From: Paul Walmsley <paul@pwsan.com>
To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Subject: [PATCH 09/19] AM35xx: Add clock support for new modules on AM35xx
Date: Mon, 15 Feb 2010 18:24:50 -0700 [thread overview]
Message-ID: <20100216012449.1101.58722.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100216011942.1101.14348.stgit@localhost.localdomain>
From: Ranjith Lohithakshan <ranjithl@ti.com>
This patch adds clock support for the following AM35xx modules
- Ethernet MAC
- CAN Controller (HECC)
- New MUSB OTG Controller with integrated Phy
- Video Processing Front End (VPFE)
- Additional UART (UART4)
Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clock34xx.c | 93 ++++++++++++++++++++++++++
arch/arm/mach-omap2/clock34xx.h | 4 +
arch/arm/mach-omap2/clock34xx_data.c | 118 +++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/cm-regbits-34xx.h | 10 +++
4 files changed, 225 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index d339d2b..6180a03 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -39,6 +39,16 @@
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
@@ -144,6 +154,89 @@ const struct clkops clkops_noncore_dpll_ops = {
.disable = omap3_noncore_dpll_disable,
};
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clkops clkops_am35xx_ipss_module_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clkops clkops_am35xx_ipss_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
{
/*
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 73f2109..e61e653 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -22,4 +22,8 @@ extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
extern const struct clkops clkops_noncore_dpll_ops;
+/* AM35xx-specific clkops */
+extern const struct clkops clkops_am35xx_ipss_module_wait;
+extern const struct clkops clkops_am35xx_ipss_wait;
+
#endif
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 0d04f92..d9d5b2e 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -2983,6 +2983,113 @@ static struct clk wdt1_fck = {
.recalc = &followparent_recalc,
};
+/* Clocks for AM35XX */
+static struct clk ipss_ick = {
+ .name = "ipss_ick",
+ .ops = &clkops_am35xx_ipss_wait,
+ .parent = &core_l3_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = AM35XX_EN_IPSS_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk emac_ick = {
+ .name = "emac_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_CPGMAC_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk rmii_ck = {
+ .name = "rmii_ck",
+ .ops = &clkops_null,
+ .flags = RATE_FIXED,
+ .rate = 50000000,
+};
+
+static struct clk emac_fck = {
+ .name = "emac_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &rmii_ck,
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_CPGMAC_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_am35xx = {
+ .name = "hsotgusb_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_USBOTG_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_fck_am35xx = {
+ .name = "hsotgusb_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &sys_ck,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_USBOTG_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hecc_ck = {
+ .name = "hecc_ck",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &sys_ck,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_HECC_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk vpfe_ick = {
+ .name = "vpfe_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_VPFE_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk pclk_ck = {
+ .name = "pclk_ck",
+ .ops = &clkops_null,
+ .flags = RATE_FIXED,
+ .rate = 27000000,
+};
+
+static struct clk vpfe_fck = {
+ .name = "vpfe_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &pclk_ck,
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_VPFE_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+/*
+ * The UART1/2 functional clock acts as the functional
+ * clock for UART4. No separate fclk control available.
