[PATCH 0/2] pandora updates for .36

[PATCH 0/2] pandora updates for .36

[Grazvydas Ignotas]

Hi Tony,

here are some updates for Pandora, which we have now around 700 units
shipped (finally!) after years of developemt hell. More are being
made at the moment.

Patch 2/2 has incorporated my last patch that missed the last merge
window, and depends on "pass wl1251 information to SDIO core" [1],
will rebase if that one does not get through. The NAND portion
assumes Sukumar's NAND/GMPC cleanup patches are incorporated as it
doesn't set up those gpmc*_baseaddr variables.

1: http://marc.info/?l=linux-omap&m=127781938327423&w=2

Grazvydas Ignotas (2):
  omap3: pandora: update gpio-keys data
  omap3: pandora: add NAND and wifi support

 arch/arm/mach-omap2/board-omap3pandora.c |  149 ++++++++++++++++++++++++++----
 1 files changed, 130 insertions(+), 19 deletions(-)

[PATCH 1/2] omap3: pandora: update gpio-keys data

[Grazvydas Ignotas]

Update gpio-keys setup so it matches what is on default firmware.
Also make use of debounce feature in gpio-keys instead of setting it
explicitly, as gpio-keys is now capable of using hardware debounce on
OMAPs thanks to recent gpiolib changes.
Also fix a sparce warning along the way.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
---
 arch/arm/mach-omap2/board-omap3pandora.c |   30 ++++++++++--------------------
 1 files changed, 10 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ebbfb49..6131d98 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -49,9 +49,6 @@
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
-/* hardware debounce: (value + 1) * 31us */
-#define GPIO_DEBOUNCE_TIME		127
-
 static struct gpio_led pandora_gpio_leds[] = {
 	{
 		.name			= "pandora::sd1",
@@ -89,6 +86,7 @@ static struct platform_device pandora_leds_gpio = {
 	.type		= ev_type,				\
 	.code		= ev_code,				\
 	.active_low	= act_low,				\
+	.debounce_interval = 4,					\
 	.desc		= "btn " descr,				\
 }
 
@@ -100,14 +98,14 @@ static struct gpio_keys_button pandora_gpio_keys[] = {
 	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
 	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
 	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(109,	KEY_KP1,	"game 1"),
-	GPIO_BUTTON_LOW(111,	KEY_KP2,	"game 2"),
-	GPIO_BUTTON_LOW(106,	KEY_KP3,	"game 3"),
-	GPIO_BUTTON_LOW(101,	KEY_KP4,	"game 4"),
-	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
-	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
-	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
-	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
+	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
+	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
+	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
+	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
+	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
+	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
+	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
 	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
 	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
 	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
@@ -128,14 +126,7 @@ static struct platform_device pandora_keys_gpio = {
 	},
 };
 
-static void __init pandora_keys_gpio_init(void)
-{
-	/* set debounce time for GPIO banks 4 and 6 */
-	gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
-	gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
-}
-
-static int board_keymap[] = {
+static const uint32_t board_keymap[] = {
 	/* row, col, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_8),
@@ -598,7 +589,6 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
-	pandora_keys_gpio_init();
 	usb_musb_init(&musb_board_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-- 
1.6.3.3

[APPLIED] [PATCH 1/2] omap3: pandora: update gpio-keys data

[Tony Lindgren]

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: devel-boards

Initial commit ID (Likely to change): 80572cd4a255c3241195a1762c5d947c7b602dff

PatchWorks
http://patchwork.kernel.org/patch/109372/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=80572cd4a255c3241195a1762c5d947c7b602dff

[PATCH 2/2] omap3: pandora: add NAND and wifi support

[Grazvydas Ignotas]

Add platform data for NAND and wifi, also setup all GPIOs
needed to use the wifi chip.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
---
 arch/arm/mach-omap2/board-omap3pandora.c |  121 ++++++++++++++++++++++++++++++
 1 files changed, 121 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 6131d98..690e0a7 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -29,7 +29,10 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
+#include <linux/spi/wl12xx.h>
 #include <linux/mmc/card.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -42,13 +45,50 @@
 #include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/nand.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 
+#define PANDORA_WIFI_IRQ_GPIO		21
+#define PANDORA_WIFI_NRESET_GPIO	23
 #define OMAP3_PANDORA_TS_GPIO		94
 
