From: Ben Dooks <ben-linux@fluff.org>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, ben-linux@fluff.org,
Atul Dahiya <atul.dahiya@samsung.com>,
Sangbeom Kim <sbkim73@samsung.com>
Subject: Re: [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung
Date: Tue, 18 May 2010 08:12:57 +0100 [thread overview]
Message-ID: <20100518071257.GD26401@trinity.fluff.org> (raw)
In-Reply-To: <1274162336-32667-1-git-send-email-kgene.kim@samsung.com>
On Tue, May 18, 2010 at 02:58:56PM +0900, Kukjin Kim wrote:
> From: Atul Dahiya <atul.dahiya@samsung.com>
>
> This patch moves RTC device definitions from mach-s3c64xx
> to plat-samsung, to enable the other SoCs to use same device
> definition.
>
> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
ok, will apply to a branch.
> ---
> arch/arm/mach-s3c64xx/Makefile | 1 -
> arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
> arch/arm/plat-samsung/Kconfig | 5 +++
> arch/arm/plat-samsung/Makefile | 1 +
> arch/arm/{mach-s3c64xx => plat-samsung}/dev-rtc.c | 28 ++++++++++----------
> 5 files changed, 21 insertions(+), 15 deletions(-)
> rename arch/arm/{mach-s3c64xx => plat-samsung}/dev-rtc.c (58%)
>
> diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
> index a690a9d..e7ac812 100644
> --- a/arch/arm/mach-s3c64xx/Makefile
> +++ b/arch/arm/mach-s3c64xx/Makefile
> @@ -56,7 +56,6 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
> # device support
>
> obj-y += dev-uart.o
> -obj-y += dev-rtc.o
> obj-y += dev-audio.o
> obj-$(CONFIG_S3C_ADC) += dev-adc.o
> obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
> diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
> index 801c1c0..cce28a9 100644
> --- a/arch/arm/mach-s3c64xx/include/mach/map.h
> +++ b/arch/arm/mach-s3c64xx/include/mach/map.h
> @@ -103,5 +103,6 @@
> #define S3C_PA_USBHOST S3C64XX_PA_USBHOST
> #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
> #define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
> +#define S3C_PA_RTC S3C64XX_PA_RTC
>
> #endif /* __ASM_ARCH_6400_MAP_H */
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 287e6f7..29e2800 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -190,6 +190,11 @@ config S3C_DEV_NAND
> help
> Compile in platform device definition for NAND controller
>
> +config S3C_DEV_RTC
> + bool
> + help
> + Complie in platform device definition for RTC
> +
> config S3C64XX_DEV_SPI
> bool
> help
> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
> index 0ad820a..af17434 100644
> --- a/arch/arm/plat-samsung/Makefile
> +++ b/arch/arm/plat-samsung/Makefile
> @@ -41,6 +41,7 @@ obj-y += dev-uart.o
> obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
> obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
> obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
> +obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
>
> # DMA support
>
> diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/plat-samsung/dev-rtc.c
> similarity index 58%
> rename from arch/arm/mach-s3c64xx/dev-rtc.c
> rename to arch/arm/plat-samsung/dev-rtc.c
> index b9e7a05..bf4e226 100644
> --- a/arch/arm/mach-s3c64xx/dev-rtc.c
> +++ b/arch/arm/plat-samsung/dev-rtc.c
> @@ -1,4 +1,4 @@
> -/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
> +/* linux/arch/arm/plat-samsung/dev-rtc.c
> *
> * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
> *
> @@ -18,26 +18,26 @@
>
> static struct resource s3c_rtc_resource[] = {
> [0] = {
> - .start = S3C64XX_PA_RTC,
> - .end = S3C64XX_PA_RTC + 0xff,
> - .flags = IORESOURCE_MEM,
> + .start = S3C_PA_RTC,
> + .end = S3C_PA_RTC + 0xff,
> + .flags = IORESOURCE_MEM,
> },
> [1] = {
> - .start = IRQ_RTC_ALARM,
> - .end = IRQ_RTC_ALARM,
> - .flags = IORESOURCE_IRQ,
> + .start = IRQ_RTC_ALARM,
> + .end = IRQ_RTC_ALARM,
> + .flags = IORESOURCE_IRQ,
> },
> [2] = {
> - .start = IRQ_RTC_TIC,
> - .end = IRQ_RTC_TIC,
> - .flags = IORESOURCE_IRQ
> + .start = IRQ_RTC_TIC,
> + .end = IRQ_RTC_TIC,
> + .flags = IORESOURCE_IRQ
> }
> };
>
> struct platform_device s3c_device_rtc = {
> - .name = "s3c64xx-rtc",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(s3c_rtc_resource),
> - .resource = s3c_rtc_resource,
> + .name = "s3c64xx-rtc",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(s3c_rtc_resource),
> + .resource = s3c_rtc_resource,
> };
> EXPORT_SYMBOL(s3c_device_rtc);
> --
> 1.6.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
WARNING: multiple messages have this Message-ID (diff)
From: ben-linux@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung
Date: Tue, 18 May 2010 08:12:57 +0100 [thread overview]
Message-ID: <20100518071257.GD26401@trinity.fluff.org> (raw)
In-Reply-To: <1274162336-32667-1-git-send-email-kgene.kim@samsung.com>
On Tue, May 18, 2010 at 02:58:56PM +0900, Kukjin Kim wrote:
> From: Atul Dahiya <atul.dahiya@samsung.com>
>
> This patch moves RTC device definitions from mach-s3c64xx
> to plat-samsung, to enable the other SoCs to use same device
> definition.