+ */
+static struct clk uart4_ick_am35xx = {
+ .name = "uart4_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &core_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = AM35XX_EN_UART4_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/*
* clkdev
@@ -3209,6 +3316,17 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX),
+ CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
+ CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
+ CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
+ CLK("davinci_emac", "ick", &emac_ick, CK_AM35XX),
+ CLK("davinci_emac", "fck", &emac_fck, CK_AM35XX),
+ CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
+ CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
+ CLK("musb_hdrc", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
+ CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
+ CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index d18da47..c04c7c6 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -168,6 +168,12 @@
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
+/* AM35XX specific CM_ICLKEN1_CORE bits */
+#define AM35XX_EN_IPSS_MASK (1 << 4)
+#define AM35XX_EN_IPSS_SHIFT 4
+#define AM35XX_EN_UART4_MASK (1 << 23)
+#define AM35XX_EN_UART4_SHIFT 23
+
/* CM_ICLKEN2_CORE */
#define OMAP3430_EN_PKA (1 << 4)
#define OMAP3430_EN_PKA_SHIFT 4
@@ -220,6 +226,10 @@
#define OMAP3430_ST_SSI_STDBY_SHIFT 0
#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0)
+/* AM35xx specific CM_IDLEST1_CORE bits */
+#define AM35XX_ST_IPSS_SHIFT 5
+#define AM35XX_ST_IPSS_MASK (1 << 5)
+
/* CM_IDLEST2_CORE */
#define OMAP3430_ST_PKA_SHIFT 4
#define OMAP3430_ST_PKA_MASK (1 << 4)
WARNING: multiple messages have this Message-ID (diff)
From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/19] AM35xx: Add clock support for new modules on AM35xx
Date: Mon, 15 Feb 2010 18:24:50 -0700 [thread overview]
Message-ID: <20100216012449.1101.58722.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100216011942.1101.14348.stgit@localhost.localdomain>
From: Ranjith Lohithakshan <ranjithl@ti.com>
This patch adds clock support for the following AM35xx modules
- Ethernet MAC
- CAN Controller (HECC)
- New MUSB OTG Controller with integrated Phy
- Video Processing Front End (VPFE)
- Additional UART (UART4)
Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clock34xx.c | 93 ++++++++++++++++++++++++++
arch/arm/mach-omap2/clock34xx.h | 4 +
arch/arm/mach-omap2/clock34xx_data.c | 118 +++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/cm-regbits-34xx.h | 10 +++
4 files changed, 225 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index d339d2b..6180a03 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -39,6 +39,16 @@
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
@@ -144,6 +154,89 @@ const struct clkops clkops_noncore_dpll_ops = {
.disable = omap3_noncore_dpll_disable,
};
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clkops clkops_am35xx_ipss_module_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clkops clkops_am35xx_ipss_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
{
/*
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 73f2109..e61e653 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -22,4 +22,8 @@ extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
extern const struct clkops clkops_noncore_dpll_ops;
+/* AM35xx-specific clkops */
+extern const struct clkops clkops_am35xx_ipss_module_wait;
+extern const struct clkops clkops_am35xx_ipss_wait;
+
#endif
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 0d04f92..d9d5b2e 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -2983,6 +2983,113 @@ static struct clk wdt1_fck = {
.recalc = &followparent_recalc,
};
+/* Clocks for AM35XX */
+static struct clk ipss_ick = {
+ .name = "ipss_ick",
+ .ops = &clkops_am35xx_ipss_wait,
+ .parent = &core_l3_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = AM35XX_EN_IPSS_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk emac_ick = {
+ .name = "emac_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_CPGMAC_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk rmii_ck = {
+ .name = "rmii_ck",
+ .ops = &clkops_null,
+ .flags = RATE_FIXED,
+ .rate = 50000000,
+};
+
+static struct clk emac_fck = {
+ .name = "emac_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &rmii_ck,
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_CPGMAC_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_am35xx = {
+ .name = "hsotgusb_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_USBOTG_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_fck_am35xx = {
+ .name = "hsotgusb_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &sys_ck,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_USBOTG_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hecc_ck = {
+ .name = "hecc_ck",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &sys_ck,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_HECC_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk vpfe_ick = {
+ .name = "vpfe_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_VPFE_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk pclk_ck = {
+ .name = "pclk_ck",
+ .ops = &clkops_null,
+ .flags = RATE_FIXED,
+ .rate = 27000000,
+};
+
+static struct clk vpfe_fck = {
+ .name = "vpfe_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &pclk_ck,
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_VPFE_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+/*
+ * The UART1/2 functional clock acts as the functional
+ * clock for UART4. No separate fclk control available.
