[PATCH v4 0/4] s3c24xx: iPAQ rx1950 series

[PATCH v4 0/4] s3c24xx: iPAQ rx1950 series

[Vasily Khoruzhick]

This patch series adds more support for iPAQ rx1950 PDA to linux:
1. LEDs driver -- it controls blue, green and red LEDs on rx1950
2. Battery driver -- adds ability to monitor and charge battery.
This driver is suitable for H1940 PDA aswell (just need to write
some machine specific callbacks and get voltage LUTs)

v2: removed ac registration from s3c_adc_battery driver, use
pda_power instead for ac support

v3: split LEDs patch to driver and machine parts,
split battery patch into battery + LED trigger parts,
now battery driver can skip gpio/callbacks usage
(if there's no gpio pin to determine that battery is
full or if charger is enabled automatically)

v4: add .blink_set callback to LEDs driver instead of
using LED_HALF value for blinking, remove LED triggers
from battery driver completely (for now)

[PATCH v4 1/4] Add HP iPAQ rx1950 LEDs driver

[Vasily Khoruzhick]

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 drivers/leds/Kconfig       |    6 +
 drivers/leds/Makefile      |    1 +
 drivers/leds/leds-rx1950.c |  242 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 249 insertions(+), 0 deletions(-)
 create mode 100644 drivers/leds/leds-rx1950.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 81bf25e..f986825 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -102,6 +102,12 @@ config LEDS_H1940
 	help
 	  This option enables support for the LEDs on the h1940.
 
