* [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux This patches add basic support for Samsung S5P6450 SoC. Basically this patch moves mach-s5p6440 (ARCH_S5P6440) to mach-s5p64x0 (ARCH_S5P64X0) to support Samsung's new S5P6450 SoC. The ARCH_S5P64X0 can support S5P6440 and S5P6450 with one kernel image. It is tested on SMDK6440(S5P6440) and SMDK6450(S5P6450) with s5p64x0_defconfig. And this patch changes s5p6440_defconfig to s5p64x0_defconfig for S5P64X0. [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0 [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile [PATCH 03/13] ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support [PATCH 04/13] ARM: S5P64X0: Update Clock for S5P6440 and S5P6450 [PATCH 05/13] ARM: S5P64X0: Update IRQ support [PATCH 06/13] ARM: S5P64X0: Update Timer support [PATCH 07/13] ARM: S5P64X0: Update Audio support [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 [PATCH 09/13] ARM: S5P64X0: Add S5P6450 I2C support [PATCH 10/13] ARM: S5P64X0: Move GPIO support files for merge S5P64X0 [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450 [PATCH 13/13] ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450 ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patches add basic support for Samsung S5P6450 SoC. Basically this patch moves mach-s5p6440 (ARCH_S5P6440) to mach-s5p64x0 (ARCH_S5P64X0) to support Samsung's new S5P6450 SoC. The ARCH_S5P64X0 can support S5P6440 and S5P6450 with one kernel image. It is tested on SMDK6440(S5P6440) and SMDK6450(S5P6450) with s5p64x0_defconfig. And this patch changes s5p6440_defconfig to s5p64x0_defconfig for S5P64X0. [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0 [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile [PATCH 03/13] ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support [PATCH 04/13] ARM: S5P64X0: Update Clock for S5P6440 and S5P6450 [PATCH 05/13] ARM: S5P64X0: Update IRQ support [PATCH 06/13] ARM: S5P64X0: Update Timer support [PATCH 07/13] ARM: S5P64X0: Update Audio support [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 [PATCH 09/13] ARM: S5P64X0: Add S5P6450 I2C support [PATCH 10/13] ARM: S5P64X0: Move GPIO support files for merge S5P64X0 [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450 [PATCH 13/13] ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450 ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch moves some initial maps from plat-s5p to machine, so that can merge mach-s5p6440 and mach-s5p6450. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/cpu.c | 37 ++++++++++++++++++++++++++--- arch/arm/mach-s5p6440/include/mach/map.h | 7 +----- arch/arm/mach-s5p6442/cpu.c | 27 +++++++++++++++++++-- arch/arm/mach-s5p6442/include/mach/map.h | 6 ----- arch/arm/mach-s5pc100/cpu.c | 25 +++++++++++++++++++- arch/arm/mach-s5pc100/include/mach/map.h | 11 +++----- arch/arm/mach-s5pv210/cpu.c | 22 +++++++++++++++++- arch/arm/mach-s5pv210/include/mach/map.h | 8 ------ arch/arm/mach-s5pv310/cpu.c | 26 ++++++++++++++------ arch/arm/plat-s5p/cpu.c | 22 ----------------- 10 files changed, 125 insertions(+), 66 deletions(-) diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index 526f33a..a3c33d9 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5p6440/cpu.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -39,6 +39,32 @@ #include <plat/s5p6440.h> #include <plat/adc-core.h> +/* Initial IO mappings */ + +static struct map_desc s5p6440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P6440_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P6440_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P6440_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + } +}; + static void s5p6440_idle(void) { unsigned long val; @@ -54,15 +80,18 @@ static void s5p6440_idle(void) local_irq_enable(); } -/* s5p6440_map_io +/* + * s5p6440_map_io * * register the standard cpu IO areas -*/ + */ void __init s5p6440_map_io(void) { /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); + + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); } void __init s5p6440_init_clocks(int xtal) diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h index 6cc5cbc..11d31fe 100644 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -24,23 +24,18 @@ #define S5P_PA_SYSCON S5P6440_PA_SYSCON #define S5P6440_PA_GPIO (0xE0308000) -#define S5P_PA_GPIO S5P6440_PA_GPIO #define S5P6440_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6440_PA_VIC0 +#define S5P6440_PA_VIC1 (0xE4100000) #define S5P6440_PA_PDMA 0xE9000000 -#define S5P6440_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6440_PA_VIC1 - #define S5P6440_PA_TIMER (0xEA000000) #define S5P_PA_TIMER S5P6440_PA_TIMER #define S5P6440_PA_RTC (0xEA100000) #define S5P6440_PA_WDT (0xEA200000) -#define S5P_PA_WDT S5P6440_PA_WDT #define S5P6440_PA_UART (0xEC000000) diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index a48fb55..d3ab268 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5p6442/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -47,10 +47,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P6442_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P6442_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P6442_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5P6442_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, } }; @@ -62,10 +82,11 @@ static void s5p6442_idle(void) local_irq_enable(); } -/* s5p6442_map_io +/* + * s5p6442_map_io * * register the standard cpu IO areas -*/ + */ void __init s5p6442_map_io(void) { diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 281d256..31fb2e6 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -23,16 +23,10 @@ #define S5P_PA_SYSCON S5P6442_PA_SYSCON #define S5P6442_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5P6442_PA_GPIO #define S5P6442_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6442_PA_VIC0 - #define S5P6442_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6442_PA_VIC1 - #define S5P6442_PA_VIC2 (0xE4200000) -#define S5P_PA_VIC2 S5P6442_PA_VIC2 #define S5P6442_PA_MDMA 0xE8000000 #define S5P6442_PA_PDMA 0xE9000000 diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 251c92a..d13552c 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -1,5 +1,8 @@ /* linux/arch/arm/mach-s5pc100/cpu.c * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * @@ -56,11 +59,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PC100_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PC100_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P_PA_VIC2), + .pfn = __phys_to_pfn(S5PC100_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5PC100_VA_OTHERS, .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), .length = SZ_4K, diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 01b9134..8751ef4 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -44,19 +44,16 @@ #define S5PC100_PA_OTHERS (0xE0200000) #define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) -#define S5P_PA_GPIO (0xE0300000) +#define S5PC100_PA_GPIO (0xE0300000) #define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) /* Interrupt */ -#define S5PC100_PA_VIC (0xE4000000) +#define S5PC100_PA_VIC0 (0xE4000000) +#define S5PC100_PA_VIC1 (0xE4100000) +#define S5PC100_PA_VIC2 (0xE4200000) #define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_PA_VIC_OFFSET 0x100000 #define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) -#define S5P_PA_VIC0 S5PC1XX_PA_VIC(0) -#define S5P_PA_VIC1 S5PC1XX_PA_VIC(1) -#define S5P_PA_VIC2 S5PC1XX_PA_VIC(2) #define S5PC100_PA_ONENAND (0xE7100000) diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index b9f4d67..00f9ca1 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5pv210/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -50,6 +50,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_1M, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV210_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PV210_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PV210_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5PV210_PA_VIC2), .length = SZ_16K, @@ -60,6 +75,11 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SROMC, .pfn = __phys_to_pfn(S5PV210_PA_SROMC), .length = SZ_4K, diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index dd4fb6b..cc50541 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -26,7 +26,6 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5PV210_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5PV210_PA_GPIO /* SPI */ #define S5PV210_PA_SPI0 0xE1300000 @@ -72,16 +71,9 @@ #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) #define S5PV210_PA_VIC0 (0xF2000000) -#define S5P_PA_VIC0 S5PV210_PA_VIC0 - #define S5PV210_PA_VIC1 (0xF2100000) -#define S5P_PA_VIC1 S5PV210_PA_VIC1 - #define S5PV210_PA_VIC2 (0xF2200000) -#define S5P_PA_VIC2 S5PV210_PA_VIC2 - #define S5PV210_PA_VIC3 (0xF2300000) -#define S5P_PA_VIC3 S5PV210_PA_VIC3 #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index e5b261a..3b9c872 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); /* Initial IO mappings */ static struct map_desc s5pv310_iodesc[] __initdata = { { - .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), - .length = SZ_8K, + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(S5PV310_PA_CMU), + .length = SZ_128K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COMBINER_BASE, @@ -41,19 +46,24 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_L2CC, .pfn = __phys_to_pfn(S5PV310_PA_L2CC), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV310_PA_GPIO), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(S5PV310_PA_CMU), - .length = SZ_128K, + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index b07a078..57f08ee 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -89,33 +89,11 @@ static struct map_desc s5p_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, -#ifdef CONFIG_ARM_VIC - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, -#endif - }, { .virtual = (unsigned long)S3C_VA_TIMER, .pfn = __phys_to_pfn(S5P_PA_TIMER), .length = SZ_16K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_WATCHDOG, .pfn = __phys_to_pfn(S3C_PA_WDT), .length = SZ_4K, -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0 @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch moves some initial maps from plat-s5p to machine, so that can merge mach-s5p6440 and mach-s5p6450. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/cpu.c | 37 ++++++++++++++++++++++++++--- arch/arm/mach-s5p6440/include/mach/map.h | 7 +----- arch/arm/mach-s5p6442/cpu.c | 27 +++++++++++++++++++-- arch/arm/mach-s5p6442/include/mach/map.h | 6 ----- arch/arm/mach-s5pc100/cpu.c | 25 +++++++++++++++++++- arch/arm/mach-s5pc100/include/mach/map.h | 11 +++----- arch/arm/mach-s5pv210/cpu.c | 22 +++++++++++++++++- arch/arm/mach-s5pv210/include/mach/map.h | 8 ------ arch/arm/mach-s5pv310/cpu.c | 26 ++++++++++++++------ arch/arm/plat-s5p/cpu.c | 22 ----------------- 10 files changed, 125 insertions(+), 66 deletions(-) diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index 526f33a..a3c33d9 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5p6440/cpu.