From: Josef Bacik <josef@redhat.com>
To: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Josef Bacik <josef@redhat.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
akpm@linux-foundation.org, linux-fsdevel@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] cleanup __generic_block_fiemap and fix a few minor issues
Date: Thu, 4 Mar 2010 12:12:54 -0500 [thread overview]
Message-ID: <20100304171253.GB5722@localhost.localdomain> (raw)
In-Reply-To: <20100304085021.1b4e5c58.randy.dunlap@oracle.com>
On Thu, Mar 04, 2010 at 08:50:21AM -0800, Randy Dunlap wrote:
> On Thu, 4 Mar 2010 11:20:40 -0500 Josef Bacik wrote:
>
> > Ahh yes thats much nicer, thank you. Here is my updated patch with your
> > suggestions. Thanks,
> >
> > Signed-off-by: Josef Bacik <josef@redhat.com>
> > ---
> > fs/ioctl.c | 81 +++++++++++++++++++++++++++++----------------------
> > include/linux/fs.h | 5 ++-
> > 2 files changed, 49 insertions(+), 37 deletions(-)
> >
> > diff --git a/fs/ioctl.c b/fs/ioctl.c
> > index 6c75110..64fed0b 100644
> > --- a/fs/ioctl.c
> > +++ b/fs/ioctl.c
> > @@ -228,13 +228,22 @@ static int ioctl_fiemap(struct file *filp, unsigned long arg)
> >
> > #ifdef CONFIG_BLOCK
> >
> > -#define blk_to_logical(inode, blk) (blk << (inode)->i_blkbits)
> > -#define logical_to_blk(inode, offset) (offset >> (inode)->i_blkbits);
> > +static inline sector_t logical_to_blk(struct inode *inode, loff_t offset)
> > +{
> > + return (offset >> inode->i_blkbits);
> > +}
> > +
> > +static inline loff_t blk_to_logical(struct inode *inode, sector_t blk)
> > +{
> > + return (blk << inode->i_blkbits);
> > +}
> >
> > /**
> > * __generic_block_fiemap - FIEMAP for block based inodes (no locking)
> > * @inode - the inode to map
> > - * @arg - the pointer to userspace where we copy everything to
> > + * @fieinfo - the fiemap info struct that will be passed back to userspace
> > + * @start - where to start mapping in the inode
> > + * @len - how much space to map
> > * @get_block - the fs's get_block function
> > *
> > * This does FIEMAP for block based inodes. Basically it will just loop
>
> Please fix the kernel-doc notation. Function parameter notation is like:
>
> * @start: where to start mapping in the inode
Sounds good, fixed below. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
---
fs/ioctl.c | 85 +++++++++++++++++++++++++++++----------------------
include/linux/fs.h | 5 ++-
2 files changed, 51 insertions(+), 39 deletions(-)
diff --git a/fs/ioctl.c b/fs/ioctl.c
index 6c75110..f330fec 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -228,14 +228,23 @@ static int ioctl_fiemap(struct file *filp, unsigned long arg)
#ifdef CONFIG_BLOCK
-#define blk_to_logical(inode, blk) (blk << (inode)->i_blkbits)
-#define logical_to_blk(inode, offset) (offset >> (inode)->i_blkbits);
+static inline sector_t logical_to_blk(struct inode *inode, loff_t offset)
+{
+ return (offset >> inode->i_blkbits);
+}
+
+static inline loff_t blk_to_logical(struct inode *inode, sector_t blk)
+{
+ return (blk << inode->i_blkbits);
+}
/**
* __generic_block_fiemap - FIEMAP for block based inodes (no locking)
- * @inode - the inode to map
- * @arg - the pointer to userspace where we copy everything to
- * @get_block - the fs's get_block function
+ * @inode: the inode to map
+ * @fieinfo: the fiemap info struct that will be passed back to userspace
+ * @start: where to start mapping in the inode
+ * @len: how much space to map
+ * @get_block: the fs's get_block function
*
* This does FIEMAP for block based inodes. Basically it will just loop
* through get_block until we hit the number of extents we want to map, or we
@@ -250,46 +259,46 @@ static int ioctl_fiemap(struct file *filp, unsigned long arg)
*/
int __generic_block_fiemap(struct inode *inode,
- struct fiemap_extent_info *fieinfo, u64 start,
- u64 len, get_block_t *get_block)
+ struct fiemap_extent_info *fieinfo, loff_t start,
+ loff_t len, get_block_t *get_block)
{
- struct buffer_head tmp;
- unsigned long long start_blk;
- long long length = 0, map_len = 0;
+ struct buffer_head map_bh;
+ sector_t start_blk, last_blk;
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
- int ret = 0, past_eof = 0, whole_file = 0;
+ bool past_eof = false, whole_file = false;
+ int ret = 0;
- if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
+ ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC);
+ if (ret)
return ret;
- start_blk = logical_to_blk(inode, start);
-
