* Common plat-s5p fixes
@ 2010-05-17 6:29 ` Marek Szyprowski
0 siblings, 0 replies; 14+ messages in thread
From: Marek Szyprowski @ 2010-05-17 6:29 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
This patch series contains some core plat-s5p fixes, required for both
plat-s5pc1xx cleanup series as well as patches that add Samsung Aquila
board support. This patch series has been rebase onto next-samsung git
tree.
This is a resend of these patches. They were already posted as a part of
other patch series. However most of them are outdated and do not apply
onto the current next-samsung tree.
The series contain the following patches:
[PATCH 1/3] ARM: Samsung: fix broken timer irq base
[PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories
[PATCH 3/3] ARM: Samsung: move driver strength gpio configuration helper to common dir
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/3] ARM: Samsung: fix broken timer irq base
2010-05-17 6:29 ` Marek Szyprowski
@ 2010-05-17 6:29 ` Marek Szyprowski
-1 siblings, 0 replies; 14+ messages in thread
From: Marek Szyprowski @ 2010-05-17 6:29 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc
Cc: m.szyprowski, kyungmin.park, ben-linux, kgene.kim
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/plat-s5p/include/plat/irqs.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 42e757f..9ff3d71 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -79,7 +79,7 @@
#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
+#define S5P_TIMER_IRQ(x) (11 + (x))
#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
--
1.6.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/3] ARM: Samsung: fix broken timer irq base
@ 2010-05-17 6:29 ` Marek Szyprowski
0 siblings, 0 replies; 14+ messages in thread
From: Marek Szyprowski @ 2010-05-17 6:29 UTC (permalink / raw)
To: linux-arm-kernel
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/plat-s5p/include/plat/irqs.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 42e757f..9ff3d71 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -79,7 +79,7 @@
#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
+#define S5P_TIMER_IRQ(x) (11 + (x))
#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
--
1.6.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 1/3] ARM: Samsung: fix broken timer irq base
2010-05-17 6:29 ` Marek Szyprowski
@ 2010-05-17 8:12 ` Ben Dooks
-1 siblings, 0 replies; 14+ messages in thread
From: Ben Dooks @ 2010-05-17 8:12 UTC (permalink / raw)
To: Marek Szyprowski
Cc: linux-arm-kernel, linux-samsung-soc, kyungmin.park, kgene.kim,
ben-linux
On Mon, May 17, 2010 at 08:29:53AM +0200, Marek Szyprowski wrote:
> Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
> (32-64). This was caused probably by a typo while the common interrupts
> definition was refactored. This patch moves timer interrupt range to safe
> area of 11-15 (just before uart range).
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/plat-s5p/include/plat/irqs.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
> index 42e757f..9ff3d71 100644
> --- a/arch/arm/plat-s5p/include/plat/irqs.h
> +++ b/arch/arm/plat-s5p/include/plat/irqs.h
> @@ -79,7 +79,7 @@
> #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
> #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
>
> -#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
> +#define S5P_TIMER_IRQ(x) (11 + (x))
87aef30e (Atul Dahiya 2010-01-29 09:08:28 +0900 82) #define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
is the one to blame here.
ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.
Currently, S5P_TIMER_IRQ is based at the end of VICs. This patch changes
the S5P_TIMER_IRQ base from end of VICs to 11 in ISA IRQ space.
No of VICs varies between SOCs. This causes an exception on S5P6442.
Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
So it looks like this was intended to re-use the ISA interrupt range
but didn't get it quite right.
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH 1/3] ARM: Samsung: fix broken timer irq base
@ 2010-05-17 8:12 ` Ben Dooks
0 siblings, 0 replies; 14+ messages in thread
From: Ben Dooks @ 2010-05-17 8:12 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 17, 2010 at 08:29:53AM +0200, Marek Szyprowski wrote:
> Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
> (32-64). This was caused probably by a typo while the common interrupts
> definition was refactored. This patch moves timer interrupt range to safe
> area of 11-15 (just before uart range).
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/plat-s5p/include/plat/irqs.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
> index 42e757f..9ff3d71 100644
> --- a/arch/arm/plat-s5p/include/plat/irqs.h
> +++ b/arch/arm/plat-s5p/include/plat/irqs.h
> @@ -79,7 +79,7 @@
> #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
> #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
>
> -#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
> +#define S5P_TIMER_IRQ(x) (11 + (x))
87aef30e (Atul Dahiya 2010-01-29 09:08:28 +0900 82) #define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
is the one to blame here.
ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.
Currently, S5P_TIMER_IRQ is based at the end of VICs. This patch changes
the S5P_TIMER_IRQ base from end of VICs to 11 in ISA IRQ space.
No of VICs varies between SOCs. This causes an exception on S5P6442.
Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
So it looks like this was intended to re-use the ISA interrupt range
but didn't get it quite right.
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories
2010-05-17 6:29 ` Marek Szyprowski
@ 2010-05-17 6:29 ` Marek Szyprowski
-1 siblings, 0 replies; 14+ messages in thread
From: Marek Szyprowski @ 2010-05-17 6:29 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc
Cc: m.szyprowski, kyungmin.park, ben-linux, kgene.kim
I2C0 device helper depend on GPIO pin defines that are SoC specific.
This patch copies the dummy i2c0 setup code to the respective mach-s5p*
directories, so each SoC will be able to implement using its own
defines.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-s5p6440/Makefile | 1 +
arch/arm/mach-s5p6440/setup-i2c0.c | 25 +++++++++++++++++++++++++
arch/arm/mach-s5p6442/Makefile | 1 +
arch/arm/mach-s5p6442/setup-i2c0.c | 25 +++++++++++++++++++++++++
arch/arm/mach-s5pv210/Makefile | 1 +
arch/arm/mach-s5pv210/setup-i2c0.c | 25 +++++++++++++++++++++++++
arch/arm/plat-s5p/Makefile | 1 -
arch/arm/plat-s5p/setup-i2c0.c | 25 -------------------------
8 files changed, 78 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/mach-s5p6440/setup-i2c0.c
create mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c
create mode 100644 arch/arm/mach-s5pv210/setup-i2c0.c
delete mode 100644 arch/arm/plat-s5p/setup-i2c0.c
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
index 1ad894b..9646cdf 100644
--- a/arch/arm/mach-s5p6440/Makefile
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5P6440 system
obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
+obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
# machine support
diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c
new file mode 100644
index 0000000..69e8a66
--- /dev/null
+++ b/arch/arm/mach-s5p6440/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
index dde39a6..4942c14 100644
--- a/arch/arm/mach-s5p6442/Makefile
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5P6442 system
obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
# machine support
diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c
new file mode 100644
index 0000000..662695d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 8ebf51c..1a972a5 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5PV210 system
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
# machine support
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
new file mode 100644
index 0000000..27de0c1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-s5pv210/setup-i2c2.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * Base S5PV210 I2C bus 0 gpio configuration
+ *
+ * Based on mach-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index a7c54b3..0ec09a9 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -16,4 +16,3 @@ obj-y += dev-uart.o
obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
-obj-y += setup-i2c0.o
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c
deleted file mode 100644
index 67a66e0..0000000
--- a/arch/arm/plat-s5p/setup-i2c0.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/plat-s5p/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- /* Will be populated later */
-}
--
1.6.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories
@ 2010-05-17 6:29 ` Marek Szyprowski
0 siblings, 0 replies; 14+ messages in thread
From: Marek Szyprowski @ 2010-05-17 6:29 UTC (permalink / raw)
To: linux-arm-kernel
I2C0 device helper depend on GPIO pin defines that are SoC specific.
