From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>, linux-omap@vger.kernel.org
Subject: [PATCH 3/6] AM35x: Add missing GPIO mux config for EHCI port
Date: Thu, 25 Feb 2010 15:03:11 -0800 [thread overview]
Message-ID: <20100225230311.26233.97139.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100225230116.26233.65157.stgit@baageli.muru.com>
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Adding GPIO mux config used for PHY reset of EHCI port on base board.
We get below failure message without this patch,
"hub 1-0:1.0: unable to enumerate USB device on port 1"
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-am3517evm.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index e6b8967..aee0a02 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -301,6 +301,9 @@ static void __init am3517_evm_init(void)
ARRAY_SIZE(am3517_evm_devices));
omap_serial_init();
+
+ /* Configure GPIO for EHCI port */
+ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
usb_ehci_init(&ehci_pdata);
/* DSS */
am3517_evm_display_init();
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] AM35x: Add missing GPIO mux config for EHCI port
Date: Thu, 25 Feb 2010 15:03:11 -0800 [thread overview]
Message-ID: <20100225230311.26233.97139.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100225230116.26233.65157.stgit@baageli.muru.com>
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Adding GPIO mux config used for PHY reset of EHCI port on base board.
We get below failure message without this patch,
"hub 1-0:1.0: unable to enumerate USB device on port 1"
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-am3517evm.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index e6b8967..aee0a02 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -301,6 +301,9 @@ static void __init am3517_evm_init(void)
ARRAY_SIZE(am3517_evm_devices));
omap_serial_init();
+
+ /* Configure GPIO for EHCI port */
+ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
usb_ehci_init(&ehci_pdata);
/* DSS */
am3517_evm_display_init();
next prev parent reply other threads:[~2010-02-25 23:02 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-25 23:02 [PATCH 0/6] omap i2c init fix and trivial board changes for 2.6.34 Tony Lindgren
2010-02-25 23:02 ` Tony Lindgren
2010-02-25 23:03 ` [PATCH 1/6] omap: i2c: Fix muxing for command line enabled bus Tony Lindgren
2010-02-25 23:03 ` Tony Lindgren
2010-02-25 23:03 ` [PATCH 2/6] Zoom3: Defconfig update Tony Lindgren
2010-02-25 23:03 ` Tony Lindgren
2010-02-25 23:03 ` Tony Lindgren [this message]
2010-02-25 23:03 ` [PATCH 3/6] AM35x: Add missing GPIO mux config for EHCI port Tony Lindgren
2010-02-25 23:03 ` [PATCH 4/6] AM35x: Enable OMAP_MUX in defconfig Tony Lindgren
2010-02-25 23:03 ` Tony Lindgren
2010-02-25 23:03 ` [PATCH 5/6] AM3517 EVM: Enable I2C support Tony Lindgren
2010-02-25 23:03 ` Tony Lindgren
2010-02-25 23:03 ` [PATCH 6/6] AM3517EVM : correct typo - tca6416 mispelt as tca6516 Tony Lindgren
2010-02-25 23:03 ` Tony Lindgren
2010-02-26 23:36 ` [PATCH 7/6] omap2: Initialize Menelaus and MMC for N8X0 Tony Lindgren
2010-02-26 23:36 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100225230311.26233.97139.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=ajay.gupta@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.