+config LEDS_RX1950
+	tristate "LED Support for iPAQ RX1950 device"
+	depends on MACH_RX1950
+	help
+	  This option enables support for the LEDs on the rx1950.
+
 config LEDS_COBALT_QUBE
 	tristate "LED Support for the Cobalt Qube series front LED"
 	depends on MIPS_COBALT
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2493de4..faa0d5d 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_NET5501)		+= leds-net5501.o
 obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
 obj-$(CONFIG_LEDS_ALIX2)		+= leds-alix2.o
 obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
+obj-$(CONFIG_LEDS_RX1950)		+= leds-rx1950.o
 obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
 obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
diff --git a/drivers/leds/leds-rx1950.c b/drivers/leds/leds-rx1950.c
new file mode 100644
index 0000000..0e9633b
--- /dev/null
+++ b/drivers/leds/leds-rx1950.c
@@ -0,0 +1,242 @@
+/*
+ * drivers/leds/leds-rx1950.c
+ *
+ * Based on leds-h1940 by Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Copyright (c) Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * RX1950 leds driver
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/hardware.h>
+
+/*
+ * Green led.
+ */
+static void rx1950_greenled_set(struct led_classdev *led_dev,
+			       enum led_brightness value)
+{
+	if (value) {
+		if (!gpio_get_value(S3C2410_GPJ(6))) {
+			gpio_direction_output(S3C2410_GPA(4), 0);
+			gpio_direction_output(S3C2410_GPA(6), 1);
+			gpio_direction_output(S3C2410_GPJ(6), 0);
+		} else {
+			gpio_direction_output(S3C2410_GPA(4), 1);
+			gpio_direction_output(S3C2410_GPA(6), 0);
+			gpio_direction_output(S3C2410_GPJ(6), 1);
+		}
+	} else {
+		gpio_direction_output(S3C2410_GPA(4), 0);
+		gpio_direction_output(S3C2410_GPA(6), 0);
+		gpio_direction_output(S3C2410_GPJ(6), 0);
+	}
+}
+
+static int rx1950_greenled_blink_set(struct led_classdev *led_cdev,
+					unsigned long *delay_on,
+					unsigned long *delay_off)
+{
+	if (*delay_on == 0 && *delay_off == 0) {
+		*delay_on = 300;
+		*delay_off = 700;
+	}
+
+	if (*delay_on != 300 && *delay_on != 700)
+		return -EINVAL;
+
+	gpio_direction_output(S3C2410_GPA(4), 1);
+	gpio_direction_output(S3C2410_GPA(6), 0);
+	gpio_direction_output(S3C2410_GPJ(6), 1);
+
+	return 0;
+}
+
+static struct led_classdev rx1950_greenled = {
+	.name				= "rx1950:green",
+	.brightness_set		= rx1950_greenled_set,
+	.blink_set			= rx1950_greenled_blink_set,
+	.default_trigger	= "main-battery-charging-or-full",
+};
+
+/*
+ * Red led.
+ */
+static void rx1950_redled_set(struct led_classdev *led_dev,
+					 enum led_brightness value)
+{
+	if (value) {
+		if (!gpio_get_value(S3C2410_GPJ(6))) {
+			gpio_direction_output(S3C2410_GPA(3), 0);
+			gpio_direction_output(S3C2410_GPA(7), 1);
+			gpio_direction_output(S3C2410_GPJ(6), 0);
+		} else {
+			gpio_direction_output(S3C2410_GPA(3), 1);
+			gpio_direction_output(S3C2410_GPA(7), 0);
+			gpio_direction_output(S3C2410_GPJ(6), 1);
+		}
+	} else {
+		gpio_direction_output(S3C2410_GPA(3), 0);
+		gpio_direction_output(S3C2410_GPA(7), 0);
+		gpio_direction_output(S3C2410_GPJ(6), 0);
+	}
+}
+
+static int rx1950_redled_blink_set(struct led_classdev *led_cdev,
+					unsigned long *delay_on,
+					unsigned long *delay_off)
+{