This patch copies the dummy i2c0 setup code to the respective mach-s5p*
directories, so each SoC will be able to implement using its own
defines.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-s5p6440/Makefile | 1 +
arch/arm/mach-s5p6440/setup-i2c0.c | 25 +++++++++++++++++++++++++
arch/arm/mach-s5p6442/Makefile | 1 +
arch/arm/mach-s5p6442/setup-i2c0.c | 25 +++++++++++++++++++++++++
arch/arm/mach-s5pv210/Makefile | 1 +
arch/arm/mach-s5pv210/setup-i2c0.c | 25 +++++++++++++++++++++++++
arch/arm/plat-s5p/Makefile | 1 -
arch/arm/plat-s5p/setup-i2c0.c | 25 -------------------------
8 files changed, 78 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/mach-s5p6440/setup-i2c0.c
create mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c
create mode 100644 arch/arm/mach-s5pv210/setup-i2c0.c
delete mode 100644 arch/arm/plat-s5p/setup-i2c0.c
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
index 1ad894b..9646cdf 100644
--- a/arch/arm/mach-s5p6440/Makefile
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5P6440 system
obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
+obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
# machine support
diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c
new file mode 100644
index 0000000..69e8a66
--- /dev/null
+++ b/arch/arm/mach-s5p6440/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
index dde39a6..4942c14 100644
--- a/arch/arm/mach-s5p6442/Makefile
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5P6442 system
obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
# machine support
diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c
new file mode 100644
index 0000000..662695d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 8ebf51c..1a972a5 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5PV210 system
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
# machine support
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
new file mode 100644
index 0000000..27de0c1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-s5pv210/setup-i2c2.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * Base S5PV210 I2C bus 0 gpio configuration
+ *
+ * Based on mach-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index a7c54b3..0ec09a9 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -16,4 +16,3 @@ obj-y += dev-uart.o
obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
-obj-y += setup-i2c0.o
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c
deleted file mode 100644
index 67a66e0..0000000
--- a/arch/arm/plat-s5p/setup-i2c0.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/plat-s5p/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- /* Will be populated later */
-}
--
1.6.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* RE: [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories
2010-05-17 6:29 ` Marek Szyprowski
@ 2010-05-17 13:14 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2010-05-17 13:14 UTC (permalink / raw)
To: 'Marek Szyprowski', linux-arm-kernel, linux-samsung-soc
Cc: kyungmin.park, ben-linux
Marek Szyprowski wrote:
>
> I2C0 device helper depend on GPIO pin defines that are SoC specific.
> This patch copies the dummy i2c0 setup code to the respective mach-s5p*
> directories, so each SoC will be able to implement using its own
> defines.
Yes, right.
Looks good except header of mach-s5pv210/setup-i2c0.c
And as I reviewed, how about re-submitting this patch with c100 i2c moving?
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/mach-s5p6440/Makefile | 1 +
> arch/arm/mach-s5p6440/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5p6442/Makefile | 1 +
> arch/arm/mach-s5p6442/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5pv210/Makefile | 1 +
> arch/arm/mach-s5pv210/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/plat-s5p/Makefile | 1 -
> arch/arm/plat-s5p/setup-i2c0.c | 25 -------------------------
> 8 files changed, 78 insertions(+), 26 deletions(-)
> create mode 100644 arch/arm/mach-s5p6440/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5pv210/setup-i2c0.c
> delete mode 100644 arch/arm/plat-s5p/setup-i2c0.c
>
> diff --git a/arch/arm/mach-s5p6440/Makefile
b/arch/arm/mach-s5p6440/Makefile
> index 1ad894b..9646cdf 100644
> --- a/arch/arm/mach-s5p6440/Makefile
> +++ b/arch/arm/mach-s5p6440/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5P6440 system
>
> obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
> +obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c
b/arch/arm/mach-s5p6440/setup-
> i2c0.c
> new file mode 100644
> index 0000000..69e8a66
> --- /dev/null
> +++ b/arch/arm/mach-s5p6440/setup-i2c0.c
> @@ -0,0 +1,25 @@
> +/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
> + *
> + * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * I2C0 GPIO configuration.
> + *
> + * Based on plat-s3c64xx/setup-i2c0.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +
> +struct platform_device; /* don't need the contents */
> +
> +#include <plat/iic.h>
> +
> +void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> +{
> + /* Will be populated later */
> +}
> diff --git a/arch/arm/mach-s5p6442/Makefile
b/arch/arm/mach-s5p6442/Makefile
> index dde39a6..4942c14 100644
> --- a/arch/arm/mach-s5p6442/Makefile
> +++ b/arch/arm/mach-s5p6442/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5P6442 system
>
> obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
> +obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c
b/arch/arm/mach-s5p6442/setup-
> i2c0.c
> new file mode 100644
> index 0000000..662695d
> --- /dev/null
> +++ b/arch/arm/mach-s5p6442/setup-i2c0.c
> @@ -0,0 +1,25 @@
> +/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
> + *
> + * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * I2C0 GPIO configuration.
