From: Yauhen Kharuzhy <jekhor@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: s3c-fb updates
Date: Wed, 19 May 2010 06:25:02 +0000 [thread overview]
Message-ID: <20100519062501.GA1429@jeknote.loshitsa1.net> (raw)
In-Reply-To: <20100519004519.GB4720@trinity.fluff.org>
On Wed, May 19, 2010 at 01:45:19AM +0100, Ben Dooks wrote:
> On Tue, May 18, 2010 at 11:35:00PM +0900, Kyungmin Park wrote:
> > Hi,
> >
> > On Tue, May 18, 2010 at 7:54 PM, Ben Dooks <ben-linux@fluff.org> wrote:
> > > Updates for the s3c-fb to improbe the build and update support
> > > for s5pv210 and s3c2416 devices.
> > >
> > > The dependency on Inki Dae's patches have been removed since they've
> > > not been reposted, and at-least one causes build failures.
> >
> > Ben please check your mailbox again. He sent it after your reply.
>
> no, what he sent was three patch files attached to a mail[1] which
> Andrew Morton replied to saying that these needed to be sent as proper
> patches with descriptions and other such things that patches have.
>
> > Anyway, how do you integrate the FIMD and FIMC features in current
> > driver? Any plans?
>
> I've been discussiong things with the engineers here. However, the first
> thing is to get the driver closer aligned to the one that Sys.LSI have
> been shipping, which means getting some missing features sorted out.
>
> By the way, which is the FIMC block? I've not seen any documentation
> referencing this as an block in the SoC.
FIMC is a camera interface block. It can output video stream directly to
display controller FIFO.
--
Yauhen Kharuzhy jekhor _at_ gmail.com
JID: jek@jabber.ru
A: No
Q: Should I quote below my post?
WARNING: multiple messages have this Message-ID (diff)
From: jekhor@gmail.com (Yauhen Kharuzhy)
To: linux-arm-kernel@lists.infradead.org
Subject: s3c-fb updates
Date: Wed, 19 May 2010 09:25:02 +0300 [thread overview]
Message-ID: <20100519062501.GA1429@jeknote.loshitsa1.net> (raw)
In-Reply-To: <20100519004519.GB4720@trinity.fluff.org>
On Wed, May 19, 2010 at 01:45:19AM +0100, Ben Dooks wrote:
> On Tue, May 18, 2010 at 11:35:00PM +0900, Kyungmin Park wrote:
> > Hi,
> >
> > On Tue, May 18, 2010 at 7:54 PM, Ben Dooks <ben-linux@fluff.org> wrote:
> > > Updates for the s3c-fb to improbe the build and update support
> > > for s5pv210 and s3c2416 devices.
> > >
> > > The dependency on Inki Dae's patches have been removed since they've
> > > not been reposted, and at-least one causes build failures.
> >
> > Ben please check your mailbox again. He sent it after your reply.
>
> no, what he sent was three patch files attached to a mail[1] which
> Andrew Morton replied to saying that these needed to be sent as proper
> patches with descriptions and other such things that patches have.
>
> > Anyway, how do you integrate the FIMD and FIMC features in current
> > driver? Any plans?
>
> I've been discussiong things with the engineers here. However, the first
> thing is to get the driver closer aligned to the one that Sys.LSI have
> been shipping, which means getting some missing features sorted out.
>
> By the way, which is the FIMC block? I've not seen any documentation
> referencing this as an block in the SoC.
FIMC is a camera interface block. It can output video stream directly to
display controller FIFO.
--
Yauhen Kharuzhy jekhor _at_ gmail.com
JID: jek at jabber.ru
A: No
Q: Should I quote below my post?
next prev parent reply other threads:[~2010-05-19 6:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-18 10:54 s3c-fb updates Ben Dooks
2010-05-18 10:54 ` Ben Dooks
2010-05-18 10:54 ` [PATCH 1/5] s3c-fb: Change to depending on CONFIG_S3C_FB_DEV Ben Dooks
2010-05-18 10:54 ` Ben Dooks
2010-05-18 10:54 ` [PATCH 2/5] s3c-fb: only init window colour key controls for windows with blending Ben Dooks
2010-05-18 10:54 ` Ben Dooks
2010-05-18 10:54 ` [PATCH 3/5] s3c-fb: Initial move to unifying the header files Ben Dooks
2010-05-18 10:54 ` Ben Dooks
2010-05-18 10:54 ` [PATCH 4/5] s3c-fb: udpate to support s3c2416/s3c2443 style hardware Ben Dooks
2010-05-18 10:54 ` Ben Dooks
2010-05-18 10:54 ` [PATCH 5/5] s3c-fb: Integrate palette setup code into main driver Ben Dooks
2010-05-18 10:54 ` Ben Dooks
2010-05-18 14:35 ` s3c-fb updates Kyungmin Park
2010-05-18 14:35 ` Kyungmin Park
2010-05-19 0:45 ` Ben Dooks
2010-05-19 0:45 ` Ben Dooks
2010-05-19 1:53 ` InKi Dae
2010-05-19 1:53 ` InKi Dae
2010-05-19 1:57 ` Ben Dooks
2010-05-19 1:57 ` Ben Dooks
2010-05-19 6:25 ` Yauhen Kharuzhy [this message]
2010-05-19 6:25 ` Yauhen Kharuzhy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100519062501.GA1429@jeknote.loshitsa1.net \
--to=jekhor@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.