All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Mundt <lethal@linux-sh.org>
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] genesis updates for 2.6.36-rc1
Date: Wed, 04 Aug 2010 07:58:06 +0000	[thread overview]
Message-ID: <20100804075806.GE15098@linux-sh.org> (raw)

Please pull from:

	master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6.git

Which contains:

Guennadi Liakhovetski (21):
      fbdev: add a MIPI DSI header
      ARM: mach-shmobile: add LCDC and MIPI DSI-Tx clock definitions to sh7372
      sh: add a YUV422 output data format, that is also supported by LCDC
      sh-mobile: add support for displays, connected over the MIPI bus
      ARM: mach-shmobile: add framebuffer support for ap4evb
      serial: add a new port type, found on some sh-mobile SoCs
      serial: sh-sci: fix handling of SCIFB sh-mobile ports
      ARM: mach-shmobile: SH7372 has 6 SCIFA and 1 SCIFB ports
      ARM: add DMA support to sh7372, enable DMA for SDHI
      ARM: mach-shmobile: add support for the second SD-/MMC-card slot on ap4evb
      ARM: mach-shmobile: add SCIFA and SCIFB DMA slave definitions for sh7372
      ARM: mach-shmobile: add GPIO definitions for switching between LCDC0 and LCDC1
      ARM: mach-shmobile: fix EXTAL1 frequency on sh7372
      ARM: mach-shmobile: fix typos in sh7372 clock definitions
      fbdev: sh-mobile-lcdc: fix potential Oops in SH-Mobile LCDC framebuffer driver
      sh: add a list of parent configurations to struct clk
      sh: add a reparent function to DIV6 clocks
      ARM: mach-shmobile: extend clock definitions on sh7372
      sh: add a parameter to LCDC driver's .display_on() callback
      fbdev: sh-mobile: HDMI support for SH-Mobile SoCs
      ARM: mach-shmobile: add HDMI support to the ap4evb board

Kuninori Morimoto (22):
      ARM: mach-shmobile: sh7372: Add I2C0, I2C1 support
      ARM: mach-shmobile: ap4evb: Add TouchScreen support
      ARM: mach-shmobile: ap4evb: Add SW43, SW3 tiny document
      ARM: mach-shmobile: ap4evb: Add R2025S RTC support
      ARM: mach-shmobile: intc-sh7377: Add INTCS support
      ARM: mach-shmobile: Add missing __initdata on intcs sh7367/sh7377
      ARM: mach-shmobile: Add SDHI support
      ARM: mach-shmobile: intc-sh7372: modify wrong address
      ARM: mach-shmobile: ap4evb: Add USB host support
      ARM: mach-shmobile: g3evm: Add IrDA support
      ARM: mach-shmobile: ap4evb: Add FSI2 support
      ARM: mach-shmobile: ap4evb: Add MMC support
      ARM: mach-shmobile: ap4evb: evt2irq() update for MMCIF
      ARM: mach-shmobile: clock-sh7372: Add MMCIF clock
      ARM: mach-shmobile: ap4evb: update MMC/SHDI tiny document
      ARM: mach-shmobile: make sure static declaration on ap4evb
      ARM: mach-shmobile: make sure static declaration on g4evm
      ARM: mach-shmobile: make sure static declaration on g3evm
      ARM: mach-shmobile: ap4evb: Add LCD panel selection
      net/irda/sh_irda: Modify clk_get lookups
      ARM: mach-shmobile: ap4evb: Add ts_get_pendown_state for tsc2007
      ARM: mach-shmobile: clock-sh7372: modify clock name for FSI2

Magnus Damm (19):
      dmaengine: shdma: Enable on SH-Mobile ARM
      i2c: i2c-sh_mobile register access code break out
      i2c: i2c-sh_mobile support for new ICIC bits
      i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM
      ARM: mach-shmobile: add INTCS macros
      ARM: mach-shmobile: sh7367 INTCS support
      ARM: mach-shmobile: Use 0x2200 as INTCS_VECT_BASE
      ARM: mach-shmobile: sh7372 INTCS support
      ARM: mach-shmobile: Enable TMU driver build
      ARM: mach-shmobile: Use shared clock framework
      ARM: mach-shmobile: sh7372 clock framework support V2
      ARM: mach-shmobile: Set CONSISTENT_DMA_SIZE to 158 MB
      ARM: mach-shmobile: Update VMALLOC_END
      ARM: mach-shmobile: sh7367/G3EVM evt2irq() update
      ARM: mach-shmobile: sh7377/G4EVM evt2irq() update
      ARM: mach-shmobile: sh7372/AP4EVB evt2irq() update
      ARM: mach-shmobile: sh7372 clock fixes
      ARM: mach-shmobile: sh7367 clock framework V2
      ARM: mach-shmobile: sh7377 clock framework V2

Paul Mundt (5):
      MAINTAINERS: Add a patchwork entry for ARM/SH-Mobile.
      ARM: mach-shmobile: update defconfigs.
      ARM: mach-shmobile: Fix up ap4evb build warnings.
      ARM: mach-shmobile: update ap4evb defconfig for MMC/DMA changes.
      ARM: mach-shmobile: Fix up ap4evb build for LCDC merge damage.

