ AMI_OEM 05000927 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007cb78860 00038 (v01 A_M_I_ OEMHPET 05000927 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007cb7e0d0 02024 (v01 A_M_I_ GMCHSCI 05000927 MSFT 00000097)
[ 0.000000] ACPI: 000000007cb80100 00168 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007cb811e0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [00022fe000 - 0002313000] XEN PAGETABLES ==> [00022fe000 - 0002313000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001b2c134] TEXT DATA BSS ==> [0001000000 - 0001b2c134]
[ 0.000000] #4 [0001b4d000 - 00021fca00] RAMDISK ==> [0001b4d000 - 00021fca00]
[ 0.000000] #5 [00021fd000 - 00022fe000] XEN START INFO ==> [00021fd000 - 00022fe000]
[ 0.000000] #6 [0001b2d000 - 0001b2d298] BRK ==> [0001b2d000 - 0001b2d298]
[ 0.000000] #7 [0000100000 - 00001ea000] PGTABLE ==> [0000100000 - 00001ea000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] On node 0 totalpages: 130959
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 237 pages reserved
[ 0.000000] DMA zone: 3690 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1736 pages used for memmap
[ 0.000000] DMA32 zone: 125240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7cc00000 (gap: 7cc00000:82000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 22 4k pages, static data 88160 bytes
[ 0.000000] trying to map vcpu_info 0 at ffffc9000000b060, mfn 76327, offset 96
[ 0.000000] cpu 0 using vcpu_info at ffffc9000000b060
[ 0.000000] trying to map vcpu_info 1 at ffffc90000023060, mfn 7633d, offset 96
[ 0.000000] cpu 1 using vcpu_info at ffffc90000023060
[ 0.000000] trying to map vcpu_info 2 at ffffc9000003b060, mfn 76353, offset 96
[ 0.000000] cpu 2 using vcpu_info at ffffc9000003b060
[ 0.000000] trying to map vcpu_info 3 at ffffc90000053060, mfn 76369, offset 96
[ 0.000000] cpu 3 using vcpu_info at ffffc90000053060
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128930
[ 0.000000] Kernel command line: root=/dev/sda1 ro earlyprintk=xen pciback.hide=(0000:00:02.0)(0000:00:02.1) reassigndev=0000:00:02.0,0000:00:02.1 reassign_resources
[ 0.000000] Unknown boot option `pciback.hide=(0000:00:02.0)(0000:00:02.1)': ignoring
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB)
[ 0.000000] xen_swiotlb_fixup: buf=ffff880002e14000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880006e74000 size=32768
[ 0.000000] Placing 64MB Xen software IO TLB between ffff880002e14000 - ffff880006e14000
[ 0.000000] Xen software IO TLB at phys 0x2e14000 - 0x6e14000
[ 0.000000] Memory: 428676k/524288k available (5979k kernel code, 452k absent, 94676k reserved, 3796k data, 532k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] xen: registering gsi 0 triggering 1 polarity 0
[ 0.000000] xen: --> irq=0
[ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 1 triggering 1 polarity 0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 3 triggering 1 polarity 0
[ 0.000000] xen: --> irq=3
[ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 4 triggering 1 polarity 0
[ 0.000000] xen: --> irq=4
[ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 5 triggering 1 polarity 0
[ 0.000000] xen: --> irq=5
[ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 6 triggering 1 polarity 0
[ 0.000000] xen: --> irq=6
[ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 7 triggering 1 polarity 0
[ 0.000000] xen: --> irq=7
[ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 8 triggering 1 polarity 0
[ 0.000000] xen: --> irq=8
[ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen: --> irq=9
[ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0
[ 0.000000] xen: registering gsi 10 triggering 1 polarity 0
[ 0.000000] xen: --> irq=10
[ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 11 triggering 1 polarity 0
[ 0.000000] xen: --> irq=11
[ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 12 triggering 1 polarity 0
[ 0.000000] xen: --> irq=12
[ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 13 triggering 1 polarity 0
[ 0.000000] xen: --> irq=13
[ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 14 triggering 1 polarity 0
[ 0.000000] xen: --> irq=14
[ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0
[ 0.000000] xen: registering gsi 15 triggering 1 polarity 0
[ 0.000000] xen: --> irq=15
[ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0
[ 0.000000] Detected 2666.422 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [tty0]
[ 0.000999] Xen: using vcpuop timer interface
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] alloc irq_desc for 439 on node 0
[ 0.000999] alloc kstat_irqs on node 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.84 BogoMIPS (lpj=2666422)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 256
[ 0.000999] Initializing cgroup subsys ns
[ 0.000999] Initializing cgroup subsys cpuacct
[ 0.000999] Initializing cgroup subsys freezer
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 3072K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] mce: CPU supports 6 MCE banks
[ 0.000999] Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only.
[ 0.000999] SMP alternatives: switching to UP code
[ 0.002215] ACPI: Core revision 20090521
[ 0.016570] alloc irq_desc for 438 on node 0
[ 0.016573] alloc kstat_irqs on node 0
[ 0.016579] alloc irq_desc for 437 on node 0
[ 0.016581] alloc kstat_irqs on node 0
[ 0.016586] alloc irq_desc for 436 on node 0
[ 0.016588] alloc kstat_irqs on node 0
[ 0.016592] alloc irq_desc for 435 on node 0
[ 0.016595] alloc kstat_irqs on node 0
[ 0.016768] installing Xen timer for CPU 1
[ 0.016822] alloc irq_desc for 434 on node 0
[ 0.016825] alloc kstat_irqs on node 0
[ 0.016855] SMP alternatives: switching to SMP code
[ 0.018997] alloc irq_desc for 433 on node 0
[ 0.018997] alloc kstat_irqs on node 0
[ 0.019003] alloc irq_desc for 432 on node 0
[ 0.019005] alloc kstat_irqs on node 0
[ 0.019011] alloc irq_desc for 431 on node 0
[ 0.019013] alloc kstat_irqs on node 0
[ 0.019017] alloc irq_desc for 430 on node 0
[ 0.019019] alloc kstat_irqs on node 0
[ 0.000008] Initializing CPU#1
[ 0.000045] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000048] CPU: L2 cache: 3072K
[ 0.000051] CPU: Physical Processor ID: 0
[ 0.000052] CPU: Processor Core ID: 1
[ 0.000055] mce: CPU supports 6 MCE banks
[ 0.019156] installing Xen timer for CPU 2
[ 0.019948] alloc irq_desc for 429 on node 0
[ 0.019950] alloc kstat_irqs on node 0
[ 0.019974] alloc irq_desc for 428 on node 0
[ 0.019976] alloc kstat_irqs on node 0
[ 0.019982] alloc irq_desc for 427 on node 0
[ 0.019984] alloc kstat_irqs on node 0
[ 0.019989] alloc irq_desc for 426 on node 0
[ 0.019991] alloc kstat_irqs on node 0
[ 0.019996] alloc irq_desc for 425 on node 0
[ 0.019996] alloc kstat_irqs on node 0
[ 0.000018] Initializing CPU#2
[ 0.000071] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000073] CPU: L2 cache: 3072K
[ 0.000077] CPU: Physical Processor ID: 0
[ 0.000078] CPU: Processor Core ID: 2
[ 0.000081] mce: CPU supports 6 MCE banks
[ 0.020187] installing Xen timer for CPU 3
[ 0.021001] alloc irq_desc for 424 on node 0
[ 0.021004] alloc kstat_irqs on node 0
[ 0.021036] alloc irq_desc for 423 on node 0
[ 0.021038] alloc kstat_irqs on node 0
[ 0.021044] alloc irq_desc for 422 on node 0
[ 0.021046] alloc kstat_irqs on node 0
[ 0.021052] alloc irq_desc for 421 on node 0
[ 0.021054] alloc kstat_irqs on node 0
[ 0.021058] alloc irq_desc for 420 on node 0
[ 0.021060] alloc kstat_irqs on node 0
[ 0.000008] Initializing CPU#3
[ 0.000044] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000046] CPU: L2 cache: 3072K
[ 0.000049] CPU: Physical Processor ID: 0
[ 0.000051] CPU: Processor Core ID: 3
[ 0.000053] mce: CPU supports 6 MCE banks
[ 0.021154] Brought up 4 CPUs
[ 0.022175] Booting paravirtualized kernel on Xen
[ 0.022249] Xen version: 4.0.0-rc3-pre (preserve-AD) (dom0)
[ 0.023037] Grant tables using version 2 layout.
[ 0.023274] Grant table initialized
[ 0.023531] Time: 4:34:52 Date: 02/14/10
[ 0.023827] NET: Registered protocol family 16
[ 0.024050] alloc irq_desc for 419 on node 0
[ 0.024050] alloc kstat_irqs on node 0
[ 0.024050] xenbus_probe_init ok
[ 0.025052] ACPI: bus type pci registered
[ 0.025286] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.025286] PCI: Not using MMCONFIG.
