All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Huewe <PeterHuewe@gmx.de>
To: Kernel Janitors <kernel-janitors@vger.kernel.org>
Cc: "Jens Axboe" <jens.axboe@oracle.com>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Márton Németh" <nm127@freemail.hu>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	"Alexey Dobriyan" <adobriyan@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 11/25] block: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
Date: Thu, 15 Jul 2010 18:51:17 +0000	[thread overview]
Message-ID: <201007152051.18189.PeterHuewe@gmx.de> (raw)

From: Peter Huewe <peterhuewe@gmx.de>

This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
---
 drivers/block/sx8.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index b70f0fc..15745e4 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -410,8 +410,8 @@ static void carm_remove_one (struct pci_dev *pdev);
 static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
 static const struct pci_device_id carm_pci_tbl[] = {
-	{ PCI_VENDOR_ID_PROMISE, 0x8000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
-	{ PCI_VENDOR_ID_PROMISE, 0x8002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VDEVICE(PROMISE, 0x8000), },
+	{ PCI_VDEVICE(PROMISE, 0x8002), },
 	{ }	/* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, carm_pci_tbl);
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: Peter Huewe <PeterHuewe@gmx.de>
To: Kernel Janitors <kernel-janitors@vger.kernel.org>
Cc: "Jens Axboe" <jens.axboe@oracle.com>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	" Márton Németh" <nm127@freemail.hu>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	"Alexey Dobriyan" <adobriyan@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 11/25] block: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
Date: Thu, 15 Jul 2010 20:51:17 +0200	[thread overview]
Message-ID: <201007152051.18189.PeterHuewe@gmx.de> (raw)

From: Peter Huewe <peterhuewe@gmx.de>

This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
---
 drivers/block/sx8.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index b70f0fc..15745e4 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -410,8 +410,8 @@ static void carm_remove_one (struct pci_dev *pdev);
 static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
 static const struct pci_device_id carm_pci_tbl[] = {
-	{ PCI_VENDOR_ID_PROMISE, 0x8000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
-	{ PCI_VENDOR_ID_PROMISE, 0x8002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VDEVICE(PROMISE, 0x8000), },
+	{ PCI_VDEVICE(PROMISE, 0x8002), },
 	{ }	/* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, carm_pci_tbl);
-- 
1.7.1


             reply	other threads:[~2010-07-15 18:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-15 18:51 Peter Huewe [this message]
2010-07-15 18:51 ` [PATCH 11/25] block: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) Peter Huewe
2010-07-15 19:03 ` [PATCH 11/25] block: Convert pci_table entries to PCI_VDEVICE Alexey Dobriyan
2010-07-15 19:03   ` [PATCH 11/25] block: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) Alexey Dobriyan
2010-07-16  0:51   ` [PATCH 11/25] block: Convert pci_table entries to PCI_VDEVICE Jeff Garzik
2010-07-16  0:51     ` [PATCH 11/25] block: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201007152051.18189.PeterHuewe@gmx.de \
    --to=peterhuewe@gmx.de \
    --cc=adobriyan@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=jens.axboe@oracle.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=nm127@freemail.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.