> + *
> + * Based on plat-s3c64xx/setup-i2c0.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +
> +struct platform_device; /* don't need the contents */
> +
> +#include <plat/iic.h>
> +
> +void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> +{
> + /* Will be populated later */
> +}
> diff --git a/arch/arm/mach-s5pv210/Makefile
b/arch/arm/mach-s5pv210/Makefile
> index 8ebf51c..1a972a5 100644
> --- a/arch/arm/mach-s5pv210/Makefile
> +++ b/arch/arm/mach-s5pv210/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5PV210 system
>
> obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
> +obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c
b/arch/arm/mach-s5pv210/setup-
> i2c0.c
> new file mode 100644
> index 0000000..27de0c1
> --- /dev/null
> +++ b/arch/arm/mach-s5pv210/setup-i2c0.c
> @@ -0,0 +1,25 @@
> +/*
> + * linux/arch/arm/mach-s5pv210/setup-i2c2.c
> + *
> + * Copyright 2009 Samsung Electronics Co.
> + *
> + * Base S5PV210 I2C bus 0 gpio configuration
> + *
> + * Based on mach-s3c64xx/setup-i2c0.c
Pleae keep the original header from plat-s5p/setup-i2c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +
> +struct platform_device; /* don't need the contents */
> +
> +#include <plat/iic.h>
> +
> +void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> +{
> + /* Will be populated later */
> +}
> diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
> index a7c54b3..0ec09a9 100644
> --- a/arch/arm/plat-s5p/Makefile
> +++ b/arch/arm/plat-s5p/Makefile
> @@ -16,4 +16,3 @@ obj-y += dev-uart.o
> obj-y += cpu.o
> obj-y += clock.o
> obj-y += irq.o
> -obj-y += setup-i2c0.o
> diff --git a/arch/arm/plat-s5p/setup-i2c0.c
b/arch/arm/plat-s5p/setup-i2c0.c
> deleted file mode 100644
> index 67a66e0..0000000
> --- a/arch/arm/plat-s5p/setup-i2c0.c
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -/* linux/arch/arm/plat-s5p/setup-i2c0.c
> - *
> - * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com/
> - *
> - * I2C0 GPIO configuration.
> - *
> - * Based on plat-s3c64xx/setup-i2c0.c
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -
> -struct platform_device; /* don't need the contents */
> -
> -#include <plat/iic.h>
> -
> -void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> -{
> - /* Will be populated later */
> -}
> --
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories
@ 2010-05-17 13:14 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2010-05-17 13:14 UTC (permalink / raw)
To: linux-arm-kernel
Marek Szyprowski wrote:
>
> I2C0 device helper depend on GPIO pin defines that are SoC specific.
> This patch copies the dummy i2c0 setup code to the respective mach-s5p*
> directories, so each SoC will be able to implement using its own
> defines.
Yes, right.
Looks good except header of mach-s5pv210/setup-i2c0.c
And as I reviewed, how about re-submitting this patch with c100 i2c moving?
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/mach-s5p6440/Makefile | 1 +
> arch/arm/mach-s5p6440/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5p6442/Makefile | 1 +
> arch/arm/mach-s5p6442/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5pv210/Makefile | 1 +
> arch/arm/mach-s5pv210/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/plat-s5p/Makefile | 1 -
> arch/arm/plat-s5p/setup-i2c0.c | 25 -------------------------
> 8 files changed, 78 insertions(+), 26 deletions(-)
> create mode 100644 arch/arm/mach-s5p6440/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5pv210/setup-i2c0.c
> delete mode 100644 arch/arm/plat-s5p/setup-i2c0.c
>
> diff --git a/arch/arm/mach-s5p6440/Makefile
b/arch/arm/mach-s5p6440/Makefile
> index 1ad894b..9646cdf 100644
> --- a/arch/arm/mach-s5p6440/Makefile
> +++ b/arch/arm/mach-s5p6440/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5P6440 system
>
> obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
> +obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c
b/arch/arm/mach-s5p6440/setup-
> i2c0.c
> new file mode 100644
> index 0000000..69e8a66
> --- /dev/null
> +++ b/arch/arm/mach-s5p6440/setup-i2c0.c
> @@ -0,0 +1,25 @@
> +/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
> + *
> + * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * I2C0 GPIO configuration.