[ 0.025461] PCI: Using configuration type 1 for base access
[ 0.045033] bio: create slab <bio-0> at 0
[ 0.047776] ACPI: EC: Look up EC in DSDT
[ 0.064278] ACPI: Interpreter enabled
[ 0.064517] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.064950] ACPI: Using IOAPIC for interrupt routing
[ 0.065046] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.069004] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.119672] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.135141] ACPI Warning: Incorrect checksum in table [OEMB] - C5, should be BC 20090521 tbutils-246
[ 0.136436] ACPI Warning: Incorrect checksum in table [ ] - C8, should be 0C 20090521 tbutils-246
[ 0.137092] ACPI: No dock devices found.
[ 0.137497] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.137772] PCI: Scanning bus 0000:00
[ 0.137772] pci 0000:00:00.0: found [8086:2e10] class 000600 header type 00
[ 0.137772] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.137772] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.137772] pci 0000:00:02.0: found [8086:2e12] class 000380 header type 00
[ 0.137772] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
[ 0.137772] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.137772] pci 0000:00:02.0: reg 20 io port: [0xcc00-0xcc07]
[ 0.137772] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.137772] pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.137997] pci 0000:00:02.1: found [8086:2e13] class 000380 header type 00
[ 0.138025] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
[ 0.138080] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1b5
[ 0.138083] pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.138158] pci 0000:00:03.0: found [8086:2e14] class 000780 header type 00
[ 0.138229] pci 0000:00:03.0: reg 10 64bit mmio: [0xfe8fb000-0xfe8fb00f]
[ 0.138290] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.138293] pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.138338] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.138580] pci 0000:00:03.0: PME# disabled
[ 0.138898] pci 0000:00:19.0: found [8086:10de] class 000200 header type 00
[ 0.138949] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe8c0000-0xfe8dffff]
[ 0.138960] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe8fa000-0xfe8fafff]
[ 0.138970] pci 0000:00:19.0: reg 18 io port: [0xc880-0xc89f]
[ 0.138978] pci 0000:00:19.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.138978] pci 0000:00:19.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.138978] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.138978] pci 0000:00:19.0: PME# disabled
[ 0.138999] pci 0000:00:1a.0: found [8086:3a67] class 000c03 header type 00
[ 0.139087] pci 0000:00:1a.0: reg 20 io port: [0xc400-0xc41f]
[ 0.139110] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.139113] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.139166] pci 0000:00:1a.1: found [8086:3a68] class 000c03 header type 00
[ 0.139240] pci 0000:00:1a.1: reg 20 io port: [0xc480-0xc49f]
[ 0.139263] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x1b5
[ 0.139266] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.139328] pci 0000:00:1a.2: found [8086:3a69] class 000c03 header type 00
[ 0.139396] pci 0000:00:1a.2: reg 20 io port: [0xc800-0xc81f]
[ 0.139419] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.139422] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.139490] pci 0000:00:1a.7: found [8086:3a6c] class 000c03 header type 00
[ 0.139538] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8f9000-0xfe8f93ff]
[ 0.139607] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x1b5
[ 0.139610] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.139665] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.139873] pci 0000:00:1a.7: PME# disabled
[ 0.140009] pci 0000:00:1b.0: found [8086:3a6e] class 000403 header type 00
[ 0.140044] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f0000-0xfe8f3fff]
[ 0.140096] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.140099] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.140152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.140368] pci 0000:00:1b.0: PME# disabled
[ 0.140630] pci 0000:00:1c.0: found [8086:3a70] class 000604 header type 01
[ 0.140666] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.140669] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.140717] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.140943] pci 0000:00:1c.0: PME# disabled
[ 0.141004] pci 0000:00:1c.4: found [8086:3a78] class 000604 header type 01
[ 0.141053] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x1b5
[ 0.141056] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.141108] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.141348] pci 0000:00:1c.4: PME# disabled
[ 0.141600] pci 0000:00:1d.0: found [8086:3a64] class 000c03 header type 00
[ 0.141674] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f]
[ 0.141705] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.141708] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.141777] pci 0000:00:1d.1: found [8086:3a65] class 000c03 header type 00
[ 0.141845] pci 0000:00:1d.1: reg 20 io port: [0xc000-0xc01f]
[ 0.141868] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x1b5
[ 0.141871] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.141923] pci 0000:00:1d.2: found [8086:3a66] class 000c03 header type 00
[ 0.141978] pci 0000:00:1d.2: reg 20 io port: [0xc080-0xc09f]
[ 0.142002] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.142005] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.142085] pci 0000:00:1d.7: found [8086:3a6a] class 000c03 header type 00
[ 0.142140] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8f8000-0xfe8f83ff]
[ 0.142197] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x1b5
[ 0.142200] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.142246] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.142491] pci 0000:00:1d.7: PME# disabled
[ 0.142769] pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01
[ 0.142819] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.142822] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.142874] pci 0000:00:1f.0: found [8086:3a14] class 000601 header type 00
[ 0.142970] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.142973] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.143003] pci 0000:00:1f.2: found [8086:3a00] class 000101 header type 00
[ 0.143051] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.143060] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.143070] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.143080] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.143090] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f]
[ 0.143099] pci 0000:00:1f.2: reg 24 io port: [0xffa0-0xffaf]
[ 0.143123] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.143126] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.143179] pci 0000:00:1f.3: found [8086:3a60] class 000c05 header type 00
[ 0.143208] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8ef000-0xfe8ef0ff]
[ 0.143233] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.143255] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x1b5
[ 0.143258] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.143301] pci 0000:00:1f.5: found [8086:3a06] class 000101 header type 00
[ 0.143345] pci 0000:00:1f.5: reg 10 io port: [0xb880-0xb887]
[ 0.143355] pci 0000:00:1f.5: reg 14 io port: [0xb800-0xb803]
[ 0.143365] pci 0000:00:1f.5: reg 18 io port: [0xb480-0xb487]
[ 0.143387] pci 0000:00:1f.5: reg 1c io port: [0xb400-0xb403]
[ 0.143397] pci 0000:00:1f.5: reg 20 io port: [0xb080-0xb08f]
[ 0.143407] pci 0000:00:1f.5: reg 24 io port: [0xb000-0xb00f]
[ 0.143423] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x1b5
[ 0.143426] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.143481] PCI: Fixups for bus 0000:00
[ 0.143486] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0
[ 0.143494] PCI: Scanning bus 0000:02
[ 0.143562] PCI: Fixups for bus 0000:02
[ 0.143580] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
[ 0.143582] PCI: Bus scan for 0000:02 returning with max=02
[ 0.143589] pci 0000:00:1c.4: scanning behind bridge, config 010100, pass 0
[ 0.143597] PCI: Scanning bus 0000:01
[ 0.143627] pci 0000:01:00.0: found [11ab:6101] class 000101 header type 00
[ 0.143671] pci 0000:01:00.0: reg 10 io port: [0xdc00-0xdc07]
[ 0.143684] pci 0000:01:00.0: reg 14 io port: [0xd880-0xd883]
[ 0.143696] pci 0000:01:00.0: reg 18 io port: [0xd800-0xd807]
[ 0.143717] pci 0000:01:00.0: reg 1c io port: [0xd480-0xd483]
[ 0.143735] pci 0000:01:00.0: reg 20 io port: [0xd400-0xd40f]
[ 0.143748] pci 0000:01:00.0: reg 24 32bit mmio: [0xfeaff000-0xfeaff1ff]
[ 0.143769] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.143824] pci 0000:01:00.0: supports D1
[ 0.143826] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.143978] pci 0000:01:00.0: PME# disabled
[ 0.144066] PCI: Fixups for bus 0000:01
[ 0.144072] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.144078] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.144088] PCI: Bus scan for 0000:01 returning with max=01
[ 0.144094] pci 0000:00:1e.0: scanning behind bridge, config 030300, pass 0
[ 0.144107] PCI: Scanning bus 0000:03
[ 0.144131] pci 0000:03:00.0: found [1039:6326] class 000300 header type 00
[ 0.144164] pci 0000:03:00.0: reg 10 32bit mmio: [0xfd800000-0xfdffffff]
[ 0.144175] pci 0000:03:00.0: reg 14 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.144193] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.144229] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebeffff]
[ 0.144238] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.144265] pci 0000:03:00.0: supports D2
[ 0.144300] pci 0000:03:03.0: found [11c1:5811] class 000c00 header type 00
[ 0.144332] pci 0000:03:03.0: reg 10 32bit mmio: [0xfebdf000-0xfebdffff]
[ 0.144402] pci 0000:03:03.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.144437] pci 0000:03:03.0: supports D1 D2
[ 0.144440] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.144660] pci 0000:03:03.0: PME# disabled
[ 0.144962] PCI: Fixups for bus 0000:03
[ 0.144964] pci 0000:00:1e.0: transparent bridge
[ 0.144977] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.144977] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.144977] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd800000-0xfdffffff]
[ 0.144977] PCI: Bus scan for 0000:03 returning with max=03
[ 0.144977] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1
[ 0.144977] pci 0000:00:1c.4: scanning behind bridge, config 010100, pass 1
[ 0.144977] pci 0000:00:1e.0: scanning behind bridge, config 030300, pass 1
[ 0.144977] PCI: Bus scan for 0000:00 returning with max=03
[ 0.144977] pci_bus 0000:00: on NUMA node 0
[ 0.144977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.145300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.145425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.145527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.174086] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.174823] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.174973] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.174973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.174973] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.174973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.174973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.174973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.175016] sync cpu 0 get result 1 max_id 3
[ 0.175016] sync cpu 1 get result 1 max_id 3
[ 0.175016] sync cpu 2 get result 1 max_id 3
[ 0.175016] sync cpu 3 get result 1 max_id 3
[ 0.175016] alloc irq_desc for 418 on node 0
[ 0.175016] alloc kstat_irqs on node 0
[ 0.175016] xenbus_probe_backend_init bus registered ok
[ 0.175982] xenbus_probe_frontend_init bus registered ok
[ 0.176196] xen_balloon: Initialising balloon driver with page order 0.
