[00/67] 2.6.35.2 stable review

[00/67] 2.6.35.2 stable review

[Greg KH]

This is the start of the stable review cycle for the 2.6.35.2 release.
There are 67 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let us know.  If anyone is a maintainer of the proper subsystem, and
wants to add a Signed-off-by: line to the patch, please respond with it.

Responses should be made by Friday, August 13, 2010, 20:00:00 UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.35.2-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

 Makefile                                    |    2 +-
 arch/arm/Kconfig                            |   12 ++++
 arch/arm/include/asm/tlbflush.h             |    8 +++
 arch/arm/mach-pxa/cm-x300.c                 |    3 +-
 arch/arm/plat-mxc/include/mach/gpio.h       |    1 +
 arch/powerpc/Makefile                       |   16 ++++-
 arch/powerpc/kernel/perf_event_fsl_emb.c    |    1 +
 arch/x86/include/asm/cmpxchg_32.h           |   68 ++++++++++----------
 arch/x86/include/asm/cmpxchg_64.h           |   40 ++++++------
 arch/x86/kernel/cpu/mtrr/main.c             |   56 +++++++++++++----
 arch/x86/kernel/cpu/vmware.c                |    9 +++-
 arch/x86/kernel/smpboot.c                   |    7 ++
 arch/x86/mm/kmmio.c                         |   16 ++++-
 arch/x86/mm/testmmiotrace.c                 |   22 +++++++
 arch/x86/pci/acpi.c                         |    9 +++
 crypto/Kconfig                              |    8 +++
 crypto/algboss.c                            |    4 +
 crypto/testmgr.c                            |   14 ++++
 drivers/ata/ata_piix.c                      |    8 +++
 drivers/atm/solos-pci.c                     |    7 ++-
 drivers/block/drbd/drbd_main.c              |   27 ++++++---
 drivers/bluetooth/btusb.c                   |    3 +
 drivers/char/ipmi/ipmi_si_intf.c            |    8 +++
 drivers/char/nozomi.c                       |    4 +-
 drivers/dma/ioat/dma.h                      |    1 +
 drivers/dma/ioat/dma_v2.c                   |   24 +++++++-
 drivers/dma/ioat/dma_v3.c                   |    5 +-
 drivers/ide/ide-cd.c                        |   14 +++-
 drivers/md/md.c                             |   37 ++++++-----
 drivers/md/md.h                             |    4 +
 drivers/md/raid10.c                         |   18 +++++
 drivers/mtd/nand/mxc_nand.c                 |    2 +-
 drivers/mtd/nand/plat_nand.c                |    2 +-
 drivers/net/e100.c                          |    2 +
 drivers/net/e1000/e1000_main.c              |    3 +
 drivers/net/e1000e/netdev.c                 |    4 +
 drivers/net/igb/igb_main.c                  |    2 +
 drivers/net/igbvf/netdev.c                  |    2 +
 drivers/net/ixgb/ixgb_main.c                |    2 +
 drivers/net/ixgbe/ixgbe_main.c              |    1 +
 drivers/net/ixgbevf/ixgbevf_main.c          |    2 +
 drivers/net/smsc911x.c                      |   92 +++++++++++++++------------
 drivers/net/wireless/iwlwifi/iwl-devtrace.h |    2 +-
 drivers/net/wireless/rtl818x/rtl8180_dev.c  |    2 +
 drivers/pci/intel-iommu.c                   |   28 ++++++++
 drivers/pci/quirks.c                        |    4 +
 drivers/pcmcia/pcmcia_resource.c            |    5 +-
 drivers/serial/8250_pci.c                   |   13 ++++
 drivers/staging/hv/Kconfig                  |    2 +-
 drivers/staging/line6/Kconfig               |    1 +
 drivers/staging/panel/panel.c               |    2 +
 drivers/staging/rt2860/usb_main_dev.c       |    1 +
 drivers/usb/core/hub.c                      |    6 ++-
 drivers/usb/core/quirks.c                   |    3 +
 drivers/usb/core/urb.c                      |   50 ++++++---------
 drivers/usb/host/ehci-pci.c                 |    1 +
 drivers/usb/host/ehci-sched.c               |   10 +--
 drivers/usb/host/ehci.h                     |    1 +
 drivers/usb/misc/usbtest.c                  |    6 ++-
 drivers/usb/mon/mon_bin.c                   |    2 +-
 drivers/usb/musb/musb_debugfs.c             |   32 +++++-----
 drivers/usb/serial/cp210x.c                 |    4 +
 drivers/usb/serial/ftdi_sio.c               |    4 +
 drivers/usb/serial/ftdi_sio_ids.h           |   10 +++
 drivers/usb/serial/generic.c                |   15 +++--
 drivers/usb/serial/option.c                 |   13 ++++
 drivers/video/w100fb.c                      |    4 +-
 drivers/xen/events.c                        |    1 +
 fs/block_dev.c                              |   10 ++-
 fs/ecryptfs/file.c                          |   60 +++++++++++-------
 fs/ecryptfs/inode.c                         |    5 +-
 fs/ext4/super.c                             |    4 +-
 fs/jfs/xattr.c                              |   87 +++++++++++--------------
 fs/namespace.c                              |    2 +-
 fs/signalfd.c                               |    2 +
 fs/super.c                                  |    6 ++
 include/linux/Kbuild                        |    1 +
 include/linux/fs.h                          |    7 +-
 include/linux/interrupt.h                   |    7 ++-
 include/linux/notifier.h                    |    2 +-
 include/linux/sched.h                       |    6 --
 include/linux/usb/quirks.h                  |    4 +
 kernel/irq/manage.c                         |    2 +-
 kernel/sched.c                              |   10 ---
 kernel/time/tick-sched.c                    |    2 +-
 mm/swapfile.c                               |    6 +-
 sound/pci/hda/patch_realtek.c               |    1 +
 87 files changed, 695 insertions(+), 321 deletions(-)

[01/67] x86, vmware: Preset lpj values when on VMware.

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Alok Kataria <akataria@vmware.com>

commit 9f242dc10e0c3c1eb32d8c83c18650a35fd7f80d upstream.

When running on VMware's platform, we have seen situations where
the AP's try to calibrate the lpj values and fail to get good calibration
runs becasue of timing issues. As a result delays don't work correctly
on all cpus.

The solutions is to set preset_lpj value based on the current tsc frequency
value. This is similar to what KVM does as well.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <1280790637.14933.29.camel@ank32.eng.vmware.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/cpu/vmware.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -51,7 +51,7 @@ static inline int __vmware_platform(void
 
 static unsigned long vmware_get_tsc_khz(void)
 {
-	uint64_t tsc_hz;
+	uint64_t tsc_hz, lpj;
 	uint32_t eax, ebx, ecx, edx;
 
 	VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
@@ -62,6 +62,13 @@ static unsigned long vmware_get_tsc_khz(
 	printk(KERN_INFO "TSC freq read from hypervisor : %lu.%03lu MHz\n",
 			 (unsigned long) tsc_hz / 1000,
 			 (unsigned long) tsc_hz % 1000);
+
+	if (!preset_lpj) {
+		lpj = ((u64)tsc_hz * 1000);
+		do_div(lpj, HZ);
+		preset_lpj = lpj;
+	}
+
 	return tsc_hz;
 }
 

[02/67] ata_piix: fix locking around SIDPR access

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 213373cf974fe69e78ec894b07f45ae2f5a3a078 upstream.

SIDPR window registers are shared across ports and as each access is
done in two steps, accesses to different ports under EH may race.
This primarily is caused by incorrect host locking in EH context and
should be fixed by defining locking requirements for each EH operation
which can be used during EH and enforcing them but for now work around
the problem by adding a dedicated SIDPR lock and grabbing it for each
SIDPR access.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mark Knecht <markknecht@gmail.com>
Reported-by: Paul Check <paul@thechecks.ca>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/ata/ata_piix.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -158,6 +158,7 @@ struct piix_map_db {
 struct piix_host_priv {
 	const int *map;
 	u32 saved_iocfg;
+	spinlock_t sidpr_lock;	/* FIXME: remove once locking in EH is fixed */
 	void __iomem *sidpr;
 };
 
@@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct at
 			       unsigned int reg, u32 *val)
 {
 	struct piix_host_priv *hpriv = link->ap->host->private_data;
+	unsigned long flags;
 
 	if (reg >= ARRAY_SIZE(piix_sidx_map))
 		return -EINVAL;
 
+	spin_lock_irqsave(&hpriv->sidpr_lock, flags);
 	piix_sidpr_sel(link, reg);
 	*val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
+	spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
 	return 0;
 }
 
@@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct a
 				unsigned int reg, u32 val)
 {
 	struct piix_host_priv *hpriv = link->ap->host->private_data;
+	unsigned long flags;
 
 	if (reg >= ARRAY_SIZE(piix_sidx_map))
 		return -EINVAL;
 
+	spin_lock_irqsave(&hpriv->sidpr_lock, flags);
 	piix_sidpr_sel(link, reg);
 	iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
+	spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
 	return 0;
 }
 
@@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struc
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
+	spin_lock_init(&hpriv->sidpr_lock);
 
 	/* Save IOCFG, this will be used for cable detection, quirk
 	 * detection and restoration on detach.  This is necessary

[03/67] perf, powerpc: fsl_emb: Restore setting perf_sample_data.period

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Scott Wood <scottwood@freescale.com>

commit 69e77a8b0426ded5d924eea7dbe4eca51e09f530 upstream.

Commit 6b95ed345b9faa4ab3598a82991968f2e9f851bb changed from
a struct initializer to perf_sample_data_init(), but the setting
of the .period member was left out.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/powerpc/kernel/perf_event_fsl_emb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/powerpc/kernel/perf_event_fsl_emb.c
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -569,6 +569,7 @@ static void record_and_restart(struct pe
 		struct perf_sample_data data;
 
 		perf_sample_data_init(&data, 0);
+		data.period = event->hw.last_period;
 
 		if (perf_event_overflow(event, nmi, &data, regs)) {
 			/*

[04/67] powerpc: fix build with make 3.82

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Sam Ravnborg <sam@ravnborg.org>

commit e32e78c5ee8aadef020fbaecbe6fb741ed9029fd upstream.

Thomas Backlund reported that the powerpc build broke with make 3.82.
It failed with the following message:

    arch/powerpc/Makefile:183: *** mixed implicit and normal rules.  Stop.

The fix is to avoid mixing non-wildcard and wildcard targets.

Reported-by: Thomas Backlund <tmb@mandriva.org>
Tested-by: Thomas Backlund <tmb@mandriva.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/powerpc/Makefile |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -163,9 +163,11 @@ drivers-$(CONFIG_OPROFILE)	+= arch/power
 # Default to zImage, override when needed
 all: zImage
 
-BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
+# With make 3.82 we cannot mix normal and wildcard targets
+BOOT_TARGETS1 := zImage zImage.initrd uImaged
+BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
 
-PHONY += $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
 
 boot := arch/$(ARCH)/boot
 
@@ -180,10 +182,16 @@ relocs_check: arch/powerpc/relocs_check.
 zImage: relocs_check
 endif
 
-$(BOOT_TARGETS): vmlinux
+$(BOOT_TARGETS1): vmlinux
+	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+$(BOOT_TARGETS2): vmlinux
+	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+
+
+bootwrapper_install:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
-bootwrapper_install %.dtb:
+%.dtb:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp

[05/67] x86, kmmio/mmiotrace: Fix double free of kmmio_fault_pages

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

commit 8b8f79b927b6b302bb65fb8c56e7a19be5fbdbef upstream.

After every iounmap mmiotrace has to free kmmio_fault_pages, but
it can't do it directly, so it defers freeing by RCU.

It usually works, but when mmiotraced code calls ioremap-iounmap
multiple times without sleeping between (so RCU won't kick in
and start freeing) it can be given the same virtual address, so
at every iounmap mmiotrace will schedule the same pages for
release. Obviously it will explode on second free.

Fix it by marking kmmio_fault_pages which are scheduled for
release and not adding them second time.

Signed-off-by: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Tested-by: Marcin Kocielnicki <koriakin-mP9o5jsk0RY@public.gmane.org>
Tested-by: Shinpei KATO <shinpei-a3aLqY3FAeqkRP3n4FtbsiGn5s73+xxf@public.gmane.org>
Acked-by: Pekka Paalanen <pq-X3B1VOXEql0@public.gmane.org>
Cc: Stuart Bennett <stuart-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org>
Cc: Marcin Kocielnicki <koriakin-mP9o5jsk0RY@public.gmane.org>
Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
LKML-Reference: <20100613215654.GA3829-OI9uyE9O0yo@public.gmane.org>
Signed-off-by: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org>
Signed-off-by: Greg Kroah-Hartman <gregkh-l3A5Bk7waGM@public.gmane.org>

---
 arch/x86/mm/kmmio.c         |   16 +++++++++++++---
 arch/x86/mm/testmmiotrace.c |   22 ++++++++++++++++++++++
 2 files changed, 35 insertions(+), 3 deletions(-)

--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -45,6 +45,8 @@ struct kmmio_fault_page {
 	 * Protected by kmmio_lock, when linked into kmmio_page_table.
 	 */
 	int count;
+
+	bool scheduled_for_release;
 };
 
 struct kmmio_delayed_release {
@@ -398,8 +400,11 @@ static void release_kmmio_fault_page(uns
 	BUG_ON(f->count < 0);
 	if (!f->count) {
 		disarm_kmmio_fault_page(f);
-		f->release_next = *release_list;
-		*release_list = f;
+		if (!f->scheduled_for_release) {
+			f->release_next = *release_list;
+			*release_list = f;
+			f->scheduled_for_release = true;
+		}
 	}
 }
 
@@ -471,8 +476,10 @@ static void remove_kmmio_fault_pages(str
 			prevp = &f->release_next;
 		} else {
 			*prevp = f->release_next;
+			f->release_next = NULL;
+			f->scheduled_for_release = false;
 		}
-		f = f->release_next;
+		f = *prevp;
 	}
 	spin_unlock_irqrestore(&kmmio_lock, flags);
 
@@ -510,6 +517,9 @@ void unregister_kmmio_probe(struct kmmio
 	kmmio_count--;
 	spin_unlock_irqrestore(&kmmio_lock, flags);
 
+	if (!release_list)
+		return;
+
 	drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
 	if (!drelease) {
 		pr_crit("leaking kmmio_fault_page objects.\n");
--- a/arch/x86/mm/testmmiotrace.c
+++ b/arch/x86/mm/testmmiotrace.c
@@ -90,6 +90,27 @@ static void do_test(unsigned long size)
 	iounmap(p);
 }
 
+/*
+ * Tests how mmiotrace behaves in face of multiple ioremap / iounmaps in
+ * a short time. We had a bug in deferred freeing procedure which tried
+ * to free this region multiple times (ioremap can reuse the same address
+ * for many mappings).
+ */
+static void do_test_bulk_ioremapping(void)
+{
+	void __iomem *p;
+	int i;
+
+	for (i = 0; i < 10; ++i) {
+		p = ioremap_nocache(mmio_address, PAGE_SIZE);
+		if (p)
+			iounmap(p);
+	}
+
+	/* Force freeing. If it will crash we will know why. */
+	synchronize_rcu();
+}
+
 static int __init init(void)
 {
 	unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
@@ -104,6 +125,7 @@ static int __init init(void)
 		   "and writing 16 kB of rubbish in there.\n",
 		   size >> 10, mmio_address);
 	do_test(size);
+	do_test_bulk_ioremapping();
 	pr_info("All done.\n");
 	return 0;
 }

[05/67] x86, kmmio/mmiotrace: Fix double free of kmmio_fault_pages

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Marcin Slusarz <marcin.slusarz@gmail.com>

commit 8b8f79b927b6b302bb65fb8c56e7a19be5fbdbef upstream.

After every iounmap mmiotrace has to free kmmio_fault_pages, but
it can't do it directly, so it defers freeing by RCU.

It usually works, but when mmiotraced code calls ioremap-iounmap
multiple times without sleeping between (so RCU won't kick in
and start freeing) it can be given the same virtual address, so
at every iounmap mmiotrace will schedule the same pages for
release. Obviously it will explode on second free.

Fix it by marking kmmio_fault_pages which are scheduled for
release and not adding them second time.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Marcin Kocielnicki <koriakin@0x04.net>
Tested-by: Shinpei KATO <shinpei@il.is.s.u-tokyo.ac.jp>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Stuart Bennett <stuart@freedesktop.org>
Cc: Marcin Kocielnicki <koriakin@0x04.net>
Cc: nouveau@lists.freedesktop.org
LKML-Reference: <20100613215654.GA3829@joi.lan>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/mm/kmmio.c         |   16 +++++++++++++---
 arch/x86/mm/testmmiotrace.c |   22 ++++++++++++++++++++++
 2 files changed, 35 insertions(+), 3 deletions(-)

--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -45,6 +45,8 @@ struct kmmio_fault_page {
 	 * Protected by kmmio_lock, when linked into kmmio_page_table.
 	 */
 	int count;
+
+	bool scheduled_for_release;
 };
 
 struct kmmio_delayed_release {
@@ -398,8 +400,11 @@ static void release_kmmio_fault_page(uns
 	BUG_ON(f->count < 0);
 	if (!f->count) {
 		disarm_kmmio_fault_page(f);
-		f->release_next = *release_list;
-		*release_list = f;
+		if (!f->scheduled_for_release) {
+			f->release_next = *release_list;
+			*release_list = f;
+			f->scheduled_for_release = true;
+		}
 	}
 }
 
@@ -471,8 +476,10 @@ static void remove_kmmio_fault_pages(str
 			prevp = &f->release_next;
 		} else {
 			*prevp = f->release_next;
+			f->release_next = NULL;
+			f->scheduled_for_release = false;
 		}
-		f = f->release_next;
+		f = *prevp;
 	}
 	spin_unlock_irqrestore(&kmmio_lock, flags);
 
@@ -510,6 +517,9 @@ void unregister_kmmio_probe(struct kmmio
 	kmmio_count--;
 	spin_unlock_irqrestore(&kmmio_lock, flags);
 
+	if (!release_list)
+		return;
+
 	drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
 	if (!drelease) {
 		pr_crit("leaking kmmio_fault_page objects.\n");
--- a/arch/x86/mm/testmmiotrace.c
+++ b/arch/x86/mm/testmmiotrace.c
@@ -90,6 +90,27 @@ static void do_test(unsigned long size)
 	iounmap(p);
 }
 
+/*
+ * Tests how mmiotrace behaves in face of multiple ioremap / iounmaps in
+ * a short time. We had a bug in deferred freeing procedure which tried
+ * to free this region multiple times (ioremap can reuse the same address
+ * for many mappings).
+ */
+static void do_test_bulk_ioremapping(void)
+{
+	void __iomem *p;
+	int i;
+
+	for (i = 0; i < 10; ++i) {
+		p = ioremap_nocache(mmio_address, PAGE_SIZE);
+		if (p)
+			iounmap(p);
+	}
+
+	/* Force freeing. If it will crash we will know why. */
+	synchronize_rcu();
+}
+
 static int __init init(void)
 {
 	unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
@@ -104,6 +125,7 @@ static int __init init(void)
 		   "and writing 16 kB of rubbish in there.\n",
 		   size >> 10, mmio_address);
 	do_test(size);
+	do_test_bulk_ioremapping();
 	pr_info("All done.\n");
 	return 0;
 }

[06/67] x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Bjorn Helgaas <bjorn.helgaas@hp.com>

commit 2491762cfb475dbdfa3db11ebea6de49f58b7fac upstream.

This DMI quirk turns on "pci=use_crs" for the ALiveSATA2-GLAN because
amd_bus.c doesn't handle this system correctly.

The system has a single HyperTransport I/O chain, but has two PCI host
bridges to buses 00 and 80.  amd_bus.c learns the MMIO range associated
with buses 00-ff and that this range is routed to the HT chain hosted at
node 0, link 0:

    bus: [00, ff] on node 0 link 0
    bus: 00 index 1 [mem 0x80000000-0xfcffffffff]

This includes the address space for both bus 00 and bus 80, and amd_bus.c
assumes it's all routed to bus 00.

We find device 80:01.0, which BIOS left in the middle of that space, but
we don't find a bridge from bus 00 to bus 80, so we conclude that 80:01.0
is unreachable from bus 00, and we move it from the original, working,
address to something outside the bus 00 aperture, which does not work:

    pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
    pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]

The BIOS told us everything we need to know to handle this correctly,
so we're better off if we just pay attention, which lets us leave the
80:01.0 device at the original, working, address:

    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
    pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff]
    ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
    pci_root PNP0A08:00: host bridge window [mem 0xfebfc000-0xfebfffff]

This was a regression between 2.6.33 and 2.6.34.  In 2.6.33, amd_bus.c
was used only when we found multiple HT chains.  3e3da00c01d050, which
enabled amd_bus.c even on systems with a single HT chain, caused this
failure.

This quirk was written by Graham.  If we ever enable "pci=use_crs" for
machines from 2006 or earlir, this quirk should be removed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16007

Reported-by: Graham Ramsey <ramsey.graham@ntlworld.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/pci/acpi.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -34,6 +34,15 @@ static const struct dmi_system_id pci_us
 			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
+	/* 2006 AMD HT/VIA system with two host bridges */
+        {
+		.callback = set_use_crs,
+		.ident = "ASRock ALiveSATA2-GLAN",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
+                },
+        },
 	{}
 };
 

[07/67] pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dominik Brodowski <linux@dominikbrodowski.net>

commit 127c03cdbad9bd5af5d7f33bd31a1015a90cb77f upstream.

NR_IRQS may be as low as 16, causing a (harmless?) buffer overflow in
pcmcia_setup_isa_irq():

static u8 pcmcia_used_irq[NR_IRQS];

...

		if ((try < 32) && pcmcia_used_irq[irq])
			continue;

This is read-only, so if this address would be non-zero, it would just
mean we would not attempt an IRQ >= NR_IRQS -- which would fail anyway!
And as request_irq() fails for an irq >= NR_IRQS, the setting code path:

			pcmcia_used_irq[irq]++;

is never reached as well.

Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/pcmcia/pcmcia_resource.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -651,7 +651,7 @@ EXPORT_SYMBOL(__pcmcia_request_exclusive
 #ifdef CONFIG_PCMCIA_PROBE
 
 /* mask of IRQs already reserved by other cards, we should avoid using them */
-static u8 pcmcia_used_irq[NR_IRQS];
+static u8 pcmcia_used_irq[32];
 
 static irqreturn_t test_action(int cpl, void *dev_id)
 {
@@ -674,6 +674,9 @@ static int pcmcia_setup_isa_irq(struct p
 	for (try = 0; try < 64; try++) {
 		irq = try % 32;
 
+		if (irq > NR_IRQS)
+			continue;
+
 		/* marked as available by driver, not blocked by userspace? */
 		if (!((mask >> irq) & 1))
 			continue;

[08/67] x86: Add memory modify constraints to xchg() and cmpxchg()

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: H. Peter Anvin <hpa@zytor.com>

commit 113fc5a6e8c2288619ff7e8187a6f556b7e0d372 upstream.

xchg() and cmpxchg() modify their memory operands, not merely read
them.  For some versions of gcc the "memory" clobber has apparently
dealt with the situation, but not for all.

Originally-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Glauber Costa <glommer@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Peter Palfrader <peter@palfrader.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Zachary Amsden <zamsden@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
LKML-Reference: <4C4F7277.8050306@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/include/asm/cmpxchg_32.h |   68 +++++++++++++++++++-------------------
 arch/x86/include/asm/cmpxchg_64.h |   40 +++++++++++-----------
 2 files changed, 54 insertions(+), 54 deletions(-)

--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -27,20 +27,20 @@ struct __xchg_dummy {
 	switch (size) {							\
 	case 1:								\
 		asm volatile("xchgb %b0,%1"				\
-			     : "=q" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=q" (__x), "+m" (*__xg(ptr))		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
 	case 2:								\
 		asm volatile("xchgw %w0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=r" (__x), "+m" (*__xg(ptr))		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
 	case 4:								\
 		asm volatile("xchgl %0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=r" (__x), "+m" (*__xg(ptr))		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
 	default:							\
@@ -70,14 +70,14 @@ static inline void __set_64bit(unsigned
 			       unsigned int low, unsigned int high)
 {
 	asm volatile("\n1:\t"
-		     "movl (%0), %%eax\n\t"
-		     "movl 4(%0), %%edx\n\t"
-		     LOCK_PREFIX "cmpxchg8b (%0)\n\t"
+		     "movl (%1), %%eax\n\t"
+		     "movl 4(%1), %%edx\n\t"
+		     LOCK_PREFIX "cmpxchg8b (%1)\n\t"
 		     "jnz 1b"
-		     : /* no outputs */
-		     : "D"(ptr),
-		       "b"(low),
-		       "c"(high)
+		     : "=m" (*ptr)
+		     : "D" (ptr),
+		       "b" (low),
+		       "c" (high)
 		     : "ax", "dx", "memory");
 }
 
@@ -121,21 +121,21 @@ extern void __cmpxchg_wrong_size(void);
 	__typeof__(*(ptr)) __new = (new);				\
 	switch (size) {							\
 	case 1:								\
-		asm volatile(lock "cmpxchgb %b1,%2"			\
-			     : "=a"(__ret)				\
-			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+		asm volatile(lock "cmpxchgb %b2,%1"			\
+			     : "=a" (__ret), "+m" (*__xg(ptr))		\
+			     : "q" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
 	case 2:								\
-		asm volatile(lock "cmpxchgw %w1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+		asm volatile(lock "cmpxchgw %w2,%1"			\
+			     : "=a" (__ret), "+m" (*__xg(ptr))		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
 	case 4:								\
-		asm volatile(lock "cmpxchgl %1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+		asm volatile(lock "cmpxchgl %2,%1"			\
+			     : "=a" (__ret), "+m" (*__xg(ptr))		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
 	default:							\
@@ -180,12 +180,12 @@ static inline unsigned long long __cmpxc
 					     unsigned long long new)
 {
 	unsigned long long prev;
-	asm volatile(LOCK_PREFIX "cmpxchg8b %3"
-		     : "=A"(prev)
-		     : "b"((unsigned long)new),
-		       "c"((unsigned long)(new >> 32)),
-		       "m"(*__xg(ptr)),
-		       "0"(old)
+	asm volatile(LOCK_PREFIX "cmpxchg8b %1"
+		     : "=A" (prev),
+		       "+m" (*__xg(ptr))
+		     : "b" ((unsigned long)new),
+		       "c" ((unsigned long)(new >> 32)),
+		       "0" (old)
 		     : "memory");
 	return prev;
 }
@@ -195,12 +195,12 @@ static inline unsigned long long __cmpxc
 						   unsigned long long new)
 {
 	unsigned long long prev;
-	asm volatile("cmpxchg8b %3"
-		     : "=A"(prev)
-		     : "b"((unsigned long)new),
-		       "c"((unsigned long)(new >> 32)),
-		       "m"(*__xg(ptr)),
-		       "0"(old)
+	asm volatile("cmpxchg8b %1"
+		     : "=A" (prev),
+		       "+m" (*__xg(ptr))
+		     : "b" ((unsigned long)new),
+		       "c" ((unsigned long)(new >> 32)),
+		       "0" (old)
 		     : "memory");
 	return prev;
 }
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -26,26 +26,26 @@ extern void __cmpxchg_wrong_size(void);
 	switch (size) {							\
 	case 1:								\
 		asm volatile("xchgb %b0,%1"				\
-			     : "=q" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=q" (__x), "+m" (*__xg(ptr))		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
 	case 2:								\
 		asm volatile("xchgw %w0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=r" (__x), "+m" (*__xg(ptr))		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
 	case 4:								\
 		asm volatile("xchgl %k0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=r" (__x), "+m" (*__xg(ptr))		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
 	case 8:								\
 		asm volatile("xchgq %0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=r" (__x), "+m" (*__xg(ptr))		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
 	default:							\
@@ -71,27 +71,27 @@ extern void __cmpxchg_wrong_size(void);
 	__typeof__(*(ptr)) __new = (new);				\
 	switch (size) {							\
 	case 1:								\
-		asm volatile(lock "cmpxchgb %b1,%2"			\
-			     : "=a"(__ret)				\
-			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+		asm volatile(lock "cmpxchgb %b2,%1"			\
+			     : "=a" (__ret), "+m" (*__xg(ptr))		\
+			     : "q" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
 	case 2:								\
-		asm volatile(lock "cmpxchgw %w1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+		asm volatile(lock "cmpxchgw %w2,%1"			\
+			     : "=a" (__ret), "+m" (*__xg(ptr))		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
 	case 4:								\
-		asm volatile(lock "cmpxchgl %k1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+		asm volatile(lock "cmpxchgl %k2,%1"			\
+			     : "=a" (__ret), "+m" (*__xg(ptr))		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
 	case 8:								\
-		asm volatile(lock "cmpxchgq %1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+		asm volatile(lock "cmpxchgq %2,%1"			\
+			     : "=a" (__ret), "+m" (*__xg(ptr))		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
 	default:							\

[09/67] staging: rt2870: Add USB ID for Belkin F6D4050 v2

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 upstream.

Device missing from current tables.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Rod Huffaker <rod.huffaker@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/rt2860/usb_main_dev.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -64,6 +64,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x14B2, 0x3C07)},	/* AL */
 	{USB_DEVICE(0x050D, 0x8053)},	/* Belkin */
 	{USB_DEVICE(0x050D, 0x825B)},	/* Belkin */
+	{USB_DEVICE(0x050D, 0x935B)},	/* Belkin F6D4050 v2 */
 	{USB_DEVICE(0x14B2, 0x3C23)},	/* Airlink */
 	{USB_DEVICE(0x14B2, 0x3C27)},	/* Airlink */
 	{USB_DEVICE(0x07AA, 0x002F)},	/* Corega */

[10/67] Staging: line6: needs to select SND_PCM

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Randy Dunlap <randy.dunlap@oracle.com>

commit e928c077e5cdcd72ee762125b37232aec1ff49f3 upstream.

line6 uses snd_pcm*() functions, so it should select SND_PCM.

ERROR: "snd_pcm_period_elapsed" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_set_ops" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_free_pages" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_ioctl" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_hw_constraint_ratdens" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_format_physical_width" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_new" [drivers/staging/line6/line6usb.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/line6/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/line6/Kconfig
+++ b/drivers/staging/line6/Kconfig
@@ -2,6 +2,7 @@ config LINE6_USB
 	tristate "Line6 USB support"
 	depends on USB && SND
 	select SND_RAWMIDI
+	select SND_PCM
 	help
 	  This is a driver for the guitar amp, cab, and effects modeller
 	  PODxt Pro by Line6 (and similar devices), supporting the

[11/67] Staging: panel: Prevent double-calling of parport_release - fix oops.

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Peter Huewe <peterhuewe@gmx.de>

commit 060132ae42cce3f9d2fd34d9a17b98362b44b9f9 upstream.

This patch prevents the code from calling parport_release and
parport_unregister_device twice with the same arguments - and thus fixes an oops.

Rationale:
After the first call the parport is already released and the
handle isn't valid anymore and calling parport_release and
parport_unregister_device twice isn't a good idea.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/panel/panel.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -2179,6 +2179,7 @@ int panel_init(void)
 		if (pprt) {
 			parport_release(pprt);
 			parport_unregister_device(pprt);
+			pprt = NULL;
 		}
 		parport_unregister_driver(&panel_driver);
 		printk(KERN_ERR "Panel driver version " PANEL_VERSION
@@ -2228,6 +2229,7 @@ static void __exit panel_cleanup_module(
 		/* TODO: free all input signals */
 		parport_release(pprt);
 		parport_unregister_device(pprt);
+		pprt = NULL;
 	}
 	parport_unregister_driver(&panel_driver);
 }

[12/67] staging: hv: Fix Kconfig dependency of hv_blkvsc

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

commit 54d2379c20d814ced657cbc2c4ead8d1f8389fa2 upstream.

LBDAF is not available nor necessary on 64BIT kernel. This patch
fixed the dependency for hv_blkvsc module on 64BIT kernel.
Thanks vrataj2 [vrataj2@comcast.net] for reporting this problem.

Reported-by: vrataj2 <vrataj2@comcast.net>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/hv/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/hv/Kconfig
+++ b/drivers/staging/hv/Kconfig
@@ -17,7 +17,7 @@ config HYPERV_STORAGE
 
 config HYPERV_BLOCK
 	tristate "Microsoft Hyper-V virtual block driver"
-	depends on BLOCK && SCSI && LBDAF
+	depends on BLOCK && SCSI && (LBDAF || 64BIT)
 	default HYPERV
 	help
 	  Select this option to enable the Hyper-V virtual block driver.

[13/67] serial: add support for OX16PCI958 card

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Lytochkin Boris <lytboris@gmail.com>

commit e847003f00d5eca3e3b3a6a1199f82b51293faf6 upstream.

Signed-off-by: Lytochkin Boris <lytboris@gmail.com>
Tested-by: Lytochkin Boris <lytboris@gmail.com>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/serial/8250_pci.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct seria
 #define PCI_DEVICE_ID_TITAN_800E	0xA014
 #define PCI_DEVICE_ID_TITAN_200EI	0xA016
 #define PCI_DEVICE_ID_TITAN_200EISI	0xA017
+#define PCI_DEVICE_ID_OXSEMI_16PCI958	0x9538
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1542,6 +1543,8 @@ enum pci_board_num_t {
 	pbn_b2_4_921600,
 	pbn_b2_8_921600,
 
+	pbn_b2_8_1152000,
+
 	pbn_b2_bt_1_115200,
 	pbn_b2_bt_2_115200,
 	pbn_b2_bt_4_115200,
@@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards
 		.uart_offset	= 8,
 	},
 
+	[pbn_b2_8_1152000] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 8,
+		.base_baud	= 1152000,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b2_bt_1_115200] = {
 		.flags		= FL_BASE2|FL_BASE_BARS,
 		.num_ports	= 1,
@@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_t
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+		PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+		pbn_b2_8_1152000 },
 
 	/*
 	 * Oxford Semiconductor Inc. Tornado PCI express device range.

[14/67] PCI: Do not run NVidia quirks related to MSI with MSI disabled

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Rafael J. Wysocki <rjw@sisk.pl>

commit 3d2a531804d16cd8df6dbbb0429c6f143e756049 upstream.

There is no reason to run NVidia-specific quirks related to HT MSI
mappings with MSI disabled via pci=nomsi, so make
__nv_msi_ht_cap_quirk() return immediately in that case.

This allows at least one machine to boot 100% of the time with
pci=nomsi (it still doesn't boot reliably without that).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16443 .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/pci/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2390,6 +2390,9 @@ static void __devinit __nv_msi_ht_cap_qu
 	int pos;
 	int found;
 
+	if (!pci_msi_enabled())
+		return;
+
 	/* check if there is HT MSI cap or enabled on this device */
 	found = ht_check_msi_mapping(dev);
 

[15/67] PCI: disable MSI on VIA K8M800

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 549e15611b4ac1de51ef0e0a79c2704f50a638a2 upstream.

MSI delivery from on-board ahci controller doesn't work on K8M800.  At
this point, it's unclear whether the culprit is with the ahci
controller or the host bridge.  Given the track record and considering
the rather minimal impact of MSI, disabling it seems reasonable.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rainer Hurtado Navarro <publio.escipion.el.africano@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/pci/quirks.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2115,6 +2115,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
 
 /* Disable MSI on chipsets that are known to not support it */
 static void __devinit quirk_disable_msi(struct pci_dev *dev)

[16/67] solos-pci: Fix race condition in tasklet RX handling

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: David Woodhouse <David.Woodhouse@intel.com>

commit 1f6ea6e511e5ec730d8e88651da1b7b6e8fd1333 upstream.

We were seeing faults in the solos-pci receive tasklet when packets
arrived for a VCC which was currently being closed:

[18842.727906] EIP: [<e082f490>] br2684_push+0x19/0x234 [br2684] SS:ESP 0068:dfb89d14

[18845.090712] [<c13ecff3>] ? do_page_fault+0x0/0x2e1
[18845.120042] [<e082f490>] ? br2684_push+0x19/0x234 [br2684]
[18845.153530] [<e084fa13>] solos_bh+0x28b/0x7c8 [solos_pci]
[18845.186488] [<e084f711>] ? solos_irq+0x2d/0x51 [solos_pci]
[18845.219960] [<c100387b>] ? handle_irq+0x3b/0x48
[18845.247732] [<c10265cb>] ? irq_exit+0x34/0x57
[18845.274437] [<c1025720>] tasklet_action+0x42/0x69
[18845.303247] [<c102643f>] __do_softirq+0x8e/0x129
[18845.331540] [<c10264ff>] do_softirq+0x25/0x2a
[18845.358274] [<c102664c>] _local_bh_enable_ip+0x5e/0x6a
[18845.389677] [<c102666d>] local_bh_enable+0xb/0xe
[18845.417944] [<e08490a8>] ppp_unregister_channel+0x32/0xbb [ppp_generic]
[18845.458193] [<e08731ad>] pppox_unbind_sock+0x18/0x1f [pppox]

This patch uses an RCU-inspired approach to fix it. In the RX tasklet's
find_vcc() function we first refuse to use a VCC which already has the
ATM_VF_READY bit cleared. And in the VCC close function, we synchronise
with the tasklet to ensure that it can't still be using the VCC before
we continue and allow the VCC to be destroyed.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/atm/solos-pci.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -781,7 +781,8 @@ static struct atm_vcc *find_vcc(struct a
 	sk_for_each(s, node, head) {
 		vcc = atm_sk(s);
 		if (vcc->dev == dev && vcc->vci == vci &&
-		    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE)
+		    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
+		    test_bit(ATM_VF_READY, &vcc->flags))
 			goto out;
 	}
 	vcc = NULL;
@@ -907,6 +908,10 @@ static void pclose(struct atm_vcc *vcc)
 	clear_bit(ATM_VF_ADDR, &vcc->flags);
 	clear_bit(ATM_VF_READY, &vcc->flags);
 
+	/* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
+	   tasklet has finished processing any incoming packets (and, more to
+	   the point, using the vcc pointer). */
+	tasklet_unlock_wait(&card->tlet);
 	return;
 }
 

[17/67] x86, mtrr: Use stop machine context to rendezvous all the cpus

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Suresh Siddha <suresh.b.siddha@intel.com>

commit 68f202e4e87cfab4439568bf397fcc5c7cf8d729 upstream.

Use the stop machine context rather than IPI's to rendezvous all the cpus for
MTRR initialization that happens during cpu bringup or for MTRR modifications
during runtime.

This avoids deadlock scenario (reported by Prarit) like:

cpu A holds a read_lock (tasklist_lock for example) with irqs enabled
cpu B waits for the same lock with irqs disabled using write_lock_irq
cpu C doing set_mtrr() (during AP bringup for example), which will try to
rendezvous all the cpus using IPI's

This will result in C and A come to the rendezvous point and waiting
for B. B is stuck forever waiting for the lock and thus not
reaching the rendezvous point.

Using stop cpu (run in the process context of per cpu based keventd) to do
this rendezvous, avoids this deadlock scenario.

Also make sure all the cpu's are in the rendezvous handler before we proceed
with the local_irq_save() on each cpu. This lock step disabling irqs on all
the cpus will avoid other deadlock scenarios (for example involving
with the blocking smp_call_function's etc).

   [ This problem is very old. Marking -stable only for 2.6.35 as the
     stop_one_cpu_nowait() API is present only in 2.6.35. Any older
     kernel interested in this fix need to do some more work in backporting
     this patch. ]

Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1280515602.2682.10.camel@sbsiddha-MOBL3.sc.intel.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/cpu/mtrr/main.c |   56 ++++++++++++++++++++++++++++++----------
 arch/x86/kernel/smpboot.c       |    7 +++++
 2 files changed, 50 insertions(+), 13 deletions(-)

--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -35,6 +35,7 @@
 
 #include <linux/types.h> /* FIXME: kvm_para.h needs this */
 
+#include <linux/stop_machine.h>
 #include <linux/kvm_para.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
@@ -143,22 +144,28 @@ struct set_mtrr_data {
 	mtrr_type	smp_type;
 };
 
+static DEFINE_PER_CPU(struct cpu_stop_work, mtrr_work);
+
 /**
- * ipi_handler - Synchronisation handler. Executed by "other" CPUs.
+ * mtrr_work_handler - Synchronisation handler. Executed by "other" CPUs.
  * @info: pointer to mtrr configuration data
  *
  * Returns nothing.
  */
-static void ipi_handler(void *info)
+static int mtrr_work_handler(void *info)
 {
 #ifdef CONFIG_SMP
 	struct set_mtrr_data *data = info;
 	unsigned long flags;
 
+	atomic_dec(&data->count);
+	while (!atomic_read(&data->gate))
+		cpu_relax();
+
 	local_irq_save(flags);
 
 	atomic_dec(&data->count);
-	while (!atomic_read(&data->gate))
+	while (atomic_read(&data->gate))
 		cpu_relax();
 
 	/*  The master has cleared me to execute  */
@@ -173,12 +180,13 @@ static void ipi_handler(void *info)
 	}
 
 	atomic_dec(&data->count);
-	while (atomic_read(&data->gate))
+	while (!atomic_read(&data->gate))
 		cpu_relax();
 
 	atomic_dec(&data->count);
 	local_irq_restore(flags);
 #endif
+	return 0;
 }
 
 static inline int types_compatible(mtrr_type type1, mtrr_type type2)
@@ -198,7 +206,7 @@ static inline int types_compatible(mtrr_
  *
  * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
  *
- * 1. Send IPI to do the following:
+ * 1. Queue work to do the following on all processors:
  * 2. Disable Interrupts
  * 3. Wait for all procs to do so
  * 4. Enter no-fill cache mode
@@ -215,14 +223,17 @@ static inline int types_compatible(mtrr_
  * 15. Enable interrupts.
  *
  * What does that mean for us? Well, first we set data.count to the number
- * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
- * until it hits 0 and proceed. We set the data.gate flag and reset data.count.
- * Meanwhile, they are waiting for that flag to be set. Once it's set, each
+ * of CPUs. As each CPU announces that it started the rendezvous handler by
+ * decrementing the count, We reset data.count and set the data.gate flag
+ * allowing all the cpu's to proceed with the work. As each cpu disables
+ * interrupts, it'll decrement data.count once. We wait until it hits 0 and
+ * proceed. We clear the data.gate flag and reset data.count. Meanwhile, they
+ * are waiting for that flag to be cleared. Once it's cleared, each
  * CPU goes through the transition of updating MTRRs.
  * The CPU vendors may each do it differently,
  * so we call mtrr_if->set() callback and let them take care of it.
  * When they're done, they again decrement data->count and wait for data.gate
- * to be reset.
+ * to be set.
  * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag
  * Everyone then enables interrupts and we all continue on.
  *
@@ -234,6 +245,9 @@ set_mtrr(unsigned int reg, unsigned long
 {
 	struct set_mtrr_data data;
 	unsigned long flags;
+	int cpu;
+
+	preempt_disable();
 
 	data.smp_reg = reg;
 	data.smp_base = base;
@@ -246,10 +260,15 @@ set_mtrr(unsigned int reg, unsigned long
 	atomic_set(&data.gate, 0);
 
 	/* Start the ball rolling on other CPUs */
-	if (smp_call_function(ipi_handler, &data, 0) != 0)
-		panic("mtrr: timed out waiting for other CPUs\n");
+	for_each_online_cpu(cpu) {
+		struct cpu_stop_work *work = &per_cpu(mtrr_work, cpu);
+
+		if (cpu == smp_processor_id())
+			continue;
+
+		stop_one_cpu_nowait(cpu, mtrr_work_handler, &data, work);
+	}
 
-	local_irq_save(flags);
 
 	while (atomic_read(&data.count))
 		cpu_relax();
@@ -259,6 +278,16 @@ set_mtrr(unsigned int reg, unsigned long
 	smp_wmb();
 	atomic_set(&data.gate, 1);
 
+	local_irq_save(flags);
+
+	while (atomic_read(&data.count))
+		cpu_relax();
+
+	/* Ok, reset count and toggle gate */
+	atomic_set(&data.count, num_booting_cpus() - 1);
+	smp_wmb();
+	atomic_set(&data.gate, 0);
+
 	/* Do our MTRR business */
 
 	/*
@@ -279,7 +308,7 @@ set_mtrr(unsigned int reg, unsigned long
 
 	atomic_set(&data.count, num_booting_cpus() - 1);
 	smp_wmb();
-	atomic_set(&data.gate, 0);
+	atomic_set(&data.gate, 1);
 
 	/*
 	 * Wait here for everyone to have seen the gate change
@@ -289,6 +318,7 @@ set_mtrr(unsigned int reg, unsigned long
 		cpu_relax();
 
 	local_irq_restore(flags);
+	preempt_enable();
 }
 
 /**
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -816,6 +816,13 @@ do_rest:
 			if (cpumask_test_cpu(cpu, cpu_callin_mask))
 				break;	/* It has booted */
 			udelay(100);
+			/*
+			 * Allow other tasks to run while we wait for the
+			 * AP to come online. This also gives a chance
+			 * for the MTRR work(triggered by the AP coming online)
+			 * to be completed in the stop machine context.
+			 */
+			schedule();
 		}
 
 		if (cpumask_test_cpu(cpu, cpu_callin_mask))

[18/67] ALSA: hda - Add PC-beep whitelist for an Intel board

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit e096c8e6d5ed965f346d94befbbec2275dde3621 upstream.

An Intel board needs a white-list entry to enable PC-beep.
Otherwise the driver misdetects (due to bogus BIOS info) and ignores
the PC-beep on 2.6.35.

Reported-and-tested-by: Leandro Lucarella <luca@llucax.com.ar>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5183,6 +5183,7 @@ static void fillup_priv_adc_nids(struct
 
 static struct snd_pci_quirk beep_white_list[] = {
 	SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
+	SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1),
 	{}
 };
 

[19/67] Char: nozomi, fix tty->count counting

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit ee78bb95b7bea08b7774a02073ea2bb45611a9e1 upstream.

Currently ntty_install omits to increment tty count and we get the
following warnings:
Warning: dev (noz2) tty->count(0) != #fd's(1) in tty_open

So to fix that, add one tty->count++ there.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/nozomi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1611,6 +1611,7 @@ static int ntty_install(struct tty_drive
 	ret = tty_init_termios(tty);
 	if (ret == 0) {
 		tty_driver_kref_get(driver);
+		tty->count++;
 		driver->ttys[tty->index] = tty;
 	}
 	return ret;

[20/67] Char: nozomi, set tty->driver_data appropriately

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit bf9c1fca9ae9a79ed209e7ab2c10b3862f3f6f72 upstream.

Sorry, one more fix, this one depends on the other, so this is rather 2/2.
--

tty->driver_data is used all over the code, but never set. This
results in oopses like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000130
IP: [<ffffffff814a0040>] mutex_lock+0x10/0x40
...
Pid: 2157, comm: modem-manager Not tainted 2.6.34.1-0.1-desktop #1 2768DR7/2768DR7
RIP: 0010:[<ffffffff814a0040>]  [<ffffffff814a0040>] mutex_lock+0x10/0x40
RSP: 0018:ffff88007b16fa50  EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000130 RCX: 0000000000000003
RDX: 0000000000000003 RSI: 0000000000000286 RDI: 0000000000000130
RBP: 0000000000001000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000130
R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007b16feb4
...
Call Trace:
 [<ffffffffa077690d>] ntty_write_room+0x4d/0x90 [nozomi]
...

Set tty->driver_data to the computed port in .install to not recompute it in
every place where needed. Switch .open to use driver_data too.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/nozomi.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1612,6 +1612,7 @@ static int ntty_install(struct tty_drive
 	if (ret == 0) {
 		tty_driver_kref_get(driver);
 		tty->count++;
+		tty->driver_data = port;
 		driver->ttys[tty->index] = tty;
 	}
 	return ret;
@@ -1640,7 +1641,7 @@ static int ntty_activate(struct tty_port
 
 static int ntty_open(struct tty_struct *tty, struct file *filp)
 {
-	struct port *port = get_port_by_tty(tty);
+	struct port *port = tty->driver_data;
 	return tty_port_open(&port->port, tty, filp);
 }
 

[21/67] mm: fix corruption of hibernation caused by reusing swap during image saving

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

commit 966cca029f739716fbcc8068b8c6dfe381f86fc3 upstream.

Since 2.6.31, swap_map[]'s refcounting was changed to show that a used
swap entry is just for swap-cache, can be reused.  Then, while scanning
free entry in swap_map[], a swap entry may be able to be reclaimed and
reused.  It was caused by commit c9e444103b5e7a5 ("mm: reuse unused swap
entry if necessary").

But this caused deta corruption at resume. The scenario is

- Assume a clean-swap cache, but mapped.

- at hibernation_snapshot[], clean-swap-cache is saved as
  clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE.

- then, save_image() is called.  And reuse SWAP_HAS_CACHE entry to save
  image, and break the contents.

After resume:

- the memory reclaim runs and finds clean-not-referenced-swap-cache and
  discards it because it's marked as clean.  But here, the contents on
  disk and swap-cache is inconsistent.

Hance memory is corrupted.

This patch avoids the bug by not reclaiming swap-entry during hibernation.
This is a quick fix for backporting.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 mm/swapfile.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -318,8 +318,10 @@ checks:
 	if (offset > si->highest_bit)
 		scan_base = offset = si->lowest_bit;
 
-	/* reuse swap entry of cache-only swap if not busy. */
-	if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+	/* reuse swap entry of cache-only swap if not hibernation. */
+	if (vm_swap_full()
+		&& usage == SWAP_HAS_CACHE
+		&& si->swap_map[offset] == SWAP_HAS_CACHE) {
 		int swap_was_freed;
 		spin_unlock(&swap_lock);
 		swap_was_freed = __try_to_reclaim_swap(si, offset);

[22/67] drivers/video/w100fb.c: ignore void return value / fix build failure

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Peter Huewe <peterhuewe@gmx.de>

commit fa260c00c1aa5c657793a7221e40d2400df5afd8 upstream.

Fix a build failure "error: void value not ignored as it ought to be"
by removing an assignment of a void return value.  The functionality of
the code is not changed.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/video/w100fb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -858,9 +858,9 @@ unsigned long w100fb_gpio_read(int port)
 void w100fb_gpio_write(int port, unsigned long value)
 {
 	if (port==W100_GPIO_PORT_A)
-		value = writel(value, remapped_regs + mmGPIO_DATA);
+		writel(value, remapped_regs + mmGPIO_DATA);
 	else
-		value = writel(value, remapped_regs + mmGPIO_DATA2);
+		writel(value, remapped_regs + mmGPIO_DATA2);
 }
 EXPORT_SYMBOL(w100fb_gpio_read);
 EXPORT_SYMBOL(w100fb_gpio_write);

[23/67] iwlwifi: fix TX tracer

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit e95b743536937a72e1560c85696b425c5d1a1c18 upstream.

The TX tracing code copies with the wrong length,
which will typically copy too little data. Fix
this by using the correct length variable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/wireless/iwlwifi/iwl-devtrace.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -193,7 +193,7 @@ TRACE_EVENT(iwlwifi_dev_tx,
 		__entry->framelen = buf0_len + buf1_len;
 		memcpy(__get_dynamic_array(tfd), tfd, tfdlen);
 		memcpy(__get_dynamic_array(buf0), buf0, buf0_len);
-		memcpy(__get_dynamic_array(buf1), buf1, buf0_len);
+		memcpy(__get_dynamic_array(buf1), buf1, buf1_len);
 	),
 	TP_printk("[%p] TX %.2x (%zu bytes)",
 		  __entry->priv,

[24/67] rtl8180: avoid potential NULL deref in rtl8180_beacon_work

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: John W. Linville <linville@tuxdriver.com>

commit 8f1d2d2be73a98c21e68fe2a26f633892d4abdd1 upstream.

ieee80211_beacon_get can return NULL...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/wireless/rtl818x/rtl8180_dev.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -688,6 +688,8 @@ void rtl8180_beacon_work(struct work_str
 
 	/* grab a fresh beacon */
 	skb = ieee80211_beacon_get(dev, vif);
+	if (!skb)
+		goto resched;
 
 	/*
 	 * update beacon timestamp w/ TSF value

[25/67] ipmi: fix ACPI detection with regspacing

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Yinghai Lu <yinghai@kernel.org>

commit d9e1b6c45059ccfff647a120769ae86da78dfdc4 upstream.

After the commit that changed ipmi_si detecting sequence from SMBIOS/ACPI
to ACPI/SMBIOS,

| commit 754d453185275951d39792865927ec494fa1ebd8
| Author: Matthew Garrett <mjg@redhat.com>
| Date:   Wed May 26 14:43:47 2010 -0700
|
|    ipmi: change device discovery order
|
|    The ipmi spec provides an ordering for si discovery.  Change the driver to
|    match, with the exception of preferring smbios to SPMI as HPs (at least)
|    contain accurate information in the former but not the latter.

ipmi_si can not be initialized.

[  138.799739] calling  init_ipmi_devintf+0x0/0x109 @ 1
[  138.805050] ipmi device interface
[  138.818131] initcall init_ipmi_devintf+0x0/0x109 returned 0 after 12797 usecs
[  138.822998] calling  init_ipmi_si+0x0/0xa90 @ 1
[  138.840276] IPMI System Interface driver.
[  138.846137] ipmi_si: probing via ACPI
[  138.849225] ipmi_si 00:09: [io  0x0ca2] regsize 1 spacing 1 irq 0
[  138.864438] ipmi_si: Adding ACPI-specified kcs state machine
[  138.870893] ipmi_si: probing via SMBIOS
[  138.880945] ipmi_si: Adding SMBIOS-specified kcs state machineipmi_si: duplicate interface
[  138.896511] ipmi_si: probing via SPMI
[  138.899861] ipmi_si: Adding SPMI-specified kcs state machineipmi_si: duplicate interface
[  138.917095] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[  138.928658] ipmi_si: Interface detection failed
[  138.953411] initcall init_ipmi_si+0x0/0xa90 returned 0 after 110847 usecs

in smbios has
DMI/SMBIOS
Handle 0x00C5, DMI type 38, 18 bytes
IPMI Device Information
        Interface Type: KCS (Keyboard Control Style)
        Specification Version: 2.0
        I2C Slave Address: 0x00
        NV Storage Device: Not Present
        Base Address: 0x0000000000000CA2 (I/O)
        Register Spacing: 32-bit Boundaries
in DSDT has
                    Device (BMC)
                    {

                        Name (_HID, EisaId ("IPI0001"))
                        Method (_STA, 0, NotSerialized)
                        {
                            If (LEqual (OSN, Zero))
                            {
                                Return (Zero)
                            }

                            Return (0x0F)
                        }

                        Name (_STR, Unicode ("IPMI_KCS"))
                        Name (_UID, Zero)
                        Name (_CRS, ResourceTemplate ()
                        {
                            IO (Decode16,
                                0x0CA2,             // Range Minimum
                                0x0CA2,             // Range Maximum
                                0x00,               // Alignment
                                0x01,               // Length
                                )
                            IO (Decode16,
                                0x0CA6,             // Range Minimum
                                0x0CA6,             // Range Maximum
                                0x00,               // Alignment
                                0x01,               // Length
                                )
                        })
                        Method (_IFT, 0, NotSerialized)
                        {
                            Return (One)
                        }

                        Method (_SRV, 0, NotSerialized)
                        {
                            Return (0x0200)
                        }
                    }

so the reg spacing should be 4 instead of 1.

Try to calculate regspacing for this kind of system.

Observed on a Sun Fire X4800.  Other OSes work and pass certification.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Myron Stowe <myron.stowe@hp.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/ipmi/ipmi_si_intf.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2176,6 +2176,14 @@ static int __devinit ipmi_pnp_probe(stru
 	info->io.addr_data = res->start;
 
 	info->io.regspacing = DEFAULT_REGSPACING;
+	res = pnp_get_resource(dev,
+			       (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
+					IORESOURCE_IO : IORESOURCE_MEM,
+			       1);
+	if (res) {
+		if (res->start > info->io.addr_data)
+			info->io.regspacing = res->start - info->io.addr_data;
+	}
 	info->io.regsize = DEFAULT_REGSPACING;
 	info->io.regshift = 0;
 

[26/67] ide-cd: Do not access completed requests in the irq handler

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Borislav Petkov <bp@alien8.de>

commit 110712828365ccafcc61a7f4db44c31ed4cf8793 upstream.

ide_cd_error_cmd() can complete an erroneous request with leftover
buffers. Signal this with its return value so that the request is not
accessed after its completion in the irq handler and we oops.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/ide/ide-cd.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -506,15 +506,22 @@ int ide_cd_queue_pc(ide_drive_t *drive,
 	return (flags & REQ_FAILED) ? -EIO : 0;
 }
 
-static void ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd)
+/*
+ * returns true if rq has been completed
+ */
+static bool ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	unsigned int nr_bytes = cmd->nbytes - cmd->nleft;
 
 	if (cmd->tf_flags & IDE_TFLAG_WRITE)
 		nr_bytes -= cmd->last_xfer_len;
 
-	if (nr_bytes > 0)
+	if (nr_bytes > 0) {
 		ide_complete_rq(drive, 0, nr_bytes);
+		return true;
+	}
+
+	return false;
 }
 
 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
@@ -679,7 +686,8 @@ out_end:
 		}
 
 		if (uptodate == 0 && rq->bio)
-			ide_cd_error_cmd(drive, cmd);
+			if (ide_cd_error_cmd(drive, cmd))
+				return ide_stopped;
 
 		/* make sure it's fully ended */
 		if (blk_fs_request(rq) == 0) {

[27/67] md: move revalidate_disk() back outside open_mutex

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 147e0b6a639ac581ca3bf627bedc3f4a6d3eca66 upstream.

Commit b821eaa5 "md: remove ->changed and related code" moved
revalidate_disk() under open_mutex, and lockdep noticed.

[ INFO: possible circular locking dependency detected ]
2.6.32-mdadm-locking #1
-------------------------------------------------------
mdadm/3640 is trying to acquire lock:
 (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff811acecb>] revalidate_disk+0x5b/0x90

but task is already holding lock:
 (&mddev->open_mutex){+.+...}, at: [<ffffffffa055e07a>] do_md_stop+0x4a/0x4d0 [md_mod]

which lock already depends on the new lock.

It is suitable for 2.6.35.x

Reported-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/md.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4711,7 +4711,7 @@ out:
  */
 static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 {
-	int err = 0;
+	int err = 0, revalidate = 0;
 	struct gendisk *disk = mddev->gendisk;
 	mdk_rdev_t *rdev;
 
@@ -4740,7 +4740,7 @@ static int do_md_stop(mddev_t * mddev, i
 			}
 
 		set_capacity(disk, 0);
-		revalidate_disk(disk);
+		revalidate = 1;
 
 		if (mddev->ro)
 			mddev->ro = 0;
@@ -4748,6 +4748,8 @@ static int do_md_stop(mddev_t * mddev, i
 		err = 0;
 	}
 	mutex_unlock(&mddev->open_mutex);
+	if (revalidate)
+		revalidate_disk(disk);
 	if (err)
 		return err;
 	/*

[28/67] md: fix another deadlock with removing sysfs attributes.

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: NeilBrown <neilb@suse.de>

commit bb4f1e9d0e2ef93de8e36ca0f5f26625fcd70b7d upstream.

Move the deletion of sysfs attributes from reconfig_mutex to
open_mutex didn't really help as a process can try to take
open_mutex while holding reconfig_mutex, so the same deadlock can
happen, just requiring one more process to be involved in the chain.

I looks like I cannot easily use locking to wait for the sysfs
deletion to complete, so don't.

The only things that we cannot do while the deletions are still
pending is other things which can change the sysfs namespace: run,
takeover, stop.  Each of these can fail with -EBUSY.
So set a flag while doing a sysfs deletion, and fail run, takeover,
stop if that flag is set.

This is suitable for 2.6.35.x

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/md.c |   31 +++++++++++++++++--------------
 drivers/md/md.h |    4 ++++
 2 files changed, 21 insertions(+), 14 deletions(-)

--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -532,13 +532,17 @@ static void mddev_unlock(mddev_t * mddev
 		 * an access to the files will try to take reconfig_mutex
 		 * while holding the file unremovable, which leads to
 		 * a deadlock.
-		 * So hold open_mutex instead - we are allowed to take
-		 * it while holding reconfig_mutex, and md_run can
-		 * use it to wait for the remove to complete.
+		 * So hold set sysfs_active while the remove in happeing,
+		 * and anything else which might set ->to_remove or my
+		 * otherwise change the sysfs namespace will fail with
+		 * -EBUSY if sysfs_active is still set.
+		 * We set sysfs_active under reconfig_mutex and elsewhere
+		 * test it under the same mutex to ensure its correct value
+		 * is seen.
 		 */
 		struct attribute_group *to_remove = mddev->to_remove;
 		mddev->to_remove = NULL;
-		mutex_lock(&mddev->open_mutex);
+		mddev->sysfs_active = 1;
 		mutex_unlock(&mddev->reconfig_mutex);
 
 		if (to_remove != &md_redundancy_group)
@@ -550,7 +554,7 @@ static void mddev_unlock(mddev_t * mddev
 				sysfs_put(mddev->sysfs_action);
 			mddev->sysfs_action = NULL;
 		}
-		mutex_unlock(&mddev->open_mutex);
+		mddev->sysfs_active = 0;
 	} else
 		mutex_unlock(&mddev->reconfig_mutex);
 
@@ -2960,7 +2964,9 @@ level_store(mddev_t *mddev, const char *
 	 *  - new personality will access other array.
 	 */
 
-	if (mddev->sync_thread || mddev->reshape_position != MaxSector)
+	if (mddev->sync_thread ||
+	    mddev->reshape_position != MaxSector ||
+	    mddev->sysfs_active)
 		return -EBUSY;
 
 	if (!mddev->pers->quiesce) {
@@ -4344,13 +4350,9 @@ static int md_run(mddev_t *mddev)
 
 	if (mddev->pers)
 		return -EBUSY;
-
-	/* These two calls synchronise us with the
-	 * sysfs_remove_group calls in mddev_unlock,
-	 * so they must have completed.
-	 */
-	mutex_lock(&mddev->open_mutex);
-	mutex_unlock(&mddev->open_mutex);
+	/* Cannot run until previous stop completes properly */
+	if (mddev->sysfs_active)
+		return -EBUSY;
 
 	/*
 	 * Analyze all RAID superblock(s)
@@ -4716,7 +4718,8 @@ static int do_md_stop(mddev_t * mddev, i
 	mdk_rdev_t *rdev;
 
 	mutex_lock(&mddev->open_mutex);
-	if (atomic_read(&mddev->openers) > is_open) {
+	if (atomic_read(&mddev->openers) > is_open ||
+	    mddev->sysfs_active) {
 		printk("md: %s still in use.\n",mdname(mddev));
 		err = -EBUSY;
 	} else if (mddev->pers) {
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -125,6 +125,10 @@ struct mddev_s
 	int				suspended;
 	atomic_t			active_io;
 	int				ro;
+	int				sysfs_active; /* set when sysfs deletes
+						       * are happening, so run/
+						       * takeover/stop are not safe
+						       */
 
 	struct gendisk			*gendisk;
 

[29/67] md/raid10: fix deadlock with unaligned read during resync

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: NeilBrown <neilb@suse.de>

commit 51e9ac77035a3dfcb6fc0a88a0d80b6f99b5edb1 upstream.

If the 'bio_split' path in raid10-read is used while
resync/recovery is happening it is possible to deadlock.
Fix this be elevating ->nr_waiting for the duration of both
parts of the split request.

This fixes a bug that has been present since 2.6.22
but has only started manifesting recently for unknown reasons.
It is suitable for and -stable since then.

Reported-by:  Justin Bronder <jsbronder@gentoo.org>
Tested-by:  Justin Bronder <jsbronder@gentoo.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/raid10.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -825,11 +825,29 @@ static int make_request(mddev_t *mddev,
 		 */
 		bp = bio_split(bio,
 			       chunk_sects - (bio->bi_sector & (chunk_sects - 1)) );
+
+		/* Each of these 'make_request' calls will call 'wait_barrier'.
+		 * If the first succeeds but the second blocks due to the resync
+		 * thread raising the barrier, we will deadlock because the
+		 * IO to the underlying device will be queued in generic_make_request
+		 * and will never complete, so will never reduce nr_pending.
+		 * So increment nr_waiting here so no new raise_barriers will
+		 * succeed, and so the second wait_barrier cannot block.
+		 */
+		spin_lock_irq(&conf->resync_lock);
+		conf->nr_waiting++;
+		spin_unlock_irq(&conf->resync_lock);
+
 		if (make_request(mddev, &bp->bio1))
 			generic_make_request(&bp->bio1);
 		if (make_request(mddev, &bp->bio2))
 			generic_make_request(&bp->bio2);
 
+		spin_lock_irq(&conf->resync_lock);
+		conf->nr_waiting--;
+		wake_up(&conf->wait_barrier);
+		spin_unlock_irq(&conf->resync_lock);
+
 		bio_pair_release(bp);
 		return 0;
 	bad_map:

[30/67] e100/e1000*/igb*/ixgb*: Add missing read memory barrier

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

commit 2d0bb1c1f4524befe9f0fcf0d0cd3081a451223f upstream.

Based on patches from Sonny Rao and Milton Miller...

Combined the patches to fix up clean_tx_irq and clean_rx_irq.

The PowerPC architecture does not require loads to independent bytes
to be ordered without adding an explicit barrier.

In ixgbe_clean_rx_irq we load the status bit then load the packet data.
With packet split disabled if these loads go out of order we get a
stale packet, but we will notice the bad sequence numbers and drop it.

The problem occurs with packet split enabled where the TCP/IP header
and data are in different descriptors. If the reads go out of order
we may have data that doesn't match the TCP/IP header. Since we use
hardware checksumming this bad data is never verified and it makes it
all the way to the application.

This bug was found during stress testing and adding this barrier has
been shown to fix it.  The bug can manifest as a data integrity issue
(bad payload data) or as a BUG in skb_pull().

This was a nasty bug to hunt down, if people agree with the fix I think
it's a candidate for stable.

Previously Submitted to e1000-devel only for ixgbe

http://marc.info/?l=e1000-devel&m=126593062701537&w=3

We've now seen this problem hit with other device drivers (e1000e mostly)
So I'm resubmitting with fixes for other Intel Device Drivers with
similar issues.

CC: Milton Miller <miltonm@bga.com>
CC: Anton Blanchard <anton@samba.org>
CC: Sonny Rao <sonnyrao@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/e100.c                 |    2 ++
 drivers/net/e1000/e1000_main.c     |    3 +++
 drivers/net/e1000e/netdev.c        |    4 ++++
 drivers/net/igb/igb_main.c         |    2 ++
 drivers/net/igbvf/netdev.c         |    2 ++
 drivers/net/ixgb/ixgb_main.c       |    2 ++
 drivers/net/ixgbe/ixgbe_main.c     |    1 +
 drivers/net/ixgbevf/ixgbevf_main.c |    2 ++
 8 files changed, 18 insertions(+)

--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1779,6 +1779,7 @@ static int e100_tx_clean(struct nic *nic
 	for (cb = nic->cb_to_clean;
 	    cb->status & cpu_to_le16(cb_complete);
 	    cb = nic->cb_to_clean = cb->next) {
+		rmb(); /* read skb after status */
 		netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev,
 			     "cb[%d]->status = 0x%04X\n",
 			     (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
@@ -1927,6 +1928,7 @@ static int e100_rx_indicate(struct nic *
 
 	netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev,
 		     "status=0x%04X\n", rfd_status);
+	rmb(); /* read size after status bit */
 
 	/* If data isn't ready, nothing to indicate */
 	if (unlikely(!(rfd_status & cb_complete))) {
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3448,6 +3448,7 @@ static bool e1000_clean_tx_irq(struct e1
 	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
 		bool cleaned = false;
+		rmb();	/* read buffer_info after eop_desc */
 		for ( ; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -3637,6 +3638,7 @@ static bool e1000_clean_jumbo_rx_irq(str
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
@@ -3843,6 +3845,7 @@ static bool e1000_clean_rx_irq(struct e1
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -774,6 +774,7 @@ static bool e1000_clean_rx_irq(struct e1
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
@@ -984,6 +985,7 @@ static bool e1000_clean_tx_irq(struct e1
 	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
 		bool cleaned = false;
+		rmb(); /* read buffer_info after eop_desc */
 		for (; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -1080,6 +1082,7 @@ static bool e1000_clean_rx_irq_ps(struct
 			break;
 		(*work_done)++;
 		skb = buffer_info->skb;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
 		/* in the packet split case this is header only */
 		prefetch(skb->data - NET_IP_ALIGN);
@@ -1279,6 +1282,7 @@ static bool e1000_clean_jumbo_rx_irq(str
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -5344,6 +5344,7 @@ static bool igb_clean_tx_irq(struct igb_
 
 	while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
+		rmb();	/* read buffer_info after eop_desc status */
 		for (cleaned = false; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -5549,6 +5550,7 @@ static bool igb_clean_rx_irq_adv(struct
 		if (*work_done >= budget)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		skb = buffer_info->skb;
 		prefetch(skb->data - NET_IP_ALIGN);
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -248,6 +248,7 @@ static bool igbvf_clean_rx_irq(struct ig
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		buffer_info = &rx_ring->buffer_info[i];
 
@@ -780,6 +781,7 @@ static bool igbvf_clean_tx_irq(struct ig
 
 	while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
+		rmb();	/* read buffer_info after eop_desc status */
 		for (cleaned = false; !cleaned; count++) {
 			tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1816,6 +1816,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *a
 
 	while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
 
+		rmb(); /* read buffer_info after eop_desc */
 		for (cleaned = false; !cleaned; ) {
 			tx_desc = IXGB_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -1976,6 +1977,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *a
 			break;
 
 		(*work_done)++;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 		status = rx_desc->status;
 		skb = buffer_info->skb;
 		buffer_info->skb = NULL;
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -748,6 +748,7 @@ static bool ixgbe_clean_tx_irq(struct ix
 	while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
 	       (count < tx_ring->work_limit)) {
 		bool cleaned = false;
+		rmb(); /* read buffer_info after eop_desc */
 		for ( ; !cleaned; count++) {
 			struct sk_buff *skb;
 			tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -231,6 +231,7 @@ static bool ixgbevf_clean_tx_irq(struct
 	while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
 	       (count < tx_ring->work_limit)) {
 		bool cleaned = false;
+		rmb(); /* read buffer_info after eop_desc */
 		for ( ; !cleaned; count++) {
 			struct sk_buff *skb;
 			tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
@@ -518,6 +519,7 @@ static bool ixgbevf_clean_rx_irq(struct
 			break;
 		(*work_done)++;
 
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
 			hdr_info = le16_to_cpu(ixgbevf_get_hdr_info(rx_desc));
 			len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>

[31/67] ioat2: catch and recover from broken vtd configurations v6

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 556ab45f9a775bfa4762bacc0a4afb5b44b067bc upstream.

On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the
incorrect iommu causing faults when the driver initializes.  Add a quirk
to catch this misconfiguration and try falling back to untranslated
operation (which works in the MacPro3,1 case).

Assuming there are other platforms with misconfigured iommus teach the
ioatdma driver to treat initialization failures as non-fatal (just fail
the driver load and emit a warning instead of triggering a BUG_ON).

This can be classified as a boot regression since 2.6.32 on affected
platforms since the ioatdma module did not autoload prior to that
kernel.

Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-by: Chris Li <lkml@chrisli.org>
Tested-by: Chris Li <lkml@chrisli.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/dma/ioat/dma.h    |    1 +
 drivers/dma/ioat/dma_v2.c |   24 ++++++++++++++++++++++--
 drivers/dma/ioat/dma_v3.c |    5 ++++-
 drivers/pci/intel-iommu.c |   28 ++++++++++++++++++++++++++++
 4 files changed, 55 insertions(+), 3 deletions(-)

--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -97,6 +97,7 @@ struct ioat_chan_common {
 	#define IOAT_RESET_PENDING 2
 	#define IOAT_KOBJ_INIT_FAIL 3
 	#define IOAT_RESHAPE_PENDING 4
+	#define IOAT_RUN 5
 	struct timer_list timer;
 	#define COMPLETION_TIMEOUT msecs_to_jiffies(100)
 	#define IDLE_TIMEOUT msecs_to_jiffies(2000)
--- a/drivers/dma/ioat/dma_v2.c
+++ b/drivers/dma/ioat/dma_v2.c
@@ -287,7 +287,10 @@ void ioat2_timer_event(unsigned long dat
 			chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
 			dev_err(to_dev(chan), "%s: Channel halted (%x)\n",
 				__func__, chanerr);
-			BUG_ON(is_ioat_bug(chanerr));
+			if (test_bit(IOAT_RUN, &chan->state))
+				BUG_ON(is_ioat_bug(chanerr));
+			else /* we never got off the ground */
+				return;
 		}
 
 		/* if we haven't made progress and we have already
@@ -492,6 +495,8 @@ static struct ioat_ring_ent **ioat2_allo
 	return ring;
 }
 
+void ioat2_free_chan_resources(struct dma_chan *c);
+
 /* ioat2_alloc_chan_resources - allocate/initialize ioat2 descriptor ring
  * @chan: channel to be initialized
  */
@@ -500,6 +505,7 @@ int ioat2_alloc_chan_resources(struct dm
 	struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
 	struct ioat_chan_common *chan = &ioat->base;
 	struct ioat_ring_ent **ring;
+	u64 status;
 	int order;
 
 	/* have we already been set up? */
@@ -540,7 +546,20 @@ int ioat2_alloc_chan_resources(struct dm
 	tasklet_enable(&chan->cleanup_task);
 	ioat2_start_null_desc(ioat);
 
-	return 1 << ioat->alloc_order;
+	/* check that we got off the ground */
+	udelay(5);
+	status = ioat_chansts(chan);
+	if (is_ioat_active(status) || is_ioat_idle(status)) {
+		set_bit(IOAT_RUN, &chan->state);
+		return 1 << ioat->alloc_order;
+	} else {
+		u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+
+		dev_WARN(to_dev(chan),
+			"failed to start channel chanerr: %#x\n", chanerr);
+		ioat2_free_chan_resources(c);
+		return -EFAULT;
+	}
 }
 
 bool reshape_ring(struct ioat2_dma_chan *ioat, int order)
@@ -778,6 +797,7 @@ void ioat2_free_chan_resources(struct dm
 	del_timer_sync(&chan->timer);
 	device->cleanup_fn((unsigned long) c);
 	device->reset_hw(chan);
+	clear_bit(IOAT_RUN, &chan->state);
 
 	spin_lock_bh(&chan->cleanup_lock);
 	spin_lock_bh(&ioat->prep_lock);
--- a/drivers/dma/ioat/dma_v3.c
+++ b/drivers/dma/ioat/dma_v3.c
@@ -361,7 +361,10 @@ static void ioat3_timer_event(unsigned l
 			chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
 			dev_err(to_dev(chan), "%s: Channel halted (%x)\n",
 				__func__, chanerr);
-			BUG_ON(is_ioat_bug(chanerr));
+			if (test_bit(IOAT_RUN, &chan->state))
+				BUG_ON(is_ioat_bug(chanerr));
+			else /* we never got off the ground */
+				return;
 		}
 
 		/* if we haven't made progress and we have already
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -3030,6 +3030,34 @@ static void __init iommu_exit_mempool(vo
 
 }
 
+static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev)
+{
+	struct dmar_drhd_unit *drhd;
+	u32 vtbar;
+	int rc;
+
+	/* We know that this device on this chipset has its own IOMMU.
+	 * If we find it under a different IOMMU, then the BIOS is lying
+	 * to us. Hope that the IOMMU for this device is actually
+	 * disabled, and it needs no translation...
+	 */
+	rc = pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(0, 0), 0xb0, &vtbar);
+	if (rc) {
+		/* "can't" happen */
+		dev_info(&pdev->dev, "failed to run vt-d quirk\n");
+		return;
+	}
+	vtbar &= 0xffff0000;
+
+	/* we know that the this iommu should be at offset 0xa000 from vtbar */
+	drhd = dmar_find_matched_drhd_unit(pdev);
+	if (WARN_TAINT_ONCE(!drhd || drhd->reg_base_addr - vtbar != 0xa000,
+			    TAINT_FIRMWARE_WORKAROUND,
+			    "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n"))
+		pdev->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB, quirk_ioat_snb_local_iommu);
+
 static void __init init_no_remapping_devices(void)
 {
 	struct dmar_drhd_unit *drhd;

[32/67] Fix sget() race with failing mount

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 7a4dec53897ecd3367efb1e12fe8a4edc47dc0e9 upstream.

If sget() finds a matching superblock being set up, it'll
grab an active reference to it and grab s_umount.  That's
fine - we'll wait for completion of foofs_get_sb() that way.
However, if said foofs_get_sb() fails we'll end up holding
the halfway-created superblock.  deactivate_locked_super()
called by foofs_get_sb() will just unlock the sucker since
we are holding another active reference to it.

What we need is a way to tell if superblock has been successfully
set up.  Unfortunately, neither ->s_root nor the check for
MS_ACTIVE quite fit.  Cheap and easy way, suitable for backport:
new flag set by the (only) caller of ->get_sb().  If that flag
isn't present by the time sget() grabbed s_umount on preexisting
superblock it has found, it's seeing a stillborn and should
just bury it with deactivate_locked_super() (and repeat the search).

Longer term we want to set that flag in ->get_sb() instances (and
check for it to distinguish between "sget() found us a live sb"
and "sget() has allocated an sb, we need to set it up" in there,
instead of checking ->s_root as we do now).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/namespace.c     |    2 +-
 fs/super.c         |    6 ++++++
 include/linux/fs.h |    1 +
 3 files changed, 8 insertions(+), 1 deletion(-)

--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1984,7 +1984,7 @@ long do_mount(char *dev_name, char *dir_
 	if (flags & MS_RDONLY)
 		mnt_flags |= MNT_READONLY;
 
-	flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE |
+	flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE | MS_BORN |
 		   MS_NOATIME | MS_NODIRATIME | MS_RELATIME| MS_KERNMOUNT |
 		   MS_STRICTATIME);
 
--- a/fs/super.c
+++ b/fs/super.c
@@ -305,8 +305,13 @@ retry:
 			if (s) {
 				up_write(&s->s_umount);
 				destroy_super(s);
+				s = NULL;
 			}
 			down_write(&old->s_umount);
+			if (unlikely(!(old->s_flags & MS_BORN))) {
+				deactivate_locked_super(old);
+				goto retry;
+			}
 			return old;
 		}
 	}
@@ -909,6 +914,7 @@ vfs_kern_mount(struct file_system_type *
 		goto out_free_secdata;
 	BUG_ON(!mnt->mnt_sb);
 	WARN_ON(!mnt->mnt_sb->s_bdi);
+	mnt->mnt_sb->s_flags |= MS_BORN;
 
 	error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata);
 	if (error)
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -209,6 +209,7 @@ struct inodes_stat_t {
 #define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
 #define MS_I_VERSION	(1<<23) /* Update inode I_version field */
 #define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
+#define MS_BORN		(1<<29)
 #define MS_ACTIVE	(1<<30)
 #define MS_NOUSER	(1<<31)
 

[33/67] blkdev: cgroup whitelist permission fix

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Chris Wright <chrisw@sous-sol.org>

commit b7300b78d1a87625975a799a109a2f98d77757c8 upstream.

The cgroup device whitelist code gets confused when trying to grant
permission to a disk partition that is not currently open.  Part of
blkdev_open() includes __blkdev_get() on the whole disk.

Basically, the only ways to reliably allow a cgroup access to a partition
on a block device when using the whitelist are to 1) also give it access
to the whole block device or 2) make sure the partition is already open in
a different context.

The patch avoids the cgroup check for the whole disk case when opening a
partition.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=589662

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Serge E. Hallyn <serue@us.ibm.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/block_dev.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1339,10 +1339,12 @@ static int __blkdev_get(struct block_dev
 	/*
 	 * hooks: /n/, see "layering violations".
 	 */
-	ret = devcgroup_inode_permission(bdev->bd_inode, perm);
-	if (ret != 0) {
-		bdput(bdev);
-		return ret;
+	if (!for_part) {
+		ret = devcgroup_inode_permission(bdev->bd_inode, perm);
+		if (ret != 0) {
+			bdput(bdev);
+			return ret;
+		}
 	}
 
 	lock_kernel();

[34/67] eCryptfs: Handle ioctl calls with unlocked and compat functions

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

commit c43f7b8fb03be8bcc579bfc4e6ab70eac887ab55 upstream.

Lower filesystems that only implemented unlocked_ioctl weren't being
passed ioctl calls because eCryptfs only checked for
lower_file->f_op->ioctl and returned -ENOTTY if it was NULL.

eCryptfs shouldn't implement ioctl(), since it doesn't require the BKL.
This patch introduces ecryptfs_unlocked_ioctl() and
ecryptfs_compat_ioctl(), which passes the calls on to the lower file
system.

https://bugs.launchpad.net/ecryptfs/+bug/469664

Reported-by: James Dupin <james.dupin@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ecryptfs/file.c |   56 +++++++++++++++++++++++++++++++++--------------------
 1 file changed, 35 insertions(+), 21 deletions(-)

--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -292,12 +292,40 @@ static int ecryptfs_fasync(int fd, struc
 	return rc;
 }
 
-static int ecryptfs_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg);
+static long
+ecryptfs_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct file *lower_file = NULL;
+	long rc = -ENOTTY;
+
+	if (ecryptfs_file_to_private(file))
+		lower_file = ecryptfs_file_to_lower(file);
+	if (lower_file && lower_file->f_op && lower_file->f_op->unlocked_ioctl)
+		rc = lower_file->f_op->unlocked_ioctl(lower_file, cmd, arg);
+	return rc;
+}
+
+#ifdef CONFIG_COMPAT
+static long
+ecryptfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct file *lower_file = NULL;
+	long rc = -ENOIOCTLCMD;
+
+	if (ecryptfs_file_to_private(file))
+		lower_file = ecryptfs_file_to_lower(file);
+	if (lower_file && lower_file->f_op && lower_file->f_op->compat_ioctl)
+		rc = lower_file->f_op->compat_ioctl(lower_file, cmd, arg);
+	return rc;
+}
+#endif
 
 const struct file_operations ecryptfs_dir_fops = {
 	.readdir = ecryptfs_readdir,
-	.ioctl = ecryptfs_ioctl,
+	.unlocked_ioctl = ecryptfs_unlocked_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = ecryptfs_compat_ioctl,
+#endif
 	.open = ecryptfs_open,
 	.flush = ecryptfs_flush,
 	.release = ecryptfs_release,
@@ -313,7 +341,10 @@ const struct file_operations ecryptfs_ma
 	.write = do_sync_write,
 	.aio_write = generic_file_aio_write,
 	.readdir = ecryptfs_readdir,
-	.ioctl = ecryptfs_ioctl,
+	.unlocked_ioctl = ecryptfs_unlocked_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = ecryptfs_compat_ioctl,
+#endif
 	.mmap = generic_file_mmap,
 	.open = ecryptfs_open,
 	.flush = ecryptfs_flush,
@@ -322,20 +353,3 @@ const struct file_operations ecryptfs_ma
 	.fasync = ecryptfs_fasync,
 	.splice_read = generic_file_splice_read,
 };
-
-static int
-ecryptfs_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	       unsigned long arg)
-{
-	int rc = 0;
-	struct file *lower_file = NULL;
-
-	if (ecryptfs_file_to_private(file))
-		lower_file = ecryptfs_file_to_lower(file);
-	if (lower_file && lower_file->f_op && lower_file->f_op->ioctl)
-		rc = lower_file->f_op->ioctl(ecryptfs_inode_to_lower(inode),
-					     lower_file, cmd, arg);
-	else
-		rc = -ENOTTY;
-	return rc;
-}

[35/67] ecryptfs: release reference to lower mount if interpose fails

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Lino Sanfilippo <LinoSanfilippo@gmx.de>

commit 31f73bee3e170b7cabb35db9e2f4bf7919b9d036 upstream.

In ecryptfs_lookup_and_interpose_lower() the lower mount is not decremented
if allocation of a dentry info struct failed. As a result the lower filesystem
cant be unmounted any more (since it is considered busy). This patch corrects
the reference counting.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ecryptfs/inode.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -264,7 +264,7 @@ int ecryptfs_lookup_and_interpose_lower(
 		printk(KERN_ERR "%s: Out of memory whilst attempting "
 		       "to allocate ecryptfs_dentry_info struct\n",
 			__func__);
-		goto out_dput;
+		goto out_put;
 	}
 	ecryptfs_set_dentry_lower(ecryptfs_dentry, lower_dentry);
 	ecryptfs_set_dentry_lower_mnt(ecryptfs_dentry, lower_mnt);
@@ -339,8 +339,9 @@ int ecryptfs_lookup_and_interpose_lower(
 out_free_kmem:
 	kmem_cache_free(ecryptfs_header_cache_2, page_virt);
 	goto out;
-out_dput:
+out_put:
 	dput(lower_dentry);
+	mntput(lower_mnt);
 	d_drop(ecryptfs_dentry);
 out:
 	return rc;

[36/67] fs/ecryptfs/file.c: introduce missing free

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Julia Lawall <julia@diku.dk>

commit ceeab92971e8af05c1e81a4ff2c271124b55bb9b upstream.

The comments in the code indicate that file_info should be released if the
function fails.  This releasing is done at the label out_free, not out.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = kmem_cache_zalloc(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return <+...x...+>;
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmem_cache_zalloc %s" % (p1[0].file,p1[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ecryptfs/file.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -199,7 +199,7 @@ static int ecryptfs_open(struct inode *i
 			       "the persistent file for the dentry with name "
 			       "[%s]; rc = [%d]\n", __func__,
 			       ecryptfs_dentry->d_name.name, rc);
-			goto out;
+			goto out_free;
 		}
 	}
 	if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
@@ -207,7 +207,7 @@ static int ecryptfs_open(struct inode *i
 		rc = -EPERM;
 		printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
 		       "file must hence be opened RO\n", __func__);
-		goto out;
+		goto out_free;
 	}
 	ecryptfs_set_file_lower(
 		file, ecryptfs_inode_to_private(inode)->lower_file);

[37/67] drbd: Initialize all members of sync_conf to their defaults [Bugz 315]

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Philipp Reisner <philipp.reisner@linbit.com>

commit 85f4cc17a62c3ac9edeaf120cdae7261df458053 upstream.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/block/drbd/drbd_main.c |   21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2660,9 +2660,24 @@ static void drbd_unplug_fn(struct reques
 
 static void drbd_set_defaults(struct drbd_conf *mdev)
 {
-	mdev->sync_conf.after      = DRBD_AFTER_DEF;
-	mdev->sync_conf.rate       = DRBD_RATE_DEF;
-	mdev->sync_conf.al_extents = DRBD_AL_EXTENTS_DEF;
+	/* This way we get a compile error when sync_conf grows,
+	   and we forgot to initialize it here */
+	mdev->sync_conf = (struct syncer_conf) {
+		/* .rate = */		DRBD_RATE_DEF,
+		/* .after = */		DRBD_AFTER_DEF,
+		/* .al_extents = */	DRBD_AL_EXTENTS_DEF,
+		/* .dp_volume = */	DRBD_DP_VOLUME_DEF,
+		/* .dp_interval = */	DRBD_DP_INTERVAL_DEF,
+		/* .throttle_th = */	DRBD_RS_THROTTLE_TH_DEF,
+		/* .hold_off_th = */	DRBD_RS_HOLD_OFF_TH_DEF,
+		/* .verify_alg = */	{}, 0,
+		/* .cpu_mask = */	{}, 0,
+		/* .csums_alg = */	{}, 0,
+		/* .use_rle = */	0
+	};
+
+	/* Have to use that way, because the layout differs between
+	   big endian and little endian */
 	mdev->state = (union drbd_state) {
 		{ .role = R_SECONDARY,
 		  .peer = R_UNKNOWN,

[38/67] drbd: Disable delay probes for the upcomming release

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Philipp Reisner <philipp.reisner@linbit.com>

commit 6710a5760355be8f2e51682f41b0d3fc76550309 upstream.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/block/drbd/drbd_main.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2371,11 +2371,7 @@ static int _drbd_send_zc_ee(struct drbd_
 
 static void consider_delay_probes(struct drbd_conf *mdev)
 {
-	if (mdev->state.conn != C_SYNC_SOURCE || mdev->agreed_pro_version < 93)
-		return;
-
-	if (mdev->dp_volume_last + mdev->sync_conf.dp_volume * 2 < mdev->send_cnt)
-		drbd_send_delay_probes(mdev);
+	return;
 }
 
 static int w_delay_probes(struct drbd_conf *mdev, struct drbd_work *w, int cancel)

Re: [Stable-review] [38/67] drbd: Disable delay probes for the upcomming release

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 874 bytes --]

On Wed, 2010-08-11 at 17:05 -0700, Greg KH wrote:
> 2.6.35-stable review patch.  If anyone has any objections, please let us know.
> 
> ------------------
> 
> From: Philipp Reisner <philipp.reisner@linbit.com>
> 
> commit 6710a5760355be8f2e51682f41b0d3fc76550309 upstream.
> 
> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[...]

Anyone want to explain why this is important?

Similarly "drbd: Initialize all members of sync_conf to their defaults
[Bugz 315]"; I assume that some Bugzilla entry would tell me, only I
have no idea where it is.

These commit messages *suck*.

Ben

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [Stable-review] [38/67] drbd: Disable delay probes for the upcomming release

[Lars Ellenberg]

On Thu, Aug 12, 2010 at 04:15:02AM +0100, Ben Hutchings wrote:
> On Wed, 2010-08-11 at 17:05 -0700, Greg KH wrote:
> > 2.6.35-stable review patch.  If anyone has any objections, please let us know.
> > 
> > ------------------
> > 
> > From: Philipp Reisner <philipp.reisner@linbit.com>
> > 
> > commit 6710a5760355be8f2e51682f41b0d3fc76550309 upstream.
> > 
> > Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
> > Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
> > Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> [...]
> 
> Anyone want to explain why this is important?

The receiving side implementation of this "delay probe" feature
has potential to stall the DRBD resync process under certain ill
circumstances.  Thus we rather not send the delay probes in the first
place.  The feature has been reverted upstream, and is being replaced.

> Similarly "drbd: Initialize all members of sync_conf to their defaults
> [Bugz 315]"; I assume that some Bugzilla entry would tell me, only I
> have no idea where it is.

If it so happened that these defaults have not been set, and no explicit
value assigned either, and then later a delay probe is received (which,
if no one sends one, can no longer be the case), it could lead to a
division by zero in kernel space :(

You'd have to misuse drbd userland to get there, but you could.

> These commit messages *suck*.

We'll try to make them suck less.

	Lars

[39/67] bio, fs: update RWA_MASK, READA and SWRITE to match the corresponding BIO_RW_* bits

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tejun Heo <tj@kernel.org>

commit aca27ba9618276dd2f777bcd5a1419589ccf1ca8 upstream.

Commit a82afdf (block: use the same failfast bits for bio and request)
moved BIO_RW_* bits around such that they match up with REQ_* bits.
Unfortunately, fs.h hard coded RW_MASK, RWA_MASK, READ, WRITE, READA
and SWRITE as 0, 1, 2 and 3, and expected them to match with BIO_RW_*
bits.  READ/WRITE didn't change but BIO_RW_AHEAD was moved to bit 4
instead of bit 1, breaking RWA_MASK, READA and SWRITE.

This patch updates RWA_MASK, READA and SWRITE such that they match the
BIO_RW_* bits again.  A follow up patch will update the definitions to
directly use BIO_RW_* bits so that this kind of breakage won't happen
again.

Neil also spotted missing RWA_MASK conversion.

Stable: The offending commit a82afdf was released with v2.6.32, so
this patch should be applied to all kernels since then but it must
_NOT_ be applied to kernels earlier than that.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Vladislav Bolkhovitin <vst@vlnb.net>
Root-caused-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/fs.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -145,11 +145,11 @@ struct inodes_stat_t {
  *
  */
 #define RW_MASK		1
-#define RWA_MASK	2
+#define RWA_MASK		16
 #define READ 0
 #define WRITE 1
-#define READA 2		/* read-ahead  - don't block if no resources */
-#define SWRITE 3	/* for ll_rw_block() - wait for buffer lock */
+#define READA			16 /* readahead - don't block if no resources */
+#define SWRITE			17 /* for ll_rw_block(), wait for buffer lock */
 #define READ_SYNC	(READ | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
 #define READ_META	(READ | (1 << BIO_RW_META))
 #define WRITE_SYNC_PLUG	(WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))

[40/67] signalfd: fill in ssi_int for posix timers and message queues

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Nathan Lynch <ntl@pobox.com>

commit a2a20c412c86e0bb46a9ab0dd31bcfe6d201b913 upstream.

If signalfd is used to consume a signal generated by a POSIX interval
timer or POSIX message queue, the ssi_int field does not reflect the data
(sigevent->sigev_value) supplied to timer_create(2) or mq_notify(3).  (The
ssi_ptr field, however, is filled in.)

This behavior differs from signalfd's treatment of sigqueue-generated
signals -- see the default case in signalfd_copyinfo.  It also gives
results that differ from the case when a signal is handled conventionally
via a sigaction-registered handler.

So, set signalfd_siginfo->ssi_int in the remaining cases (__SI_TIMER,
__SI_MESGQ) where ssi_ptr is set.

akpm: a non-back-compatible change.  Merge into -stable to minimise the
number of kernels which are in the field and which miss this feature.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/signalfd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -88,6 +88,7 @@ static int signalfd_copyinfo(struct sign
 		 err |= __put_user(kinfo->si_tid, &uinfo->ssi_tid);
 		 err |= __put_user(kinfo->si_overrun, &uinfo->ssi_overrun);
 		 err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
+		 err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
 		break;
 	case __SI_POLL:
 		err |= __put_user(kinfo->si_band, &uinfo->ssi_band);
@@ -111,6 +112,7 @@ static int signalfd_copyinfo(struct sign
 		err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
 		err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
 		err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
+		err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
 		break;
 	default:
 		/*

[41/67] [ARM] pxa/cm-x300: fix ffuart registration

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Igor Grinberg <grinberg@compulab.co.il>

commit a6cd7eb374647b572ae9e7dbfe49871e6996e8e0 upstream.

ffuart is available on cm-x300 only with pxa300.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/arm/mach-pxa/cm-x300.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -745,9 +745,10 @@ static void __init cm_x300_init(void)
 {
 	cm_x300_init_mfp();
 
-	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
+	if (cpu_is_pxa300())
+		pxa_set_ffuart_info(NULL);
 
 	cm_x300_init_da9030();
 	cm_x300_init_dm9000();

[42/67] smsc911x: Add spinlocks around registers access

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Catalin Marinas <catalin.marinas@arm.com>

commit 492c5d943d6a04b124ba3a719dc746dc36b14cfb upstream.

On SMP systems, the SMSC911x registers may be accessed by multiple CPUs
and this seems to put the chip in an inconsistent state. The patch adds
spinlocks to the smsc911x_reg_read, smsc911x_reg_write,
smsc911x_rx_readfifo and smsc911x_tx_writefifo functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/smsc911x.c |   92 +++++++++++++++++++++++++++----------------------
 1 file changed, 52 insertions(+), 40 deletions(-)

--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -84,8 +84,7 @@ struct smsc911x_data {
 	 */
 	spinlock_t mac_lock;
 
-	/* spinlock to ensure 16-bit accesses are serialised.
-	 * unused with a 32-bit bus */
+	/* spinlock to ensure register accesses are serialised */
 	spinlock_t dev_lock;
 
 	struct phy_device *phy_dev;
@@ -118,37 +117,33 @@ struct smsc911x_data {
 	unsigned int hashlo;
 };
 
-/* The 16-bit access functions are significantly slower, due to the locking
- * necessary.  If your bus hardware can be configured to do this for you
- * (in response to a single 32-bit operation from software), you should use
- * the 32-bit access functions instead. */
-
-static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
+static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 {
 	if (pdata->config.flags & SMSC911X_USE_32BIT)
 		return readl(pdata->ioaddr + reg);
 
-	if (pdata->config.flags & SMSC911X_USE_16BIT) {
-		u32 data;
-		unsigned long flags;
-
-		/* these two 16-bit reads must be performed consecutively, so
-		 * must not be interrupted by our own ISR (which would start
-		 * another read operation) */
-		spin_lock_irqsave(&pdata->dev_lock, flags);
-		data = ((readw(pdata->ioaddr + reg) & 0xFFFF) |
+	if (pdata->config.flags & SMSC911X_USE_16BIT)
+		return ((readw(pdata->ioaddr + reg) & 0xFFFF) |
 			((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16));
-		spin_unlock_irqrestore(&pdata->dev_lock, flags);
-
-		return data;
-	}
 
 	BUG();
 	return 0;
 }
 
-static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
-				      u32 val)
+static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
+{
+	u32 data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+	data = __smsc911x_reg_read(pdata, reg);
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
+
+	return data;
+}
+
+static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
+					u32 val)
 {
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
 		writel(val, pdata->ioaddr + reg);
@@ -156,44 +151,54 @@ static inline void smsc911x_reg_write(st
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
-		unsigned long flags;
-
-		/* these two 16-bit writes must be performed consecutively, so
-		 * must not be interrupted by our own ISR (which would start
-		 * another read operation) */
-		spin_lock_irqsave(&pdata->dev_lock, flags);
 		writew(val & 0xFFFF, pdata->ioaddr + reg);
 		writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2);
-		spin_unlock_irqrestore(&pdata->dev_lock, flags);
 		return;
 	}
 
 	BUG();
 }
 
+static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
+				      u32 val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+	__smsc911x_reg_write(pdata, reg, val);
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
+}
+
 /* Writes a packet to the TX_DATA_FIFO */
 static inline void
 smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
 		      unsigned int wordcount)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+
 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
 		while (wordcount--)
-			smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++));
-		return;
+			__smsc911x_reg_write(pdata, TX_DATA_FIFO,
+					     swab32(*buf++));
+		goto out;
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
 		writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
-		return;
+		goto out;
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
 		while (wordcount--)
-			smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++);
-		return;
+			__smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++);
+		goto out;
 	}
 
 	BUG();
+out:
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
 /* Reads a packet out of the RX_DATA_FIFO */
@@ -201,24 +206,31 @@ static inline void
 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
 		     unsigned int wordcount)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+
 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
 		while (wordcount--)
-			*buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO));
-		return;
+			*buf++ = swab32(__smsc911x_reg_read(pdata,
+							    RX_DATA_FIFO));
+		goto out;
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
 		readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
-		return;
+		goto out;
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
 		while (wordcount--)
-			*buf++ = smsc911x_reg_read(pdata, RX_DATA_FIFO);
-		return;
+			*buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO);
+		goto out;
 	}
 
 	BUG();
+out:
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
 /* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read

[43/67] ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit cdf357f1e13a08a11261edacb3083746f65c1ed9 upstream.

On versions of the Cortex-A9 prior to r2p0, performing TLB invalidations by
ASID match can result in the incorrect ASID being broadcast to other CPUs.
As a consequence of this, the targetted TLB entries are not invalidated
across the system.

This workaround changes the TLB flushing routines to invalidate entries
regardless of the ASID.

Tested-by: Rob Clark <rob@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/arm/Kconfig                |   12 ++++++++++++
 arch/arm/include/asm/tlbflush.h |    8 ++++++++
 2 files changed, 20 insertions(+)

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1027,6 +1027,18 @@ config PL310_ERRATA_588369
 	   is not correctly implemented in PL310 as clean lines are not
 	   invalidated as a result of these operations. Note that this errata
 	   uses Texas Instrument's secure monitor api.
+
+config ARM_ERRATA_720789
+	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 720789 Cortex-A9 (prior to
+	  r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
+	  broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
+	  As a consequence of this erratum, some TLB entries which should be
+	  invalidated are not, resulting in an incoherency in the system page
+	  tables. The workaround changes the TLB flushing routines to invalidate
+	  entries regardless of the ASID.
 endmenu
 
 source "arch/arm/common/Kconfig"
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -378,7 +378,11 @@ static inline void local_flush_tlb_mm(st
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V7_UIS_ASID))
+#ifdef CONFIG_ARM_ERRATA_720789
+		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
+#else
 		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
+#endif
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -424,7 +428,11 @@ local_flush_tlb_page(struct vm_area_stru
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V7_UIS_PAGE))
+#ifdef CONFIG_ARM_ERRATA_720789
+		asm("mcr p15, 0, %0, c8, c3, 3" : : "r" (uaddr & PAGE_MASK) : "cc");
+#else
 		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
+#endif
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */

[44/67] ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h>

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1097 bytes --]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

commit 868003ca7ad17ac6c1606dc36101f10a7825b399 upstream.

This is a follow up to

	14cb0de (arm/imx/gpio: add spinlock protection)

and fixes the following build failure:

	  CC      arch/arm/mach-imx/pcm970-baseboard.o
	In file included from arch/arm/include/asm/gpio.h:6,
			 from include/linux/gpio.h:8,
			 from arch/arm/mach-imx/pcm970-baseboard.c:20:
	arch/arm/plat-mxc/include/mach/gpio.h:40: error: expected specifier-qualifier-list before 'spinlock_t'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

---
 arch/arm/plat-mxc/include/mach/gpio.h |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -19,6 +19,7 @@
 #ifndef __ASM_ARCH_MXC_GPIO_H__
 #define __ASM_ARCH_MXC_GPIO_H__
 
+#include <linux/spinlock.h>
 #include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 

[45/67] USB: musb: use correct register widths in register dumps

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Anand Gadiyar <gadiyar@ti.com>

commit 0936fb5e92a90476959447ad8ae5d780afbbd930 upstream.

DMA_ADDR and DMA_COUNT are 32-bit registers, not 16-bit.

Marking them as 16-bit in the table causes only the lower
16-bits to be dumped and this is misleading.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/musb/musb_debugfs.c |   32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -92,29 +92,29 @@ static const struct musb_register_map mu
 	{ "LS_EOF1",		0x7E,	8 },
 	{ "SOFT_RST",		0x7F,	8 },
 	{ "DMA_CNTLch0",	0x204,	16 },
-	{ "DMA_ADDRch0",	0x208,	16 },
-	{ "DMA_COUNTch0",	0x20C,	16 },
+	{ "DMA_ADDRch0",	0x208,	32 },
+	{ "DMA_COUNTch0",	0x20C,	32 },
 	{ "DMA_CNTLch1",	0x214,	16 },
-	{ "DMA_ADDRch1",	0x218,	16 },
-	{ "DMA_COUNTch1",	0x21C,	16 },
+	{ "DMA_ADDRch1",	0x218,	32 },
+	{ "DMA_COUNTch1",	0x21C,	32 },
 	{ "DMA_CNTLch2",	0x224,	16 },
-	{ "DMA_ADDRch2",	0x228,	16 },
-	{ "DMA_COUNTch2",	0x22C,	16 },
+	{ "DMA_ADDRch2",	0x228,	32 },
+	{ "DMA_COUNTch2",	0x22C,	32 },
 	{ "DMA_CNTLch3",	0x234,	16 },
-	{ "DMA_ADDRch3",	0x238,	16 },
-	{ "DMA_COUNTch3",	0x23C,	16 },
+	{ "DMA_ADDRch3",	0x238,	32 },
+	{ "DMA_COUNTch3",	0x23C,	32 },
 	{ "DMA_CNTLch4",	0x244,	16 },
-	{ "DMA_ADDRch4",	0x248,	16 },
-	{ "DMA_COUNTch4",	0x24C,	16 },
+	{ "DMA_ADDRch4",	0x248,	32 },
+	{ "DMA_COUNTch4",	0x24C,	32 },
 	{ "DMA_CNTLch5",	0x254,	16 },
-	{ "DMA_ADDRch5",	0x258,	16 },
-	{ "DMA_COUNTch5",	0x25C,	16 },
+	{ "DMA_ADDRch5",	0x258,	32 },
+	{ "DMA_COUNTch5",	0x25C,	32 },
 	{ "DMA_CNTLch6",	0x264,	16 },
-	{ "DMA_ADDRch6",	0x268,	16 },
-	{ "DMA_COUNTch6",	0x26C,	16 },
+	{ "DMA_ADDRch6",	0x268,	32 },
+	{ "DMA_COUNTch6",	0x26C,	32 },
 	{ "DMA_CNTLch7",	0x274,	16 },
-	{ "DMA_ADDRch7",	0x278,	16 },
-	{ "DMA_COUNTch7",	0x27C,	16 },
+	{ "DMA_ADDRch7",	0x278,	32 },
+	{ "DMA_COUNTch7",	0x27C,	32 },
 	{  }	/* Terminating Entry */
 };
 

[46/67] USB: EHCI: remove PCI assumption

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit ae68a83bdc1971cb02fefc7a686ba6d077065e71 upstream.

This patch (as1405) fixes a small bug in ehci-hcd's isochronous
scheduler.  Not all EHCI controllers are PCI, and the code shouldn't
assume that they are.  Instead, introduce a special flag for
controllers which need to delay iso scheduling for full-speed devices
beyond the scheduling threshold.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
CC: David Brownell <david-b@pacbell.net>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/host/ehci-pci.c   |    1 +
 drivers/usb/host/ehci-sched.c |   10 ++++------
 drivers/usb/host/ehci.h       |    1 +
 3 files changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -114,6 +114,7 @@ static int ehci_pci_setup(struct usb_hcd
 		break;
 	case PCI_VENDOR_ID_INTEL:
 		ehci->need_io_watchdog = 0;
+		ehci->fs_i_thresh = 1;
 		if (pdev->device == 0x27cc) {
 			ehci->broken_periodic = 1;
 			ehci_info(ehci, "using broken periodic workaround\n");
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1400,7 +1400,6 @@ iso_stream_schedule (
 	int			status;
 	unsigned		mod = ehci->periodic_size << 3;
 	struct ehci_iso_sched	*sched = urb->hcpriv;
-	struct pci_dev		*pdev;
 
 	if (sched->span > (mod - SCHEDULE_SLOP)) {
 		ehci_dbg (ehci, "iso request %p too long\n", urb);
@@ -1427,15 +1426,14 @@ iso_stream_schedule (
 	 * slot in the schedule, implicitly assuming URB_ISO_ASAP.
 	 */
 	if (likely (!list_empty (&stream->td_list))) {
-		pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
 		start = stream->next_uframe;
 
 		/* For high speed devices, allow scheduling within the
-		 * isochronous scheduling threshold.  For full speed devices,
-		 * don't. (Work around for Intel ICH9 bug.)
+		 * isochronous scheduling threshold.  For full speed devices
+		 * and Intel PCI-based controllers, don't (work around for
+		 * Intel ICH9 bug).
 		 */
-		if (!stream->highspeed &&
-				pdev->vendor == PCI_VENDOR_ID_INTEL)
+		if (!stream->highspeed && ehci->fs_i_thresh)
 			next = now + ehci->i_thresh;
 		else
 			next = now;
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -130,6 +130,7 @@ struct ehci_hcd {			/* one per controlle
 	unsigned		has_amcc_usb23:1;
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
+	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)

[47/67] USB: resizing usbmon binary interface buffer causes protection faults

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Steven Robertson <steven@strobe.cc>

commit 33d973ad88ceb83ed1449592b7574b5b5bb33ac6 upstream.

Enlarging the buffer size via the MON_IOCT_RING_SIZE ioctl causes
general protection faults. It appears the culprit is an incorrect
argument to mon_free_buff: instead of passing the size of the current
buffer being freed, the size of the new buffer is passed.

Use the correct size argument to mon_free_buff when changing the size of
the buffer.

Signed-off-by: Steven Robertson <steven@strobe.cc>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/mon/mon_bin.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1009,7 +1009,7 @@ static int mon_bin_ioctl(struct file *fi
 
 		mutex_lock(&rp->fetch_lock);
 		spin_lock_irqsave(&rp->b_lock, flags);
-		mon_free_buff(rp->b_vec, size/CHUNK_SIZE);
+		mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE);
 		kfree(rp->b_vec);
 		rp->b_vec  = vec;
 		rp->b_size = size;

[48/67] USB delay init quirk for logitech Harmony 700-series devices

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Phil Dibowitz <phil@ipom.com>

commit 93362a875fc69881ae69299efaf19a55a1f57db0 upstream.

The Logitech Harmony 700 series needs an extra delay during
initialization.  This patch adds a USB quirk which enables such a delay
and adds the device to the quirks list.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/core/hub.c     |    6 +++++-
 drivers/usb/core/quirks.c  |    3 +++
 include/linux/usb/quirks.h |    4 ++++
 3 files changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -20,6 +20,7 @@
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
@@ -1801,7 +1802,6 @@ int usb_new_device(struct usb_device *ud
 	pm_runtime_set_active(&udev->dev);
 	pm_runtime_enable(&udev->dev);
 
-	usb_detect_quirks(udev);
 	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;
@@ -3111,6 +3111,10 @@ static void hub_port_connect_change(stru
 		if (status < 0)
 			goto loop;
 
+		usb_detect_quirks(udev);
+		if (udev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(1000);
+
 		/* consecutive bus-powered hubs aren't reliable; they can
 		 * violate the voltage drop budget.  if the new child has
 		 * a "powered" LED, users should notice we didn't enable it
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -38,6 +38,9 @@ static const struct usb_device_id usb_qu
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Harmony 700-series */
+	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -26,4 +26,8 @@
    and can't handle talking to these interfaces */
 #define USB_QUIRK_HONOR_BNUMINTERFACES	0x00000020
 
+/* device needs a pause during initialization, after we read the device
+   descriptor */
+#define USB_QUIRK_DELAY_INIT		0x00000040
+
 #endif /* __LINUX_USB_QUIRKS_H */

[49/67] USB: serial: enabling support for Segway RMP in ftdi_sio

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: John G. Rogers <jgrogers@gmail.com>

commit afad19648f70c6493193e0a774bd754b7790b4a0 upstream.

I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will
enable support for the Segway Robotic Mobility Platform (RMP200) in the
ftdi_sio kernel module.  Currently, users of the Segway RMP200 must use
a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a
udev rule to get the ftdi_sio module to handle the usb interface and
mount it on /dev/ttyXXX.  This is not a good solution because some users
will have multiple USB to Serial converters which will use the ftdi_sio
module.

Signed-off-by: John Rogers <jgrogers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    5 +++++
 2 files changed, 6 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -746,6 +746,7 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1032,3 +1032,8 @@
 #define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
 #define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
 
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID	0xe729

[50/67] USB: option: Huawei ETS 1220 support added

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Pavel Kazlou <p.i.kazlou@gmail.com>

commit b972302b0a13aaddc9e90da2b4b52722e5d0e776 upstream.

The patch adds Huawei ETS 1220 product id into the list of supported
devices in 'option' usb serial driver.

Signed-off-by: Pavel Kazlou <p.i.kazlou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -146,6 +146,7 @@ static void option_instat_callback(struc
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
 #define HUAWEI_PRODUCT_E14AC			0x14AC
+#define HUAWEI_PRODUCT_ETS1220			0x1803
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -482,6 +483,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */

[51/67] USB: option: add huawei k3765 k4505 devices to work properly

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Andrew Bird <ajb@spheresystems.co.uk>

commit 0372a754be9aa43e19fd86c9bc04796d43b55e38 upstream.

This patch adds the product IDs of Huawei's K3765 and K4505 mobile
broadband usb modems to option.c. It also adds a quirk to the option
probe function so that binding to the device's network interface(class
0xff) is avoided. This is necessary to allow another driver to bind to
that, and to avoid programs like wvdial opening a nonfunctioning tty
during modem discovery.

Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/option.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -145,6 +145,8 @@ static void option_instat_callback(struc
 #define HUAWEI_PRODUCT_E143D			0x143D
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
+#define HUAWEI_PRODUCT_K4505			0x1464
+#define HUAWEI_PRODUCT_K3765			0x1465
 #define HUAWEI_PRODUCT_E14AC			0x14AC
 #define HUAWEI_PRODUCT_ETS1220			0x1803
 
@@ -483,6 +485,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
@@ -1019,6 +1023,13 @@ static int option_probe(struct usb_seria
 		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
 		return -ENODEV;
 
+	/* Don't bind network interfaces on Huawei K3765 & K4505 */
+	if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
+		(serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
+			serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) &&
+		serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+		return -ENODEV;
+
 	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 
 	if (!data)

[52/67] USB: ftdi_sio: device id for Navitator

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: dranch@trinnet.net <dranch@trinnet.net>

commit b6180ef7c99574c3350bbffa2a3a9d675321543d upstream.

This patch is to add a US Interface, Inc. "Navigator" USB device.
Specifically, it's a HAM Radio USB sound modem that also
incorporates three pairs of unique FTDI serial ports.  The standard
Linux FTDI serial driver will only recognize the first two serial
ports of an unknown FDTI derived device and this patch adds in
recognition to these specific new IDs.

Signed-off-by: David A. Ranch <dranch@trinnet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/ftdi_sio.c     |    3 +++
 drivers/usb/serial/ftdi_sio_ids.h |    5 +++++
 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -157,6 +157,9 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -40,6 +40,11 @@
 
 #define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
 
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID	0xb810	/* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID	0xb811	/* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID	0xb812	/* Navigator RS232 and CONFIG lines */
+
 /* OOCDlink by Joern Kaipf <joernk@web.de>
  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */

[53/67] USB: cp210x: Add four new device IDs

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Alessio Igor Bogani <abogani@texware.it>

commit 356c5a4834a74c621715f7a7f16ded914eecbd3c upstream.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/cp210x.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -126,6 +126,10 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
+	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
 	{ } /* Terminating Entry */
 };
 

[54/67] USB: usbtest: avoid to free coherent buffer in atomic context

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ming Lei <tom.leiming@gmail.com>

commit e10e1bec8e6654de4591ef45ddd6a6d1e5b2591c upstream.

This patch fixes the warning below:
[30753.755998] ------------[ cut here ]------------
[30753.755998] WARNING: at /home/tom/git/linux-2.6/linux-2.6-next/arch/x86/include/asm/dma-mapping.h:155 hcd_buffer_free+0xb1/0xd4 [usbcore]()
[30753.755998] Hardware name: 6475EK2
[30753.755998] Modules linked in: uvcvideo ehci_hcd usbtest cdc_ether usbnet vfat fat usb_storage nfsd lockd nfs_acl auth_rpcgss exportfs mii tun videodev v4l1_compat v4l2_compat_ioctl32 fuse bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf kvm_intel kvm arc4 ecb ath5k usbhid mac80211 snd_hda_codec_conexant ch341 usbserial ath cfg80211 thinkpad_acpi snd_hda_intel pcspkr wmi hwmon yenta_socket iTCO_wdt iTCO_vendor_support i2c_i801 e1000e snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc pata_acpi uhci_hcd ohci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: uvcvideo]
[30753.755998] Pid: 0, comm: swapper Tainted: G        W   2.6.35-rc6-gkh-wl+ #49
[30753.755998] Call Trace:
[30753.755998]  <IRQ>  [<ffffffff8104478a>] warn_slowpath_common+0x80/0x98
[30753.755998]  [<ffffffff810447b7>] warn_slowpath_null+0x15/0x17
[30753.755998]  [<ffffffffa00ce02d>] hcd_buffer_free+0xb1/0xd4 [usbcore]
[30753.755998]  [<ffffffffa00c1345>] usb_free_coherent+0x1c/0x1e [usbcore]
[30753.755998]  [<ffffffffa00b13e4>] simple_free_urb+0x23/0x2f [usbtest]
[30753.755998]  [<ffffffffa00b210b>] iso_callback+0xbb/0x10f [usbtest]
[30753.755998]  [<ffffffffa00c7390>] usb_hcd_giveback_urb+0x8c/0xc0 [usbcore]
[30753.755998]  [<ffffffffa0449b35>] ehci_urb_done+0x84/0x95 [ehci_hcd]
[30753.755998]  [<ffffffffa044b5a5>] ehci_work+0x41a/0x7dd [ehci_hcd]
[30753.755998]  [<ffffffffa044e298>] ehci_irq+0x33b/0x370 [ehci_hcd]
[30753.755998]  [<ffffffff8100fb05>] ? sched_clock+0x9/0xd
[30753.755998]  [<ffffffff8105e641>] ? sched_clock_local+0x1c/0x82
[30753.755998]  [<ffffffff8105e76a>] ? sched_clock_cpu+0xc3/0xce
[30753.755998]  [<ffffffff81067c7e>] ? trace_hardirqs_off+0xd/0xf
[30753.755998]  [<ffffffff8105e7b8>] ? cpu_clock+0x43/0x5e
[30753.755998]  [<ffffffffa00c6999>] usb_hcd_irq+0x45/0xa1 [usbcore]
[30753.755998]  [<ffffffff81092e02>] handle_IRQ_event+0x20/0xa5
[30753.755998]  [<ffffffff81094cea>] handle_fasteoi_irq+0x92/0xd2
[30753.755998]  [<ffffffff8100c0ed>] handle_irq+0x1f/0x2a
[30753.755998]  [<ffffffff8100b75d>] do_IRQ+0x57/0xbe
[30753.755998]  [<ffffffff8136a693>] ret_from_intr+0x0/0x16
[30753.755998]  <EOI>  [<ffffffff81223baa>] ? acpi_idle_enter_bm+0x231/0x269
[30753.755998]  [<ffffffff81223ba3>] ? acpi_idle_enter_bm+0x22a/0x269
[30753.755998]  [<ffffffff812c4b6b>] cpuidle_idle_call+0x99/0xce
[30753.755998]  [<ffffffff81008dd5>] cpu_idle+0x61/0xaa
[30753.755998]  [<ffffffff8136374b>] start_secondary+0x1c2/0x1c6
[30753.755998] ---[ end trace 904cfaf7ab4cb1a2 ]---

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/misc/usbtest.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1378,7 +1378,6 @@ static void iso_callback (struct urb *ur
 			break;
 		}
 	}
-	simple_free_urb (urb);
 
 	ctx->pending--;
 	if (ctx->pending == 0) {
@@ -1495,6 +1494,7 @@ test_iso_queue (struct usbtest_dev *dev,
 			}
 
 			simple_free_urb (urbs [i]);
+			urbs[i] = NULL;
 			context.pending--;
 			context.submit_error = 1;
 			break;
@@ -1504,6 +1504,10 @@ test_iso_queue (struct usbtest_dev *dev,
 
 	wait_for_completion (&context.done);
 
+	for (i = 0; i < param->sglen; i++) {
+		if (urbs[i])
+			simple_free_urb(urbs[i]);
+	}
 	/*
 	 * Isochronous transfers are expected to fail sometimes.  As an
 	 * arbitrary limit, we will report an error if any submissions

[55/67] USB: fix thread-unsafe anchor utiliy routines

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Christian Lamparter <chunkeey@googlemail.com>

commit b3e670443b7fb8a2d29831b62b44a039c283e351 upstream.

This patch fixes a race condition in two utility routines
related to the removal/unlinking of urbs from an anchor.

If two threads are concurrently accessing the same anchor,
both could end up with the same urb - thinking they are
the exclusive owner.

Alan Stern pointed out a related issue in
usb_unlink_anchored_urbs:

"The URB isn't removed from the anchor until it completes
 (as a by-product of completion, in fact), which might not
 be for quite some time after the unlink call returns.
 In the meantime, the subroutine will keep trying to unlink
 it, over and over again."

Cc: Oliver Neukum <oneukum@suse.de>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/core/urb.c |   50 ++++++++++++++++++++-----------------------------
 1 file changed, 21 insertions(+), 29 deletions(-)

--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -137,6 +137,16 @@ void usb_anchor_urb(struct urb *urb, str
 }
 EXPORT_SYMBOL_GPL(usb_anchor_urb);
 
+/* Callers must hold anchor->lock */
+static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+	urb->anchor = NULL;
+	list_del(&urb->anchor_list);
+	usb_put_urb(urb);
+	if (list_empty(&anchor->urb_list))
+		wake_up(&anchor->wait);
+}
+
 /**
  * usb_unanchor_urb - unanchors an URB
  * @urb: pointer to the urb to anchor
@@ -156,17 +166,14 @@ void usb_unanchor_urb(struct urb *urb)
 		return;
 
 	spin_lock_irqsave(&anchor->lock, flags);
-	if (unlikely(anchor != urb->anchor)) {
-		/* we've lost the race to another thread */
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		return;
-	}
-	urb->anchor = NULL;
-	list_del(&urb->anchor_list);
+	/*
+	 * At this point, we could be competing with another thread which
+	 * has the same intention. To protect the urb from being unanchored
+	 * twice, only the winner of the race gets the job.
+	 */
+	if (likely(anchor == urb->anchor))
+		__usb_unanchor_urb(urb, anchor);
 	spin_unlock_irqrestore(&anchor->lock, flags);
-	usb_put_urb(urb);
-	if (list_empty(&anchor->urb_list))
-		wake_up(&anchor->wait);
 }
 EXPORT_SYMBOL_GPL(usb_unanchor_urb);
 
@@ -749,20 +756,11 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_
 void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
-	unsigned long flags;
 
-	spin_lock_irqsave(&anchor->lock, flags);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		usb_get_urb(victim);
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		/* this will unanchor the URB */
+	while ((victim = usb_get_from_anchor(anchor)) != NULL) {
 		usb_unlink_urb(victim);
 		usb_put_urb(victim);
-		spin_lock_irqsave(&anchor->lock, flags);
 	}
-	spin_unlock_irqrestore(&anchor->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
 
@@ -799,12 +797,11 @@ struct urb *usb_get_from_anchor(struct u
 		victim = list_entry(anchor->urb_list.next, struct urb,
 				    anchor_list);
 		usb_get_urb(victim);
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		usb_unanchor_urb(victim);
+		__usb_unanchor_urb(victim, anchor);
 	} else {
-		spin_unlock_irqrestore(&anchor->lock, flags);
 		victim = NULL;
 	}
+	spin_unlock_irqrestore(&anchor->lock, flags);
 
 	return victim;
 }
@@ -826,12 +823,7 @@ void usb_scuttle_anchored_urbs(struct us
 	while (!list_empty(&anchor->urb_list)) {
 		victim = list_entry(anchor->urb_list.prev, struct urb,
 				    anchor_list);
-		usb_get_urb(victim);
-		spin_unlock_irqrestore(&anchor->lock, flags);
-		/* this may free the URB */
-		usb_unanchor_urb(victim);
-		usb_put_urb(victim);
-		spin_lock_irqsave(&anchor->lock, flags);
+		__usb_unanchor_urb(victim, anchor);
 	}
 	spin_unlock_irqrestore(&anchor->lock, flags);
 }

[56/67] USB: serial: fix stalled writes

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit b58af4066d240b18b43f202e07b9ec7461d90b17 upstream.

As David VomLehn points out, it was possible to receive an interrupt
before clearing the free-urb flag which could lead to the urb being
incorrectly marked as busy.

For the same reason, move tx_bytes accounting so that it will never be
negative.

Note that the free-flags set and clear operations do not need any
additional locking as they are manipulated while USB_SERIAL_WRITE_BUSY
is set.

Reported-by: David VomLehn <dvomlehn@cisco.com>
Tested-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/generic.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -208,18 +208,23 @@ retry:
 	urb->transfer_buffer_length = count;
 	usb_serial_debug_data(debug, &port->dev, __func__, count,
 						urb->transfer_buffer);
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes += count;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	clear_bit(i, &port->write_urbs_free);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
 		dev_err(&port->dev, "%s - error submitting urb: %d\n",
 						__func__, result);
+		set_bit(i, &port->write_urbs_free);
+		spin_lock_irqsave(&port->lock, flags);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
 		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
 		return result;
 	}
-	clear_bit(i, &port->write_urbs_free);
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->tx_bytes += count;
-	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* Try sending off another urb, unless in irq context (in which case
 	 * there will be no free urb). */

[57/67] Bluetooth: Added support for controller shipped with iMac i5

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Cyril Lacoux <clacoux@ifeelgood.org>

commit 0a79f67445de50ca0a8dc1d34f3cc406d89c28b2 upstream.

Device class is ff(vend.) instead of e0(wlcon).

Output from command `usb-devices`:
T:  Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05ac ProdID=8215 Rev=01.82
S:  Manufacturer=Apple Inc.
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=7C6D62936607
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

Signed-off-by: Cyril Lacoux <clacoux@ifeelgood.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/bluetooth/btusb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -59,6 +59,9 @@ static struct usb_device_id btusb_table[
 	/* Generic Bluetooth USB device */
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
 
+	/* Apple iMac11,1 */
+	{ USB_DEVICE(0x05ac, 0x8215) },
+
 	/* AVM BlueFRITZ! USB v2.0 */
 	{ USB_DEVICE(0x057c, 0x3800) },
 

[58/67] sched: Revert nohz_ratelimit() for now

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Peter Zijlstra <a.p.zijlstra@chello.nl>

commit 396e894d289d69bacf5acd983c97cd6e21a14c08 upstream.

Norbert reported that nohz_ratelimit() causes his laptop to burn about
4W (40%) extra. For now back out the change and see if we can adjust
the power management code to make better decisions.

Reported-by: Norbert Preining <preining@logic.at>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/sched.h    |    6 ------
 kernel/sched.c           |   10 ----------
 kernel/time/tick-sched.c |    2 +-
 3 files changed, 1 insertion(+), 17 deletions(-)

--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -274,17 +274,11 @@ extern cpumask_var_t nohz_cpu_mask;
 #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
 extern int select_nohz_load_balancer(int cpu);
 extern int get_nohz_load_balancer(void);
-extern int nohz_ratelimit(int cpu);
 #else
 static inline int select_nohz_load_balancer(int cpu)
 {
 	return 0;
 }
-
-static inline int nohz_ratelimit(int cpu)
-{
-	return 0;
-}
 #endif
 
 /*
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1232,16 +1232,6 @@ void wake_up_idle_cpu(int cpu)
 		smp_send_reschedule(cpu);
 }
 
-int nohz_ratelimit(int cpu)
-{
-	struct rq *rq = cpu_rq(cpu);
-	u64 diff = rq->clock - rq->nohz_stamp;
-
-	rq->nohz_stamp = rq->clock;
-
-	return diff < (NSEC_PER_SEC / HZ) >> 1;
-}
-
 #endif /* CONFIG_NO_HZ */
 
 static u64 sched_avg_period(void)
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -325,7 +325,7 @@ void tick_nohz_stop_sched_tick(int inidl
 	} while (read_seqretry(&xtime_lock, seq));
 
 	if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
-	    arch_needs_cpu(cpu) || nohz_ratelimit(cpu)) {
+	    arch_needs_cpu(cpu)) {
 		next_jiffies = last_jiffies + 1;
 		delta_jiffies = 1;
 	} else {

[59/67] mtd: mxc_nand: fix unbalanced enable for IRQ

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3669 bytes --]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Eric Bénard <eric@eukrea.com>

commit 6a8cfcfb0de881735df4031eb5cc99be3d0971e9 upstream.

* preset should be done before sending the reset command

* without this, I get the following error on an i.MX35 :
[    0.900000] ------------[ cut here ]------------
[    0.900000] WARNING: at kernel/irq/manage.c:290 __enable_irq+0x4c/0x88()
[    0.900000] Unbalanced enable for IRQ 33
[    0.900000] Modules linked in:
[    0.900000] [<c002ffb8>] (unwind_backtrace+0x0/0xf0) from [<c02f7d0c>] (dump_stack+0x18/0x1c)
[    0.900000] [<c02f7d0c>] (dump_stack+0x18/0x1c) from [<c0049a44>] (warn_slowpath_common+0x54/0x6c)
[    0.900000] [<c0049a44>] (warn_slowpath_common+0x54/0x6c) from [<c0049b00>] (warn_slowpath_fmt+0x38/0x40)
[    0.900000] [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) from [<c008f65c>] (__enable_irq+0x4c/0x88)
[    0.900000] [<c008f65c>] (__enable_irq+0x4c/0x88) from [<c008fca0>] (enable_irq+0x54/0x98)
[    0.900000] [<c008fca0>] (enable_irq+0x54/0x98) from [<c021e618>] (wait_op_done+0x40/0x134)
[    0.900000] [<c021e618>] (wait_op_done+0x40/0x134) from [<c021e808>] (send_cmd+0x30/0x38)
[    0.900000] [<c021e808>] (send_cmd+0x30/0x38) from [<c021eb8c>] (mxc_nand_command+0x26c/0x328)
[    0.900000] [<c021eb8c>] (mxc_nand_command+0x26c/0x328) from [<c021aa60>] (nand_scan_ident+0x188/0x6c0)
[    0.900000] [<c021aa60>] (nand_scan_ident+0x188/0x6c0) from [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0)
[    0.900000] [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) from [<c01f9e88>] (platform_drv_probe+0x20/0x24)
[    0.900000] [<c01f9e88>] (platform_drv_probe+0x20/0x24) from [<c01f8c38>] (driver_probe_device+0xb0/0x164)
[    0.900000] [<c01f8c38>] (driver_probe_device+0xb0/0x164) from [<c01f8d54>] (__driver_attach+0x68/0x8c)
[    0.900000] [<c01f8d54>] (__driver_attach+0x68/0x8c) from [<c01f8348>] (bus_for_each_dev+0x50/0x84)
[    0.900000] [<c01f8348>] (bus_for_each_dev+0x50/0x84) from [<c01f8a9c>] (driver_attach+0x20/0x28)
[    0.900000] [<c01f8a9c>] (driver_attach+0x20/0x28) from [<c01f7c00>] (bus_add_driver+0x144/0x2dc)
[    0.900000] [<c01f7c00>] (bus_add_driver+0x144/0x2dc) from [<c01f906c>] (driver_register+0xb0/0x13c)
[    0.900000] [<c01f906c>] (driver_register+0xb0/0x13c) from [<c01fa13c>] (platform_driver_register+0x4c/0x60)
[    0.900000] [<c01fa13c>] (platform_driver_register+0x4c/0x60) from [<c01fa170>] (platform_driver_probe+0x20/0xa0)
[    0.900000] [<c01fa170>] (platform_driver_probe+0x20/0xa0) from [<c001a708>] (mxc_nd_init+0x18/0x24)
[    0.900000] [<c001a708>] (mxc_nd_init+0x18/0x24) from [<c002938c>] (do_one_initcall+0x64/0x1bc)
[    0.900000] [<c002938c>] (do_one_initcall+0x64/0x1bc) from [<c00084c4>] (kernel_init+0xe8/0x1ac)
[    0.900000] [<c00084c4>] (kernel_init+0xe8/0x1ac) from [<c002aee8>] (kernel_thread_exit+0x0/0x8)
[    0.900000] ---[ end trace 8bf72ac6ba089a19 ]---
[    1.140000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/mtd/nand/mxc_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -604,8 +604,8 @@ static void mxc_nand_command(struct mtd_
 	/* Command pre-processing step */
 	switch (command) {
 	case NAND_CMD_RESET:
-		send_cmd(host, command, false);
 		preset(mtd);
+		send_cmd(host, command, false);
 		break;
 
 	case NAND_CMD_STATUS:

[60/67] mtd: gen_nand: fix support for multiple chips

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Marek Vasut <marek.vasut@gmail.com>

commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb upstream.

This patch corrects a problem where gen_nand driver assumed there can be only
one chip and ignored the pdata->chip.nr_chips value.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/mtd/nand/plat_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -91,7 +91,7 @@ static int __devinit plat_nand_probe(str
 	}
 
 	/* Scan to find existance of the device */
-	if (nand_scan(&data->mtd, 1)) {
+	if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
 		err = -ENXIO;
 		goto out;
 	}

Re: [60/67] mtd: gen_nand: fix support for multiple chips

[Marek Vasut]

Dne Čt 12. srpna 2010 02:06:15 Greg KH napsal(a):
> 2.6.35-stable review patch.  If anyone has any objections, please let us
> know.

It's going to break plat-qong, apparently the code there is incorrect and 
depends on this bug, I'll send a patch for it in a bit.
> 
> ------------------
> 
> From: Marek Vasut <marek.vasut@gmail.com>
> 
> commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb upstream.
> 
> This patch corrects a problem where gen_nand driver assumed there can be
> only one chip and ignored the pdata->chip.nr_chips value.
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> 
> ---
>  drivers/mtd/nand/plat_nand.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- a/drivers/mtd/nand/plat_nand.c
> +++ b/drivers/mtd/nand/plat_nand.c
> @@ -91,7 +91,7 @@ static int __devinit plat_nand_probe(str
>  	}
> 
>  	/* Scan to find existance of the device */
> -	if (nand_scan(&data->mtd, 1)) {
> +	if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
>  		err = -ENXIO;
>  		goto out;
>  	}

[61/67] l2tp: fix export of header file for userspace

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: James Chapman <jchapman@katalix.com>

commit 4565956dc0847985c0403c9ebbf274b6a122e1e2 upstream.

The header file l2tp.h should be exported to the installed include/linux/
tree for userspace programs.

This patch fixes compilation errors in L2TP userspace apps which want to
use the new L2TP support introduced in 2.6.35.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/Kbuild |    1 +
 1 file changed, 1 insertion(+)

--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -276,6 +276,7 @@ ifneq ($(wildcard $(srctree)/arch/$(SRCA
 		  $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),)
 unifdef-y += kvm_para.h
 endif
+unifdef-y += l2tp.h
 unifdef-y += llc.h
 unifdef-y += loop.h
 unifdef-y += lp.h

[62/67] jfs: dont allow os2 xattr namespace overlap with others

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

commit aca0fa34bdaba39bfddddba8ca70dba4782e8fe6 upstream.

It's currently possible to bypass xattr namespace access rules by
prefixing valid xattr names with "os2.", since the os2 namespace stores
extended attributes in a legacy format with no prefix.

This patch adds checking to deny access to any valid namespace prefix
following "os2.".

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Reported-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/jfs/xattr.c |   87 ++++++++++++++++++++++++---------------------------------
 1 file changed, 38 insertions(+), 49 deletions(-)

--- a/fs/jfs/xattr.c
+++ b/fs/jfs/xattr.c
@@ -86,46 +86,25 @@ struct ea_buffer {
 #define EA_MALLOC	0x0008
 
 
+static int is_known_namespace(const char *name)
+{
+	if (strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN) &&
+	    strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) &&
+	    strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) &&
+	    strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
+		return false;
+
+	return true;
+}
+
 /*
  * These three routines are used to recognize on-disk extended attributes
  * that are in a recognized namespace.  If the attribute is not recognized,
  * "os2." is prepended to the name
  */
-static inline int is_os2_xattr(struct jfs_ea *ea)
+static int is_os2_xattr(struct jfs_ea *ea)
 {
-	/*
-	 * Check for "system."
-	 */
-	if ((ea->namelen >= XATTR_SYSTEM_PREFIX_LEN) &&
-	    !strncmp(ea->name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
-		return false;
-	/*
-	 * Check for "user."
-	 */
-	if ((ea->namelen >= XATTR_USER_PREFIX_LEN) &&
-	    !strncmp(ea->name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
-		return false;
-	/*
-	 * Check for "security."
-	 */
-	if ((ea->namelen >= XATTR_SECURITY_PREFIX_LEN) &&
-	    !strncmp(ea->name, XATTR_SECURITY_PREFIX,
-		     XATTR_SECURITY_PREFIX_LEN))
-		return false;
-	/*
-	 * Check for "trusted."
-	 */
-	if ((ea->namelen >= XATTR_TRUSTED_PREFIX_LEN) &&
-	    !strncmp(ea->name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
-		return false;
-	/*
-	 * Add any other valid namespace prefixes here
-	 */
-
-	/*
-	 * We assume it's OS/2's flat namespace
-	 */
-	return true;
+	return !is_known_namespace(ea->name);
 }
 
 static inline int name_size(struct jfs_ea *ea)
@@ -764,13 +743,23 @@ static int can_set_xattr(struct inode *i
 	if (!strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
 		return can_set_system_xattr(inode, name, value, value_len);
 
+	if (!strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN)) {
+		/*
+		 * This makes sure that we aren't trying to set an
+		 * attribute in a different namespace by prefixing it
+		 * with "os2."
+		 */
+		if (is_known_namespace(name + XATTR_OS2_PREFIX_LEN))
+				return -EOPNOTSUPP;
+		return 0;
+	}
+
 	/*
 	 * Don't allow setting an attribute in an unknown namespace.
 	 */
 	if (strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) &&
 	    strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) &&
-	    strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) &&
-	    strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN))
+	    strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
 		return -EOPNOTSUPP;
 
 	return 0;
@@ -952,19 +941,8 @@ ssize_t __jfs_getxattr(struct inode *ino
 	int xattr_size;
 	ssize_t size;
 	int namelen = strlen(name);
-	char *os2name = NULL;
 	char *value;
 
-	if (strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN) == 0) {
-		os2name = kmalloc(namelen - XATTR_OS2_PREFIX_LEN + 1,
-				  GFP_KERNEL);
-		if (!os2name)
-			return -ENOMEM;
-		strcpy(os2name, name + XATTR_OS2_PREFIX_LEN);
-		name = os2name;
-		namelen -= XATTR_OS2_PREFIX_LEN;
-	}
-
 	down_read(&JFS_IP(inode)->xattr_sem);
 
 	xattr_size = ea_get(inode, &ea_buf, 0);
@@ -1002,8 +980,6 @@ ssize_t __jfs_getxattr(struct inode *ino
       out:
 	up_read(&JFS_IP(inode)->xattr_sem);
 
-	kfree(os2name);
-
 	return size;
 }
 
@@ -1012,6 +988,19 @@ ssize_t jfs_getxattr(struct dentry *dent
 {
 	int err;
 
+	if (strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN) == 0) {
+		/*
+		 * skip past "os2." prefix
+		 */
+		name += XATTR_OS2_PREFIX_LEN;
+		/*
+		 * Don't allow retrieving properly prefixed attributes
+		 * by prepending them with "os2."
+		 */
+		if (is_known_namespace(name))
+			return -EOPNOTSUPP;
+	}
+
 	err = __jfs_getxattr(dentry->d_inode, name, data, buf_size);
 
 	return err;

[63/67] net: Fix NETDEV_NOTIFY_PEERS to not conflict with NETDEV_BONDING_DESLAVE.

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: David S. Miller <davem@davemloft.net>

commit 38117d1495e587fbb10d6e55733139a27893cef5 upstream.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/notifier.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -210,7 +210,7 @@ static inline int notifier_to_errno(int
 #define NETDEV_POST_INIT	0x0010
 #define NETDEV_UNREGISTER_BATCH 0x0011
 #define NETDEV_BONDING_DESLAVE  0x0012
-#define NETDEV_NOTIFY_PEERS	0x0012
+#define NETDEV_NOTIFY_PEERS	0x0013
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN

[64/67] irq: Add new IRQ flag IRQF_NO_SUSPEND

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ian Campbell <ian.campbell@citrix.com>

commit 685fd0b4ea3f0f1d5385610b0d5b57775a8d5842 upstream.

A small number of users of IRQF_TIMER are using it for the implied no
suspend behaviour on interrupts which are not timer interrupts.

Therefore add a new IRQF_NO_SUSPEND flag, rename IRQF_TIMER to
__IRQF_TIMER and redefine IRQF_TIMER in terms of these new flags.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: xen-devel@lists.xensource.com
Cc: linux-input@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1280398595-29708-1-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/interrupt.h |    7 ++++++-
 kernel/irq/manage.c       |    2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -53,16 +53,21 @@
  * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
  *                Used by threaded interrupts which need to keep the
  *                irq line disabled until the threaded handler has been run.
+ * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
+ *
  */
 #define IRQF_DISABLED		0x00000020
 #define IRQF_SAMPLE_RANDOM	0x00000040
 #define IRQF_SHARED		0x00000080
 #define IRQF_PROBE_SHARED	0x00000100
-#define IRQF_TIMER		0x00000200
+#define __IRQF_TIMER		0x00000200
 #define IRQF_PERCPU		0x00000400
 #define IRQF_NOBALANCING	0x00000800
 #define IRQF_IRQPOLL		0x00001000
 #define IRQF_ONESHOT		0x00002000
+#define IRQF_NO_SUSPEND		0x00004000
+
+#define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND)
 
 /*
  * Bits used by threaded handlers:
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -216,7 +216,7 @@ static inline int setup_affinity(unsigne
 void __disable_irq(struct irq_desc *desc, unsigned int irq, bool suspend)
 {
 	if (suspend) {
-		if (!desc->action || (desc->action->flags & IRQF_TIMER))
+		if (!desc->action || (desc->action->flags & IRQF_NO_SUSPEND))
 			return;
 		desc->status |= IRQ_SUSPENDED;
 	}

[64/67] irq: Add new IRQ flag IRQF_NO_SUSPEND

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ian Campbell <ian.campbell@citrix.com>

commit 685fd0b4ea3f0f1d5385610b0d5b57775a8d5842 upstream.

A small number of users of IRQF_TIMER are using it for the implied no
suspend behaviour on interrupts which are not timer interrupts.

Therefore add a new IRQF_NO_SUSPEND flag, rename IRQF_TIMER to
__IRQF_TIMER and redefine IRQF_TIMER in terms of these new flags.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: xen-devel@lists.xensource.com
Cc: linux-input@vger.kernel.org
Cc: linuxppc-dev@ozlabs.org
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1280398595-29708-1-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/interrupt.h |    7 ++++++-
 kernel/irq/manage.c       |    2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -53,16 +53,21 @@
  * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
  *                Used by threaded interrupts which need to keep the
  *                irq line disabled until the threaded handler has been run.
+ * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
+ *
  */
 #define IRQF_DISABLED		0x00000020
 #define IRQF_SAMPLE_RANDOM	0x00000040
 #define IRQF_SHARED		0x00000080
 #define IRQF_PROBE_SHARED	0x00000100
-#define IRQF_TIMER		0x00000200
+#define __IRQF_TIMER		0x00000200
 #define IRQF_PERCPU		0x00000400
 #define IRQF_NOBALANCING	0x00000800
 #define IRQF_IRQPOLL		0x00001000
 #define IRQF_ONESHOT		0x00002000
+#define IRQF_NO_SUSPEND		0x00004000
+
+#define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND)
 
 /*
  * Bits used by threaded handlers:
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -216,7 +216,7 @@ static inline int setup_affinity(unsigne
 void __disable_irq(struct irq_desc *desc, unsigned int irq, bool suspend)
 {
 	if (suspend) {
-		if (!desc->action || (desc->action->flags & IRQF_TIMER))
+		if (!desc->action || (desc->action->flags & IRQF_NO_SUSPEND))
 			return;
 		desc->status |= IRQ_SUSPENDED;
 	}

[65/67] xen: Do not suspend IPI IRQs.

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ian Campbell <ian.campbell@citrix.com>

commit 4877c737283813bdb4bebfa3168c1585f6e3a8ca upstream.

In general the semantics of IPIs are that they are are expected to
continue functioning after dpm_suspend_noirq().

Specifically I have seen a deadlock between the callfunc IPI and the
stop machine used by xen's do_suspend() routine. If one CPU has already
called dpm_suspend_noirq() then there is a window where it can be sent
a callfunc IPI before all the other CPUs have entered stop_cpu().

If this happens then the first CPU ends up spinning in stop_cpu()
waiting for the other to rendezvous in state STOPMACHINE_PREPARE while
the other is spinning in csd_lock_wait().

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/xen/events.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -536,6 +536,7 @@ int bind_ipi_to_irqhandler(enum ipi_vect
 	if (irq < 0)
 		return irq;
 
+	irqflags |= IRQF_NO_SUSPEND;
 	retval = request_irq(irq, handler, irqflags, devname, dev_id);
 	if (retval != 0) {
 		unbind_from_irq(irq);

[65/67] xen: Do not suspend IPI IRQs.

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ian Campbell <ian.campbell@citrix.com>

commit 4877c737283813bdb4bebfa3168c1585f6e3a8ca upstream.

In general the semantics of IPIs are that they are are expected to
continue functioning after dpm_suspend_noirq().

Specifically I have seen a deadlock between the callfunc IPI and the
stop machine used by xen's do_suspend() routine. If one CPU has already
called dpm_suspend_noirq() then there is a window where it can be sent
a callfunc IPI before all the other CPUs have entered stop_cpu().

If this happens then the first CPU ends up spinning in stop_cpu()
waiting for the other to rendezvous in state STOPMACHINE_PREPARE while
the other is spinning in csd_lock_wait().

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/xen/events.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -536,6 +536,7 @@ int bind_ipi_to_irqhandler(enum ipi_vect
 	if (irq < 0)
 		return irq;
 
+	irqflags |= IRQF_NO_SUSPEND;
 	retval = request_irq(irq, handler, irqflags, devname, dev_id);
 	if (retval != 0) {
 		unbind_from_irq(irq);

[66/67] crypto: testmgr - add an option to disable cryptoalgos self-tests

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Alexander Shishkin <virtuoso@slind.org>

commit 0b767f96164b2b27488e3daa722ff16e89d49314 upstream.

By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus
self-tests will still run, but it is now possible to disable them
to gain some time during bootup.

Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 crypto/Kconfig   |    8 ++++++++
 crypto/algboss.c |    4 ++++
 crypto/testmgr.c |   14 ++++++++++++++
 3 files changed, 26 insertions(+)

--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -96,6 +96,14 @@ config CRYPTO_MANAGER2
 	select CRYPTO_BLKCIPHER2
 	select CRYPTO_PCOMP
 
+config CRYPTO_MANAGER_TESTS
+	bool "Run algolithms' self-tests"
+	default y
+	depends on CRYPTO_MANAGER2
+	help
+	  Run cryptomanager's tests for the new crypto algorithms being
+	  registered.
+
 config CRYPTO_GF128MUL
 	tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
--- a/crypto/algboss.c
+++ b/crypto/algboss.c
@@ -206,6 +206,7 @@ err:
 	return NOTIFY_OK;
 }
 
+#ifdef CONFIG_CRYPTO_MANAGER_TESTS
 static int cryptomgr_test(void *data)
 {
 	struct crypto_test_param *param = data;
@@ -266,6 +267,7 @@ err_put_module:
 err:
 	return NOTIFY_OK;
 }
+#endif /* CONFIG_CRYPTO_MANAGER_TESTS */
 
 static int cryptomgr_notify(struct notifier_block *this, unsigned long msg,
 			    void *data)
@@ -273,8 +275,10 @@ static int cryptomgr_notify(struct notif
 	switch (msg) {
 	case CRYPTO_MSG_ALG_REQUEST:
 		return cryptomgr_schedule_probe(data);
+#ifdef CONFIG_CRYPTO_MANAGER_TESTS
 	case CRYPTO_MSG_ALG_REGISTER:
 		return cryptomgr_schedule_test(data);
+#endif
 	}
 
 	return NOTIFY_DONE;
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -22,6 +22,17 @@
 #include <crypto/rng.h>
 
 #include "internal.h"
+
+#ifndef CONFIG_CRYPTO_MANAGER_TESTS
+
+/* a perfect nop */
+int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
+{
+	return 0;
+}
+
+#else
+
 #include "testmgr.h"
 
 /*
@@ -2530,4 +2541,7 @@ notest:
 non_fips_alg:
 	return -EINVAL;
 }
+
+#endif /* CONFIG_CRYPTO_MANAGER_TESTS */
+
 EXPORT_SYMBOL_GPL(alg_test);

[67/67] ext4: fix freeze deadlock under IO

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Eric Sandeen <sandeen@sandeen.net>

commit 437f88cc031ffe7f37f3e705367f4fe1f4be8b0f upstream.

Commit 6b0310fbf087ad6 caused a regression resulting in deadlocks
when freezing a filesystem which had active IO; the vfs_check_frozen
level (SB_FREEZE_WRITE) did not let the freeze-related IO syncing
through.  Duh.

Changing the test to FREEZE_TRANS should let the normal freeze
syncing get through the fs, but still block any transactions from
starting once the fs is completely frozen.

I tested this by running fsstress in the background while periodically
snapshotting the fs and running fsck on the result.  I ran into
occasional deadlocks, but different ones.  I think this is a
fine fix for the problem at hand, and the other deadlocky things
will need more investigation.

Reported-by: Phillip Susi <psusi@cfl.rr.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ext4/super.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -241,7 +241,7 @@ handle_t *ext4_journal_start_sb(struct s
 	if (sb->s_flags & MS_RDONLY)
 		return ERR_PTR(-EROFS);
 
-	vfs_check_frozen(sb, SB_FREEZE_WRITE);
+	vfs_check_frozen(sb, SB_FREEZE_TRANS);
 	/* Special case here: if the journal has aborted behind our
 	 * backs (eg. EIO in the commit thread), then we still need to
 	 * take the FS itself readonly cleanly. */
@@ -3491,7 +3491,7 @@ int ext4_force_commit(struct super_block
 
 	journal = EXT4_SB(sb)->s_journal;
 	if (journal) {
-		vfs_check_frozen(sb, SB_FREEZE_WRITE);
+		vfs_check_frozen(sb, SB_FREEZE_TRANS);
 		ret = ext4_journal_force_commit(journal);
 	}