Colibri/PXA270 patchset

Colibri/PXA270 patchset

[Marek Vasut]

This is composed by Daniel Mack and me.

This patchset refactors the colibri/pxa270 board and adds support for Income
SBC. Besides the colibri/pxa270 is made modular.

I'm unsure what's already in, but none of this should be.

[PATCH 1/8] pxa/colibri270: Refactor board definition file

[Marek Vasut]

This patch just moves code around and polishes it. Also, compile in only
selected pieces of hardware.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa270.c       |   69 ++++++++++++++++++------------
 arch/arm/mach-pxa/include/mach/colibri.h |    9 +---
 2 files changed, 43 insertions(+), 35 deletions(-)

diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 061c453..4519e89 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -3,6 +3,7 @@
  *
  *  Support for Toradex PXA270 based Colibri module
  *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -36,23 +37,25 @@
 #include "generic.h"
 #include "devices.h"
 
-/*
- * GPIO configuration
- */
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+	/* Ethernet */
 	GPIO78_nCS_2,	/* Ethernet CS */
 	GPIO114_GPIO,	/* Ethernet IRQ */
 };
 
-/*
- * NOR flash
- */
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition colibri_partitions[] = {
 	{
 		.name =		"Bootloader",
 		.offset =	0x00000000,
 		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
 	}, {
 		.name =		"Kernel",
 		.offset =	0x00040000,
@@ -90,42 +93,50 @@ static struct platform_device colibri_pxa270_flash_device = {
 	.num_resources = 1,
 };
 
-/*
- * DM9000 Ethernet
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
+static void __init colibri_pxa270_nor_init(void)
+{
+	platform_device_register(&colibri_pxa270_flash);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
 	[0] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 3,
+		.start	= PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 3,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS + 4,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+		.start	= PXA_CS2_PHYS + 4,
+		.end	= PXA_CS2_PHYS + 4 + 500,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
-		.start	= COLIBRI_PXA270_ETH_IRQ,
-		.end	= COLIBRI_PXA270_ETH_IRQ,
+		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
-static struct platform_device dm9000_device = {
+static struct platform_device colibri_pxa270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
+	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+	.resource	= colibri_pxa270_dm9000_resources,
 };
-#endif /* CONFIG_DM9000 */
 
-static struct platform_device *colibri_pxa270_devices[] __initdata = {
-	&colibri_pxa270_flash_device,
-#if defined(CONFIG_DM9000)
-	&dm9000_device,
+static void __init colibri_pxa270_eth_init(void)
+{
+	platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
 #endif
-};
 
 static void __init colibri_pxa270_init(void)
 {
@@ -133,7 +144,9 @@ static void __init colibri_pxa270_init(void)
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
-	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+
+	colibri_pxa270_nor_init();
+	colibri_pxa270_eth_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 5f2ba8d..9e47e1f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -33,13 +33,8 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-/* definitions for Colibri PXA270 */
-
-#define COLIBRI_PXA270_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_PXA270_ETH_PHYS		(PXA_CS2_PHYS)  /* Ethernet */
-#define COLIBRI_PXA270_ETH_IRQ_GPIO	114
-#define COLIBRI_PXA270_ETH_IRQ		\
-	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
 
 #endif /* _COLIBRI_H_ */
 
-- 
1.7.0

[PATCH 1/8] pxa/colibri270: Refactor board definition file

[Eric Miao]

On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> This patch just moves code around and polishes it. Also, compile in only
> selected pieces of hardware.
>
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Applied.

> ---
> ?arch/arm/mach-pxa/colibri-pxa270.c ? ? ? | ? 69 ++++++++++++++++++------------
> ?arch/arm/mach-pxa/include/mach/colibri.h | ? ?9 +---
> ?2 files changed, 43 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 061c453..4519e89 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -3,6 +3,7 @@
> ?*
> ?* ?Support for Toradex PXA270 based Colibri module
> ?* ?Daniel Mack <daniel@caiaq.de>
> + * ?Marek Vasut <marek.vasut@gmail.com>
> ?*
> ?* ?This program is free software; you can redistribute it and/or modify
> ?* ?it under the terms of the GNU General Public License version 2 as
> @@ -36,23 +37,25 @@
> ?#include "generic.h"
> ?#include "devices.h"
>
> -/*
> - * GPIO configuration
> - */
> +/******************************************************************************
> + * Pin configuration
> + ******************************************************************************/
> ?static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
> + ? ? ? /* Ethernet */
> ? ? ? ?GPIO78_nCS_2, ? /* Ethernet CS */
> ? ? ? ?GPIO114_GPIO, ? /* Ethernet IRQ */
> ?};
>
> -/*
> - * NOR flash
> - */
> +/******************************************************************************
> + * NOR Flash
> + ******************************************************************************/
> +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
> ?static struct mtd_partition colibri_partitions[] = {
> ? ? ? ?{
> ? ? ? ? ? ? ? ?.name = ? ? ? ? "Bootloader",
> ? ? ? ? ? ? ? ?.offset = ? ? ? 0x00000000,
> ? ? ? ? ? ? ? ?.size = ? ? ? ? 0x00040000,
> - ? ? ? ? ? ? ? .mask_flags = ? MTD_WRITEABLE ?/* force read-only */
> + ? ? ? ? ? ? ? .mask_flags = ? MTD_WRITEABLE ? /* force read-only */
> ? ? ? ?}, {
> ? ? ? ? ? ? ? ?.name = ? ? ? ? "Kernel",
> ? ? ? ? ? ? ? ?.offset = ? ? ? 0x00040000,
> @@ -90,42 +93,50 @@ static struct platform_device colibri_pxa270_flash_device = {
> ? ? ? ?.num_resources = 1,
> ?};
>
> -/*
> - * DM9000 Ethernet
> - */
> -#if defined(CONFIG_DM9000)
> -static struct resource dm9000_resources[] = {
> +static void __init colibri_pxa270_nor_init(void)
> +{
> + ? ? ? platform_device_register(&colibri_pxa270_flash);
> +}
> +#else
> +static inline void colibri_pxa270_nor_init(void) {}
> +#endif
> +
> +/******************************************************************************
> + * Ethernet
> + ******************************************************************************/
> +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
> +static struct resource colibri_pxa270_dm9000_resources[] = {
> ? ? ? ?[0] = {
> - ? ? ? ? ? ? ? .start ?= COLIBRI_PXA270_ETH_PHYS,
> - ? ? ? ? ? ? ? .end ? ?= COLIBRI_PXA270_ETH_PHYS + 3,
> + ? ? ? ? ? ? ? .start ?= PXA_CS2_PHYS,
> + ? ? ? ? ? ? ? .end ? ?= PXA_CS2_PHYS + 3,
> ? ? ? ? ? ? ? ?.flags ?= IORESOURCE_MEM,
> ? ? ? ?},
> ? ? ? ?[1] = {
> - ? ? ? ? ? ? ? .start ?= COLIBRI_PXA270_ETH_PHYS + 4,
> - ? ? ? ? ? ? ? .end ? ?= COLIBRI_PXA270_ETH_PHYS + 4 + 500,
> + ? ? ? ? ? ? ? .start ?= PXA_CS2_PHYS + 4,
> + ? ? ? ? ? ? ? .end ? ?= PXA_CS2_PHYS + 4 + 500,
> ? ? ? ? ? ? ? ?.flags ?= IORESOURCE_MEM,
> ? ? ? ?},
> ? ? ? ?[2] = {
> - ? ? ? ? ? ? ? .start ?= COLIBRI_PXA270_ETH_IRQ,
> - ? ? ? ? ? ? ? .end ? ?= COLIBRI_PXA270_ETH_IRQ,
> + ? ? ? ? ? ? ? .start ?= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
> + ? ? ? ? ? ? ? .end ? ?= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
> ? ? ? ? ? ? ? ?.flags ?= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
> ? ? ? ?},
> ?};
>
> -static struct platform_device dm9000_device = {
> +static struct platform_device colibri_pxa270_dm9000_device = {
> ? ? ? ?.name ? ? ? ? ? = "dm9000",
> ? ? ? ?.id ? ? ? ? ? ? = -1,
> - ? ? ? .num_resources ?= ARRAY_SIZE(dm9000_resources),
> - ? ? ? .resource ? ? ? = dm9000_resources,
> + ? ? ? .num_resources ?= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
> + ? ? ? .resource ? ? ? = colibri_pxa270_dm9000_resources,
> ?};
> -#endif /* CONFIG_DM9000 */
>
> -static struct platform_device *colibri_pxa270_devices[] __initdata = {
> - ? ? ? &colibri_pxa270_flash_device,
> -#if defined(CONFIG_DM9000)
> - ? ? ? &dm9000_device,
> +static void __init colibri_pxa270_eth_init(void)
> +{
> + ? ? ? platform_device_register(&colibri_pxa270_dm9000_device);
> +}
> +#else
> +static inline void colibri_pxa270_eth_init(void) {}
> ?#endif
> -};
>
> ?static void __init colibri_pxa270_init(void)
> ?{
> @@ -133,7 +144,9 @@ static void __init colibri_pxa270_init(void)
> ? ? ? ?pxa_set_ffuart_info(NULL);
> ? ? ? ?pxa_set_btuart_info(NULL);
> ? ? ? ?pxa_set_stuart_info(NULL);
> - ? ? ? platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
> +
> + ? ? ? colibri_pxa270_nor_init();
> + ? ? ? colibri_pxa270_eth_init();
> ?}
>
> ?MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
> index 5f2ba8d..9e47e1f 100644
> --- a/arch/arm/mach-pxa/include/mach/colibri.h
> +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> @@ -33,13 +33,8 @@ static inline void colibri_pxa3xx_init_nand(void) {}
> ?/* physical memory regions */
> ?#define COLIBRI_SDRAM_BASE ? ? 0xa0000000 ? ? ?/* SDRAM region */
>
> -/* definitions for Colibri PXA270 */
> -
> -#define COLIBRI_PXA270_FLASH_PHYS ? ? ?(PXA_CS0_PHYS) ?/* Flash region */
> -#define COLIBRI_PXA270_ETH_PHYS ? ? ? ? ? ? ? ?(PXA_CS2_PHYS) ?/* Ethernet */
> -#define COLIBRI_PXA270_ETH_IRQ_GPIO ? ?114
> -#define COLIBRI_PXA270_ETH_IRQ ? ? ? ? \
> - ? ? ? gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
> +/* GPIO definitions for Colibri PXA270 */
> +#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
>
> ?#endif /* _COLIBRI_H_ */
>
> --
> 1.7.0
>
>