[ 0.176994] SCSI subsystem initialized
[ 0.177204] libata version 3.00 loaded.
[ 0.177204] usbcore: registered new interface driver usbfs
[ 0.177990] usbcore: registered new interface driver hub
[ 0.178239] usbcore: registered new device driver usb
[ 0.179011] PCI: Using ACPI for IRQ routing
[ 0.179392] IO APIC resources couldn't be allocated.
[ 0.196014] cfg80211: Using static regulatory domain info
[ 0.196196] cfg80211: Regulatory domain: US
[ 0.196411] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.196846] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.196969] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.196969] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.196969] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.196969] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.196969] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.196979] cfg80211: Calling CRDA for country: US
[ 0.197187] NetLabel: Initializing
[ 0.197187] NetLabel: domain hash size = 128
[ 0.197384] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197596] NetLabel: unlabeled traffic allowed by default
[ 0.198977] Switched to high resolution mode on CPU 0
[ 0.199120] Switched to high resolution mode on CPU 2
[ 0.199351] Switched to high resolution mode on CPU 1
[ 0.199540] Switched to high resolution mode on CPU 3
[ 0.205023] pnp: PnP ACPI init
[ 0.205286] ACPI: bus type pnp registered
[ 0.206224] xen: registering gsi 8 triggering 1 polarity 0
[ 0.206232] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.206479] xen: --> irq=8
[ 0.206482] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0
[ 0.207128] xen: registering gsi 13 triggering 1 polarity 0
[ 0.207131] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.207362] xen: --> irq=13
[ 0.207365] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0
[ 0.208704] xen: registering gsi 6 triggering 1 polarity 0
[ 0.208706] xen_allocate_pirq: returning irq 6 for gsi 6
[ 0.208932] xen: --> irq=6
[ 0.208934] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0
[ 0.211712] xen: registering gsi 4 triggering 1 polarity 0
[ 0.211715] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.211910] xen: --> irq=4
[ 0.211912] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0
[ 0.212861] xen: registering gsi 1 triggering 1 polarity 0
[ 0.212863] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.213072] xen: --> irq=1
[ 0.213075] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0
[ 0.213760] xen: registering gsi 12 triggering 1 polarity 0
[ 0.213763] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.213976] xen: --> irq=12
[ 0.213978] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0
[ 0.215755] pnp: PnP ACPI: found 18 devices
[ 0.215982] ACPI: ACPI bus type pnp unregistered
[ 0.216238] system 00:01: iomem range 0xfed14000-0xfed19fff could not be reserved
[ 0.216371] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.216371] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.216371] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.216371] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.216371] system 00:08: ioport range 0x500-0x57f has been reserved
[ 0.216371] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.216371] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.216371] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.216371] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.216371] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.216371] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.216371] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.216371] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.216371] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[ 0.216371] system 00:11: iomem range 0xc0000-0xcffff could not be reserved
[ 0.216371] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[ 0.216371] system 00:11: iomem range 0x100000-0x7cbfffff could not be reserved
[ 0.216371] system 00:11: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.221171] pciback 0000:00:00.0: probing...
[ 0.221179] pciback 0000:00:02.0: probing...
[ 0.221186] pciback 0000:00:02.1: probing...
[ 0.221193] pciback 0000:00:03.0: probing...
[ 0.221200] pciback 0000:00:19.0: probing...
[ 0.221206] pciback 0000:00:1a.0: probing...
[ 0.221213] pciback 0000:00:1a.1: probing...
[ 0.221224] pciback 0000:00:1a.2: probing...
[ 0.221235] pciback 0000:00:1a.7: probing...
[ 0.221242] pciback 0000:00:1b.0: probing...
[ 0.221248] pciback 0000:00:1c.0: probing...
[ 0.221258] pciback 0000:00:1c.4: probing...
[ 0.221265] pciback 0000:00:1d.0: probing...
[ 0.221274] pciback 0000:00:1d.1: probing...
[ 0.221280] pciback 0000:00:1d.2: probing...
[ 0.221287] pciback 0000:00:1d.7: probing...
[ 0.221294] pciback 0000:00:1e.0: probing...
[ 0.221300] pciback 0000:00:1f.0: probing...
[ 0.221307] pciback 0000:00:1f.2: probing...
[ 0.221314] pciback 0000:00:1f.3: probing...
[ 0.221321] pciback 0000:00:1f.5: probing...
[ 0.221333] pciback 0000:01:00.0: probing...
[ 0.221339] pciback 0000:03:00.0: probing...
[ 0.221346] pciback 0000:03:03.0: probing...
[ 0.227438] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.227686] pci 0000:03:00.0: BAR 6: address space collision on of device [0xfebe0000-0xfebeffff]
[ 0.228002] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.228002] pci 0000:00:1c.0: IO window: disabled
[ 0.228002] pci 0000:00:1c.0: MEM window: disabled
[ 0.228002] pci 0000:00:1c.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[ 0.228002] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:01
[ 0.228002] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.228002] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.228002] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.228002] pci 0000:03:00.0: BAR 6: got res [0xfeb00000-0xfeb0ffff] bus [0xfeb00000-0xfeb0ffff] flags 0x27200
[ 0.228002] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.228002] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.228002] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.228002] pci 0000:00:1e.0: PREFETCH window: 0x000000fd800000-0x000000fdffffff
[ 0.228002] xen: registering gsi 17 triggering 0 polarity 1
[ 0.228002] alloc irq_desc for 17 on node 0
[ 0.228002] alloc kstat_irqs on node 0
[ 0.231274] xen: --> irq=17
[ 0.231277] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1
[ 0.231691] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.231919] pci 0000:00:1c.0: setting latency timer to 64
[ 0.231930] xen: registering gsi 17 triggering 0 polarity 1
[ 0.231933] xen_allocate_pirq: returning irq 17 for gsi 17
[ 0.232144] xen: --> irq=17
[ 0.232147] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1
[ 0.232264] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.232264] pci 0000:00:1c.4: setting latency timer to 64
[ 0.232264] pci 0000:00:1e.0: setting latency timer to 64
[ 0.232264] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.232264] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.232264] pci_bus 0000:02: resource 2 pref mem [0xfd700000-0xfd7fffff]
[ 0.232264] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.232264] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.232264] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.232264] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.232264] pci_bus 0000:03: resource 2 pref mem [0xfd800000-0xfdffffff]
[ 0.232264] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.232264] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.232883] NET: Registered protocol family 2
[ 0.233172] IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.233634] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.234431] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.235041] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.235274] TCP reno registered
[ 0.235587] NET: Registered protocol family 1
[ 0.235893] Trying to unpack rootfs image as initramfs...
