From: Alan Cox <alan@linux.intel.com>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 14/14] synclink: reworking locking a bit
Date: Thu, 01 Apr 2010 17:07:18 +0100 [thread overview]
Message-ID: <20100401160708.8882.46631.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100401155513.8882.54006.stgit@localhost.localdomain>
Use the port mutex and port lock to fix the various races. The locking
still isn't totally consistent but its better than before. Wants switching
to the port helpers.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/char/synclink_gt.c | 12 +++++++++++-
drivers/char/synclinkmp.c | 9 ++++++++-
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index d0f81f5..c56b70a 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -675,12 +675,14 @@ static int open(struct tty_struct *tty, struct file *filp)
goto cleanup;
}
+ mutex_lock(&info->port.mutex);
info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
retval = -EBUSY;
spin_unlock_irqrestore(&info->netlock, flags);
+ mutex_unlock(&info->port.mutex);
goto cleanup;
}
info->port.count++;
@@ -692,7 +694,7 @@ static int open(struct tty_struct *tty, struct file *filp)
if (retval < 0)
goto cleanup;
}
-
+ mutex_unlock(&info->port.mutex);
retval = block_til_ready(tty, filp, info);
if (retval) {
DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
@@ -724,12 +726,14 @@ static void close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
@@ -740,17 +744,23 @@ cleanup:
static void hangup(struct tty_struct *tty)
{
struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
if (sanity_check(info, tty->name, "hangup"))
return;
DBGINFO(("%s hangup\n", info->device_name));
flush_buffer(tty);
+
+ mutex_lock(&info->port.mutex);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 8da976b..cfa581e 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -812,13 +812,15 @@ static void close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
-
+
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
@@ -834,6 +836,7 @@ cleanup:
static void hangup(struct tty_struct *tty)
{
SLMP_INFO *info = tty->driver_data;
+ unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s hangup()\n",
@@ -842,12 +845,16 @@ static void hangup(struct tty_struct *tty)
if (sanity_check(info, tty->name, "hangup"))
return;
+ mutex_lock(&info->port.mutex);
flush_buffer(tty);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
prev parent reply other threads:[~2010-04-01 16:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-01 16:04 [RFC PATCH 00/14] Some BKL killing in the serial drivers Alan Cox
2010-04-01 16:04 ` [PATCH 01/14] tty: serial - fix tty referencing in set_ldisc Alan Cox
2010-04-01 16:04 ` [PATCH 02/14] tty: serial - fix tty back references in termios Alan Cox
2010-04-01 16:04 ` [PATCH 03/14] tty: serial - fix various misuses/mishandlings of port->tty Alan Cox
2010-04-01 16:04 ` [PATCH 04/14] vc: Locking clean up Alan Cox
2010-04-30 20:30 ` Arnd Bergmann
2010-04-01 16:05 ` [PATCH 05/14] stallion: prune lock_kernel calls Alan Cox
2010-04-29 21:29 ` Arnd Bergmann
2010-04-30 19:32 ` Alan Cox
2010-04-01 16:05 ` [PATCH 06/14] istallion: use bit ops for the board flags Alan Cox
2010-04-01 16:05 ` [PATCH 07/14] riscom8: kill use of lock_kernel Alan Cox
2010-04-01 16:05 ` [PATCH 08/14] isicom: kill off the BKL Alan Cox
2010-04-01 16:06 ` [PATCH 09/14] rocket: kill BKL Alan Cox
2010-04-01 16:06 ` [PATCH 10/14] synclink: kill the big kernel lock Alan Cox
2010-04-01 16:06 ` [PATCH 11/14] cyclades: Kill off BKL usage Alan Cox
2010-04-01 16:06 ` [PATCH 12/14] epca: Kill the big kernel lock Alan Cox
2010-04-01 16:07 ` [PATCH 13/14] specialix; Kill the BKL Alan Cox
2010-04-01 16:07 ` Alan Cox [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100401160708.8882.46631.stgit@localhost.localdomain \
--to=alan@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.