* [PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions
@ 2010-05-17 0:39 ` Kukjin Kim
0 siblings, 0 replies; 4+ messages in thread
From: Kukjin Kim @ 2010-05-17 0:39 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Thomas Abraham, Kukjin Kim
From: Thomas Abraham <thomas.ab@samsung.com>
The non-glitch-free clock muxes can suffer from glitches when changing
clock sources. It is recommended to disable the output of non-glitch-
free muxes before trying to change the clock source. After clock change
is complete, the non-glitch-free clock can be re-enabled.
These clocks are added to the list of clocks to be enabled at boot time.
Device drivers that need to disable the non-glitch-free mux output clock
can 'clk_get' these clocks, disable them, change the clock selection
of the mux and then re-enable the non-glitch-free mux output.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s5pv210/clock.c | 140 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 140 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 154bca4..a2c3ab5 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -183,6 +183,11 @@ static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
}
+static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
+}
+
static struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.id = -1,
@@ -448,6 +453,141 @@ static struct clk init_clocks[] = {
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<10),
+ }, {
+ .name = "mout_hdmi",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "mout_mixer",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "mout_dac",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mout_cam",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "mout_cam",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "mout_fimd",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "mout_csis",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mout_finvpll",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "mout_mmc",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "mout_mmc",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "mout_mmc",
+ .id = 2,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "mout_mmc",
+ .id = 3,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "mout_uart",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "mout_uart",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "mout_uart",
+ .id = 2,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "mout_uart",
+ .id = 3,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "mout_spi",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "mout_spi",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "mout_pwm",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
+ .name = "mout_audio",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "mout_audio",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "mout_audio",
+ .id = 2,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 26),
+ }, {
+ .name = "mout_spdif",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "mout_pwi",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 29),
+ }, {
+ .name = "mout_fimc",
+ .id = 0,
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mout_fimc",
+ .id = 1,
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "mout_fimc",
+ .id = 2,
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 4),
},
};
--
1.6.2.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions
@ 2010-05-17 0:39 ` Kukjin Kim
0 siblings, 0 replies; 4+ messages in thread
From: Kukjin Kim @ 2010-05-17 0:39 UTC (permalink / raw)
To: linux-arm-kernel
From: Thomas Abraham <thomas.ab@samsung.com>
The non-glitch-free clock muxes can suffer from glitches when changing
clock sources. It is recommended to disable the output of non-glitch-
free muxes before trying to change the clock source. After clock change
is complete, the non-glitch-free clock can be re-enabled.
These clocks are added to the list of clocks to be enabled at boot time.
Device drivers that need to disable the non-glitch-free mux output clock
can 'clk_get' these clocks, disable them, change the clock selection
of the mux and then re-enable the non-glitch-free mux output.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s5pv210/clock.c | 140 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 140 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 154bca4..a2c3ab5 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -183,6 +183,11 @@ static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
}
+static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
+}
+
static struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.id = -1,
@@ -448,6 +453,141 @@ static struct clk init_clocks[] = {
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<10),
+ }, {
+ .name = "mout_hdmi",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "mout_mixer",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "mout_dac",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mout_cam",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "mout_cam",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "mout_fimd",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "mout_csis",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mout_finvpll",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "mout_mmc",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "mout_mmc",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "mout_mmc",
+ .id = 2,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "mout_mmc",
+ .id = 3,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "mout_uart",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "mout_uart",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "mout_uart",
+ .id = 2,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "mout_uart",
+ .id = 3,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "mout_spi",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "mout_spi",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "mout_pwm",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
+ .name = "mout_audio",
+ .id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "mout_audio",
+ .id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "mout_audio",
+ .id = 2,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 26),
+ }, {
+ .name = "mout_spdif",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "mout_pwi",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 29),
+ }, {
+ .name = "mout_fimc",
+ .id = 0,
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mout_fimc",
+ .id = 1,
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "mout_fimc",
+ .id = 2,
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 4),
},
};
--
1.6.2.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions
2010-05-17 0:39 ` Kukjin Kim
@ 2010-05-17 1:09 ` Ben Dooks
-1 siblings, 0 replies; 4+ messages in thread
From: Ben Dooks @ 2010-05-17 1:09 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, Thomas Abraham, ben-linux
On Mon, May 17, 2010 at 09:39:05AM +0900, Kukjin Kim wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> The non-glitch-free clock muxes can suffer from glitches when changing
> clock sources. It is recommended to disable the output of non-glitch-
> free muxes before trying to change the clock source. After clock change
> is complete, the non-glitch-free clock can be re-enabled.
>
> These clocks are added to the list of clocks to be enabled at boot time.
> Device drivers that need to disable the non-glitch-free mux output clock
> can 'clk_get' these clocks, disable them, change the clock selection
> of the mux and then re-enable the non-glitch-free mux output.
Hmm, this is something we may have to get into the clock layer itself
and keep away from the drivers involved. Can these clocks be hard connected
to their sources?
At least putting some form of comment in with the clock addition to note
that there is this problem would be useful.
