From: daniel@caiaq.de (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv6 2.6.34-rc5 2/5] mx5: Add USB device definitions for Freescale MX51 Babbage HW
Date: Wed, 21 Apr 2010 02:23:07 +0200 [thread overview]
Message-ID: <20100421002307.GN30801@buzzloop.caiaq.de> (raw)
In-Reply-To: <1271805567-23068-2-git-send-email-Dinh.Nguyen@freescale.com>
Hi Dinh,
On Tue, Apr 20, 2010 at 06:19:24PM -0500, Dinh.Nguyen at freescale.com wrote:
> This patch is part of enabling USB for Freescale MX51 Babbage HW. This
> patch adds device structures for USB Host1 and OTG port, and adds
> clocking information for USB HW.
>
> This patch applies to 2.6.34-rc5.
Hmm, this one still doesn't apply for me. Can you double-check with a
fresh checkout of 2.6.34-rc5 please?
Other than that, I'm ok with the patches now. Sascha, do you have more
objections? I couldn't test the whole thing as I lack mx5 hardware, but
it looks sane now, and it doesn't break anything for mx3.
> Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
For the patches 3/5 and 4/5 of this series, you can have my
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Thanks,
Daniel
> ---
> arch/arm/mach-mx5/clock-mx51.c | 8 ++++++
> arch/arm/mach-mx5/devices.c | 49 ++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-mx5/devices.h | 2 +
> 3 files changed, 59 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
> index 8f85f73..dcca330 100644
> --- a/arch/arm/mach-mx5/clock-mx51.c
> +++ b/arch/arm/mach-mx5/clock-mx51.c
> @@ -761,6 +761,10 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
> DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
> NULL, NULL, &ipg_clk, NULL);
>
> +/* USB */
> +DEFINE_CLOCK(usboh3_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG14_OFFSET,
> + NULL, NULL, &pll3_sw_clk, NULL);
> +
> /* FEC */
> DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
> NULL, NULL, &ipg_clk, NULL);
> @@ -778,6 +782,10 @@ static struct clk_lookup lookups[] = {
> _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
> _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
> _REGISTER_CLOCK("fec.0", NULL, fec_clk)
> + _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
> + _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
> + _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
> + _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
> };
>
> static void clk_tree_init(void)
> diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
> index 5070ae1..e6262f3 100644
> --- a/arch/arm/mach-mx5/devices.c
> +++ b/arch/arm/mach-mx5/devices.c
> @@ -11,6 +11,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> #include <linux/gpio.h>
> #include <mach/hardware.h>
> #include <mach/imx-uart.h>
> @@ -92,6 +93,54 @@ struct platform_device mxc_fec_device = {
> .resource = mxc_fec_resources,
> };
>
> +static u64 usb_dma_mask = DMA_BIT_MASK(32);
> +
> +static struct resource usbotg_resources[] = {
> + {
> + .start = MX51_OTG_BASE_ADDR,
> + .end = MX51_OTG_BASE_ADDR + 0x1ff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_USB_OTG,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device mxc_usbdr_host_device = {
> + .name = "mxc-ehci",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(usbotg_resources),
> + .resource = usbotg_resources,
> + .dev = {
> + .dma_mask = &usb_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> +static struct resource usbh1_resources[] = {
> + {
> + .start = MX51_OTG_BASE_ADDR + 0x200,
> + .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_USB_H1,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device mxc_usbh1_device = {
> + .name = "mxc-ehci",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(usbh1_resources),
> + .resource = usbh1_resources,
> + .dev = {
> + .dma_mask = &usb_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> static struct mxc_gpio_port mxc_gpio_ports[] = {
> {
> .chip.label = "gpio-0",
> diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
> index f339ab8..95c45f9 100644
> --- a/arch/arm/mach-mx5/devices.h
> +++ b/arch/arm/mach-mx5/devices.h
> @@ -2,3 +2,5 @@ extern struct platform_device mxc_uart_device0;
> extern struct platform_device mxc_uart_device1;
> extern struct platform_device mxc_uart_device2;
> extern struct platform_device mxc_fec_device;
> +extern struct platform_device mxc_usbdr_host_device;
> +extern struct platform_device mxc_usbh1_device;
> --
> 1.6.0.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Mack <daniel@caiaq.de>
To: Dinh.Nguyen@freescale.com
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux@arm.linux.org.uk,
s.hauer@pengutronix.de, valentin.longchamp@epfl.ch,
grant.likely@secretlab.ca, bryan.wu@canonical.com,
amit.kucheria@canonical.com, Jun.Li@freescale.com,
xiao-lizhang@freescale.com
Subject: Re: [PATCHv6 2.6.34-rc5 2/5] mx5: Add USB device definitions for Freescale MX51 Babbage HW
Date: Wed, 21 Apr 2010 02:23:07 +0200 [thread overview]
Message-ID: <20100421002307.GN30801@buzzloop.caiaq.de> (raw)
In-Reply-To: <1271805567-23068-2-git-send-email-Dinh.Nguyen@freescale.com>
Hi Dinh,
On Tue, Apr 20, 2010 at 06:19:24PM -0500, Dinh.Nguyen@freescale.com wrote:
> This patch is part of enabling USB for Freescale MX51 Babbage HW. This
> patch adds device structures for USB Host1 and OTG port, and adds
> clocking information for USB HW.
>
> This patch applies to 2.6.34-rc5.