+	if (*delay_on == 0 && *delay_off == 0) {
+		*delay_on = 300;
+		*delay_off = 700;
+	}
+
+	if (*delay_on != 300 && *delay_on != 700)
+		return -EINVAL;
+
+	gpio_direction_output(S3C2410_GPA(3), 1);
+	gpio_direction_output(S3C2410_GPA(7), 0);
+	gpio_direction_output(S3C2410_GPJ(6), 1);
+
+	return 0;
+}
+
+static struct led_classdev rx1950_redled = {
+	.name				= "rx1950:red",
+	.brightness_set		= rx1950_redled_set,
+	.blink_set			= rx1950_redled_blink_set,
+	.default_trigger	= "main-battery-full",
+};
+
+/*
+ * Blue led.
+ */
+static void rx1950_blueled_set(struct led_classdev *led_dev,
+			      enum led_brightness value)
+{
+	if (value)
+		gpio_direction_output(S3C2410_GPA(11), 1);
+	else
+		gpio_direction_output(S3C2410_GPA(11), 0);
+}
+
+static struct led_classdev rx1950_blueled = {
+	.name			= "rx1950:blue",
+	.brightness_set		= rx1950_blueled_set,
+	.default_trigger	= "rx1950-acx-mem",
+};
+
+static int __devinit rx1950leds_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = gpio_request(S3C2410_GPA(3), "rx1950:red_led_blink");
+	if (ret)
+		goto err_blink_red;
+
+	ret = gpio_request(S3C2410_GPA(4), "rx1950:green_led_blink");
+	if (ret)
+		goto err_blink_green;
+
+	ret = gpio_request(S3C2410_GPJ(6), "rx1950:led_blink");
+	if (ret)
+		goto err_blink;
+
+	ret = gpio_request(S3C2410_GPA(6), "rx1950:green_led");
+	if (ret)
+		goto err_green;
+	ret = led_classdev_register(&pdev->dev, &rx1950_greenled);
+	if (ret)
+		goto err_green_gpio;
+
+	ret = gpio_request(S3C2410_GPA(7), "rx1950:red_led");
+	if (ret)
+		goto err_red;
+	ret = led_classdev_register(&pdev->dev, &rx1950_redled);
+	if (ret)
+		goto err_red_gpio;
+
+	ret = gpio_request(S3C2410_GPA(11), "rx1950:blue_led");
+	if (ret)
+		goto err_blue;
+	ret = led_classdev_register(&pdev->dev, &rx1950_blueled);
+	if (ret)
+		goto err_blue_gpio;
+
+	return 0;
+
+err_blue_gpio:
+	gpio_free(S3C2410_GPA(11));
+err_blue:
+	led_classdev_unregister(&rx1950_redled);
+err_red_gpio:
+	gpio_free(S3C2410_GPA(6));
+err_red:
+	led_classdev_unregister(&rx1950_greenled);
+err_green_gpio:
+	gpio_free(S3C2410_GPA7);
+err_green:
+	gpio_free(S3C2410_GPJ(6));
+err_blink:
+	gpio_free(S3C2410_GPA(4));
+err_blink_green:
+	gpio_free(S3C2410_GPA(3));
+err_blink_red:
+	return ret;
+}
+
+static int rx1950leds_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&rx1950_greenled);
+	led_classdev_unregister(&rx1950_redled);
+	led_classdev_unregister(&rx1950_blueled);
+	gpio_free(S3C2410_GPA(11));
+	gpio_free(S3C2410_GPA(6));
+	gpio_free(S3C2410_GPA(7));
+	gpio_free(S3C2410_GPJ(6));
+	gpio_free(S3C2410_GPA(3));
+	gpio_free(S3C2410_GPA(4));
+	return 0;
+}
+
+
+static struct platform_driver rx1950leds_driver = {
+	.driver		= {
+		.name	= "rx1950-leds",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= rx1950leds_probe,
+	.remove		= rx1950leds_remove,
+};
+
+
+static int __init rx1950leds_init(void)
+{
+	return platform_driver_register(&rx1950leds_driver);
+}
+
+static void __exit rx1950leds_exit(void)
+{
+	platform_driver_unregister(&rx1950leds_driver);
+}
+
+module_init(rx1950leds_init);
+module_exit(rx1950leds_exit);
+
+MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
+MODULE_DESCRIPTION("LED driver for the iPAQ RX1950");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rx1950-leds");
-- 
1.7.1.1

