* Re: [lm-sensors] sensors in kernel 2.6.31
@ 2010-01-30 14:05 Hans de Goede
2010-02-20 16:45 ` Otto
2010-02-20 17:55 ` Jean Delvare
0 siblings, 2 replies; 3+ messages in thread
From: Hans de Goede @ 2010-01-30 14:05 UTC (permalink / raw)
To: lm-sensors
Hi,
Ah, dan moet je even een mailtje (in het engels) sturen naar:
lm-sensors@lm-sensors.org, met daarin dat de asus_atk0110 driver
niet werkt op jouw moederbord + het model van je moederbord.
Dan reageert de auteur van de asus_atk0110 driver vanzelf. Goed
mogelijk trouwens dat dit al gefixed is in een latere versie,
maar dat zegt hij dan wel.
NB het mengen van acp_enforce_resources=lax met de asus_atk0110 driver
is een erg slecht idee!
MvG,
Hans
On 01/30/2010 05:41 PM, Otto wrote:
> Hoi,
>
> On Sat, 30 Jan 2010, Hans de Goede wrote:
>> Dat ligt aan je moederboard, als de acpi code van je BIOS de resources
>> claimed die de hwmon chips gebruiken, dan biedt die zelfde acpi code
>> hopelijk ook een acpi interface om de chips uit te lezen. Een probleem
>> is dat deze acpi interfaces moederbord fabrikant specifiek zijn.
>> Momenteel hebben we ondersteuning voor de ACPI interface op Asus
>> borden, maar dat is het dan ook.
>
> 'k Snap het. Kan je me een hint geven waar ik verder kan zoeken /
> configureren? Ik heb namelijk een Asus:
>
> root@tommie:~# strings /dev/mem |grep P5
> P5K-V
> root@tommie:~# strings /dev/mem |grep ASUS
> ASUSTeK Computer INC.
>
> Ik heb deze gelezen:
> http://www.pubbs.net/kernel/200908/45460/
>
> en zie dat mijn machine (tommie) die ook geladen heeft:
>
> root@tommie:~# lsmod |grep asus -i
> asus_atk0110 9472 0
>
> maar, blijkbaar toch niet zonder die extra grub/boot optie kan :(.
>
> Otto
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] sensors in kernel 2.6.31
2010-01-30 14:05 [lm-sensors] sensors in kernel 2.6.31 Hans de Goede
@ 2010-02-20 16:45 ` Otto
2010-02-20 17:55 ` Jean Delvare
1 sibling, 0 replies; 3+ messages in thread
From: Otto @ 2010-02-20 16:45 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1053 bytes --]
Hi,
At the moment my Linux server is running kernel 2.6.31-19 and using the
asus_atk0110 kernel module. As I discussed with Hans de Goede in Dutch
below, unfortunately the command `sensors` is only functioning on my
system when using the 'acpi_enforce_resources=lax' kernel option. Hans
advised me to send this email, because I have an Asus motherboard and it's
a bad idea to use both the acp_enforce_resources option and the
asus_atk0110 driver.
Cheers,
Otto
Ps. More info on my system is attached in the file sysinfo.txt.
On Sat, 30 Jan 2010, Hans de Goede wrote:
> Ah, dan moet je even een mailtje (in het engels) sturen naar:
> lm-sensors@lm-sensors.org, met daarin dat de asus_atk0110 driver
> niet werkt op jouw moederbord + het model van je moederbord.
>
> Dan reageert de auteur van de asus_atk0110 driver vanzelf. Goed
> mogelijk trouwens dat dit al gefixed is in een latere versie,
> maar dat zegt hij dan wel.
>
> NB het mengen van acp_enforce_resources=lax met de asus_atk0110 driver
> is een erg slecht idee!
>
> MvG,
>
> Hans
[-- Attachment #2: Type: TEXT/PLAIN, Size: 2504 bytes --]
root@tommie:~# lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
root@tommie:~# uname -a
Linux tommie.vanouwerkerk.com 2.6.31-19-server #56-Ubuntu SMP Thu Jan 28 03:40:48 UTC 2010 x86_64 GNU/Linux
root@tommie:~# strings /dev/mem |grep P5
P5K-V
P5K-V
P5K
root@tommie:~# strings /dev/mem |grep ASUS
ASUSTeK Computer INC.
ASUSTeK Pegasus
root@tommie:~# lsmod |grep asus -i
asus_atk0110 9472 0
root@tommie:~# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] sensors in kernel 2.6.31
2010-01-30 14:05 [lm-sensors] sensors in kernel 2.6.31 Hans de Goede
2010-02-20 16:45 ` Otto
@ 2010-02-20 17:55 ` Jean Delvare
1 sibling, 0 replies; 3+ messages in thread
From: Jean Delvare @ 2010-02-20 17:55 UTC (permalink / raw)
To: lm-sensors
On Sat, 20 Feb 2010 17:45:19 +0100 (CET), Otto wrote:
> Hi,
>
> At the moment my Linux server is running kernel 2.6.31-19 and using the
> asus_atk0110 kernel module. As I discussed with Hans de Goede in Dutch
> below, unfortunately the command `sensors` is only functioning on my
> system when using the 'acpi_enforce_resources=lax' kernel option. Hans
> advised me to send this email, because I have an Asus motherboard and it's
> a bad idea to use both the acp_enforce_resources option and the
> asus_atk0110 driver.
It's not that it's a bad idea... it is simply never needed. You need
the acpi_enforce_resource parameter only if you want to use a native
hwmon driver (e.g. it87 or w83627ehf) instead of asus_atk0110. If you
use the asus_atk0110 driver, you don't need it, by definition: it is an
ACPI driver.
> Ps. More info on my system is attached in the file sysinfo.txt.
> root@tommie:~# strings /dev/mem |grep P5
> P5K-V
> P5K-V
> P5K
>
> root@tommie:~# strings /dev/mem |grep ASUS
> ASUSTeK Computer INC.
> ASUSTeK Pegasus
These are stupid and potentially dangerous commands. Use dmidecode or
any equivalent command instead.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-02-20 17:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-30 14:05 [lm-sensors] sensors in kernel 2.6.31 Hans de Goede
2010-02-20 16:45 ` Otto
2010-02-20 17:55 ` Jean Delvare
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.