[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Luis R. Rodriguez]

Thanks to Pavel for the comat-wireless patch the bleeding edge
compat-wireless tarballs should now have ath9k_htc.

  Luis

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[mistah]

No, the tarball haven't got it.
I took the link from
http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge
 i.e.
http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2but
there is no ath9k_htc driver in it.

Mistah
<http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge>
2010/3/28 Luis R. Rodriguez <mcgrof@gmail.com>

> Thanks to Pavel for the comat-wireless patch the bleeding edge
> compat-wireless tarballs should now have ath9k_htc.
>
>  Luis
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100328/bb0d97bc/attachment.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[mistah]

Whoops: hasn't.

2010/3/28 mistah <mistahz@gmail.com>

> No, the tarball haven't got it.
> I took the link from
> http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge
>  i.e.
> http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2but there is no ath9k_htc driver in it.
>
> Mistah
>
> <http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge>
> 2010/3/28 Luis R. Rodriguez <mcgrof@gmail.com>
>
> Thanks to Pavel for the comat-wireless patch the bleeding edge
>> compat-wireless tarballs should now have ath9k_htc.
>>
>>  Luis
>> _______________________________________________
>> ath9k-devel mailing list
>> ath9k-devel at lists.ath9k.org
>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100328/9836af70/attachment.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Luis R. Rodriguez]

On Sun, Mar 28, 2010 at 10:39 AM, mistah <mistahz@gmail.com> wrote:
> No, the tarball haven't got it.
> I took the link from
> http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge?i.e.?http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
> but there is no ath9k_htc driver in it.

Try now.

  Luis

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Luis R. Rodriguez]

On Sun, Mar 28, 2010 at 4:31 PM, Luis R. Rodriguez <mcgrof@gmail.com> wrote:
> On Sun, Mar 28, 2010 at 10:39 AM, mistah <mistahz@gmail.com> wrote:
>> No, the tarball haven't got it.
>> I took the link from
>> http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge?i.e.?http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
>> but there is no ath9k_htc driver in it.
>
> Try now.

You can use

./scripts/driver-select ath9k_htc

  Luis

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[mistah]

The ath9k_htc has stil to be added to the README.
It compiles and after the make install i rebooted and tryed to plug the usb
dongle.
It is a TP Link TL-WN722N (it has got the same chipset of the WN721N).
I am under ubuntu 9.10 2.6.31-21-generic. I have another atheros card in
this system (it uses the ath5k module). I removed the package
linux-backports-modules-karmic before compiling but the module doesnt seem
to work. Am I wrong in someting?
This is the output I got:

sudo modprobe ath9k_htc
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be
ignored in a future release.
WARNING: Error inserting ath9k_common
(/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting mac80211
(/lib/modules/2.6.31-21-generic/updates/cw/mac80211.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
FATAL: Error inserting ath9k_htc
(/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko):
Unknown symbol in module, or unknown parameter (see dmesg)

And this is the dmesg output:
[  190.524171] usb 1-5: new high speed USB device using ehci_hcd and address
5
[  190.673230] usb 1-5: configuration #1 chosen from 1 choice
[  190.769914] ath9k_hw: Unknown symbol ath_hw_setbssidmask
[  190.770410] ath9k_hw: disagrees about version of symbol
ath_regd_get_band_ctl
[  190.770422] ath9k_hw: Unknown symbol ath_regd_get_band_ctl
[  243.301032] ath9k_hw: Unknown symbol ath_hw_setbssidmask
[  243.301304] ath9k_hw: disagrees about version of symbol
ath_regd_get_band_ctl
[  243.301310] ath9k_hw: Unknown symbol ath_regd_get_band_ctl

Thank you very much for your work.


