From: Dan Carpenter <error27@gmail.com>
To: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com>,
linux-driver@qlogic.com, "David S. Miller" <davem@davemloft.net>,
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>,
netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch 2/2 v2] qlcnic: using too much stack
Date: Tue, 10 Aug 2010 07:49:36 +0000 [thread overview]
Message-ID: <20100810074936.GG18431@bicker> (raw)
qlcnic_pci_info structs are 128 bytes so an array of 8 uses 1024 bytes.
That's a lot if you run with 4K stacks. I allocated them with kcalloc()
instead.
Signed-off-by: Dan Carpenter <error27@gmail.com>
---
V2: No change. I had to respin because of the 1/1 patch.
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 6b8df55..bf6d87a 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -473,14 +473,20 @@ qlcnic_cleanup_pci_map(struct qlcnic_adapter *adapter)
static int
qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
{
- struct qlcnic_pci_info pci_info[QLCNIC_MAX_PCI_FUNC];
+ struct qlcnic_pci_info *pci_info;
int i, ret = 0, err;
u8 pfn;
+ pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+
adapter->npars = kzalloc(sizeof(struct qlcnic_npar_info) *
QLCNIC_MAX_PCI_FUNC, GFP_KERNEL);
- if (!adapter->npars)
- return -ENOMEM;
+ if (!adapter->npars) {
+ err = -ENOMEM;
+ goto err_pci_info;
+ }
adapter->eswitch = kzalloc(sizeof(struct qlcnic_eswitch) *
QLCNIC_NIU_MAX_XG_PORTS, GFP_KERNEL);
@@ -508,6 +514,7 @@ qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++)
adapter->eswitch[i].flags |= QLCNIC_SWITCH_ENABLE;
+ kfree(pci_info);
return 0;
err_eswitch:
@@ -516,6 +523,8 @@ err_eswitch:
err_npars:
kfree(adapter->npars);
adapter->npars = NULL;
+err_pci_info:
+ kfree(pci_info);
return ret;
}
@@ -3362,15 +3371,21 @@ qlcnic_sysfs_read_pci_config(struct file *file, struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
struct qlcnic_pci_func_cfg pci_cfg[QLCNIC_MAX_PCI_FUNC];
- struct qlcnic_pci_info pci_info[QLCNIC_MAX_PCI_FUNC];
+ struct qlcnic_pci_info *pci_info;
int i, ret;
if (size != sizeof(pci_cfg))
return QL_STATUS_INVALID_PARAM;
+ pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+
ret = qlcnic_get_pci_info(adapter, pci_info);
- if (ret)
+ if (ret) {
+ kfree(pci_info);
return ret;
+ }
for (i = 0; i < QLCNIC_MAX_PCI_FUNC ; i++) {
pci_cfg[i].pci_func = pci_info[i].id;
@@ -3381,8 +3396,8 @@ qlcnic_sysfs_read_pci_config(struct file *file, struct kobject *kobj,
memcpy(&pci_cfg[i].def_mac_addr, &pci_info[i].mac, ETH_ALEN);
}
memcpy(buf, &pci_cfg, size);
+ kfree(pci_info);
return size;
-
}
static struct bin_attribute bin_attr_npar_config = {
.attr = {.name = "npar_config", .mode = (S_IRUGO | S_IWUSR)},
WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <error27@gmail.com>
To: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com>,
linux-driver@qlogic.com, "David S. Miller" <davem@davemloft.net>,
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>,
netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch 2/2 v2] qlcnic: using too much stack
Date: Tue, 10 Aug 2010 09:49:36 +0200 [thread overview]
Message-ID: <20100810074936.GG18431@bicker> (raw)
qlcnic_pci_info structs are 128 bytes so an array of 8 uses 1024 bytes.
That's a lot if you run with 4K stacks. I allocated them with kcalloc()
instead.
Signed-off-by: Dan Carpenter <error27@gmail.com>
---
V2: No change. I had to respin because of the 1/1 patch.
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 6b8df55..bf6d87a 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -473,14 +473,20 @@ qlcnic_cleanup_pci_map(struct qlcnic_adapter *adapter)
static int
qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
{
- struct qlcnic_pci_info pci_info[QLCNIC_MAX_PCI_FUNC];
+ struct qlcnic_pci_info *pci_info;
int i, ret = 0, err;
u8 pfn;
+ pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+
adapter->npars = kzalloc(sizeof(struct qlcnic_npar_info) *
QLCNIC_MAX_PCI_FUNC, GFP_KERNEL);
- if (!adapter->npars)
- return -ENOMEM;
+ if (!adapter->npars) {
+ err = -ENOMEM;
+ goto err_pci_info;
+ }
adapter->eswitch = kzalloc(sizeof(struct qlcnic_eswitch) *
QLCNIC_NIU_MAX_XG_PORTS, GFP_KERNEL);
@@ -508,6 +514,7 @@ qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++)
adapter->eswitch[i].flags |= QLCNIC_SWITCH_ENABLE;
+ kfree(pci_info);
return 0;
err_eswitch:
@@ -516,6 +523,8 @@ err_eswitch:
err_npars:
kfree(adapter->npars);
adapter->npars = NULL;
+err_pci_info:
+ kfree(pci_info);
return ret;
}
@@ -3362,15 +3371,21 @@ qlcnic_sysfs_read_pci_config(struct file *file, struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
struct qlcnic_pci_func_cfg pci_cfg[QLCNIC_MAX_PCI_FUNC];
- struct qlcnic_pci_info pci_info[QLCNIC_MAX_PCI_FUNC];
+ struct qlcnic_pci_info *pci_info;
int i, ret;
if (size != sizeof(pci_cfg))
return QL_STATUS_INVALID_PARAM;
+ pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+
ret = qlcnic_get_pci_info(adapter, pci_info);
- if (ret)
+ if (ret) {
+ kfree(pci_info);
return ret;
+ }
for (i = 0; i < QLCNIC_MAX_PCI_FUNC ; i++) {
pci_cfg[i].pci_func = pci_info[i].id;
@@ -3381,8 +3396,8 @@ qlcnic_sysfs_read_pci_config(struct file *file, struct kobject *kobj,
memcpy(&pci_cfg[i].def_mac_addr, &pci_info[i].mac, ETH_ALEN);
}
memcpy(buf, &pci_cfg, size);
+ kfree(pci_info);
return size;
-
}
static struct bin_attribute bin_attr_npar_config = {
.attr = {.name = "npar_config", .mode = (S_IRUGO | S_IWUSR)},
next reply other threads:[~2010-08-10 7:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-10 7:49 Dan Carpenter [this message]
2010-08-10 7:49 ` [patch 2/2 v2] qlcnic: using too much stack Dan Carpenter
2010-08-10 8:34 ` David Miller
2010-08-10 8:34 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100810074936.GG18431@bicker \
--to=error27@gmail.com \
--cc=amit.salecha@qlogic.com \
--cc=anirban.chakraborty@qlogic.com \
--cc=davem@davemloft.net \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-driver@qlogic.com \
--cc=netdev@vger.kernel.org \
--cc=sucheta.chakraborty@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.