[PATCH 2/8] pxa/colibri270: Add MMC support

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa270.c       |   31 ++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h |    1 +
 2 files changed, 32 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 4519e89..5490c5f 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -33,6 +33,7 @@
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -44,6 +45,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 	/* Ethernet */
 	GPIO78_nCS_2,	/* Ethernet CS */
 	GPIO114_GPIO,	/* Ethernet IRQ */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
 };
 
 /******************************************************************************
@@ -138,6 +148,26 @@ static void __init colibri_pxa270_eth_init(void)
 static inline void colibri_pxa270_eth_init(void) {}
 #endif
 
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
+	.gpio_card_ro		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
@@ -147,6 +177,7 @@ static void __init colibri_pxa270_init(void)
 
 	colibri_pxa270_nor_init();
 	colibri_pxa270_eth_init();
+	colibri_pxa270_mmc_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 9e47e1f..c549236 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -35,6 +35,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 
 /* GPIO definitions for Colibri PXA270 */
 #define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
 
 #endif /* _COLIBRI_H_ */
 
-- 
1.7.0

[PATCH 2/8] pxa/colibri270: Add MMC support

[Eric Miao]

On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Applied.

> ---
> ?arch/arm/mach-pxa/colibri-pxa270.c ? ? ? | ? 31 ++++++++++++++++++++++++++++++
> ?arch/arm/mach-pxa/include/mach/colibri.h | ? ?1 +
> ?2 files changed, 32 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 4519e89..5490c5f 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -33,6 +33,7 @@
>
> ?#include <mach/pxa27x.h>
> ?#include <mach/colibri.h>
> +#include <mach/mmc.h>
>
> ?#include "generic.h"
> ?#include "devices.h"
> @@ -44,6 +45,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
> ? ? ? ?/* Ethernet */
> ? ? ? ?GPIO78_nCS_2, ? /* Ethernet CS */
> ? ? ? ?GPIO114_GPIO, ? /* Ethernet IRQ */
> +
> + ? ? ? /* MMC */
> + ? ? ? GPIO32_MMC_CLK,
> + ? ? ? GPIO92_MMC_DAT_0,
> + ? ? ? GPIO109_MMC_DAT_1,
> + ? ? ? GPIO110_MMC_DAT_2,
> + ? ? ? GPIO111_MMC_DAT_3,
> + ? ? ? GPIO112_MMC_CMD,
> + ? ? ? GPIO0_GPIO, ? ? /* SD detect */
> ?};
>
> ?/******************************************************************************
> @@ -138,6 +148,26 @@ static void __init colibri_pxa270_eth_init(void)
> ?static inline void colibri_pxa270_eth_init(void) {}
> ?#endif
>
> +/******************************************************************************
> + * SD/MMC card controller
> + ******************************************************************************/
> +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
> +static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
> + ? ? ? .ocr_mask ? ? ? ? ? ? ? = MMC_VDD_32_33 | MMC_VDD_33_34,
> + ? ? ? .gpio_power ? ? ? ? ? ? = -1,
> + ? ? ? .gpio_card_detect ? ? ? = GPIO0_COLIBRI_PXA270_SD_DETECT,
> + ? ? ? .gpio_card_ro ? ? ? ? ? = -1,
> + ? ? ? .detect_delay_ms ? ? ? ?= 200,
> +};
> +
> +static void __init colibri_pxa270_mmc_init(void)
> +{
> + ? ? ? pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
> +}
> +#else
> +static inline void colibri_pxa270_mmc_init(void) {}
> +#endif
> +
> ?static void __init colibri_pxa270_init(void)
> ?{
> ? ? ? ?pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
> @@ -147,6 +177,7 @@ static void __init colibri_pxa270_init(void)
>
> ? ? ? ?colibri_pxa270_nor_init();
> ? ? ? ?colibri_pxa270_eth_init();
> + ? ? ? colibri_pxa270_mmc_init();
> ?}
>
> ?MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
> index 9e47e1f..c549236 100644
> --- a/arch/arm/mach-pxa/include/mach/colibri.h
> +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> @@ -35,6 +35,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
>
> ?/* GPIO definitions for Colibri PXA270 */
> ?#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
> +#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
>
> ?#endif /* _COLIBRI_H_ */
>
> --
> 1.7.0
>
>

[PATCH 3/8] pxa/colibri270: Add FFUART MFP

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa270.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 5490c5f..18b208a 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -54,6 +54,10 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
 	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
 };
 
 /******************************************************************************
-- 
1.7.0

[PATCH 3/8] pxa/colibri270: Add FFUART MFP

[Eric Miao]

On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Applied.

