From: Stephen Hemminger <shemminger@vyatta.com>
To: Jeff Garzik <jeff@garzik.org>, David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Subject: [PATCH 2/2] ethtool: RXHASH flag support
Date: Mon, 29 Mar 2010 17:53:52 -0700 [thread overview]
Message-ID: <20100329175352.38008e05@nehalam> (raw)
In-Reply-To: <20100329174727.4654e19c@nehalam>
Add support for RXHASH flag in ethtool offload.
Update to current net-next sanitized version of ethtool.h
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
---
ethtool-copy.h | 32 +++++++++++++++++++++++++-------
ethtool.8 | 4 ++++
ethtool.c | 42 +++++++++++++++++++++++++++++++++++++-----
3 files changed, 66 insertions(+), 12 deletions(-)
diff --git a/ethtool-copy.h b/ethtool-copy.h
index 8681f5e..0cf8f33 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -36,7 +36,7 @@ struct ethtool_cmd {
__u32 reserved[2];
};
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+static __inline__ void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
__u32 speed)
{
@@ -44,7 +44,7 @@ static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
ep->speed_hi = (__u16)(speed >> 16);
}
-static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+static __inline__ __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
{
return (ep->speed_hi << 16) | ep->speed;
}
@@ -61,6 +61,13 @@ struct ethtool_drvinfo {
/* For PCI devices, use pci_name(pci_dev). */
char reserved1[32];
char reserved2[12];
+ /*
+ * Some struct members below are filled in
+ * using ops->get_sset_count(). Obtaining
+ * this info from ethtool_drvinfo is now
+ * deprecated; Use ETHTOOL_GSSET_INFO
+ * instead.
+ */
__u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
__u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
__u32 testinfo_len;
@@ -253,6 +260,17 @@ struct ethtool_gstrings {
__u8 data[0];
};
+struct ethtool_sset_info {
+ __u32 cmd; /* ETHTOOL_GSSET_INFO */
+ __u32 reserved;
+ __u64 sset_mask; /* input: each bit selects an sset to query */
+ /* output: each bit a returned sset */
+ __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
+ in sset_mask. One bit implies one
+ __u32, two bits implies two
+ __u32's, etc. */
+};
+
enum ethtool_test_flags {
ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
@@ -292,6 +310,7 @@ struct ethtool_perm_addr {
enum ethtool_flags {
ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
+ ETH_FLAG_RXHASH = (1 << 28),
};
/* The following structures are for supporting RX network flow
@@ -389,8 +408,6 @@ struct ethtool_rx_ntuple_flow_spec {
#define ETHTOOL_RXNTUPLE_ACTION_DROP -1
};
-#define ETHTOOL_MAX_NTUPLE_LIST_ENTRY 1024
-#define ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY 14
struct ethtool_rx_ntuple {
__u32 cmd;
struct ethtool_rx_ntuple_flow_spec fs;
@@ -408,6 +425,7 @@ struct ethtool_flash {
char data[ETHTOOL_FLASH_MAX_FILENAME];
};
+
/* CMDs currently supported */
#define ETHTOOL_GSET 0x00000001 /* Get settings. */
#define ETHTOOL_SSET 0x00000002 /* Set settings. */
@@ -463,9 +481,9 @@ struct ethtool_flash {
#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
-
-#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
diff --git a/ethtool.8 b/ethtool.8
index eb6430b..a7b43d5 100644
--- a/ethtool.8
+++ b/ethtool.8
@@ -170,6 +170,7 @@ ethtool \- Display or change ethernet card settings
.B2 gso on off
.B2 gro on off
.B2 lro on off
+.B2 rxhash on off
.B ethtool \-p|\-\-identify
.I ethX
@@ -362,6 +363,9 @@ Specifies whether generic receive offload should be enabled
.A2 lro on off
Specifies whether large receive offload should be enabled
.TP
+.A2 rxhash on off
+Specifies whether receive hashing offload should be enabled
+.TP
.B \-p \-\-identify
Initiates adapter-specific action intended to enable an operator to
easily identify the adapter by sight. Typically this involves
diff --git a/ethtool.c b/ethtool.c
index fc9e419..26ab94b 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -173,6 +173,7 @@ static struct option {
" [ gro on|off ]\n"
" [ lro on|off ]\n"
" [ ntuple on|off ]\n"
+ " [ rxhash on|off ]\n"
},
{ "-i", "--driver", MODE_GDRV, "Show driver information" },
{ "-d", "--register-dump", MODE_GREGS, "Do a register dump",
@@ -257,6 +258,7 @@ static int off_gso_wanted = -1;