2010/3/29 Luis R. Rodriguez <mcgrof@gmail.com>

> On Sun, Mar 28, 2010 at 4:31 PM, Luis R. Rodriguez <mcgrof@gmail.com>
> wrote:
> > On Sun, Mar 28, 2010 at 10:39 AM, mistah <mistahz@gmail.com> wrote:
> >> No, the tarball haven't got it.
> >> I took the link from
> >>
> http://linuxwireless.org/en/users/Download#Where_to_download_bleeding_edge
>  i.e.
> http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
> >> but there is no ath9k_htc driver in it.
> >
> > Try now.
>
> You can use
>
> ./scripts/driver-select ath9k_htc
>
>  Luis
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100329/22e0bd42/attachment.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Luis R. Rodriguez]

On Sun, Mar 28, 2010 at 6:31 PM, mistah <mistahz@gmail.com> wrote:
> The ath9k_htc has stil to be added to the README.
> It compiles and after the make install i rebooted and tryed to plug the usb
> dongle.
> It is a TP Link TL-WN722N (it has got the same chipset of the WN721N).
> I am under ubuntu 9.10 2.6.31-21-generic. I have another atheros card in
> this system (it uses the ath5k module). I removed the package
> linux-backports-modules-karmic before compiling but the module doesnt seem
> to work. Am I wrong in someting?
> This is the output I got:
> sudo modprobe ath9k_htc
> WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be
> ignored in a future release.
> WARNING: Error inserting ath9k_common
> (/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> WARNING: Error inserting mac80211
> (/lib/modules/2.6.31-21-generic/updates/cw/mac80211.ko): Unknown symbol in
> module, or unknown parameter (see dmesg)
> FATAL: Error inserting ath9k_htc
> (/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> And this is the dmesg output:
> [ ?190.524171] usb 1-5: new high speed USB device using ehci_hcd and address
> 5
> [ ?190.673230] usb 1-5: configuration #1 chosen from 1 choice
> [ ?190.769914] ath9k_hw: Unknown symbol ath_hw_setbssidmask
> [ ?190.770410] ath9k_hw: disagrees about version of symbol
> ath_regd_get_band_ctl
> [ ?190.770422] ath9k_hw: Unknown symbol ath_regd_get_band_ctl
> [ ?243.301032] ath9k_hw: Unknown symbol ath_hw_setbssidmask
> [ ?243.301304] ath9k_hw: disagrees about version of symbol
> ath_regd_get_band_ctl
> [ ?243.301310] ath9k_hw: Unknown symbol ath_regd_get_band_ctl

Please provide the output of:

for i in ath9k_hw ath9k_common ath9k ath9k_htc ; do modprobe -l $i; done

The idea is all of these should be on the same path.

  Luis

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Yongheng Qi]

dear all

I want to know the different between ath9k with ath9k_htc.

Thanks

2010/3/29 Luis R. Rodriguez <mcgrof@gmail.com>

> On Sun, Mar 28, 2010 at 6:31 PM, mistah <mistahz@gmail.com> wrote:
> > The ath9k_htc has stil to be added to the README.
> > It compiles and after the make install i rebooted and tryed to plug the
> usb
> > dongle.
> > It is a TP Link TL-WN722N (it has got the same chipset of the WN721N).
> > I am under ubuntu 9.10 2.6.31-21-generic. I have another atheros card in
> > this system (it uses the ath5k module). I removed the package
> > linux-backports-modules-karmic before compiling but the module doesnt
> seem
> > to work. Am I wrong in someting?
> > This is the output I got:
> > sudo modprobe ath9k_htc
> > WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will
> be
> > ignored in a future release.
> > WARNING: Error inserting ath9k_common
> >
> (/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko):
> > Unknown symbol in module, or unknown parameter (see dmesg)
> > WARNING: Error inserting mac80211
> > (/lib/modules/2.6.31-21-generic/updates/cw/mac80211.ko): Unknown symbol
> in
> > module, or unknown parameter (see dmesg)
> > FATAL: Error inserting ath9k_htc
> >
> (/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko):
> > Unknown symbol in module, or unknown parameter (see dmesg)
> > And this is the dmesg output:
> > [  190.524171] usb 1-5: new high speed USB device using ehci_hcd and
> address
> > 5
> > [  190.673230] usb 1-5: configuration #1 chosen from 1 choice
> > [  190.769914] ath9k_hw: Unknown symbol ath_hw_setbssidmask
> > [  190.770410] ath9k_hw: disagrees about version of symbol
> > ath_regd_get_band_ctl
> > [  190.770422] ath9k_hw: Unknown symbol ath_regd_get_band_ctl
> > [  243.301032] ath9k_hw: Unknown symbol ath_hw_setbssidmask
> > [  243.301304] ath9k_hw: disagrees about version of symbol
> > ath_regd_get_band_ctl
> > [  243.301310] ath9k_hw: Unknown symbol ath_regd_get_band_ctl
>
> Please provide the output of:
>
> for i in ath9k_hw ath9k_common ath9k ath9k_htc ; do modprobe -l $i; done
>
> The idea is all of these should be on the same path.
>
>  Luis
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>