[ 0.244983] Freeing initrd memory: 6846k freed
[ 0.248028] kvm: no hardware support
[ 0.248279] has_svm: not amd
[ 0.248491] kvm: no hardware support
[ 0.252875] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.253280] Scanning for low memory corruption every 60 seconds
[ 0.254089] audit: initializing netlink socket (disabled)
[ 0.254313] type=2000 audit(1266122092.834:1): initialized
[ 0.262119] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268092] VFS: Disk quotas dquot_6.5.2
[ 0.273054] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.275890] msgmni has been set to 851
[ 0.276284] SELinux: Registering netfilter hooks
[ 0.276919] alg: No test for stdrng (krng)
[ 0.277353] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.277747] io scheduler noop registered
[ 0.277966] io scheduler anticipatory registered
[ 0.278176] io scheduler deadline registered
[ 0.278438] io scheduler cfq registered (default)
[ 0.278696] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278701] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278704] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278707] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.278712] pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278715] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278718] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278721] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xbb
[ 0.278725] pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278727] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278730] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278733] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xbb
[ 0.278737] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278740] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278743] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278746] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xbb
[ 0.278750] pci 0000:00:19.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278753] pci 0000:00:19.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278756] pci 0000:00:19.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278758] pci 0000:00:19.0: calling pci_fixup_video+0x0/0xbb
[ 0.278763] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278765] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278768] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278780] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.278782] pci 0000:00:1a.0: Performing full reset
[ 0.278798] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xbb
[ 0.278802] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278805] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278808] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278816] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.278818] pci 0000:00:1a.1: Performing full reset
[ 0.278833] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xbb
[ 0.278837] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278840] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278843] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278850] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.278853] pci 0000:00:1a.2: Performing full reset
[ 0.278870] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xbb
[ 0.278874] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278877] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278880] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278915] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xbb
[ 0.278920] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278923] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278926] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278929] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xbb
[ 0.278933] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278936] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278938] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278941] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xbb
[ 0.278945] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278948] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278951] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278954] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xbb
[ 0.278958] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278961] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278964] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.278971] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.278973] pci 0000:00:1d.0: Performing full reset
[ 0.278988] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xbb
[ 0.278993] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x18f
[ 0.278996] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.278998] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279013] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.279015] pci 0000:00:1d.1: Performing full reset
[ 0.279030] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xbb
[ 0.279042] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x18f
[ 0.279045] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279048] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279056] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.279058] pci 0000:00:1d.2: Performing full reset
[ 0.279073] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xbb
[ 0.279077] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x18f
[ 0.279080] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279083] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279100] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xbb
[ 0.279105] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.279108] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279110] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279113] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xbb
[ 0.279117] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x18f
[ 0.279120] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279123] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279126] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xbb
[ 0.279130] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x18f
[ 0.279133] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279136] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279138] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xbb
[ 0.279142] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x18f
[ 0.279145] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279148] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279151] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xbb
[ 0.279155] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x18f
[ 0.279158] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279161] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279163] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xbb
[ 0.279167] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279170] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279173] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.279177] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279181] pci 0000:03:00.0: calling quirk_ioapic_rmw+0x0/0x23
[ 0.279184] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279186] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.279193] pci 0000:03:00.0: Boot video device
[ 0.279196] pci 0000:03:03.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.279199] pci 0000:03:03.0: calling quirk_usb_early_handoff+0x0/0x616
[ 0.279202] pci 0000:03:03.0: calling pci_fixup_video+0x0/0xbb
[ 0.279586] alloc irq_desc for 417 on node 0
[ 0.279589] alloc kstat_irqs on node 0
[ 0.279626] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.280015] alloc irq_desc for 416 on node 0
[ 0.280017] alloc kstat_irqs on node 0
[ 0.280052] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.280532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.281513] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.281902] ACPI: Power Button [PWRF]
[ 0.282274] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.282657] ACPI: Power Button [PWRB]
[ 0.283879] ACPI: SSDT 000000007cb80270 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.284909] ACPI: SSDT 000000007cb80b70 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.286027] Marking TSC unstable due to TSC halts in idle
[ 0.286271] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.287861] ACPI: SSDT 000000007cb804b0 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.288682] ACPI: SSDT 000000007cb81030 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 0.289816] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.291023] ACPI: SSDT 000000007cb806f0 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.292243] ACPI: SSDT 000000007cb810c0 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 0.293748] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.294981] ACPI: SSDT 000000007cb80930 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.295358] ACPI: SSDT 000000007cb81150 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 0.296945] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.301580] Event-channel device installed.
[ 0.306564] blktap_device_init: blktap device major 253
[ 0.306813] blktap_ring_init: blktap ring major: 251
[ 0.308238] registering netback
[ 0.308627] pciback: pcistub_init_devices_late
[ 0.316813] alloc irq_desc for 415 on node 0
[ 0.316816] alloc kstat_irqs on node 0
[ 0.317938] hpet_acpi_add: no address or irqs in _CRS
[ 0.318486] Non-volatile memory driver v1.3
[ 0.318806] Linux agpgart interface v0.103
[ 0.319035] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 0.320997] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.336237] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.336728] [drm] Initialized drm 1.1.0 20060810
[ 0.337042] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.342881] brd: module loaded
[ 0.345049] loop: module loaded
[ 0.345513] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.346817] ata_piix 0000:00:1f.2: version 2.13
[ 0.346838] xen: registering gsi 22 triggering 0 polarity 1
[ 0.346844] alloc irq_desc for 22 on node 0
[ 0.346848] alloc kstat_irqs on node 0
[ 0.346853] xen: --> irq=22
[ 0.346857] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1
[ 0.347255] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.347521] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.347927] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.348064] scsi0 : ata_piix
[ 0.348606] scsi1 : ata_piix
[ 0.351756] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 0.351972] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 0.352235] xen: registering gsi 22 triggering 0 polarity 1
[ 0.352238] xen_allocate_pirq: returning irq 22 for gsi 22
[ 0.352458] xen: --> irq=22
[ 0.352460] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1
[ 0.352843] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.353096] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.353517] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.353651] scsi2 : ata_piix
[ 0.354174] scsi3 : ata_piix
[ 0.357016] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 22
[ 0.357237] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 22
[ 0.358132] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 0.358362] Copyright (c) 1999-2006 Intel Corporation.
[ 0.358676] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.358888] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.359147] xen: registering gsi 20 triggering 0 polarity 1
[ 0.359150] alloc irq_desc for 20 on node 0
[ 0.359153] alloc kstat_irqs on node 0
[ 0.359162] xen: --> irq=20
[ 0.359165] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0 pin 20 triggering 1 polarity 1
[ 0.359562] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.359778] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 0.360157] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.360157] alloc irq_desc for 414 on node 0
[ 0.360157] alloc kstat_irqs on node 0
[ 0.451952] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:54:9a:46:ea
[ 0.452358] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.452641] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[ 0.453090] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.453315] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.453871] sky2 driver version 1.23
[ 0.454420] tun: Universal TUN/TAP device driver, 1.6
[ 0.454628] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.455202] console [netcon0] enabled
[ 0.455416] netconsole: network logging started
[ 0.456016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.456262] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 0.456290] xen: registering gsi 18 triggering 0 polarity 1
[ 0.456296] alloc irq_desc for 18 on node 0
[ 0.456299] alloc kstat_irqs on node 0
[ 0.456303] xen: --> irq=18
[ 0.456307] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 0.456696] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.456928] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.456934] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.457181] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices'
[ 0.457188] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.457329] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.457741] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 0.457746] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 0.457799] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.461690] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.461926] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.461929] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 0.461953] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8f9000
[ 0.462002] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.466066] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.471081] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.471334] usb usb1: default language 0x0409
[ 0.471347] usb usb1: udev 1, busnum 1, minor = 0
[ 0.471350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.471595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.471974] usb usb1: Product: EHCI Host Controller
[ 0.472064] usb usb1: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 0.472064] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.472671] usb usb1: uevent
[ 0.472785] usb usb1: usb_probe_device
[ 0.472789] usb usb1: configuration #1 chosen from 1 choice
[ 0.473049] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.473070] usb 1-0:1.0: uevent
[ 0.473183] hub 1-0:1.0: usb_probe_interface
[ 0.473186] hub 1-0:1.0: usb_probe_interface - got id
[ 0.473189] hub 1-0:1.0: USB hub found
[ 0.473437] hub 1-0:1.0: 6 ports detected
[ 0.473646] hub 1-0:1.0: standalone hub
[ 0.473649] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.473652] hub 1-0:1.0: individual port over-current protection
[ 0.473655] hub 1-0:1.0: power on to power good time: 20ms
[ 0.473662] hub 1-0:1.0: local power source is good