 MAINTAINERS                                   |    3 +-
 arch/arm/mach-shmobile/Kconfig                |   26 +
 arch/arm/mach-shmobile/Makefile               |    6 +-
 arch/arm/mach-shmobile/board-ap4evb.c         |  817 +++++++++++++++++++-
 arch/arm/mach-shmobile/board-g3evm.c          |   59 ++-
 arch/arm/mach-shmobile/board-g4evm.c          |  153 ++++-
 arch/arm/mach-shmobile/clock-sh7367.c         |  357 ++++++++--
 arch/arm/mach-shmobile/clock-sh7372.c         |  560 ++++++++++++++
 arch/arm/mach-shmobile/clock-sh7377.c         |  369 +++++++++
 arch/arm/mach-shmobile/clock.c                |   44 ++
 arch/arm/mach-shmobile/include/mach/common.h  |   10 +
 arch/arm/mach-shmobile/include/mach/irqs.h    |    6 +
 arch/arm/mach-shmobile/include/mach/memory.h  |    3 +
 arch/arm/mach-shmobile/include/mach/sh7372.h  |   30 +
 arch/arm/mach-shmobile/include/mach/vmalloc.h |    3 +-
 arch/arm/mach-shmobile/intc-sh7367.c          |  178 +++++-
 arch/arm/mach-shmobile/intc-sh7372.c          |  232 ++++++-
 arch/arm/mach-shmobile/intc-sh7377.c          |  300 +++++++-
 arch/arm/mach-shmobile/pfc-sh7372.c           |    3 +
 arch/arm/mach-shmobile/setup-sh7367.c         |   30 +-
 arch/arm/mach-shmobile/setup-sh7372.c         |  391 +++++++++-
 arch/arm/mach-shmobile/setup-sh7377.c         |   34 +-
 arch/sh/boards/mach-ap325rxa/setup.c          |    2 +-
 arch/sh/boards/mach-kfr2r09/Makefile          |    6 +-
 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c       |    2 +-
 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h   |   16 +-
 drivers/dma/Kconfig                           |    2 +-
 drivers/dma/shdma.c                           |    8 +-
 drivers/i2c/busses/Kconfig                    |    2 +-
 drivers/i2c/busses/i2c-sh_mobile.c            |  121 ++-
 drivers/net/irda/sh_irda.c                    |    6 +-
 drivers/serial/sh-sci.c                       |   42 +-
 drivers/serial/sh-sci.h                       |   29 +-
 drivers/sh/Makefile                           |    5 +-
 drivers/sh/clk-cpg.c                          |   58 ++-
 drivers/video/Kconfig                         |   15 +
 drivers/video/Makefile                        |    2 +
 drivers/video/sh_mipi_dsi.c                   |  505 ++++++++++++
 drivers/video/sh_mobile_hdmi.c                | 1028 +++++++++++++++++++++++++
 drivers/video/sh_mobile_lcdcfb.c              |  196 ++++--
 include/linux/serial_core.h                   |    3 +
 include/linux/sh_clk.h                        |   23 +-
 include/video/mipi_display.h                  |  130 ++++
 include/video/sh_mipi_dsi.h                   |   35 +
 include/video/sh_mobile_hdmi.h                |   22 +
 include/video/sh_mobile_lcdc.h                |   41 +-
 46 files changed, 5602 insertions(+), 311 deletions(-)
 create mode 100644 arch/arm/mach-shmobile/clock-sh7372.c
 create mode 100644 arch/arm/mach-shmobile/clock-sh7377.c
 create mode 100644 arch/arm/mach-shmobile/clock.c
 create mode 100644 drivers/video/sh_mipi_dsi.c
 create mode 100644 drivers/video/sh_mobile_hdmi.c
 create mode 100644 include/video/mipi_display.h
 create mode 100644 include/video/sh_mipi_dsi.h
 create mode 100644 include/video/sh_mobile_hdmi.h

WARNING: multiple messages have this Message-ID (diff)
From: lethal@linux-sh.org (Paul Mundt)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] genesis updates for 2.6.36-rc1
Date: Wed, 4 Aug 2010 16:58:06 +0900	[thread overview]
Message-ID: <20100804075806.GE15098@linux-sh.org> (raw)

