All of lore.kernel.org
 help / color / mirror / Atom feed
From: baruch@tkos.co.il (Baruch Siach)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/3] Driver for the i.MX2x CMOS Sensor Interface
Date: Thu, 10 Jun 2010 08:26:19 +0300	[thread overview]
Message-ID: <20100610052618.GA31840@jasper.tkos.co.il> (raw)
In-Reply-To: <cover.1274865040.git.baruch@tkos.co.il>

Hi linux-media list,

Ping?
Any news on this?

baruch

On Wed, May 26, 2010 at 12:13:15PM +0300, Baruch Siach wrote:
> This series contains a soc_camera driver for the i.MX25/i.MX27 CSI device, and
> platform code for the i.MX25 and i.MX27 chips. This driver is based on a 
> driver for i.MX27 CSI from Sascha Hauer, that  Alan Carvalho de Assis has 
> posted in linux-media last December[1]. I tested the mx2_camera driver on the 
> i.MX25 PDK. Sascha Hauer has tested a earlier version of this driver on an 
> i.MX27 based board. I included in this version some fixes from Sascha that 
> enable i.MX27 support.
> 
> [1] https://patchwork.kernel.org/patch/67636/
> 
> Changes v2 -> v3
>     Address more comments from Guennadi Liakhovetski.
> 
>     Applied part of Sashca's patch that I forgot in v2.
> 
> Changes v1 -> v2
>     Addressed the comments of Guennadi Liakhovetski except from the following:
> 
>     1. The mclk_get_divisor implementation, since I don't know what this code 
>        is good for
> 
>     2. mx2_videobuf_release should not set pcdev->active on i.MX27, because 
>        mx27_camera_frame_done needs this pointer
> 
>     3. In mx27_camera_emma_buf_init I don't know the meaning of those hard 
>        coded magic numbers
> 
>     Applied i.MX27 fixes from Sascha.
> 
> Baruch Siach (3):
>   mx2_camera: Add soc_camera support for i.MX25/i.MX27
>   mx27: add support for the CSI device
>   mx25: add support for the CSI device
> 
>  arch/arm/mach-mx2/clock_imx27.c          |    2 +-
>  arch/arm/mach-mx2/devices.c              |   31 +
>  arch/arm/mach-mx2/devices.h              |    1 +
>  arch/arm/mach-mx25/clock.c               |   14 +-
>  arch/arm/mach-mx25/devices.c             |   22 +
>  arch/arm/mach-mx25/devices.h             |    1 +
>  arch/arm/plat-mxc/include/mach/memory.h  |    4 +-
>  arch/arm/plat-mxc/include/mach/mx25.h    |    2 +
>  arch/arm/plat-mxc/include/mach/mx2_cam.h |   46 +
>  drivers/media/video/Kconfig              |   13 +
>  drivers/media/video/Makefile             |    1 +
>  drivers/media/video/mx2_camera.c         | 1488 ++++++++++++++++++++++++++++++
>  12 files changed, 1620 insertions(+), 5 deletions(-)
>  create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h
>  create mode 100644 drivers/media/video/mx2_camera.c
> 

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

WARNING: multiple messages have this Message-ID (diff)
From: Baruch Siach <baruch@tkos.co.il>
To: linux-media@vger.kernel.org
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
	Sascha Hauer <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/3] Driver for the i.MX2x CMOS Sensor Interface
Date: Thu, 10 Jun 2010 08:26:19 +0300	[thread overview]
Message-ID: <20100610052618.GA31840@jasper.tkos.co.il> (raw)
In-Reply-To: <cover.1274865040.git.baruch@tkos.co.il>

Hi linux-media list,

Ping?
Any news on this?

baruch

On Wed, May 26, 2010 at 12:13:15PM +0300, Baruch Siach wrote:
> This series contains a soc_camera driver for the i.MX25/i.MX27 CSI device, and
> platform code for the i.MX25 and i.MX27 chips. This driver is based on a 
> driver for i.MX27 CSI from Sascha Hauer, that  Alan Carvalho de Assis has 
> posted in linux-media last December[1]. I tested the mx2_camera driver on the 
> i.MX25 PDK. Sascha Hauer has tested a earlier version of this driver on an 
> i.MX27 based board. I included in this version some fixes from Sascha that 
> enable i.MX27 support.
> 
> [1] https://patchwork.kernel.org/patch/67636/
> 
> Changes v2 -> v3
>     Address more comments from Guennadi Liakhovetski.
> 
>     Applied part of Sashca's patch that I forgot in v2.
> 
> Changes v1 -> v2
>     Addressed the comments of Guennadi Liakhovetski except from the following:
> 
>     1. The mclk_get_divisor implementation, since I don't know what this code 
>        is good for
> 
>     2. mx2_videobuf_release should not set pcdev->active on i.MX27, because 
>        mx27_camera_frame_done needs this pointer
> 
>     3. In mx27_camera_emma_buf_init I don't know the meaning of those hard 
>        coded magic numbers
> 
>     Applied i.MX27 fixes from Sascha.
> 
> Baruch Siach (3):
>   mx2_camera: Add soc_camera support for i.MX25/i.MX27
>   mx27: add support for the CSI device
>   mx25: add support for the CSI device
> 
>  arch/arm/mach-mx2/clock_imx27.c          |    2 +-
>  arch/arm/mach-mx2/devices.c              |   31 +
>  arch/arm/mach-mx2/devices.h              |    1 +
>  arch/arm/mach-mx25/clock.c               |   14 +-
>  arch/arm/mach-mx25/devices.c             |   22 +
>  arch/arm/mach-mx25/devices.h             |    1 +
>  arch/arm/plat-mxc/include/mach/memory.h  |    4 +-
>  arch/arm/plat-mxc/include/mach/mx25.h    |    2 +
>  arch/arm/plat-mxc/include/mach/mx2_cam.h |   46 +
>  drivers/media/video/Kconfig              |   13 +
>  drivers/media/video/Makefile             |    1 +
>  drivers/media/video/mx2_camera.c         | 1488 ++++++++++++++++++++++++++++++
>  12 files changed, 1620 insertions(+), 5 deletions(-)
>  create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h
>  create mode 100644 drivers/media/video/mx2_camera.c
> 

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

  parent reply	other threads:[~2010-06-10  5:26 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-26  9:13 [PATCH v3 0/3] Driver for the i.MX2x CMOS Sensor Interface Baruch Siach
2010-05-26  9:13 ` Baruch Siach
2010-05-26  9:13 ` [PATCH v3 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27 Baruch Siach
2010-05-26  9:13   ` Baruch Siach
2010-06-19 14:13   ` Guennadi Liakhovetski
2010-06-19 14:13     ` Guennadi Liakhovetski
2010-06-21  5:15     ` Baruch Siach
2010-06-21  5:15       ` Baruch Siach
2010-05-26  9:13 ` [PATCH v3 2/3] mx27: add support for the CSI device Baruch Siach
2010-05-26  9:13   ` Baruch Siach
2010-05-26  9:13 ` [PATCH v3 3/3] mx25: " Baruch Siach
2010-05-26  9:13   ` Baruch Siach
2010-06-10  5:26 ` Baruch Siach [this message]
2010-06-10  5:26   ` [PATCH v3 0/3] Driver for the i.MX2x CMOS Sensor Interface Baruch Siach
2010-06-10  6:00   ` Guennadi Liakhovetski
2010-06-10  6:00     ` Guennadi Liakhovetski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100610052618.GA31840@jasper.tkos.co.il \
    --to=baruch@tkos.co.il \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.