[ath9k-devel] [RFC] ath9k: 4ms frame length table update

[ath9k-devel] [RFC] ath9k: 4ms frame length table update

[selvam]

Hi,

The 4 ms frame length table is updated to support up to MCS 31.

These values are calculated based on the equation 9.1 from the IEEE 802.11n
standard.
These values are rounded off to multiple of 4 bytes. If the final value is
greater than 65535 then it is changed to 65532, since the maximum A-MPDU
length is 65535 bytes.


Selvam.T


diff --git a/drivers/net/wireless/ath/ath9k/xmit.c
b/drivers/net/wireless/ath/ath9k/xmit.c
index 8359362..ba5ee72 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -71,24 +71,36 @@ static void ath_tx_rc_status(struct ath_buf *bf, struct
ath_desc *ds,
                  int nbad, int txok, bool update_rc);

 enum {
-    MCS_DEFAULT,
+    MCS_HT20,
+    MCS_HT20_SGI,
     MCS_HT40,
     MCS_HT40_SGI,
 };

-static int ath_max_4ms_framelen[3][16] = {
-    [MCS_DEFAULT] = {
-        3216,  6434,  9650,  12868, 19304, 25740,  28956,  32180,
-        6430,  12860, 19300, 25736, 38600, 51472,  57890,  64320,
+static int ath_max_4ms_framelen[4][32] = {
+    [MCS_HT20] = {
+        3212,  6432,  9648,  12864,  19300,  25736,  28952,  32172,
+        6424,  12852, 19280, 25708,  38568,  51424,  57852,  64280,
+        9628,  19260, 28896, 38528,  57792,  65532,  65532,  65532,
+        12828, 25656, 38488, 51320,  65532,  65532,  65532,  65532,
     },
+    [MCS_HT20_SGI] = {
+        3572,  7144,  10720,  14296,  21444,  28596,  32172,  35744,
+        7140,  14284, 21428,  28568,  42856,  57144,  64288,  65532,
+        10700, 21408, 32112,  42816,  64228,  65532,  65532,  65532,
+        14256, 28516, 42780,  57040,  65532,  65532,  65532,  65532,
+        },
     [MCS_HT40] = {
-        6684,  13368, 20052, 26738, 40104, 53476,  60156,  66840,
-        13360, 26720, 40080, 53440, 80160, 106880, 120240, 133600,
+        6680,  13360,  20044,  26724,  40092,  53456,  60140,  65532,
+        13348, 26700,  40052,  53400,  65532,  65532,  65532,  65532,
+        20004, 40008,  60016,  65532,  65532,  65532,  65532,  65532,
+        26644, 53292,  65532,  65532,  65532,  65532,  65532,  65532,
     },
     [MCS_HT40_SGI] = {
-        /* TODO: Only MCS 7 and 15 updated, recalculate the rest */
-        6684,  13368, 20052, 26738, 40104, 53476,  60156,  74200,
-        13360, 26720, 40080, 53440, 80160, 106880, 120240, 148400,
+        7420,  14844,  22272,  29696,  44544,  59396,  65532,  65532,
+        14832, 29668,  44504,  59340,  65532,  65532,  65532,  65532,
+        22232, 44464,  65532,  65532,  65532,  65532,  65532,  65532,
+        29616, 59232,  65532,  65532,  65532,  65532,  65532,  65532,
     }
 };

@@ -508,13 +520,19 @@ static u32 ath_lookup_rate(struct ath_softc *sc,
struct ath_buf *bf,
                 break;
             }

-            if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
-                modeidx = MCS_HT40_SGI;
-            else if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
-                modeidx = MCS_HT40;
-            else
-                modeidx = MCS_DEFAULT;
-
+            if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) {
+                if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
+                    modeidx = MCS_HT40_SGI;
+                else
+                    modeidx = MCS_HT40;
+            }
+            else {
+                if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
+                    modeidx = MCS_HT20_SGI;
+                else
+                    modeidx = MCS_HT20;
+            }
+
             frmlen = ath_max_4ms_framelen[modeidx][rates[i].idx];
             max_4ms_framelen = min(max_4ms_framelen, frmlen);
         }
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100318/7a34b4e3/attachment.htm 

[ath9k-devel] [RFC] ath9k: 4ms frame length table update

[Luis R. Rodriguez]

On Wed, Mar 17, 2010 at 11:37:29PM -0700, selvam wrote:
> Hi,
> 
> The 4 ms frame length table is updated to support up to MCS 31.
> 
> These values are calculated based on the equation 9.1 from the IEEE 802.11n standard.
> These values are rounded off to multiple of 4 bytes. If the final value is greater than 65535 then it is changed to 65532, since the maximum A-MPDU length is 65535 bytes.