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -39,6 +39,32 @@ #include <plat/s5p6440.h> #include <plat/adc-core.h> +/* Initial IO mappings */ + +static struct map_desc s5p6440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P6440_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P6440_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P6440_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + } +}; + static void s5p6440_idle(void) { unsigned long val; @@ -54,15 +80,18 @@ static void s5p6440_idle(void) local_irq_enable(); } -/* s5p6440_map_io +/* + * s5p6440_map_io * * register the standard cpu IO areas -*/ + */ void __init s5p6440_map_io(void) { /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); + + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); } void __init s5p6440_init_clocks(int xtal) diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h index 6cc5cbc..11d31fe 100644 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -24,23 +24,18 @@ #define S5P_PA_SYSCON S5P6440_PA_SYSCON #define S5P6440_PA_GPIO (0xE0308000) -#define S5P_PA_GPIO S5P6440_PA_GPIO #define S5P6440_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6440_PA_VIC0 +#define S5P6440_PA_VIC1 (0xE4100000) #define S5P6440_PA_PDMA 0xE9000000 -#define S5P6440_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6440_PA_VIC1 - #define S5P6440_PA_TIMER (0xEA000000) #define S5P_PA_TIMER S5P6440_PA_TIMER #define S5P6440_PA_RTC (0xEA100000) #define S5P6440_PA_WDT (0xEA200000) -#define S5P_PA_WDT S5P6440_PA_WDT #define S5P6440_PA_UART (0xEC000000) diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index a48fb55..d3ab268 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5p6442/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -47,10 +47,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P6442_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P6442_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P6442_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5P6442_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, } }; @@ -62,10 +82,11 @@ static void s5p6442_idle(void) local_irq_enable(); } -/* s5p6442_map_io +/* + * s5p6442_map_io * * register the standard cpu IO areas -*/ + */ void __init s5p6442_map_io(void) { diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 281d256..31fb2e6 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -23,16 +23,10 @@ #define S5P_PA_SYSCON S5P6442_PA_SYSCON #define S5P6442_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5P6442_PA_GPIO #define S5P6442_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6442_PA_VIC0 - #define S5P6442_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6442_PA_VIC1 - #define S5P6442_PA_VIC2 (0xE4200000) -#define S5P_PA_VIC2 S5P6442_PA_VIC2 #define S5P6442_PA_MDMA 0xE8000000 #define S5P6442_PA_PDMA 0xE9000000 diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 251c92a..d13552c 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -1,5 +1,8 @@ /* linux/arch/arm/mach-s5pc100/cpu.c * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * @@ -56,11 +59,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PC100_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PC100_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P_PA_VIC2), + .pfn = __phys_to_pfn(S5PC100_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5PC100_VA_OTHERS, .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), .length = SZ_4K, diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 01b9134..8751ef4 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -44,19 +44,16 @@ #define S5PC100_PA_OTHERS (0xE0200000) #define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) -#define S5P_PA_GPIO (0xE0300000) +#define S5PC100_PA_GPIO (0xE0300000) #define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) /* Interrupt */ -#define S5PC100_PA_VIC (0xE4000000) +#define S5PC100_PA_VIC0 (0xE4000000) +#define S5PC100_PA_VIC1 (0xE4100000) +#define S5PC100_PA_VIC2 (0xE4200000) #define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_PA_VIC_OFFSET 0x100000 #define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) -#define S5P_PA_VIC0 S5PC1XX_PA_VIC(0) -#define S5P_PA_VIC1 S5PC1XX_PA_VIC(1) -#define S5P_PA_VIC2 S5PC1XX_PA_VIC(2) #define S5PC100_PA_ONENAND (0xE7100000) diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index b9f4d67..00f9ca1 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5pv210/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -50,6 +50,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_1M, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV210_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PV210_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PV210_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5PV210_PA_VIC2), .length = SZ_16K, @@ -60,6 +75,11 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SROMC, .pfn = __phys_to_pfn(S5PV210_PA_SROMC), .length = SZ_4K, diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index dd4fb6b..cc50541 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -26,7 +26,6 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5PV210_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5PV210_PA_GPIO /* SPI */ #define S5PV210_PA_SPI0 0xE1300000 @@ -72,16 +71,9 @@ #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) #define S5PV210_PA_VIC0 (0xF2000000) -#define S5P_PA_VIC0 S5PV210_PA_VIC0 - #define S5PV210_PA_VIC1 (0xF2100000) -#define S5P_PA_VIC1 S5PV210_PA_VIC1 - #define S5PV210_PA_VIC2 (0xF2200000) -#define S5P_PA_VIC2 S5PV210_PA_VIC2 - #define S5PV210_PA_VIC3 (0xF2300000) -#define S5P_PA_VIC3 S5PV210_PA_VIC3 #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index e5b261a..3b9c872 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); /* Initial IO mappings */ static struct map_desc s5pv310_iodesc[] __initdata = { { - .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), - .length = SZ_8K, + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(S5PV310_PA_CMU), + .length = SZ_128K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COMBINER_BASE, @@ -41,19 +46,24 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_L2CC, .pfn = __phys_to_pfn(S5PV310_PA_L2CC), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV310_PA_GPIO), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(S5PV310_PA_CMU), - .length = SZ_128K, + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index b07a078..57f08ee 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -89,33 +89,11 @@ static struct map_desc s5p_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, -#ifdef CONFIG_ARM_VIC - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, -#endif - }, { .virtual = (unsigned long)S3C_VA_TIMER, .pfn = __phys_to_pfn(S5P_PA_TIMER), .length = SZ_16K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_WATCHDOG, .pfn = __phys_to_pfn(S3C_PA_WDT), .length = SZ_4K, -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 9:42 ` Kyungmin Park -1 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-01 9:42 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux For long time you insist to use the S5P prefix, but it's changed to each SoC name. anyway good move. On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch moves some initial maps from plat-s5p to machine, > so that can merge mach-s5p6440 and mach-s5p6450. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > arch/arm/mach-s5p6440/cpu.c | 37 ++++++++++++++++++++++++++--- > arch/arm/mach-s5p6440/include/mach/map.h | 7 +----- > arch/arm/mach-s5p6442/cpu.c | 27 +++++++++++++++++++-- > arch/arm/mach-s5p6442/include/mach/map.h | 6 ----- > arch/arm/mach-s5pc100/cpu.c | 25 +++++++++++++++++++- > arch/arm/mach-s5pc100/include/mach/map.h | 11 +++----- > arch/arm/mach-s5pv210/cpu.c | 22 +++++++++++++++++- > arch/arm/mach-s5pv210/include/mach/map.h | 8 ------ > arch/arm/mach-s5pv310/cpu.c | 26 ++++++++++++++------ > arch/arm/plat-s5p/cpu.c | 22 ----------------- > 10 files changed, 125 insertions(+), 66 deletions(-) > > diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c > index 526f33a..a3c33d9 100644 > --- a/arch/arm/mach-s5p6440/cpu.c > +++ b/arch/arm/mach-s5p6440/cpu.c > @@ -1,7 +1,7 @@ > /* linux/arch/arm/mach-s5p6440/cpu.c > * > - * Copyright (c) 2009 Samsung Electronics Co., Ltd. > - * http://www.samsung.com/ > + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > @@ -39,6 +39,32 @@ > #include <plat/s5p6440.h> > #include <plat/adc-core.h> > > +/* Initial IO mappings */ > + > +static struct map_desc s5p6440_iodesc[] __initdata = { > + { > + .virtual = (unsigned long)S5P_VA_GPIO, > + .pfn = __phys_to_pfn(S5P6440_PA_GPIO), > + .length = SZ_4K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC0, > + .pfn = __phys_to_pfn(S5P6440_PA_VIC0), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC1, > + .pfn = __phys_to_pfn(S5P6440_PA_VIC1), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)S3C_VA_UART, > + .pfn = __phys_to_pfn(S3C_PA_UART), > + .length = SZ_512K, Yes it's just move to each SoCs. but It's too big some SoCs which has 0x400 offset. I think 8K is enough to cover uart. > + .type = MT_DEVICE, > + } > +}; > + > static void s5p6440_idle(void) > { > unsigned long val; > @@ -54,15 +80,18 @@ static void s5p6440_idle(void) > local_irq_enable(); > } > > -/* s5p6440_map_io > +/* > + * s5p6440_map_io > * > * register the standard cpu IO areas > -*/ > + */ > > void __init s5p6440_map_io(void) > { > /* initialize any device information early */ > s3c_adc_setname("s3c64xx-adc"); > + > + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); > } > > void __init s5p6440_init_clocks(int xtal) > diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h > index 6cc5cbc..11d31fe 100644 > --- a/arch/arm/mach-s5p6440/include/mach/map.h > +++ b/arch/arm/mach-s5p6440/include/mach/map.h > @@ -24,23 +24,18 @@ > #define S5P_PA_SYSCON S5P6440_PA_SYSCON > > #define S5P6440_PA_GPIO (0xE0308000) > -#define S5P_PA_GPIO S5P6440_PA_GPIO > > #define S5P6440_PA_VIC0 (0xE4000000) > -#define S5P_PA_VIC0 S5P6440_PA_VIC0 > +#define S5P6440_PA_VIC1 (0xE4100000) > > #define S5P6440_PA_PDMA 0xE9000000 > > -#define S5P6440_PA_VIC1 (0xE4100000) > -#define S5P_PA_VIC1 S5P6440_PA_VIC1 > - > #define S5P6440_PA_TIMER (0xEA000000) > #define S5P_PA_TIMER S5P6440_PA_TIMER > > #define S5P6440_PA_RTC (0xEA100000) > > #define S5P6440_PA_WDT (0xEA200000) > -#define S5P_PA_WDT S5P6440_PA_WDT > > #define S5P6440_PA_UART (0xEC000000) > > diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c > index a48fb55..d3ab268 100644 > --- a/arch/arm/mach-s5p6442/cpu.c > +++ b/arch/arm/mach-s5p6442/cpu.c > @@ -1,7 +1,7 @@ > /* linux/arch/arm/mach-s5p6442/cpu.c > * > * Copyright (c) 2010 Samsung Electronics Co., Ltd. > - * http://www.samsung.com/ > + * http://www.samsung.com > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > @@ -47,10 +47,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = { > .length = SZ_16K, > .type = MT_DEVICE, > }, { > + .virtual = (unsigned long)S5P_VA_GPIO, > + .pfn = __phys_to_pfn(S5P6442_PA_GPIO), > + .length = SZ_4K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC0, > + .pfn = __phys_to_pfn(S5P6442_PA_VIC0), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC1, > + .pfn = __phys_to_pfn(S5P6442_PA_VIC1), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > .virtual = (unsigned long)VA_VIC2, > .pfn = __phys_to_pfn(S5P6442_PA_VIC2), > .length = SZ_16K, > .