* [patch] md/raid10: check for ERR_PTR returns from setup_conf()
@ 2010-05-25 9:40 ` Dan Carpenter
0 siblings, 0 replies; 4+ messages in thread
From: Dan Carpenter @ 2010-05-25 9:40 UTC (permalink / raw)
To: Neil Brown
Cc: Andre Noll, Robert Becker, Martin K. Petersen, Jens Axboe,
linux-raid, kernel-janitors
setup_conf() can return error values so I added a check for that here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 0372499..8bd7da2 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2454,6 +2454,8 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
mddev->recovery_cp = MaxSector;
conf = setup_conf(mddev);
+ if (IS_ERR(conf))
+ return conf;
conf->scale_disks = 2;
return conf;
}
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [patch] md/raid10: check for ERR_PTR returns from setup_conf()
@ 2010-05-25 9:40 ` Dan Carpenter
0 siblings, 0 replies; 4+ messages in thread
From: Dan Carpenter @ 2010-05-25 9:40 UTC (permalink / raw)
To: Neil Brown
Cc: Andre Noll, Robert Becker, Martin K. Petersen, Jens Axboe,
linux-raid, kernel-janitors
setup_conf() can return error values so I added a check for that here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 0372499..8bd7da2 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2454,6 +2454,8 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
mddev->recovery_cp = MaxSector;
conf = setup_conf(mddev);
+ if (IS_ERR(conf))
+ return conf;
conf->scale_disks = 2;
return conf;
}
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [patch] md/raid10: check for ERR_PTR returns from setup_conf()
2010-05-25 9:40 ` Dan Carpenter
@ 2010-05-25 14:56 ` Andre Noll
-1 siblings, 0 replies; 4+ messages in thread
From: Andre Noll @ 2010-05-25 14:56 UTC (permalink / raw)
To: Dan Carpenter
Cc: Neil Brown, Robert Becker, Martin K. Petersen, Jens Axboe,
linux-raid, kernel-janitors
[-- Attachment #1: Type: text/plain, Size: 1062 bytes --]
On 11:40, Dan Carpenter wrote:
> setup_conf() can return error values so I added a check for that here.
>
> Signed-off-by: Dan Carpenter <error27@gmail.com>
>
> diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
> index 0372499..8bd7da2 100644
> --- a/drivers/md/raid10.c
> +++ b/drivers/md/raid10.c
> @@ -2454,6 +2454,8 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
> mddev->recovery_cp = MaxSector;
>
> conf = setup_conf(mddev);
> + if (IS_ERR(conf))
> + return conf;
> conf->scale_disks = 2;
> return conf;
> }
Looks good. Feel free to add my Acked-By.
BTW: setup_conf() could use some cleanup: The "couldn't allocate
memory" error message at the bottom is misleading, and the function
returns ERR_PTR(-ENOMEM) also if md_register_thread() fails.
Here's a question for Neil: raid10_takeover_raid0() sets
mddev->new_layout, but setup_conf() uses the old values of the
raid0. How is this supposed to work?
Thanks
Andre
--
The only person who always got his work done by Friday was Robinson Crusoe
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [patch] md/raid10: check for ERR_PTR returns from setup_conf()
@ 2010-05-25 14:56 ` Andre Noll
0 siblings, 0 replies; 4+ messages in thread
From: Andre Noll @ 2010-05-25 14:56 UTC (permalink / raw)
To: Dan Carpenter
Cc: Neil Brown, Robert Becker, Martin K. Petersen, Jens Axboe,
linux-raid, kernel-janitors
[-- Attachment #1: Type: text/plain, Size: 1062 bytes --]
On 11:40, Dan Carpenter wrote:
> setup_conf() can return error values so I added a check for that here.
>
> Signed-off-by: Dan Carpenter <error27@gmail.com>
>
> diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
> index 0372499..8bd7da2 100644
> --- a/drivers/md/raid10.c
> +++ b/drivers/md/raid10.c
> @@ -2454,6 +2454,8 @@ static void *raid10_takeover_raid0(mddev_t *mddev)
> mddev->recovery_cp = MaxSector;
>
> conf = setup_conf(mddev);
> + if (IS_ERR(conf))
> + return conf;
> conf->scale_disks = 2;
> return conf;
> }
Looks good. Feel free to add my Acked-By.
BTW: setup_conf() could use some cleanup: The "couldn't allocate
memory" error message at the bottom is misleading, and the function
returns ERR_PTR(-ENOMEM) also if md_register_thread() fails.
Here's a question for Neil: raid10_takeover_raid0() sets
mddev->new_layout, but setup_conf() uses the old values of the
raid0. How is this supposed to work?
Thanks
Andre
--
The only person who always got his work done by Friday was Robinson Crusoe
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-05-25 14:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-25 9:40 [patch] md/raid10: check for ERR_PTR returns from setup_conf() Dan Carpenter
2010-05-25 9:40 ` Dan Carpenter
2010-05-25 14:56 ` Andre Noll
2010-05-25 14:56 ` Andre Noll
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.