* [lm-sensors] [PATCH] hwmon: Remove in[0-*]_fault from
@ 2010-06-30 15:30 Jean Delvare
2010-06-30 15:46 ` Guenter Roeck
0 siblings, 1 reply; 2+ messages in thread
From: Jean Delvare @ 2010-06-30 15:30 UTC (permalink / raw)
To: lm-sensors
Fault files are for hardware failures that can be reported. So far
we've seen chips reporting such failures for temperature sensors and
fans, but not for voltages. Remove in[0-*]_fault for now. It can be
added back later if really needed, but I doubt it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
---
Documentation/hwmon/sysfs-interface | 1 -
1 file changed, 1 deletion(-)
--- linux-2.6.35-rc3.orig/Documentation/hwmon/sysfs-interface 2010-06-30 09:10:06.000000000 +0200
+++ linux-2.6.35-rc3/Documentation/hwmon/sysfs-interface 2010-06-30 17:24:09.000000000 +0200
@@ -516,7 +516,6 @@ to notify open diodes, unconnected fans
supports it. When this boolean has value 1, the measurement for that
channel should not be trusted.
-in[0-*]_fault
fan[1-*]_fault
temp[1-*]_fault
Input fault condition
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [lm-sensors] [PATCH] hwmon: Remove in[0-*]_fault from
2010-06-30 15:30 [lm-sensors] [PATCH] hwmon: Remove in[0-*]_fault from Jean Delvare
@ 2010-06-30 15:46 ` Guenter Roeck
0 siblings, 0 replies; 2+ messages in thread
From: Guenter Roeck @ 2010-06-30 15:46 UTC (permalink / raw)
To: lm-sensors
On Wed, Jun 30, 2010 at 11:30:05AM -0400, Jean Delvare wrote:
> Fault files are for hardware failures that can be reported. So far
> we've seen chips reporting such failures for temperature sensors and
> fans, but not for voltages. Remove in[0-*]_fault for now. It can be
> added back later if really needed, but I doubt it.
>
> Signed-off-by: Jean Delvare <khali@linux-fr.org>
> Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
> ---
> Documentation/hwmon/sysfs-interface | 1 -
> 1 file changed, 1 deletion(-)
>
> --- linux-2.6.35-rc3.orig/Documentation/hwmon/sysfs-interface 2010-06-30 09:10:06.000000000 +0200
> +++ linux-2.6.35-rc3/Documentation/hwmon/sysfs-interface 2010-06-30 17:24:09.000000000 +0200
> @@ -516,7 +516,6 @@ to notify open diodes, unconnected fans
> supports it. When this boolean has value 1, the measurement for that
> channel should not be trusted.
>
> -in[0-*]_fault
> fan[1-*]_fault
> temp[1-*]_fault
> Input fault condition
>
>
> --
> Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-06-30 15:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-30 15:30 [lm-sensors] [PATCH] hwmon: Remove in[0-*]_fault from Jean Delvare
2010-06-30 15:46 ` Guenter Roeck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.