From: Jean Delvare <khali@linux-fr.org>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] Config file for Gigabyte MA785GM-US2H
Date: Thu, 19 Aug 2010 16:27:59 +0000 [thread overview]
Message-ID: <20100819182759.51f20d5f@hyperion.delvare> (raw)
In-Reply-To: <1281670026.2676.3.camel@honcho>
Hi Glen,
On Thu, 12 Aug 2010 20:27:06 -0700, Glen wrote:
> Here's a config file I worked up for the Gigabyte MA758GM-US2H. It's
> based off of one taken from your web site. This is NOT confirmed by
> examination of the MB, just by observed readings.
Out of curiosity, which configuration file did you start from?
> # lm_sensors configuration file for the Gigabyte MA785GM-US2H motherboard
> # 8-12-2010 G. Journeay <journeay@gmail.com>
Please follow ISO-8601 for dates, otherwise it's ambiguous. I read the
above as December 8th, withe you certainly meant August 12th.
> ### Voltages
>
> label in0 "Vcore"
> label in1 "Vram" # "DDR2" in BIOS
> label in2 "+3.3V"
> label in3 "+5V" # Not in BIOS
> ignore in4
> ignore in5
> ignore in6
> label in7 "+12V"
> label in8 "Vbat" # Not in BIOS
>
> # Vcore, Vram, +3.3V and Vbat are connected directly, so no compute
> # line is needed for these. For +5V the chip is configured to use
> # internal scaling. For +12V the default resistors seem to have been
> # used.
> compute in0 @ * ( 3/10+1), @ / ( 3/10+1)
This is inconsistent. You just said that Vcore didn't need any scaling,
yet you have a compute statement for Vcore. In all honestly, I would be
very surprised if it were correct... Vcore is never scaled, it doesn't
need to (it's way below the +4.08V limit.) How did you come up with it?
> compute in3 @ * (6.8/10+1), @ / (6.8/10+1)
> compute in7 @ * ( 45/10+1), @ / ( 45/10+1)
> ### Temperatures
>
> label temp1 "CPU Temp"
> label temp3 "NBr Temp"
> label temp2 "MB Temp"
Would be more intuitive to leave them in order.
> set temp1_min 0
> set temp1_max 60
> set temp2_min 0
> set temp3_max 50
> set temp3_min 0
> set temp3_max 50
You're setting temp3_max twice, and you're never setting temp2_max.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2010-08-19 16:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-13 3:27 [lm-sensors] Config file for Gigabyte MA785GM-US2H Glen
2010-08-19 16:27 ` Jean Delvare [this message]
2010-08-29 12:58 ` Glen
2010-08-29 18:57 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100819182759.51f20d5f@hyperion.delvare \
--to=khali@linux-fr.org \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.