-- 
Yongheng Qi

Mobile: +86 1390 119 7481
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100329/ae0b15cc/attachment.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Luis R. Rodriguez]

On Sun, Mar 28, 2010 at 7:36 PM, Yongheng Qi <jetever@gmail.com> wrote:
> dear all
> I want to know the different between ath9k with ath9k_htc.

ath9k_htc is for USB devices, a different core driver was required as
the USB devices need to sleep during every read/write. We could
technically merge the two driver cores together if we implement a
threaded ISR on ath9k and then offload most work to workqueues
instead. My hope was that we could try to do this eventually in the
long run and stuff the common mac80211 helpers possible into
ath9k_common.

Right now ath9k_htc and ath9k do share the same harware code, through ath9k_hw.

  Luis

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Yongheng Qi]

Good project, Thanks very much.

I will try too.

2010/3/29 Luis R. Rodriguez <mcgrof@gmail.com>

> On Sun, Mar 28, 2010 at 7:36 PM, Yongheng Qi <jetever@gmail.com> wrote:
> > dear all
> > I want to know the different between ath9k with ath9k_htc.
>
> ath9k_htc is for USB devices, a different core driver was required as
> the USB devices need to sleep during every read/write. We could
> technically merge the two driver cores together if we implement a
> threaded ISR on ath9k and then offload most work to workqueues
> instead. My hope was that we could try to do this eventually in the
> long run and stuff the common mac80211 helpers possible into
> ath9k_common.
>
> Right now ath9k_htc and ath9k do share the same harware code, through
> ath9k_hw.
>
>  Luis
>



-- 
Yongheng Qi

Mobile: +86 1390 119 7481
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100329/3da7b128/attachment-0001.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[mistah]

This is the output:

updates/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko
updates/cw/ath9k.ko
updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko

Btw when I compiled, I run ./scripts/driver-select ath9k_htc. I didnt care
about the ath9k driver, should I have done it?


2010/3/29 Luis R. Rodriguez <mcgrof@gmail.com>

> On Sun, Mar 28, 2010 at 6:31 PM, mistah <mistahz@gmail.com> wrote:
> > The ath9k_htc has stil to be added to the README.
> > It compiles and after the make install i rebooted and tryed to plug the
> usb
> > dongle.
> > It is a TP Link TL-WN722N (it has got the same chipset of the WN721N).
> > I am under ubuntu 9.10 2.6.31-21-generic. I have another atheros card in
> > this system (it uses the ath5k module). I removed the package
> > linux-backports-modules-karmic before compiling but the module doesnt
> seem
> > to work. Am I wrong in someting?
> > This is the output I got:
> > sudo modprobe ath9k_htc
> > WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will
> be
> > ignored in a future release.
> > WARNING: Error inserting ath9k_common
> >
> (/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko):
> > Unknown symbol in module, or unknown parameter (see dmesg)
> > WARNING: Error inserting mac80211
> > (/lib/modules/2.6.31-21-generic/updates/cw/mac80211.ko): Unknown symbol
> in
> > module, or unknown parameter (see dmesg)
> > FATAL: Error inserting ath9k_htc
> >
> (/lib/modules/2.6.31-21-generic/updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko):
> > Unknown symbol in module, or unknown parameter (see dmesg)
> > And this is the dmesg output:
> > [  190.524171] usb 1-5: new high speed USB device using ehci_hcd and
> address
> > 5
> > [  190.673230] usb 1-5: configuration #1 chosen from 1 choice
> > [  190.769914] ath9k_hw: Unknown symbol ath_hw_setbssidmask
> > [  190.770410] ath9k_hw: disagrees about version of symbol
> > ath_regd_get_band_ctl
> > [  190.770422] ath9k_hw: Unknown symbol ath_regd_get_band_ctl
> > [  243.301032] ath9k_hw: Unknown symbol ath_hw_setbssidmask
> > [  243.301304] ath9k_hw: disagrees about version of symbol
> > ath_regd_get_band_ctl
> > [  243.301310] ath9k_hw: Unknown symbol ath_regd_get_band_ctl
>
> Please provide the output of:
>
> for i in ath9k_hw ath9k_common ath9k ath9k_htc ; do modprobe -l $i; done
>
> The idea is all of these should be on the same path.
>
>  Luis
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100329/d28e7501/attachment.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Luis R. Rodriguez]