> + *
> + * Based on plat-s3c64xx/setup-i2c0.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +
> +struct platform_device; /* don't need the contents */
> +
> +#include <plat/iic.h>
> +
> +void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> +{
> + /* Will be populated later */
> +}
> diff --git a/arch/arm/mach-s5p6442/Makefile
b/arch/arm/mach-s5p6442/Makefile
> index dde39a6..4942c14 100644
> --- a/arch/arm/mach-s5p6442/Makefile
> +++ b/arch/arm/mach-s5p6442/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5P6442 system
>
> obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
> +obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c
b/arch/arm/mach-s5p6442/setup-
> i2c0.c
> new file mode 100644
> index 0000000..662695d
> --- /dev/null
> +++ b/arch/arm/mach-s5p6442/setup-i2c0.c
> @@ -0,0 +1,25 @@
> +/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
> + *
> + * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * I2C0 GPIO configuration.
> + *
> + * Based on plat-s3c64xx/setup-i2c0.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +
> +struct platform_device; /* don't need the contents */
> +
> +#include <plat/iic.h>
> +
> +void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> +{
> + /* Will be populated later */
> +}
> diff --git a/arch/arm/mach-s5pv210/Makefile
b/arch/arm/mach-s5pv210/Makefile
> index 8ebf51c..1a972a5 100644
> --- a/arch/arm/mach-s5pv210/Makefile
> +++ b/arch/arm/mach-s5pv210/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5PV210 system
>
> obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
> +obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c
b/arch/arm/mach-s5pv210/setup-
> i2c0.c
> new file mode 100644
> index 0000000..27de0c1
> --- /dev/null
> +++ b/arch/arm/mach-s5pv210/setup-i2c0.c
> @@ -0,0 +1,25 @@
> +/*
> + * linux/arch/arm/mach-s5pv210/setup-i2c2.c
> + *
> + * Copyright 2009 Samsung Electronics Co.
> + *
> + * Base S5PV210 I2C bus 0 gpio configuration
> + *
> + * Based on mach-s3c64xx/setup-i2c0.c
Pleae keep the original header from plat-s5p/setup-i2c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +
> +struct platform_device; /* don't need the contents */
> +
> +#include <plat/iic.h>
> +
> +void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> +{
> + /* Will be populated later */
> +}
> diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
> index a7c54b3..0ec09a9 100644
> --- a/arch/arm/plat-s5p/Makefile
> +++ b/arch/arm/plat-s5p/Makefile
> @@ -16,4 +16,3 @@ obj-y += dev-uart.o
> obj-y += cpu.o
> obj-y += clock.o
> obj-y += irq.o
> -obj-y += setup-i2c0.o
> diff --git a/arch/arm/plat-s5p/setup-i2c0.c
b/arch/arm/plat-s5p/setup-i2c0.c
> deleted file mode 100644
> index 67a66e0..0000000
> --- a/arch/arm/plat-s5p/setup-i2c0.c
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -/* linux/arch/arm/plat-s5p/setup-i2c0.c
> - *
> - * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com/
> - *
> - * I2C0 GPIO configuration.
> - *
> - * Based on plat-s3c64xx/setup-i2c0.c
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -
> -struct platform_device; /* don't need the contents */
> -
> -#include <plat/iic.h>
> -
> -void s3c_i2c0_cfg_gpio(struct platform_device *dev)
> -{
> - /* Will be populated later */
> -}
> --
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories
2010-05-17 6:29 ` Marek Szyprowski
@ 2010-05-17 13:20 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2010-05-17 13:20 UTC (permalink / raw)
To: 'Marek Szyprowski', linux-arm-kernel, linux-samsung-soc
Cc: kyungmin.park, ben-linux
Marek Szyprowski wrote:
>
> I2C0 device helper depend on GPIO pin defines that are SoC specific.
> This patch copies the dummy i2c0 setup code to the respective mach-s5p*
> directories, so each SoC will be able to implement using its own
> defines.
One more, moving from plat-s5p/ is better than creating.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/mach-s5p6440/Makefile | 1 +
> arch/arm/mach-s5p6440/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5p6442/Makefile | 1 +
> arch/arm/mach-s5p6442/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5pv210/Makefile | 1 +
> arch/arm/mach-s5pv210/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/plat-s5p/Makefile | 1 -
> arch/arm/plat-s5p/setup-i2c0.c | 25 -------------------------
> 8 files changed, 78 insertions(+), 26 deletions(-)
> create mode 100644 arch/arm/mach-s5p6440/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5pv210/setup-i2c0.c
> delete mode 100644 arch/arm/plat-s5p/setup-i2c0.c
>
(snip)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories
@ 2010-05-17 13:20 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2010-05-17 13:20 UTC (permalink / raw)
To: linux-arm-kernel
Marek Szyprowski wrote:
>
> I2C0 device helper depend on GPIO pin defines that are SoC specific.