+#define NAND_BLOCK_SIZE			SZ_128K
+
+static struct mtd_partition omap3pandora_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	}, {
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 15 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "uboot-env",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 1 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 80 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data pandora_nand_data = {
+	.cs		= 0,
+	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
+	.parts		= omap3pandora_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
+};
+
 static struct gpio_led pandora_gpio_leds[] = {
 	{
 		.name			= "pandora::sd1",
@@ -254,6 +294,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 		.wires		= 4,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.ocr_mask	= 0x80,	/* MMC_VDD_165_195 */
 		.init_card	= pandora_wl1251_init_card,
 	},
 	{}	/* Terminator */
@@ -262,12 +303,33 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret, gpio_32khz;
+
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	omap2_hsmmc_init(omap3pandora_mmc);
 
+	/* gpio + 13 drives 32kHz buffer for wifi module */
+	gpio_32khz = gpio + 13;
+	ret = gpio_request(gpio_32khz, "wifi 32kHz");
+	if (ret < 0) {
+		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail;
+	}
+
+	ret = gpio_direction_output(gpio_32khz, 1);
+	if (ret < 0) {
+		pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail_direction;
+	}
+
 	return 0;
+
+fail_direction:
+	gpio_free(gpio_32khz);
+fail:
+	return -ENODEV;
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
@@ -546,10 +608,67 @@ static void __init omap3pandora_init_irq(void)
 	omap_gpio_init();
 }
 
+static void pandora_wl1251_set_power(bool enable)
+{
+	/*
+	 * Keep power always on until wl1251_sdio driver learns to re-init
+	 * the chip after powering it down and back up.
+	 */
+}
+
+static struct wl12xx_platform_data pandora_wl1251_pdata = {
+	.set_power	= pandora_wl1251_set_power,
+	.use_eeprom	= true,
+};
+
+static struct platform_device pandora_wl1251_data = {
+	.name           = "wl1251_data",
+	.id             = -1,
+	.dev		= {
+		.platform_data	= &pandora_wl1251_pdata,
+	},
+};
+
+static void pandora_wl1251_init(void)
+{
+	int ret;
+
+	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto fail;
+
+	ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
+	if (ret < 0)
+		goto fail_irq;
+
+	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+	if (pandora_wl1251_pdata.irq < 0)
+		goto fail_irq;
+
+	ret = gpio_request(PANDORA_WIFI_NRESET_GPIO, "wl1251 nreset");
+	if (ret < 0)
+		goto fail_irq;
+
+	/* start powered so that it probes with MMC subsystem */
+	ret = gpio_direction_output(PANDORA_WIFI_NRESET_GPIO, 1);
+	if (ret < 0)
+		goto fail_nreset;
+
+	return;
+
+fail_nreset:
+	gpio_free(PANDORA_WIFI_NRESET_GPIO);
+fail_irq:
+	gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 	&pandora_dss_device,
+	&pandora_wl1251_data,
 };
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -582,6 +701,7 @@ static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
+	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
 	omap_serial_init();
@@ -590,6 +710,7 @@ static void __init omap3pandora_init(void)
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
 	usb_musb_init(&musb_board_data);
+	gpmc_nand_init(&pandora_nand_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-- 
1.6.3.3

Re: [PATCH 2/2] omap3: pandora: add NAND and wifi support

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 285 bytes --]

* Grazvydas Ignotas <notasas@gmail.com> [100701 22:52]:
> Add platform data for NAND and wifi, also setup all GPIOs
> needed to use the wifi chip.

I've applied this after tweaking it a bit to apply as the
SDIO series is getting merged via Andrew. Updated patch
below.

Regards,

Tony

[-- Attachment #2: pandora-wifi-nand.patch --]
[-- Type: text/x-diff, Size: 5332 bytes --]

>From ebc8d2747c38e35d3baf7967ac722b5e828d5800 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Thu, 1 Jul 2010 19:58:21 +0000
Subject: [PATCH] Add platform data for NAND and wifi, also setup all GPIOs
 needed to use the wifi chip.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7a12729..7cee651 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -29,6 +29,9 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
+#include <linux/spi/wl12xx.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,13 +44,50 @@
 #include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/nand.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 
+#define PANDORA_WIFI_IRQ_GPIO		21
+#define PANDORA_WIFI_NRESET_GPIO	23
 #define OMAP3_PANDORA_TS_GPIO		94
 
+#define NAND_BLOCK_SIZE			SZ_128K
+
+static struct mtd_partition omap3pandora_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	}, {
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 15 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "uboot-env",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 1 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 80 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data pandora_nand_data = {
+	.cs		= 0,
+	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
+	.parts		= omap3pandora_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
+};
+
 static struct gpio_led pandora_gpio_leds[] = {
 	{
 		.name			= "pandora::sd1",
@@ -246,12 +286,33 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret, gpio_32khz;
+
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	omap2_hsmmc_init(omap3pandora_mmc);
 