On Sun, Mar 28, 2010 at 7:48 PM, mistah <mistahz@gmail.com> wrote:
> This is the output:
> updates/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
> updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko
> updates/cw/ath9k.ko

This is from the ubuntu compat-wireless, you still haven't removed it.
Just do this:

sudo rm -rf /lib/modules/$(uname -r)/updates/cw/
sudo depmod -a

> updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko

> Btw when I compiled, I run?./scripts/driver-select ath9k_htc. I didnt care
> about the ath9k driver, should I have done it?

Um, selecting ath9k_htc should compile ath9k as well for now.

  Luis

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[mistah]

I removed compat-wireless definitively then to be sure I compiled the whole
driver packet and rebooted.
Anyway now I got another problem.
This is the dmesg output after I plugged the dongle and probed the module:

[  268.909124] usb 1-5: new high speed USB device using ehci_hcd and address
5
[  269.057294] usb 1-5: configuration #1 chosen from 1 choice
[  269.062448] usb 1-5: firmware: requesting ar9271.fw
[  269.087511] usb 1-5: ath9k_htc: Firmware - ar9271.fw not found
[  269.087543] ath9k_hif_usb: probe of 1-5:1.0 failed with error -22

What's wrong with the firmware?

This is the output of  "for i in ath9k_hw ath9k_common ath9k ath9k_htc ; do
modprobe -l $i; done"
updates/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko
updates/drivers/net/wireless/ath/ath9k/ath9k.ko
updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko

They are all in the same directory.

Thank you for your time.

2010/3/29 Luis R. Rodriguez <mcgrof@gmail.com>

> On Sun, Mar 28, 2010 at 7:48 PM, mistah <mistahz@gmail.com> wrote:
> > This is the output:
> > updates/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
> > updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko
> > updates/cw/ath9k.ko
>
> This is from the ubuntu compat-wireless, you still haven't removed it.
> Just do this:
>
> sudo rm -rf /lib/modules/$(uname -r)/updates/cw/
> sudo depmod -a
>
> > updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
>
> > Btw when I compiled, I run ./scripts/driver-select ath9k_htc. I didnt
> care
> > about the ath9k driver, should I have done it?
>
> Um, selecting ath9k_htc should compile ath9k as well for now.
>
>  Luis
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100329/2f18f0af/attachment.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[mistah]

I see just now about the firmware section on the README and I found from
http://wireless.kernel.org/en/users/Drivers/ath9k_htc how to get it in here
http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git . However
I cant find the file ar9271.fw there and even if I find it, I would not know
where to put it.

2010/3/29 mistah <mistahz@gmail.com>

> I removed compat-wireless definitively then to be sure I compiled the whole
> driver packet and rebooted.
> Anyway now I got another problem.
> This is the dmesg output after I plugged the dongle and probed the module:
>
> [  268.909124] usb 1-5: new high speed USB device using ehci_hcd and
> address 5
> [  269.057294] usb 1-5: configuration #1 chosen from 1 choice
> [  269.062448] usb 1-5: firmware: requesting ar9271.fw
> [  269.087511] usb 1-5: ath9k_htc: Firmware - ar9271.fw not found
> [  269.087543] ath9k_hif_usb: probe of 1-5:1.0 failed with error -22
>
> What's wrong with the firmware?
>
> This is the output of  "for i in ath9k_hw ath9k_common ath9k ath9k_htc ; do
> modprobe -l $i; done"
> updates/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
> updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko
> updates/drivers/net/wireless/ath/ath9k/ath9k.ko
> updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
>
> They are all in the same directory.
>
> Thank you for your time.
>
> 2010/3/29 Luis R. Rodriguez <mcgrof@gmail.com>
>
>> On Sun, Mar 28, 2010 at 7:48 PM, mistah <mistahz@gmail.com> wrote:
>>
>> > This is the output:
>> > updates/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
>> > updates/drivers/net/wireless/ath/ath9k/ath9k_common.ko
>> > updates/cw/ath9k.ko
>>
>> This is from the ubuntu compat-wireless, you still haven't removed it.
>> Just do this:
>>
>> sudo rm -rf /lib/modules/$(uname -r)/updates/cw/
>> sudo depmod -a
>>
>> > updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
>>
>> > Btw when I compiled, I run ./scripts/driver-select ath9k_htc. I didnt
>> care
>> > about the ath9k driver, should I have done it?
>>
>> Um, selecting ath9k_htc should compile ath9k as well for now.
>>
>>  Luis
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100329/0610acec/attachment.htm 