> This patch copies the dummy i2c0 setup code to the respective mach-s5p*
> directories, so each SoC will be able to implement using its own
> defines.
One more, moving from plat-s5p/ is better than creating.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/mach-s5p6440/Makefile | 1 +
> arch/arm/mach-s5p6440/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5p6442/Makefile | 1 +
> arch/arm/mach-s5p6442/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/mach-s5pv210/Makefile | 1 +
> arch/arm/mach-s5pv210/setup-i2c0.c | 25 +++++++++++++++++++++++++
> arch/arm/plat-s5p/Makefile | 1 -
> arch/arm/plat-s5p/setup-i2c0.c | 25 -------------------------
> 8 files changed, 78 insertions(+), 26 deletions(-)
> create mode 100644 arch/arm/mach-s5p6440/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c
> create mode 100644 arch/arm/mach-s5pv210/setup-i2c0.c
> delete mode 100644 arch/arm/plat-s5p/setup-i2c0.c
>
(snip)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 3/3] ARM: Samsung: move driver strength gpio configuration helper to common dir
2010-05-17 6:29 ` Marek Szyprowski
@ 2010-05-17 6:29 ` Marek Szyprowski
-1 siblings, 0 replies; 14+ messages in thread
From: Marek Szyprowski @ 2010-05-17 6:29 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc
Cc: m.szyprowski, kyungmin.park, ben-linux, kgene.kim
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/plat-s5p/Kconfig | 1 +
arch/arm/plat-s5pc1xx/Kconfig | 2 +-
arch/arm/plat-s5pc1xx/Makefile | 1 -
arch/arm/plat-s5pc1xx/gpio-config.c | 62 --------------------
.../plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h | 32 ----------
arch/arm/plat-s5pc1xx/setup-fb-24bpp.c | 1 -
arch/arm/plat-samsung/Kconfig | 12 ++--
arch/arm/plat-samsung/gpio-config.c | 48 +++++++++++++++
arch/arm/plat-samsung/include/plat/gpio-cfg.h | 30 ++++++++++
9 files changed, 86 insertions(+), 103 deletions(-)
delete mode 100644 arch/arm/plat-s5pc1xx/gpio-config.c
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index d400a6a..92bd756 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -13,6 +13,7 @@ config PLAT_S5P
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
+ select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select S3C_GPIO_CFG_S3C64XX
select S3C_GPIO_PULL_UPDOWN
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index c7ccdf2..79d3be7 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -16,9 +16,9 @@ config PLAT_S5PC1XX
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
+ select S5P_GPIO_DRVSTR
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
- select S5P_GPIO_CFG_S5PC1XX
help
Base platform code for any Samsung S5PC1XX device
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index 278f268..66a8f3e 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
# Device setup
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
deleted file mode 100644
index a4f67e8..0000000
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 drvstr;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- drvstr = __raw_readl(reg);
- drvstr = 0xffff & (0x3 << shift);
- drvstr = drvstr >> shift;
-
- return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 tmp;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- tmp = __raw_readl(reg);
- tmp |= drvstr << shift;
-
- __raw_writel(tmp, reg);
-
- return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
deleted file mode 100644
index 72ad59f..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1 0x00
-#define S5P_GPIO_DRVSTR_LV2 0x01
-#define S5P_GPIO_DRVSTR_LV3 0x10
-#define S5P_GPIO_DRVSTR_LV4 0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
index 1a63768..b02c36f 100644
--- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -19,7 +19,6 @@
#include <mach/map.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
#define DISR_OFFSET 0x7008
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 287e6f7..6ccfd60 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX
Internal configuration to enable S3C64XX style GPIO configuration
functions.
-config S5P_GPIO_CFG_S5PC1XX
- bool
- help
- Internal configuration to enable S5PC1XX style GPIO configuration
- functions.