[PATCH v4 2/4] rx1950: add LEDs device

[Vasily Khoruzhick]

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 arch/arm/mach-s3c2440/mach-rx1950.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 8603b57..55b806a 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -126,6 +126,11 @@ static struct s3c2410fb_display rx1950_display = {
 
 };
 
+static struct platform_device rx1950_device_leds = {
+	.name             = "rx1950-leds",
+	.id               = -1,
+};
+
 static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 	.displays = &rx1950_display,
 	.num_displays = 1,
@@ -502,6 +507,7 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&s3c_device_timer[1],
 	&rx1950_backlight,
 	&rx1950_device_gpiokeys,
+	&rx1950_device_leds,
 };
 
 static struct clk *rx1950_clocks[] __initdata = {
-- 
1.7.1.1

[PATCH v4 3/4] Add s3c-adc-battery driver

[Vasily Khoruzhick]

s3c-adc-battery is driver for monitoring
and charging battery on iPAQ H1930/H1940/RX1950.
It depends on s3c-adc driver to get battery voltage and current.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 drivers/power/Kconfig           |    6 +
 drivers/power/Makefile          |    1 +
 drivers/power/s3c_adc_battery.c |  426 +++++++++++++++++++++++++++++++++++++++
 include/linux/s3c_adc_battery.h |   36 ++++
 4 files changed, 469 insertions(+), 0 deletions(-)
 create mode 100644 drivers/power/s3c_adc_battery.c
 create mode 100644 include/linux/s3c_adc_battery.h

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 8e9ba17..645baa5 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -136,6 +136,12 @@ config BATTERY_Z2
 	help
 	  Say Y to include support for the battery on the Zipit Z2.
 