[ 0.473665] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.473709] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.473752] xen: registering gsi 23 triggering 0 polarity 1
[ 0.473758] alloc irq_desc for 23 on node 0
[ 0.473761] alloc kstat_irqs on node 0
[ 0.473765] xen: --> irq=23
[ 0.473769] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1
[ 0.474166] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.474166] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.474166] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.474668] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002'
[ 0.474808] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.475201] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 0.475206] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 0.475251] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.479153] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.479384] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.479387] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 0.479410] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8f8000
[ 0.479629] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.483522] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.489032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.489272] usb usb2: default language 0x0409
[ 0.489285] usb usb2: udev 1, busnum 2, minor = 128
[ 0.489288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.489526] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.489900] usb usb2: Product: EHCI Host Controller
[ 0.490015] usb usb2: Manufacturer: Linux 2.6.31.6 ehci_hcd
[ 0.490015] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.490601] usb usb2: uevent
[ 0.490706] usb usb2: usb_probe_device
[ 0.490709] usb usb2: configuration #1 chosen from 1 choice
[ 0.490953] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.490973] usb 2-0:1.0: uevent
[ 0.491076] hub 2-0:1.0: usb_probe_interface
[ 0.491080] hub 2-0:1.0: usb_probe_interface - got id
[ 0.491082] hub 2-0:1.0: USB hub found
[ 0.491322] hub 2-0:1.0: 6 ports detected
[ 0.491533] hub 2-0:1.0: standalone hub
[ 0.491536] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.491538] hub 2-0:1.0: individual port over-current protection
[ 0.491541] hub 2-0:1.0: power on to power good time: 20ms
[ 0.491548] hub 2-0:1.0: local power source is good
[ 0.491551] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.491592] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.491731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.491944] ohci_hcd: block sizes: ed 80 td 96
[ 0.492059] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.492452] xen: registering gsi 16 triggering 0 polarity 1
[ 0.492458] alloc irq_desc for 16 on node 0
[ 0.492461] alloc kstat_irqs on node 0
[ 0.492465] xen: --> irq=16
[ 0.492469] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 0.492860] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.493094] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.493099] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.493323] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003'
[ 0.493467] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.493880] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.494111] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.494114] uhci_hcd 0000:00:1a.0: Performing full reset
[ 0.494142] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 0.494164] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c400
[ 0.494475] usb usb3: default language 0x0409
[ 0.494488] usb usb3: udev 1, busnum 3, minor = 256
[ 0.494491] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.494708] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.495104] usb usb3: Product: UHCI Host Controller
[ 0.495104] usb usb3: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 0.495104] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.495818] usb usb3: uevent
[ 0.495936] usb usb3: usb_probe_device
[ 0.495939] usb usb3: configuration #1 chosen from 1 choice
[ 0.496165] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 0.496186] usb 3-0:1.0: uevent
[ 0.496312] hub 3-0:1.0: usb_probe_interface
[ 0.496315] hub 3-0:1.0: usb_probe_interface - got id
[ 0.496318] hub 3-0:1.0: USB hub found
[ 0.496573] hub 3-0:1.0: 2 ports detected
[ 0.496775] hub 3-0:1.0: standalone hub
[ 0.496777] hub 3-0:1.0: no power switching (usb 1.0)
[ 0.496780] hub 3-0:1.0: individual port over-current protection
[ 0.496783] hub 3-0:1.0: power on to power good time: 2ms
[ 0.496790] hub 3-0:1.0: local power source is good
[ 0.496793] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 0.496817] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.496865] xen: registering gsi 21 triggering 0 polarity 1
[ 0.496871] alloc irq_desc for 21 on node 0
[ 0.496874] alloc kstat_irqs on node 0
[ 0.496878] xen: --> irq=21
[ 0.496882] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1
[ 0.497266] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.497297] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.497297] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.497705] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004'
[ 0.497841] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.498227] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.498457] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.498460] uhci_hcd 0000:00:1a.1: Performing full reset
[ 0.498480] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 0.498502] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c480
[ 0.498805] usb usb4: default language 0x0409
[ 0.498817] usb usb4: udev 1, busnum 4, minor = 384
[ 0.498820] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.499043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.499212] usb usb4: Product: UHCI Host Controller
[ 0.499212] usb usb4: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 0.499212] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.500157] usb usb4: uevent
[ 0.500278] usb usb4: usb_probe_device
[ 0.500281] usb usb4: configuration #1 chosen from 1 choice
[ 0.500504] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 0.500537] usb 4-0:1.0: uevent
[ 0.500657] hub 4-0:1.0: usb_probe_interface
[ 0.500660] hub 4-0:1.0: usb_probe_interface - got id
[ 0.500663] hub 4-0:1.0: USB hub found
[ 0.500895] hub 4-0:1.0: 2 ports detected
[ 0.501105] hub 4-0:1.0: standalone hub
[ 0.501107] hub 4-0:1.0: no power switching (usb 1.0)
[ 0.501109] hub 4-0:1.0: individual port over-current protection
[ 0.501112] hub 4-0:1.0: power on to power good time: 2ms
[ 0.501128] hub 4-0:1.0: local power source is good
[ 0.501131] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 0.501154] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.501208] xen: registering gsi 18 triggering 0 polarity 1
[ 0.501211] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.501432] xen: --> irq=18
[ 0.501436] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 0.501835] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.502082] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.502087] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.502320] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005'
[ 0.502462] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.502855] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.503084] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.503087] uhci_hcd 0000:00:1a.2: Performing full reset
[ 0.503107] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 0.503114] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c800
[ 0.503444] usb usb5: default language 0x0409
[ 0.503456] usb usb5: udev 1, busnum 5, minor = 512
[ 0.503459] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.503679] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.504065] usb usb5: Product: UHCI Host Controller
[ 0.504077] usb usb5: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 0.504077] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.504761] usb usb5: uevent
[ 0.504896] usb usb5: usb_probe_device
[ 0.504900] usb usb5: configuration #1 chosen from 1 choice
[ 0.505137] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 0.505160] usb 5-0:1.0: uevent
[ 0.505282] hub 5-0:1.0: usb_probe_interface
[ 0.505285] hub 5-0:1.0: usb_probe_interface - got id
[ 0.505287] hub 5-0:1.0: USB hub found
[ 0.509915] hub 5-0:1.0: 2 ports detected
[ 0.510127] hub 5-0:1.0: standalone hub
[ 0.510129] hub 5-0:1.0: no power switching (usb 1.0)
[ 0.510131] hub 5-0:1.0: individual port over-current protection
[ 0.510134] hub 5-0:1.0: power on to power good time: 2ms
[ 0.510148] hub 5-0:1.0: local power source is good
[ 0.510159] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 0.510182] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.510229] xen: registering gsi 23 triggering 0 polarity 1
[ 0.510233] xen_allocate_pirq: returning irq 23 for gsi 23
[ 0.510462] xen: --> irq=23
[ 0.510466] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1
[ 0.510868] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.511086] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.511091] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.511316] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006'
[ 0.511472] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.511866] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.512086] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.512089] uhci_hcd 0000:00:1d.0: Performing full reset
[ 0.512109] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 0.512117] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[ 0.512417] usb usb6: default language 0x0409
[ 0.512430] usb usb6: udev 1, busnum 6, minor = 640
[ 0.512433] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.512653] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.513039] usb usb6: Product: UHCI Host Controller
[ 0.513079] usb usb6: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 0.513079] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.513743] usb usb6: uevent
[ 0.513860] usb usb6: usb_probe_device
[ 0.513864] usb usb6: configuration #1 chosen from 1 choice
[ 0.514097] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 0.514113] usb 6-0:1.0: uevent
[ 0.514224] hub 6-0:1.0: usb_probe_interface
[ 0.514227] hub 6-0:1.0: usb_probe_interface - got id
[ 0.514230] hub 6-0:1.0: USB hub found
[ 0.514491] hub 6-0:1.0: 2 ports detected
[ 0.514693] hub 6-0:1.0: standalone hub
[ 0.514695] hub 6-0:1.0: no power switching (usb 1.0)
[ 0.514696] hub 6-0:1.0: individual port over-current protection
[ 0.514699] hub 6-0:1.0: power on to power good time: 2ms
[ 0.514704] hub 6-0:1.0: local power source is good
[ 0.514706] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 0.514726] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.514771] xen: registering gsi 19 triggering 0 polarity 1
[ 0.514775] alloc irq_desc for 19 on node 0
[ 0.514778] alloc kstat_irqs on node 0
[ 0.514781] xen: --> irq=19
[ 0.514784] xen_set_ioapic_routing: irq 19 gsi 19 vector 19 ioapic 0 pin 19 triggering 1 polarity 1
[ 0.515177] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.515208] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.515208] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.515627] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007'
[ 0.515747] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.516171] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.516399] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.516401] uhci_hcd 0000:00:1d.1: Performing full reset
[ 0.516418] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 0.516435] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
[ 0.516709] usb usb7: default language 0x0409
[ 0.516718] usb usb7: udev 1, busnum 7, minor = 768
[ 0.516721] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.516939] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.517164] usb usb7: Product: UHCI Host Controller
[ 0.517164] usb usb7: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 0.517164] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.518003] usb usb7: uevent
[ 0.518105] usb usb7: usb_probe_device
[ 0.518108] usb usb7: configuration #1 chosen from 1 choice
[ 0.518342] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 0.518357] usb 7-0:1.0: uevent
[ 0.518469] hub 7-0:1.0: usb_probe_interface
[ 0.518480] hub 7-0:1.0: usb_probe_interface - got id
[ 0.518483] hub 7-0:1.0: USB hub found
[ 0.518738] hub 7-0:1.0: 2 ports detected
[ 0.518937] hub 7-0:1.0: standalone hub
[ 0.518939] hub 7-0:1.0: no power switching (usb 1.0)
[ 0.518941] hub 7-0:1.0: individual port over-current protection
[ 0.518943] hub 7-0:1.0: power on to power good time: 2ms
[ 0.518948] hub 7-0:1.0: local power source is good
[ 0.518951] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 0.518970] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.519016] xen: registering gsi 18 triggering 0 polarity 1
[ 0.519019] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.519234] xen: --> irq=18
[ 0.519237] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 0.519638] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.519854] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.519859] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.520099] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008'
[ 0.520250] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.520644] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.520854] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.520856] uhci_hcd 0000:00:1d.2: Performing full reset
[ 0.520873] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 0.520879] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
[ 0.521155] usb usb8: default language 0x0409
[ 0.521173] usb usb8: udev 1, busnum 8, minor = 896
[ 0.521175] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.521405] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.521785] usb usb8: Product: UHCI Host Controller
[ 0.521992] usb usb8: Manufacturer: Linux 2.6.31.6 uhci_hcd
[ 0.522107] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.522451] usb usb8: uevent
[ 0.522579] usb usb8: usb_probe_device
[ 0.522582] usb usb8: configuration #1 chosen from 1 choice
[ 0.522828] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 0.522844] usb 8-0:1.0: uevent
[ 0.522941] hub 8-0:1.0: usb_probe_interface
[ 0.522944] hub 8-0:1.0: usb_probe_interface - got id
[ 0.522947] hub 8-0:1.0: USB hub found
[ 0.523194] hub 8-0:1.0: 2 ports detected
[ 0.523402] hub 8-0:1.0: standalone hub
[ 0.523404] hub 8-0:1.0: no power switching (usb 1.0)
[ 0.523406] hub 8-0:1.0: individual port over-current protection
[ 0.523408] hub 8-0:1.0: power on to power good time: 2ms
[ 0.523422] hub 8-0:1.0: local power source is good
[ 0.523424] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 0.523443] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001'
[ 0.523714] usbcore: registered new interface driver usblp
[ 0.523932] Initializing USB Mass Storage driver...