static int off_lro_wanted = -1;
static int off_gro_wanted = -1;
static int off_ntuple_wanted = -1;
+static int off_rxhash_wanted = -1;
static struct ethtool_pauseparam epause;
static int gpause_changed = 0;
@@ -382,6 +384,7 @@ static struct cmdline_info cmdline_offload[] = {
{ "lro", CMDL_BOOL, &off_lro_wanted, NULL },
{ "gro", CMDL_BOOL, &off_gro_wanted, NULL },
{ "ntuple", CMDL_BOOL, &off_ntuple_wanted, NULL },
+ { "rxhash", CMDL_BOOL, &off_rxhash_wanted, NULL },
};
static struct cmdline_info cmdline_pause[] = {
@@ -1526,7 +1529,7 @@ static int dump_coalesce(void)
}
static int dump_offload(int rx, int tx, int sg, int tso, int ufo, int gso,
- int gro, int lro, int ntuple)
+ int gro, int lro, int ntuple, int rxhash)
{
fprintf(stdout,
"rx-checksumming: %s\n"
@@ -1537,7 +1540,8 @@ static int dump_offload(int rx, int tx, int sg, int tso, int ufo, int gso,
"generic-segmentation-offload: %s\n"
"generic-receive-offload: %s\n"
"large-receive-offload: %s\n"
- "ntuple-filters: %s\n",
+ "ntuple-filters: %s\n"
+ "receive-hashing: %s\n",
rx ? "on" : "off",
tx ? "on" : "off",
sg ? "on" : "off",
@@ -1546,7 +1550,8 @@ static int dump_offload(int rx, int tx, int sg, int tso, int ufo, int gso,
gso ? "on" : "off",
gro ? "on" : "off",
lro ? "on" : "off",
- ntuple ? "on" : "off");
+ ntuple ? "on" : "off",
+ rxhash ? "on" : "off");
return 0;
}
@@ -1863,7 +1868,7 @@ static int do_goffload(int fd, struct ifreq *ifr)
{
struct ethtool_value eval;
int err, allfail = 1, rx = 0, tx = 0, sg = 0;
- int tso = 0, ufo = 0, gso = 0, gro = 0, lro = 0, ntuple = 0;
+ int tso = 0, ufo = 0, gso = 0, gro = 0, lro = 0, ntuple = 0, rxhash = 0;
fprintf(stdout, "Offload parameters for %s:\n", devname);
@@ -1935,6 +1940,7 @@ static int do_goffload(int fd, struct ifreq *ifr)
} else {
lro = (eval.data & ETH_FLAG_LRO) != 0;
ntuple = (eval.data & ETH_FLAG_NTUPLE) != 0;
+ rxhash = (eval.data & ETH_FLAG_RXHASH) != 0;
allfail = 0;
}
@@ -1953,7 +1959,7 @@ static int do_goffload(int fd, struct ifreq *ifr)
return 83;
}
- return dump_offload(rx, tx, sg, tso, ufo, gso, gro, lro, ntuple);
+ return dump_offload(rx, tx, sg, tso, ufo, gso, gro, lro, ntuple, rxhash);
}
static int do_soffload(int fd, struct ifreq *ifr)
@@ -2087,6 +2093,29 @@ static int do_soffload(int fd, struct ifreq *ifr)
return 93;
}
}
+ if (off_rxhash_wanted >= 0) {
+ changed = 1;
+ eval.cmd = ETHTOOL_GFLAGS;
+ eval.data = 0;
+ ifr->ifr_data = (caddr_t)&eval;
+ err = ioctl(fd, SIOCETHTOOL, ifr);
+ if (err) {
+ perror("Cannot get device flag settings");
+ return 91;
+ }
+
+ eval.cmd = ETHTOOL_SFLAGS;
+ if (off_rxhash_wanted)
+ eval.data |= ETH_FLAG_RXHASH;
+ else
+ eval.data &= ~ETH_FLAG_RXHASH;
+
+ err = ioctl(fd, SIOCETHTOOL, ifr);
+ if (err) {
+ perror("Cannot set receive hash settings");
+ return 93;
+ }
+ }
if (!changed) {
fprintf(stdout, "no offload settings changed\n");
@@ -2655,6 +2684,9 @@ static int do_srxntuple(int fd, struct ifreq *ifr)
return 0;
}
+#define ETHTOOL_MAX_NTUPLE_LIST_ENTRY 1024
+#define ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY 14
+
static int do_grxntuple(int fd, struct ifreq *ifr)
{
struct ethtool_gstrings *strings;
--
1.6.3.3
next prev parent reply other threads:[~2010-03-30 0:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-28 22:44 [PATCH 1/2] netdev: add support for Receive Side Scaling hash control Stephen Hemminger
2010-03-28 22:47 ` [PATCH 2/2] ethtool: add RSS command flag Stephen Hemminger
2010-03-30 0:47 ` [PATCH 1/2] netdev: ethtool RXHASH flag Stephen Hemminger
2010-03-30 0:53 ` Stephen Hemminger [this message]
2010-03-30 17:29 ` [PATCH 2/2] ethtool: RXHASH flag support Jeff Garzik
2010-03-30 17:32 ` Stephen Hemminger
2010-03-30 17:37 ` Jeff Garzik
2010-03-30 21:05 ` Stephen Hemminger
2010-03-30 21:08 ` Jeff Garzik
2010-03-30 21:31 ` Stephen Hemminger
2010-03-30 22:58 ` Jeff Garzik
2010-03-30 17:19 ` [PATCH 1/2] netdev: ethtool RXHASH flag Jeff Garzik
2010-03-31 6:52 ` David Miller
2010-03-31 6:52 ` [PATCH 1/2] netdev: add support for Receive Side Scaling hash control David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100329175352.38008e05@nehalam \
--to=shemminger@vyatta.com \
--cc=davem@davemloft.net \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.