+config BATTERY_S3C_ADC
+	tristate "Battery driver for Samsung ADC based monitoring"
+	depends on S3C_ADC
+	help
+	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
 config CHARGER_PCF50633
 	tristate "NXP PCF50633 MBC"
 	depends on MFD_PCF50633
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 0005080..166bcbf 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -33,4 +33,5 @@ obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
+obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c
new file mode 100644
index 0000000..4eb05ab
--- /dev/null
+++ b/drivers/power/s3c_adc_battery.c
@@ -0,0 +1,426 @@
+/*
+ *	iPAQ h1930/h1940/rx1950 battery controler driver
+ *	Copyright (c) Vasily Khoruzhick
+ *	Based on h1940_battery.c by Arnaud Patard
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <plat/adc.h>
+
+#define BAT_POLL_INTERVAL			10000 /* ms */
+#define JITTER_DELAY				500 /* ms */
+
+struct s3c_adc_bat {
+	struct power_supply			psy;
+	struct s3c_adc_client		*client;
+	struct s3c_adc_bat_pdata	*pdata;
+	int							volt_value;
+	int							cur_value;
+	unsigned int				timestamp;
+	int							level;
+	int							status;
+	int							cable_plugged:1;
+};
+
+static struct delayed_work bat_work;
+
+static void s3c_adc_bat_ext_power_changed(struct power_supply *psy)
+{
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+}
+
+static enum power_supply_property s3c_adc_backup_bat_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+static int s3c_adc_backup_bat_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy);
+
+	if (!bat) {
+		dev_err(psy->dev, "%s: no battery infos ?!\n", __func__);
+		return -EINVAL;
+	}
+
+	if (bat->volt_value < 0 ||
+		jiffies_to_msecs(jiffies - bat->timestamp) >
+			BAT_POLL_INTERVAL) {
+		bat->volt_value = s3c_adc_read(bat->client,
+			bat->pdata->backup_volt_channel);
+		bat->volt_value *= bat->pdata->backup_volt_mult;
+		bat->timestamp = jiffies;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = bat->volt_value;
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		val->intval = bat->pdata->backup_volt_min;
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->pdata->backup_volt_max;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct s3c_adc_bat backup_bat = {
+	.psy = {
+		.name		= "backup-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= s3c_adc_backup_bat_props,
+		.num_properties = ARRAY_SIZE(s3c_adc_backup_bat_props),
+		.get_property	= s3c_adc_backup_bat_get_property,
+		.use_for_apm	= 1,
+	},
+};
+
+static enum power_supply_property s3c_adc_main_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int calc_full_volt(int volt_val, int cur_val, int impedance)
+{
+	return volt_val + cur_val * impedance / 1000;
+}
+
+static int s3c_adc_bat_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy);
+
+	int new_level;
+	int full_volt;
+	const struct s3c_adc_bat_thresh *lut = bat->pdata->lut_noac;
+	unsigned int lut_size = bat->pdata->lut_noac_cnt;
+
+	if (!bat) {
+		dev_err(psy->dev, "no battery infos ?!\n");
+		return -EINVAL;
+	}
+
+	if (bat->volt_value < 0 || bat->cur_value < 0 ||
+		jiffies_to_msecs(jiffies - bat->timestamp) >
+			BAT_POLL_INTERVAL) {
+		bat->volt_value = s3c_adc_read(bat->client,
+			bat->pdata->volt_channel) * bat->pdata->volt_mult;
+		bat->cur_value = s3c_adc_read(bat->client,
+			bat->pdata->current_channel) * bat->pdata->current_mult;
+		bat->timestamp = jiffies;
+	}
+
+	new_level = 100000;
+	full_volt = calc_full_volt((bat->volt_value / 1000),
+		(bat->cur_value / 1000), bat->pdata->internal_impedance);
+
+	if (full_volt < calc_full_volt(lut->volt, lut->cur,
+		bat->pdata->internal_impedance)) {
+		lut_size--;
+		while (lut_size--) {
+			int lut_volt1;
+			int lut_volt2;
+
+			lut_volt1 = calc_full_volt(lut[0].volt, lut[0].cur,
+				bat->pdata->internal_impedance);
+			lut_volt2 = calc_full_volt(lut[1].volt, lut[1].cur,
+				bat->pdata->internal_impedance);