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Sujith]

mistah wrote:
> I see just now about the firmware section on the README and I found from http://wireless.kernel.org/en/users/Drivers/ath9k_htc how to get it in here http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git . However I cant find the file ar9271.fw there and even if I find it, I would not know where to put it.

The firmware can be downloaded from:
http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git;a=tree

It has to be placed in /lib/firmware.
I have updated the wiki, please check it.

Sujith

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Wiktor Zajas]

Thanks so much for this driver, it's working flawlessly. Only one minor problem was "Michael MIC failure detected", changing to AES helped.
I don't know if what I've done is correct, in order to recognize my card (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to "#define AR9271_USB 0x1006", is this the right thing to do ?

On Mon, 29 Mar 2010 11:10:14 +0530
Sujith <Sujith.Manoharan@atheros.com> wrote:

> mistah wrote:
> > I see just now about the firmware section on the README and I found from http://wireless.kernel.org/en/users/Drivers/ath9k_htc how to get it in here http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git . However I cant find the file ar9271.fw there and even if I find it, I would not know where to put it.
> 
> The firmware can be downloaded from:
> http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git;a=tree
> 
> It has to be placed in /lib/firmware.
> I have updated the wiki, please check it.
> 
> Sujith
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel


-- 
Wiktor Zajas <wzajas@gmail.com>

[ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[Luis R. Rodriguez]

On Mon, Mar 29, 2010 at 12:40:09PM -0700, Wiktor Zajas wrote:
> Thanks so much for this driver, it's working flawlessly. Only one minor problem
> was "Michael MIC failure detected", changing to AES helped.

Not sure if Sujith's patch posted yesterday would fix this.

> I don't know if what I've done is correct, in order to recognize my card
> (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to
> "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to
> "#define AR9271_USB 0x1006", is this the right thing to do ?

Sort of, try this patch:

From: Luis R. Rodriguez <lrodriguez@atheros.com>
Subject: [PATCH] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID

Reported-by: Wiktor Zajas <w.zajas@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index fc4f6e8..a7664e4 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -21,6 +21,7 @@
 
 static struct usb_device_id ath9k_hif_usb_ids[] = {
 	ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
+	ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"), /* TL-WN422G v2 */
 	{ },
 };
 
-- 
1.6.3.3


********************************************************************************
                            Git Achievement Unlocked!                            

                         Apprentice Archivist (Level 3)                         
 Prepare each commit with its patch in one file per commit with git format-patch 
********************************************************************************

Re: [ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[Luis R. Rodriguez]

On Mon, Mar 29, 2010 at 12:40:09PM -0700, Wiktor Zajas wrote:
> Thanks so much for this driver, it's working flawlessly. Only one minor problem
> was "Michael MIC failure detected", changing to AES helped.

Not sure if Sujith's patch posted yesterday would fix this.

> I don't know if what I've done is correct, in order to recognize my card
> (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to
> "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to
> "#define AR9271_USB 0x1006", is this the right thing to do ?

Sort of, try this patch:

From: Luis R. Rodriguez <lrodriguez@atheros.com>
Subject: [PATCH] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID

Reported-by: Wiktor Zajas <w.zajas@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index fc4f6e8..a7664e4 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -21,6 +21,7 @@
 
 static struct usb_device_id ath9k_hif_usb_ids[] = {
 	ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
+	ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"), /* TL-WN422G v2 */
 	{ },
 };
 
-- 
1.6.3.3


********************************************************************************
                            Git Achievement Unlocked!                            

