From: Christoph Hellwig <hch@lst.de>
To: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James.Bottomley@suse.de, snitzer@redhat.com, hch@lst.de,
axboe@kernel.dk, linux-scsi@vger.kernel.org, dm-devel@redhat.com
Subject: Re: [RFC 1/2] block: implement an unprep function corresponding directly to prep
Date: Fri, 2 Jul 2010 13:03:44 +0200 [thread overview]
Message-ID: <20100702110343.GA27159@lst.de> (raw)
In-Reply-To: <20100701104653O.fujita.tomonori@lab.ntt.co.jp>
On Thu, Jul 01, 2010 at 10:47:12AM +0900, FUJITA Tomonori wrote:
> I think so. If I can figure out why qemu scsi driver is broken, the
> job is done.
Well, I still have problems even with libata + a trim capable SSD.
Dmesg from the last attept with your patch to use FS requests all the
way:
[ 27.669404] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
[ 27.669533] ata2.00: irq_stat 0x08000000, interface fatal error
[ 27.669627] ata2: SError: { UnrecovData Handshk }
[ 27.669720] ata2.00: failed command: WRITE FPDMA QUEUED
[ 27.669819] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
[ 27.669821] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 27.670096] ata2.00: status: { DRDY }
[ 27.670196] ata2: hard resetting link
[ 27.975118] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 27.978618] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 27.978628] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 27.978756] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 27.984299] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 27.984309] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 27.984437] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 27.984814] ata2.00: configured for UDMA/133
[ 27.987548] ata2.00: configured for UDMA/133
[ 27.987645] ata2: EH complete
[ 27.987784] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
[ 27.987915] ata2.00: irq_stat 0x08000000, interface fatal error
[ 27.988026] ata2: SError: { UnrecovData Handshk }
[ 27.988128] ata2.00: failed command: WRITE FPDMA QUEUED
[ 27.988234] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
[ 27.988236] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 27.988499] ata2.00: status: { DRDY }
[ 27.988591] ata2: hard resetting link
[ 28.293109] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 28.297509] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 28.297518] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 28.297648] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 28.301854] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 28.301863] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 28.301991] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 28.302378] ata2.00: configured for UDMA/133
[ 28.305024] ata2.00: configured for UDMA/133
[ 28.305123] ata2: EH complete
[ 28.305292] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
[ 28.305421] ata2.00: irq_stat 0x08000000, interface fatal error
[ 28.305513] ata2: SError: { UnrecovData Handshk }
[ 28.305605] ata2.00: failed command: WRITE FPDMA QUEUED
[ 28.305703] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
[ 28.305705] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 28.305948] ata2.00: status: { DRDY }
[ 28.306066] ata2: hard resetting link
[ 28.611111] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 28.613232] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 28.613241] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 28.613378] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 28.619103] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 28.619112] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 28.619240] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 28.619616] ata2.00: configured for UDMA/133
[ 28.623193] ata2.00: configured for UDMA/133
[ 28.623289] ata2: EH complete
[ 28.623427] ata2: limiting SATA link speed to 1.5 Gbps
[ 28.623528] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
[ 28.623651] ata2.00: irq_stat 0x08000000, interface fatal error
[ 28.623745] ata2: SError: { UnrecovData Handshk }
[ 28.623836] ata2.00: failed command: WRITE FPDMA QUEUED
[ 28.623934] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
[ 28.623937] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 28.624202] ata2.00: status: { DRDY }
[ 28.624303] ata2: hard resetting link
[ 28.929103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 28.932449] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 28.932458] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 28.932587] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 28.939190] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 28.939200] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 28.939328] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 28.939763] ata2.00: configured for UDMA/133
[ 28.941154] ata2.00: configured for UDMA/133
[ 28.941250] ata2: EH complete
[ 28.941414] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
[ 28.941538] ata2.00: irq_stat 0x08000000, interface fatal error
[ 28.941631] ata2: SError: { UnrecovData Handshk }
[ 28.941722] ata2.00: failed command: WRITE FPDMA QUEUED
[ 28.941821] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
[ 28.941823] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 28.942091] ata2.00: status: { DRDY }
[ 28.942187] ata2: hard resetting link
[ 29.247116] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 29.250536] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 29.250545] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 29.250673] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 29.256129] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 29.256138] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 29.256266] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 29.256651] ata2.00: configured for UDMA/133
[ 29.259263] ata2.00: configured for UDMA/133
[ 29.259359] ata2: EH complete
[ 29.259533] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
[ 29.259659] ata2.00: irq_stat 0x08000000, interface fatal error
[ 29.259752] ata2: SError: { UnrecovData Handshk }
[ 29.259843] ata2.00: failed command: WRITE FPDMA QUEUED
[ 29.259942] ata2.00: cmd 61/ff:00:00:00:00/ff:00:00:00:00/40 tag 0 ncq 33553920 out
[ 29.259945] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 29.260218] ata2.00: status: { DRDY }
[ 29.260319] ata2: hard resetting link
[ 29.565102] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 29.569593] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 29.569603] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 29.569731] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 29.573969] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 29.573978] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 29.574127] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 29.574543] ata2.00: configured for UDMA/133
[ 29.577217] ata2.00: configured for UDMA/133
[ 29.577313] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 29.577460] sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
[ 29.577786] Descriptor sense data with sense descriptors (in hex):
[ 29.577928] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 29.578923] 00 00 00 00
[ 29.579301] sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
[ 29.579496] sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 00 00 00 00 ff ff 00
[ 29.580281] end_request: I/O error, dev sdb, sector 0
[ 29.580395] ata2: EH complete
next prev parent reply other threads:[~2010-07-02 11:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-30 17:01 [RFC 1/2] block: implement an unprep function corresponding directly to prep James Bottomley
2010-06-30 17:10 ` [RFC 2/2] sd: free discard page in unprep function James Bottomley
2010-06-30 17:23 ` [RFC 1/2] block: implement an unprep function corresponding directly to prep Mike Snitzer
2010-06-30 17:51 ` Jens Axboe
2010-06-30 17:54 ` Martin K. Petersen
2010-07-01 1:47 ` FUJITA Tomonori
2010-07-01 3:47 ` Mike Snitzer
2010-07-01 4:44 ` [dm-devel] " FUJITA Tomonori
2010-07-02 11:03 ` Christoph Hellwig [this message]
2010-07-05 7:00 ` FUJITA Tomonori
2010-07-05 19:24 ` Christoph Hellwig
2010-07-05 21:50 ` Mark Lord
2010-07-05 21:54 ` Mark Lord
2010-07-05 22:00 ` Jeff Garzik
2010-08-03 3:01 ` Mark Lord
2010-07-06 7:04 ` FUJITA Tomonori
-- strict thread matches above, loose matches on Subject: below --
2010-06-30 17:01 James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100702110343.GA27159@lst.de \
--to=hch@lst.de \
--cc=James.Bottomley@suse.de \
--cc=axboe@kernel.dk \
--cc=dm-devel@redhat.com \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=linux-scsi@vger.kernel.org \
--cc=snitzer@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.