+			if (full_volt < lut_volt1 && full_volt >= lut_volt2) {
+				new_level = (lut[1].level +
+					(lut[0].level - lut[1].level) *
+					(full_volt - lut_volt2) /
+					(lut_volt1 - lut_volt2)) * 1000;
+				break;
+			}
+			new_level = lut[1].level * 1000;
+			lut++;
+		}
+	}
+
+	bat->level = new_level;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (bat->pdata->gpio_charge_finished < 0)
+			val->intval = bat->level == 100000 ?
+				POWER_SUPPLY_STATUS_FULL : bat->status;
+		else
+			val->intval = bat->status;
+		return 0;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = 100000;
+		return 0;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+		val->intval = 0;
+		return 0;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = bat->level;
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = bat->volt_value;
+		return 0;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = bat->cur_value;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct s3c_adc_bat main_bat = {
+	.psy = {
+		.name				= "main-battery",
+		.type				= POWER_SUPPLY_TYPE_BATTERY,
+		.properties			= s3c_adc_main_bat_props,
+		.num_properties		= ARRAY_SIZE(s3c_adc_main_bat_props),
+		.get_property		= s3c_adc_bat_get_property,
+		.external_power_changed = s3c_adc_bat_ext_power_changed,
+		.use_for_apm	= 1,
+	},
+};
+
+static void s3c_adc_bat_work(struct work_struct *work)
+{
+	struct s3c_adc_bat *bat = &main_bat;
+	int is_charged;
+	int is_plugged;
+	static int was_plugged;
+
+	is_plugged = power_supply_am_i_supplied(&bat->psy);
+	bat->cable_plugged = is_plugged;
+	if (is_plugged != was_plugged) {
+		was_plugged = is_plugged;
+		if (is_plugged) {
+			if (bat->pdata->enable_charger)
+				bat->pdata->enable_charger();
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		} else {
+			if (bat->pdata->disable_charger)
+				bat->pdata->disable_charger();
+			bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+		}
+	} else {
+		if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) {
+			is_charged = gpio_get_value(
+				main_bat.pdata->gpio_charge_finished);
+			if (is_charged) {
+				if (bat->pdata->disable_charger)
+					bat->pdata->disable_charger();
+				bat->status = POWER_SUPPLY_STATUS_FULL;
+			} else {
+				if (bat->pdata->enable_charger)
+					bat->pdata->enable_charger();
+				bat->status = POWER_SUPPLY_STATUS_CHARGING;
+			}
+		}
+	}
+
+	power_supply_changed(&bat->psy);
+}
+
+static irqreturn_t s3c_adc_bat_charged(int irq, void *dev_id)
+{
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+	return IRQ_HANDLED;
+}
+
+static int __init s3c_adc_bat_probe(struct platform_device *pdev)
+{
+	struct s3c_adc_client	*client;
+	struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+	int ret;
+
+	client = s3c_adc_register(pdev, NULL, NULL, 0);
+	if (IS_ERR(client)) {
+		dev_err(&pdev->dev, "cannot register adc\n");
+		return PTR_ERR(client);
+	}
+
+	platform_set_drvdata(pdev, client);
+
+	main_bat.client = client;
+	main_bat.pdata = pdata;
+	main_bat.volt_value = -1;
+	main_bat.cur_value = -1;
+	main_bat.cable_plugged = 0;
+	main_bat.status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	ret = power_supply_register(&pdev->dev, &main_bat.psy);
+	if (ret)
+		goto err_reg_main;
+	if (pdata->backup_volt_mult) {
+		backup_bat.client = client;
+		backup_bat.pdata = pdev->dev.platform_data;
+		backup_bat.volt_value = -1;
+		ret = power_supply_register(&pdev->dev, &backup_bat.psy);
+		if (ret)
+			goto err_reg_backup;
+	}
+
+	INIT_DELAYED_WORK(&bat_work, s3c_adc_bat_work);
+
+	if (pdata->gpio_charge_finished >= 0) {
+		ret = gpio_request(pdata->gpio_charge_finished, "charged");
+		if (ret)
+			goto err_gpio;
+
+		ret = request_irq(gpio_to_irq(pdata->gpio_charge_finished),
+				s3c_adc_bat_charged,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"battery charged", NULL);
+		if (ret)
+			goto err_irq;
+	}
+
+	if (pdata->init) {
+		ret = pdata->init();
+		if (ret)
