From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
To: LKML <linux-kernel@vger.kernel.org>,
linux-mm <linux-mm@kvack.org>,
Andrew Morton <akpm@linux-foundation.org>
Cc: kosaki.motohiro@jp.fujitsu.com
Subject: [PATCH] reduce stack usage of node_read_meminfo()
Date: Thu, 8 Jul 2010 18:20:14 +0900 (JST) [thread overview]
Message-ID: <20100708181629.CD3C.A69D9226@jp.fujitsu.com> (raw)
Now, cmpilation node_read_meminfo() output following warning. Because
it has very large sprintf() argument.
drivers/base/node.c: In function 'node_read_meminfo':
drivers/base/node.c:139: warning: the frame size of 848 bytes is
larger than 512 bytes
This patch fixes it by splitting sprintf() in three parts.
It doesn't have functional change.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
---
drivers/base/node.c | 46 +++++++++++++++++++++++-----------------------
1 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 2bdd8a9..a0fb2ef 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -66,8 +66,7 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
struct sysinfo i;
si_meminfo_node(&i, nid);
-
- n = sprintf(buf, "\n"
+ n = sprintf(buf,
"Node %d MemTotal: %8lu kB\n"
"Node %d MemFree: %8lu kB\n"
"Node %d MemUsed: %8lu kB\n"
@@ -78,13 +77,33 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
"Node %d Active(file): %8lu kB\n"
"Node %d Inactive(file): %8lu kB\n"
"Node %d Unevictable: %8lu kB\n"
- "Node %d Mlocked: %8lu kB\n"
+ "Node %d Mlocked: %8lu kB\n",
+ nid, K(i.totalram),
+ nid, K(i.freeram),
+ nid, K(i.totalram - i.freeram),
+ nid, K(node_page_state(nid, NR_ACTIVE_ANON) +
+ node_page_state(nid, NR_ACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_INACTIVE_ANON) +
+ node_page_state(nid, NR_INACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_ACTIVE_ANON)),
+ nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
+ nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_UNEVICTABLE)),
+ nid, K(node_page_state(nid, NR_MLOCK)));
+
#ifdef CONFIG_HIGHMEM
+ n += sprintf(buf,
"Node %d HighTotal: %8lu kB\n"
"Node %d HighFree: %8lu kB\n"
"Node %d LowTotal: %8lu kB\n"
- "Node %d LowFree: %8lu kB\n"
+ "Node %d LowFree: %8lu kB\n",
+ nid, K(i.totalhigh),
+ nid, K(i.freehigh),
+ nid, K(i.totalram - i.totalhigh),
+ nid, K(i.freeram - i.freehigh));
#endif
+ n += sprintf(buf,
"Node %d Dirty: %8lu kB\n"
"Node %d Writeback: %8lu kB\n"
"Node %d FilePages: %8lu kB\n"
@@ -99,25 +118,6 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
"Node %d Slab: %8lu kB\n"
"Node %d SReclaimable: %8lu kB\n"
"Node %d SUnreclaim: %8lu kB\n",
- nid, K(i.totalram),
- nid, K(i.freeram),
- nid, K(i.totalram - i.freeram),
- nid, K(node_page_state(nid, NR_ACTIVE_ANON) +
- node_page_state(nid, NR_ACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_INACTIVE_ANON) +
- node_page_state(nid, NR_INACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_ACTIVE_ANON)),
- nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
- nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_UNEVICTABLE)),
- nid, K(node_page_state(nid, NR_MLOCK)),
-#ifdef CONFIG_HIGHMEM
- nid, K(i.totalhigh),
- nid, K(i.freehigh),
- nid, K(i.totalram - i.totalhigh),
- nid, K(i.freeram - i.freehigh),
-#endif
nid, K(node_page_state(nid, NR_FILE_DIRTY)),
nid, K(node_page_state(nid, NR_WRITEBACK)),
nid, K(node_page_state(nid, NR_FILE_PAGES)),
--
1.6.5.2
WARNING: multiple messages have this Message-ID (diff)
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
To: LKML <linux-kernel@vger.kernel.org>,
linux-mm <linux-mm@kvack.org>,
Andrew Morton <akpm@linux-foundation.org>
Cc: kosaki.motohiro@jp.fujitsu.com
Subject: [PATCH] reduce stack usage of node_read_meminfo()
Date: Thu, 8 Jul 2010 18:20:14 +0900 (JST) [thread overview]
Message-ID: <20100708181629.CD3C.A69D9226@jp.fujitsu.com> (raw)
Now, cmpilation node_read_meminfo() output following warning. Because
it has very large sprintf() argument.
drivers/base/node.c: In function 'node_read_meminfo':
drivers/base/node.c:139: warning: the frame size of 848 bytes is
larger than 512 bytes
This patch fixes it by splitting sprintf() in three parts.