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)S3C_VA_UART, > + .pfn = __phys_to_pfn(S3C_PA_UART), > + .length = SZ_512K, > + .type = MT_DEVICE, > } > }; > > @@ -62,10 +82,11 @@ static void s5p6442_idle(void) > local_irq_enable(); > } > > -/* s5p6442_map_io > +/* > + * s5p6442_map_io > * > * register the standard cpu IO areas > -*/ > + */ > > void __init s5p6442_map_io(void) > { > diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h > index 281d256..31fb2e6 100644 > --- a/arch/arm/mach-s5p6442/include/mach/map.h > +++ b/arch/arm/mach-s5p6442/include/mach/map.h > @@ -23,16 +23,10 @@ > #define S5P_PA_SYSCON S5P6442_PA_SYSCON > > #define S5P6442_PA_GPIO (0xE0200000) > -#define S5P_PA_GPIO S5P6442_PA_GPIO > > #define S5P6442_PA_VIC0 (0xE4000000) > -#define S5P_PA_VIC0 S5P6442_PA_VIC0 > - > #define S5P6442_PA_VIC1 (0xE4100000) > -#define S5P_PA_VIC1 S5P6442_PA_VIC1 > - > #define S5P6442_PA_VIC2 (0xE4200000) > -#define S5P_PA_VIC2 S5P6442_PA_VIC2 > > #define S5P6442_PA_MDMA 0xE8000000 > #define S5P6442_PA_PDMA 0xE9000000 > diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c > index 251c92a..d13552c 100644 > --- a/arch/arm/mach-s5pc100/cpu.c > +++ b/arch/arm/mach-s5pc100/cpu.c > @@ -1,5 +1,8 @@ > /* linux/arch/arm/mach-s5pc100/cpu.c > * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > * Copyright 2009 Samsung Electronics Co. > * Byungho Min <bhmin@samsung.com> > * > @@ -56,11 +59,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = { > .length = SZ_16K, > .type = MT_DEVICE, > }, { > + .virtual = (unsigned long)S5P_VA_GPIO, > + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), > + .length = SZ_4K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC0, > + .pfn = __phys_to_pfn(S5PC100_PA_VIC0), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC1, > + .pfn = __phys_to_pfn(S5PC100_PA_VIC1), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > .virtual = (unsigned long)VA_VIC2, > - .pfn = __phys_to_pfn(S5P_PA_VIC2), > + .pfn = __phys_to_pfn(S5PC100_PA_VIC2), > .length = SZ_16K, > .type = MT_DEVICE, > }, { > + .virtual = (unsigned long)S3C_VA_UART, > + .pfn = __phys_to_pfn(S3C_PA_UART), > + .length = SZ_512K, > + .type = MT_DEVICE, > + }, { > .virtual = (unsigned long)S5PC100_VA_OTHERS, > .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), > .length = SZ_4K, > diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h > index 01b9134..8751ef4 100644 > --- a/arch/arm/mach-s5pc100/include/mach/map.h > +++ b/arch/arm/mach-s5pc100/include/mach/map.h > @@ -44,19 +44,16 @@ > #define S5PC100_PA_OTHERS (0xE0200000) > #define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) > > -#define S5P_PA_GPIO (0xE0300000) > +#define S5PC100_PA_GPIO (0xE0300000) > #define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) > > /* Interrupt */ > -#define S5PC100_PA_VIC (0xE4000000) > +#define S5PC100_PA_VIC0 (0xE4000000) > +#define S5PC100_PA_VIC1 (0xE4100000) > +#define S5PC100_PA_VIC2 (0xE4200000) > #define S5PC100_VA_VIC S3C_VA_IRQ > -#define S5PC100_PA_VIC_OFFSET 0x100000 > #define S5PC100_VA_VIC_OFFSET 0x10000 > -#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) > #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) > -#define S5P_PA_VIC0 S5PC1XX_PA_VIC(0) > -#define S5P_PA_VIC1 S5PC1XX_PA_VIC(1) > -#define S5P_PA_VIC2 S5PC1XX_PA_VIC(2) > > > #define S5PC100_PA_ONENAND (0xE7100000) > diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c > index b9f4d67..00f9ca1 100644 > --- a/arch/arm/mach-s5pv210/cpu.c > +++ b/arch/arm/mach-s5pv210/cpu.c > @@ -1,7 +1,7 @@ > /* linux/arch/arm/mach-s5pv210/cpu.c > * > * Copyright (c) 2010 Samsung Electronics Co., Ltd. > - * http://www.samsung.com/ > + * http://www.samsung.com > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > @@ -50,6 +50,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { > .length = SZ_1M, > .type = MT_DEVICE, > }, { > + .virtual = (unsigned long)S5P_VA_GPIO, > + .pfn = __phys_to_pfn(S5PV210_PA_GPIO), > + .length = SZ_4K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC0, > + .pfn = __phys_to_pfn(S5PV210_PA_VIC0), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)VA_VIC1, > + .pfn = __phys_to_pfn(S5PV210_PA_VIC1), > + .length = SZ_16K, > + .type = MT_DEVICE, > + }, { > .virtual = (unsigned long)VA_VIC2, > .pfn = __phys_to_pfn(S5PV210_PA_VIC2), > .length = SZ_16K, > @@ -60,6 +75,11 @@ static struct map_desc s5pv210_iodesc[] __initdata = { > .length = SZ_16K, > .type = MT_DEVICE, > }, { > + .virtual = (unsigned long)S3C_VA_UART, > + .pfn = __phys_to_pfn(S3C_PA_UART), > + .length = SZ_512K, > + .type = MT_DEVICE, > + }, { > .virtual = (unsigned long)S5P_VA_SROMC, > .pfn = __phys_to_pfn(S5PV210_PA_SROMC), > .length = SZ_4K, > diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h > index dd4fb6b..cc50541 100644 > --- a/arch/arm/mach-s5pv210/include/mach/map.h > +++ b/arch/arm/mach-s5pv210/include/mach/map.h > @@ -26,7 +26,6 @@ > #define S5P_PA_SYSCON S5PV210_PA_SYSCON > > #define S5PV210_PA_GPIO (0xE0200000) > -#define S5P_PA_GPIO S5PV210_PA_GPIO > > /* SPI */ > #define S5PV210_PA_SPI0 0xE1300000 > @@ -72,16 +71,9 @@ > #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) > > #define S5PV210_PA_VIC0 (0xF2000000) > -#define S5P_PA_VIC0 S5PV210_PA_VIC0 > - > #define S5PV210_PA_VIC1 (0xF2100000) > -#define S5P_PA_VIC1 S5PV210_PA_VIC1 > - > #define S5PV210_PA_VIC2 (0xF2200000) > -#define S5P_PA_VIC2 S5PV210_PA_VIC2 > - > #define S5PV210_PA_VIC3 (0xF2300000) > -#define S5P_PA_VIC3 S5PV210_PA_VIC3 > > #define S5PV210_PA_SDRAM (0x20000000) > #define S5P_PA_SDRAM S5PV210_PA_SDRAM > diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c > index e5b261a..3b9c872 100644 > --- a/arch/arm/mach-s5pv310/cpu.c > +++ b/arch/arm/mach-s5pv310/cpu.c > @@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); > /* Initial IO mappings */ > static struct map_desc s5pv310_iodesc[] __initdata = { > { > - .virtual = (unsigned long)S5P_VA_COREPERI_BASE, > - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), > - .length = SZ_8K, > + .virtual = (unsigned long)S5P_VA_SYSRAM, > + .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), > + .length = SZ_4K, > + .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)S5P_VA_CMU, > + .pfn = __phys_to_pfn(S5PV310_PA_CMU), > + .length = SZ_128K, > .type = MT_DEVICE, > }, { > .virtual = (unsigned long)S5P_VA_COMBINER_BASE, > @@ -41,19 +46,24 @@ static struct map_desc s5pv310_iodesc[] __initdata = { > .length = SZ_4K, > .type = MT_DEVICE, > }, { > + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, > + .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), > + .length = SZ_8K, > + .type = MT_DEVICE, > + }, { > .virtual = (unsigned long)S5P_VA_L2CC, > .pfn = __phys_to_pfn(S5PV310_PA_L2CC), > .length = SZ_4K, > .type = MT_DEVICE, > }, { > - .virtual = (unsigned long)S5P_VA_SYSRAM, > - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), > + .virtual = (unsigned long)S5P_VA_GPIO, > + .pfn = __phys_to_pfn(S5PV310_PA_GPIO), > .length = SZ_4K, > .type = MT_DEVICE, > }, { > - .virtual = (unsigned long)S5P_VA_CMU, > - .pfn = __phys_to_pfn(S5PV310_PA_CMU), > - .length = SZ_128K, > + .virtual = (unsigned long)S3C_VA_UART, > + .pfn = __phys_to_pfn(S3C_PA_UART), > + .length = SZ_512K, > .type = MT_DEVICE, > }, > }; > diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c > index b07a078..57f08ee 100644 > --- a/arch/arm/plat-s5p/cpu.c > +++ b/arch/arm/plat-s5p/cpu.c > @@ -89,33 +89,11 @@ static struct map_desc s5p_iodesc[] __initdata = { > .length = SZ_64K, > .type = MT_DEVICE, > }, { > - .virtual = (unsigned long)S3C_VA_UART, > - .pfn = __phys_to_pfn(S3C_PA_UART), > - .length = SZ_512K, > - .type = MT_DEVICE, > -#ifdef CONFIG_ARM_VIC > - }, { > - .virtual = (unsigned long)VA_VIC0, > - .pfn = __phys_to_pfn(S5P_PA_VIC0), > - .length = SZ_16K, > - .type = MT_DEVICE, > - }, { > - .virtual = (unsigned long)VA_VIC1, > - .pfn = __phys_to_pfn(S5P_PA_VIC1), > - .length = SZ_16K, > - .type = MT_DEVICE, > -#endif > - }, { > .virtual = (unsigned long)S3C_VA_TIMER, > .pfn = __phys_to_pfn(S5P_PA_TIMER), > .length = SZ_16K, > .type = MT_DEVICE, > }, { > - .virtual = (unsigned long)S5P_VA_GPIO, > - .pfn = __phys_to_pfn(S5P_PA_GPIO), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, { > .virtual = (unsigned long)S3C_VA_WATCHDOG, > .pfn = __phys_to_pfn(S3C_PA_WDT), > .length = SZ_4K, > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0 @ 2010-09-01 9:42 ` Kyungmin Park 0 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-01 9:42 UTC (permalink / raw) To: linux-arm-kernel For long time you insist to use the S5P prefix, but it's changed to each SoC name. anyway good move. On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch moves some initial maps from plat-s5p to machine, > so that can merge mach-s5p6440 and mach-s5p6450. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > ?arch/arm/mach-s5p6440/cpu.c ? ? ? ? ? ? ?| ? 37 ++++++++++++++++++++++++++--- > ?arch/arm/mach-s5p6440/include/mach/map.h | ? ?7 +----- > ?arch/arm/mach-s5p6442/cpu.c ? ? ? ? ? ? ?| ? 27 +++++++++++++++++++-- > ?arch/arm/mach-s5p6442/include/mach/map.h | ? ?6 ----- > ?arch/arm/mach-s5pc100/cpu.c ? ? ? ? ? ? ?| ? 25 +++++++++++++++++++- > ?arch/arm/mach-s5pc100/include/mach/map.h | ? 11 +++----- > ?arch/arm/mach-s5pv210/cpu.c ? ? ? ? ? ? ?| ? 22 +++++++++++++++++- > ?arch/arm/mach-s5pv210/include/mach/map.h | ? ?8 ------ > ?arch/arm/mach-s5pv310/cpu.c ? ? ? ? ? ? ?| ? 26 ++++++++++++++------ > ?arch/arm/plat-s5p/cpu.c ? ? ? ? ? ? ? ? ?| ? 22 ----------------- > ?10 files changed, 125 insertions(+), 66 deletions(-) > > diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c > index 526f33a..a3c33d9 100644 > --- a/arch/arm/mach-s5p6440/cpu.c > +++ b/arch/arm/mach-s5p6440/cpu.c > @@ -1,7 +1,7 @@ > ?/* linux/arch/arm/mach-s5p6440/cpu.c > ?* > - * Copyright (c) 2009 Samsung Electronics Co., Ltd. > - * ? ? ? ? ? ? http://www.samsung.com/ > + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > + * ? ? ? ? ? ? http://www.samsung.com > ?* > ?* This program is free software; you can redistribute it and/or modify > ?* it under the terms of the GNU General Public License version 2 as > @@ -39,6 +39,32 @@ > ?#include <plat/s5p6440.h> > ?#include <plat/adc-core.h> > > +/* Initial IO mappings */ > + > +static struct map_desc s5p6440_iodesc[] __initdata = { > + ? ? ? { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_GPIO, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P6440_PA_GPIO), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_4K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC0, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P6440_PA_VIC0), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC1, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P6440_PA_VIC1), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S3C_VA_UART, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S3C_PA_UART), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_512K, Yes it's just move to each SoCs. but It's too big some SoCs which has 0x400 offset. I think 8K is enough to cover uart. > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? } > +}; > + > ?static void s5p6440_idle(void) > ?