> ---
> ?arch/arm/mach-pxa/colibri-pxa270.c | ? ?4 ++++
> ?1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 5490c5f..18b208a 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -54,6 +54,10 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
> ? ? ? ?GPIO111_MMC_DAT_3,
> ? ? ? ?GPIO112_MMC_CMD,
> ? ? ? ?GPIO0_GPIO, ? ? /* SD detect */
> +
> + ? ? ? /* FFUART */
> + ? ? ? GPIO39_FFUART_TXD,
> + ? ? ? GPIO34_FFUART_RXD,
> ?};
>
> ?/******************************************************************************
> --
> 1.7.0
>
>

[PATCH 4/8] pxa/colibri270: Add UHC support

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa270.c |   34 ++++++++++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 18b208a..1cbeb61 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -34,6 +34,8 @@
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
 #include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -58,6 +60,12 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 	/* FFUART */
 	GPIO39_FFUART_TXD,
 	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
 };
 
 /******************************************************************************
@@ -172,6 +180,31 @@ static void __init colibri_pxa270_mmc_init(void)
 static inline void colibri_pxa270_mmc_init(void) {}
 #endif
 
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+	return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
@@ -182,6 +215,7 @@ static void __init colibri_pxa270_init(void)
 	colibri_pxa270_nor_init();
 	colibri_pxa270_eth_init();
 	colibri_pxa270_mmc_init();
+	colibri_pxa270_uhc_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-- 
1.7.0

[PATCH 4/8] pxa/colibri270: Add UHC support

[Eric Miao]

On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Applied.

> ---
> ?arch/arm/mach-pxa/colibri-pxa270.c | ? 34 ++++++++++++++++++++++++++++++++++
> ?1 files changed, 34 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 18b208a..1cbeb61 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -34,6 +34,8 @@
> ?#include <mach/pxa27x.h>
> ?#include <mach/colibri.h>
> ?#include <mach/mmc.h>
> +#include <mach/ohci.h>
> +#include <mach/pxa27x-udc.h>
>
> ?#include "generic.h"
> ?#include "devices.h"
> @@ -58,6 +60,12 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
> ? ? ? ?/* FFUART */
> ? ? ? ?GPIO39_FFUART_TXD,
> ? ? ? ?GPIO34_FFUART_RXD,
> +
> + ? ? ? /* UHC */
> + ? ? ? GPIO88_USBH1_PWR,
> + ? ? ? GPIO89_USBH1_PEN,
> + ? ? ? GPIO119_USBH2_PWR,
> + ? ? ? GPIO120_USBH2_PEN,
> ?};
>
> ?/******************************************************************************
> @@ -172,6 +180,31 @@ static void __init colibri_pxa270_mmc_init(void)
> ?static inline void colibri_pxa270_mmc_init(void) {}
> ?#endif
>
> +/******************************************************************************
> + * USB Host
> + ******************************************************************************/
> +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
> +static int colibri_pxa270_ohci_init(struct device *dev)
> +{
> + ? ? ? UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
> + ? ? ? return 0;
> +}
> +
> +static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
> + ? ? ? .port_mode ? ? ?= PMM_PERPORT_MODE,
> + ? ? ? .flags ? ? ? ? ?= ENABLE_PORT1 | ENABLE_PORT2 |
> + ? ? ? ? ? ? ? ? ? ? ? POWER_CONTROL_LOW | POWER_SENSE_LOW,
> + ? ? ? .init ? ? ? ? ? = colibri_pxa270_ohci_init,
> +};
> +
> +static void __init colibri_pxa270_uhc_init(void)
> +{
> + ? ? ? pxa_set_ohci_info(&colibri_pxa270_ohci_info);
> +}
> +#else
> +static inline void colibri_pxa270_uhc_init(void) {}
> +#endif
> +
> ?static void __init colibri_pxa270_init(void)
> ?{
> ? ? ? ?pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
> @@ -182,6 +215,7 @@ static void __init colibri_pxa270_init(void)
> ? ? ? ?colibri_pxa270_nor_init();
> ? ? ? ?colibri_pxa270_eth_init();
> ? ? ? ?colibri_pxa270_mmc_init();
> + ? ? ? colibri_pxa270_uhc_init();
> ?}
>
> ?MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
> --
> 1.7.0
>
>

[PATCH 5/8] pxa/colibri270: Add TSC support

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa270.c       |   42 ++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h |    1 +
 2 files changed, 43 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 1cbeb61..6e0d623 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
+#include <linux/ucb1400.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -31,6 +32,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
+#include <mach/audio.h>
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
 #include <mach/mmc.h>
@@ -66,6 +68,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 	GPIO89_USBH1_PEN,
 	GPIO119_USBH2_PWR,
 	GPIO120_USBH2_PEN,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
 };
 
 /******************************************************************************
@@ -205,6 +216,36 @@ static void __init colibri_pxa270_uhc_init(void)
 static inline void colibri_pxa270_uhc_init(void) {}
 #endif
 
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &colibri_pxa270_ucb1400_pdata,
+	},
+};
+
+static void __init colibri_pxa270_tsc_init(void)
+{
+	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+	platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
@@ -216,6 +257,7 @@ static void __init colibri_pxa270_init(void)
 	colibri_pxa270_eth_init();
 	colibri_pxa270_mmc_init();
 	colibri_pxa270_uhc_init();
+	colibri_pxa270_tsc_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index c549236..8579b10 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -36,6 +36,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 /* GPIO definitions for Colibri PXA270 */
 #define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
 #define GPIO0_COLIBRI_PXA270_SD_DETECT	0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
 #endif /* _COLIBRI_H_ */
 
-- 
1.7.0

[PATCH 5/8] pxa/colibri270: Add TSC support

[Eric Miao]

On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Applied.