                         Apprentice Archivist (Level 3)                         
 Prepare each commit with its patch in one file per commit with git format-patch 
********************************************************************************

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Sujith]

Wiktor Zajas wrote:
> Thanks so much for this driver, it's working flawlessly. Only one minor problem was "Michael MIC failure detected", changing to AES helped.
> I don't know if what I've done is correct, in order to recognize my card (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to "#define AR9271_USB 0x1006", is this the right thing to do ?

Can you post the output of lsusb ?

Sujith

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Dyno Fu]

On Tue, Mar 30, 2010 at 11:47 AM, Sujith <Sujith.Manoharan@atheros.com> wrote:
> Wiktor Zajas wrote:
>> Thanks so much for this driver, it's working flawlessly. Only one minor problem was "Michael MIC failure detected", changing to AES helped.
>> I don't know if what I've done is correct, in order to recognize my card (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to "#define AR9271_USB 0x1006", is this the right thing to do ?
>
> Can you post the output of lsusb ?
i have the same card TL-WN422G v2. (I should "reply all", sorry Sujith).
dyno at totoro:compat-wireless-2.6$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 0cf3:1006 Atheros Communications, Inc.  -- TL-WN422G v2
Bus 001 Device 005: ID 0cf3:1002 Atheros Communications, Inc.  -- TL-WN821N
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> Sujith
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>



-- 
reality, with all its ambiguities, does the job just fine.

[ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[Wiktor Zajas]

I applied it, and I've also added this patch http://marc.info/?l=linux-wireless&m=126985782708016&w=4, but it's not enough. I still need to have #define AR9271_USB 0x1006 in hw.h.

On Mon, 29 Mar 2010 15:20:08 -0700
"Luis R. Rodriguez" <lrodriguez@atheros.com> wrote:

> On Mon, Mar 29, 2010 at 12:40:09PM -0700, Wiktor Zajas wrote:
> > Thanks so much for this driver, it's working flawlessly. Only one minor problem
> > was "Michael MIC failure detected", changing to AES helped.
> 
> Not sure if Sujith's patch posted yesterday would fix this.
> 
> > I don't know if what I've done is correct, in order to recognize my card
> > (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to
> > "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to
> > "#define AR9271_USB 0x1006", is this the right thing to do ?
> 
> Sort of, try this patch:
> 
> From: Luis R. Rodriguez <lrodriguez@atheros.com>
> Subject: [PATCH] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID
> 
> Reported-by: Wiktor Zajas <w.zajas@gmail.com>
> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
> ---
>  drivers/net/wireless/ath/ath9k/hif_usb.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
> index fc4f6e8..a7664e4 100644
> --- a/drivers/net/wireless/ath/ath9k/hif_usb.c
> +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
> @@ -21,6 +21,7 @@
>  
>  static struct usb_device_id ath9k_hif_usb_ids[] = {
>  	ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
> +	ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"), /* TL-WN422G v2 */
>  	{ },
>  };
>  
> -- 
> 1.6.3.3
> 
> 
> ********************************************************************************
>                             Git Achievement Unlocked!                            
> 
>                          Apprentice Archivist (Level 3)                         
>  Prepare each commit with its patch in one file per commit with git format-patch 
> ********************************************************************************
> 


-- 
Wiktor Zajas <wzajas@gmail.com>

[ath9k-devel] ath9k_htc compat-wireless tarballs should be up now

[Sujith]

Dyno Fu wrote:
> On Tue, Mar 30, 2010 at 11:47 AM, Sujith <Sujith.Manoharan@atheros.com> wrote:
> > Wiktor Zajas wrote:
> >> Thanks so much for this driver, it's working flawlessly. Only one minor problem was "Michael MIC failure detected", changing to AES helped.
> >> I don't know if what I've done is correct, in order to recognize my card (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to "#define AR9271_USB 0x1006", is this the right thing to do ?
> >
> > Can you post the output of lsusb ?
> i have the same card TL-WN422G v2. (I should "reply all", sorry Sujith).
> dyno at totoro:compat-wireless-2.6$ lsusb
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 006: ID 0cf3:1006 Atheros Communications, Inc.  -- TL-WN422G v2
> Bus 001 Device 005: ID 0cf3:1002 Atheros Communications, Inc.  -- TL-WN821N
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

I'll send a patch fixing this.
The current code in the driver is wrong, assuming the vendor
product ID to be the device ID.