+			goto err_platform;
+	}
+
+	dev_info(&pdev->dev, "successfully loaded\n");
+	device_init_wakeup(&pdev->dev, 1);
+
+	/* Schedule timer to check current status */
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+
+	return 0;
+
+err_platform:
+	if (pdata->gpio_charge_finished >= 0)
+		free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL);
+err_irq:
+	if (pdata->gpio_charge_finished >= 0)
+		gpio_free(pdata->gpio_charge_finished);
+err_gpio:
+	if (pdata->backup_volt_mult)
+		power_supply_unregister(&backup_bat.psy);
+err_reg_backup:
+	power_supply_unregister(&main_bat.psy);
+err_reg_main:
+	return ret;
+}
+
+static int s3c_adc_bat_remove(struct platform_device *pdev)
+{
+	struct s3c_adc_client *client = platform_get_drvdata(pdev);
+	struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+	power_supply_unregister(&main_bat.psy);
+	if (pdata->backup_volt_mult)
+		power_supply_unregister(&backup_bat.psy);
+
+	s3c_adc_release(client);
+
+	if (pdata->gpio_charge_finished >= 0) {
+		free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL);
+		gpio_free(pdata->gpio_charge_finished);
+	}
+
+	cancel_delayed_work(&bat_work);
+
+	if (pdata->exit)
+		pdata->exit();
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_bat_suspend(struct platform_device *pdev,
+	pm_message_t state)
+{
+	struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+	if (pdata->gpio_charge_finished >= 0) {
+		if (device_may_wakeup(&pdev->dev))
+			enable_irq_wake(
+				gpio_to_irq(pdata->gpio_charge_finished));
+		else {
+			disable_irq(gpio_to_irq(pdata->gpio_charge_finished));
+			main_bat.pdata->disable_charger();
+		}
+	}
+
+	return 0;
+}
+
+static int s3c_adc_bat_resume(struct platform_device *pdev)
+{
+	struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+	if (pdata->gpio_charge_finished >= 0) {
+		if (device_may_wakeup(&pdev->dev))
+			disable_irq_wake(
+				gpio_to_irq(pdata->gpio_charge_finished));
+		else
+			enable_irq(gpio_to_irq(pdata->gpio_charge_finished));
+	}
+
+	/* Schedule timer to check current status */
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+
+	return 0;
+}
+#else
+#define s3c_adc_battery_suspend NULL
+#define s3c_adc_battery_resume NULL
+#endif
+
+static struct platform_driver s3c_adc_bat_driver = {
+	.driver		= {
+		.name	= "s3c-adc-battery",
+	},
+	.probe		= s3c_adc_bat_probe,
+	.remove		= s3c_adc_bat_remove,
+	.suspend	= s3c_adc_bat_suspend,
+	.resume		= s3c_adc_bat_resume,
+};
+
+
+static int __init s3c_adc_bat_init(void)
+{
+	return platform_driver_register(&s3c_adc_bat_driver);
+}
+
+static void __exit s3c_adc_bat_exit(void)
+{
+	platform_driver_unregister(&s3c_adc_bat_driver);
+}
+
+module_init(s3c_adc_bat_init);
+module_exit(s3c_adc_bat_exit);
+
+MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
+MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controler driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/s3c_adc_battery.h b/include/linux/s3c_adc_battery.h
new file mode 100644
index 0000000..dbce22f
--- /dev/null
+++ b/include/linux/s3c_adc_battery.h
@@ -0,0 +1,36 @@
+#ifndef _S3C_ADC_BATTERY_H
+#define _S3C_ADC_BATTERY_H
+
+struct s3c_adc_bat_thresh {
+	int volt; /* mV */
+	int cur; /* mA */
+	int level; /* percent */
+};
+
+struct s3c_adc_bat_pdata {
+	int (*init)(void);
+	void (*exit)(void);
+	void (*enable_charger)(void);
+	void (*disable_charger)(void);
+
+	int gpio_charge_finished;
+
+	const struct s3c_adc_bat_thresh *lut_noac;
+	unsigned int lut_noac_cnt;
+	const struct s3c_adc_bat_thresh *lut_acin;
+	unsigned int lut_acin_cnt;
+
+	const unsigned int volt_channel;
+	const unsigned int current_channel;
+	const unsigned int backup_volt_channel;
+
+	const unsigned int volt_mult;
+	const unsigned int current_mult;
+	const unsigned int backup_volt_mult;
+	const unsigned int internal_impedance;
+
+	const unsigned int backup_volt_max;
+	const unsigned int backup_volt_min;
+};
+
+#endif
-- 
1.7.1.1