> ---
> ?arch/arm/mach-pxa/colibri-pxa270.c ? ? ? | ? 42 ++++++++++++++++++++++++++++++
> ?arch/arm/mach-pxa/include/mach/colibri.h | ? ?1 +
> ?2 files changed, 43 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 1cbeb61..6e0d623 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -22,6 +22,7 @@
> ?#include <linux/mtd/partitions.h>
> ?#include <linux/mtd/physmap.h>
> ?#include <linux/gpio.h>
> +#include <linux/ucb1400.h>
> ?#include <asm/mach-types.h>
> ?#include <mach/hardware.h>
> ?#include <asm/irq.h>
> @@ -31,6 +32,7 @@
> ?#include <asm/mach/irq.h>
> ?#include <asm/mach/flash.h>
>
> +#include <mach/audio.h>
> ?#include <mach/pxa27x.h>
> ?#include <mach/colibri.h>
> ?#include <mach/mmc.h>
> @@ -66,6 +68,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
> ? ? ? ?GPIO89_USBH1_PEN,
> ? ? ? ?GPIO119_USBH2_PWR,
> ? ? ? ?GPIO120_USBH2_PEN,
> +
> + ? ? ? /* AC97 */
> + ? ? ? GPIO28_AC97_BITCLK,
> + ? ? ? GPIO29_AC97_SDATA_IN_0,
> + ? ? ? GPIO30_AC97_SDATA_OUT,
> + ? ? ? GPIO31_AC97_SYNC,
> + ? ? ? GPIO95_AC97_nRESET,
> + ? ? ? GPIO98_AC97_SYSCLK,
> + ? ? ? GPIO113_GPIO, ? /* Touchscreen IRQ */
> ?};
>
> ?/******************************************************************************
> @@ -205,6 +216,36 @@ static void __init colibri_pxa270_uhc_init(void)
> ?static inline void colibri_pxa270_uhc_init(void) {}
> ?#endif
>
> +/******************************************************************************
> + * Audio and Touchscreen
> + ******************************************************************************/
> +#if ? ?defined(CONFIG_TOUCHSCREEN_UCB1400) || \
> + ? ? ? defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
> +static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
> + ? ? ? .reset_gpio ? ? = 95,
> +};
> +
> +static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
> + ? ? ? .irq ? ? ? ? ? ?= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
> +};
> +
> +static struct platform_device colibri_pxa270_ucb1400_device = {
> + ? ? ? .name ? ? ? ? ? = "ucb1400_core",
> + ? ? ? .id ? ? ? ? ? ? = -1,
> + ? ? ? .dev ? ? ? ? ? ?= {
> + ? ? ? ? ? ? ? .platform_data = &colibri_pxa270_ucb1400_pdata,
> + ? ? ? },
> +};
> +
> +static void __init colibri_pxa270_tsc_init(void)
> +{
> + ? ? ? pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
> + ? ? ? platform_device_register(&colibri_pxa270_ucb1400_device);
> +}
> +#else
> +static inline void colibri_pxa270_tsc_init(void) {}
> +#endif
> +
> ?static void __init colibri_pxa270_init(void)
> ?{
> ? ? ? ?pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
> @@ -216,6 +257,7 @@ static void __init colibri_pxa270_init(void)
> ? ? ? ?colibri_pxa270_eth_init();
> ? ? ? ?colibri_pxa270_mmc_init();
> ? ? ? ?colibri_pxa270_uhc_init();
> + ? ? ? colibri_pxa270_tsc_init();
> ?}
>
> ?MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
> index c549236..8579b10 100644
> --- a/arch/arm/mach-pxa/include/mach/colibri.h
> +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> @@ -36,6 +36,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
> ?/* GPIO definitions for Colibri PXA270 */
> ?#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
> ?#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
> +#define GPIO113_COLIBRI_PXA270_TS_IRQ ?113
>
> ?#endif /* _COLIBRI_H_ */
>
> --
> 1.7.0
>
>

[PATCH 6/8] ARM: pxa/colibri-pxa270: split module and base board code

[Marek Vasut]

From: Daniel Mack <daniel@caiaq.de>

Follow the idea of several MX31 based boards and split code that is
related to the module from code that is baseboard specific. This makes
adding new base board support easier, while avoiding code duplication.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig                    |    4 +
 arch/arm/mach-pxa/Makefile                   |    3 +-
 arch/arm/mach-pxa/colibri-pxa270-evalboard.c |  111 ++++++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa270.c           |  107 +++++--------------------
 arch/arm/mach-pxa/include/mach/colibri.h     |   14 +++
 5 files changed, 151 insertions(+), 88 deletions(-)
 create mode 100644 arch/arm/mach-pxa/colibri-pxa270-evalboard.c

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3b51741..819b44f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -238,6 +238,10 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
+config MACH_COLIBRI_PXA270_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
+	depends on MACH_COLIBRI
+
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index b8f1f4b..4751c9d 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -58,7 +58,8 @@ obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
 obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
new file mode 100644
index 0000000..0f3b632
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *
+ *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
+	.gpio_card_ro		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+	return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
+void __init colibri_pxa270_evalboard_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	colibri_pxa270_mmc_init();
+	colibri_pxa270_uhc_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 6e0d623..c1b8880 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -11,36 +11,26 @@
  */
 
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
+#include <linux/kernel.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
 #include <linux/ucb1400.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
+
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
 
 #include <mach/audio.h>
-#include <mach/pxa27x.h>
 #include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
+#include <mach/pxa27x.h>
 
-#include "generic.h"
 #include "devices.h"
+#include "generic.h"
 
 /******************************************************************************
  * Pin configuration
@@ -50,25 +40,6 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 	GPIO78_nCS_2,	/* Ethernet CS */
 	GPIO114_GPIO,	/* Ethernet IRQ */
 
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
 	/* AC97 */
 	GPIO28_AC97_BITCLK,
 	GPIO29_AC97_SDATA_IN_0,
@@ -172,51 +143,6 @@ static inline void colibri_pxa270_eth_init(void) {}
 #endif
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
-	.gpio_card_ro		= -1,
-	.detect_delay_ms	= 200,
-};
-
-static void __init colibri_pxa270_mmc_init(void)
-{
-	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
-}
-#else
-static inline void colibri_pxa270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_pxa270_ohci_init,
-};
-
-static void __init colibri_pxa270_uhc_init(void)
-{
-	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
-}
-#else
-static inline void colibri_pxa270_uhc_init(void) {}
-#endif
-
-/******************************************************************************
  * Audio and Touchscreen
  ******************************************************************************/
 #if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
@@ -246,18 +172,25 @@ static void __init colibri_pxa270_tsc_init(void)
 static inline void colibri_pxa270_tsc_init(void) {}
 #endif
 
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
 
 	colibri_pxa270_nor_init();
 	colibri_pxa270_eth_init();
-	colibri_pxa270_mmc_init();
-	colibri_pxa270_uhc_init();
 	colibri_pxa270_tsc_init();
+
+	switch (colibri_pxa270_baseboard) {
+	case COLIBRI_PXA270_EVALBOARD:
+		colibri_pxa270_evalboard_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+				colibri_pxa270_baseboard);
+	}
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 8579b10..6434f66 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -5,6 +5,20 @@
 #include <mach/mfp.h>
 
 /*
+ * base board glue for PXA270 module
+ */
+
+enum {
+	COLIBRI_PXA270_EVALBOARD = 0,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
+extern void colibri_pxa270_evalboard_init(void);
+#else
+static inline void colibri_pxa270_evalboard_init(void) {}
+#endif
+
+/*
  * common settings for all modules
  */
 
-- 
1.7.0

[PATCH 6/8] ARM: pxa/colibri-pxa270: split module and base board code

[Eric Miao]

On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> From: Daniel Mack <daniel@caiaq.de>
>
> Follow the idea of several MX31 based boards and split code that is
> related to the module from code that is baseboard specific. This makes
> adding new base board support easier, while avoiding code duplication.
>
> Signed-off-by: Daniel Mack <daniel@caiaq.de>
> Acked-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Eric Miao <eric.y.miao@gmail.com>

Applied.

> ---
> ?arch/arm/mach-pxa/Kconfig ? ? ? ? ? ? ? ? ? ?| ? ?4 +
> ?arch/arm/mach-pxa/Makefile ? ? ? ? ? ? ? ? ? | ? ?3 +-
> ?arch/arm/mach-pxa/colibri-pxa270-evalboard.c | ?111 ++++++++++++++++++++++++++
> ?arch/arm/mach-pxa/colibri-pxa270.c ? ? ? ? ? | ?107 +++++--------------------
> ?arch/arm/mach-pxa/include/mach/colibri.h ? ? | ? 14 +++
> ?5 files changed, 151 insertions(+), 88 deletions(-)
> ?create mode 100644 arch/arm/mach-pxa/colibri-pxa270-evalboard.c
>
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 3b51741..819b44f 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -238,6 +238,10 @@ config MACH_COLIBRI
> ? ? ? ?bool "Toradex Colibri PXA270"
> ? ? ? ?select PXA27x
>
> +config MACH_COLIBRI_PXA270_EVALBOARD
> + ? ? ? bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
> + ? ? ? depends on MACH_COLIBRI
> +
> ?config MACH_COLIBRI300
> ? ? ? ?bool "Toradex Colibri PXA300/310"
> ? ? ? ?select PXA3xx
> diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
> index b8f1f4b..4751c9d 100644
> --- a/arch/arm/mach-pxa/Makefile
> +++ b/arch/arm/mach-pxa/Makefile
> @@ -58,7 +58,8 @@ obj-$(CONFIG_MACH_TRIZEPS4) ? += trizeps4.o
> ?obj-$(CONFIG_MACH_LOGICPD_PXA270) ? ? ?+= lpd270.o
> ?obj-$(CONFIG_MACH_PCM027) ? ? ? ? ? ? ?+= pcm027.o
> ?obj-$(CONFIG_MACH_PCM990_BASEBOARD) ? ?+= pcm990-baseboard.o
> -obj-$(CONFIG_MACH_COLIBRI) ? ? += colibri-pxa270.o
> +obj-$(CONFIG_MACH_COLIBRI) ? ? ? ? ? ? ? ? ? ? += colibri-pxa270.o
> +obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) ? ?+= colibri-pxa270-evalboard.o
> ?obj-$(CONFIG_MACH_COLIBRI300) ?+= colibri-pxa3xx.o colibri-pxa300.o
> ?obj-$(CONFIG_MACH_COLIBRI320) ?+= colibri-pxa3xx.o colibri-pxa320.o
> ?obj-$(CONFIG_MACH_VPAC270) ? ? += vpac270.o
> diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> new file mode 100644
> index 0000000..0f3b632
> --- /dev/null
> +++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> @@ -0,0 +1,111 @@
> +/*
> + * ?linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> + *
> + * ?Support for Toradex PXA270 based Colibri Evaluation Carrier Board
> + * ?Daniel Mack <daniel@caiaq.de>
> + * ?Marek Vasut <marek.vasut@gmail.com>
> + *
> + * ?This program is free software; you can redistribute it and/or modify
> + * ?it under the terms of the GNU General Public License version 2 as
> + * ?published by the Free Software Foundation.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/sysdev.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <asm/mach-types.h>
> +#include <mach/hardware.h>
> +#include <asm/mach/arch.h>
> +
> +#include <mach/pxa27x.h>
> +#include <mach/colibri.h>
> +#include <mach/mmc.h>
> +#include <mach/ohci.h>
> +#include <mach/pxa27x-udc.h>
> +
> +#include "generic.h"
> +#include "devices.h"
> +
> +/******************************************************************************
> + * Pin configuration
> + ******************************************************************************/
> +static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
> + ? ? ? /* MMC */
> + ? ? ? GPIO32_MMC_CLK,
> + ? ? ? GPIO92_MMC_DAT_0,
> + ? ? ? GPIO109_MMC_DAT_1,
> + ? ? ? GPIO110_MMC_DAT_2,
> + ? ? ? GPIO111_MMC_DAT_3,
> + ? ? ? GPIO112_MMC_CMD,
> + ? ? ? GPIO0_GPIO, ? ? /* SD detect */
> +
> + ? ? ? /* FFUART */
> + ? ? ? GPIO39_FFUART_TXD,
> + ? ? ? GPIO34_FFUART_RXD,
> +
> + ? ? ? /* UHC */
> + ? ? ? GPIO88_USBH1_PWR,
> + ? ? ? GPIO89_USBH1_PEN,
> + ? ? ? GPIO119_USBH2_PWR,
> + ? ? ? GPIO120_USBH2_PEN,
> +};
> +
> +/******************************************************************************
> + * SD/MMC card controller
> + ******************************************************************************/
> +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
> +static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
> + ? ? ? .ocr_mask ? ? ? ? ? ? ? = MMC_VDD_32_33 | MMC_VDD_33_34,
> + ? ? ? .gpio_power ? ? ? ? ? ? = -1,
> + ? ? ? .gpio_card_detect ? ? ? = GPIO0_COLIBRI_PXA270_SD_DETECT,
> + ? ? ? .gpio_card_ro ? ? ? ? ? = -1,
> + ? ? ? .detect_delay_ms ? ? ? ?= 200,
> +};
> +
> +static void __init colibri_pxa270_mmc_init(void)
> +{
> + ? ? ? pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
> +}
> +#else
> +static inline void colibri_pxa270_mmc_init(void) {}
> +#endif
> +
> +/******************************************************************************
> + * USB Host
> + ******************************************************************************/
> +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
> +static int colibri_pxa270_ohci_init(struct device *dev)
> +{
> + ? ? ? UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
> + ? ? ? return 0;
> +}
> +
> +static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
> + ? ? ? .port_mode ? ? ?= PMM_PERPORT_MODE,
> + ? ? ? .flags ? ? ? ? ?= ENABLE_PORT1 | ENABLE_PORT2 |
> + ? ? ? ? ? ? ? ? ? ? ? ? POWER_CONTROL_LOW | POWER_SENSE_LOW,
> + ? ? ? .init ? ? ? ? ? = colibri_pxa270_ohci_init,
> +};
> +
> +static void __init colibri_pxa270_uhc_init(void)
> +{
> + ? ? ? pxa_set_ohci_info(&colibri_pxa270_ohci_info);
> +}
> +#else
> +static inline void colibri_pxa270_uhc_init(void) {}
> +#endif
> +
> +void __init colibri_pxa270_evalboard_init(void)
> +{
> + ? ? ? pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
> + ? ? ? pxa_set_ffuart_info(NULL);
> + ? ? ? pxa_set_btuart_info(NULL);
> + ? ? ? pxa_set_stuart_info(NULL);
> +
> + ? ? ? colibri_pxa270_mmc_init();
> + ? ? ? colibri_pxa270_uhc_init();
> +}
> +
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 6e0d623..c1b8880 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -11,36 +11,26 @@
> ?*/
>
> ?#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/platform_device.h>
> -#include <linux/sysdev.h>
> ?#include <linux/interrupt.h>
> -#include <linux/bitops.h>
> -#include <linux/ioport.h>
> -#include <linux/delay.h>
> +#include <linux/kernel.h>
> ?#include <linux/mtd/mtd.h>
> ?#include <linux/mtd/partitions.h>
> ?#include <linux/mtd/physmap.h>
> -#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/sysdev.h>
> ?#include <linux/ucb1400.h>
> -#include <asm/mach-types.h>
> -#include <mach/hardware.h>
> -#include <asm/irq.h>
> -#include <asm/sizes.h>
> +
> ?#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -#include <asm/mach/irq.h>
> ?#include <asm/mach/flash.h>
> +#include <asm/mach-types.h>
> +#include <asm/sizes.h>
>
> ?#include <mach/audio.h>
> -#include <mach/pxa27x.h>
> ?#include <mach/colibri.h>
> -#include <mach/mmc.h>
> -#include <mach/ohci.h>
> -#include <mach/pxa27x-udc.h>
> +#include <mach/pxa27x.h>
>
> -#include "generic.h"
> ?#include "devices.h"
> +#include "generic.h"
>
> ?/******************************************************************************
> ?* Pin configuration
> @@ -50,25 +40,6 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
> ? ? ? ?GPIO78_nCS_2, ? /* Ethernet CS */
> ? ? ? ?GPIO114_GPIO, ? /* Ethernet IRQ */
>
> - ? ? ? /* MMC */
> - ? ? ? GPIO32_MMC_CLK,
> - ? ? ? GPIO92_MMC_DAT_0,
> - ? ? ? GPIO109_MMC_DAT_1,
> - ? ? ? GPIO110_MMC_DAT_2,
> - ? ? ? GPIO111_MMC_DAT_3,
> - ? ? ? GPIO112_MMC_CMD,
> - ? ? ? GPIO0_GPIO, ? ? /* SD detect */
> -
> - ? ? ? /* FFUART */
> - ? ? ? GPIO39_FFUART_TXD,
> - ? ? ? GPIO34_FFUART_RXD,
> -
> - ? ? ? /* UHC */
> - ? ? ? GPIO88_USBH1_PWR,
> - ? ? ? GPIO89_USBH1_PEN,
> - ? ? ? GPIO119_USBH2_PWR,
> - ? ? ? GPIO120_USBH2_PEN,
> -
> ? ? ? ?/* AC97 */
> ? ? ? ?GPIO28_AC97_BITCLK,
> ? ? ? ?GPIO29_AC97_SDATA_IN_0,
> @@ -172,51 +143,6 @@ static inline void colibri_pxa270_eth_init(void) {}
> ?#endif
>
> ?/******************************************************************************
> - * SD/MMC card controller
> - ******************************************************************************/
> -#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
> -static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
> - ? ? ? .ocr_mask ? ? ? ? ? ? ? = MMC_VDD_32_33 | MMC_VDD_33_34,
> - ? ? ? .gpio_power ? ? ? ? ? ? = -1,
> - ? ? ? .gpio_card_detect ? ? ? = GPIO0_COLIBRI_PXA270_SD_DETECT,
> - ? ? ? .gpio_card_ro ? ? ? ? ? = -1,
> - ? ? ? .detect_delay_ms ? ? ? ?= 200,
> -};
> -
> -static void __init colibri_pxa270_mmc_init(void)
> -{
> - ? ? ? pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
> -}
> -#else
> -static inline void colibri_pxa270_mmc_init(void) {}
> -#endif
> -
> -/******************************************************************************
> - * USB Host
> - ******************************************************************************/
> -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
> -static int colibri_pxa270_ohci_init(struct device *dev)
> -{
> - ? ? ? UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
> - ? ? ? return 0;
> -}
> -
> -static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
> - ? ? ? .port_mode ? ? ?= PMM_PERPORT_MODE,
> - ? ? ? .flags ? ? ? ? ?= ENABLE_PORT1 | ENABLE_PORT2 |
> - ? ? ? ? ? ? ? ? ? ? ? POWER_CONTROL_LOW | POWER_SENSE_LOW,
> - ? ? ? .init ? ? ? ? ? = colibri_pxa270_ohci_init,
> -};
> -
> -static void __init colibri_pxa270_uhc_init(void)
> -{
> - ? ? ? pxa_set_ohci_info(&colibri_pxa270_ohci_info);
> -}
> -#else
> -static inline void colibri_pxa270_uhc_init(void) {}
> -#endif
> -
> -/******************************************************************************
> ?* Audio and Touchscreen
> ?******************************************************************************/
> ?#if ? ?defined(CONFIG_TOUCHSCREEN_UCB1400) || \
> @@ -246,18 +172,25 @@ static void __init colibri_pxa270_tsc_init(void)
> ?static inline void colibri_pxa270_tsc_init(void) {}
> ?#endif
>
> +static int colibri_pxa270_baseboard;
> +core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
> +
> ?static void __init colibri_pxa270_init(void)
> ?{
> ? ? ? ?pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
> - ? ? ? pxa_set_ffuart_info(NULL);
> - ? ? ? pxa_set_btuart_info(NULL);
> - ? ? ? pxa_set_stuart_info(NULL);
>
> ? ? ? ?colibri_pxa270_nor_init();
> ? ? ? ?colibri_pxa270_eth_init();
> - ? ? ? colibri_pxa270_mmc_init();
> - ? ? ? colibri_pxa270_uhc_init();
> ? ? ? ?colibri_pxa270_tsc_init();
> +
> + ? ? ? switch (colibri_pxa270_baseboard) {
> + ? ? ? case COLIBRI_PXA270_EVALBOARD:
> + ? ? ? ? ? ? ? colibri_pxa270_evalboard_init();
> + ? ? ? ? ? ? ? break;
> + ? ? ? default:
> + ? ? ? ? ? ? ? printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? colibri_pxa270_baseboard);
> + ? ? ? }
> ?}
>
> ?MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
> index 8579b10..6434f66 100644
> --- a/arch/arm/mach-pxa/include/mach/colibri.h
> +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> @@ -5,6 +5,20 @@
> ?#include <mach/mfp.h>
>
> ?/*
> + * base board glue for PXA270 module
> + */
> +
> +enum {
> + ? ? ? COLIBRI_PXA270_EVALBOARD = 0,
> +};
> +
> +#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
> +extern void colibri_pxa270_evalboard_init(void);
> +#else
> +static inline void colibri_pxa270_evalboard_init(void) {}
> +#endif
> +
> +/*
> ?* common settings for all modules
> ?*/
>
> --
> 1.7.0
>
>

[PATCH 7/8] pxa/income: Add Income SBC support

[Marek Vasut]

This is support for custom design based on Toradex Colibri PXA270 CPU card.
Initial patch was by Pavel Revak.

[daniel - rebased the code to follow the module/board split]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 MAINTAINERS                               |    7 +
 arch/arm/mach-pxa/Kconfig                 |    7 +
 arch/arm/mach-pxa/Makefile                |    1 +
 arch/arm/mach-pxa/colibri-pxa270-income.c |  272 +++++++++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa270.c        |   29 +++-
 arch/arm/mach-pxa/include/mach/colibri.h  |    7 +
 6 files changed, 320 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-pxa/colibri-pxa270-income.c

diff --git a/MAINTAINERS b/MAINTAINERS
index aa02bf2..38e760c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -696,6 +696,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/INCOME PXA270 SUPPORT
+M:	Marek Vasut <marek.vasut@gmail.com>
+L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/income.c
+F:	arch/arm/mach-pxa/include/mach-pxa/income.h
+
 ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 819b44f..2ff0b32 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -242,6 +242,13 @@ config MACH_COLIBRI_PXA270_EVALBOARD
 	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
 	depends on MACH_COLIBRI
 
+config MACH_COLIBRI_PXA270_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	depends on MACH_COLIBRI
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4751c9d..66e8989 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
 obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
new file mode 100644
index 0000000..37f0f3e
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -0,0 +1,272 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ  (114)
+#define GPIO0_INCOME_SD_DETECT  (0)
+#define GPIO0_INCOME_SD_RO      (1)
+#define GPIO54_INCOME_LED_A     (54)
+#define GPIO55_INCOME_LED_B     (55)
+#define GPIO113_INCOME_TS_IRQ   (113)
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
+	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
+	.detect_delay_ms	= 200,
+};
+
+static void __init income_mmc_init(void)
+{
+	pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+	pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+	{
+		.name			= "income:green:leda",
+		.default_trigger	= "none",
+		.gpio			= GPIO54_INCOME_LED_A,
+		.active_low		= 1,
+	},
+	{
+		.name			= "income:green:ledb",
+		.default_trigger	= "none",
+		.gpio			= GPIO55_INCOME_LED_B,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+	.leds		= income_gpio_leds,
+	.num_leds	= ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &income_gpio_led_info,
+	}
+};
+
+static void __init income_led_init(void)
+{
+	platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1340", 0x68),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4f),
+	},
+};
+
+static void __init income_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 10,
+	.right_margin	= 10,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 20,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+	.modes		= income_lcd_modes,
+	.num_modes	= ARRAY_SIZE(income_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+	set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0x3ff,
+	.dft_brightness	= 0x1ff,
+	.pwm_period_ns	= 1000000,
+};
+
+static struct platform_device income_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &income_backlight_data,
+	},
+};
+
+static void __init income_pwm_init(void)
+{
+	platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	income_mmc_init();
+	income_uhc_init();
+	income_led_init();
+	income_i2c_init();
+	income_lcd_init();
+	income_pwm_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index c1b8880..96ce4ae 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -110,17 +110,17 @@ static inline void colibri_pxa270_nor_init(void) {}
  ******************************************************************************/
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource colibri_pxa270_dm9000_resources[] = {
-	[0] = {
+	{
 		.start	= PXA_CS2_PHYS,
 		.end	= PXA_CS2_PHYS + 3,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	{
 		.start	= PXA_CS2_PHYS + 4,
 		.end	= PXA_CS2_PHYS + 4 + 500,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
+	{
 		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
@@ -187,12 +187,25 @@ static void __init colibri_pxa270_init(void)
 	case COLIBRI_PXA270_EVALBOARD:
 		colibri_pxa270_evalboard_init();
 		break;
+	case COLIBRI_PXA270_INCOME:
+		colibri_pxa270_income_boardinit();
+		break;
 	default:
 		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
 				colibri_pxa270_baseboard);
 	}
 }
 
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+	colibri_pxa270_init();
+}
+
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -203,3 +216,13 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.timer		= &pxa_timer,
 MACHINE_END
 
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= colibri_pxa270_income_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 6434f66..58dada1 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -10,6 +10,7 @@
 
 enum {
 	COLIBRI_PXA270_EVALBOARD = 0,
+	COLIBRI_PXA270_INCOME,
 };
 
 #if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
@@ -18,6 +19,12 @@ extern void colibri_pxa270_evalboard_init(void);
 static inline void colibri_pxa270_evalboard_init(void) {}
 #endif
 
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
 /*
  * common settings for all modules
  */
-- 
1.7.0

[PATCH 7/8] pxa/income: Add Income SBC support

[Daniel Mack]

On Sat, May 22, 2010 at 12:29:39AM +0200, Marek Vasut wrote:
> This is support for custom design based on Toradex Colibri PXA270 CPU card.
> Initial patch was by Pavel Revak.
> 
> [daniel - rebased the code to follow the module/board split]
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
>  MAINTAINERS                               |    7 +
>  arch/arm/mach-pxa/Kconfig                 |    7 +
>  arch/arm/mach-pxa/Makefile                |    1 +
>  arch/arm/mach-pxa/colibri-pxa270-income.c |  272 +++++++++++++++++++++++++++++
>  arch/arm/mach-pxa/colibri-pxa270.c        |   29 +++-
>  arch/arm/mach-pxa/include/mach/colibri.h  |    7 +
>  6 files changed, 320 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/mach-pxa/colibri-pxa270-income.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aa02bf2..38e760c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -696,6 +696,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
>  F:	arch/arm/mach-sa1100/jornada720.c
>  F:	arch/arm/mach-sa1100/include/mach/jornada720.h
>  
> +ARM/INCOME PXA270 SUPPORT
> +M:	Marek Vasut <marek.vasut@gmail.com>
> +L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> +S:	Maintained
> +F:	arch/arm/mach-pxa/income.c
> +F:	arch/arm/mach-pxa/include/mach-pxa/income.h
> +
>  ARM/INTEL IOP32X ARM ARCHITECTURE
>  M:	Lennert Buytenhek <kernel@wantstofly.org>
>  M:	Dan Williams <dan.j.williams@intel.com>
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 819b44f..2ff0b32 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -242,6 +242,13 @@ config MACH_COLIBRI_PXA270_EVALBOARD
>  	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
>  	depends on MACH_COLIBRI
>  
> +config MACH_COLIBRI_PXA270_INCOME
> +	bool "Income s.r.o. PXA270 SBC"
> +	depends on MACH_COLIBRI
> +	select PXA27x
> +	select HAVE_PWM
> +	select PXA_HAVE_BOARD_IRQS

Hmm, now that we depend on MACH_COLIBRI, I think these auto-selects can
go away as MACH_COLIBRI already cares for them, right?

Daniel

[PATCH 7/8] pxa/income: Add Income SBC support

[Eric Miao]

On Mon, May 24, 2010 at 7:01 PM, Daniel Mack <daniel@caiaq.de> wrote:
> On Sat, May 22, 2010 at 12:29:39AM +0200, Marek Vasut wrote:
>> This is support for custom design based on Toradex Colibri PXA270 CPU card.
>> Initial patch was by Pavel Revak.
>>
>> [daniel - rebased the code to follow the module/board split]
>>
>> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
>> ---
>> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?7 +
>> ?arch/arm/mach-pxa/Kconfig ? ? ? ? ? ? ? ? | ? ?7 +
>> ?arch/arm/mach-pxa/Makefile ? ? ? ? ? ? ? ?| ? ?1 +
>> ?arch/arm/mach-pxa/colibri-pxa270-income.c | ?272 +++++++++++++++++++++++++++++
>> ?arch/arm/mach-pxa/colibri-pxa270.c ? ? ? ?| ? 29 +++-
>> ?arch/arm/mach-pxa/include/mach/colibri.h ?| ? ?7 +
>> ?6 files changed, 320 insertions(+), 3 deletions(-)
>> ?create mode 100644 arch/arm/mach-pxa/colibri-pxa270-income.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index aa02bf2..38e760c 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -696,6 +696,13 @@ T: ? ? ? git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
>> ?F: ? arch/arm/mach-sa1100/jornada720.c
>> ?F: ? arch/arm/mach-sa1100/include/mach/jornada720.h
>>
>> +ARM/INCOME PXA270 SUPPORT
>> +M: ? Marek Vasut <marek.vasut@gmail.com>
>> +L: ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
>> +S: ? Maintained
>> +F: ? arch/arm/mach-pxa/income.c
>> +F: ? arch/arm/mach-pxa/include/mach-pxa/income.h
>> +
>> ?ARM/INTEL IOP32X ARM ARCHITECTURE
>> ?M: ? Lennert Buytenhek <kernel@wantstofly.org>
>> ?M: ? Dan Williams <dan.j.williams@intel.com>
>> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
>> index 819b44f..2ff0b32 100644
>> --- a/arch/arm/mach-pxa/Kconfig
>> +++ b/arch/arm/mach-pxa/Kconfig
>> @@ -242,6 +242,13 @@ config MACH_COLIBRI_PXA270_EVALBOARD
>> ? ? ? bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
>> ? ? ? depends on MACH_COLIBRI
>>
>> +config MACH_COLIBRI_PXA270_INCOME
>> + ? ? bool "Income s.r.o. PXA270 SBC"
>> + ? ? depends on MACH_COLIBRI
>> + ? ? select PXA27x
>> + ? ? select HAVE_PWM
>> + ? ? select PXA_HAVE_BOARD_IRQS
>
> Hmm, now that we depend on MACH_COLIBRI, I think these auto-selects can
> go away as MACH_COLIBRI already cares for them, right?
>