Please pull from:

	master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6.git

Which contains:

Guennadi Liakhovetski (21):
      fbdev: add a MIPI DSI header
      ARM: mach-shmobile: add LCDC and MIPI DSI-Tx clock definitions to sh7372
      sh: add a YUV422 output data format, that is also supported by LCDC
      sh-mobile: add support for displays, connected over the MIPI bus
      ARM: mach-shmobile: add framebuffer support for ap4evb
      serial: add a new port type, found on some sh-mobile SoCs
      serial: sh-sci: fix handling of SCIFB sh-mobile ports
      ARM: mach-shmobile: SH7372 has 6 SCIFA and 1 SCIFB ports
      ARM: add DMA support to sh7372, enable DMA for SDHI
      ARM: mach-shmobile: add support for the second SD-/MMC-card slot on ap4evb
      ARM: mach-shmobile: add SCIFA and SCIFB DMA slave definitions for sh7372
      ARM: mach-shmobile: add GPIO definitions for switching between LCDC0 and LCDC1
      ARM: mach-shmobile: fix EXTAL1 frequency on sh7372
      ARM: mach-shmobile: fix typos in sh7372 clock definitions
      fbdev: sh-mobile-lcdc: fix potential Oops in SH-Mobile LCDC framebuffer driver
      sh: add a list of parent configurations to struct clk
      sh: add a reparent function to DIV6 clocks
      ARM: mach-shmobile: extend clock definitions on sh7372
      sh: add a parameter to LCDC driver's .display_on() callback
      fbdev: sh-mobile: HDMI support for SH-Mobile SoCs
      ARM: mach-shmobile: add HDMI support to the ap4evb board

Kuninori Morimoto (22):
      ARM: mach-shmobile: sh7372: Add I2C0, I2C1 support
      ARM: mach-shmobile: ap4evb: Add TouchScreen support
      ARM: mach-shmobile: ap4evb: Add SW43, SW3 tiny document
      ARM: mach-shmobile: ap4evb: Add R2025S RTC support
      ARM: mach-shmobile: intc-sh7377: Add INTCS support
      ARM: mach-shmobile: Add missing __initdata on intcs sh7367/sh7377
      ARM: mach-shmobile: Add SDHI support
      ARM: mach-shmobile: intc-sh7372: modify wrong address
      ARM: mach-shmobile: ap4evb: Add USB host support
      ARM: mach-shmobile: g3evm: Add IrDA support
      ARM: mach-shmobile: ap4evb: Add FSI2 support
      ARM: mach-shmobile: ap4evb: Add MMC support
      ARM: mach-shmobile: ap4evb: evt2irq() update for MMCIF
      ARM: mach-shmobile: clock-sh7372: Add MMCIF clock
      ARM: mach-shmobile: ap4evb: update MMC/SHDI tiny document
      ARM: mach-shmobile: make sure static declaration on ap4evb
      ARM: mach-shmobile: make sure static declaration on g4evm
      ARM: mach-shmobile: make sure static declaration on g3evm
      ARM: mach-shmobile: ap4evb: Add LCD panel selection
      net/irda/sh_irda: Modify clk_get lookups
      ARM: mach-shmobile: ap4evb: Add ts_get_pendown_state for tsc2007
      ARM: mach-shmobile: clock-sh7372: modify clock name for FSI2

Magnus Damm (19):
      dmaengine: shdma: Enable on SH-Mobile ARM
      i2c: i2c-sh_mobile register access code break out
      i2c: i2c-sh_mobile support for new ICIC bits
      i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM
      ARM: mach-shmobile: add INTCS macros
      ARM: mach-shmobile: sh7367 INTCS support
      ARM: mach-shmobile: Use 0x2200 as INTCS_VECT_BASE
      ARM: mach-shmobile: sh7372 INTCS support
      ARM: mach-shmobile: Enable TMU driver build
      ARM: mach-shmobile: Use shared clock framework
      ARM: mach-shmobile: sh7372 clock framework support V2
      ARM: mach-shmobile: Set CONSISTENT_DMA_SIZE to 158 MB
      ARM: mach-shmobile: Update VMALLOC_END
      ARM: mach-shmobile: sh7367/G3EVM evt2irq() update
      ARM: mach-shmobile: sh7377/G4EVM evt2irq() update
      ARM: mach-shmobile: sh7372/AP4EVB evt2irq() update
      ARM: mach-shmobile: sh7372 clock fixes
      ARM: mach-shmobile: sh7367 clock framework V2
      ARM: mach-shmobile: sh7377 clock framework V2

Paul Mundt (5):
      MAINTAINERS: Add a patchwork entry for ARM/SH-Mobile.
      ARM: mach-shmobile: update defconfigs.
      ARM: mach-shmobile: Fix up ap4evb build warnings.
      ARM: mach-shmobile: update ap4evb defconfig for MMC/DMA changes.
      ARM: mach-shmobile: Fix up ap4evb build for LCDC merge damage.