Sujith

[ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[John W. Linville]

On Mon, Mar 29, 2010 at 03:20:08PM -0700, Luis R. Rodriguez wrote:
> On Mon, Mar 29, 2010 at 12:40:09PM -0700, Wiktor Zajas wrote:
> > Thanks so much for this driver, it's working flawlessly. Only one minor problem
> > was "Michael MIC failure detected", changing to AES helped.
> 
> Not sure if Sujith's patch posted yesterday would fix this.
> 
> > I don't know if what I've done is correct, in order to recognize my card
> > (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to
> > "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to
> > "#define AR9271_USB 0x1006", is this the right thing to do ?
> 
> Sort of, try this patch:
> 
> From: Luis R. Rodriguez <lrodriguez@atheros.com>
> Subject: [PATCH] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID
> 
> Reported-by: Wiktor Zajas <w.zajas@gmail.com>
> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
> ---
>  drivers/net/wireless/ath/ath9k/hif_usb.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
> index fc4f6e8..a7664e4 100644
> --- a/drivers/net/wireless/ath/ath9k/hif_usb.c
> +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
> @@ -21,6 +21,7 @@
>  
>  static struct usb_device_id ath9k_hif_usb_ids[] = {
>  	ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
> +	ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"), /* TL-WN422G v2 */
>  	{ },
>  };

Any feedback on this?

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.

Re: [ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[John W. Linville]

On Mon, Mar 29, 2010 at 03:20:08PM -0700, Luis R. Rodriguez wrote:
> On Mon, Mar 29, 2010 at 12:40:09PM -0700, Wiktor Zajas wrote:
> > Thanks so much for this driver, it's working flawlessly. Only one minor problem
> > was "Michael MIC failure detected", changing to AES helped.
> 
> Not sure if Sujith's patch posted yesterday would fix this.
> 
> > I don't know if what I've done is correct, in order to recognize my card
> > (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to
> > "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to
> > "#define AR9271_USB 0x1006", is this the right thing to do ?
> 
> Sort of, try this patch:
> 
> From: Luis R. Rodriguez <lrodriguez@atheros.com>
> Subject: [PATCH] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID
> 
> Reported-by: Wiktor Zajas <w.zajas@gmail.com>
> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
> ---
>  drivers/net/wireless/ath/ath9k/hif_usb.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
> index fc4f6e8..a7664e4 100644
> --- a/drivers/net/wireless/ath/ath9k/hif_usb.c
> +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
> @@ -21,6 +21,7 @@
>  
>  static struct usb_device_id ath9k_hif_usb_ids[] = {
>  	ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
> +	ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"), /* TL-WN422G v2 */
>  	{ },
>  };

Any feedback on this?

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

[ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[Luis R. Rodriguez]

On Tue, Apr 20, 2010 at 08:45:44AM -0700, John W. Linville wrote:
> On Mon, Mar 29, 2010 at 03:20:08PM -0700, Luis R. Rodriguez wrote:
> > On Mon, Mar 29, 2010 at 12:40:09PM -0700, Wiktor Zajas wrote:
> > > Thanks so much for this driver, it's working flawlessly. Only one minor problem
> > > was "Michael MIC failure detected", changing to AES helped.
> > 
> > Not sure if Sujith's patch posted yesterday would fix this.
> > 
> > > I don't know if what I've done is correct, in order to recognize my card
> > > (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to
> > > "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to
> > > "#define AR9271_USB 0x1006", is this the right thing to do ?
> > 
> > Sort of, try this patch:
> > 
> > From: Luis R. Rodriguez <lrodriguez@atheros.com>
> > Subject: [PATCH] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID
> > 
> > Reported-by: Wiktor Zajas <w.zajas@gmail.com>
> > Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
> > ---
> >  drivers/net/wireless/ath/ath9k/hif_usb.c |    1 +
> >  1 files changed, 1 insertions(+), 0 deletions(-)
> > 
> > diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
> > index fc4f6e8..a7664e4 100644
> > --- a/drivers/net/wireless/ath/ath9k/hif_usb.c
> > +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
> > @@ -21,6 +21,7 @@
> >  
> >  static struct usb_device_id ath9k_hif_usb_ids[] = {
> >  	ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
> > +	ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"), /* TL-WN422G v2 */

This patch was wrong, Sujith was going to fix it, I think he sent
some followups. If not we'll take care of it.

