From: broonie@opensource.wolfsonmicro.com (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ux500: add ab8500-regulators machine specific data
Date: Tue, 13 Jul 2010 21:38:52 +0100 [thread overview]
Message-ID: <20100713203852.GA1756@rakim.wolfsonmicro.main> (raw)
In-Reply-To: <20100713161343.GA25342@bnru01.bnr.st.com>
On Tue, Jul 13, 2010 at 09:43:44PM +0530, Sundar R IYER wrote:
> Subject: [PATCH v3 2/2] ux500: add ab8500-regulators machine specific data
> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
> Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com>
> +static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
> +};
You may as well just remove these if they're not used but still...
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
One other thing...
> +struct regulator_init_data ab8500_vaudio_init = {
> + .supply_regulator_dev = NULL,
> + .constraints = {
> + .name = "ab8500-vaudio",
> + .min_uV = 1925000,
> + .max_uV = 2075000,
Are you *sure* that all these constraints are accurate for the board?
It seems every single voltage is variable even though there are no
consumers set up, and they can all be disabled too.
WARNING: multiple messages have this Message-ID (diff)
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Sundar R IYER <sundar.iyer@stericsson.com>
Cc: "lrg@slimlogic.co.uk" <lrg@slimlogic.co.uk>,
"sameo@linux.intel.com" <sameo@linux.intel.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
STEricsson_nomadik_linux <STEricsson_nomadik_linux@list.st.com>,
Linus WALLEIJ <linus.walleij@stericsson.com>,
Bengt JONSSON <bengt.g.jonsson@stericsson.com>
Subject: Re: [PATCH v2 2/2] ux500: add ab8500-regulators machine specific data
Date: Tue, 13 Jul 2010 21:38:52 +0100 [thread overview]
Message-ID: <20100713203852.GA1756@rakim.wolfsonmicro.main> (raw)
In-Reply-To: <20100713161343.GA25342@bnru01.bnr.st.com>
On Tue, Jul 13, 2010 at 09:43:44PM +0530, Sundar R IYER wrote:
> Subject: [PATCH v3 2/2] ux500: add ab8500-regulators machine specific data
> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
> Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com>
> +static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
> +};
You may as well just remove these if they're not used but still...
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
One other thing...
> +struct regulator_init_data ab8500_vaudio_init = {
> + .supply_regulator_dev = NULL,
> + .constraints = {
> + .name = "ab8500-vaudio",
> + .min_uV = 1925000,
> + .max_uV = 2075000,
Are you *sure* that all these constraints are accurate for the board?
It seems every single voltage is variable even though there are no
consumers set up, and they can all be disabled too.
next prev parent reply other threads:[~2010-07-13 20:38 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-13 14:09 [PATCH v2 1/2] regulator: add support for regulators on the ab8500 MFD Sundar Iyer
2010-07-13 14:09 ` Sundar Iyer
2010-07-13 14:09 ` [PATCH v2 2/2] ux500: add ab8500-regulators machine specific data Sundar Iyer
2010-07-13 14:09 ` Sundar Iyer
2010-07-13 14:18 ` Mark Brown
2010-07-13 14:18 ` Mark Brown
2010-07-13 14:41 ` Sundar R IYER
2010-07-13 14:41 ` Sundar R IYER
2010-07-13 14:56 ` Mark Brown
2010-07-13 14:56 ` Mark Brown
2010-07-13 15:08 ` Sundar R IYER
2010-07-13 15:08 ` Sundar R IYER
2010-07-13 15:09 ` Mark Brown
2010-07-13 15:09 ` Mark Brown
2010-07-13 16:13 ` Sundar R IYER
2010-07-13 16:13 ` Sundar R IYER
2010-07-13 20:38 ` Mark Brown [this message]
2010-07-13 20:38 ` Mark Brown
2010-07-14 14:50 ` Sundar R IYER
2010-07-14 14:50 ` Sundar R IYER
2010-07-14 14:57 ` Mark Brown
2010-07-14 14:57 ` Mark Brown
2010-07-14 15:36 ` Sundar R IYER
2010-07-14 15:36 ` Sundar R IYER
2010-07-14 15:47 ` Mark Brown
2010-07-14 15:47 ` Mark Brown
2010-07-14 16:09 ` Sundar R IYER
2010-07-14 16:09 ` Sundar R IYER
2010-07-14 16:20 ` Mark Brown
2010-07-14 16:20 ` Mark Brown
2010-07-14 16:47 ` Sundar R IYER
2010-07-14 16:47 ` Sundar R IYER
2010-07-14 17:03 ` Mark Brown
2010-07-14 17:03 ` Mark Brown
2010-07-14 17:36 ` Sundar R IYER
2010-07-14 17:36 ` Sundar R IYER
2010-07-14 18:42 ` Mark Brown
2010-07-14 18:42 ` Mark Brown
2010-07-14 22:51 ` Linus Walleij
2010-07-14 22:51 ` Linus Walleij
2010-07-15 9:09 ` Mark Brown
2010-07-15 9:09 ` Mark Brown
2010-07-13 14:17 ` [PATCH v2 1/2] regulator: add support for regulators on the ab8500 MFD Mark Brown
2010-07-13 14:17 ` Mark Brown
2010-07-13 14:34 ` Sundar R IYER
2010-07-13 14:34 ` Sundar R IYER
2010-07-13 14:57 ` Mark Brown
2010-07-13 14:57 ` Mark Brown
2010-07-13 14:58 ` Mark Brown
2010-07-13 14:58 ` Mark Brown
2010-07-13 15:11 ` Sundar R IYER
2010-07-13 15:11 ` Sundar R IYER
2010-07-13 15:12 ` Mark Brown
2010-07-13 15:12 ` Mark Brown
2010-07-13 16:18 ` Sundar R IYER
2010-07-13 16:18 ` Sundar R IYER
2010-07-13 20:40 ` Mark Brown
2010-07-13 20:40 ` Mark Brown
2010-07-15 10:29 ` Liam Girdwood
2010-07-15 10:29 ` Liam Girdwood
2010-10-27 16:25 ` Thiago Farina
2010-10-27 16:25 ` Thiago Farina
2010-10-27 17:33 ` Mark Brown
2010-10-27 17:33 ` Mark Brown
2010-10-27 17:42 ` Thiago Farina
2010-10-27 17:42 ` Thiago Farina
2010-10-27 17:56 ` Mark Brown
2010-10-27 17:56 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100713203852.GA1756@rakim.wolfsonmicro.main \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.