[ 0.524327] usbcore: registered new interface driver usb-storage
[ 0.524544] USB Mass Storage support registered.
[ 0.524880] usbcore: registered new interface driver libusual
[ 0.525373] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.528506] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.528610] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.529190] mice: PS/2 mouse device common for all mice
[ 0.530057] rtc_cmos 00:03: RTC can wake from S4
[ 0.530412] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.530664] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.530994] xen: registering gsi 18 triggering 0 polarity 1
[ 0.530998] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.531244] xen: --> irq=18
[ 0.531246] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1
[ 0.531644] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.531963] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 0.531963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.533512] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.534298] cpuidle: using governor ladder
[ 0.534516] cpuidle: using governor menu
[ 0.537461] usbcore: registered new interface driver hiddev
[ 0.537752] usbcore: registered new interface driver usbhid
[ 0.537962] usbhid: v2.6:USB HID core driver
[ 0.538448] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 0.542289] xen: registering gsi 22 triggering 0 polarity 1
[ 0.542293] xen_allocate_pirq: returning irq 22 for gsi 22
[ 0.542514] xen: --> irq=22
[ 0.542517] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1
[ 0.542910] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.543138] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 0.554739] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.573117] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 0.580730] ALSA device list:
[ 0.580937] #0: HDA Intel at 0xfe8f0000 irq 22
[ 0.581382] Netfilter messages via NETLINK v0.30.
[ 0.581618] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 0.582202] ctnetlink v0.93: registering with nfnetlink.
[ 0.583015] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.583250] TCP cubic registered
[ 0.583456] Initializing XFRM netlink socket
[ 0.584343] NET: Registered protocol family 10
[ 0.585713] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.585982] IPv6 over IPv4 tunneling driver
[ 0.587092] NET: Registered protocol family 17
[ 0.587752] RPC: Registered udp transport module.
[ 0.587991] RPC: Registered tcp transport module.
[ 0.588628] PM: Resume from disk failed.
[ 0.588645] registered taskstats version 1
[ 0.589051] Magic number: 14:476:565
[ 0.592121] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 0.596095] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.600083] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.609098] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.615080] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.618113] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.623050] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.673676] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.685619] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.719855] logips2pp: Detected unknown logitech mouse model 57
[ 0.973798] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 0.974039] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.113118] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.113369] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.116345] ata1.00: ATA-7: WDC WD800JD-60MSA1, 10.01E01, max UDMA/100
[ 1.116562] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.119326] ata1.00: configured for UDMA/100
[ 1.119680] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-60MS 10.0 PQ: 0 ANSI: 5
[ 1.120598] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.120628] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.120741] sd 0:0:0:0: [sda] Write Protect is off
[ 1.120744] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.120795] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.121048] sda: sda1 sda2 < sda5 >
[ 1.152931] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.153222] Freeing unused kernel memory: 532k freed
[ 1.153608] Write protecting the kernel read-only data: 8808k
[ 1.187958] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 1.348471] usb usb3: uevent
[ 1.348497] usb 3-0:1.0: uevent
[ 1.348564] usb usb4: uevent
[ 1.348594] usb 4-0:1.0: uevent
[ 1.348665] usb usb5: uevent
[ 1.348691] usb 5-0:1.0: uevent
[ 1.348756] usb usb1: uevent
[ 1.348780] usb 1-0:1.0: uevent
[ 1.349324] usb usb6: uevent
[ 1.349349] usb 6-0:1.0: uevent
[ 1.349421] usb usb7: uevent
[ 1.349444] usb 7-0:1.0: uevent
[ 1.349511] usb usb8: uevent
[ 1.349535] usb 8-0:1.0: uevent
[ 1.349601] usb usb2: uevent
[ 1.349624] usb 2-0:1.0: uevent
[ 1.704061] usb usb3: suspend_rh (auto-stop)
[ 1.704092] usb usb4: suspend_rh (auto-stop)
[ 1.704122] usb usb5: suspend_rh (auto-stop)
[ 1.704149] usb usb6: suspend_rh (auto-stop)
[ 1.704174] usb usb7: suspend_rh (auto-stop)
[ 1.704201] usb usb8: suspend_rh (auto-stop)
[ 1.868002] PM: Starting manual resume from disk
[ 1.868200] PM: Resume from partition 8:5
[ 1.868202] PM: Checking hibernation image.
[ 1.868415] PM: Resume from disk failed.
[ 1.884281] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1.884288] PM: Basic memory bitmaps created
[ 1.889351] PM: Basic memory bitmaps freed
[ 1.942552] kjournald starting. Commit interval 5 seconds
[ 1.942579] EXT3-fs: mounted filesystem with writeback data mode.