 MAINTAINERS                                   |    3 +-
 arch/arm/mach-shmobile/Kconfig                |   26 +
 arch/arm/mach-shmobile/Makefile               |    6 +-
 arch/arm/mach-shmobile/board-ap4evb.c         |  817 +++++++++++++++++++-
 arch/arm/mach-shmobile/board-g3evm.c          |   59 ++-
 arch/arm/mach-shmobile/board-g4evm.c          |  153 ++++-
 arch/arm/mach-shmobile/clock-sh7367.c         |  357 ++++++++--
 arch/arm/mach-shmobile/clock-sh7372.c         |  560 ++++++++++++++
 arch/arm/mach-shmobile/clock-sh7377.c         |  369 +++++++++
 arch/arm/mach-shmobile/clock.c                |   44 ++
 arch/arm/mach-shmobile/include/mach/common.h  |   10 +
 arch/arm/mach-shmobile/include/mach/irqs.h    |    6 +
 arch/arm/mach-shmobile/include/mach/memory.h  |    3 +
 arch/arm/mach-shmobile/include/mach/sh7372.h  |   30 +
 arch/arm/mach-shmobile/include/mach/vmalloc.h |    3 +-
 arch/arm/mach-shmobile/intc-sh7367.c          |  178 +++++-
 arch/arm/mach-shmobile/intc-sh7372.c          |  232 ++++++-
 arch/arm/mach-shmobile/intc-sh7377.c          |  300 +++++++-
 arch/arm/mach-shmobile/pfc-sh7372.c           |    3 +
 arch/arm/mach-shmobile/setup-sh7367.c         |   30 +-
 arch/arm/mach-shmobile/setup-sh7372.c         |  391 +++++++++-
 arch/arm/mach-shmobile/setup-sh7377.c         |   34 +-
 arch/sh/boards/mach-ap325rxa/setup.c          |    2 +-
 arch/sh/boards/mach-kfr2r09/Makefile          |    6 +-
 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c       |    2 +-
 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h   |   16 +-
 drivers/dma/Kconfig                           |    2 +-
 drivers/dma/shdma.c                           |    8 +-
 drivers/i2c/busses/Kconfig                    |    2 +-
 drivers/i2c/busses/i2c-sh_mobile.c            |  121 ++-
 drivers/net/irda/sh_irda.c                    |    6 +-
 drivers/serial/sh-sci.c                       |   42 +-
 drivers/serial/sh-sci.h                       |   29 +-
 drivers/sh/Makefile                           |    5 +-
 drivers/sh/clk-cpg.c                          |   58 ++-
 drivers/video/Kconfig                         |   15 +
 drivers/video/Makefile                        |    2 +
 drivers/video/sh_mipi_dsi.c                   |  505 ++++++++++++
 drivers/video/sh_mobile_hdmi.c                | 1028 +++++++++++++++++++++++++
 drivers/video/sh_mobile_lcdcfb.c              |  196 ++++--
 include/linux/serial_core.h                   |    3 +
 include/linux/sh_clk.h                        |   23 +-
 include/video/mipi_display.h                  |  130 ++++
 include/video/sh_mipi_dsi.h                   |   35 +
 include/video/sh_mobile_hdmi.h                |   22 +
 include/video/sh_mobile_lcdc.h                |   41 +-
 46 files changed, 5602 insertions(+), 311 deletions(-)
 create mode 100644 arch/arm/mach-shmobile/clock-sh7372.c
 create mode 100644 arch/arm/mach-shmobile/clock-sh7377.c
 create mode 100644 arch/arm/mach-shmobile/clock.c
 create mode 100644 drivers/video/sh_mipi_dsi.c
 create mode 100644 drivers/video/sh_mobile_hdmi.c
 create mode 100644 include/video/mipi_display.h
 create mode 100644 include/video/sh_mipi_dsi.h
 create mode 100644 include/video/sh_mobile_hdmi.h

             reply	other threads:[~2010-08-04  7:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-04  7:58 Paul Mundt [this message]
2010-08-04  7:58 ` [GIT PULL] genesis updates for 2.6.36-rc1 Paul Mundt
2010-08-20 11:45 ` [GIT PULL] genesis updates for 2.6.36-rc2 Paul Mundt
2010-08-20 11:45   ` Paul Mundt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100804075806.GE15098@linux-sh.org \
    --to=lethal@linux-sh.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.