Thanks for this patch, but can you elaborate on what your patch does other
than the above. For example, you may want to mention that although the current
ath9k driver does not support up to MCS31 your patch would enable such support
for future chipsets which could be supported. You also forgot to Signed-off-by
it, and provide a clearer commit log entry. Check git log for examples on
wireless-testing, also read:

http://wireless.kernel.org/en/developers/Documentation/SubmittingPatches
http://wireless.kernel.org/en/developers/Documentation

  Luis

Re: [ath9k-devel] [RFC] ath9k: 4ms frame length table update

[Luis R. Rodriguez]

On Wed, Mar 17, 2010 at 11:37:29PM -0700, selvam wrote:
> Hi,
> 
> The 4 ms frame length table is updated to support up to MCS 31.
> 
> These values are calculated based on the equation 9.1 from the IEEE 802.11n standard.
> These values are rounded off to multiple of 4 bytes. If the final value is greater than 65535 then it is changed to 65532, since the maximum A-MPDU length is 65535 bytes.

Thanks for this patch, but can you elaborate on what your patch does other
than the above. For example, you may want to mention that although the current
ath9k driver does not support up to MCS31 your patch would enable such support
for future chipsets which could be supported. You also forgot to Signed-off-by
it, and provide a clearer commit log entry. Check git log for examples on
wireless-testing, also read:

http://wireless.kernel.org/en/developers/Documentation/SubmittingPatches
http://wireless.kernel.org/en/developers/Documentation

  Luis

[ath9k-devel] [RFC] ath9k: 4ms frame length table update

[Vasanthakumar Thiagarajan]

On Thu, Mar 18, 2010 at 09:30:34PM +0530, Luis R. Rodriguez wrote:
> On Wed, Mar 17, 2010 at 11:37:29PM -0700, selvam wrote:
> > Hi,
> > 
> > The 4 ms frame length table is updated to support up to MCS 31.
> > 
> > These values are calculated based on the equation 9.1 from the IEEE 802.11n standard.
> > These values are rounded off to multiple of 4 bytes. If the final value is greater than 65535 then it is changed to 65532, since the maximum A-MPDU length is 65535 bytes.
> 
> Thanks for this patch, but can you elaborate on what your patch does other
> than the above. For example, you may want to mention that although the current
> ath9k driver does not support up to MCS31 your patch would enable such support
> for future chipsets which could be supported. You also forgot to Signed-off-by
> it, and provide a clearer commit log entry. Check git log for examples on
> wireless-testing, also read:
> 

Also, rate control component of ath9k is not generic, it is specific
to ath9k. So this sort of patches make sense only when ath9k supports hw with
three chains, currently ath9k does not have support for those hw.

Vasanth

Re: [ath9k-devel] [RFC] ath9k: 4ms frame length table update

[Vasanthakumar Thiagarajan]

On Thu, Mar 18, 2010 at 09:30:34PM +0530, Luis R. Rodriguez wrote:
> On Wed, Mar 17, 2010 at 11:37:29PM -0700, selvam wrote:
> > Hi,
> > 
> > The 4 ms frame length table is updated to support up to MCS 31.
> > 
> > These values are calculated based on the equation 9.1 from the IEEE 802.11n standard.
> > These values are rounded off to multiple of 4 bytes. If the final value is greater than 65535 then it is changed to 65532, since the maximum A-MPDU length is 65535 bytes.
> 
> Thanks for this patch, but can you elaborate on what your patch does other
> than the above. For example, you may want to mention that although the current
> ath9k driver does not support up to MCS31 your patch would enable such support
> for future chipsets which could be supported. You also forgot to Signed-off-by
> it, and provide a clearer commit log entry. Check git log for examples on
> wireless-testing, also read:
> 

Also, rate control component of ath9k is not generic, it is specific
to ath9k. So this sort of patches make sense only when ath9k supports hw with
three chains, currently ath9k does not have support for those hw.

Vasanth