>
> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
ok, will apply to a branch.
> ---
> arch/arm/mach-s3c64xx/Makefile | 1 -
> arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
> arch/arm/plat-samsung/Kconfig | 5 +++
> arch/arm/plat-samsung/Makefile | 1 +
> arch/arm/{mach-s3c64xx => plat-samsung}/dev-rtc.c | 28 ++++++++++----------
> 5 files changed, 21 insertions(+), 15 deletions(-)
> rename arch/arm/{mach-s3c64xx => plat-samsung}/dev-rtc.c (58%)
>
> diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
> index a690a9d..e7ac812 100644
> --- a/arch/arm/mach-s3c64xx/Makefile
> +++ b/arch/arm/mach-s3c64xx/Makefile
> @@ -56,7 +56,6 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
> # device support
>
> obj-y += dev-uart.o
> -obj-y += dev-rtc.o
> obj-y += dev-audio.o
> obj-$(CONFIG_S3C_ADC) += dev-adc.o
> obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
> diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
> index 801c1c0..cce28a9 100644
> --- a/arch/arm/mach-s3c64xx/include/mach/map.h
> +++ b/arch/arm/mach-s3c64xx/include/mach/map.h
> @@ -103,5 +103,6 @@
> #define S3C_PA_USBHOST S3C64XX_PA_USBHOST
> #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
> #define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
> +#define S3C_PA_RTC S3C64XX_PA_RTC
>
> #endif /* __ASM_ARCH_6400_MAP_H */
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 287e6f7..29e2800 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -190,6 +190,11 @@ config S3C_DEV_NAND
> help
> Compile in platform device definition for NAND controller
>
> +config S3C_DEV_RTC
> + bool
> + help
> + Complie in platform device definition for RTC
> +
> config S3C64XX_DEV_SPI
> bool
> help
> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
> index 0ad820a..af17434 100644
> --- a/arch/arm/plat-samsung/Makefile
> +++ b/arch/arm/plat-samsung/Makefile
> @@ -41,6 +41,7 @@ obj-y += dev-uart.o
> obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
> obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
> obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
> +obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
>
> # DMA support
>
> diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/plat-samsung/dev-rtc.c
> similarity index 58%
> rename from arch/arm/mach-s3c64xx/dev-rtc.c
> rename to arch/arm/plat-samsung/dev-rtc.c
> index b9e7a05..bf4e226 100644
> --- a/arch/arm/mach-s3c64xx/dev-rtc.c
> +++ b/arch/arm/plat-samsung/dev-rtc.c
> @@ -1,4 +1,4 @@
> -/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
> +/* linux/arch/arm/plat-samsung/dev-rtc.c
> *
> * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
> *
> @@ -18,26 +18,26 @@
>
> static struct resource s3c_rtc_resource[] = {
> [0] = {
> - .start = S3C64XX_PA_RTC,
> - .end = S3C64XX_PA_RTC + 0xff,
> - .flags = IORESOURCE_MEM,
> + .start = S3C_PA_RTC,
> + .end = S3C_PA_RTC + 0xff,
> + .flags = IORESOURCE_MEM,
> },
> [1] = {
> - .start = IRQ_RTC_ALARM,
> - .end = IRQ_RTC_ALARM,
> - .flags = IORESOURCE_IRQ,
> + .start = IRQ_RTC_ALARM,
> + .end = IRQ_RTC_ALARM,
> + .flags = IORESOURCE_IRQ,
> },
> [2] = {
> - .start = IRQ_RTC_TIC,
> - .end = IRQ_RTC_TIC,
> - .flags = IORESOURCE_IRQ
> + .start = IRQ_RTC_TIC,
> + .end = IRQ_RTC_TIC,
> + .flags = IORESOURCE_IRQ
> }
> };
>
> struct platform_device s3c_device_rtc = {
> - .name = "s3c64xx-rtc",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(s3c_rtc_resource),
> - .resource = s3c_rtc_resource,
> + .name = "s3c64xx-rtc",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(s3c_rtc_resource),
> + .resource = s3c_rtc_resource,
> };
> EXPORT_SYMBOL(s3c_device_rtc);
> --
> 1.6.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
next prev parent reply other threads:[~2010-05-18 7:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-18 5:58 [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung Kukjin Kim
2010-05-18 5:58 ` Kukjin Kim
2010-05-18 7:12 ` Ben Dooks [this message]
2010-05-18 7:12 ` Ben Dooks
2010-05-18 8:03 ` Ben Dooks
2010-05-18 8:03 ` Ben Dooks
2010-05-18 19:13 ` Mark Brown
2010-05-18 19:13 ` Mark Brown
2010-05-19 2:04 ` Ben Dooks
2010-05-19 2:04 ` Ben Dooks
2010-05-19 2:15 ` Mark Brown
2010-05-19 2:15 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100518071257.GD26401@trinity.fluff.org \
--to=ben-linux@fluff.org \
--cc=atul.dahiya@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.