[ 2.701208] hub 1-0:1.0: hub_suspend
[ 2.701217] usb usb1: bus auto-suspend
[ 2.701221] ehci_hcd 0000:00:1a.7: suspend root hub
[ 2.701241] hub 2-0:1.0: hub_suspend
[ 2.701246] usb usb2: bus auto-suspend
[ 2.701249] ehci_hcd 0000:00:1d.7: suspend root hub
[ 2.701268] hub 3-0:1.0: hub_suspend
[ 2.701272] usb usb3: bus auto-suspend
[ 2.701276] usb usb3: suspend_rh
[ 2.701296] hub 4-0:1.0: hub_suspend
[ 2.701301] usb usb4: bus auto-suspend
[ 2.701303] usb usb4: suspend_rh
[ 2.701322] hub 5-0:1.0: hub_suspend
[ 2.701326] usb usb5: bus auto-suspend
[ 2.701329] usb usb5: suspend_rh
[ 2.701348] hub 6-0:1.0: hub_suspend
[ 2.701352] usb usb6: bus auto-suspend
[ 2.701355] usb usb6: suspend_rh
[ 2.701373] hub 7-0:1.0: hub_suspend
[ 2.701377] usb usb7: bus auto-suspend
[ 2.701380] usb usb7: suspend_rh
[ 2.701398] hub 8-0:1.0: hub_suspend
[ 2.701403] usb usb8: bus auto-suspend
[ 2.701405] usb usb8: suspend_rh
[ 3.355262] udevd version 125 started
[ 3.489750] usb usb3: uevent
[ 3.489792] usb 3-0:1.0: uevent
[ 3.489890] usb usb4: uevent
[ 3.489922] usb 4-0:1.0: uevent
[ 3.490018] usb usb5: uevent
[ 3.490049] usb 5-0:1.0: uevent
[ 3.490138] usb usb1: uevent
[ 3.490169] usb 1-0:1.0: uevent
[ 3.490902] usb usb6: uevent
[ 3.490949] usb 6-0:1.0: uevent
[ 3.491067] usb usb7: uevent
[ 3.491102] usb 7-0:1.0: uevent
[ 3.491189] usb usb8: uevent
[ 3.491221] usb 8-0:1.0: uevent
[ 3.491310] usb usb2: uevent
[ 3.491347] usb 2-0:1.0: uevent
[ 5.655481] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k
[ 5.920661] EXT3 FS on sda1, internal journal
[ 8.914360] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.769831] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 10.770060] 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 10.770538] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 15.615774] alloc irq_desc for 413 on node 0
[ 15.615777] alloc kstat_irqs on node 0
[ 15.615822] alloc irq_desc for 412 on node 0
[ 15.615825] alloc kstat_irqs on node 0
[ 15.615834] xenbus_probe wake_waiting
[ 15.616055] xenbus_probe wake_waiting
[ 15.618456] XENBUS: Unable to read cpu state
[ 15.618875] XENBUS: Unable to read cpu state
[ 15.619255] XENBUS: Unable to read cpu state
[ 15.619620] XENBUS: Unable to read cpu state
[ 15.620119] xenbus_probe_devices backend
[ 15.621661] xenbus_probe_devices failed xenbus_directory
[ 15.621900] backend_probe_and_watch devices probed ok
[ 15.622265] backend_probe_and_watch watch add ok ok
[ 15.622477] backend_probe_and_watch all done
[ 15.622683] xenbus_probe_devices device
[ 15.623034] xenbus_probe_devices failed xenbus_directory
[ 15.623257] frontend_probe_and_watch devices probed ok
[ 15.623611] frontend_probe_and_watch watch add ok ok
[ 15.623814] frontend_probe_and_watch all done
[ 18.845572] blktap_sysfs_create: adding attributes for dev ffff88001b8f2000
[ 18.845938] blktap_control_allocate_tap: allocated tap ffff88001dd3e800
[ 18.872952] blktap_ring_open: opening device blktap0
[ 18.873004] blktap_ring_open: opened device 0
[ 18.873391] blktap_ring_mmap: blktap: mapping pid is 3668
[ 18.873598] blktap_validate_params: aio:/perftest/tapraw.img: capacity: 6291456, sector-size: 512
[ 18.873967] blktap_validate_params: aio:/perftest/tapraw.img: capacity: 6291456, sector-size: 512
[ 18.874336] blktap_device_create: minor 0 sectors 6291456 sector-size 512
[ 18.874698] blktap_device_create: creation of 253:0: 0
[ 19.257451] device vif1.0 entered promiscuous mode
[ 19.262732] xenbr0: port 1(vif1.0) entering forwarding state
[ 21.232014] eth1: no IPv6 routers present
[ 25.939026] xenbr0: no IPv6 routers present
[ 30.173053] vif1.0: no IPv6 routers present
[ 83.601152] alloc irq_desc for 411 on node 0
[ 83.601156] alloc kstat_irqs on node 0
[ 83.615314] alloc irq_desc for 410 on node 0
[ 83.615319] alloc kstat_irqs on node 0
[ 84.355374] xenbr0: port 1(vif1.0) entering disabled state
[ 84.358296] xenbr0: port 1(vif1.0) entering disabled state
[ 85.761533] blktap_device_destroy: destroy device 0 users 0
[ 85.762293] blktap_ring_vm_close: unmapping ring 0
[ 85.762515] blktap_ring_release: freeing device 0
[ 85.766256] blktap_sysfs_destroy
[-- Attachment #3: lspci.txt --]
[-- Type: text/plain, Size: 22669 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
00:02.0 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [disabled] [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [disabled] [size=256M]
Region 4: I/O ports at cc00 [disabled] [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCIe advanced features <?>
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e14] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe8fb000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 414
Region 0: Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at c880 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0100c Data: 4199
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c400 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c480 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c800 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8f9000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] Vendor Specific Information <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation ICH10 HD Audio Controller [8086:3a6e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 4171
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 5 [8086:3a78] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 4179
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at bc00 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c000 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c080 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe8f8000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] Vendor Specific Information <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fdffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
00:1f.0 ISA bridge [0601]: Intel Corporation ICH10 LPC Interface Controller [8086:3a14] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 IDE interface [0101]: Intel Corporation ICH10 4 port SATA IDE Controller [8086:3a00] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff90 [size=16]
Region 5: I/O ports at ffa0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus Controller [8086:3a60] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8ef000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation ICH10 2 port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at b880 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b480 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b080 [size=16]
Region 5: I/O ports at b000 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ata_piix
01:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaff000 (32-bit, non-prefetchable) [size=512]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
03:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 86C326 5598/6326 [1039:6326] (rev 0b) (prog-if 00 [VGA controller])
Subsystem: Palit Microsystems Inc. SiS6326 GUI Accelerator [1569:6326]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd800000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at febf0000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at ec00 [size=128]
Expansion ROM at feb00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at febdf000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #4: xm-dmesg.txt --]
[-- Type: text/plain, Size: 16804 bytes --]
fffff82313000
(XEN) Boot stack: ffffffff82313000->ffffffff82314000
(XEN) TOTAL: ffffffff80000000->ffffffff82400000
(XEN) heap[15]: 131072kB free
(XEN) ENTRY ADDRESS: ffffffff819a3a60
(XEN) heap[16]: 262144kB free
(XEN) Dom0 has maximum 4 VCPUs
(XEN) heap[17]: 524288kB free
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff818a3000
(XEN) heap[18]: 867408kB free
(XEN) Dom heap: 1914960kB free
(XEN) Physical memory information:
(XEN) elf_load_binary: phdr 1 at 0xffffffff818a3000 -> 0xffffffff8198c338
(XEN) Xen heap: 0kB free
(XEN) elf_load_binary: phdr 2 at 0xffffffff8198d000 -> 0xffffffff8198d888
(XEN) heap[08]: 1024kB free
(XEN) elf_load_binary: phdr 3 at 0xffffffff8198e000 -> 0xffffffff819a3860
(XEN) heap[09]: 2048kB free
(XEN) elf_load_binary: phdr 4 at 0xffffffff819a3860 -> 0xffffffff81a20000
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) Scrubbing Free RAM: heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) 'u' pressed -> dumping numa info (now-0x0:6743C505)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) .Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) . Dom heap: 1484140kB free
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) . Dom heap: 1484140kB free
(XEN) 'u' pressed -> dumping numa info (now-0x0:6DF5952C)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) 'u' pressed -> dumping numa info (now-0x0:6FCF97E7)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) .CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) . heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) 'u' pressed -> dumping numa info (now-0x0:73E9020F)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) . Node 0: 131072
(XEN) 'u' pressed -> dumping numa info (now-0x0:75D7C619)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) . heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) 'u' pressed -> dumping numa info (now-0x0:79DC61E4)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) .CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) . heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) . heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) . heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) . heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) Physical memory information:
(XEN) Xen heap: 0kB free
(XEN) heap[08]: 1024kB free
(XEN) heap[09]: 2048kB free
(XEN) heap[10]: 4096kB free
(XEN) heap[11]: 8192kB free
(XEN) heap[12]: 16384kB free
(XEN) heap[13]: 32768kB free
(XEN) heap[14]: 65536kB free
(XEN) heap[15]: 131072kB free
(XEN) . heap[16]: 262144kB free
(XEN) heap[17]: 524288kB free
(XEN) heap[18]: 436588kB free
(XEN) Dom heap: 1484140kB free
(XEN) 'u' pressed -> dumping numa info (now-0x0:87E94BDD)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) . Node 0: 131072
(XEN) 'u' pressed -> dumping numa info (now-0x0:89D7FFE1)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) done.
(XEN) Node 0: 131072
(XEN) Xen trace buffers: disabled
(XEN) 'u' pressed -> dumping numa info (now-0x0:8BB60ECE)
(XEN) Std. Loglevel: Allidx0 -> NODE0 start->0 size->510832
(XEN)
(XEN) Guest Loglevel: Allphys_to_nid(0000000000001000) -> 0 should be 0
(XEN)
(XEN) CPU0 -> NODE0
(XEN) *** Serial input -> DOM0CPU1 -> NODE0
(XEN) (type 'CTRL-a' three times to switch input to Xen)CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN)
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) Freed 156kB init memory.
