* 2.6.34-rc1 on zaurus: does it boot for you? @ 2010-03-13 12:27 ` Pavel Machek 0 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-03-13 12:27 UTC (permalink / raw) To: linux-arm-kernel Hi! I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not seem to even reset the framebuffer (I'm using kexec -- so it stays stuck on on previous screen). Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* 2.6.34-rc1 on zaurus: does it boot for you? @ 2010-03-13 12:27 ` Pavel Machek 0 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-03-13 12:27 UTC (permalink / raw) To: rpurdie, lenz, kernel list, arminlitzel, Cyril Hrubis, thommycheck, linux-arm-kernel, dbaryshkov, omegamoon, eric.y.miao, utx, zaurus-devel Hi! I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not seem to even reset the framebuffer (I'm using kexec -- so it stays stuck on on previous screen). Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <20100315102830.GA10288@atrey.karlin.mff.cuni.cz>]
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots [not found] ` <20100315102830.GA10288@atrey.karlin.mff.cuni.cz> @ 2010-04-01 6:06 ` Pavel Machek 0 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-04-01 6:06 UTC (permalink / raw) To: linux-arm-kernel Hi! > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > stuck on on previous screen). Tried again with -rc2 and -rc3, and neither boots :-(. I did not have time to set up serial console, yet :-(. Any ideas? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots @ 2010-04-01 6:06 ` Pavel Machek 0 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-04-01 6:06 UTC (permalink / raw) To: Cyril Hrubis, rpurdie, lenz, kernel list, arminlitzel, thommycheck, linux-arm-kernel, dbaryshkov, omegamoon, eric.y.miao, utx, zaurus-devel, Rafael J. Wysocki Hi! > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > stuck on on previous screen). Tried again with -rc2 and -rc3, and neither boots :-(. I did not have time to set up serial console, yet :-(. Any ideas? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots 2010-04-01 6:06 ` Pavel Machek @ 2010-04-07 20:26 ` Maciej Rutecki -1 siblings, 0 replies; 16+ messages in thread From: Maciej Rutecki @ 2010-04-07 20:26 UTC (permalink / raw) To: linux-arm-kernel On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: > Hi! > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > > stuck on on previous screen). > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > time to set up serial console, yet :-(. Any ideas? > Pavel > I created a Bugzilla entry at https://bugzilla.kernel.org/show_bug.cgi?id=15712 for your bug report, please add your address to the CC list in there, thanks! -- Maciej Rutecki http://www.maciek.unixy.pl ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots @ 2010-04-07 20:26 ` Maciej Rutecki 0 siblings, 0 replies; 16+ messages in thread From: Maciej Rutecki @ 2010-04-07 20:26 UTC (permalink / raw) To: Pavel Machek Cc: Cyril Hrubis, rpurdie, lenz, kernel list, arminlitzel, thommycheck, linux-arm-kernel, dbaryshkov, omegamoon, eric.y.miao, utx, zaurus-devel, Rafael J. Wysocki On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: > Hi! > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > > stuck on on previous screen). > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > time to set up serial console, yet :-(. Any ideas? > Pavel > I created a Bugzilla entry at https://bugzilla.kernel.org/show_bug.cgi?id=15712 for your bug report, please add your address to the CC list in there, thanks! -- Maciej Rutecki http://www.maciek.unixy.pl ^ permalink raw reply [flat|nested] 16+ messages in thread
