Re: [PATCH 3/3] h1940: implement mmc_power function

[Vasily Khoruzhick <anarsoul@gmail.com>]

[-- Attachment #1: Type: Text/Plain, Size: 3378 bytes --]

В сообщении от 24 августа 2010 16:52:42 автор Marek Vasut написал:
> Dne Čt 19. srpna 2010 17:00:03 Vasily Khoruzhick napsal(a):
> > Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> > ---
> > 
> >  arch/arm/mach-s3c2410/include/mach/h1940-latch.h |    2 +-
> >  arch/arm/mach-s3c2410/mach-h1940.c               |   23
> > 
> > +++++++++++++++++++-- 2 files changed, 21 insertions(+), 4 deletions(-)
> > 
> > diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
> > b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index 73586f2..ef7d8cf
> > 100644
> > --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
> > +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
> > @@ -35,7 +35,7 @@
> > 
> >  #define H1940_LATCH_AUDIO_POWER		H1940_LATCH_GPIO(9)
> >  #define H1940_LATCH_SM803_ENABLE	H1940_LATCH_GPIO(10)
> >  #define H1940_LATCH_LCD_P4		H1940_LATCH_GPIO(11)
> > 
> > -#define H1940_LATCH_CPUQ5		H1940_LATCH_GPIO(12)
> > +#define H1940_LATCH_SD_POWER		H1940_LATCH_GPIO(12)
> > 
> >  #define H1940_LATCH_BLUETOOTH_POWER	H1940_LATCH_GPIO(13)
> >  #define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
> >  #define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
> > 
> > diff --git a/arch/arm/mach-s3c2410/mach-h1940.c
> > b/arch/arm/mach-s3c2410/mach-h1940.c index 9717790..c1ccc8e 100644
> > --- a/arch/arm/mach-s3c2410/mach-h1940.c
> > +++ b/arch/arm/mach-s3c2410/mach-h1940.c
> > @@ -116,8 +116,7 @@ static unsigned int latch_state =
> > H1940_LATCH_BIT(H1940_LATCH_LCD_P4) |
> > H1940_LATCH_BIT(H1940_LATCH_LCD_P1)			|
> > 
> >  	H1940_LATCH_BIT(H1940_LATCH_LCD_P2)			|
> >  	H1940_LATCH_BIT(H1940_LATCH_LCD_P3)			|
> > 
> > -	H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN)   |
> > -	H1940_LATCH_BIT(H1940_LATCH_CPUQ5);
> > +	H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN);
> > 
> >  static void h1940_latch_control(unsigned int clear, unsigned int set)
> >  {
> > 
> > @@ -259,10 +258,25 @@ static struct platform_device
> > h1940_device_bluetooth = { .id               = -1,
> > 
> >  };
> > 
> > +static void h1940_set_mmc_power(unsigned char power_mode, unsigned short
> > vdd) +{
> > +	switch (power_mode) {
> > +	case MMC_POWER_OFF:
> > +		gpio_set_value(H1940_LATCH_SD_POWER, 0);
> > +		break;
> > +	case MMC_POWER_UP:
> > +	case MMC_POWER_ON:
> > +		gpio_set_value(H1940_LATCH_SD_POWER, 1);
> > +		break;
> > +	default:
> > +		break;
> > +	};
> > +}
> > +
> > 
> >  static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
> >  
> >  	.gpio_detect   = S3C2410_GPF(5),
> >  	.gpio_wprotect = S3C2410_GPH(8),
> > 
> > -	.set_power     = NULL,
> > +	.set_power     = h1940_set_mmc_power,
> > 
> >  	.ocr_avail     = MMC_VDD_32_33,
> >  
> >  };
> 
> Can't you implement gpio_power into the s3c24xx mmc driver ? Then you can
> fix mach-n30 too.

Well, I'm happy with callback. However, maybe it worth to replace set_power 
callback with regulator.

> > @@ -402,6 +416,9 @@ static void __init h1940_init(void)
> > 
> >  	gpio_request(H1940_LATCH_USB_DP, "USB pullup");
> >  	gpio_direction_output(H1940_LATCH_USB_DP, 0);
> > 
> > +	gpio_request(H1940_LATCH_SD_POWER, "SD power");
> > +	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
> 
> Please handle possible return values here !

Ok, I suppose WARN_ON will be enought?

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]