It doesn't have functional change.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
---
drivers/base/node.c | 46 +++++++++++++++++++++++-----------------------
1 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 2bdd8a9..a0fb2ef 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -66,8 +66,7 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
struct sysinfo i;
si_meminfo_node(&i, nid);
-
- n = sprintf(buf, "\n"
+ n = sprintf(buf,
"Node %d MemTotal: %8lu kB\n"
"Node %d MemFree: %8lu kB\n"
"Node %d MemUsed: %8lu kB\n"
@@ -78,13 +77,33 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
"Node %d Active(file): %8lu kB\n"
"Node %d Inactive(file): %8lu kB\n"
"Node %d Unevictable: %8lu kB\n"
- "Node %d Mlocked: %8lu kB\n"
+ "Node %d Mlocked: %8lu kB\n",
+ nid, K(i.totalram),
+ nid, K(i.freeram),
+ nid, K(i.totalram - i.freeram),
+ nid, K(node_page_state(nid, NR_ACTIVE_ANON) +
+ node_page_state(nid, NR_ACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_INACTIVE_ANON) +
+ node_page_state(nid, NR_INACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_ACTIVE_ANON)),
+ nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
+ nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
+ nid, K(node_page_state(nid, NR_UNEVICTABLE)),
+ nid, K(node_page_state(nid, NR_MLOCK)));
+
#ifdef CONFIG_HIGHMEM
+ n += sprintf(buf,
"Node %d HighTotal: %8lu kB\n"
"Node %d HighFree: %8lu kB\n"
"Node %d LowTotal: %8lu kB\n"
- "Node %d LowFree: %8lu kB\n"
+ "Node %d LowFree: %8lu kB\n",
+ nid, K(i.totalhigh),
+ nid, K(i.freehigh),
+ nid, K(i.totalram - i.totalhigh),
+ nid, K(i.freeram - i.freehigh));
#endif
+ n += sprintf(buf,
"Node %d Dirty: %8lu kB\n"
"Node %d Writeback: %8lu kB\n"
"Node %d FilePages: %8lu kB\n"
@@ -99,25 +118,6 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
"Node %d Slab: %8lu kB\n"
"Node %d SReclaimable: %8lu kB\n"
"Node %d SUnreclaim: %8lu kB\n",
- nid, K(i.totalram),
- nid, K(i.freeram),
- nid, K(i.totalram - i.freeram),
- nid, K(node_page_state(nid, NR_ACTIVE_ANON) +
- node_page_state(nid, NR_ACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_INACTIVE_ANON) +
- node_page_state(nid, NR_INACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_ACTIVE_ANON)),
- nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
- nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
- nid, K(node_page_state(nid, NR_UNEVICTABLE)),
- nid, K(node_page_state(nid, NR_MLOCK)),
-#ifdef CONFIG_HIGHMEM
- nid, K(i.totalhigh),
- nid, K(i.freehigh),
- nid, K(i.totalram - i.totalhigh),
- nid, K(i.freeram - i.freehigh),
-#endif
nid, K(node_page_state(nid, NR_FILE_DIRTY)),
nid, K(node_page_state(nid, NR_WRITEBACK)),
nid, K(node_page_state(nid, NR_FILE_PAGES)),
--
1.6.5.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2010-07-08 9:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-08 9:20 KOSAKI Motohiro [this message]
2010-07-08 9:20 ` [PATCH] reduce stack usage of node_read_meminfo() KOSAKI Motohiro
2010-07-08 10:41 ` KOSAKI Motohiro
2010-07-08 10:41 ` KOSAKI Motohiro
2010-07-08 20:59 ` Andrew Morton
2010-07-08 20:59 ` Andrew Morton
2010-07-08 20:58 ` Andrew Morton
2010-07-08 20:58 ` Andrew Morton
2010-07-09 0:14 ` KOSAKI Motohiro
2010-07-09 0:14 ` KOSAKI Motohiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100708181629.CD3C.A69D9226@jp.fujitsu.com \
--to=kosaki.motohiro@jp.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.