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots 2010-04-07 20:26 ` Maciej Rutecki @ 2010-04-07 20:52 ` Marek Vasut -1 siblings, 0 replies; 16+ messages in thread From: Marek Vasut @ 2010-04-07 20:52 UTC (permalink / raw) To: linux-arm-kernel Dne St 7. dubna 2010 22:26:34 Maciej Rutecki napsal(a): > On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: > > Hi! > > > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > > > stuck on on previous screen). > > > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > > time to set up serial console, yet :-(. Any ideas? > > Pavel > > I created a Bugzilla entry at > https://bugzilla.kernel.org/show_bug.cgi?id=15712 > for your bug report, please add your address to the CC list in there, > thanks! > Pavel, you broke it ... and here you say something about sane arm maintainers ;-) ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots @ 2010-04-07 20:52 ` Marek Vasut 0 siblings, 0 replies; 16+ messages in thread From: Marek Vasut @ 2010-04-07 20:52 UTC (permalink / raw) To: linux-arm-kernel, maciej.rutecki Cc: Pavel Machek, Rafael J. Wysocki, thommycheck, dbaryshkov, Cyril Hrubis, arminlitzel, kernel list, utx, lenz, rpurdie, omegamoon, eric.y.miao, zaurus-devel Dne St 7. dubna 2010 22:26:34 Maciej Rutecki napsal(a): > On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: > > Hi! > > > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > > > stuck on on previous screen). > > > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > > time to set up serial console, yet :-(. Any ideas? > > Pavel > > I created a Bugzilla entry at > https://bugzilla.kernel.org/show_bug.cgi?id=15712 > for your bug report, please add your address to the CC list in there, > thanks! > Pavel, you broke it ... and here you say something about sane arm maintainers ;-) ^ permalink raw reply [flat|nested] 16+ messages in thread
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots 2010-04-07 20:52 ` Marek Vasut @ 2010-04-08 4:44 ` Pavel Machek -1 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-04-08 4:44 UTC (permalink / raw) To: linux-arm-kernel On Wed 2010-04-07 22:52:08, Marek Vasut wrote: > Dne St 7. dubna 2010 22:26:34 Maciej Rutecki napsal(a): > > On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: > > > Hi! > > > > > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > > > > stuck on on previous screen). > > > > > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > > > time to set up serial console, yet :-(. Any ideas? > > > > I created a Bugzilla entry at > > https://bugzilla.kernel.org/show_bug.cgi?id=15712 > > for your bug report, please add your address to the CC list in there, > > thanks! > > > Pavel, you broke it ... and here you say something about sane arm maintainers > ;-) ? You know which patch causes it ? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots @ 2010-04-08 4:44 ` Pavel Machek 0 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-04-08 4:44 UTC (permalink / raw) To: Marek Vasut Cc: linux-arm-kernel, maciej.rutecki, Rafael J. Wysocki, thommycheck, dbaryshkov, Cyril Hrubis, arminlitzel, kernel list, utx, lenz, rpurdie, omegamoon, eric.y.miao, zaurus-devel On Wed 2010-04-07 22:52:08, Marek Vasut wrote: > Dne St 7. dubna 2010 22:26:34 Maciej Rutecki napsal(a): > > On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: > > > Hi! > > > > > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > > > > stuck on on previous screen). > > > > > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > > > time to set up serial console, yet :-(. Any ideas? > > > > I created a Bugzilla entry at > > https://bugzilla.kernel.org/show_bug.cgi?id=15712 > > for your bug report, please add your address to the CC list in there, > > thanks! > > > Pavel, you broke it ... and here you say something about sane arm maintainers > ;-) ? You know which patch causes it ? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots 2010-04-08 4:44 ` Pavel Machek @ 2010-04-08 10:53 ` Eric Miao -1 siblings, 0 replies; 16+ messages in thread From: Eric Miao @ 2010-04-08 10:53 UTC (permalink / raw) To: linux-arm-kernel On Thu, Apr 8, 2010 at 12:44 PM, Pavel Machek <pavel@ucw.cz> wrote: > On Wed 2010-04-07 22:52:08, Marek Vasut wrote: >> Dne St 7. dubna 2010 22:26:34 Maciej Rutecki napsal(a): >> > On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: >> > > Hi! >> > > >> > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not >> > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays >> > > > > stuck on on previous screen). >> > > >> > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have >> > > time to set up serial console, yet :-(. Any ideas? >> > >> > I created a Bugzilla entry at >> > https://bugzilla.kernel.org/show_bug.cgi?id=15712 >> > for your bug report, please add your address to the CC list in there, >> > ?thanks! >> > >> Pavel, you broke it ... and here you say something about sane arm maintainers >> ;-) > > ? You know which patch causes it ? Just have some time to try this out on my corgi, and the kernel runs happily. Pavel, Which exact model are you running your kernel? ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots @ 2010-04-08 10:53 ` Eric Miao 0 siblings, 0 replies; 16+ messages in thread From: Eric Miao @ 2010-04-08 10:53 UTC (permalink / raw) To: Pavel Machek Cc: Marek Vasut, linux-arm-kernel, maciej.rutecki, Rafael J. Wysocki, thommycheck, dbaryshkov, Cyril Hrubis, arminlitzel, kernel list, utx, lenz, rpurdie, omegamoon, zaurus-devel On Thu, Apr 8, 2010 at 12:44 PM, Pavel Machek <pavel@ucw.cz> wrote: > On Wed 2010-04-07 22:52:08, Marek Vasut wrote: >> Dne St 7. dubna 2010 22:26:34 Maciej Rutecki napsal(a): >> > On czwartek, 1 kwietnia 2010 o 08:06:25 Pavel Machek wrote: >> > > Hi! >> > > >> > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not >> > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays >> > > > > stuck on on previous screen). >> > > >> > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have >> > > time to set up serial console, yet :-(. Any ideas? >> > >> > I created a Bugzilla entry at >> > https://bugzilla.kernel.org/show_bug.cgi?id=15712 >> > for your bug report, please add your address to the CC list in there, >> > thanks! >> > >> Pavel, you broke it ... and here you say something about sane arm maintainers >> ;-) > > ? You know which patch causes it ? Just have some time to try this out on my corgi, and the kernel runs happily. Pavel, Which exact model are you running your kernel? ^ permalink raw reply [flat|nested] 16+ messages in thread
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots 2010-04-08 10:53 ` Eric Miao @ 2010-04-08 11:05 ` Pavel Machek -1 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-04-08 11:05 UTC (permalink / raw) To: linux-arm-kernel > >> > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > >> > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > >> > > > > stuck on on previous screen). > >> > > > >> > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > >> > > time to set up serial console, yet :-(. Any ideas? > >> > > >> > I created a Bugzilla entry at > >> > https://bugzilla.kernel.org/show_bug.cgi?id=15712 > >> > for your bug report, please add your address to the CC list in there, > >> > ?thanks! > >> > > >> Pavel, you broke it ... and here you say something about sane arm maintainers > >> ;-) > > > > ? You know which patch causes it ? > > Just have some time to try this out on my corgi, and the kernel runs > happily. > > Pavel, > > Which exact model are you running your kernel? It is Zaurus SL-C3000 (aka spitz). I'm using kexec, but that used to work. Should I try minimal config? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots @ 2010-04-08 11:05 ` Pavel Machek 0 siblings, 0 replies; 16+ messages in thread From: Pavel Machek @ 2010-04-08 11:05 UTC (permalink / raw) To: Eric Miao Cc: Marek Vasut, linux-arm-kernel, maciej.rutecki, Rafael J. Wysocki, thommycheck, dbaryshkov, Cyril Hrubis, arminlitzel, kernel list, utx, lenz, rpurdie, omegamoon, zaurus-devel > >> > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > >> > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > >> > > > > stuck on on previous screen). > >> > > > >> > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > >> > > time to set up serial console, yet :-(. Any ideas? > >> > > >> > I created a Bugzilla entry at > >> > https://bugzilla.kernel.org/show_bug.cgi?id=15712 > >> > for your bug report, please add your address to the CC list in there, > >> > thanks! > >> > > >> Pavel, you broke it ... and here you say something about sane arm maintainers > >> ;-) > > > > ? You know which patch causes it ? > > Just have some time to try this out on my corgi, and the kernel runs > happily. > > Pavel, > > Which exact model are you running your kernel? It is Zaurus SL-C3000 (aka spitz). I'm using kexec, but that used to work. Should I try minimal config? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots 2010-04-08 11:05 ` Pavel Machek @ 2010-04-08 12:06 ` Eric Miao -1 siblings, 0 replies; 16+ messages in thread From: Eric Miao @ 2010-04-08 12:06 UTC (permalink / raw) To: linux-arm-kernel 2010/4/8 Pavel Machek <pavel@ucw.cz>: > >> >> > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not >> >> > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays >> >> > > > > stuck on on previous screen). >> >> > > >> >> > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have >> >> > > time to set up serial console, yet :-(. Any ideas? >> >> > >> >> > I created a Bugzilla entry at >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=15712 >> >> > for your bug report, please add your address to the CC list in there, >> >> > ?thanks! >> >> > >> >> Pavel, you broke it ... and here you say something about sane arm maintainers >> >> ;-) >> > >> > ? You know which patch causes it ? >> >> Just have some time to try this out on my corgi, and the kernel runs >> happily. >> >> Pavel, >> >> Which exact model are you running your kernel? > > It is Zaurus SL-C3000 (aka spitz). I'm using kexec, but that used to > work. Should I try minimal config? I'm using kexec as well, but on corgi. My akita is not on hands these days, otherwise I can give it a try. I guess there is nothing fundamentally wrong, so yes, I think it's feasible to try minimal config. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots @ 2010-04-08 12:06 ` Eric Miao 0 siblings, 0 replies; 16+ messages in thread From: Eric Miao @ 2010-04-08 12:06 UTC (permalink / raw) To: Pavel Machek Cc: Marek Vasut, linux-arm-kernel, maciej.rutecki, Rafael J. Wysocki, thommycheck, dbaryshkov, Cyril Hrubis, arminlitzel, kernel list, utx, lenz, rpurdie, omegamoon, zaurus-devel 2010/4/8 Pavel Machek <pavel@ucw.cz>: > >> >> > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not >> >> > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays >> >> > > > > stuck on on previous screen). >> >> > > >> >> > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have >> >> > > time to set up serial console, yet :-(. Any ideas? >> >> > >> >> > I created a Bugzilla entry at >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=15712 >> >> > for your bug report, please add your address to the CC list in there, >> >> > thanks! >> >> > >> >> Pavel, you broke it ... and here you say something about sane arm maintainers >> >> ;-) >> > >> > ? You know which patch causes it ? >> >> Just have some time to try this out on my corgi, and the kernel runs >> happily. >> >> Pavel, >> >> Which exact model are you running your kernel? > > It is Zaurus SL-C3000 (aka spitz). I'm using kexec, but that used to > work. Should I try minimal config? I'm using kexec as well, but on corgi. My akita is not on hands these days, otherwise I can give it a try. I guess there is nothing fundamentally wrong, so yes, I think it's feasible to try minimal config. ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2010-04-08 12:07 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-13 12:27 2.6.34-rc1 on zaurus: does it boot for you? Pavel Machek
2010-03-13 12:27 ` Pavel Machek
[not found] ` <20100315102830.GA10288@atrey.karlin.mff.cuni.cz>
2010-04-01 6:06 ` [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots Pavel Machek
2010-04-01 6:06 ` Pavel Machek
2010-04-07 20:26 ` Maciej Rutecki
2010-04-07 20:26 ` Maciej Rutecki
2010-04-07 20:52 ` Marek Vasut
2010-04-07 20:52 ` Marek Vasut
2010-04-08 4:44 ` Pavel Machek
2010-04-08 4:44 ` Pavel Machek
2010-04-08 10:53 ` Eric Miao
2010-04-08 10:53 ` Eric Miao
2010-04-08 11:05 ` Pavel Machek
2010-04-08 11:05 ` Pavel Machek
2010-04-08 12:06 ` Eric Miao
2010-04-08 12:06 ` Eric Miao
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.