Indeed. And if this income could be only used on colibri 270, I'd like to see
the naming be consistent with colibri-pxa270-evalboard.c. (though honestly,
I don't quite like a name to be that long)
> Daniel
>

[PATCH 7/8] pxa/income: Add Income SBC support

[Daniel Mack]

Hi Eric,

On Wed, May 26, 2010 at 10:18:19PM +0800, Eric Miao wrote:
> On Mon, May 24, 2010 at 7:01 PM, Daniel Mack <daniel@caiaq.de> wrote:
> >> +config MACH_COLIBRI_PXA270_INCOME
> >> + ? ? bool "Income s.r.o. PXA270 SBC"
> >> + ? ? depends on MACH_COLIBRI
> >> + ? ? select PXA27x
> >> + ? ? select HAVE_PWM
> >> + ? ? select PXA_HAVE_BOARD_IRQS
> >
> > Hmm, now that we depend on MACH_COLIBRI, I think these auto-selects can
> > go away as MACH_COLIBRI already cares for them, right?
> >
> 
> Indeed. And if this income could be only used on colibri 270, I'd like to see
> the naming be consistent with colibri-pxa270-evalboard.c. (though honestly,
> I don't quite like a name to be that long)

Would you like to come up with a better one :) If you want, you could
just amend the patch and commit it as you wish, or just let me know how
you'd like it and I repost.

Thanks,
Daniel

[PATCH 8/8] ARM: pxa/colibri-pxa270: update defconfig

[Marek Vasut]

From: Daniel Mack <daniel@caiaq.de>

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/configs/colibri_pxa270_defconfig |  559 ++++++++++++++++++++--------
 1 files changed, 399 insertions(+), 160 deletions(-)

diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index c962870..ce652c2 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:18:17 2009
+# Linux kernel version: 2.6.34-rc7
+# Fri May 14 14:18:21 2010
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,15 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,10 +37,17 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -48,15 +56,16 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -64,6 +73,10 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -85,6 +98,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -96,6 +118,12 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -107,8 +135,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,31 +143,62 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 CONFIG_FREEZER=y
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -148,58 +206,99 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
 # CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_COLIBRI=y
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
 # CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
 # CONFIG_MACH_TAVOREVB is not set
 # CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_ARCOM_ZEUS is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
 # CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_MACH_COLIBRI=y
+CONFIG_MACH_COLIBRI_PXA270_EVALBOARD=y
+CONFIG_MACH_COLIBRI_PXA270_INCOME=y
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_VPAC270 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
 # CONFIG_MACH_MAGICIAN is not set
 # CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
 # CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_ZIPIT2 is not set
 CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
@@ -207,7 +306,7 @@ CONFIG_PXA27x=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -218,9 +317,10 @@ CONFIG_CPU_CP15_MMU=y
 #
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -241,13 +341,15 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -255,12 +357,15 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -275,7 +380,8 @@ CONFIG_CMDLINE=""
 # CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
 
 #
 # Floating point emulation
@@ -284,8 +390,7 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_NWFPE is not set
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -296,6 +401,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -306,15 +412,15 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -375,6 +481,7 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -389,6 +496,8 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -458,19 +567,28 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HCIBPA10X is not set
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 CONFIG_LIB80211_CRYPT_WEP=y
 CONFIG_LIB80211_CRYPT_CCMP=y
 CONFIG_LIB80211_CRYPT_TKIP=y
+# CONFIG_LIB80211_DEBUG is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -484,6 +602,7 @@ CONFIG_LIB80211_CRYPT_TKIP=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -496,9 +615,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -554,10 +673,10 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_PXA2XX is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -611,6 +730,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -619,10 +739,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -630,7 +754,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -655,6 +781,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -686,17 +813,18 @@ CONFIG_PHYLIB=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -705,21 +833,19 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+CONFIG_WLAN=y
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_ATH_COMMON is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -733,6 +859,7 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -740,6 +867,7 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -747,6 +875,7 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -763,14 +892,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
@@ -778,13 +912,19 @@ CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -794,6 +934,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -811,6 +952,7 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -832,21 +974,21 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PXA is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -857,10 +999,12 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PXA is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -874,22 +1018,15 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -898,13 +1035,16 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -913,10 +1053,25 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -925,19 +1080,22 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -948,17 +1106,24 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -968,8 +1133,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -979,6 +1144,7 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SA1100_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 
 #
 # USB-based Watchdog Cards
@@ -995,10 +1161,12 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
@@ -1006,26 +1174,28 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_MAX1586=y
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1057,7 +1227,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
+CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
@@ -1065,12 +1235,14 @@ CONFIG_FB_PXA=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_PWM is not set
 
 #
 # Display device support
@@ -1100,10 +1272,36 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_PXA2XX_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1121,8 +1319,9 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_HID_APPLE is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_WACOM is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1137,8 +1336,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
@@ -1151,7 +1348,12 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -1167,11 +1369,11 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1192,7 +1394,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -1216,17 +1418,21 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1239,11 +1445,9 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1252,7 +1456,6 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1265,31 +1468,40 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
 CONFIG_USB_DUMMY_HCD=m
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 # CONFIG_USB_ETH is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1308,23 +1520,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_PXA is not set
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 # CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -1352,9 +1550,11 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1372,7 +1572,9 @@ CONFIG_RTC_DRV_PCF8583=m
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1381,8 +1583,12 @@ CONFIG_RTC_DRV_PCF8583=m
 # CONFIG_RTC_DRV_SA1100 is not set
 # CONFIG_RTC_DRV_PXA is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1394,11 +1600,13 @@ CONFIG_RTC_DRV_PCF8583=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1408,6 +1616,11 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1454,6 +1667,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1469,6 +1683,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1480,10 +1695,10 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1544,6 +1759,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1552,11 +1768,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1568,6 +1788,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
@@ -1576,37 +1797,44 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1617,15 +1845,17 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1634,10 +1864,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1665,11 +1897,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1706,6 +1940,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1713,6 +1948,7 @@ CONFIG_CRYPTO_DEFLATE=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1728,9 +1964,12 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_REED_SOLOMON=y
 CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
-- 
1.7.0