Hmm, this one still doesn't apply for me. Can you double-check with a
fresh checkout of 2.6.34-rc5 please?
Other than that, I'm ok with the patches now. Sascha, do you have more
objections? I couldn't test the whole thing as I lack mx5 hardware, but
it looks sane now, and it doesn't break anything for mx3.
> Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
For the patches 3/5 and 4/5 of this series, you can have my
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Thanks,
Daniel
> ---
> arch/arm/mach-mx5/clock-mx51.c | 8 ++++++
> arch/arm/mach-mx5/devices.c | 49 ++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-mx5/devices.h | 2 +
> 3 files changed, 59 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
> index 8f85f73..dcca330 100644
> --- a/arch/arm/mach-mx5/clock-mx51.c
> +++ b/arch/arm/mach-mx5/clock-mx51.c
> @@ -761,6 +761,10 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
> DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
> NULL, NULL, &ipg_clk, NULL);
>
> +/* USB */
> +DEFINE_CLOCK(usboh3_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG14_OFFSET,
> + NULL, NULL, &pll3_sw_clk, NULL);
> +
> /* FEC */
> DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
> NULL, NULL, &ipg_clk, NULL);
> @@ -778,6 +782,10 @@ static struct clk_lookup lookups[] = {
> _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
> _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
> _REGISTER_CLOCK("fec.0", NULL, fec_clk)
> + _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
> + _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
> + _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
> + _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
> };
>
> static void clk_tree_init(void)
> diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
> index 5070ae1..e6262f3 100644
> --- a/arch/arm/mach-mx5/devices.c
> +++ b/arch/arm/mach-mx5/devices.c
> @@ -11,6 +11,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> #include <linux/gpio.h>
> #include <mach/hardware.h>
> #include <mach/imx-uart.h>
> @@ -92,6 +93,54 @@ struct platform_device mxc_fec_device = {
> .resource = mxc_fec_resources,
> };
>
> +static u64 usb_dma_mask = DMA_BIT_MASK(32);
> +
> +static struct resource usbotg_resources[] = {
> + {
> + .start = MX51_OTG_BASE_ADDR,
> + .end = MX51_OTG_BASE_ADDR + 0x1ff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_USB_OTG,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device mxc_usbdr_host_device = {
> + .name = "mxc-ehci",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(usbotg_resources),
> + .resource = usbotg_resources,
> + .dev = {
> + .dma_mask = &usb_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> +static struct resource usbh1_resources[] = {
> + {
> + .start = MX51_OTG_BASE_ADDR + 0x200,
> + .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_USB_H1,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device mxc_usbh1_device = {
> + .name = "mxc-ehci",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(usbh1_resources),
> + .resource = usbh1_resources,
> + .dev = {
> + .dma_mask = &usb_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> static struct mxc_gpio_port mxc_gpio_ports[] = {
> {
> .chip.label = "gpio-0",
> diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
> index f339ab8..95c45f9 100644
> --- a/arch/arm/mach-mx5/devices.h
> +++ b/arch/arm/mach-mx5/devices.h
> @@ -2,3 +2,5 @@ extern struct platform_device mxc_uart_device0;
> extern struct platform_device mxc_uart_device1;
> extern struct platform_device mxc_uart_device2;
> extern struct platform_device mxc_fec_device;
> +extern struct platform_device mxc_usbdr_host_device;
> +extern struct platform_device mxc_usbh1_device;
> --
> 1.6.0.4
>
next prev parent reply other threads:[~2010-04-21 0:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-20 23:19 [PATCHv6 2.6.34-rc5 1/5] mxc: Update GPIO for USB support on Freescale MX51 Babbage HW Dinh.Nguyen at freescale.com
2010-04-20 23:19 ` Dinh.Nguyen
2010-04-20 23:19 ` [PATCHv6 2.6.34-rc5 2/5] mx5: Add USB device definitions for " Dinh.Nguyen at freescale.com
2010-04-20 23:19 ` Dinh.Nguyen
2010-04-20 23:19 ` [PATCHv6 2.6.34-rc5 3/5] mx5: Enable board specific functions for enabling USB host on Babbage Dinh.Nguyen at freescale.com
2010-04-20 23:19 ` Dinh.Nguyen
2010-04-20 23:19 ` [PATCHv6 2.6.34-rc5 4/5] mxc: Add generic USB HW initialization for MX51 Dinh.Nguyen at freescale.com
2010-04-20 23:19 ` Dinh.Nguyen
2010-04-20 23:19 ` [PATCHv6 2.6.34-rc5 5/5] mx5: Add USB to Freescale MX51 defconfig Dinh.Nguyen at freescale.com
2010-04-20 23:19 ` Dinh.Nguyen
2010-04-21 1:08 ` [PATCHv6 2.6.34-rc5 4/5] mxc: Add generic USB HW initialization for MX51 Daniel Mack
2010-04-21 1:08 ` Daniel Mack
2010-04-21 0:23 ` Daniel Mack [this message]
2010-04-21 0:23 ` [PATCHv6 2.6.34-rc5 2/5] mx5: Add USB device definitions for Freescale MX51 Babbage HW Daniel Mack
2010-04-21 15:10 ` Nguyen Dinh-R00091
2010-04-21 15:10 ` Nguyen Dinh-R00091
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100421002307.GN30801@buzzloop.caiaq.de \
--to=daniel@caiaq.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.