Re: [lm-sensors] W83667HG-B testing

[Guenter Roeck <guenter.roeck@ericsson.com>]

On Sun, Jul 18, 2010 at 08:02:52AM -0400, Tobias Preclik wrote:
> Hi,
> 
> my Zotac board H55-ITX features the W83667HG-B chip. I downloaded and
> compiled the standalone kernel module today. Here's the sensors output:
> 
> The module loads fine:
> 
> # modprobe w83627ehf
> # tail -n 1 /var/log/messages
> Jul 18 13:42:58 leela kernel: [50378.028634] w83627ehf: Found W83667HG-B
> chip at 0xa10
> # sensors
> w83667hg-isa-0a10
> Adapter: ISA adapter
> in0:         +0.98 V  (min =  +0.00 V, max =  +1.74 V)  
> in1:         +1.11 V  (min =  +0.10 V, max =  +0.20 V)   ALARM
> in2:         +3.36 V  (min =  +3.95 V, max =  +3.28 V)   ALARM
> in3:         +3.36 V  (min =  +1.57 V, max =  +2.10 V)   ALARM
> in4:         +1.10 V  (min =  +1.74 V, max =  +1.87 V)   ALARM
> in5:         +1.18 V  (min =  +1.02 V, max =  +1.30 V)  
> in7:         +3.28 V  (min =  +3.23 V, max =  +2.62 V)   ALARM
> in8:         +3.34 V  (min =  +3.18 V, max =  +0.05 V)   ALARM
> fan1:          0 RPM  (min = 3515 RPM, div = 128)  ALARM
> fan2:       1022 RPM  (min = 1638 RPM, div = 8)  ALARM
> fan3:          0 RPM  (min =  958 RPM, div = 128)  ALARM
> fan4:          0 RPM  (min = 10546 RPM, div = 128)  ALARM
> fan5:          0 RPM  (min = 3515 RPM, div = 128)  ALARM
> temp1:       +30.0°C  (high = -56.0°C, hyst = -17.0°C)  ALARM  sensor > thermistor
> temp2:       +41.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
> temp3:        -3.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
> cpu0_vid:   +0.000 V
> 
Actual values look mostly good, but the limits are really off.
Difficult to say, though, if those are wrong readings or just badly configured.

Jean, any idea/thoughts ?

Guenter


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors