* AMD iommu , pci passthrough problems assigning devices to HVM
@ 2010-08-10 12:26 Sander Eikelenboom
2010-08-10 20:51 ` Rose, Gregory V
2010-08-11 10:11 ` Wei Wang2
0 siblings, 2 replies; 4+ messages in thread
From: Sander Eikelenboom @ 2010-08-10 12:26 UTC (permalink / raw)
To: Huang2, Wei; +Cc: Wang2, Wei, Przywara, Andre, Joerg Roedel, xen-devel
[-- Attachment #1: Type: text/plain, Size: 991 bytes --]
Hi,
I'm running a machine with:
- Hypervisor: xen-unstable
- Dom0: xen/next-2.6.32.17 commit c3f5aba942c7516a5c76c47345ff0a473daf2542
Hardware:
-MSI 890FXA-GD70 with AMD IOMMU
-Phenom X6
I'm trying to do PCI passthrough to a HVM, this fails with:
Error: Failed to assign device to IOMMU (0000:04:00.0@100,msitranslate=1,power_mgmt=0)
Error: pci: to avoid potential security issue, 0000:08:00.0 is not allowed to be assigned to guest since it is behind PCIe switch that does not support or enable ACS.
I have found this thread https://bugzilla.redhat.com/show_bug.cgi?id=526713 regarding the ACS problem, which says the pci bridges need these capabilities:
ScrValid+, ReqRedir+, CmpltRedir+, and UpstreamFwd+
When i do a lspci -vvv on my system i see these capabilities, but i do see some disturbing debug message on boot when amd_iommu_debug is on.
Attached:
- xm info
- xm dmesg (booted with amd_iommu_debug on)
- dmesg
- lspci -vvv
--
Sander
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 112056 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.17+xen-next-2.6.32.x-20100807 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sat Aug 7 17:49:00 CEST 2010
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro earlyprintk=xen max_loop=255 loop_max_part=63 xen-pciback.hide=(03:06.0)(04:00.0)(08:00.0)(0a:01.0)(0a:01.1)(0a:01.2) pci=resource_alignment=03:06.0;04:00.0;08:00.0;0a:01.0;0a:01.1;0a:01.2;
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] Xen: 000000000009ac00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 00000000c7e90000 - 00000000c7e9e000 (ACPI data)
[ 0.000000] Xen: 00000000c7e9e000 - 00000000c7ee0000 (ACPI NVS)
[ 0.000000] Xen: 00000000c7ee0000 - 00000000c7f00000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] 0000000000 - 0030000000 page 4k
[ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000
[ 0.000000] RAMDISK: 0214d000 - 0d4e0400
[ 0.000000] ACPI: RSDP 00000000000fb120 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7e90000 00048 (v01 MSI OEMSLIC 20100622 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7e90200 00084 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7e905e0 09449 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7e9e000 00040
[ 0.000000] ACPI: APIC 00000000c7e90390 00088 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7e90420 0003C (v01 7640MS OEMMCFG 20100622 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000c7e90460 00176 (v01 MSI OEMSLIC 20100622 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7e9e040 00072 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7e9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7e9a6f0 00038 (v01 7640MS OEMHPET 20100622 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000c7e9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 00000000c7e9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000d662000 - 000d6d1000] XEN PAGETABLES ==> [000d662000 - 000d6d1000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 000212cbe8] TEXT DATA BSS ==> [0001000000 - 000212cbe8]
[ 0.000000] #4 [000214d000 - 000d4e0400] RAMDISK ==> [000214d000 - 000d4e0400]
[ 0.000000] #5 [000d4e1000 - 000d662000] XEN START INFO ==> [000d4e1000 - 000d662000]
[ 0.000000] #6 [000212d000 - 000212d10b] BRK ==> [000212d000 - 000212d10b]
[ 0.000000] #7 [0000100000 - 0000210000] PGTABLE ==> [0000100000 - 0000210000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] On node 0 totalpages: 196490
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 275 pages reserved
[ 0.000000] DMA zone: 3615 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4136 pages used for memmap
[ 0.000000] DMA32 zone: 188376 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 0, address 0xfec20000, GSI 24-24
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 280
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:97e90000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88000d6e8000 s84888 r8192 d21608 u114688
[ 0.000000] pcpu-alloc: s84888 r8192 d21608 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] trying to map vcpu_info 0 at ffff88000d6f3020, mfn 22d6f3, offset 32
[ 0.000000] cpu 0 using vcpu_info at ffff88000d6f3020
[ 0.000000] trying to map vcpu_info 1 at ffff88000d70f020, mfn 22d70f, offset 32
[ 0.000000] cpu 1 using vcpu_info at ffff88000d70f020
[ 0.000000] trying to map vcpu_info 2 at ffff88000d72b020, mfn 22d72b, offset 32
[ 0.000000] cpu 2 using vcpu_info at ffff88000d72b020
[ 0.000000] trying to map vcpu_info 3 at ffff88000d747020, mfn 22d747, offset 32
[ 0.000000] cpu 3 using vcpu_info at ffff88000d747020
[ 0.000000] trying to map vcpu_info 4 at ffff88000d763020, mfn 22d763, offset 32
[ 0.000000] cpu 4 using vcpu_info at ffff88000d763020
[ 0.000000] trying to map vcpu_info 5 at ffff88000d77f020, mfn 22d77f, offset 32
[ 0.000000] cpu 5 using vcpu_info at ffff88000d77f020
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 191991
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro earlyprintk=xen max_loop=255 loop_max_part=63 xen-pciback.hide=(03:06.0)(04:00.0)(08:00.0)(0a:01.0)(0a:01.1)(0a:01.2) pci=resource_alignment=03:06.0;04:00.0;08:00.0;0a:01.0;0a:01.1;0a:01.2;
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff88000eb5d000 - ffff880012b5d000
[ 0.000000] DMA: software IO TLB at phys 0xeb5d000 - 0x12b5d000
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000eb5d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880012bbd000 size=32768
[ 0.000000] Memory: 495460k/786432k available (4559k kernel code, 472k absent, 289788k reserved, 3147k data, 496k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 4143270.392 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.40 BogoMIPS (lpj=12800808)
[ 0.004212] Security Framework initialized
[ 0.004247] SELinux: Disabled at boot.
[ 0.004363] Mount-cache hash table entries: 256
[ 0.005172] Initializing cgroup subsys ns
[ 0.005206] Initializing cgroup subsys cpuacct
[ 0.005248] Initializing cgroup subsys devices
[ 0.005377] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.005411] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.005445] tseg: 0000000000
[ 0.005473] CPU: Physical Processor ID: 0
[ 0.005509] CPU: Processor Core ID: 0
[ 0.005545] mce: CPU supports 6 MCE banks
[ 0.005592] Performance Events: AMD PMU driver.
[ 0.005657] ------------[ cut here ]------------
[ 0.005697] WARNING: at arch/x86/xen/enlighten.c:742 xen_apic_write+0x15/0x17()
[ 0.005737] Hardware name: MS-7640
[ 0.005772] Modules linked in:
[ 0.005837] Pid: 0, comm: swapper Not tainted 2.6.32.17+xen-next-2.6.32.x-20100807 #1
[ 0.005878] Call Trace:
[ 0.005916] [<ffffffff81058602>] ? add_timer_on+0xc3/0xd1
[ 0.005953] [<ffffffff8100a811>] ? xen_apic_write+0x15/0x17
[ 0.005992] [<ffffffff8104a4ab>] warn_slowpath_common+0x77/0xa4
[ 0.006030] [<ffffffff8104a4e7>] warn_slowpath_null+0xf/0x11
[ 0.006067] [<ffffffff8100a811>] xen_apic_write+0x15/0x17
[ 0.006106] [<ffffffff8101e181>] perf_events_lapic_init+0x2e/0x30
[ 0.006144] [<ffffffff817a6918>] init_hw_perf_events+0x326/0x3c3
[ 0.006183] [<ffffffff814684f8>] ? identify_cpu+0x2ee/0x2f9
[ 0.006220] [<ffffffff817a6564>] identify_boot_cpu+0x3c/0x3e
[ 0.006257] [<ffffffff817a65ce>] check_bugs+0x9/0x2d
[ 0.006295] [<ffffffff8179dcbf>] start_kernel+0x38e/0x3a3
[ 0.006332] [<ffffffff8179d2bf>] x86_64_start_reservations+0xaa/0xae
[ 0.006370] [<ffffffff817a09e5>] xen_start_kernel+0x62e/0x635
[ 0.006429] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.006470] ... version: 0
[ 0.006505] ... bit width: 48
[ 0.006540] ... generic registers: 4
[ 0.006575] ... value mask: 0000ffffffffffff
[ 0.006611] ... max period: 00007fffffffffff
[ 0.006647] ... fixed-purpose events: 0
[ 0.006682] ... event mask: 000000000000000f
[ 0.006739] lockdep: fixing up alternatives.
[ 0.006774] SMP alternatives: switching to UP code
[ 0.008000] ACPI: Core revision 20090903
[ 0.028532] installing Xen timer for CPU 1
[ 0.028629] lockdep: fixing up alternatives.
[ 0.028672] SMP alternatives: switching to SMP code
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.032915] installing Xen timer for CPU 2
[ 0.004000] Initializing CPU#2
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.033878] installing Xen timer for CPU 3
[ 0.004000] Initializing CPU#3
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.034847] installing Xen timer for CPU 4
[ 0.004000] Initializing CPU#4
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 4
[ 0.035810] installing Xen timer for CPU 5
[ 0.004000] Initializing CPU#5
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 5
[ 0.036172] Brought up 6 CPUs
[ 0.036437] CPU0 attaching sched-domain:
[ 0.036440] domain 0: span 0-5 level CPU
[ 0.036442] groups: 0 1 2 3 4 5
[ 0.036459] CPU1 attaching sched-domain:
[ 0.036461] domain 0: span 0-5 level CPU
[ 0.036463] groups: 1 2 3 4 5 0
[ 0.036472] CPU2 attaching sched-domain:
[ 0.036474] domain 0: span 0-5 level CPU
[ 0.036476] groups: 2 3 4 5 0 1
[ 0.036485] CPU3 attaching sched-domain:
[ 0.036487] domain 0: span 0-5 level CPU
[ 0.036489] groups: 3 4 5 0 1 2
[ 0.036498] CPU4 attaching sched-domain:
[ 0.036499] domain 0: span 0-5 level CPU
[ 0.036501] groups: 4 5 0 1 2 3
[ 0.036510] CPU5 attaching sched-domain:
[ 0.036512] domain 0: span 0-5 level CPU
[ 0.036514] groups: 5 0 1 2 3 4
[ 0.040090] Grant table initialized
[ 0.040131] regulator: core version 0.5
[ 0.040754] NET: Registered protocol family 16
[ 0.043058] node 0 link 0: io port [1000, ffffff]
[ 0.043062] TOM: 00000000c8000000 aka 3200M
[ 0.043099] Fam 10h mmconf [e0000000, efffffff]
[ 0.043104] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.043108] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.043111] node 0 link 0: mmio [a0000, bffff]
[ 0.043115] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.043117] TOM2: 0000000238000000 aka 9088M
[ 0.043152] bus: [00,07] on node 0 link 0
[ 0.043154] bus: 00 index 0 io port: [0, ffff]
[ 0.043155] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.043157] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.043159] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.043160] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.043335] ACPI: bus type pci registered
[ 0.044007] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.044045] PCI: Not using MMCONFIG.
[ 0.044081] PCI: Using configuration type 1 for base access
[ 0.044126] PCI: Using configuration type 1 for extended access
[ 0.060708] bio: create slab <bio-0> at 0
[ 0.065468] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.065597] ACPI: EC: Look up EC in DSDT
[ 0.070930] ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND
[ 0.071034] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
[ 0.071138] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff82115ec0), AE_NOT_FOUND
[ 0.071445] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.095592] ACPI: Interpreter enabled
[ 0.095631] ACPI: (supports S0 S5)
[ 0.095769] ACPI: Using IOAPIC for interrupt routing
[ 0.095897] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.100420] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.138001] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.176998] ACPI Warning: Incorrect checksum in table [OEMB] - 8E, should be 8D (20090903/tbutils-314)
[ 0.177566] ACPI: No dock devices found.
[ 0.177863] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.178199] PCI: Scanning bus 0000:00
[ 0.178245] pci 0000:00:00.0: found [1002:5a11] class 000600 header type 00
[ 0.178252] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.178299] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.178416] pci 0000:00:00.2: found [1002:5a23] class 000806 header type 00
[ 0.178440] pci 0000:00:00.2: calling quirk_no_ata_d3+0x0/0x1b
[ 0.178487] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.178572] pci 0000:00:02.0: found [1002:5a16] class 000604 header type 01
[ 0.178582] pci 0000:00:02.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.178614] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.178648] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.178690] pci 0000:00:02.0: PME# disabled
[ 0.178775] pci 0000:00:05.0: found [1002:5a19] class 000604 header type 01
[ 0.178786] pci 0000:00:05.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.178818] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.178851] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.178890] pci 0000:00:05.0: PME# disabled
[ 0.178967] pci 0000:00:06.0: found [1002:5a1a] class 000604 header type 01
[ 0.178977] pci 0000:00:06.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.179009] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.179042] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.179081] pci 0000:00:06.0: PME# disabled
[ 0.179162] pci 0000:00:0a.0: found [1002:5a1d] class 000604 header type 01
[ 0.179172] pci 0000:00:0a.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.179204] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.179237] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.179285] pci 0000:00:0a.0: PME# disabled
[ 0.179354] pci 0000:00:0b.0: found [1002:5a1f] class 000604 header type 01
[ 0.179364] pci 0000:00:0b.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.179396] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.179429] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.179472] pci 0000:00:0b.0: PME# disabled
[ 0.179546] pci 0000:00:0d.0: found [1002:5a1e] class 000604 header type 01
[ 0.179556] pci 0000:00:0d.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.179587] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.179620] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 0.179660] pci 0000:00:0d.0: PME# disabled
[ 0.179773] pci 0000:00:11.0: found [1002:4391] class 000106 header type 00
[ 0.179813] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.179830] pci 0000:00:11.0: reg 10 io port: [0x6000-0x6007]
[ 0.179841] pci 0000:00:11.0: reg 14 io port: [0x5000-0x5003]
[ 0.179853] pci 0000:00:11.0: reg 18 io port: [0x3000-0x3007]
[ 0.179866] pci 0000:00:11.0: reg 1c io port: [0x2000-0x2003]
[ 0.179883] pci 0000:00:11.0: reg 20 io port: [0x1000-0x100f]
[ 0.179895] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe0ff000-0xfe0ff3ff]
[ 0.179911] pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180000] pci 0000:00:12.0: found [1002:4397] class 000c03 header type 00
[ 0.180000] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180000] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe0fb000-0xfe0fbfff]
[ 0.180000] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180000] pci 0000:00:12.2: found [1002:4396] class 000c03 header type 00
[ 0.180000] pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180000] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe0ff400-0xfe0ff4ff]
[ 0.180000] pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180000] pci 0000:00:12.2: supports D1 D2
[ 0.180000] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.180000] pci 0000:00:12.2: PME# disabled
[ 0.180021] pci 0000:00:13.0: found [1002:4397] class 000c03 header type 00
[ 0.180027] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180041] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe0fc000-0xfe0fcfff]
[ 0.180093] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180128] pci 0000:00:13.2: found [1002:4396] class 000c03 header type 00
[ 0.180153] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180166] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe0ff800-0xfe0ff8ff]
[ 0.180219] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180252] pci 0000:00:13.2: supports D1 D2
[ 0.180254] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.180294] pci 0000:00:13.2: PME# disabled
[ 0.180364] pci 0000:00:14.0: found [1002:4385] class 000c05 header type 00
[ 0.180370] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180374] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x50
[ 0.180437] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0xd
[ 0.180439] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180471] pci 0000:00:14.3: found [1002:439d] class 000601 header type 00
[ 0.180477] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180539] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180563] pci 0000:00:14.4: found [1002:4384] class 000604 header type 01
[ 0.180569] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180597] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180621] pci 0000:00:14.5: found [1002:4399] class 000c03 header type 00
[ 0.180627] pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180641] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe0fd000-0xfe0fdfff]
[ 0.180692] pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180731] pci 0000:00:15.0: found [1002:43a0] class 000604 header type 01
[ 0.180743] pci 0000:00:15.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180782] pci 0000:00:15.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180822] pci 0000:00:15.0: supports D1 D2
[ 0.180872] pci 0000:00:16.0: found [1002:4397] class 000c03 header type 00
[ 0.180878] pci 0000:00:16.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.180891] pci 0000:00:16.0: reg 10 32bit mmio: [0xfe0fe000-0xfe0fefff]
[ 0.180943] pci 0000:00:16.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.180978] pci 0000:00:16.2: found [1002:4396] class 000c03 header type 00
[ 0.181003] pci 0000:00:16.2: calling quirk_no_ata_d3+0x0/0x1b
[ 0.181016] pci 0000:00:16.2: reg 10 32bit mmio: [0xfe0ffc00-0xfe0ffcff]
[ 0.181069] pci 0000:00:16.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181102] pci 0000:00:16.2: supports D1 D2
[ 0.181104] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.181144] pci 0000:00:16.2: PME# disabled
[ 0.181222] pci 0000:00:18.0: found [1022:1200] class 000600 header type 00
[ 0.181264] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181297] pci 0000:00:18.1: found [1022:1201] class 000600 header type 00
[ 0.181339] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181357] pci 0000:00:18.2: found [1022:1202] class 000600 header type 00
[ 0.181399] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181424] pci 0000:00:18.3: found [1022:1203] class 000600 header type 00
[ 0.181466] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181499] pci 0000:00:18.4: found [1022:1204] class 000600 header type 00
[ 0.181541] pci 0000:00:18.4: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181572] PCI: Fixups for bus 0000:00
[ 0.181576] pci 0000:00:02.0: scanning behind bridge, config 0d0d00, pass 0
[ 0.181584] PCI: Scanning bus 0000:0d
[ 0.181607] pci 0000:0d:00.0: found [1002:95c5] class 000300 header type 00
[ 0.181619] pci 0000:0d:00.0: calling quirk_no_ata_d3+0x0/0x1b
[ 0.181638] pci 0000:0d:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.181654] pci 0000:0d:00.0: reg 18 64bit mmio: [0xfe9e0000-0xfe9effff]
[ 0.181663] pci 0000:0d:00.0: reg 20 io port: [0xe000-0xe0ff]
[ 0.181679] pci 0000:0d:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff]
[ 0.181686] pci 0000:0d:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181719] pci 0000:0d:00.0: supports D1 D2
[ 0.181760] pci 0000:0d:00.1: found [1002:aa28] class 000403 header type 00
[ 0.181772] pci 0000:0d:00.1: calling quirk_no_ata_d3+0x0/0x1b
[ 0.181791] pci 0000:0d:00.1: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[ 0.181832] pci 0000:0d:00.1: calling quirk_resource_alignment+0x0/0x1b5
[ 0.181866] pci 0000:0d:00.1: supports D1 D2
[ 0.181993] PCI: Fixups for bus 0000:0d
[ 0.182001] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.182005] pci 0000:00:02.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.182013] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.182015] PCI: Bus scan for 0000:0d returning with max=0d
[ 0.182020] pci 0000:00:05.0: scanning behind bridge, config 0c0c00, pass 0
[ 0.182028] PCI: Scanning bus 0000:0c
[ 0.182057] pci 0000:0c:00.0: found [10ec:8168] class 000200 header type 00
[ 0.182087] pci 0000:0c:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.182113] pci 0000:0c:00.0: reg 18 64bit mmio pref: [0xcffff000-0xcfffffff]
[ 0.182131] pci 0000:0c:00.0: reg 20 64bit mmio pref: [0xcfff8000-0xcfffbfff]
[ 0.182141] pci 0000:0c:00.0: reg 30 32bit mmio pref: [0xfe8e0000-0xfe8fffff]
[ 0.182149] pci 0000:0c:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.182201] pci 0000:0c:00.0: supports D1 D2
[ 0.182202] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182244] pci 0000:0c:00.0: PME# disabled
[ 0.182374] PCI: Fixups for bus 0000:0c
[ 0.182381] pci 0000:00:05.0: bridge io port: [0xd000-0xdfff]
[ 0.182386] pci 0000:00:05.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.182393] pci 0000:00:05.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.182395] PCI: Bus scan for 0000:0c returning with max=0c
[ 0.182400] pci 0000:00:06.0: scanning behind bridge, config 0b0b00, pass 0
[ 0.182408] PCI: Scanning bus 0000:0b
[ 0.182438] pci 0000:0b:00.0: found [10ec:8168] class 000200 header type 00
[ 0.182468] pci 0000:0b:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.182495] pci 0000:0b:00.0: reg 18 64bit mmio pref: [0xcfeff000-0xcfefffff]
[ 0.182513] pci 0000:0b:00.0: reg 20 64bit mmio pref: [0xcfef8000-0xcfefbfff]
[ 0.182523] pci 0000:0b:00.0: reg 30 32bit mmio pref: [0xfe7e0000-0xfe7fffff]
[ 0.182531] pci 0000:0b:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.182582] pci 0000:0b:00.0: supports D1 D2
[ 0.182583] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182624] pci 0000:0b:00.0: PME# disabled
[ 0.182753] PCI: Fixups for bus 0000:0b
[ 0.182761] pci 0000:00:06.0: bridge io port: [0xc000-0xcfff]
[ 0.182765] pci 0000:00:06.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.182773] pci 0000:00:06.0: bridge 64bit mmio pref: [0xcfe00000-0xcfefffff]
[ 0.182775] PCI: Bus scan for 0000:0b returning with max=0b
[ 0.182779] pci 0000:00:0a.0: scanning behind bridge, config 0a0900, pass 0
[ 0.182787] PCI: Scanning bus 0000:09
[ 0.182826] pci 0000:09:00.0: found [104c:8231] class 000604 header type 01
[ 0.182903] pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.182959] pci 0000:09:00.0: supports D1 D2
[ 0.183080] PCI: Fixups for bus 0000:09
[ 0.183091] pci 0000:00:0a.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
[ 0.183100] pci 0000:09:00.0: scanning behind bridge, config 0a0a09, pass 0
[ 0.183110] PCI: Scanning bus 0000:0a
[ 0.183137] pci 0000:0a:01.0: found [1033:0035] class 000c03 header type 00
[ 0.183175] pci 0000:0a:01.0: reg 10 32bit mmio: [0xfe6fd000-0xfe6fdfff]
[ 0.183244] pci 0000:0a:01.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.183247] pci 0000:0a:01.0: Disabling memory decoding and releasing memory resources.
[ 0.183325] pci 0000:0a:01.0: supports D1 D2
[ 0.183326] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.183367] pci 0000:0a:01.0: PME# disabled
[ 0.183436] pci 0000:0a:01.1: found [1033:0035] class 000c03 header type 00
[ 0.183475] pci 0000:0a:01.1: reg 10 32bit mmio: [0xfe6fe000-0xfe6fefff]
[ 0.183544] pci 0000:0a:01.1: calling quirk_resource_alignment+0x0/0x1b5
[ 0.183547] pci 0000:0a:01.1: Disabling memory decoding and releasing memory resources.
[ 0.183625] pci 0000:0a:01.1: supports D1 D2
[ 0.183627] pci 0000:0a:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.183667] pci 0000:0a:01.1: PME# disabled
[ 0.183739] pci 0000:0a:01.2: found [1033:00e0] class 000c03 header type 00
[ 0.183777] pci 0000:0a:01.2: reg 10 32bit mmio: [0xfe6ffc00-0xfe6ffcff]
[ 0.183846] pci 0000:0a:01.2: calling quirk_resource_alignment+0x0/0x1b5
[ 0.183849] pci 0000:0a:01.2: Disabling memory decoding and releasing memory resources.
[ 0.183902] pci 0000:0a:01.2: Rounding up size of resource #0 to 0x1000.
[ 0.183969] pci 0000:0a:01.2: supports D1 D2
[ 0.183971] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.184000] pci 0000:0a:01.2: PME# disabled
[ 0.184000] PCI: Fixups for bus 0000:0a
[ 0.184000] pci 0000:09:00.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
[ 0.184000] PCI: Bus scan for 0000:0a returning with max=0a
[ 0.184000] pci 0000:09:00.0: scanning behind bridge, config 0a0a09, pass 1
[ 0.184000] PCI: Bus scan for 0000:09 returning with max=0a
[ 0.184000] pci 0000:00:0b.0: scanning behind bridge, config 080500, pass 0
[ 0.184000] PCI: Scanning bus 0000:05
[ 0.184000] pci 0000:05:00.0: found [10b5:8613] class 000604 header type 01
[ 0.184000] pci 0000:05:00.0: reg 10 32bit mmio: [0xfe3e0000-0xfe3fffff]
[ 0.184000] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.184000] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.184000] pci 0000:05:00.0: PME# disabled
[ 0.184000] PCI: Fixups for bus 0000:05
[ 0.184000] pci 0000:00:0b.0: bridge io port: [0xa000-0xbfff]
[ 0.184000] pci 0000:00:0b.0: bridge 32bit mmio: [0xfe300000-0xfe5fffff]
[ 0.184000] pci 0000:05:00.0: scanning behind bridge, config 080605, pass 0
[ 0.184000] PCI: Scanning bus 0000:06
[ 0.184000] pci 0000:06:01.0: found [10b5:8613] class 000604 header type 01
[ 0.184000] pci 0000:06:01.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.184000] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[ 0.184000] pci 0000:06:01.0: PME# disabled
[ 0.184029] pci 0000:06:02.0: found [10b5:8613] class 000604 header type 01
[ 0.184088] pci 0000:06:02.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.184130] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[ 0.184170] pci 0000:06:02.0: PME# disabled
[ 0.184283] PCI: Fixups for bus 0000:06
[ 0.184293] pci 0000:05:00.0: bridge io port: [0xa000-0xbfff]
[ 0.184298] pci 0000:05:00.0: bridge 32bit mmio: [0xfe400000-0xfe5fffff]
[ 0.184309] pci 0000:06:01.0: scanning behind bridge, config 080806, pass 0
[ 0.184322] PCI: Scanning bus 0000:08
[ 0.184358] pci 0000:08:00.0: found [1033:0194] class 000c03 header type 00
[ 0.184405] pci 0000:08:00.0: reg 10 64bit mmio: [0xfe5fe000-0xfe5fffff]
[ 0.184458] pci 0000:08:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.184461] pci 0000:08:00.0: Disabling memory decoding and releasing memory resources.
[ 0.184561] pci 0000:08:00.0: PME# supported from D0 D3hot
[ 0.184602] pci 0000:08:00.0: PME# disabled
[ 0.184728] PCI: Fixups for bus 0000:08
[ 0.184740] pci 0000:06:01.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff]
[ 0.184749] PCI: Bus scan for 0000:08 returning with max=08
[ 0.184755] pci 0000:06:02.0: scanning behind bridge, config 070706, pass 0
[ 0.184764] PCI: Scanning bus 0000:07
[ 0.184793] pci 0000:07:00.0: found [1b4b:9123] class 000106 header type 00
[ 0.184824] pci 0000:07:00.0: reg 10 io port: [0xb800-0xb807]
[ 0.184834] pci 0000:07:00.0: reg 14 io port: [0xb400-0xb403]
[ 0.184844] pci 0000:07:00.0: reg 18 io port: [0xb000-0xb007]
[ 0.184854] pci 0000:07:00.0: reg 1c io port: [0xa800-0xa803]
[ 0.184865] pci 0000:07:00.0: reg 20 io port: [0xa400-0xa40f]
[ 0.184875] pci 0000:07:00.0: reg 24 32bit mmio: [0xfe4ff800-0xfe4fffff]
[ 0.184885] pci 0000:07:00.0: reg 30 32bit mmio pref: [0xfe4e0000-0xfe4effff]
[ 0.184892] pci 0000:07:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.184937] pci 0000:07:00.0: PME# supported from D3hot
[ 0.184977] pci 0000:07:00.0: PME# disabled
[ 0.185112] PCI: Fixups for bus 0000:07
[ 0.185121] pci 0000:06:02.0: bridge io port: [0xa000-0xbfff]
[ 0.185126] pci 0000:06:02.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
[ 0.185135] PCI: Bus scan for 0000:07 returning with max=07
[ 0.185141] pci 0000:06:01.0: scanning behind bridge, config 080806, pass 1
[ 0.185150] pci 0000:06:02.0: scanning behind bridge, config 070706, pass 1
[ 0.185158] PCI: Bus scan for 0000:06 returning with max=08
[ 0.185163] pci 0000:05:00.0: scanning behind bridge, config 080605, pass 1
[ 0.185170] PCI: Bus scan for 0000:05 returning with max=08
[ 0.185175] pci 0000:00:0d.0: scanning behind bridge, config 040400, pass 0
[ 0.185183] PCI: Scanning bus 0000:04
[ 0.185218] pci 0000:04:00.0: found [1033:0194] class 000c03 header type 00
[ 0.185257] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe2fe000-0xfe2fffff]
[ 0.185301] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.185304] pci 0000:04:00.0: Disabling memory decoding and releasing memory resources.
[ 0.185394] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.185435] pci 0000:04:00.0: PME# disabled
[ 0.185561] PCI: Fixups for bus 0000:04
[ 0.185573] pci 0000:00:0d.0: bridge 32bit mmio: [0xfe200000-0xfe2fffff]
[ 0.185581] PCI: Bus scan for 0000:04 returning with max=04
[ 0.185586] pci 0000:00:14.4: scanning behind bridge, config 030300, pass 0
[ 0.185595] PCI: Scanning bus 0000:03
[ 0.185632] pci 0000:03:06.0: found [13f6:0111] class 000401 header type 00
[ 0.185667] pci 0000:03:06.0: reg 10 io port: [0x9800-0x98ff]
[ 0.185732] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1b5
[ 0.185734] pci 0000:03:06.0: Disabling memory decoding and releasing memory resources.
[ 0.185808] pci 0000:03:06.0: supports D1 D2
[ 0.185882] PCI: Fixups for bus 0000:03
[ 0.185884] pci 0000:00:14.4: transparent bridge
[ 0.185923] pci 0000:00:14.4: bridge io port: [0x9000-0x9fff]
[ 0.185932] PCI: Bus scan for 0000:03 returning with max=03
[ 0.185938] pci 0000:00:15.0: scanning behind bridge, config 020200, pass 0
[ 0.185946] PCI: Scanning bus 0000:02
[ 0.186016] PCI: Fixups for bus 0000:02
[ 0.186035] PCI: Bus scan for 0000:02 returning with max=02
[ 0.186040] pci 0000:00:02.0: scanning behind bridge, config 0d0d00, pass 1
[ 0.186047] pci 0000:00:05.0: scanning behind bridge, config 0c0c00, pass 1
[ 0.186055] pci 0000:00:06.0: scanning behind bridge, config 0b0b00, pass 1
[ 0.186062] pci 0000:00:0a.0: scanning behind bridge, config 0a0900, pass 1
[ 0.186070] pci 0000:00:0b.0: scanning behind bridge, config 080500, pass 1
[ 0.186077] pci 0000:00:0d.0: scanning behind bridge, config 040400, pass 1
[ 0.186087] pci 0000:00:14.4: scanning behind bridge, config 030300, pass 1
[ 0.186096] pci 0000:00:15.0: scanning behind bridge, config 020200, pass 1
[ 0.186103] PCI: Bus scan for 0000:00 returning with max=0d
[ 0.186105] pci_bus 0000:00: on NUMA node 0
[ 0.186114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.186604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.186751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
[ 0.186875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
[ 0.187019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
[ 0.187143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT]
[ 0.187278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT]
[ 0.187433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.187652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.316081] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
[ 0.316594] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
[ 0.317108] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 14 15)
[ 0.317622] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
[ 0.318110] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 14 15)
[ 0.318542] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
[ 0.318978] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
[ 0.319423] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.320732] sync cpu 0 get result 1 max_id 5
[ 0.320877] sync cpu 1 get result 1 max_id 5
[ 0.321017] sync cpu 2 get result 1 max_id 5
[ 0.321162] sync cpu 3 get result 1 max_id 5
[ 0.321301] sync cpu 4 get result 1 max_id 5
[ 0.321448] sync cpu 5 get result 1 max_id 5
[ 0.321767] xen_balloon: Initialising balloon driver with page order 0.
[ 0.322618] vgaarb: device added: PCI:0000:0d:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.322688] vgaarb: loaded
[ 0.323905] SCSI subsystem initialized
[ 0.324490] libata version 3.00 loaded.
[ 0.325185] usbcore: registered new interface driver usbfs
[ 0.325525] usbcore: registered new interface driver hub
[ 0.325821] usbcore: registered new device driver usb
[ 0.326699] PCI: Using ACPI for IRQ routing
[ 0.328640] Switching to clocksource xen
[ 0.338647] pnp: PnP ACPI init
[ 0.338719] ACPI: bus type pnp registered
[ 0.341110] xen: registering gsi 8 triggering 1 polarity 0
[ 0.341113] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.341151] xen: --> irq=8
[ 0.341951] xen: registering gsi 13 triggering 1 polarity 0
[ 0.341954] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.341992] xen: --> irq=13
[ 0.343147] xen: registering gsi 4 triggering 1 polarity 0
[ 0.343149] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.343187] xen: --> irq=4
[ 0.343190] Already setup the GSI :4
[ 0.347969] pnp: PnP ACPI: found 14 devices
[ 0.348015] ACPI: ACPI bus type pnp unregistered
[ 0.348015] system 00:01: iomem range 0xfec20000-0xfec200ff could not be reserved
[ 0.348015] system 00:02: iomem range 0xf6000000-0xf6003fff has been reserved
[ 0.350718] system 00:08: ioport range 0x600-0x6df has been reserved
[ 0.350758] system 00:08: ioport range 0xae0-0xaef has been reserved
[ 0.350807] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.350850] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.350898] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.350937] system 00:0b: ioport range 0x40b-0x40b has been reserved
[ 0.350977] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
[ 0.351019] system 00:0b: ioport range 0xc00-0xc01 has been reserved
[ 0.351058] system 00:0b: ioport range 0xc14-0xc14 has been reserved
[ 0.351097] system 00:0b: ioport range 0xc50-0xc51 has been reserved
[ 0.351136] system 00:0b: ioport range 0xc52-0xc52 has been reserved
[ 0.351175] system 00:0b: ioport range 0xc6c-0xc6c has been reserved
[ 0.351214] system 00:0b: ioport range 0xc6f-0xc6f has been reserved
[ 0.351253] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved
[ 0.351292] system 00:0b: ioport range 0xcd2-0xcd3 has been reserved
[ 0.351331] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved
[ 0.351371] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved
[ 0.351410] system 00:0b: ioport range 0xcd8-0xcdf has been reserved
[ 0.351449] system 00:0b: ioport range 0x800-0x89f has been reserved
[ 0.351488] system 00:0b: ioport range 0xb00-0xb1f has been reserved
[ 0.351527] system 00:0b: ioport range 0xb20-0xb3f has been reserved
[ 0.351566] system 00:0b: ioport range 0x900-0x90f has been reserved
[ 0.351605] system 00:0b: ioport range 0x910-0x91f has been reserved
[ 0.351645] system 00:0b: ioport range 0xfe00-0xfefe has been reserved
[ 0.351685] system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.351724] system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.351764] system 00:0b: iomem range 0xfed80000-0xfed80fff has been reserved
[ 0.351812] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.351860] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.351901] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.351940] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.351980] system 00:0d: iomem range 0x100000-0xc7ffffff could not be reserved
[ 0.352068] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.352319] pciback: wants to seize 0000:03:06.0
[ 0.352332] pciback: wants to seize 0000:04:00.0
[ 0.352335] pciback: wants to seize 0000:08:00.0
[ 0.352338] pciback: wants to seize 0000:0a:01.0
[ 0.352341] pciback: wants to seize 0000:0a:01.1
[ 0.352343] pciback: wants to seize 0000:0a:01.2
[ 0.352384] pciback 0000:00:00.0: probing...
[ 0.352409] pciback 0000:00:00.2: probing...
[ 0.352427] pciback 0000:00:02.0: probing...
[ 0.352444] pciback 0000:00:05.0: probing...
[ 0.352460] pciback 0000:00:06.0: probing...
[ 0.352477] pciback 0000:00:0a.0: probing...
[ 0.352493] pciback 0000:00:0b.0: probing...
[ 0.352510] pciback 0000:00:0d.0: probing...
[ 0.352527] pciback 0000:00:11.0: probing...
[ 0.352548] pciback 0000:00:12.0: probing...
[ 0.352563] pciback 0000:00:12.2: probing...
[ 0.352578] pciback 0000:00:13.0: probing...
[ 0.352593] pciback 0000:00:13.2: probing...
[ 0.352608] pciback 0000:00:14.0: probing...
[ 0.352622] pciback 0000:00:14.3: probing...
[ 0.352638] pciback 0000:00:14.4: probing...
[ 0.352653] pciback 0000:00:14.5: probing...
[ 0.352669] pciback 0000:00:15.0: probing...
[ 0.352685] pciback 0000:00:16.0: probing...
[ 0.352703] pciback 0000:00:16.2: probing...
[ 0.352717] pciback 0000:00:18.0: probing...
[ 0.352732] pciback 0000:00:18.1: probing...
[ 0.352746] pciback 0000:00:18.2: probing...
[ 0.352762] pciback 0000:00:18.3: probing...
[ 0.352777] pciback 0000:00:18.4: probing...
[ 0.352792] pciback 0000:0d:00.0: probing...
[ 0.352807] pciback 0000:0d:00.1: probing...
[ 0.352821] pciback 0000:0c:00.0: probing...
[ 0.352836] pciback 0000:0b:00.0: probing...
[ 0.352851] pciback 0000:09:00.0: probing...
[ 0.352866] pciback 0000:0a:01.0: probing...
[ 0.352868] pciback 0000:0a:01.0: seizing device
[ 0.352905] pciback 0000:0a:01.0: pcistub_device_alloc
[ 0.352914] pciback 0000:0a:01.0: deferring initialization
[ 0.352926] pciback 0000:0a:01.1: probing...
[ 0.352928] pciback 0000:0a:01.1: seizing device
[ 0.352964] pciback 0000:0a:01.1: pcistub_device_alloc
[ 0.352966] pciback 0000:0a:01.1: deferring initialization
[ 0.352977] pciback 0000:0a:01.2: probing...
[ 0.352979] pciback 0000:0a:01.2: seizing device
[ 0.353013] pciback 0000:0a:01.2: pcistub_device_alloc
[ 0.353016] pciback 0000:0a:01.2: deferring initialization
[ 0.353027] pciback 0000:05:00.0: probing...
[ 0.353043] pciback 0000:06:01.0: probing...
[ 0.353058] pciback 0000:06:02.0: probing...
[ 0.353073] pciback 0000:08:00.0: probing...
[ 0.353075] pciback 0000:08:00.0: seizing device
[ 0.353110] pciback 0000:08:00.0: pcistub_device_alloc
[ 0.353113] pciback 0000:08:00.0: deferring initialization
[ 0.353124] pciback 0000:07:00.0: probing...
[ 0.353139] pciback 0000:04:00.0: probing...
[ 0.353141] pciback 0000:04:00.0: seizing device
[ 0.353176] pciback 0000:04:00.0: pcistub_device_alloc
[ 0.353178] pciback 0000:04:00.0: deferring initialization
[ 0.353189] pciback 0000:03:06.0: probing...
[ 0.353191] pciback 0000:03:06.0: seizing device
[ 0.353226] pciback 0000:03:06.0: pcistub_device_alloc
[ 0.353229] pciback 0000:03:06.0: deferring initialization
[ 0.357501] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.357738] pci 0000:00:02.0: PCI bridge, secondary bus 0000:0d
[ 0.357776] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.357817] pci 0000:00:02.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.357856] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.357903] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0c
[ 0.357940] pci 0000:00:05.0: IO window: 0xd000-0xdfff
[ 0.357980] pci 0000:00:05.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.358019] pci 0000:00:05.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.358065] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0b
[ 0.358102] pci 0000:00:06.0: IO window: 0xc000-0xcfff
[ 0.358142] pci 0000:00:06.0: MEM window: 0xfe700000-0xfe7fffff
[ 0.358181] pci 0000:00:06.0: PREFETCH window: 0x000000cfe00000-0x000000cfefffff
[ 0.358230] pciback 0000:0a:01.0: BAR 0: got res [0xfe600000-0xfe600fff] bus [0xfe600000-0xfe600fff] flags 0x20200
[ 0.358238] pciback 0000:0a:01.0: BAR 0: moved to bus [0xfe600000-0xfe600fff] flags 0x20200
[ 0.358241] pciback 0000:0a:01.1: BAR 0: got res [0xfe601000-0xfe601fff] bus [0xfe601000-0xfe601fff] flags 0x20200
[ 0.358249] pciback 0000:0a:01.1: BAR 0: moved to bus [0xfe601000-0xfe601fff] flags 0x20200
[ 0.358252] pciback 0000:0a:01.2: BAR 0: got res [0xfe602000-0xfe602fff] bus [0xfe602000-0xfe602fff] flags 0x20200
[ 0.358259] pciback 0000:0a:01.2: BAR 0: moved to bus [0xfe602000-0xfe602fff] flags 0x20200
[ 0.358261] pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
[ 0.358297] pci 0000:09:00.0: IO window: disabled
[ 0.358339] pci 0000:09:00.0: MEM window: 0xfe600000-0xfe6fffff
[ 0.358380] pci 0000:09:00.0: PREFETCH window: disabled
[ 0.358425] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:09
[ 0.358461] pci 0000:00:0a.0: IO window: disabled
[ 0.358500] pci 0000:00:0a.0: MEM window: 0xfe600000-0xfe6fffff
[ 0.358539] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.358585] pciback 0000:08:00.0: BAR 0: got res [0xfe500000-0xfe501fff] bus [0xfe500000-0xfe501fff] flags 0x120204
[ 0.358599] pciback 0000:08:00.0: BAR 0: moved to bus [0xfe500000-0xfe501fff] flags 0x120204
[ 0.358601] pci 0000:06:01.0: PCI bridge, secondary bus 0000:08
[ 0.358636] pci 0000:06:01.0: IO window: disabled
[ 0.358677] pci 0000:06:01.0: MEM window: 0xfe500000-0xfe5fffff
[ 0.358717] pci 0000:06:01.0: PREFETCH window: disabled
[ 0.358799] pci 0000:06:02.0: PCI bridge, secondary bus 0000:07
[ 0.358839] pci 0000:06:02.0: IO window: 0xa000-0xbfff
[ 0.358883] pci 0000:06:02.0: MEM window: 0xfe400000-0xfe4fffff
[ 0.358926] pci 0000:06:02.0: PREFETCH window: disabled
[ 0.358980] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
[ 0.359021] pci 0000:05:00.0: IO window: 0xa000-0xbfff
[ 0.359065] pci 0000:05:00.0: MEM window: 0xfe400000-0xfe5fffff
[ 0.359108] pci 0000:05:00.0: PREFETCH window: disabled
[ 0.359171] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05
[ 0.359210] pci 0000:00:0b.0: IO window: 0xa000-0xbfff
[ 0.359251] pci 0000:00:0b.0: MEM window: 0xfe300000-0xfe5fffff
[ 0.359295] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.359339] pciback 0000:04:00.0: BAR 0: got res [0xfe200000-0xfe201fff] bus [0xfe200000-0xfe201fff] flags 0x120204
[ 0.359350] pciback 0000:04:00.0: BAR 0: moved to bus [0xfe200000-0xfe201fff] flags 0x120204
[ 0.359352] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.359389] pci 0000:00:0d.0: IO window: disabled
[ 0.359430] pci 0000:00:0d.0: MEM window: 0xfe200000-0xfe2fffff
[ 0.359471] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.359514] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.359587] pci 0000:00:14.4: IO window: 0x9000-0x9fff
[ 0.359629] pci 0000:00:14.4: MEM window: disabled
[ 0.359670] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.359715] pci 0000:00:15.0: PCI bridge, secondary bus 0000:02
[ 0.359753] pci 0000:00:15.0: IO window: disabled
[ 0.359795] pci 0000:00:15.0: MEM window: disabled
[ 0.359835] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.359890] xen: registering gsi 52 triggering 0 polarity 1
[ 0.359900] xen: --> irq=52
[ 0.359907] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 0.359949] pci 0000:00:02.0: setting latency timer to 64
[ 0.359961] xen: registering gsi 52 triggering 0 polarity 1
[ 0.359963] xen_allocate_pirq: returning irq 52 for gsi 52
[ 0.359998] xen: --> irq=52
[ 0.360005] Already setup the GSI :52
[ 0.360018] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 0.360018] pci 0000:00:05.0: setting latency timer to 64
[ 0.360018] xen: registering gsi 53 triggering 0 polarity 1
[ 0.360160] xen: --> irq=53
[ 0.360165] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 0.360215] pci 0000:00:06.0: setting latency timer to 64
[ 0.360228] xen: registering gsi 54 triggering 0 polarity 1
[ 0.360237] xen: --> irq=54
[ 0.360244] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 0.360286] pci 0000:00:0a.0: setting latency timer to 64
[ 0.360305] pci 0000:09:00.0: setting latency timer to 64
[ 0.360318] xen: registering gsi 54 triggering 0 polarity 1
[ 0.360320] xen_allocate_pirq: returning irq 54 for gsi 54
[ 0.360359] xen: --> irq=54
[ 0.360361] Already setup the GSI :54
[ 0.360404] pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 0.360446] pci 0000:00:0b.0: setting latency timer to 64
[ 0.360460] xen: registering gsi 32 triggering 0 polarity 1
[ 0.360466] xen: --> irq=32
[ 0.360471] pci 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.360514] pci 0000:05:00.0: setting latency timer to 64
[ 0.360539] xen: registering gsi 33 triggering 0 polarity 1
[ 0.360545] xen: --> irq=33
[ 0.360550] pci 0000:06:01.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 0.360592] pci 0000:06:01.0: setting latency timer to 64
[ 0.360604] xen: registering gsi 34 triggering 0 polarity 1
[ 0.360609] xen: --> irq=34
[ 0.360614] pci 0000:06:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[ 0.360655] pci 0000:06:02.0: setting latency timer to 64
[ 0.360667] xen: registering gsi 54 triggering 0 polarity 1
[ 0.360669] xen_allocate_pirq: returning irq 54 for gsi 54
[ 0.360706] xen: --> irq=54
[ 0.360707] Already setup the GSI :54
[ 0.360744] pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 0.360785] pci 0000:00:0d.0: setting latency timer to 64
[ 0.360804] xen: registering gsi 16 triggering 0 polarity 1
[ 0.360810] xen: --> irq=16
[ 0.360816] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.360858] pci 0000:00:15.0: setting latency timer to 64
[ 0.360863] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.360865] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.360867] pci_bus 0000:0d: resource 0 io: [0xe000-0xefff]
[ 0.360869] pci_bus 0000:0d: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.360871] pci_bus 0000:0d: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.360873] pci_bus 0000:0c: resource 0 io: [0xd000-0xdfff]
[ 0.360875] pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.360877] pci_bus 0000:0c: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.360879] pci_bus 0000:0b: resource 0 io: [0xc000-0xcfff]
[ 0.360881] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff]
[ 0.360883] pci_bus 0000:0b: resource 2 pref mem [0xcfe00000-0xcfefffff]
[ 0.360885] pci_bus 0000:09: resource 1 mem: [0xfe600000-0xfe6fffff]
[ 0.360887] pci_bus 0000:0a: resource 1 mem: [0xfe600000-0xfe6fffff]
[ 0.360889] pci_bus 0000:05: resource 0 io: [0xa000-0xbfff]
[ 0.360890] pci_bus 0000:05: resource 1 mem: [0xfe300000-0xfe5fffff]
[ 0.360892] pci_bus 0000:06: resource 0 io: [0xa000-0xbfff]
[ 0.360894] pci_bus 0000:06: resource 1 mem: [0xfe400000-0xfe5fffff]
[ 0.360896] pci_bus 0000:08: resource 1 mem: [0xfe500000-0xfe5fffff]
[ 0.360898] pci_bus 0000:07: resource 0 io: [0xa000-0xbfff]
[ 0.360900] pci_bus 0000:07: resource 1 mem: [0xfe400000-0xfe4fffff]
[ 0.360902] pci_bus 0000:04: resource 1 mem: [0xfe200000-0xfe2fffff]
[ 0.360904] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff]
[ 0.360906] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.360908] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.361248] NET: Registered protocol family 2
[ 0.361656] IP route cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.362888] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.363198] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[ 0.364150] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.364150] TCP reno registered
[ 0.366359] NET: Registered protocol family 1
[ 0.366432] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366437] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366440] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.366446] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366449] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366451] pci 0000:00:00.2: calling pci_fixup_video+0x0/0xbb
[ 0.366456] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366459] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366461] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xbb
[ 0.366466] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366469] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366471] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xbb
[ 0.366476] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366479] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366481] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xbb
[ 0.366486] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366489] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366491] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xbb
[ 0.366496] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366499] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366501] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xbb
[ 0.366506] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366509] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366511] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xbb
[ 0.366516] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x41
[ 0.366526] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366529] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.366531] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xbb
[ 0.366536] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.366539] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.392344] pci 0000:00:12.0: calling pci_fixup_video+0x0/0xbb
[ 0.392353] pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.392357] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.392396] pci 0000:00:12.2: calling pci_fixup_video+0x0/0xbb
[ 0.392402] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.392405] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.416241] pci 0000:00:13.0: calling pci_fixup_video+0x0/0xbb
[ 0.416272] pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.416284] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.416362] pci 0000:00:13.2: calling pci_fixup_video+0x0/0xbb
[ 0.416368] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.416371] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.416373] pci 0000:00:14.0: calling pci_fixup_video+0x0/0xbb
[ 0.416378] pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x22
[ 0.416381] pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.416383] pci 0000:00:14.3: calling pci_fixup_video+0x0/0xbb
[ 0.416388] pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x22
[ 0.416390] pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.416393] pci 0000:00:14.4: calling pci_fixup_video+0x0/0xbb
[ 0.416397] pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x22
[ 0.416400] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.440251] pci 0000:00:14.5: calling pci_fixup_video+0x0/0xbb
[ 0.440281] pci 0000:00:15.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.440293] pci 0000:00:15.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.440303] pci 0000:00:15.0: calling pci_fixup_video+0x0/0xbb
[ 0.440337] pci 0000:00:16.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.440340] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464239] pci 0000:00:16.0: calling pci_fixup_video+0x0/0xbb
[ 0.464269] pci 0000:00:16.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464281] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464360] pci 0000:00:16.2: calling pci_fixup_video+0x0/0xbb
[ 0.464365] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464368] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464370] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xbb
[ 0.464375] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464378] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464380] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xbb
[ 0.464385] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464388] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464390] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xbb
[ 0.464395] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464397] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464400] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xbb
[ 0.464405] pci 0000:00:18.4: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464407] pci 0000:00:18.4: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464410] pci 0000:00:18.4: calling pci_fixup_video+0x0/0xbb
[ 0.464414] pci 0000:0d:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464417] pci 0000:0d:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464419] pci 0000:0d:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464426] pci 0000:0d:00.0: Boot video device
[ 0.464430] pci 0000:0d:00.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464433] pci 0000:0d:00.1: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464435] pci 0000:0d:00.1: calling pci_fixup_video+0x0/0xbb
[ 0.464440] pci 0000:0c:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464443] pci 0000:0c:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464445] pci 0000:0c:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464450] pci 0000:0b:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464453] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464455] pci 0000:0b:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464460] pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464462] pci 0000:09:00.0: calling quirk_xio2000a+0x0/0x9c
[ 0.464464] pci 0000:09:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 0.464530] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464532] pci 0000:09:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464537] pciback 0000:0a:01.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464540] pciback 0000:0a:01.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464545] pciback 0000:0a:01.0: calling pci_fixup_video+0x0/0xbb
[ 0.464550] pciback 0000:0a:01.1: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464553] pciback 0000:0a:01.1: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464558] pciback 0000:0a:01.1: calling pci_fixup_video+0x0/0xbb
[ 0.464563] pciback 0000:0a:01.2: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464566] pciback 0000:0a:01.2: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464571] pciback 0000:0a:01.2: calling pci_fixup_video+0x0/0xbb
[ 0.464576] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464579] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464581] pci 0000:05:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464586] pci 0000:06:01.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464589] pci 0000:06:01.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464591] pci 0000:06:01.0: calling pci_fixup_video+0x0/0xbb
[ 0.464596] pci 0000:06:02.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464598] pci 0000:06:02.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464601] pci 0000:06:02.0: calling pci_fixup_video+0x0/0xbb
[ 0.464605] pciback 0000:08:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464608] pciback 0000:08:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464613] pciback 0000:08:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464618] pci 0000:07:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464621] pci 0000:07:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464623] pci 0000:07:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464628] pciback 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464631] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464635] pciback 0000:04:00.0: calling pci_fixup_video+0x0/0xbb
[ 0.464640] pciback 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x22
[ 0.464643] pciback 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x5f4
[ 0.464645] pciback 0000:03:06.0: calling pci_fixup_video+0x0/0xbb
[ 0.464950] Trying to unpack rootfs image as initramfs...
[ 0.648017] Freeing initrd memory: 183885k freed
[ 0.734123] DMA-API: preallocated 32768 debug entries
[ 0.734165] DMA-API: debugging enabled by kernel config
[ 0.734203] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.734241] DMA: Placing 64MB software IO TLB between ffff88000eb5d000 - ffff880012b5d000
[ 0.734283] DMA: software IO TLB at phys 0xeb5d000 - 0x12b5d000
[ 0.743571] audit: initializing netlink socket (disabled)
[ 0.743671] type=2000 audit(1281442470.884:1): initialized
[ 0.745053] VFS: Disk quotas dquot_6.5.2
[ 0.745269] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.746924] Btrfs loaded
[ 0.746971] msgmni has been set to 1328
[ 0.748368] alg: No test for stdrng (krng)
[ 0.748771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.748853] io scheduler noop registered
[ 0.748890] io scheduler anticipatory registered
[ 0.748927] io scheduler deadline registered
[ 0.749123] io scheduler cfq registered (default)
[ 0.749988] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.750428] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.750877] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.751284] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.751876] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.757272] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.762865] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.763546] pcieport 0000:05:00.0: setting latency timer to 64
[ 0.764249] pcieport 0000:06:01.0: setting latency timer to 64
[ 0.764897] pcieport 0000:06:02.0: setting latency timer to 64
[ 0.765881] pci-stub: invalid id string ""
[ 0.767223] Event-channel device installed.
[ 0.767450] pciback: pcistub_init_devices_late
[ 0.767453] pciback 0000:03:06.0: initializing...
[ 0.767455] pciback 0000:03:06.0: initializing config
[ 0.767457] pciback 0000:03:06.0: initializing virtual configuration space
[ 0.767460] pciback 0000:03:06.0: added config field at offset 0x00
[ 0.767462] pciback 0000:03:06.0: added config field at offset 0x02
[ 0.767464] pciback 0000:03:06.0: added config field at offset 0x04
[ 0.767466] pciback 0000:03:06.0: added config field at offset 0x3c
[ 0.767468] pciback 0000:03:06.0: added config field at offset 0x3d
[ 0.767470] pciback 0000:03:06.0: added config field at offset 0x0c
[ 0.767472] pciback 0000:03:06.0: added config field at offset 0x0d
[ 0.767475] pciback 0000:03:06.0: added config field at offset 0x0f
[ 0.767477] pciback 0000:03:06.0: added config field at offset 0x10
[ 0.767480] pciback 0000:03:06.0: added config field at offset 0x14
[ 0.767488] pciback 0000:03:06.0: added config field at offset 0x18
[ 0.767490] pciback 0000:03:06.0: added config field at offset 0x1c
[ 0.767492] pciback 0000:03:06.0: added config field at offset 0x20
[ 0.767495] pciback 0000:03:06.0: added config field at offset 0x24
[ 0.767497] pciback 0000:03:06.0: added config field at offset 0x30
[ 0.767519] pciback 0000:03:06.0: Found capability 0x1 at 0xc0
[ 0.767521] pciback 0000:03:06.0: added config field at offset 0xc0
[ 0.767523] pciback 0000:03:06.0: added config field at offset 0xc2
[ 0.767528] pciback 0000:03:06.0: added config field at offset 0xc4
[ 0.767530] pciback 0000:03:06.0: added config field at offset 0xc6
[ 0.767532] pciback 0000:03:06.0: added config field at offset 0xc7
[ 0.767534] pciback 0000:03:06.0: enabling device
[ 0.767550] xen: registering gsi 22 triggering 0 polarity 1
[ 0.767558] xen: --> irq=22
[ 0.767567] pciback 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.767613] pciback 0000:03:06.0: reset device
[ 0.767621] pciback 0000:03:06.0: PCI INT A disabled
[ 0.767661] pciback 0000:04:00.0: initializing...
[ 0.767663] pciback 0000:04:00.0: initializing config
[ 0.767664] pciback 0000:04:00.0: initializing virtual configuration space
[ 0.767666] pciback 0000:04:00.0: added config field at offset 0x00
[ 0.767669] pciback 0000:04:00.0: added config field at offset 0x02
[ 0.767671] pciback 0000:04:00.0: added config field at offset 0x04
[ 0.767673] pciback 0000:04:00.0: added config field at offset 0x3c
[ 0.767675] pciback 0000:04:00.0: added config field at offset 0x3d
[ 0.767677] pciback 0000:04:00.0: added config field at offset 0x0c
[ 0.767679] pciback 0000:04:00.0: added config field at offset 0x0d
[ 0.767681] pciback 0000:04:00.0: added config field at offset 0x0f
[ 0.767683] pciback 0000:04:00.0: added config field at offset 0x10
[ 0.767685] pciback 0000:04:00.0: added config field at offset 0x14
[ 0.767688] pciback 0000:04:00.0: added config field at offset 0x18
[ 0.767690] pciback 0000:04:00.0: added config field at offset 0x1c
[ 0.767692] pciback 0000:04:00.0: added config field at offset 0x20
[ 0.767698] pciback 0000:04:00.0: added config field at offset 0x24
[ 0.767701] pciback 0000:04:00.0: added config field at offset 0x30
[ 0.767727] pciback 0000:04:00.0: Found capability 0x1 at 0x50
[ 0.767729] pciback 0000:04:00.0: added config field at offset 0x50
[ 0.767731] pciback 0000:04:00.0: added config field at offset 0x52
[ 0.767735] pciback 0000:04:00.0: added config field at offset 0x54
[ 0.767737] pciback 0000:04:00.0: added config field at offset 0x56
[ 0.767739] pciback 0000:04:00.0: added config field at offset 0x57
[ 0.767741] pciback 0000:04:00.0: enabling device
[ 0.767751] pciback 0000:04:00.0: enabling device (0104 -> 0106)
[ 0.767790] xen: registering gsi 40 triggering 0 polarity 1
[ 0.767796] xen: --> irq=40
[ 0.767801] pciback 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 0.767838] pciback 0000:04:00.0: reset device
[ 0.767844] pciback 0000:04:00.0: PCI INT A disabled
[ 0.767883] pciback 0000:08:00.0: initializing...
[ 0.767885] pciback 0000:08:00.0: initializing config
[ 0.767886] pciback 0000:08:00.0: initializing virtual configuration space
[ 0.767888] pciback 0000:08:00.0: added config field at offset 0x00
[ 0.767890] pciback 0000:08:00.0: added config field at offset 0x02
[ 0.767892] pciback 0000:08:00.0: added config field at offset 0x04
[ 0.767894] pciback 0000:08:00.0: added config field at offset 0x3c
[ 0.767896] pciback 0000:08:00.0: added config field at offset 0x3d
[ 0.767898] pciback 0000:08:00.0: added config field at offset 0x0c
[ 0.767900] pciback 0000:08:00.0: added config field at offset 0x0d
[ 0.767903] pciback 0000:08:00.0: added config field at offset 0x0f
[ 0.767905] pciback 0000:08:00.0: added config field at offset 0x10
[ 0.767907] pciback 0000:08:00.0: added config field at offset 0x14
[ 0.767909] pciback 0000:08:00.0: added config field at offset 0x18
[ 0.767912] pciback 0000:08:00.0: added config field at offset 0x1c
[ 0.767915] pciback 0000:08:00.0: added config field at offset 0x20
[ 0.767917] pciback 0000:08:00.0: added config field at offset 0x24
[ 0.767919] pciback 0000:08:00.0: added config field at offset 0x30
[ 0.767951] pciback 0000:08:00.0: Found capability 0x1 at 0x50
[ 0.767953] pciback 0000:08:00.0: added config field at offset 0x50
[ 0.767955] pciback 0000:08:00.0: added config field at offset 0x52
[ 0.767959] pciback 0000:08:00.0: added config field at offset 0x54
[ 0.767961] pciback 0000:08:00.0: added config field at offset 0x56
[ 0.767963] pciback 0000:08:00.0: added config field at offset 0x57
[ 0.767965] pciback 0000:08:00.0: enabling device
[ 0.767976] pciback 0000:08:00.0: enabling device (0104 -> 0106)
[ 0.768059] xen: registering gsi 33 triggering 0 polarity 1
[ 0.768062] xen_allocate_pirq: returning irq 33 for gsi 33
[ 0.768104] xen: --> irq=33
[ 0.768121] Already setup the GSI :33
[ 0.768161] pciback 0000:08:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 0.768201] pciback 0000:08:00.0: reset device
[ 0.768215] pciback 0000:08:00.0: PCI INT A disabled
[ 0.768266] pciback 0000:0a:01.2: initializing...
[ 0.768269] pciback 0000:0a:01.2: initializing config
[ 0.768270] pciback 0000:0a:01.2: initializing virtual configuration space
[ 0.768273] pciback 0000:0a:01.2: added config field at offset 0x00
[ 0.768276] pciback 0000:0a:01.2: added config field at offset 0x02
[ 0.768278] pciback 0000:0a:01.2: added config field at offset 0x04
[ 0.768280] pciback 0000:0a:01.2: added config field at offset 0x3c
[ 0.768282] pciback 0000:0a:01.2: added config field at offset 0x3d
[ 0.768285] pciback 0000:0a:01.2: added config field at offset 0x0c
[ 0.768287] pciback 0000:0a:01.2: added config field at offset 0x0d
[ 0.768289] pciback 0000:0a:01.2: added config field at offset 0x0f
[ 0.768292] pciback 0000:0a:01.2: added config field at offset 0x10
[ 0.768294] pciback 0000:0a:01.2: added config field at offset 0x14
[ 0.768297] pciback 0000:0a:01.2: added config field at offset 0x18
[ 0.768299] pciback 0000:0a:01.2: added config field at offset 0x1c
[ 0.768302] pciback 0000:0a:01.2: added config field at offset 0x20
[ 0.768310] pciback 0000:0a:01.2: added config field at offset 0x24
[ 0.768312] pciback 0000:0a:01.2: added config field at offset 0x30
[ 0.768333] pciback 0000:0a:01.2: Found capability 0x1 at 0x40
[ 0.768336] pciback 0000:0a:01.2: added config field at offset 0x40
[ 0.768338] pciback 0000:0a:01.2: added config field at offset 0x42
[ 0.768343] pciback 0000:0a:01.2: added config field at offset 0x44
[ 0.768345] pciback 0000:0a:01.2: added config field at offset 0x46
[ 0.768348] pciback 0000:0a:01.2: added config field at offset 0x47
[ 0.768350] pciback 0000:0a:01.2: enabling device
[ 0.768363] pciback 0000:0a:01.2: enabling device (0114 -> 0116)
[ 0.768406] xen: registering gsi 46 triggering 0 polarity 1
[ 0.768413] xen: --> irq=46
[ 0.768418] pciback 0000:0a:01.2: PCI INT C -> GSI 46 (level, low) -> IRQ 46
[ 0.768457] pciback 0000:0a:01.2: reset device
[ 0.768465] pciback 0000:0a:01.2: PCI INT C disabled
[ 0.768506] pciback 0000:0a:01.1: initializing...
[ 0.768508] pciback 0000:0a:01.1: initializing config
[ 0.768510] pciback 0000:0a:01.1: initializing virtual configuration space
[ 0.768512] pciback 0000:0a:01.1: added config field at offset 0x00
[ 0.768514] pciback 0000:0a:01.1: added config field at offset 0x02
[ 0.768516] pciback 0000:0a:01.1: added config field at offset 0x04
[ 0.768523] pciback 0000:0a:01.1: added config field at offset 0x3c
[ 0.768525] pciback 0000:0a:01.1: added config field at offset 0x3d
[ 0.768527] pciback 0000:0a:01.1: added config field at offset 0x0c
[ 0.768529] pciback 0000:0a:01.1: added config field at offset 0x0d
[ 0.768531] pciback 0000:0a:01.1: added config field at offset 0x0f
[ 0.768535] pciback 0000:0a:01.1: added config field at offset 0x10
[ 0.768537] pciback 0000:0a:01.1: added config field at offset 0x14
[ 0.768539] pciback 0000:0a:01.1: added config field at offset 0x18
[ 0.768541] pciback 0000:0a:01.1: added config field at offset 0x1c
[ 0.768544] pciback 0000:0a:01.1: added config field at offset 0x20
[ 0.768546] pciback 0000:0a:01.1: added config field at offset 0x24
[ 0.768549] pciback 0000:0a:01.1: added config field at offset 0x30
[ 0.768569] pciback 0000:0a:01.1: Found capability 0x1 at 0x40
[ 0.768571] pciback 0000:0a:01.1: added config field at offset 0x40
[ 0.768573] pciback 0000:0a:01.1: added config field at offset 0x42
[ 0.768577] pciback 0000:0a:01.1: added config field at offset 0x44
[ 0.768579] pciback 0000:0a:01.1: added config field at offset 0x46
[ 0.768581] pciback 0000:0a:01.1: added config field at offset 0x47
[ 0.768583] pciback 0000:0a:01.1: enabling device
[ 0.768595] pciback 0000:0a:01.1: enabling device (0114 -> 0116)
[ 0.768635] xen: registering gsi 45 triggering 0 polarity 1
[ 0.768641] xen: --> irq=45
[ 0.768645] pciback 0000:0a:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
[ 0.768686] pciback 0000:0a:01.1: reset device
[ 0.768694] pciback 0000:0a:01.1: PCI INT B disabled
[ 0.768733] pciback 0000:0a:01.0: initializing...
[ 0.768735] pciback 0000:0a:01.0: initializing config
[ 0.768736] pciback 0000:0a:01.0: initializing virtual configuration space
[ 0.768738] pciback 0000:0a:01.0: added config field at offset 0x00
[ 0.768741] pciback 0000:0a:01.0: added config field at offset 0x02
[ 0.768743] pciback 0000:0a:01.0: added config field at offset 0x04
[ 0.768745] pciback 0000:0a:01.0: added config field at offset 0x3c
[ 0.768747] pciback 0000:0a:01.0: added config field at offset 0x3d
[ 0.768749] pciback 0000:0a:01.0: added config field at offset 0x0c
[ 0.768751] pciback 0000:0a:01.0: added config field at offset 0x0d
[ 0.768753] pciback 0000:0a:01.0: added config field at offset 0x0f
[ 0.768755] pciback 0000:0a:01.0: added config field at offset 0x10
[ 0.768757] pciback 0000:0a:01.0: added config field at offset 0x14
[ 0.768760] pciback 0000:0a:01.0: added config field at offset 0x18
[ 0.768762] pciback 0000:0a:01.0: added config field at offset 0x1c
[ 0.768764] pciback 0000:0a:01.0: added config field at offset 0x20
[ 0.768770] pciback 0000:0a:01.0: added config field at offset 0x24
[ 0.768772] pciback 0000:0a:01.0: added config field at offset 0x30
[ 0.768792] pciback 0000:0a:01.0: Found capability 0x1 at 0x40
[ 0.768794] pciback 0000:0a:01.0: added config field at offset 0x40
[ 0.768796] pciback 0000:0a:01.0: added config field at offset 0x42
[ 0.768801] pciback 0000:0a:01.0: added config field at offset 0x44
[ 0.768803] pciback 0000:0a:01.0: added config field at offset 0x46
[ 0.768805] pciback 0000:0a:01.0: added config field at offset 0x47
[ 0.768807] pciback 0000:0a:01.0: enabling device
[ 0.768819] pciback 0000:0a:01.0: enabling device (0114 -> 0116)
[ 0.768859] xen: registering gsi 44 triggering 0 polarity 1
[ 0.768865] xen: --> irq=44
[ 0.768869] pciback 0000:0a:01.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[ 0.768906] pciback 0000:0a:01.0: reset device
[ 0.768914] pciback 0000:0a:01.0: PCI INT A disabled
[ 0.774298] blktap_device_init: blktap device major 254
[ 0.774345] blktap_ring_init: blktap ring major: 252
[ 0.779495] registering netback
[ 0.794440] hpet_acpi_add: no address or irqs in _CRS
[ 0.794726] Linux agpgart interface v0.103
[ 0.794766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.806702] brd: module loaded
[ 0.806957] ahci 0000:00:11.0: version 3.0
[ 0.806976] xen: registering gsi 19 triggering 0 polarity 1
[ 0.806986] xen: --> irq=19
[ 0.806998] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.812467] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.812511] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.818433] scsi0 : ahci
[ 0.819287] scsi1 : ahci
[ 0.819812] scsi2 : ahci
[ 0.820475] scsi3 : ahci
[ 0.820983] scsi4 : ahci
[ 0.824075] scsi5 : ahci
[ 0.824884] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 1491
[ 0.824935] ata2: SATA max UDMA/133 abar m1024@0xfe0ff000 port 0xfe0ff180 irq 1491
[ 0.824982] ata3: SATA max UDMA/133 abar m1024@0xfe0ff000 port 0xfe0ff200 irq 1491
[ 0.825028] ata4: SATA max UDMA/133 abar m1024@0xfe0ff000 port 0xfe0ff280 irq 1491
[ 0.825073] ata5: SATA max UDMA/133 abar m1024@0xfe0ff000 port 0xfe0ff300 irq 1491
[ 0.825118] ata6: SATA max UDMA/133 abar m1024@0xfe0ff000 port 0xfe0ff380 irq 1491
[ 0.825301] xen: registering gsi 34 triggering 0 polarity 1
[ 0.825304] xen_allocate_pirq: returning irq 34 for gsi 34
[ 0.825343] xen: --> irq=34
[ 0.825347] Already setup the GSI :34
[ 0.825388] ahci 0000:07:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[ 0.830720] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.830765] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.830815] ahci 0000:07:00.0: setting latency timer to 64
[ 0.836398] scsi6 : ahci
[ 0.837058] scsi7 : ahci
[ 0.837514] ata7: SATA max UDMA/133 abar m2048@0xfe4ff800 port 0xfe4ff900 irq 1490
[ 0.837558] ata8: SATA max UDMA/133 abar m2048@0xfe4ff800 port 0xfe4ff980 irq 1490
[ 0.838352] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 0.838389] Copyright (c) 1999-2006 Intel Corporation.
[ 0.838670] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.838709] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.839022] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 0.839063] Copyright (c) 2007-2009 Intel Corporation.
[ 0.839539] tun: Universal TUN/TAP device driver, 1.6
[ 0.839578] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.840366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.840458] xen: registering gsi 17 triggering 0 polarity 1
[ 0.840466] xen: --> irq=17
[ 0.840475] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.840537] ehci_hcd 0000:00:12.2: enabling bus mastering
[ 0.840549] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.841289] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.841508] ehci_hcd 0000:00:12.2: debug port 1
[ 0.841555] ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval
[ 0.841613] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe0ff400
[ 0.852199] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.852443] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.852483] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.852526] usb usb1: Product: EHCI Host Controller
[ 0.852580] usb usb1: Manufacturer: Linux 2.6.32.17+xen-next-2.6.32.x-20100807 ehci_hcd
[ 0.852622] usb usb1: SerialNumber: 0000:00:12.2
[ 0.853095] usb usb1: configuration #1 chosen from 1 choice
[ 0.853498] hub 1-0:1.0: USB hub found
[ 0.853611] hub 1-0:1.0: 5 ports detected
[ 0.854453] xen: registering gsi 17 triggering 0 polarity 1
[ 0.854456] xen_allocate_pirq: returning irq 17 for gsi 17
[ 0.854494] xen: --> irq=17
[ 0.854497] Already setup the GSI :17
[ 0.854544] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.854605] ehci_hcd 0000:00:13.2: enabling bus mastering
[ 0.854611] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.854937] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.855070] ehci_hcd 0000:00:13.2: debug port 1
[ 0.855115] ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval
[ 0.855129] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe0ff800
[ 0.864178] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.864374] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.864413] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.864458] usb usb2: Product: EHCI Host Controller
[ 0.864506] usb usb2: Manufacturer: Linux 2.6.32.17+xen-next-2.6.32.x-20100807 ehci_hcd
[ 0.864549] usb usb2: SerialNumber: 0000:00:13.2
[ 0.865047] usb usb2: configuration #1 chosen from 1 choice
[ 0.865313] hub 2-0:1.0: USB hub found
[ 0.865417] hub 2-0:1.0: 5 ports detected
[ 0.865916] xen: registering gsi 17 triggering 0 polarity 1
[ 0.865919] xen_allocate_pirq: returning irq 17 for gsi 17
[ 0.865957] xen: --> irq=17
[ 0.865959] Already setup the GSI :17
[ 0.865996] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.866069] ehci_hcd 0000:00:16.2: enabling bus mastering
[ 0.866075] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 0.866418] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 0.866562] ehci_hcd 0000:00:16.2: debug port 1
[ 0.866606] ehci_hcd 0000:00:16.2: enabling Mem-Wr-Inval
[ 0.866620] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe0ffc00
[ 0.876176] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 0.876366] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.876406] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876449] usb usb3: Product: EHCI Host Controller
[ 0.876499] usb usb3: Manufacturer: Linux 2.6.32.17+xen-next-2.6.32.x-20100807 ehci_hcd
[ 0.876542] usb usb3: SerialNumber: 0000:00:16.2
[ 0.877074] usb usb3: configuration #1 chosen from 1 choice
[ 0.877345] hub 3-0:1.0: USB hub found
[ 0.877443] hub 3-0:1.0: 4 ports detected
[ 0.878069] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.878136] xen: registering gsi 18 triggering 0 polarity 1
[ 0.878143] xen: --> irq=18
[ 0.878151] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.878214] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.878551] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 0.878679] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe0fb000
[ 0.936308] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.936350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.936398] usb usb4: Product: OHCI Host Controller
[ 0.936435] usb usb4: Manufacturer: Linux 2.6.32.17+xen-next-2.6.32.x-20100807 ohci_hcd
[ 0.936478] usb usb4: SerialNumber: 0000:00:12.0
[ 0.936846] usb usb4: configuration #1 chosen from 1 choice
[ 0.937139] hub 4-0:1.0: USB hub found
[ 0.937244] hub 4-0:1.0: 5 ports detected
[ 0.937707] xen: registering gsi 18 triggering 0 polarity 1
[ 0.937710] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.937747] xen: --> irq=18
[ 0.937750] Already setup the GSI :18
[ 0.937786] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.937854] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.938188] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.938280] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe0fc000
[ 0.996229] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.996283] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.996327] usb usb5: Product: OHCI Host Controller
[ 0.996369] usb usb5: Manufacturer: Linux 2.6.32.17+xen-next-2.6.32.x-20100807 ohci_hcd
[ 0.996411] usb usb5: SerialNumber: 0000:00:13.0
[ 0.996912] usb usb5: configuration #1 chosen from 1 choice
[ 0.997180] hub 5-0:1.0: USB hub found
[ 0.997281] hub 5-0:1.0: 5 ports detected
[ 0.997756] xen: registering gsi 18 triggering 0 polarity 1
[ 0.997759] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.997797] xen: --> irq=18
[ 0.997800] Already setup the GSI :18
[ 0.997836] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.997910] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.998258] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 0.998354] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe0fd000
[ 1.056272] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.056316] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.056360] usb usb6: Product: OHCI Host Controller
[ 1.056402] usb usb6: Manufacturer: Linux 2.6.32.17+xen-next-2.6.32.x-20100807 ohci_hcd
[ 1.056445] usb usb6: SerialNumber: 0000:00:14.5
[ 1.056807] usb usb6: configuration #1 chosen from 1 choice
[ 1.057098] hub 6-0:1.0: USB hub found
[ 1.057200] hub 6-0:1.0: 2 ports detected
[ 1.057650] xen: registering gsi 18 triggering 0 polarity 1
[ 1.057653] xen_allocate_pirq: returning irq 18 for gsi 18
[ 1.057691] xen: --> irq=18
[ 1.057694] Already setup the GSI :18
[ 1.057731] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.057803] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.058150] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.058245] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe0fe000
[ 1.116269] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.116312] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.116354] usb usb7: Product: OHCI Host Controller
[ 1.116397] usb usb7: Manufacturer: Linux 2.6.32.17+xen-next-2.6.32.x-20100807 ohci_hcd
[ 1.116439] usb usb7: SerialNumber: 0000:00:16.0
[ 1.116794] usb usb7: configuration #1 chosen from 1 choice
[ 1.117136] hub 7-0:1.0: USB hub found
[ 1.117253] hub 7-0:1.0: 4 ports detected
[ 1.117903] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.119131] PNP: No PS/2 controller found. Probing ports directly.
[ 1.119878] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.119941] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.120841] mice: PS/2 mouse device common for all mice
[ 1.121101] rtc_cmos 00:04: RTC can wake from S4
[ 1.121797] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.121884] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.122690] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.123459] device-mapper: multipath: version 1.1.0 loaded
[ 1.123511] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.124924] cpuidle: using governor ladder
[ 1.124996] No iBFT detected.
[ 1.129709] usbcore: registered new interface driver hiddev
[ 1.129922] usbcore: registered new interface driver usbhid
[ 1.129962] usbhid: v2.6:USB HID core driver
[ 1.130918] TCP cubic registered
[ 1.130958] NET: Registered protocol family 17
[ 1.131239] Bridge firewalling registered
[ 1.132105] registered taskstats version 1
[ 1.133666] rtc_cmos 00:04: setting system clock to 2010-08-10 12:14:30 UTC (1281442470)
[ 1.156227] ata7: SATA link down (SStatus 0 SControl 370)
[ 1.156344] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.156399] ata8: SATA link down (SStatus 0 SControl 370)
[ 1.156419] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.156428] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.156457] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.156469] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.372196] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 1.540332] usb 4-2: New USB device found, idVendor=046d, idProduct=c517
[ 1.540383] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.540422] usb 4-2: Product: USB Receiver
[ 1.540459] usb 4-2: Manufacturer: Logitech
[ 1.540822] usb 4-2: configuration #1 chosen from 1 choice
[ 1.548064] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input0
[ 1.548794] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/input0
[ 1.557257] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 1.558283] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input1
[ 1.559441] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input1
[ 1.724181] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.725929] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 1.725969] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.727539] ata1.00: configured for UDMA/133
[ 1.740798] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[ 1.742468] Freeing unused kernel memory: 496k freed
[ 2.213284] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.213394] xen: registering gsi 46 triggering 0 polarity 1
[ 2.213400] xen_allocate_pirq: returning irq 46 for gsi 46
[ 2.213446] xen: --> irq=46
[ 2.213451] Already setup the GSI :46
[ 2.213498] r8169 0000:0c:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
[ 2.213547] r8169 0000:0c:00.0: enabling Mem-Wr-Inval
[ 2.213612] r8169 0000:0c:00.0: setting latency timer to 64
[ 2.214609] eth0: RTL8168d/8111d at 0xffffc900100da000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 1489
[ 2.257220] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.257294] xen: registering gsi 51 triggering 0 polarity 1
[ 2.257304] xen: --> irq=51
[ 2.257311] r8169 0000:0b:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
[ 2.257353] r8169 0000:0b:00.0: enabling Mem-Wr-Inval
[ 2.257393] r8169 0000:0b:00.0: setting latency timer to 64
[ 2.258386] eth1: RTL8168d/8111d at 0xffffc900100de000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 1488
[ 2.275679] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.275909] sd 0:0:0:0: [sda] Write Protect is off
[ 2.275956] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.276054] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.276813] sda: sda1 sda2
[ 2.280773] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.241137] kjournald starting. Commit interval 5 seconds
[ 3.241302] EXT3-fs: mounted filesystem with journal data mode.
[ 4.594938] udevd version 125 started
[ 4.952315] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.952421] ACPI: Power Button [PWRB]
[ 4.952661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.952712] ACPI: Power Button [PWRF]
[ 5.031543] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 5.031902] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 5.032346] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 5.032719] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 5.033091] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 5.033441] ACPI: CPU-1 (power states: C1[C1] C2[C2])
[ 5.154289] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.185470] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.826691] EDAC MC: Ver: 2.1.0 Aug 7 2010
[ 6.168616] ata1.00: configured for UDMA/133
[ 6.168716] ata1: EH complete
[ 6.876175] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.946004] EDAC amd64_edac: Ver: 3.2.0 Aug 7 2010
[ 6.946153] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 6.946238] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.946239] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.946240] (Note that use of the override may cause unknown side effects.)
[ 6.946374] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 6.971988] xen: registering gsi 25 triggering 0 polarity 1
[ 6.972088] xen: --> irq=25
[ 6.972104] HDA Intel 0000:0d:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
[ 6.972364] HDA Intel 0000:0d:00.1: setting latency timer to 64
[ 7.022073] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 7.022200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.041505] ata1.00: configured for UDMA/133
[ 8.041547] ata1: EH complete
[ 8.532269] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 8.544671] EXT3 FS on dm-0, internal journal
[ 9.783443] loop: module loaded
[ 11.015656] fuse init (API version 7.13)
[ 11.321367] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k
[ 12.633189] r8169: eth1: link up
[ 12.633233] r8169: eth1: link up
[ 12.776805] r8169: eth0: link up
[ 12.776849] r8169: eth0: link up
[ 20.703154] nf_conntrack version 0.5.0 (6055 buckets, 24220 max)
[ 20.704758] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 20.707524] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 20.707619] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 20.842177] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.358685] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor processors (6 cpu cores) (version 2.20.00)
[ 26.359103] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 26.359108] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 40.968447] kjournald starting. Commit interval 5 seconds
[ 40.968484] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 40.978837] EXT3 FS on sda1, internal journal
[ 40.979014] EXT3-fs: mounted filesystem with writeback data mode.
[ 41.536029] kjournald starting. Commit interval 5 seconds
[ 41.543929] EXT3 FS on dm-2, internal journal
[ 41.544088] EXT3-fs: mounted filesystem with writeback data mode.
[ 42.079220] kjournald starting. Commit interval 5 seconds
[ 42.085094] EXT3 FS on dm-3, internal journal
[ 42.085270] EXT3-fs: mounted filesystem with writeback data mode.
[ 42.548183] kjournald starting. Commit interval 5 seconds
[ 42.558735] EXT3 FS on dm-4, internal journal
[ 42.558911] EXT3-fs: mounted filesystem with writeback data mode.
[ 42.913738] kjournald starting. Commit interval 5 seconds
[ 42.920691] EXT3 FS on dm-5, internal journal
[ 42.920869] EXT3-fs: mounted filesystem with writeback data mode.
[ 43.225829] kjournald starting. Commit interval 5 seconds
[ 43.236682] EXT3 FS on dm-6, internal journal
[ 43.236858] EXT3-fs: mounted filesystem with writeback data mode.
[ 43.705729] kjournald starting. Commit interval 5 seconds
[ 43.720090] EXT3 FS on dm-9, internal journal
[ 43.720270] EXT3-fs: mounted filesystem with writeback data mode.
[ 44.192864] kjournald starting. Commit interval 5 seconds
[ 44.205300] EXT3 FS on dm-7, internal journal
[ 44.205477] EXT3-fs: mounted filesystem with writeback data mode.
[ 45.354518] XENBUS: Unable to read cpu state
[ 45.354964] XENBUS: Unable to read cpu state
[ 45.355297] XENBUS: Unable to read cpu state
[ 45.355585] XENBUS: Unable to read cpu state
[ 45.355828] XENBUS: Unable to read cpu state
[ 45.356117] XENBUS: Unable to read cpu state
[ 54.350814] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=47092 PROTO=2
[ 57.493530] FW: New not syn:IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.61.43 DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=30861 DF PROTO=TCP SPT=1863 DPT=53450 WINDOW=65465 RES=0x00 ACK PSH URGP=0
[ 57.495265] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.61.43 DST=88.159.69.34 LEN=40 TOS=0x00 PREC=0x00 TTL=111 ID=30897 DF PROTO=TCP SPT=1863 DPT=53450 WINDOW=65465 RES=0x00 ACK FIN URGP=0
[ 58.779401] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.61.43 DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=9582 DF PROTO=TCP SPT=1863 DPT=53450 WINDOW=65465 RES=0x00 ACK PSH FIN URGP=0
[ 61.404480] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.61.43 DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=1483 DF PROTO=TCP SPT=1863 DPT=53450 WINDOW=65465 RES=0x00 ACK PSH FIN URGP=0
[ 66.654314] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.61.43 DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=16906 DF PROTO=TCP SPT=1863 DPT=53450 WINDOW=65465 RES=0x00 ACK PSH FIN URGP=0
[ 77.154212] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.61.43 DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=17337 DF PROTO=TCP SPT=1863 DPT=53450 WINDOW=65465 RES=0x00 ACK PSH FIN URGP=0
[ 98.044984] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.61.43 DST=88.159.69.34 LEN=49 TOS=0x00 PREC=0x00 TTL=111 ID=23939 DF PROTO=TCP SPT=1863 DPT=53450 WINDOW=65465 RES=0x00 ACK PSH FIN URGP=0
[ 179.320705] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=47444 PROTO=2
[ 247.439663] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8630 DF PROTO=TCP SPT=53488 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.440613] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8629 DF PROTO=TCP SPT=53484 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.441498] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8628 DF PROTO=TCP SPT=53491 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.442325] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8631 DF PROTO=TCP SPT=53485 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.443146] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8632 DF PROTO=TCP SPT=53489 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.443970] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8633 DF PROTO=TCP SPT=53486 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.444868] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8634 DF PROTO=TCP SPT=53490 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.445744] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8635 DF PROTO=TCP SPT=53487 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.446615] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8636 DF PROTO=TCP SPT=53492 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 247.447461] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8637 DF PROTO=TCP SPT=53493 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 297.549901] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8952 DF PROTO=TCP SPT=53496 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 297.550749] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8953 DF PROTO=TCP SPT=53497 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 297.551571] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8954 DF PROTO=TCP SPT=53495 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 304.299962] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=47807 PROTO=2
[ 307.476783] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8955 DF PROTO=TCP SPT=53501 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 307.478051] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8956 DF PROTO=TCP SPT=53498 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 307.478881] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8957 DF PROTO=TCP SPT=53500 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 307.479711] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=8958 DF PROTO=TCP SPT=53499 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.509685] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9097 DF PROTO=TCP SPT=53502 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.510536] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9098 DF PROTO=TCP SPT=53503 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.538993] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9099 DF PROTO=TCP SPT=53510 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.539827] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9100 DF PROTO=TCP SPT=53507 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.540756] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9101 DF PROTO=TCP SPT=53506 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.541640] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9102 DF PROTO=TCP SPT=53504 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.542496] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9103 DF PROTO=TCP SPT=53511 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.543334] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9104 DF PROTO=TCP SPT=53509 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.544252] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9105 DF PROTO=TCP SPT=53508 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 367.545139] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9106 DF PROTO=TCP SPT=53505 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 427.590998] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9249 DF PROTO=TCP SPT=53513 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 427.591840] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9250 DF PROTO=TCP SPT=53515 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 427.592784] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9251 DF PROTO=TCP SPT=53512 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 427.593668] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9252 DF PROTO=TCP SPT=53514 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 429.307745] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=48161 PROTO=2
[ 464.773353] device vif1.0 entered promiscuous mode
[ 464.778223] xen_bridge: port 1(vif1.0) entering learning state
[ 465.032917] xen_bridge: port 1(vif1.0) entering disabled state
[ 465.058265] xen_bridge: port 1(vif1.0) entering learning state
[ 466.778365] device tap1.0 entered promiscuous mode
[ 466.778483] xen_bridge: port 2(tap1.0) entering learning state
[ 466.816622] xen_bridge: port 2(tap1.0) entering disabled state
[ 466.840473] device tap1.0 left promiscuous mode
[ 466.840571] xen_bridge: port 2(tap1.0) entering disabled state
[ 467.028258] xen_bridge: port 1(vif1.0) entering disabled state
[ 467.044830] xen_bridge: port 1(vif1.0) entering disabled state
[ 487.616993] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9544 DF PROTO=TCP SPT=53525 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.617841] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9543 DF PROTO=TCP SPT=53518 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.618662] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9542 DF PROTO=TCP SPT=53523 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.619482] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9545 DF PROTO=TCP SPT=53519 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.620408] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9546 DF PROTO=TCP SPT=53521 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.621238] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9547 DF PROTO=TCP SPT=53517 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.622063] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9548 DF PROTO=TCP SPT=53524 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.622884] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9549 DF PROTO=TCP SPT=53516 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.623708] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9550 DF PROTO=TCP SPT=53522 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 487.624612] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9551 DF PROTO=TCP SPT=53520 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 511.246158] device vif2.0 entered promiscuous mode
[ 511.250614] xen_bridge: port 1(vif2.0) entering learning state
[ 511.448258] xen_bridge: port 1(vif2.0) entering disabled state
[ 511.455799] xen_bridge: port 1(vif2.0) entering learning state
[ 511.540262] xen_bridge: port 1(vif2.0) entering disabled state
[ 511.560187] xen_bridge: port 1(vif2.0) entering disabled state
[ 547.633138] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9861 DF PROTO=TCP SPT=53527 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 547.633985] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9862 DF PROTO=TCP SPT=53528 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 547.664210] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9863 DF PROTO=TCP SPT=53529 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 547.665050] FW: INVALID IP PACKET: IN=eth1 OUT=eth0 SRC=172.16.1.220 DST=62.75.244.178 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=9864 DF PROTO=TCP SPT=53530 DPT=993 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 554.314570] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=48515 PROTO=2
[-- Attachment #3: lspci.txt --]
[-- Type: text/plain, Size: 64892 bytes --]
00:00.0 Class 0600: Device 1002:5a11 (rev 02)
Subsystem: Device 1002:5a11
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
Address: 00000000 Data: 0000
00:00.2 Class 0806: Device 1002:5a23
Subsystem: Device 1002:5a23
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4128
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
00:02.0 Class 0604: Device 1002:5a16
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 91.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 41d8
Capabilities: [b0] Subsystem: Device 1002:5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:05.0 Class 0604: Device 1002:5a19
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4121
Capabilities: [b0] Subsystem: Device 1002:5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:06.0 Class 0604: Device 1002:5a1a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 6, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4129
Capabilities: [b0] Subsystem: Device 1002:5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0a.0 Class 0604: Device 1002:5a1d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4131
Capabilities: [b0] Subsystem: Device 1002:5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0b.0 Class 0604: Device 1002:5a1f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe300000-fe5fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 31.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4139
Capabilities: [b0] Subsystem: Device 1002:5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0d.0 Class 0604: Device 1002:5a1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe200000-fe2fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4141
Capabilities: [b0] Subsystem: Device 1002:5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [190] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1491
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 5000 [size=4]
Region 2: I/O ports at 3000 [size=8]
Region 3: I/O ports at 2000 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at fe0ff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0100c Data: 4199
Capabilities: [70] SATA HBA <?>
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:12.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe0fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 1462:7640
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe0ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:13.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe0fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 1462:7640
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe0ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:14.0 Class 0c05: Device 1002:4385 (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: i2c-piix4
00:14.3 Class 0601: Device 1002:439d (rev 40)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Class 0c03: Device 1002:4399 (prog-if 10)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe0fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 Class 0604: Device 1002:43a0
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 20, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee3f00c Data: 4149
Capabilities: [b0] Subsystem: Device 1002:0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe0fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 1462:7640
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe0ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:18.0 Class 0600: Device 1022:1200
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Class 0600: Device 1022:1201
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Class 0600: Device 1022:1202
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod
00:18.3 Class 0600: Device 1022:1203
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
00:18.4 Class 0600: Device 1022:1204
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
03:06.0 Class 0401: Device 13f6:0111 (rev 10)
Subsystem: Device 13f6:0111
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 9800 [disabled] [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
Kernel modules: snd-cmipci
04:00.0 Class 0c03: Device 1033:0194 (rev 03) (prog-if 30)
Subsystem: Device 1462:4257
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 40
Region 0: Memory at fe200000 (64-bit, non-prefetchable) [disabled] [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable- Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] #18
Kernel driver in use: pciback
05:00.0 Class 0604: Device 10b5:8613 (rev ba)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe3e0000 (32-bit, non-prefetchable) [size=128K]
Bus: primary=05, secondary=06, subordinate=08, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe400000-fe5fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable+ Count=1/4 Maskable+ 64bit+
Address: 00000000fee3f00c Data: 4151
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Upstream Port, MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-SlotPowerLimit 31.000000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a4] Subsystem: Device 10b5:8613
Capabilities: [100] Device Serial Number ba-86-01-10-b5-df-0e-00
Capabilities: [fb4] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [138] Power Budgeting <?>
Capabilities: [148] Virtual Channel <?>
Capabilities: [448] Vendor Specific Information <?>
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
06:01.0 Class 0604: Device 10b5:8613 (rev ba)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable+ Count=1/4 Maskable+ 64bit+
Address: 00000000fee3f00c Data: 4159
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 71, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a4] Subsystem: Device 10b5:8613
Capabilities: [100] Device Serial Number ba-86-01-10-b5-df-0e-00
Capabilities: [fb4] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl+ DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
06:02.0 Class 0604: Device 10b5:8613 (rev ba)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable+ Count=1/4 Maskable+ 64bit+
Address: 00000000fee3f00c Data: 4161
Masking: 00000001 Pending: 00000000
Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <2us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 72, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a4] Subsystem: Device 10b5:8613
Capabilities: [100] Device Serial Number ba-86-01-10-b5-df-0e-00
Capabilities: [fb4] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [148] Virtual Channel <?>
Capabilities: [520] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl+ DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [950] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:00.0 Class 0106: Device 1b4b:9123 (rev 10) (prog-if 01)
Subsystem: Device 1043:8400
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1490
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at fe4ff800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fe4e0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 41a1
Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: ahci
08:00.0 Class 0c03: Device 1033:0194 (rev 03) (prog-if 30)
Subsystem: Device 1043:8413
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [disabled] [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable- Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] #18
Kernel driver in use: pciback
09:00.0 Class 0604: Device 104c:8231 (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel modules: shpchp
0a:01.0 Class 0c03: Device 1033:0035 (rev 43) (prog-if 10)
Subsystem: Device 1033:0035
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe600000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
0a:01.1 Class 0c03: Device 1033:0035 (rev 43) (prog-if 10)
Subsystem: Device 1033:0035
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 45
Region 0: Memory at fe601000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
0a:01.2 Class 0c03: Device 1033:00e0 (rev 04) (prog-if 20)
Subsystem: Device 1838:1074
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 46
Region 0: Memory at fe602000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
0b:00.0 Class 0200: Device 10ec:8168 (rev 03)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1488
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at cfeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfef8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fe7e0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41c9
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
0c:00.0 Class 0200: Device 10ec:8168 (rev 03)
Subsystem: Device 1462:7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1489
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at cffff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41b9
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 04-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
0d:00.0 Class 0300: Device 1002:95c5
Subsystem: Device 1043:01d4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
0d:00.1 Class 0403: Device 1002:aa28
Subsystem: Device 1043:aa28
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
[-- Attachment #4: lspci-tree.txt --]
[-- Type: text/plain, Size: 813 bytes --]
-[0000:00]-+-00.0
+-00.2
+-02.0-[0d]--+-00.0
| \-00.1
+-05.0-[0c]----00.0
+-06.0-[0b]----00.0
+-0a.0-[09-0a]----00.0-[0a]--+-01.0
| +-01.1
| \-01.2
+-0b.0-[05-08]----00.0-[06-08]--+-01.0-[08]----00.0
| \-02.0-[07]----00.0
+-0d.0-[04]----00.0
+-11.0
+-12.0
+-12.2
+-13.0
+-13.2
+-14.0
+-14.3
+-14.4-[03]----06.0
+-14.5
+-15.0-[02]--
+-16.0
+-16.2
+-18.0
+-18.1
+-18.2
+-18.3
\-18.4
[-- Attachment #5: xm-dmesg.txt --]
[-- Type: text/plain, Size: 28097 bytes --]
__ __ _ _ _ _ _ _
\ \/ /___ _ __ | || | / | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ \047_ \ | || |_ | |__| | | | \047_ \/ __| __/ _` | \047_ \| |/ _ \
/ \ __/ | | | |__ _|| |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.1-unstable (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Sun Aug 8 21:48:56 CEST 2010
(XEN) Latest ChangeSet: Wed Aug 04 19:24:17 2010 +0100 21925:8992134dcfd0
(XEN) Console output is synchronous.
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: dom0_mem=768M loglvl=all loglvl_guest=all com1=115200,8n1 sync_console console_to_ring console=com1,vga iommu=verbose,amd-iommu-debug
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ac00 (usable)
(XEN) 000000000009ac00 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000c7e90000 (usable)
(XEN) 00000000c7e90000 - 00000000c7e9e000 (ACPI data)
(XEN) 00000000c7e9e000 - 00000000c7ee0000 (ACPI NVS)
(XEN) 00000000c7ee0000 - 00000000c7f00000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000238000000 (usable)
(XEN) ACPI: RSDP 000FB120, 0014 (r0 ACPIAM)
(XEN) ACPI: RSDT C7E90000, 0048 (r1 MSI OEMSLIC 20100622 MSFT 97)
(XEN) ACPI: FACP C7E90200, 0084 (r1 7640MS A7640100 20100622 MSFT 97)
(XEN) ACPI: DSDT C7E905E0, 9449 (r1 A7640 A7640100 100 INTL 20051117)
(XEN) ACPI: FACS C7E9E000, 0040
(XEN) ACPI: APIC C7E90390, 0088 (r1 7640MS A7640100 20100622 MSFT 97)
(XEN) ACPI: MCFG C7E90420, 003C (r1 7640MS OEMMCFG 20100622 MSFT 97)
(XEN) ACPI: SLIC C7E90460, 0176 (r1 MSI OEMSLIC 20100622 MSFT 97)
(XEN) ACPI: OEMB C7E9E040, 0072 (r1 7640MS A7640100 20100622 MSFT 97)
(XEN) ACPI: SRAT C7E9A5E0, 0108 (r3 AMD FAM_F_10 2 AMD 1)
(XEN) ACPI: HPET C7E9A6F0, 0038 (r1 7640MS OEMHPET 20100622 MSFT 97)
(XEN) ACPI: IVRS C7E9A730, 0100 (r1 AMD RD890S 202031 AMD 0)
(XEN) ACPI: SSDT C7E9A830, 0DA4 (r1 A M I POWERNOW 1 AMD 1)
(XEN) System RAM: 8190MB (8386728kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-c8000000
(XEN) SRAT: Node 0 PXM 0 100000000-238000000
(XEN) NUMA: Allocated memnodemap from 237ef7000 - 237efa000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[c7e9e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 0:10 APIC version 16
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3200.202 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AMD-Vi: Found MSI capability block
(XEN) AMD-Vi: ACPI Table:
(XEN) AMD-Vi: Signature IVRS
(XEN) AMD-Vi: Length 0x100
(XEN) AMD-Vi: Revision 0x1
(XEN) AMD-Vi: CheckSum 0x4f
(XEN) AMD-Vi: OEM_Id AMD
(XEN) AMD-Vi: OEM_Table_Id RD890S
(XEN) AMD-Vi: OEM_Revision 0x202031
(XEN) AMD-Vi: Creator_Id AMD
(XEN) AMD-Vi: Creator_Revision 0x0
(XEN) AMD-Vi: IVRS Block:
(XEN) AMD-Vi: Type 0x10
(XEN) AMD-Vi: Flags 0x3e
(XEN) AMD-Vi: Length 0xd0
(XEN) AMD-Vi: Dev_Id 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x0
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x0 -> 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x10
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0xd00
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0xd00 -> 0xd01
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x28
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xc00
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x30
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xb00
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x50
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x900
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x0
(XEN) AMD-Vi: Dev_Id 0x0
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x43
(XEN) AMD-Vi: Dev_Id 0xa08
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0xa08 -> 0xaff
(XEN) AMD-Vi: Dev_Id Alias: 0xa00
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x58
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x500
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x608
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x800
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x610
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x700
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Error: Invalid Range: Last Dev_Id 0x700
(XEN) AMD-Vi: Add device table entry at DTE:0x0, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x1, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x2, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x10, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x28, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x30, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x50, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x58, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x500, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x608, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x610, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x800, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0x900, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0xa00, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0xb00, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0xc00, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0xd00, intremap_table:237ee0000
(XEN) AMD-Vi: Add device table entry at DTE:0xd01, intremap_table:237ee0000
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 6 CPUs
(XEN) tmem: initialized comp=0 dedup=0 tze=0 global-lock=0
(XEN) HPET\047s MSI mode hasn\047t been supported when Interrupt Remapping is enabled.
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff*** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x677000
(XEN) elf_parse_binary: phdr: paddr=0x1677000 memsz=0x10fc94
(XEN) elf_parse_binary: phdr: paddr=0x1787000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1788000 memsz=0x14b98
(XEN) elf_parse_binary: phdr: paddr=0x179d000 memsz=0x9b0000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x214d000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff8179d200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff8214d000
(XEN) virt_entry = 0xffffffff8179d200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x214d000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000220000000->0000000230000000 (131072 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff8214d000
(XEN) Init. ramdisk: ffffffff8214d000->ffffffff8d4e0400
(XEN) Phys-Mach map: ffffffff8d4e1000->ffffffff8d661000
(XEN) Start info: ffffffff8d661000->ffffffff8d6614b4
(XEN) Page tables: ffffffff8d662000->ffffffff8d6d1000
(XEN) Boot stack: ffffffff8d6d1000->ffffffff8d6d2000
(XEN) TOTAL: ffffffff80000000->ffffffff8d800000
(XEN) ENTRY ADDRESS: ffffffff8179d200
(XEN) Dom0 has maximum 6 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81677000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81677000 -> 0xffffffff81786c94
(XEN) elf_load_binary: phdr 2 at 0xffffffff81787000 -> 0xffffffff81787888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81788000 -> 0xffffffff8179cb98
(XEN) elf_load_binary: phdr 4 at 0xffffffff8179d000 -> 0xffffffff8180e000
(XEN) AMD-Vi: Setup I/O page table at DTE:0x0, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x2, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x10, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x28, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x30, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x50, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x58, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Fail to find iommu for device00:0d.0
(XEN) AMD-Vi: Fail to find iommu for device00:11.0
(XEN) AMD-Vi: Fail to find iommu for device00:12.0
(XEN) AMD-Vi: Fail to find iommu for device00:12.2
(XEN) AMD-Vi: Fail to find iommu for device00:13.0
(XEN) AMD-Vi: Fail to find iommu for device00:13.2
(XEN) AMD-Vi: Fail to find iommu for device00:14.0
(XEN) AMD-Vi: Fail to find iommu for device00:14.3
(XEN) AMD-Vi: Fail to find iommu for device00:14.4
(XEN) AMD-Vi: Fail to find iommu for device00:14.5
(XEN) AMD-Vi: Fail to find iommu for device00:15.0
(XEN) AMD-Vi: Fail to find iommu for device00:16.0
(XEN) AMD-Vi: Fail to find iommu for device00:16.2
(XEN) AMD-Vi: Fail to find iommu for device00:18.0
(XEN) AMD-Vi: Fail to find iommu for device00:18.1
(XEN) AMD-Vi: Fail to find iommu for device00:18.2
(XEN) AMD-Vi: Fail to find iommu for device00:18.3
(XEN) AMD-Vi: Fail to find iommu for device00:18.4
(XEN) AMD-Vi: Fail to find iommu for device03:06.0
(XEN) AMD-Vi: Fail to find iommu for device04:00.0
(XEN) AMD-Vi: Setup I/O page table at DTE:0x500, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x608, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x610, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Fail to find iommu for device07:00.0
(XEN) AMD-Vi: Setup I/O page table at DTE:0x800, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0x900, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0xa00, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0xb00, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0xc00, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0xd00, root_table:232074000,domain_id:0, paging_mode:3
(XEN) AMD-Vi: Setup I/O page table at DTE:0xd01, root_table:232074000,domain_id:0, paging_mode:3
(XEN) Scrubbing Free RAM: .........................................................................done.
(XEN) trace.c:90:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch input to Xen)
(XEN) Freed 184kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.17+xen-next-2.6.32.x-20100807 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sat Aug 7 17:49:00 CEST 2010
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro earlyprintk=xen max_loop=255 loop_max_part=63 xen-pciback.hide=(03:06.0)(04:00.0)(08:00.0)(0a:01.0)(0a:01.1)(0a:01.2) pci=resource_alignment=03:06.0;04:00.0;08:00.0;0a:01.0;0a:01.1;0a:01.2;
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] Xen: 000000000009ac00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 00000000c7e90000 - 00000000c7e9e000 (ACPI data)
[ 0.000000] Xen: 00000000c7e9e000 - 00000000c7ee0000 (ACPI NVS)
[ 0.000000] Xen: 00000000c7ee0000 - 00000000c7f00000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] RAMDISK: 0214d000 - 0d4e0400
[ 0.000000] ACPI: RSDP 00000000000fb120 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7e90000 00048 (v01 MSI OEMSLIC 20100622 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7e90200 00084 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7e905e0 09449 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7e9e000 00040
[ 0.000000] ACPI: APIC 00000000c7e90390 00088 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7e90420 0003C (v01 7640MS OEMMCFG 20100622 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000c7e90460 00176 (v01 MSI OEMSLIC 20100622 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7e9e040 00072 (v01 7640MS A7640100 20100622 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7e9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7e9a6f0 00038 (v01 7640MS OEMHPET 20100622 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000c7e9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 00000000c7e9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000d662000 - 000d6d1000] XEN PAGETABLES ==> [000d662000 - 000d6d1000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 000212cbe8] TEXT DATA BSS ==> [0001000000 - 000212cbe8]
[ 0.000000] #4 [000214d000 - 000d4e0400] RAMDISK ==> [000214d000 - 000d4e0400]
[ 0.000000] #5 [000d4e1000 - 000d662000] XEN START INFO ==> [000d4e1000 - 000d662000]
[ 0.000000] #6 [000212d000 - 000212d10b] BRK ==> [000212d000 - 000212d10b]
[ 0.000000] #7 [0000100000 - 0000210000] PGTABLE ==> [0000100000 - 0000210000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 0, address 0xfec20000, GSI 24-24
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:97e90000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88000d6e8000 s84888 r8192 d21608 u114688
[ 0.000000] pcpu-alloc: s84888 r8192 d21608 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 191991
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro earlyprintk=xen max_loop=255 loop_max_part=63 xen-pciback.hide=(03:06.0)(04:00.0)(08:00.0)(0a:01.0)(0a:01.1)(0a:01.2) pci=resource_alignment=03:06.0;04:00.0;08:00.0;0a:01.0;0a:01.1;0a:01.2;
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff88000eb5d000 - ffff880012b5d000
[ 0.000000] DMA: software IO TLB at phys 0xeb5d000 - 0x12b5d000
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000eb5d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880012bbd000 size=32768
[ 0.000000] Memory: 495460k/786432k available (4559k kernel code, 472k absent, 289788k reserved, 3147k data, 496k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
(XEN) traps.c:2301:d0 Domain attempted WRMSR 00000000c0010004 from 0x0000eff03ffb1f5e to 0x0000000000000000.
(XEN) traps.c:2301:d0 Domain attempted WRMSR 00000000c0010000 from 0x00000204c61b58ef to 0x0000000000430076.
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:00.2
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:05.0
(XEN) PCI add device 00:06.0
(XEN) PCI add device 00:0a.0
(XEN) PCI add device 00:0b.0
(XEN) PCI add device 00:0d.0
(XEN) PCI add device 00:11.0
(XEN) PCI add device 00:12.0
(XEN) PCI add device 00:12.2
(XEN) PCI add device 00:13.0
(XEN) PCI add device 00:13.2
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:14.3
(XEN) PCI add device 00:14.4
(XEN) PCI add device 00:14.5
(XEN) PCI add device 00:15.0
(XEN) PCI add device 00:16.0
(XEN) PCI add device 00:16.2
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 0d:00.0
(XEN) PCI add device 0d:00.1
(XEN) PCI add device 0c:00.0
(XEN) PCI add device 0b:00.0
(XEN) PCI add device 09:00.0
(XEN) PCI add device 0a:01.0
(XEN) PCI add device 0a:01.1
(XEN) PCI add device 0a:01.2
(XEN) PCI add device 05:00.0
(XEN) PCI add device 06:01.0
(XEN) PCI add device 06:02.0
(XEN) PCI add device 08:00.0
(XEN) PCI add device 07:00.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 03:06.0
(XEN) AMD-Vi: Fail to find iommu for MSI device id = 0x68
(XEN) AMD-Vi: Fail to find iommu for MSI device id = 0xa8
(XEN) AMD-Vi: Fail to find iommu for MSI device id = 0x88
(XEN) AMD-Vi: Fail to find iommu for MSI device id = 0x88
(XEN) AMD-Vi: Fail to find iommu for MSI device id = 0x700
(XEN) AMD-Vi: Fail to find iommu for MSI device id = 0x700
(XEN) mm.c:2370:d0 Bad type (saw 7400000000000001 != exp 1000000000000000) for mfn 215e73 (pfn 23f1b)
(XEN) mm.c:2946:d0 Error while pinning mfn 215e73
(XEN) mm.c:2370:d0 Bad type (saw 7400000000000001 != exp 1000000000000000) for mfn 215e73 (pfn 23f1b)
(XEN) mm.c:891:d0 Attempt to create linear p.t. with write perms
(XEN) mm.c:1336:d0 Failure in alloc_l2_table: entry 290
(XEN) mm.c:2123:d0 Error while validating mfn 216405 (pfn 24589) for type 2000000000000000: caf=8000000000000003 taf=2000000000000001
(XEN) mm.c:933:d0 Attempt to create linear p.t. with write perms
(XEN) mm.c:1446:d0 Failure in alloc_l3_table: entry 509
(XEN) mm.c:2123:d0 Error while validating mfn 230f49 (pfn 2ee45) for type 3000000000000000: caf=8000000000000003 taf=3000000000000001
(XEN) mm.c:958:d0 Attempt to create linear p.t. with write perms
(XEN) mm.c:1493:d0 Failure in alloc_l4_table: entry 255
(XEN) mm.c:2123:d0 Error while validating mfn 22bbe8 (pfn bbe8) for type 4000000000000000: caf=8000000000000003 taf=4000000000000001
(XEN) mm.c:2946:d0 Error while pinning mfn 22bbe8
(XEN) mm.c:2370:d0 Bad type (saw 7400000000000001 != exp 1000000000000000) for mfn 215e73 (pfn 23f1b)
(XEN) mm.c:891:d0 Attempt to create linear p.t. with write perms
(XEN) mm.c:1336:d0 Failure in alloc_l2_table: entry 290
(XEN) mm.c:2123:d0 Error while validating mfn 216405 (pfn 24589) for type 2000000000000000: caf=8000000000000003 taf=2000000000000001
(XEN) mm.c:933:d0 Attempt to create linear p.t. with write perms
(XEN) mm.c:1446:d0 Failure in alloc_l3_table: entry 509
(XEN) mm.c:2123:d0 Error while validating mfn 230f49 (pfn 2ee45) for type 3000000000000000: caf=8000000000000003 taf=3000000000000001
(XEN) mm.c:958:d0 Attempt to create linear p.t. with write perms
(XEN) mm.c:1493:d0 Failure in alloc_l4_table: entry 255
(XEN) mm.c:2123:d0 Error while validating mfn 230ec9 (pfn 2eec5) for type 4000000000000000: caf=8000000000000003 taf=4000000000000001
(XEN) mm.c:2946:d0 Error while pinning mfn 230ec9
(XEN) mm.c:3007:d0 Mfn 22bbe8 not pinned
(XEN) mm.c:3007:d0 Mfn 230ec9 not pinned
(XEN) mm.c:3007:d0 Mfn 215e73 not pinned
^[[9;0](XEN) tmem: all pools frozen for all domains
(XEN) tmem: all pools thawed for all domains
(XEN) tmem: all pools frozen for all domains
(XEN) tmem: all pools thawed for all domains
(XEN) AMD-Vi: Fail to find iommu. 4:0.0 cannot be assigned to domain 1
(XEN) domctl.c:848:d0 XEN_DOMCTL_assign_device: assign device (4:0.0) failed
(XEN) tmem: all pools frozen for all domains
(XEN) tmem: all pools thawed for all domains
(XEN) tmem: all pools frozen for all domains
(XEN) tmem: all pools thawed for all domains
[-- Attachment #6: xm-info.txt --]
[-- Type: text/plain, Size: 1331 bytes --]
host : serveerstertje
release : 2.6.32.17+xen-next-2.6.32.x-20100807
version : #1 SMP Sat Aug 7 17:49:00 CEST 2010
machine : x86_64
nr_cpus : 6
nr_nodes : 1
cores_per_socket : 6
threads_per_core : 1
cpu_mhz : 3200
hw_caps : 178bf3ff:efd3fbff:00000000:00001310:00802001:00000000:000037ff:00000000
virt_caps : hvm hvm_directio
total_memory : 8190
free_memory : 7317
free_cpus : 0
xen_major : 4
xen_minor : 1
xen_extra : -unstable
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : Wed Aug 04 19:24:17 2010 +0100 21925:8992134dcfd0
xen_commandline : dom0_mem=768M loglvl=all loglvl_guest=all com1=115200,8n1 sync_console console_to_ring console=com1,vga iommu=verbose,amd-iommu-debug
cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
cc_compile_by : root
cc_compile_domain :
cc_compile_date : Sun Aug 8 21:48:56 CEST 2010
xend_config_format : 4
[-- Attachment #7: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: AMD iommu , pci passthrough problems assigning devices to HVM
2010-08-10 12:26 AMD iommu , pci passthrough problems assigning devices to HVM Sander Eikelenboom
@ 2010-08-10 20:51 ` Rose, Gregory V
2010-08-11 10:11 ` Wei Wang2
1 sibling, 0 replies; 4+ messages in thread
From: Rose, Gregory V @ 2010-08-10 20:51 UTC (permalink / raw)
To: Sander Eikelenboom, Huang2, Wei
Cc: Wang2, Wei, Przywara, Andre, Joerg Roedel,
xen-devel@lists.xensource.com
In your device 0b.0 I see this:
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
So it looks to me as if the device is ACS capable but that the capability is not turned on?
I think every device in the path has to be ACS capable and the capability enabled.
- Greg Rose
LAD
Intel Corp.
>-----Original Message-----
>From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-
>bounces@lists.xensource.com] On Behalf Of Sander Eikelenboom
>Sent: Tuesday, August 10, 2010 5:26 AM
>To: Huang2, Wei
>Cc: Wang2, Wei; Przywara, Andre; Joerg Roedel; xen-
>devel@lists.xensource.com
>Subject: [Xen-devel] AMD iommu , pci passthrough problems assigning
>devices to HVM
>
>Hi,
>
>I'm running a machine with:
>- Hypervisor: xen-unstable
>- Dom0: xen/next-2.6.32.17 commit
>c3f5aba942c7516a5c76c47345ff0a473daf2542
>
>Hardware:
>-MSI 890FXA-GD70 with AMD IOMMU
>-Phenom X6
>
>I'm trying to do PCI passthrough to a HVM, this fails with:
>
>Error: Failed to assign device to IOMMU
>(0000:04:00.0@100,msitranslate=1,power_mgmt=0)
>Error: pci: to avoid potential security issue, 0000:08:00.0 is not
>allowed to be assigned to guest since it is behind PCIe switch that does
>not support or enable ACS.
>
>
>I have found this thread
>https://bugzilla.redhat.com/show_bug.cgi?id=526713 regarding the ACS
>problem, which says the pci bridges need these capabilities:
> ScrValid+, ReqRedir+, CmpltRedir+, and UpstreamFwd+
>
>When i do a lspci -vvv on my system i see these capabilities, but i do
>see some disturbing debug message on boot when amd_iommu_debug is on.
>
>Attached:
>- xm info
>- xm dmesg (booted with amd_iommu_debug on)
>- dmesg
>- lspci -vvv
>
>--
>Sander
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: AMD iommu , pci passthrough problems assigning devices to HVM
2010-08-10 12:26 AMD iommu , pci passthrough problems assigning devices to HVM Sander Eikelenboom
2010-08-10 20:51 ` Rose, Gregory V
@ 2010-08-11 10:11 ` Wei Wang2
2010-08-11 11:26 ` Sander Eikelenboom
1 sibling, 1 reply; 4+ messages in thread
From: Wei Wang2 @ 2010-08-11 10:11 UTC (permalink / raw)
To: Sander Eikelenboom
Cc: Przywara, Andre, Joerg Roedel, Huang2, Wei,
xen-devel@lists.xensource.com
Hi,
In your debug output I saw:
(XEN) AMD-Vi: Fail to find iommu for device04:00.0
This means no iommu attached to 04:00.0, so it cannot be assigned to any hvm
guest. What is this device in your system? An add-on device or on board
device? It looks like BIOS failed to create an IVRS entry for this device.
Wei
On Tuesday 10 August 2010 14:26:14 Sander Eikelenboom wrote:
> Hi,
>
> I'm running a machine with:
> - Hypervisor: xen-unstable
> - Dom0: xen/next-2.6.32.17 commit c3f5aba942c7516a5c76c47345ff0a473daf2542
>
> Hardware:
> -MSI 890FXA-GD70 with AMD IOMMU
> -Phenom X6
>
> I'm trying to do PCI passthrough to a HVM, this fails with:
>
> Error: Failed to assign device to IOMMU
> (0000:04:00.0@100,msitranslate=1,power_mgmt=0) Error: pci: to avoid
> potential security issue, 0000:08:00.0 is not allowed to be assigned to
> guest since it is behind PCIe switch that does not support or enable ACS.
>
>
> I have found this thread https://bugzilla.redhat.com/show_bug.cgi?id=526713
> regarding the ACS problem, which says the pci bridges need these
> capabilities: ScrValid+, ReqRedir+, CmpltRedir+, and UpstreamFwd+
>
> When i do a lspci -vvv on my system i see these capabilities, but i do see
> some disturbing debug message on boot when amd_iommu_debug is on.
>
> Attached:
> - xm info
> - xm dmesg (booted with amd_iommu_debug on)
> - dmesg
> - lspci -vvv
>
> --
> Sander
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: AMD iommu , pci passthrough problems assigning devices to HVM
2010-08-11 10:11 ` Wei Wang2
@ 2010-08-11 11:26 ` Sander Eikelenboom
0 siblings, 0 replies; 4+ messages in thread
From: Sander Eikelenboom @ 2010-08-11 11:26 UTC (permalink / raw)
To: Wei Wang2
Cc: Przywara, Andre, Joerg Roedel, Huang2, Wei,
xen-devel@lists.xensource.com
Hello Wei,
It's an pci express usb3/xhci add-on card, there also seemed to be an alias problem with another device, see this thread on LKML, it also contains the result of amd_iommu_dump on baremetal 2.6.35 kernel.
At first the kernel didn't boot at all, though xen-unstable did load, so i guess there are a few differences in the amd iommu implementation and parsing between the linux kernel and xen.
http://lkml.indiana.edu/hypermail/linux/kernel/1008.1/00782.html
Would be nice to have some good explanation of the problem, so i could contact MSI to get the bios fixed.
--
Sander
Wednesday, August 11, 2010, 12:11:58 PM, you wrote:
> Hi,
> In your debug output I saw:
> (XEN) AMD-Vi: Fail to find iommu for device04:00.0
> This means no iommu attached to 04:00.0, so it cannot be assigned to any hvm
> guest. What is this device in your system? An add-on device or on board
> device? It looks like BIOS failed to create an IVRS entry for this device.
> Wei
> On Tuesday 10 August 2010 14:26:14 Sander Eikelenboom wrote:
>> Hi,
>>
>> I'm running a machine with:
>> - Hypervisor: xen-unstable
>> - Dom0: xen/next-2.6.32.17 commit c3f5aba942c7516a5c76c47345ff0a473daf2542
>>
>> Hardware:
>> -MSI 890FXA-GD70 with AMD IOMMU
>> -Phenom X6
>>
>> I'm trying to do PCI passthrough to a HVM, this fails with:
>>
>> Error: Failed to assign device to IOMMU
>> (0000:04:00.0@100,msitranslate=1,power_mgmt=0) Error: pci: to avoid
>> potential security issue, 0000:08:00.0 is not allowed to be assigned to
>> guest since it is behind PCIe switch that does not support or enable ACS.
>>
>>
>> I have found this thread https://bugzilla.redhat.com/show_bug.cgi?id=526713
>> regarding the ACS problem, which says the pci bridges need these
>> capabilities: ScrValid+, ReqRedir+, CmpltRedir+, and UpstreamFwd+
>>
>> When i do a lspci -vvv on my system i see these capabilities, but i do see
>> some disturbing debug message on boot when amd_iommu_debug is on.
>>
>> Attached:
>> - xm info
>> - xm dmesg (booted with amd_iommu_debug on)
>> - dmesg
>> - lspci -vvv
>>
>> --
>> Sander
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-08-11 11:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-10 12:26 AMD iommu , pci passthrough problems assigning devices to HVM Sander Eikelenboom
2010-08-10 20:51 ` Rose, Gregory V
2010-08-11 10:11 ` Wei Wang2
2010-08-11 11:26 ` Sander Eikelenboom
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.