-
config S3C_GPIO_PULL_UPDOWN
bool
help
@@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP
help
Internal configuration to enable the correct GPIO pull helper
+config S5P_GPIO_DRVSTR
+ bool
+ help
+ Internal configuration to get and set correct GPIO driver strength
+ helper
+
config SAMSUNG_GPIO_EXTRA
int "Number of additional GPIO pins"
default 0
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 3282db3..d0e67a2 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -261,3 +261,51 @@ s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = 0xffff & (0x3 << shift);
+ drvstr = drvstr >> shift;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif /* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 8d01e85..34efdd2 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -25,6 +25,7 @@
#define __PLAT_GPIO_CFG_H __FILE__
typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
struct s3c_gpio_chip;
@@ -118,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
*/
extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5C series.
+ */
+#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00)
+#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01)
+#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10)
+#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successfull, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
#endif /* __PLAT_GPIO_CFG_H */
--
1.6.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 3/3] ARM: Samsung: move driver strength gpio configuration helper to common dir
@ 2010-05-17 6:29 ` Marek Szyprowski
0 siblings, 0 replies; 14+ messages in thread
From: Marek Szyprowski @ 2010-05-17 6:29 UTC (permalink / raw)
To: linux-arm-kernel
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/plat-s5p/Kconfig | 1 +
arch/arm/plat-s5pc1xx/Kconfig | 2 +-
arch/arm/plat-s5pc1xx/Makefile | 1 -
arch/arm/plat-s5pc1xx/gpio-config.c | 62 --------------------
.../plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h | 32 ----------
arch/arm/plat-s5pc1xx/setup-fb-24bpp.c | 1 -
arch/arm/plat-samsung/Kconfig | 12 ++--
arch/arm/plat-samsung/gpio-config.c | 48 +++++++++++++++
arch/arm/plat-samsung/include/plat/gpio-cfg.h | 30 ++++++++++
9 files changed, 86 insertions(+), 103 deletions(-)
delete mode 100644 arch/arm/plat-s5pc1xx/gpio-config.c
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index d400a6a..92bd756 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -13,6 +13,7 @@ config PLAT_S5P
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
+ select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select S3C_GPIO_CFG_S3C64XX
select S3C_GPIO_PULL_UPDOWN
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index c7ccdf2..79d3be7 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -16,9 +16,9 @@ config PLAT_S5PC1XX
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
+ select S5P_GPIO_DRVSTR
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
- select S5P_GPIO_CFG_S5PC1XX
help
Base platform code for any Samsung S5PC1XX device
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index 278f268..66a8f3e 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
# Device setup
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
deleted file mode 100644
index a4f67e8..0000000
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 drvstr;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- drvstr = __raw_readl(reg);
- drvstr = 0xffff & (0x3 << shift);
- drvstr = drvstr >> shift;
-
- return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 tmp;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- tmp = __raw_readl(reg);
- tmp |= drvstr << shift;
-
- __raw_writel(tmp, reg);
-
- return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
deleted file mode 100644
index 72ad59f..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1 0x00
-#define S5P_GPIO_DRVSTR_LV2 0x01
-#define S5P_GPIO_DRVSTR_LV3 0x10
-#define S5P_GPIO_DRVSTR_LV4 0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
index 1a63768..b02c36f 100644
--- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -19,7 +19,6 @@
#include <mach/map.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
#define DISR_OFFSET 0x7008
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 287e6f7..6ccfd60 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX
Internal configuration to enable S3C64XX style GPIO configuration
functions.
-config S5P_GPIO_CFG_S5PC1XX
- bool
- help
- Internal configuration to enable S5PC1XX style GPIO configuration
- functions.
-
config S3C_GPIO_PULL_UPDOWN
bool
help
@@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP
help
Internal configuration to enable the correct GPIO pull helper
+config S5P_GPIO_DRVSTR
+ bool
+ help
+ Internal configuration to get and set correct GPIO driver strength
+ helper
+
config SAMSUNG_GPIO_EXTRA
int "Number of additional GPIO pins"
default 0
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 3282db3..d0e67a2 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -261,3 +261,51 @@ s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = 0xffff & (0x3 << shift);
+ drvstr = drvstr >> shift;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif /* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 8d01e85..34efdd2 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -25,6 +25,7 @@
#define __PLAT_GPIO_CFG_H __FILE__
typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
struct s3c_gpio_chip;
@@ -118,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
*/
extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5C series.
+ */
+#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00)
+#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01)
+#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10)
+#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successfull, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
#endif /* __PLAT_GPIO_CFG_H */
--
1.6.4
^ permalink raw reply related [flat|nested] 14+ messages in thread