+ */
+static struct clk uart4_ick_am35xx = {
+ .name = "uart4_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &core_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = AM35XX_EN_UART4_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/*
* clkdev
@@ -3209,6 +3316,17 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX),
+ CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
+ CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
+ CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
+ CLK("davinci_emac", "ick", &emac_ick, CK_AM35XX),
+ CLK("davinci_emac", "fck", &emac_fck, CK_AM35XX),
+ CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
+ CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
+ CLK("musb_hdrc", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
+ CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
+ CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index d18da47..c04c7c6 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -168,6 +168,12 @@
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
+/* AM35XX specific CM_ICLKEN1_CORE bits */
+#define AM35XX_EN_IPSS_MASK (1 << 4)
+#define AM35XX_EN_IPSS_SHIFT 4
+#define AM35XX_EN_UART4_MASK (1 << 23)
+#define AM35XX_EN_UART4_SHIFT 23
+
/* CM_ICLKEN2_CORE */
#define OMAP3430_EN_PKA (1 << 4)
#define OMAP3430_EN_PKA_SHIFT 4
@@ -220,6 +226,10 @@
#define OMAP3430_ST_SSI_STDBY_SHIFT 0
#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0)
+/* AM35xx specific CM_IDLEST1_CORE bits */
+#define AM35XX_ST_IPSS_SHIFT 5
+#define AM35XX_ST_IPSS_MASK (1 << 5)
+
/* CM_IDLEST2_CORE */
#define OMAP3430_ST_PKA_SHIFT 4
#define OMAP3430_ST_PKA_MASK (1 << 4)
next prev parent reply other threads:[~2010-02-16 1:26 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-16 1:24 [PATCH 00/19] OMAP: more clock/powerdomain/hwmod patches for 2.6.34 Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 01/19] OMAP: omap_device: add omap_device_is_valid() Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 02/19] OMAP: omap_device: when 'called from invalid state', print state Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 03/19] OMAP3: clock: use std _MASK suffix for CM_FCLKEN_IVA2 defines Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 04/19] OMAP3: Clock: Added IDLEST definitions for SGX Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 05/19] OMAP2/3 PM: Adding powerdomain APIs for reading the next logic and mem state Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 06/19] OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 07/19] OMAP3 PM: Adding counters for power domain logic off and mem off during retention Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 08/19] OMAP2/3 clock: Extend find_idlest() to pass back idle state value Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley [this message]
2010-02-16 1:24 ` [PATCH 09/19] AM35xx: Add clock support for new modules on AM35xx Paul Walmsley
2010-02-16 1:24 ` [PATCH 10/19] OMAP3 clock: Check return values for clk_get() Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 11/19] OMAP2/3: PRCM: fix misc. compiler warnings Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 12/19] OMAP3 clock: Remove FreqSel for 3630 Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 11:00 ` Sergei Shtylyov
2010-02-16 11:00 ` Sergei Shtylyov
2010-02-16 18:10 ` Paul Walmsley
2010-02-16 18:10 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 13/19] OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 14/19] OMAP: HWMOD: Add support for early device register into omap device layer Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 15/19] OMAP3630: Clock: Workaround for DPLL HS divider limitation Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley
2010-02-16 1:25 ` [PATCH 16/19] ARM: OMAP4 clock domain: Add check for avoiding dependency related update Paul Walmsley
2010-02-16 1:25 ` Paul Walmsley
2010-02-16 1:25 ` [PATCH 17/19] OMAP3 clock: introduce DPLL4 Jtype Paul Walmsley
2010-02-16 1:25 ` Paul Walmsley
2010-02-16 1:25 ` [PATCH 18/19] OMAP3 clock: Introduce 3630 DPLL4 HSDivider changes Paul Walmsley
2010-02-16 1:25 ` Paul Walmsley
2010-02-16 1:25 ` [PATCH 19/19] OMAP3 clock: add support for 192Mhz DPLL4M2 output Paul Walmsley
2010-02-16 1:25 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100216012449.1101.58722.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=ranjithl@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.