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
> arch/arm/mach-s5pv210/clock.c | 140 +++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 140 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
> index 154bca4..a2c3ab5 100644
> --- a/arch/arm/mach-s5pv210/clock.c
> +++ b/arch/arm/mach-s5pv210/clock.c
> @@ -183,6 +183,11 @@ static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
> return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
> }
>
> +static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
> +}
> +
> static struct clk clk_sclk_hdmi27m = {
> .name = "sclk_hdmi27m",
> .id = -1,
> @@ -448,6 +453,141 @@ static struct clk init_clocks[] = {
> .parent = &clk_pclk_psys.clk,
> .enable = s5pv210_clk_ip3_ctrl,
> .ctrlbit = (1<<10),
> + }, {
> + .name = "mout_hdmi",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "mout_mixer",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "mout_dac",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "mout_cam",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "mout_cam",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "mout_fimd",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "mout_csis",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "mout_finvpll",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "mout_mmc",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 8),
> + }, {
> + .name = "mout_mmc",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 9),
> + }, {
> + .name = "mout_mmc",
> + .id = 2,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 10),
> + }, {
> + .name = "mout_mmc",
> + .id = 3,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 11),
> + }, {
> + .name = "mout_uart",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 12),
> + }, {
> + .name = "mout_uart",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 13),
> + }, {
> + .name = "mout_uart",
> + .id = 2,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 14),
> + }, {
> + .name = "mout_uart",
> + .id = 3,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 15),
> + }, {
> + .name = "mout_spi",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 16),
> + }, {
> + .name = "mout_spi",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 17),
> + }, {
> + .name = "mout_pwm",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 19),
> + }, {
> + .name = "mout_audio",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 24),
> + }, {
> + .name = "mout_audio",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 25),
> + }, {
> + .name = "mout_audio",
> + .id = 2,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 26),
> + }, {
> + .name = "mout_spdif",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 27),
> + }, {
> + .name = "mout_pwi",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 29),
> + }, {
> + .name = "mout_fimc",
> + .id = 0,
> + .enable = s5pv210_clk_mask1_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "mout_fimc",
> + .id = 1,
> + .enable = s5pv210_clk_mask1_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "mout_fimc",
> + .id = 2,
> + .enable = s5pv210_clk_mask1_ctrl,
> + .ctrlbit = (1 << 4),
> },
> };
>
> --
> 1.6.2.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions
@ 2010-05-17 1:09 ` Ben Dooks
0 siblings, 0 replies; 4+ messages in thread
From: Ben Dooks @ 2010-05-17 1:09 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 17, 2010 at 09:39:05AM +0900, Kukjin Kim wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> The non-glitch-free clock muxes can suffer from glitches when changing
> clock sources. It is recommended to disable the output of non-glitch-
> free muxes before trying to change the clock source. After clock change
> is complete, the non-glitch-free clock can be re-enabled.
>
> These clocks are added to the list of clocks to be enabled at boot time.
> Device drivers that need to disable the non-glitch-free mux output clock
> can 'clk_get' these clocks, disable them, change the clock selection
> of the mux and then re-enable the non-glitch-free mux output.
Hmm, this is something we may have to get into the clock layer itself
and keep away from the drivers involved. Can these clocks be hard connected
to their sources?
At least putting some form of comment in with the clock addition to note
that there is this problem would be useful.
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
> arch/arm/mach-s5pv210/clock.c | 140 +++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 140 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
> index 154bca4..a2c3ab5 100644
> --- a/arch/arm/mach-s5pv210/clock.c
> +++ b/arch/arm/mach-s5pv210/clock.c
> @@ -183,6 +183,11 @@ static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
> return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
> }
>
> +static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
> +}
> +
> static struct clk clk_sclk_hdmi27m = {
> .name = "sclk_hdmi27m",
> .id = -1,
> @@ -448,6 +453,141 @@ static struct clk init_clocks[] = {
> .parent = &clk_pclk_psys.clk,
> .enable = s5pv210_clk_ip3_ctrl,
> .ctrlbit = (1<<10),
> + }, {
> + .name = "mout_hdmi",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "mout_mixer",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "mout_dac",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "mout_cam",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "mout_cam",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "mout_fimd",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "mout_csis",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "mout_finvpll",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "mout_mmc",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 8),
> + }, {
> + .name = "mout_mmc",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 9),
> + }, {
> + .name = "mout_mmc",
> + .id = 2,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 10),
> + }, {
> + .name = "mout_mmc",
> + .id = 3,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 11),
> + }, {
> + .name = "mout_uart",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 12),
> + }, {
> + .name = "mout_uart",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 13),
> + }, {
> + .name = "mout_uart",
> + .id = 2,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 14),
> + }, {
> + .name = "mout_uart",
> + .id = 3,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 15),
> + }, {
> + .name = "mout_spi",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 16),
> + }, {
> + .name = "mout_spi",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 17),
> + }, {
> + .name = "mout_pwm",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 19),
> + }, {
> + .name = "mout_audio",
> + .id = 0,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 24),
> + }, {
> + .name = "mout_audio",
> + .id = 1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 25),
> + }, {
> + .name = "mout_audio",
> + .id = 2,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 26),
> + }, {
> + .name = "mout_spdif",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 27),
> + }, {
> + .name = "mout_pwi",
> + .id = -1,
> + .enable = s5pv210_clk_mask0_ctrl,
> + .ctrlbit = (1 << 29),
> + }, {
> + .name = "mout_fimc",
> + .id = 0,
> + .enable = s5pv210_clk_mask1_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "mout_fimc",
> + .id = 1,
> + .enable = s5pv210_clk_mask1_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "mout_fimc",
> + .id = 2,
> + .enable = s5pv210_clk_mask1_ctrl,
> + .ctrlbit = (1 << 4),
> },
> };
>
> --
> 1.6.2.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-05-17 1:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-17 0:39 [PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions Kukjin Kim
2010-05-17 0:39 ` Kukjin Kim
2010-05-17 1:09 ` Ben Dooks
2010-05-17 1:09 ` Ben Dooks
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.