[PATCH v4 4/4] rx1950: add battery device

[Vasily Khoruzhick]

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 arch/arm/mach-s3c2440/Kconfig       |    3 +
 arch/arm/mach-s3c2440/mach-rx1950.c |  160 +++++++++++++++++++++++++++++++++++
 2 files changed, 163 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cd8e7de..9b6b026 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -198,6 +198,9 @@ config MACH_RX1950
 	select S3C_DEV_NAND
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
+	select S3C_ADC
+	select PDA_POWER
+	select BATTERY_S3C_ADC
 	help
 	   Say Y here if you're using HP iPAQ rx1950
 
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 55b806a..7342f36 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -24,8 +24,10 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/sysdev.h>
+#include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/pwm.h>
+#include <linux/s3c_adc_battery.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -131,6 +133,162 @@ static struct platform_device rx1950_device_leds = {
 	.id               = -1,
 };
 
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int rx1950_is_ac_online(void)
+{
+	return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(S3C2410_GPF(2));
+}
+
+static char *rx1950_supplicants[] = {
+	"main-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init				= power_supply_init,
+	.is_ac_online		= rx1950_is_ac_online,
+	.exit				= power_supply_exit,
+	.supplied_to		= rx1950_supplicants,
+	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = {
+			.name	= "ac",
+			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
+					  IORESOURCE_IRQ_HIGHEDGE,
+			.start	= IRQ_EINT2,
+			.end	= IRQ_EINT2,
+	},
+};
+
+static struct platform_device power_supply = {
+	.name			= "pda-power",
+	.id				= -1,
+	.dev			= {
+						.platform_data =
+							&power_supply_info,
+	},
+	.resource		= power_supply_resources,
+	.num_resources	= ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+	{4100, 156, 100},
+	{4050, 156, 95},
+	{4025, 141, 90},
+	{3995, 144, 85},
+	{3957, 162, 80},
+	{3931, 147, 75},
+	{3902, 147, 70},
+	{3863, 153, 65},
+	{3838, 150, 60},
+	{3800, 153, 55},
+	{3765, 153, 50},
+	{3748, 172, 45},
+	{3740, 153, 40},
+	{3714, 175, 35},
+	{3710, 156, 30},
+	{3963, 156, 25},
+	{3672, 178, 20},
+	{3651, 178, 15},
+	{3629, 178, 10},
+	{3612, 162, 5},
+	{3605, 162, 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+	{4200, 0, 100},
+	{4190, 0, 99},
+	{4178, 0, 95},
+	{4110, 0, 70},
+	{4076, 0, 65},
+	{4046, 0, 60},
+	{4021, 0, 55},
+	{3999, 0, 50},
+	{3982, 0, 45},
+	{3965, 0, 40},
+	{3957, 0, 35},
+	{3948, 0, 30},
+	{3936, 0, 25},
+	{3927, 0, 20},
+	{3906, 0, 15},
+	{3880, 0, 10},
+	{3829, 0, 5},
+	{3820, 0, 0},
+};
+
+int rx1950_bat_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
+	if (ret)
+		goto err_gpio1;
+	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
+	if (ret)
+		goto err_gpio2;
+
+	return 0;
+
+err_gpio2:
+	gpio_free(S3C2410_GPJ(2));
+err_gpio1:
+	return ret;
+}
+
+void rx1950_bat_exit(void)
+{
+	gpio_free(S3C2410_GPJ(2));
+	gpio_free(S3C2410_GPJ(3));
+}
+
+void rx1950_enable_charger(void)
+{
+	gpio_direction_output(S3C2410_GPJ(2), 1);
+	gpio_direction_output(S3C2410_GPJ(3), 1);
+}
+
+void rx1950_disable_charger(void)
+{
+	gpio_direction_output(S3C2410_GPJ(2), 0);
+	gpio_direction_output(S3C2410_GPJ(3), 0);
+}
+
+static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
+	.init = rx1950_bat_init,
+	.exit = rx1950_bat_exit,
+	.enable_charger = rx1950_enable_charger,
+	.disable_charger = rx1950_disable_charger,
+	.gpio_charge_finished = S3C2410_GPF(3),
+	.lut_noac = bat_lut_noac,
+	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+	.lut_acin = bat_lut_acin,
+	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+	.volt_channel = 0,
+	.current_channel = 1,
+	.volt_mult = 4235,
+	.current_mult = 2900,
+	.internal_impedance = 200,
+};
+
+static struct platform_device rx1950_battery = {
+	.name             = "s3c-adc-battery",
+	.id               = -1,
+	.dev = {
+		.parent = &s3c_device_adc.dev,
+		.platform_data = &rx1950_bat_cfg,
+	},
+};
+
 static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 	.displays = &rx1950_display,
 	.num_displays = 1,
@@ -508,6 +666,8 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&rx1950_backlight,
 	&rx1950_device_gpiokeys,
 	&rx1950_device_leds,
+	&power_supply,
+	&rx1950_battery,
 };
 
 static struct clk *rx1950_clocks[] __initdata = {
-- 
1.7.1.1

[PATCH v4 0/4] s3c24xx: iPAQ rx1950 series

[Vasily Khoruzhick]

? ????????? ?? 17 ???? 2010 11:18:32 ????? Vasily Khoruzhick ???????:
> This patch series adds more support for iPAQ rx1950 PDA to linux:
> 1. LEDs driver -- it controls blue, green and red LEDs on rx1950
> 2. Battery driver -- adds ability to monitor and charge battery.
> This driver is suitable for H1940 PDA aswell (just need to write
> some machine specific callbacks and get voltage LUTs)
> 
> v2: removed ac registration from s3c_adc_battery driver, use
> pda_power instead for ac support
> 
> v3: split LEDs patch to driver and machine parts,
> split battery patch into battery + LED trigger parts,
> now battery driver can skip gpio/callbacks usage
> (if there's no gpio pin to determine that battery is
> full or if charger is enabled automatically)
> 
> v4: add .blink_set callback to LEDs driver instead of
> using LED_HALF value for blinking, remove LED triggers
> from battery driver completely (for now)

Oops, I accidently removed lut_acin assignment, please discard this series 
version.

Regards
Vasily
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100717/fa52ce87/attachment-0001.sig>