  Luis

Re: [ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[Luis R. Rodriguez]

On Tue, Apr 20, 2010 at 08:45:44AM -0700, John W. Linville wrote:
> On Mon, Mar 29, 2010 at 03:20:08PM -0700, Luis R. Rodriguez wrote:
> > On Mon, Mar 29, 2010 at 12:40:09PM -0700, Wiktor Zajas wrote:
> > > Thanks so much for this driver, it's working flawlessly. Only one minor problem
> > > was "Michael MIC failure detected", changing to AES helped.
> > 
> > Not sure if Sujith's patch posted yesterday would fix this.
> > 
> > > I don't know if what I've done is correct, in order to recognize my card
> > > (TL-WN422G v2) I've added "ATH9K_FW_USB_DEV(0x1006, "ar9271.fw")," to
> > > "ath9k_hif_usb_ids[]", and changed "#define AR9271_USB 0x9271" to
> > > "#define AR9271_USB 0x1006", is this the right thing to do ?
> > 
> > Sort of, try this patch:
> > 
> > From: Luis R. Rodriguez <lrodriguez@atheros.com>
> > Subject: [PATCH] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID
> > 
> > Reported-by: Wiktor Zajas <w.zajas@gmail.com>
> > Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
> > ---
> >  drivers/net/wireless/ath/ath9k/hif_usb.c |    1 +
> >  1 files changed, 1 insertions(+), 0 deletions(-)
> > 
> > diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
> > index fc4f6e8..a7664e4 100644
> > --- a/drivers/net/wireless/ath/ath9k/hif_usb.c
> > +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
> > @@ -21,6 +21,7 @@
> >  
> >  static struct usb_device_id ath9k_hif_usb_ids[] = {
> >  	ATH9K_FW_USB_DEV(0x9271, "ar9271.fw"),
> > +	ATH9K_FW_USB_DEV(0x1006, "ar9271.fw"), /* TL-WN422G v2 */

This patch was wrong, Sujith was going to fix it, I think he sent
some followups. If not we'll take care of it.

  Luis

[ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[Sujith]

John W. Linville wrote:
> Any feedback on this?

This has already been merged.

commit e92119ca88691ac2239916d31c3dcecd10867521
Author: Sujith <Sujith.Manoharan@atheros.com>
Date:   Thu Apr 1 10:28:24 2010 +0530

    ath9k_htc: Add TL-WN422G v2 product ID

    Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>


Sujith

Re: [ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[Sujith]

John W. Linville wrote:
> Any feedback on this?

This has already been merged.

commit e92119ca88691ac2239916d31c3dcecd10867521
Author: Sujith <Sujith.Manoharan@atheros.com>
Date:   Thu Apr 1 10:28:24 2010 +0530

    ath9k_htc: Add TL-WN422G v2 product ID

    Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>


Sujith

[ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[John W. Linville]

On Wed, Apr 21, 2010 at 07:38:12AM +0530, Sujith wrote:
> John W. Linville wrote:
> > Any feedback on this?
> 
> This has already been merged.
> 
> commit e92119ca88691ac2239916d31c3dcecd10867521
> Author: Sujith <Sujith.Manoharan@atheros.com>
> Date:   Thu Apr 1 10:28:24 2010 +0530
> 
>     ath9k_htc: Add TL-WN422G v2 product ID
> 
>     Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
>     Signed-off-by: John W. Linville <linville@tuxdriver.com>

:-)  OK, thanks!

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.

Re: [ath9k-devel] ath9k_htc: add the 0cf3:1006 TL-WN422G v2 device ID now

[John W. Linville]

On Wed, Apr 21, 2010 at 07:38:12AM +0530, Sujith wrote:
> John W. Linville wrote:
> > Any feedback on this?
> 
> This has already been merged.
> 
> commit e92119ca88691ac2239916d31c3dcecd10867521
> Author: Sujith <Sujith.Manoharan@atheros.com>
> Date:   Thu Apr 1 10:28:24 2010 +0530
> 
>     ath9k_htc: Add TL-WN422G v2 product ID
> 
>     Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
>     Signed-off-by: John W. Linville <linville@tuxdriver.com>

:-)  OK, thanks!

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.