+	/* gpio + 13 drives 32kHz buffer for wifi module */
+	gpio_32khz = gpio + 13;
+	ret = gpio_request(gpio_32khz, "wifi 32kHz");
+	if (ret < 0) {
+		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail;
+	}
+
+	ret = gpio_direction_output(gpio_32khz, 1);
+	if (ret < 0) {
+		pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail_direction;
+	}
+
 	return 0;
+
+fail_direction:
+	gpio_free(gpio_32khz);
+fail:
+	return -ENODEV;
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
@@ -530,10 +591,67 @@ static void __init omap3pandora_init_irq(void)
 	omap_gpio_init();
 }
 
+static void pandora_wl1251_set_power(bool enable)
+{
+	/*
+	 * Keep power always on until wl1251_sdio driver learns to re-init
+	 * the chip after powering it down and back up.
+	 */
+}
+
+static struct wl12xx_platform_data pandora_wl1251_pdata = {
+	.set_power	= pandora_wl1251_set_power,
+	.use_eeprom	= true,
+};
+
+static struct platform_device pandora_wl1251_data = {
+	.name           = "wl1251_data",
+	.id             = -1,
+	.dev		= {
+		.platform_data	= &pandora_wl1251_pdata,
+	},
+};
+
+static void pandora_wl1251_init(void)
+{
+	int ret;
+
+	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto fail;
+
+	ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
+	if (ret < 0)
+		goto fail_irq;
+
+	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+	if (pandora_wl1251_pdata.irq < 0)
+		goto fail_irq;
+
+	ret = gpio_request(PANDORA_WIFI_NRESET_GPIO, "wl1251 nreset");
+	if (ret < 0)
+		goto fail_irq;
+
+	/* start powered so that it probes with MMC subsystem */
+	ret = gpio_direction_output(PANDORA_WIFI_NRESET_GPIO, 1);
+	if (ret < 0)
+		goto fail_nreset;
+
+	return;
+
+fail_nreset:
+	gpio_free(PANDORA_WIFI_NRESET_GPIO);
+fail_irq:
+	gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 	&pandora_dss_device,
+	&pandora_wl1251_data,
 };
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -566,6 +684,7 @@ static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
+	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
 	omap_serial_init();
@@ -574,6 +693,7 @@ static void __init omap3pandora_init(void)
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
 	usb_musb_init(&musb_board_data);
+	gpmc_nand_init(&pandora_nand_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);

Re: [PATCH 2/2] omap3: pandora: add NAND and wifi support

[Grazvydas Ignotas]

On Mon, Jul 5, 2010 at 1:05 PM, Tony Lindgren <tony@atomide.com> wrote:
> * Grazvydas Ignotas <notasas@gmail.com> [100701 22:52]:
>> Add platform data for NAND and wifi, also setup all GPIOs
>> needed to use the wifi chip.
>
> I've applied this after tweaking it a bit to apply as the
> SDIO series is getting merged via Andrew. Updated patch
> below.

Thanks, but the card will not probe without the .ocr_mask part. We could either:
- take mmc patches 2 and 3 through linux-omap (they don't really
depend on patch 1) and ask Andrew to drop them
- I could send one-liner fix after the merge window for -rc or next
merge window in the worst case

both are ok with me.

Re: [PATCH 0/2] pandora updates for .36

[Paul Walmsley]

On Thu, 1 Jul 2010, Grazvydas Ignotas wrote:

> here are some updates for Pandora, which we have now around 700 units
> shipped (finally!) after years of developemt hell. More are being
> made at the moment.

Woohoo!  Congratulations to you and the rest of the team :-)


- Paul

RE: [PATCH 0/2] pandora updates for .36

[Gadiyar, Anand]

Grazvydas Ignotas wrote:
> 
> Hi Tony,
> 
> here are some updates for Pandora, which we have now around 700 units
> shipped (finally!) after years of developemt hell. More are being
> made at the moment.
> 

Neat! Hope you sell a zillion. I'll try and buy one someday.

- Anand

Re: [PATCH 0/2] pandora updates for .36

[Tony Lindgren]

* Gadiyar, Anand <gadiyar@ti.com> [100701 23:25]:
> Grazvydas Ignotas wrote:
> > 
> > Hi Tony,
> > 
> > here are some updates for Pandora, which we have now around 700 units
> > shipped (finally!) after years of developemt hell. More are being
> > made at the moment.
> > 
> 
> Neat! Hope you sell a zillion. I'll try and buy one someday.

Yeah congrats! I'll be buying one too at some point :)

Looking at all the patches for the merge window now, will queue
up the pandora changes too.

Tony