- length = (long long)min_t(u64, len, i_size_read(inode));
- if (length < len)
- whole_file = 1;
+ if (len >= i_size_read(inode)) {
+ whole_file = true;
+ len = i_size_read(inode);
+ }
- map_len = length;
+ start_blk = logical_to_blk(inode, start);
+ last_blk = logical_to_blk(inode, start + len - 1);
do {
/*
* we set b_size to the total size we want so it will map as
* many contiguous blocks as possible at once
*/
- memset(&tmp, 0, sizeof(struct buffer_head));
- tmp.b_size = map_len;
+ memset(&map_bh, 0, sizeof(struct buffer_head));
+ map_bh.b_size = len;
- ret = get_block(inode, start_blk, &tmp, 0);
+ ret = get_block(inode, start_blk, &map_bh, 0);
if (ret)
break;
/* HOLE */
- if (!buffer_mapped(&tmp)) {
- length -= blk_to_logical(inode, 1);
+ if (!buffer_mapped(&map_bh)) {
start_blk++;
/*
- * we want to handle the case where there is an
+ * We want to handle the case where there is an
* allocated block at the front of the file, and then
* nothing but holes up to the end of the file properly,
* to make sure that extent at the front gets properly
@@ -297,11 +306,11 @@ int __generic_block_fiemap(struct inode *inode,
*/
if (!past_eof &&
blk_to_logical(inode, start_blk) >=
- blk_to_logical(inode, 0)+i_size_read(inode))
+ blk_to_logical(inode, 0) + i_size_read(inode))
past_eof = 1;
/*
- * first hole after going past the EOF, this is our
+ * First hole after going past the EOF, this is our
* last extent
*/
if (past_eof && size) {
@@ -309,15 +318,18 @@ int __generic_block_fiemap(struct inode *inode,
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
- break;
+ } else if (size) {
+ ret = fiemap_fill_next_extent(fieinfo, logical,
+ phys, size, flags);
+ size = 0;
}
/* if we have holes up to/past EOF then we're done */
- if (length <= 0 || past_eof)
+ if (start_blk > last_blk || past_eof || ret)
break;
} else {
/*
- * we have gone over the length of what we wanted to
+ * We have gone over the length of what we wanted to
* map, and it wasn't the entire file, so add the extent
* we got last time and exit.
*
@@ -331,7 +343,7 @@ int __generic_block_fiemap(struct inode *inode,
* are good to go, just add the extent to the fieinfo
* and break
*/
- if (length <= 0 && !whole_file) {
+ if (start_blk > last_blk && !whole_file) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
@@ -351,11 +363,10 @@ int __generic_block_fiemap(struct inode *inode,
}
logical = blk_to_logical(inode, start_blk);
- phys = blk_to_logical(inode, tmp.b_blocknr);
- size = tmp.b_size;
+ phys = blk_to_logical(inode, map_bh.b_blocknr);
+ size = map_bh.b_size;
flags = FIEMAP_EXTENT_MERGED;
- length -= tmp.b_size;
start_blk += logical_to_blk(inode, size);
/*
@@ -364,14 +375,14 @@ int __generic_block_fiemap(struct inode *inode,
* is marked with FIEMAP_EXTENT_LAST
*/
if (!past_eof &&
- logical+size >=
- blk_to_logical(inode, 0)+i_size_read(inode))
- past_eof = 1;
+ logical + size >=
+ blk_to_logical(inode, 0) + i_size_read(inode))
+ past_eof = true;
}
cond_resched();
} while (1);
- /* if ret is 1 then we just hit the end of the extent array */
+ /* If ret is 1 then we just hit the end of the extent array */
if (ret == 1)
ret = 0;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ebb1cd5..7e6e47f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2313,8 +2313,9 @@ extern int vfs_fstatat(int , char __user *, struct kstat *, int);
extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
unsigned long arg);
extern int __generic_block_fiemap(struct inode *inode,
- struct fiemap_extent_info *fieinfo, u64 start,
- u64 len, get_block_t *get_block);
+ struct fiemap_extent_info *fieinfo,
+ loff_t start, loff_t len,
+ get_block_t *get_block);
extern int generic_block_fiemap(struct inode *inode,
struct fiemap_extent_info *fieinfo, u64 start,
u64 len, get_block_t *get_block);
--
1.6.5.rc2
next prev parent reply other threads:[~2010-03-04 17:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-03 16:37 [PATCH] cleanup __generic_block_fiemap and fix a few minor issues Josef Bacik
2010-03-04 16:03 ` Linus Torvalds
2010-03-04 16:20 ` Josef Bacik
2010-03-04 16:50 ` Randy Dunlap
2010-03-04 17:12 ` Josef Bacik [this message]
2010-03-04 17:23 ` Randy Dunlap
2010-03-29 18:05 ` Josef Bacik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100304171253.GB5722@localhost.localdomain \
--to=josef@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=randy.dunlap@oracle.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.