(XEN) Node 0: 131072
(XEN) 'u' pressed -> dumping numa info (now-0x0:8E857196)
(XEN) idx0 -> NODE0 start->0 size->510832
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1445: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector for irq:16
(XEN) irq.c:1445: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector for irq:17
(XEN) irq.c:1445: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector for irq:18
(XEN) irq.c:1445: dom0: pirq 0 or irq 18 already mapped
(XEN) allocated vector for irq:19
(XEN) irq.c:1445: dom0: pirq 0 or irq 19 already mapped
(XEN) allocated vector for irq:20
(XEN) irq.c:1445: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector for irq:22
(XEN) irq.c:1445: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector for irq:23
(XEN) irq.c:1445: dom0: pirq 0 or irq 23 already mapped
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 01:00.0
(XEN) PCI add device 03:00.0
(XEN) PCI add device 03:03.0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=00000904
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN) _PPC: 0
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PSS: state_count=3
(XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
(XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
(XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4
(XEN) _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) max_freq: 2670000 second_max_freq: 2336000
(XEN) CPU 0 initialization completed
(XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
(XEN) _PPC: 0
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PSS: state_count=3
(XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
(XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
(XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4
(XEN) _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) max_freq: 2670000 second_max_freq: 2336000
(XEN) CPU 1 initialization completed
(XEN) Set CPU acpi_id(3) cpuid(2) Px State info:
(XEN) _PPC: 0
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) Set CPU acpi_id(3) cpuid(2) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PSS: state_count=3
(XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
(XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
(XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4
(XEN) _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) max_freq: 2670000 second_max_freq: 2336000
(XEN) CPU 2 initialization completed
(XEN) Set CPU acpi_id(4) cpuid(3) Px State info:
(XEN) _PPC: 0
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) Set CPU acpi_id(4) cpuid(3) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) _PSS: state_count=3
(XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f
(XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b
(XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4
(XEN) _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) max_freq: 2670000 second_max_freq: 2336000
(XEN) CPU 3 initialization completed
(XEN) allocated vector for irq:21
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=23, irq=23
(XEN) ioapic_guest_write: new_entry=0001a917
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=22, irq=22
(XEN) ioapic_guest_write: new_entry=0001a916
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[-- Attachment #5: xm-imfo.txt --]
[-- Type: text/plain, Size: 1370 bytes --]
host : xentest
release : 2.6.31.6
version : #2 SMP Sun Feb 14 05:18:49 CET 2010
machine : x86_64
nr_cpus : 4
nr_nodes : 1
cores_per_socket : 4
threads_per_core : 1
cpu_mhz : 2666
hw_caps : bfebfbff:20100800:00000000:00000940:0408e3fd:00000000:00000001:00000000
virt_caps : hvm hvm_directio
total_memory : 1964
free_memory : 1455
node_to_cpu : node0:0-3
node_to_memory : node0:1455
node_to_dma32_mem : node0:1455
max_node_id : 0
xen_major : 4
xen_minor : 0
xen_extra : .0-rc3-pre
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : Sun Feb 14 03:19:11 2010 +0100 20942:90ca2b00e8ff
xen_commandline : loglvl=all loglvl_guest=all dom0_mem=512M com1=115200,8n1 console=com1 iommu_inclusive_mapping=1
cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
cc_compile_by : root
cc_compile_domain :
cc_compile_date : Sun Feb 14 03:35:12 CET 2010
xend_config_format : 4
[-- Attachment #6: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: pciback doesn't seize device, but no error either. (solved, forgot to rename to xen-pciback.hide)
2010-02-14 12:45 pciback doesn't seize device, but no error either Sander Eikelenboom
@ 2010-02-14 14:37 ` Sander Eikelenboom
2010-02-14 14:41 ` pciback doesn't seize device, but no error either Ervin Novak
2010-02-15 14:10 ` Konrad Rzeszutek Wilk
2 siblings, 0 replies; 5+ messages in thread
From: Sander Eikelenboom @ 2010-02-14 14:37 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Xen-Devel (E-mail)
Hi Konrad,
Sorry for the noise, forgot to fixup my grub lines to the new 'xen-pciback.hide' instead of 'pciback.hide'.
Pretty stupid because i encountered it early ..
--
Sander
> Hi Konrad,
> I'm trying to passthrough a secondary gfx device(intel IGD) (with patches from Han Weidong).
> Intel VT-D is enabled, pciback + pciback debug compiled in.
> But some how pciback refuses to seize the device, but i don't see an error either.
> Attached:
> - xm info
> - xm dmesg
> - dmesg
> - lspci -vvvknn
> Any ideas on what it might be ?
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: pciback doesn't seize device, but no error either.
2010-02-14 12:45 pciback doesn't seize device, but no error either Sander Eikelenboom
2010-02-14 14:37 ` pciback doesn't seize device, but no error either. (solved, forgot to rename to xen-pciback.hide) Sander Eikelenboom
@ 2010-02-14 14:41 ` Ervin Novak
2010-02-14 14:42 ` Ervin Novak
2010-02-15 14:10 ` Konrad Rzeszutek Wilk
2 siblings, 1 reply; 5+ messages in thread
From: Ervin Novak @ 2010-02-14 14:41 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk
Hi,
> Any ideas on what it might be ?
dmesg says:
> Unknown boot option `pciback.hide=(0000:00:02.0)(0000:00:02.1)': ignoring
is your pciback.ko module in your initrd and/or loaded during boot? I
needed it in order to dismiss this error message.
Hth,
Ervin
On Sun, Feb 14, 2010 at 1:45 PM, Sander Eikelenboom
<linux@eikelenboom.it> wrote:
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: pciback doesn't seize device, but no error either.
2010-02-14 14:41 ` pciback doesn't seize device, but no error either Ervin Novak
@ 2010-02-14 14:42 ` Ervin Novak
0 siblings, 0 replies; 5+ messages in thread
From: Ervin Novak @ 2010-02-14 14:42 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk
Ok, I just saw your other email... :)
ervin
On Sun, Feb 14, 2010 at 3:41 PM, Ervin Novak <enovak@opensuse.hu> wrote:
> Hi,
>
>> Any ideas on what it might be ?
>
> dmesg says:
>> Unknown boot option `pciback.hide=(0000:00:02.0)(0000:00:02.1)': ignoring
>
> is your pciback.ko module in your initrd and/or loaded during boot? I
> needed it in order to dismiss this error message.
>
> Hth,
> Ervin
>
> On Sun, Feb 14, 2010 at 1:45 PM, Sander Eikelenboom
> <linux@eikelenboom.it> wrote:
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: pciback doesn't seize device, but no error either.
2010-02-14 12:45 pciback doesn't seize device, but no error either Sander Eikelenboom
2010-02-14 14:37 ` pciback doesn't seize device, but no error either. (solved, forgot to rename to xen-pciback.hide) Sander Eikelenboom
2010-02-14 14:41 ` pciback doesn't seize device, but no error either Ervin Novak
@ 2010-02-15 14:10 ` Konrad Rzeszutek Wilk
2 siblings, 0 replies; 5+ messages in thread
From: Konrad Rzeszutek Wilk @ 2010-02-15 14:10 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel@lists.xensource.com
On Sun, Feb 14, 2010 at 01:45:38PM +0100, Sander Eikelenboom wrote:
> Hi Konrad,
>
> I'm trying to passthrough a secondary gfx device(intel IGD) (with patches from Han Weidong).
> Intel VT-D is enabled, pciback + pciback debug compiled in.
> But some how pciback refuses to seize the device, but i don't see an error either.
>
> Attached:
> - xm info
> - xm dmesg
> - dmesg
> - lspci -vvvknn
>
> Any ideas on what it might be ?
>
> --
> Best regards,
> Sander mailto:linux@eikelenboom.it
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.31.6 (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Sun Feb 14 05:18:49 CET 2010
> [ 0.000000] Command line: root=/dev/sda1 ro earlyprintk=xen pciback.hide=(0000:00:02.0)(0000:00:02.1) reassigndev=0000:00:02.0,0000:00:02.1 reassign_resources
It is called 'xen-pciback' now. Try that instead of 'pciback'.
Also, 'reassigneddev' and 'reassign_resources' are no more in the upstream
kernels. It is one single option and it is: 'pci=resource_alignment=08:02.0'.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-02-15 14:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-02-14 12:45 pciback doesn't seize device, but no error either Sander Eikelenboom
2010-02-14 14:37 ` pciback doesn't seize device, but no error either. (solved, forgot to rename to xen-pciback.hide) Sander Eikelenboom
2010-02-14 14:41 ` pciback doesn't seize device, but no error either Ervin Novak
2010-02-14 14:42 ` Ervin Novak
2010-02-15 14:10 ` Konrad Rzeszutek Wilk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.