{ > ? ? ? ?unsigned long val; > @@ -54,15 +80,18 @@ static void s5p6440_idle(void) > ? ? ? ?local_irq_enable(); > ?} > > -/* s5p6440_map_io > +/* > + * s5p6440_map_io > ?* > ?* register the standard cpu IO areas > -*/ > + */ > > ?void __init s5p6440_map_io(void) > ?{ > ? ? ? ?/* initialize any device information early */ > ? ? ? ?s3c_adc_setname("s3c64xx-adc"); > + > + ? ? ? iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); > ?} > > ?void __init s5p6440_init_clocks(int xtal) > diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h > index 6cc5cbc..11d31fe 100644 > --- a/arch/arm/mach-s5p6440/include/mach/map.h > +++ b/arch/arm/mach-s5p6440/include/mach/map.h > @@ -24,23 +24,18 @@ > ?#define S5P_PA_SYSCON ? ? ? ? ?S5P6440_PA_SYSCON > > ?#define S5P6440_PA_GPIO ? ? ? ? ? ? ? ?(0xE0308000) > -#define S5P_PA_GPIO ? ? ? ? ? ?S5P6440_PA_GPIO > > ?#define S5P6440_PA_VIC0 ? ? ? ? ? ? ? ?(0xE4000000) > -#define S5P_PA_VIC0 ? ? ? ? ? ?S5P6440_PA_VIC0 > +#define S5P6440_PA_VIC1 ? ? ? ? ? ? ? ?(0xE4100000) > > ?#define S5P6440_PA_PDMA ? ? ? ? ? ? ? ?0xE9000000 > > -#define S5P6440_PA_VIC1 ? ? ? ? ? ? ? ?(0xE4100000) > -#define S5P_PA_VIC1 ? ? ? ? ? ?S5P6440_PA_VIC1 > - > ?#define S5P6440_PA_TIMER ? ? ? (0xEA000000) > ?#define S5P_PA_TIMER ? ? ? ? ? S5P6440_PA_TIMER > > ?#define S5P6440_PA_RTC ? ? ? ? (0xEA100000) > > ?#define S5P6440_PA_WDT ? ? ? ? (0xEA200000) > -#define S5P_PA_WDT ? ? ? ? ? ? S5P6440_PA_WDT > > ?#define S5P6440_PA_UART ? ? ? ? ? ? ? ?(0xEC000000) > > diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c > index a48fb55..d3ab268 100644 > --- a/arch/arm/mach-s5p6442/cpu.c > +++ b/arch/arm/mach-s5p6442/cpu.c > @@ -1,7 +1,7 @@ > ?/* linux/arch/arm/mach-s5p6442/cpu.c > ?* > ?* Copyright (c) 2010 Samsung Electronics Co., Ltd. > - * ? ? ? ? ? ? http://www.samsung.com/ > + * ? ? ? ? ? ? http://www.samsung.com > ?* > ?* This program is free software; you can redistribute it and/or modify > ?* it under the terms of the GNU General Public License version 2 as > @@ -47,10 +47,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = { > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_16K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_GPIO, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P6442_PA_GPIO), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_4K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC0, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P6442_PA_VIC0), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC1, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P6442_PA_VIC1), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)VA_VIC2, > ? ? ? ? ? ? ? ?.pfn ? ? ? ? ? ?= __phys_to_pfn(S5P6442_PA_VIC2), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_16K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S3C_VA_UART, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S3C_PA_UART), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_512K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?} > ?}; > > @@ -62,10 +82,11 @@ static void s5p6442_idle(void) > ? ? ? ?local_irq_enable(); > ?} > > -/* s5p6442_map_io > +/* > + * s5p6442_map_io > ?* > ?* register the standard cpu IO areas > -*/ > + */ > > ?void __init s5p6442_map_io(void) > ?{ > diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h > index 281d256..31fb2e6 100644 > --- a/arch/arm/mach-s5p6442/include/mach/map.h > +++ b/arch/arm/mach-s5p6442/include/mach/map.h > @@ -23,16 +23,10 @@ > ?#define S5P_PA_SYSCON ? ? ? ? ?S5P6442_PA_SYSCON > > ?#define S5P6442_PA_GPIO ? ? ? ? ? ? ? ?(0xE0200000) > -#define S5P_PA_GPIO ? ? ? ? ? ?S5P6442_PA_GPIO > > ?#define S5P6442_PA_VIC0 ? ? ? ? ? ? ? ?(0xE4000000) > -#define S5P_PA_VIC0 ? ? ? ? ? ?S5P6442_PA_VIC0 > - > ?#define S5P6442_PA_VIC1 ? ? ? ? ? ? ? ?(0xE4100000) > -#define S5P_PA_VIC1 ? ? ? ? ? ?S5P6442_PA_VIC1 > - > ?#define S5P6442_PA_VIC2 ? ? ? ? ? ? ? ?(0xE4200000) > -#define S5P_PA_VIC2 ? ? ? ? ? ?S5P6442_PA_VIC2 > > ?#define S5P6442_PA_MDMA ? ? ? ? ? ? ? ?0xE8000000 > ?#define S5P6442_PA_PDMA ? ? ? ? ? ? ? ?0xE9000000 > diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c > index 251c92a..d13552c 100644 > --- a/arch/arm/mach-s5pc100/cpu.c > +++ b/arch/arm/mach-s5pc100/cpu.c > @@ -1,5 +1,8 @@ > ?/* linux/arch/arm/mach-s5pc100/cpu.c > ?* > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * ? ? ? ? ? ? http://www.samsung.com > + * > ?* Copyright 2009 Samsung Electronics Co. > ?* ? ? Byungho Min <bhmin@samsung.com> > ?* > @@ -56,11 +59,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = { > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_16K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_GPIO, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PC100_PA_GPIO), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_4K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC0, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PC100_PA_VIC0), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC1, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PC100_PA_VIC1), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)VA_VIC2, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P_PA_VIC2), > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PC100_PA_VIC2), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_16K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S3C_VA_UART, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S3C_PA_UART), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_512K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)S5PC100_VA_OTHERS, > ? ? ? ? ? ? ? ?.pfn ? ? ? ? ? ?= __phys_to_pfn(S5PC100_PA_OTHERS), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_4K, > diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h > index 01b9134..8751ef4 100644 > --- a/arch/arm/mach-s5pc100/include/mach/map.h > +++ b/arch/arm/mach-s5pc100/include/mach/map.h > @@ -44,19 +44,16 @@ > ?#define S5PC100_PA_OTHERS ? ? ?(0xE0200000) > ?#define S5PC100_VA_OTHERS ? ? ?(S3C_VA_SYS + 0x10000) > > -#define S5P_PA_GPIO ? ? ? ? ? ?(0xE0300000) > +#define S5PC100_PA_GPIO ? ? ? ? ? ? ? ?(0xE0300000) > ?#define S5PC1XX_VA_GPIO ? ? ? ? ? ? ? ?S3C_ADDR(0x00500000) > > ?/* Interrupt */ > -#define S5PC100_PA_VIC ? ? ? ? (0xE4000000) > +#define S5PC100_PA_VIC0 ? ? ? ? ? ? ? ?(0xE4000000) > +#define S5PC100_PA_VIC1 ? ? ? ? ? ? ? ?(0xE4100000) > +#define S5PC100_PA_VIC2 ? ? ? ? ? ? ? ?(0xE4200000) > ?#define S5PC100_VA_VIC ? ? ? ? S3C_VA_IRQ > -#define S5PC100_PA_VIC_OFFSET ?0x100000 > ?#define S5PC100_VA_VIC_OFFSET ?0x10000 > -#define S5PC1XX_PA_VIC(x) ? ? ?(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) > ?#define S5PC1XX_VA_VIC(x) ? ? ?(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) > -#define S5P_PA_VIC0 ? ? ? ? ? ?S5PC1XX_PA_VIC(0) > -#define S5P_PA_VIC1 ? ? ? ? ? ?S5PC1XX_PA_VIC(1) > -#define S5P_PA_VIC2 ? ? ? ? ? ?S5PC1XX_PA_VIC(2) > > > ?#define S5PC100_PA_ONENAND ? ? (0xE7100000) > diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c > index b9f4d67..00f9ca1 100644 > --- a/arch/arm/mach-s5pv210/cpu.c > +++ b/arch/arm/mach-s5pv210/cpu.c > @@ -1,7 +1,7 @@ > ?/* linux/arch/arm/mach-s5pv210/cpu.c > ?* > ?* Copyright (c) 2010 Samsung Electronics Co., Ltd. > - * ? ? ? ? ? ? http://www.samsung.com/ > + * ? ? ? ? ? ? http://www.samsung.com > ?* > ?* This program is free software; you can redistribute it and/or modify > ?* it under the terms of the GNU General Public License version 2 as > @@ -50,6 +50,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_1M, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_GPIO, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV210_PA_GPIO), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_4K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC0, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV210_PA_VIC0), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC1, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV210_PA_VIC1), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)VA_VIC2, > ? ? ? ? ? ? ? ?.pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV210_PA_VIC2), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_16K, > @@ -60,6 +75,11 @@ static struct map_desc s5pv210_iodesc[] __initdata = { > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_16K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S3C_VA_UART, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S3C_PA_UART), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_512K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)S5P_VA_SROMC, > ? ? ? ? ? ? ? ?.pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV210_PA_SROMC), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_4K, > diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h > index dd4fb6b..cc50541 100644 > --- a/arch/arm/mach-s5pv210/include/mach/map.h > +++ b/arch/arm/mach-s5pv210/include/mach/map.h > @@ -26,7 +26,6 @@ > ?#define S5P_PA_SYSCON ? ? ? ? ?S5PV210_PA_SYSCON > > ?#define S5PV210_PA_GPIO ? ? ? ? ? ? ? ?(0xE0200000) > -#define S5P_PA_GPIO ? ? ? ? ? ?S5PV210_PA_GPIO > > ?/* SPI */ > ?#define S5PV210_PA_SPI0 ? ? ? ? ? ? ? ?0xE1300000 > @@ -72,16 +71,9 @@ > ?#define S5PV210_PA_HSMMC(x) ? ?(0xEB000000 + ((x) * 0x100000)) > > ?#define S5PV210_PA_VIC0 ? ? ? ? ? ? ? ?(0xF2000000) > -#define S5P_PA_VIC0 ? ? ? ? ? ?S5PV210_PA_VIC0 > - > ?#define S5PV210_PA_VIC1 ? ? ? ? ? ? ? ?(0xF2100000) > -#define S5P_PA_VIC1 ? ? ? ? ? ?S5PV210_PA_VIC1 > - > ?#define S5PV210_PA_VIC2 ? ? ? ? ? ? ? ?(0xF2200000) > -#define S5P_PA_VIC2 ? ? ? ? ? ?S5PV210_PA_VIC2 > - > ?#define S5PV210_PA_VIC3 ? ? ? ? ? ? ? ?(0xF2300000) > -#define S5P_PA_VIC3 ? ? ? ? ? ?S5PV210_PA_VIC3 > > ?#define S5PV210_PA_SDRAM ? ? ? (0x20000000) > ?#define S5P_PA_SDRAM ? ? ? ? ? S5PV210_PA_SDRAM > diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c > index e5b261a..3b9c872 100644 > --- a/arch/arm/mach-s5pv310/cpu.c > +++ b/arch/arm/mach-s5pv310/cpu.c > @@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); > ?/* Initial IO mappings */ > ?static struct map_desc s5pv310_iodesc[] __initdata = { > ? ? ? ?{ > - ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_COREPERI_BASE, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_COREPERI), > - ? ? ? ? ? ? ? .length ? ? ? ? = SZ_8K, > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_SYSRAM, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_SYSRAM), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_4K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_CMU, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_CMU), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_128K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)S5P_VA_COMBINER_BASE, > @@ -41,19 +46,24 @@ static struct map_desc s5pv310_iodesc[] __initdata = { > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_4K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_COREPERI_BASE, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_COREPERI), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_8K, > + ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > + ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)S5P_VA_L2CC, > ? ? ? ? ? ? ? ?.pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_L2CC), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_4K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > - ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_SYSRAM, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_SYSRAM), > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_GPIO, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_GPIO), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_4K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > - ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_CMU, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5PV310_PA_CMU), > - ? ? ? ? ? ? ? .length ? ? ? ? = SZ_128K, > + ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S3C_VA_UART, > + ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S3C_PA_UART), > + ? ? ? ? ? ? ? .length ? ? ? ? = SZ_512K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, > ?}; > diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c > index b07a078..57f08ee 100644 > --- a/arch/arm/plat-s5p/cpu.c > +++ b/arch/arm/plat-s5p/cpu.c > @@ -89,33 +89,11 @@ static struct map_desc s5p_iodesc[] __initdata = { > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_64K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > - ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S3C_VA_UART, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S3C_PA_UART), > - ? ? ? ? ? ? ? .length ? ? ? ? = SZ_512K, > - ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > -#ifdef CONFIG_ARM_VIC > - ? ? ? }, { > - ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC0, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P_PA_VIC0), > - ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > - ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > - ? ? ? }, { > - ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)VA_VIC1, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P_PA_VIC1), > - ? ? ? ? ? ? ? .length ? ? ? ? = SZ_16K, > - ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > -#endif > - ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)S3C_VA_TIMER, > ? ? ? ? ? ? ? ?.pfn ? ? ? ? ? ?= __phys_to_pfn(S5P_PA_TIMER), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_16K, > ? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE, > ? ? ? ?}, { > - ? ? ? ? ? ? ? .virtual ? ? ? ?= (unsigned long)S5P_VA_GPIO, > - ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(S5P_PA_GPIO), > - ? ? ? ? ? ? ? .length ? ? ? ? = SZ_4K, > - ? ? ? ? ? ? ? .type ? ? ? ? ? = MT_DEVICE, > - ? ? ? }, { > ? ? ? ? ? ? ? ?.virtual ? ? ? ?= (unsigned long)S3C_VA_WATCHDOG, > ? ? ? ? ? ? ? ?.pfn ? ? ? ? ? ?= __phys_to_pfn(S3C_PA_WDT), > ? ? ? ? ? ? ? ?.length ? ? ? ? = SZ_4K, > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at ?http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 machines. It also updates arch/arm/ Kconfig and Makefile to include for support ARCH_S5P64X0 with one kernel image. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/Kconfig | 16 +++--- arch/arm/Makefile | 2 +- arch/arm/mach-s5p6440/Kconfig | 33 ------------ arch/arm/mach-s5p6440/Makefile | 25 --------- arch/arm/mach-s5p64x0/Kconfig | 55 ++++++++++++++++++++ arch/arm/mach-s5p64x0/Makefile | 30 +++++++++++ .../{mach-s5p6440 => mach-s5p64x0}/Makefile.boot | 0 arch/arm/plat-s5p/Kconfig | 4 +- 8 files changed, 95 insertions(+), 70 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/Kconfig delete mode 100644 arch/arm/mach-s5p6440/Makefile create mode 100644 arch/arm/mach-s5p64x0/Kconfig create mode 100644 arch/arm/mach-s5p64x0/Makefile rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/Makefile.boot (100%) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a7ed21f..40e75b3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -679,17 +679,15 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P6440 - bool "Samsung S5P6440" +config ARCH_S5P64X0 + bool "Samsung S5P6440 S5P6450" select CPU_V6 select GENERIC_GPIO select HAVE_CLK - select HAVE_S3C2410_WATCHDOG select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C - select HAVE_S3C_RTC help - Samsung S5P6440 CPU based systems + Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, + SMDK6450. config ARCH_S5P6442 bool "Samsung S5P6442" @@ -929,7 +927,7 @@ if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" endif -source "arch/arm/mach-s5p6440/Kconfig" +source "arch/arm/mach-s5p64x0/Kconfig" source "arch/arm/mach-s5p6442/Kconfig" @@ -1232,7 +1230,7 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 @@ -1609,7 +1607,7 @@ config ZRELADDR default 0x10008000 if ARCH_MSM ||\ ARCH_OMAP1 ||\ ARCH_RPC - default 0x20008000 if ARCH_S5P6440 ||\ + default 0x20008000 if ARCH_S5P64X0 ||\ ARCH_S5P6442 ||\ ARCH_S5PC100 ||\ ARCH_S5PV210 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 59c1ce8..8420f21 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx -machine-$(CONFIG_ARCH_S5P6440) := s5p6440 +machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig deleted file mode 100644 index 6a4af7f..0000000 --- a/arch/arm/mach-s5p6440/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -# arch/arm/mach-s5p6440/Kconfig -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -if ARCH_S5P6440 - -config CPU_S5P6440 - bool - select S3C_PL330_DMA - help - Enable S5P6440 CPU support - -config S5P6440_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config MACH_SMDK6440 - bool "SMDK6440" - select CPU_S5P6440 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - select S5P6440_SETUP_I2C1 - help - Machine support for the Samsung SMDK6440 - -endif diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile deleted file mode 100644 index c3fe4d3..0000000 --- a/arch/arm/mach-s5p6440/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6440/Makefile -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6440 system - -obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o dma.o -obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig new file mode 100644 index 0000000..488375c --- /dev/null +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -0,0 +1,55 @@ +# arch/arm/mach-s5p64x0/Kconfig +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +if ARCH_S5P64X0 + +config CPU_S5P6440 + bool + select PLAT_S5P + select S3C_PL330_DMA + help + Enable S5P6440 CPU support + +config CPU_S5P6450 + bool + select PLAT_S5P + select S3C_PL330_DMA + help + Enable S5P6450 CPU support + +config S5P64X0_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +# machine support + +config MACH_SMDK6440 + bool "SMDK6440" + select CPU_S5P6440 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6440 + +config MACH_SMDK6450 + bool "SMDK6450" + select CPU_S5P6450 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6450 + +endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile new file mode 100644 index 0000000..2655829 --- /dev/null +++ b/arch/arm/mach-s5p64x0/Makefile @@ -0,0 +1,30 @@ +# arch/arm/mach-s5p64x0/Makefile +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5P64X0 system + +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o +obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o gpio.o +obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o +obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o + +obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot similarity index 100% rename from arch/arm/mach-s5p6440/Makefile.boot rename to arch/arm/mach-s5p64x0/Makefile.boot diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index c6a855d..90f97d6 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) default y select ARM_VIC if !ARCH_S5PV310 select ARM_GIC if ARCH_S5PV310 @@ -30,7 +30,7 @@ config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) - Note: Do not choose this for S5P6440. + Note: Do not choose this for S5P6440 and S5P6450. config S5P_DEV_FIMC0 bool -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 machines. It also updates arch/arm/ Kconfig and Makefile to include for support ARCH_S5P64X0 with one kernel image. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/Kconfig | 16 +++--- arch/arm/Makefile | 2 +- arch/arm/mach-s5p6440/Kconfig | 33 ------------ arch/arm/mach-s5p6440/Makefile | 25 --------- arch/arm/mach-s5p64x0/Kconfig | 55 ++++++++++++++++++++ arch/arm/mach-s5p64x0/Makefile | 30 +++++++++++ .../{mach-s5p6440 => mach-s5p64x0}/Makefile.boot | 0 arch/arm/plat-s5p/Kconfig | 4 +- 8 files changed, 95 insertions(+), 70 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/Kconfig delete mode 100644 arch/arm/mach-s5p6440/Makefile create mode 100644 arch/arm/mach-s5p64x0/Kconfig create mode 100644 arch/arm/mach-s5p64x0/Makefile rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/Makefile.boot (100%) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a7ed21f..40e75b3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -679,17 +679,15 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P6440 - bool "Samsung S5P6440" +config ARCH_S5P64X0 + bool "Samsung S5P6440 S5P6450" select CPU_V6 select GENERIC_GPIO select HAVE_CLK - select HAVE_S3C2410_WATCHDOG select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C - select HAVE_S3C_RTC help - Samsung S5P6440 CPU based systems + Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, + SMDK6450. config ARCH_S5P6442 bool "Samsung S5P6442" @@ -929,7 +927,7 @@ if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" endif -source "arch/arm/mach-s5p6440/Kconfig" +source "arch/arm/mach-s5p64x0/Kconfig" source "arch/arm/mach-s5p6442/Kconfig" @@ -1232,7 +1230,7 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 @@ -1609,7 +1607,7 @@ config ZRELADDR default 0x10008000 if ARCH_MSM ||\ ARCH_OMAP1 ||\ ARCH_RPC - default 0x20008000 if ARCH_S5P6440 ||\ + default 0x20008000 if ARCH_S5P64X0 ||\ ARCH_S5P6442 ||\ ARCH_S5PC100 ||\ ARCH_S5PV210 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 59c1ce8..8420f21 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx -machine-$(CONFIG_ARCH_S5P6440) := s5p6440 +machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig deleted file mode 100644 index 6a4af7f..0000000 --- a/arch/arm/mach-s5p6440/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -# arch/arm/mach-s5p6440/Kconfig -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -if ARCH_S5P6440 - -config CPU_S5P6440 - bool - select S3C_PL330_DMA - help - Enable S5P6440 CPU support - -config S5P6440_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config MACH_SMDK6440 - bool "SMDK6440" - select CPU_S5P6440 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - select S5P6440_SETUP_I2C1 - help - Machine support for the Samsung SMDK6440 - -endif diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile deleted file mode 100644 index c3fe4d3..0000000 --- a/arch/arm/mach-s5p6440/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6440/Makefile -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6440 system - -obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o dma.o -obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig new file mode 100644 index 0000000..488375c --- /dev/null +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -0,0 +1,55 @@ +# arch/arm/mach-s5p64x0/Kconfig +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +if ARCH_S5P64X0 + +config CPU_S5P6440 + bool + select PLAT_S5P + select S3C_PL330_DMA + help + Enable S5P6440 CPU support + +config CPU_S5P6450 + bool + select PLAT_S5P + select S3C_PL330_DMA + help + Enable S5P6450 CPU support + +config S5P64X0_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +# machine support + +config MACH_SMDK6440 + bool "SMDK6440" + select CPU_S5P6440 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6440 + +config MACH_SMDK6450 + bool "SMDK6450" + select CPU_S5P6450 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6450 + +endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile new file mode 100644 index 0000000..2655829 --- /dev/null +++ b/arch/arm/mach-s5p64x0/Makefile @@ -0,0 +1,30 @@ +# arch/arm/mach-s5p64x0/Makefile +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5P64X0 system + +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o +obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o gpio.o +obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o +obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o + +obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot similarity index 100% rename from arch/arm/mach-s5p6440/Makefile.boot rename to arch/arm/mach-s5p64x0/Makefile.boot diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index c6a855d..90f97d6 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) default y select ARM_VIC if !ARCH_S5PV310 select ARM_GIC if ARCH_S5PV310 @@ -30,7 +30,7 @@ config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) - Note: Do not choose this for S5P6440. + Note: Do not choose this for S5P6440 and S5P6450. config S5P_DEV_FIMC0 bool -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 9:47 ` Kyungmin Park -1 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-01 9:47 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 > machines. It also updates arch/arm/ Kconfig and Makefile to include for > support ARCH_S5P64X0 with one kernel image. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > arch/arm/Kconfig | 16 +++--- > arch/arm/Makefile | 2 +- > arch/arm/mach-s5p6440/Kconfig | 33 ------------ > arch/arm/mach-s5p6440/Makefile | 25 --------- > arch/arm/mach-s5p64x0/Kconfig | 55 ++++++++++++++++++++ > arch/arm/mach-s5p64x0/Makefile | 30 +++++++++++ > .../{mach-s5p6440 => mach-s5p64x0}/Makefile.boot | 0 > arch/arm/plat-s5p/Kconfig | 4 +- > 8 files changed, 95 insertions(+), 70 deletions(-) > delete mode 100644 arch/arm/mach-s5p6440/Kconfig > delete mode 100644 arch/arm/mach-s5p6440/Makefile > create mode 100644 arch/arm/mach-s5p64x0/Kconfig > create mode 100644 arch/arm/mach-s5p64x0/Makefile > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/Makefile.boot (100%) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index a7ed21f..40e75b3 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -679,17 +679,15 @@ config ARCH_S3C64XX > help > Samsung S3C64XX series based systems > > -config ARCH_S5P6440 > - bool "Samsung S5P6440" > +config ARCH_S5P64X0 > + bool "Samsung S5P6440 S5P6450" > select CPU_V6 > select GENERIC_GPIO > select HAVE_CLK > - select HAVE_S3C2410_WATCHDOG > select ARCH_USES_GETTIMEOFFSET > - select HAVE_S3C2410_I2C > - select HAVE_S3C_RTC Why HAVE_* is deleted? > help > - Samsung S5P6440 CPU based systems > + Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, > + SMDK6450. > > config ARCH_S5P6442 > bool "Samsung S5P6442" > @@ -929,7 +927,7 @@ if ARCH_S3C64XX > source "arch/arm/mach-s3c64xx/Kconfig" > endif > > -source "arch/arm/mach-s5p6440/Kconfig" > +source "arch/arm/mach-s5p64x0/Kconfig" > > source "arch/arm/mach-s5p6442/Kconfig" > > @@ -1232,7 +1230,7 @@ source kernel/Kconfig.preempt > > config HZ > int > - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ > + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ > ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 > default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER > default AT91_TIMER_HZ if ARCH_AT91 > @@ -1609,7 +1607,7 @@ config ZRELADDR > default 0x10008000 if ARCH_MSM ||\ > ARCH_OMAP1 ||\ > ARCH_RPC > - default 0x20008000 if ARCH_S5P6440 ||\ > + default 0x20008000 if ARCH_S5P64X0 ||\ > ARCH_S5P6442 ||\ > ARCH_S5PC100 ||\ > ARCH_S5PV210 > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index 59c1ce8..8420f21 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc > machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 > machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 > machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx > -machine-$(CONFIG_ARCH_S5P6440) := s5p6440 > +machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 > machine-$(CONFIG_ARCH_S5P6442) := s5p6442 > machine-$(CONFIG_ARCH_S5PC100) := s5pc100 > machine-$(CONFIG_ARCH_S5PV210) := s5pv210 > diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig > deleted file mode 100644 > index 6a4af7f..0000000 > --- a/arch/arm/mach-s5p6440/Kconfig > +++ /dev/null > @@ -1,33 +0,0 @@ > -# arch/arm/mach-s5p6440/Kconfig > -# > -# Copyright (c) 2009 Samsung Electronics Co., Ltd. > -# http://www.samsung.com/ > -# > -# Licensed under GPLv2 > - > -if ARCH_S5P6440 > - > -config CPU_S5P6440 > - bool > - select S3C_PL330_DMA > - help > - Enable S5P6440 CPU support > - > -config S5P6440_SETUP_I2C1 > - bool > - help > - Common setup code for i2c bus 1. > - > -config MACH_SMDK6440 > - bool "SMDK6440" > - select CPU_S5P6440 > - select S3C_DEV_I2C1 > - select S3C_DEV_RTC > - select S3C_DEV_WDT > - select SAMSUNG_DEV_ADC > - select SAMSUNG_DEV_TS > - select S5P6440_SETUP_I2C1 > - help > - Machine support for the Samsung SMDK6440 > - > -endif > diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile > deleted file mode 100644 > index c3fe4d3..0000000 > --- a/arch/arm/mach-s5p6440/Makefile > +++ /dev/null > @@ -1,25 +0,0 @@ > -# arch/arm/mach-s5p6440/Makefile > -# > -# Copyright (c) 2009 Samsung Electronics Co., Ltd. > -# http://www.samsung.com/ > -# > -# Licensed under GPLv2 > - > -obj-y := > -obj-m := > -obj-n := > -obj- := > - > -# Core support for S5P6440 system > - > -obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o dma.o > -obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o > - > -# machine support > - > -obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o > - > -# device support > -obj-y += dev-audio.o > -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o > -obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o > diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig > new file mode 100644 > index 0000000..488375c > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/Kconfig > @@ -0,0 +1,55 @@ > +# arch/arm/mach-s5p64x0/Kconfig > +# > +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > +# http://www.samsung.com/ > +# > +# Licensed under GPLv2 > + > +if ARCH_S5P64X0 > + > +config CPU_S5P6440 > + bool > + select PLAT_S5P > + select S3C_PL330_DMA > + help > + Enable S5P6440 CPU support > + > +config CPU_S5P6450 > + bool > + select PLAT_S5P > + select S3C_PL330_DMA > + help > + Enable S5P6450 CPU support > + > +config S5P64X0_SETUP_I2C1 > + bool > + help > + Common setup code for i2c bus 1. > + > +# machine support > + > +config MACH_SMDK6440 > + bool "SMDK6440" > + select CPU_S5P6440 > + select S3C_DEV_I2C1 > + select S3C_DEV_RTC > + select S3C_DEV_WDT > + select SAMSUNG_DEV_ADC > + select SAMSUNG_DEV_TS > + select S5P64X0_SETUP_I2C1 > + help > + Machine support for the Samsung SMDK6440 > + > +config MACH_SMDK6450 > + bool "SMDK6450" > + select CPU_S5P6450 > + select S3C_DEV_I2C1 > + select S3C_DEV_RTC > + select S3C_DEV_WDT > + select SAMSUNG_DEV_ADC > + select SAMSUNG_DEV_TS > + select S5P64X0_SETUP_I2C1 > + help > + Machine support for the Samsung SMDK6450 In most case SMDK has almost same functionality. make a common select e.g., SMDK_COMMON and each board just select it. > + > +endif > diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile > new file mode 100644 > index 0000000..2655829 > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/Makefile > @@ -0,0 +1,30 @@ > +# arch/arm/mach-s5p64x0/Makefile > +# > +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > +# http://www.samsung.com > +# > +# Licensed under GPLv2 > + > +obj-y := > +obj-m := > +obj-n := > +obj- := > + > +# Core support for S5P64X0 system > + > +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o > +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o > +obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o gpio.o > +obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o > + > +# machine support > + > +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o > +obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o Are there difference between smdk6440 and smdk6450 except the SOC? If no, how about to make a single file as pxa or omap does? Thank you, Kyungmin Park > + > +# device support > + > +obj-y += dev-audio.o > +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o > + > +obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o > diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot > similarity index 100% > rename from arch/arm/mach-s5p6440/Makefile.boot > rename to arch/arm/mach-s5p64x0/Makefile.boot > diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig > index c6a855d..90f97d6 100644 > --- a/arch/arm/plat-s5p/Kconfig > +++ b/arch/arm/plat-s5p/Kconfig > @@ -7,7 +7,7 @@ > > config PLAT_S5P > bool > - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) > + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) > default y > select ARM_VIC if !ARCH_S5PV310 > select ARM_GIC if ARCH_S5PV310 > @@ -30,7 +30,7 @@ config S5P_EXT_INT > bool > help > Use the external interrupts (other than GPIO interrupts.) > - Note: Do not choose this for S5P6440. > + Note: Do not choose this for S5P6440 and S5P6450. > > config S5P_DEV_FIMC0 > bool > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile @ 2010-09-01 9:47 ` Kyungmin Park 0 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-01 9:47 UTC (permalink / raw) To: linux-arm-kernel On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 > machines. It also updates arch/arm/ Kconfig and Makefile to include for > support ARCH_S5P64X0 with one kernel image. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > ?arch/arm/Kconfig ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 16 +++--- > ?arch/arm/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?2 +- > ?arch/arm/mach-s5p6440/Kconfig ? ? ? ? ? ? ? ? ? ? ?| ? 33 ------------ > ?arch/arm/mach-s5p6440/Makefile ? ? ? ? ? ? ? ? ? ? | ? 25 --------- > ?arch/arm/mach-s5p64x0/Kconfig ? ? ? ? ? ? ? ? ? ? ?| ? 55 ++++++++++++++++++++ > ?arch/arm/mach-s5p64x0/Makefile ? ? ? ? ? ? ? ? ? ? | ? 30 +++++++++++ > ?.../{mach-s5p6440 => mach-s5p64x0}/Makefile.boot ? | ? ?0 > ?arch/arm/plat-s5p/Kconfig ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?4 +- > ?8 files changed, 95 insertions(+), 70 deletions(-) > ?delete mode 100644 arch/arm/mach-s5p6440/Kconfig > ?delete mode 100644 arch/arm/mach-s5p6440/Makefile > ?create mode 100644 arch/arm/mach-s5p64x0/Kconfig > ?create mode 100644 arch/arm/mach-s5p64x0/Makefile > ?rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/Makefile.boot (100%) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index a7ed21f..40e75b3 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -679,17 +679,15 @@ config ARCH_S3C64XX > ? ? ? ?help > ? ? ? ? ?Samsung S3C64XX series based systems > > -config ARCH_S5P6440 > - ? ? ? bool "Samsung S5P6440" > +config ARCH_S5P64X0 > + ? ? ? bool "Samsung S5P6440 S5P6450" > ? ? ? ?select CPU_V6 > ? ? ? ?select GENERIC_GPIO > ? ? ? ?select HAVE_CLK > - ? ? ? select HAVE_S3C2410_WATCHDOG > ? ? ? ?select ARCH_USES_GETTIMEOFFSET > - ? ? ? select HAVE_S3C2410_I2C > - ? ? ? select HAVE_S3C_RTC Why HAVE_* is deleted? > ? ? ? ?help > - ? ? ? ? Samsung S5P6440 CPU based systems > + ? ? ? ? Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, > + ? ? ? ? SMDK6450. > > ?config ARCH_S5P6442 > ? ? ? ?bool "Samsung S5P6442" > @@ -929,7 +927,7 @@ if ARCH_S3C64XX > ?source "arch/arm/mach-s3c64xx/Kconfig" > ?endif > > -source "arch/arm/mach-s5p6440/Kconfig" > +source "arch/arm/mach-s5p64x0/Kconfig" > > ?source "arch/arm/mach-s5p6442/Kconfig" > > @@ -1232,7 +1230,7 @@ source kernel/Kconfig.preempt > > ?config HZ > ? ? ? ?int > - ? ? ? default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ > + ? ? ? default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ > ? ? ? ? ? ? ? ?ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 > ? ? ? ?default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER > ? ? ? ?default AT91_TIMER_HZ if ARCH_AT91 > @@ -1609,7 +1607,7 @@ config ZRELADDR > ? ? ? ?default 0x10008000 if ARCH_MSM ||\ > ? ? ? ? ? ? ? ?ARCH_OMAP1 ||\ > ? ? ? ? ? ? ? ?ARCH_RPC > - ? ? ? default 0x20008000 if ARCH_S5P6440 ||\ > + ? ? ? default 0x20008000 if ARCH_S5P64X0 ||\ > ? ? ? ? ? ? ? ?ARCH_S5P6442 ||\ > ? ? ? ? ? ? ? ?ARCH_S5PC100 ||\ > ? ? ? ? ? ? ? ?ARCH_S5PV210 > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index 59c1ce8..8420f21 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) ? ? ? ? ?:= rpc > ?machine-$(CONFIG_ARCH_S3C2410) ? ? ? ? := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 > ?machine-$(CONFIG_ARCH_S3C24A0) ? ? ? ? := s3c24a0 > ?machine-$(CONFIG_ARCH_S3C64XX) ? ? ? ? := s3c64xx > -machine-$(CONFIG_ARCH_S5P6440) ? ? ? ? := s5p6440 > +machine-$(CONFIG_ARCH_S5P64X0) ? ? ? ? := s5p64x0 > ?machine-$(CONFIG_ARCH_S5P6442) ? ? ? ? := s5p6442 > ?machine-$(CONFIG_ARCH_S5PC100) ? ? ? ? := s5pc100 > ?machine-$(CONFIG_ARCH_S5PV210) ? ? ? ? := s5pv210 > diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig > deleted file mode 100644 > index 6a4af7f..0000000 > --- a/arch/arm/mach-s5p6440/Kconfig > +++ /dev/null > @@ -1,33 +0,0 @@ > -# arch/arm/mach-s5p6440/Kconfig > -# > -# Copyright (c) 2009 Samsung Electronics Co., Ltd. > -# ? ? ? ? ? ? ?http://www.samsung.com/ > -# > -# Licensed under GPLv2 > - > -if ARCH_S5P6440 > - > -config CPU_S5P6440 > - ? ? ? bool > - ? ? ? select S3C_PL330_DMA > - ? ? ? help > - ? ? ? ? Enable S5P6440 CPU support > - > -config S5P6440_SETUP_I2C1 > - ? ? ? bool > - ? ? ? help > - ? ? ? ? Common setup code for i2c bus 1. > - > -config MACH_SMDK6440 > - ? ? ? bool "SMDK6440" > - ? ? ? select CPU_S5P6440 > - ? ? ? select S3C_DEV_I2C1 > - ? ? ? select S3C_DEV_RTC > - ? ? ? select S3C_DEV_WDT > - ? ? ? select SAMSUNG_DEV_ADC > - ? ? ? select SAMSUNG_DEV_TS > - ? ? ? select S5P6440_SETUP_I2C1 > - ? ? ? help > - ? ? ? ? Machine support for the Samsung SMDK6440 > - > -endif > diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile > deleted file mode 100644 > index c3fe4d3..0000000 > --- a/arch/arm/mach-s5p6440/Makefile > +++ /dev/null > @@ -1,25 +0,0 @@ > -# arch/arm/mach-s5p6440/Makefile > -# > -# Copyright (c) 2009 Samsung Electronics Co., Ltd. > -# ? ? ? ? ? ? ?http://www.samsung.com/ > -# > -# Licensed under GPLv2 > - > -obj-y ? ? ? ? ? ? ? ? ? ? ? ? ?:= > -obj-m ? ? ? ? ? ? ? ? ? ? ? ? ?:= > -obj-n ? ? ? ? ? ? ? ? ? ? ? ? ?:= > -obj- ? ? ? ? ? ? ? ? ? ? ? ? ? := > - > -# Core support for S5P6440 system > - > -obj-$(CONFIG_CPU_S5P6440) ? ? ?+= cpu.o init.o clock.o gpio.o dma.o > -obj-$(CONFIG_CPU_S5P6440) ? ? ?+= setup-i2c0.o > - > -# machine support > - > -obj-$(CONFIG_MACH_SMDK6440) ? ?+= mach-smdk6440.o > - > -# device support > -obj-y ? ? ? ? ? ? ? ? ? ? ? ? ?+= dev-audio.o > -obj-$(CONFIG_S3C64XX_DEV_SPI) ?+= dev-spi.o > -obj-$(CONFIG_S5P6440_SETUP_I2C1) ? ? ? += setup-i2c1.o > diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig > new file mode 100644 > index 0000000..488375c > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/Kconfig > @@ -0,0 +1,55 @@ > +# arch/arm/mach-s5p64x0/Kconfig > +# > +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > +# ? ? ? ? ? ? ?http://www.samsung.com/ > +# > +# Licensed under GPLv2 > + > +if ARCH_S5P64X0 > + > +config CPU_S5P6440 > + ? ? ? bool > + ? ? ? select PLAT_S5P > + ? ? ? select S3C_PL330_DMA > + ? ? ? help > + ? ? ? ? Enable S5P6440 CPU support > + > +config CPU_S5P6450 > + ? ? ? bool > + ? ? ? select PLAT_S5P > + ? ? ? select S3C_PL330_DMA > + ? ? ? help > + ? ? ? ? Enable S5P6450 CPU support > + > +config S5P64X0_SETUP_I2C1 > + ? ? ? bool > + ? ? ? help > + ? ? ? ? Common setup code for i2c bus 1. > + > +# machine support > + > +config MACH_SMDK6440 > + ? ? ? bool "SMDK6440" > + ? ? ? select CPU_S5P6440 > + ? ? ? select S3C_DEV_I2C1 > + ? ? ? select S3C_DEV_RTC > + ? ? ? select S3C_DEV_WDT > + ? ? ? select SAMSUNG_DEV_ADC > + ? ? ? select SAMSUNG_DEV_TS > + ? ? ? select S5P64X0_SETUP_I2C1 > + ? ? ? help > + ? ? ? ? Machine support for the Samsung SMDK6440 > + > +config MACH_SMDK6450 > + ? ? ? bool "SMDK6450" > + ? ? ? select CPU_S5P6450 > + ? ? ? select S3C_DEV_I2C1 > + ? ? ? select S3C_DEV_RTC > + ? ? ? select S3C_DEV_WDT > + ? ? ? select SAMSUNG_DEV_ADC > + ? ? ? select SAMSUNG_DEV_TS > + ? ? ? select S5P64X0_SETUP_I2C1 > + ? ? ? help > + ? ? ? ? Machine support for the Samsung SMDK6450 In most case SMDK has almost same functionality. make a common select e.g., SMDK_COMMON and each board just select it. > + > +endif > diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile > new file mode 100644 > index 0000000..2655829 > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/Makefile > @@ -0,0 +1,30 @@ > +# arch/arm/mach-s5p64x0/Makefile > +# > +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > +# ? ? ? ? ? ? ?http://www.samsung.com > +# > +# Licensed under GPLv2 > + > +obj-y ? ? ? ? ? ? ? ? ? ? ? ? ?:= > +obj-m ? ? ? ? ? ? ? ? ? ? ? ? ?:= > +obj-n ? ? ? ? ? ? ? ? ? ? ? ? ?:= > +obj- ? ? ? ? ? ? ? ? ? ? ? ? ? := > + > +# Core support for S5P64X0 system > + > +obj-$(CONFIG_ARCH_S5P64X0) ? ? += cpu.o init.o clock.o dma.o > +obj-$(CONFIG_ARCH_S5P64X0) ? ? += setup-i2c0.o > +obj-$(CONFIG_CPU_S5P6440) ? ? ?+= clock-s5p6440.o gpio.o > +obj-$(CONFIG_CPU_S5P6450) ? ? ?+= clock-s5p6450.o > + > +# machine support > + > +obj-$(CONFIG_MACH_SMDK6440) ? ?+= mach-smdk6440.o > +obj-$(CONFIG_MACH_SMDK6450) ? ?+= mach-smdk6450.o Are there difference between smdk6440 and smdk6450 except the SOC? If no, how about to make a single file as pxa or omap does? Thank you, Kyungmin Park > + > +# device support > + > +obj-y ? ? ? ? ? ? ? ? ? ? ? ? ?+= dev-audio.o > +obj-$(CONFIG_S3C64XX_DEV_SPI) ?+= dev-spi.o > + > +obj-$(CONFIG_S5P64X0_SETUP_I2C1) ? ? ? += setup-i2c1.o > diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot > similarity index 100% > rename from arch/arm/mach-s5p6440/Makefile.boot > rename to arch/arm/mach-s5p64x0/Makefile.boot > diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig > index c6a855d..90f97d6 100644 > --- a/arch/arm/plat-s5p/Kconfig > +++ b/arch/arm/plat-s5p/Kconfig > @@ -7,7 +7,7 @@ > > ?config PLAT_S5P > ? ? ? ?bool > - ? ? ? depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) > + ? ? ? depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) > ? ? ? ?default y > ? ? ? ?select ARM_VIC if !ARCH_S5PV310 > ? ? ? ?select ARM_GIC if ARCH_S5PV310 > @@ -30,7 +30,7 @@ config S5P_EXT_INT > ? ? ? ?bool > ? ? ? ?help > ? ? ? ? ?Use the external interrupts (other than GPIO interrupts.) > - ? ? ? ? Note: Do not choose this for S5P6440. > + ? ? ? ? Note: Do not choose this for S5P6440 and S5P6450. > > ?config S5P_DEV_FIMC0 > ? ? ? ?bool > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at ?http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* RE: [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile 2010-09-01 9:47 ` Kyungmin Park @ 2010-09-02 8:25 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 8:25 UTC (permalink / raw) To: 'Kyungmin Park'; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux Kyungmin Park wrote: > > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 > > machines. It also updates arch/arm/ Kconfig and Makefile to include for > > support ARCH_S5P64X0 with one kernel image. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > --- > > arch/arm/Kconfig | 16 +++--- > > arch/arm/Makefile | 2 +- > > arch/arm/mach-s5p6440/Kconfig | 33 ------------ > > arch/arm/mach-s5p6440/Makefile | 25 --------- > > arch/arm/mach-s5p64x0/Kconfig | 55 > ++++++++++++++++++++ > > arch/arm/mach-s5p64x0/Makefile | 30 +++++++++++ > > .../{mach-s5p6440 => mach-s5p64x0}/Makefile.boot | 0 > > arch/arm/plat-s5p/Kconfig | 4 +- > > 8 files changed, 95 insertions(+), 70 deletions(-) > > delete mode 100644 arch/arm/mach-s5p6440/Kconfig > > delete mode 100644 arch/arm/mach-s5p6440/Makefile > > create mode 100644 arch/arm/mach-s5p64x0/Kconfig > > create mode 100644 arch/arm/mach-s5p64x0/Makefile > > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/Makefile.boot (100%) > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > > index a7ed21f..40e75b3 100644 > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -679,17 +679,15 @@ config ARCH_S3C64XX > > help > > Samsung S3C64XX series based systems > > > > -config ARCH_S5P6440 > > - bool "Samsung S5P6440" > > +config ARCH_S5P64X0 > > + bool "Samsung S5P6440 S5P6450" > > select CPU_V6 > > select GENERIC_GPIO > > select HAVE_CLK > > - select HAVE_S3C2410_WATCHDOG > > select ARCH_USES_GETTIMEOFFSET > > - select HAVE_S3C2410_I2C > > - select HAVE_S3C_RTC > > Why HAVE_* is deleted? > Ok...will add it. > > help > > - Samsung S5P6440 CPU based systems > > + Samsung S5P64X0 CPU based systems, such as the Samsung > SMDK6440, > > + SMDK6450. > > (snip) > > + > > +config MACH_SMDK6440 > > + bool "SMDK6440" > > + select CPU_S5P6440 > > + select S3C_DEV_I2C1 > > + select S3C_DEV_RTC > > + select S3C_DEV_WDT > > + select SAMSUNG_DEV_ADC > > + select SAMSUNG_DEV_TS > > + select S5P64X0_SETUP_I2C1 > > + help > > + Machine support for the Samsung SMDK6440 > > + > > +config MACH_SMDK6450 > > + bool "SMDK6450" > > + select CPU_S5P6450 > > + select S3C_DEV_I2C1 > > + select S3C_DEV_RTC > > + select S3C_DEV_WDT > > + select SAMSUNG_DEV_ADC > > + select SAMSUNG_DEV_TS > > + select S5P64X0_SETUP_I2C1 > > + help > > + Machine support for the Samsung SMDK6450 > > In most case SMDK has almost same functionality. make a common select > e.g., SMDK_COMMON and each board just select it. If required, will sort out next time with other architectures. (snip) > > + > > +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o > > +obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o > Are there difference between smdk6440 and smdk6450 except the SOC? > If no, how about to make a single file as pxa or omap does? > Because each components on the board are different, SMDK6440 and SMDK6450 need each machine file... (snip) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile @ 2010-09-02 8:25 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 8:25 UTC (permalink / raw) To: linux-arm-kernel Kyungmin Park wrote: > > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 > > machines. It also updates arch/arm/ Kconfig and Makefile to include for > > support ARCH_S5P64X0 with one kernel image. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > --- > > ?arch/arm/Kconfig ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 16 +++--- > > ?arch/arm/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?2 +- > > ?arch/arm/mach-s5p6440/Kconfig ? ? ? ? ? ? ? ? ? ? ?| ? 33 ------------ > > ?arch/arm/mach-s5p6440/Makefile ? ? ? ? ? ? ? ? ? ? | ? 25 --------- > > ?arch/arm/mach-s5p64x0/Kconfig ? ? ? ? ? ? ? ? ? ? ?| ? 55 > ++++++++++++++++++++ > > ?arch/arm/mach-s5p64x0/Makefile ? ? ? ? ? ? ? ? ? ? | ? 30 +++++++++++ > > ?.../{mach-s5p6440 => mach-s5p64x0}/Makefile.boot ? | ? ?0 > > ?arch/arm/plat-s5p/Kconfig ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?4 +- > > ?8 files changed, 95 insertions(+), 70 deletions(-) > > ?delete mode 100644 arch/arm/mach-s5p6440/Kconfig > > ?delete mode 100644 arch/arm/mach-s5p6440/Makefile > > ?create mode 100644 arch/arm/mach-s5p64x0/Kconfig > > ?create mode 100644 arch/arm/mach-s5p64x0/Makefile > > ?rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/Makefile.boot (100%) > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > > index a7ed21f..40e75b3 100644 > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -679,17 +679,15 @@ config ARCH_S3C64XX > > ? ? ? ?help > > ? ? ? ? ?Samsung S3C64XX series based systems > > > > -config ARCH_S5P6440 > > - ? ? ? bool "Samsung S5P6440" > > +config ARCH_S5P64X0 > > + ? ? ? bool "Samsung S5P6440 S5P6450" > > ? ? ? ?select CPU_V6 > > ? ? ? ?select GENERIC_GPIO > > ? ? ? ?select HAVE_CLK > > - ? ? ? select HAVE_S3C2410_WATCHDOG > > ? ? ? ?select ARCH_USES_GETTIMEOFFSET > > - ? ? ? select HAVE_S3C2410_I2C > > - ? ? ? select HAVE_S3C_RTC > > Why HAVE_* is deleted? > Ok...will add it. > > ? ? ? ?help > > - ? ? ? ? Samsung S5P6440 CPU based systems > > + ? ? ? ? Samsung S5P64X0 CPU based systems, such as the Samsung > SMDK6440, > > + ? ? ? ? SMDK6450. > > (snip) > > + > > +config MACH_SMDK6440 > > + ? ? ? bool "SMDK6440" > > + ? ? ? select CPU_S5P6440 > > + ? ? ? select S3C_DEV_I2C1 > > + ? ? ? select S3C_DEV_RTC > > + ? ? ? select S3C_DEV_WDT > > + ? ? ? select SAMSUNG_DEV_ADC > > + ? ? ? select SAMSUNG_DEV_TS > > + ? ? ? select S5P64X0_SETUP_I2C1 > > + ? ? ? help > > + ? ? ? ? Machine support for the Samsung SMDK6440 > > + > > +config MACH_SMDK6450 > > + ? ? ? bool "SMDK6450" > > + ? ? ? select CPU_S5P6450 > > + ? ? ? select S3C_DEV_I2C1 > > + ? ? ? select S3C_DEV_RTC > > + ? ? ? select S3C_DEV_WDT > > + ? ? ? select SAMSUNG_DEV_ADC > > + ? ? ? select SAMSUNG_DEV_TS > > + ? ? ? select S5P64X0_SETUP_I2C1 > > + ? ? ? help > > + ? ? ? ? Machine support for the Samsung SMDK6450 > > In most case SMDK has almost same functionality. make a common select > e.g., SMDK_COMMON and each board just select it. If required, will sort out next time with other architectures. (snip) > > + > > +obj-$(CONFIG_MACH_SMDK6440) ? ?+= mach-smdk6440.o > > +obj-$(CONFIG_MACH_SMDK6450) ? ?+= mach-smdk6450.o > Are there difference between smdk6440 and smdk6450 except the SOC? > If no, how about to make a single file as pxa or omap does? > Because each components on the board are different, SMDK6440 and SMDK6450 need each machine file... (snip) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 03/13] ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with one kernel image. So moved some files of mach-s5p6440 into the new ARCH directory mach-s5p64x0. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/cpu.c | 145 ------------- arch/arm/mach-s5p6440/include/mach/debug-macro.S | 37 ---- arch/arm/mach-s5p6440/include/mach/io.h | 18 -- arch/arm/mach-s5p6440/include/mach/map.h | 81 -------- arch/arm/mach-s5p6440/include/mach/uncompress.h | 24 --- arch/arm/mach-s5p6440/init.c | 52 ----- arch/arm/mach-s5p64x0/cpu.c | 208 +++++++++++++++++++ arch/arm/mach-s5p64x0/include/mach/debug-macro.S | 39 ++++ .../include/mach/entry-macro.S | 8 +- .../include/mach/hardware.h | 8 +- arch/arm/mach-s5p64x0/include/mach/io.h | 25 +++ arch/arm/mach-s5p64x0/include/mach/map.h | 83 ++++++++ .../include/mach/memory.h | 12 +- .../include/mach/system.h | 8 +- .../include/mach/timex.h | 7 +- arch/arm/mach-s5p64x0/include/mach/uncompress.h | 212 ++++++++++++++++++++ .../include/mach/vmalloc.h | 5 +- arch/arm/mach-s5p64x0/init.c | 73 +++++++ arch/arm/plat-s5p/cpu.c | 12 +- arch/arm/plat-s5p/include/plat/s5p6440.h | 7 +- arch/arm/plat-s5p/include/plat/s5p6450.h | 36 ++++ 21 files changed, 717 insertions(+), 383 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/cpu.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-s5p6440/include/mach/io.h delete mode 100644 arch/arm/mach-s5p6440/include/mach/map.h delete mode 100644 arch/arm/mach-s5p6440/include/mach/uncompress.h delete mode 100644 arch/arm/mach-s5p6440/init.c create mode 100644 arch/arm/mach-s5p64x0/cpu.c create mode 100644 arch/arm/mach-s5p64x0/include/mach/debug-macro.S rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/entry-macro.S (58%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/hardware.h (67%) create mode 100644 arch/arm/mach-s5p64x0/include/mach/io.h create mode 100644 arch/arm/mach-s5p64x0/include/mach/map.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/memory.h (55%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/system.h (69%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/timex.h (80%) create mode 100644 arch/arm/mach-s5p64x0/include/mach/uncompress.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/vmalloc.h (74%) create mode 100644 arch/arm/mach-s5p64x0/init.c create mode 100644 arch/arm/plat-s5p/include/plat/s5p6450.h diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c deleted file mode 100644 index a3c33d9..0000000 --- a/arch/arm/mach-s5p6440/cpu.c +++ /dev/null @@ -1,145 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/cpu.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6440.h> -#include <plat/adc-core.h> - -/* Initial IO mappings */ - -static struct map_desc s5p6440_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P6440_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P6440_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P6440_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - } -}; - -static void s5p6440_idle(void) -{ - unsigned long val; - - if (!need_resched()) { - val = __raw_readl(S5P_PWR_CFG); - val &= ~(0x3<<5); - val |= (0x1<<5); - __raw_writel(val, S5P_PWR_CFG); - - cpu_do_idle(); - } - local_irq_enable(); -} - -/* - * s5p6440_map_io - * - * register the standard cpu IO areas - */ - -void __init s5p6440_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - - iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); -} - -void __init s5p6440_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6440_register_clocks(); - s5p6440_setup_clocks(); -} - -void __init s5p6440_init_irq(void) -{ - /* S5P6440 supports only 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] - * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] - */ - vic[0] = 0xff800ae7; - vic[1] = 0xffbf23e5; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6440_sysclass = { - .name = "s5p6440-core", -}; - -static struct sys_device s5p6440_sysdev = { - .cls = &s5p6440_sysclass, -}; - -static int __init s5p6440_core_init(void) -{ - return sysdev_class_register(&s5p6440_sysclass); -} - -core_initcall(s5p6440_core_init); - -int __init s5p6440_init(void) -{ - printk(KERN_INFO "S5P6440: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6440_idle; - - return sysdev_register(&s5p6440_sysdev); -} diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S deleted file mode 100644 index 1347d7f..0000000 --- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h deleted file mode 100644 index fa2d69c..0000000 --- a/arch/arm/mach-s5p6440/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5p6440/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C64XX based - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h deleted file mode 100644 index 11d31fe..0000000 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ /dev/null @@ -1,81 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/map.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P6440_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P6440_PA_CHIPID - -#define S5P6440_PA_SYSCON (0xE0100000) -#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0) -#define S5P_PA_SYSCON S5P6440_PA_SYSCON - -#define S5P6440_PA_GPIO (0xE0308000) - -#define S5P6440_PA_VIC0 (0xE4000000) -#define S5P6440_PA_VIC1 (0xE4100000) - -#define S5P6440_PA_PDMA 0xE9000000 - -#define S5P6440_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P6440_PA_TIMER - -#define S5P6440_PA_RTC (0xEA100000) - -#define S5P6440_PA_WDT (0xEA200000) - -#define S5P6440_PA_UART (0xEC000000) - -#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0) -#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400) -#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800) -#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00) - -#define S5P_SZ_UART SZ_256 - -#define S5P6440_PA_IIC0 (0xEC104000) -#define S5P6440_PA_IIC1 (0xEC20F000) - -#define S5P6440_PA_SPI0 0xEC400000 -#define S5P6440_PA_SPI1 0xEC500000 - -#define S5P6440_PA_HSOTG (0xED100000) - -#define S5P6440_PA_HSMMC0 (0xED800000) -#define S5P6440_PA_HSMMC1 (0xED900000) -#define S5P6440_PA_HSMMC2 (0xEDA00000) - -#define S5P6440_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5P6440_PA_SDRAM - -/* I2S */ -#define S5P6440_PA_I2S 0xF2000000 - -/* PCM */ -#define S5P6440_PA_PCM 0xF2100000 - -#define S5P6440_PA_ADC (0xF3000000) - -/* compatibiltiy defines. */ -#define S3C_PA_UART S5P6440_PA_UART -#define S3C_PA_IIC S5P6440_PA_IIC0 -#define S3C_PA_RTC S5P6440_PA_RTC -#define S3C_PA_IIC1 S5P6440_PA_IIC1 -#define S3C_PA_WDT S5P6440_PA_WDT - -#define SAMSUNG_PA_ADC S5P6440_PA_ADC - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h deleted file mode 100644 index 7c1f600..0000000 --- a/arch/arm/mach-s5p6440/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c deleted file mode 100644 index a1f3727..0000000 --- a/arch/arm/mach-s5p6440/init.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/init.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Init support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6440.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { - [0] = { - .name = "pclk_low", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6440_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c new file mode 100644 index 0000000..fb90a30 --- /dev/null +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -0,0 +1,208 @@ +/* linux/arch/arm/mach-s5p64x0/cpu.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/proc-fns.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/adc-core.h> + +/* Initial IO mappings */ + +static struct map_desc s5p64x0_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6450_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART + SZ_512K, + .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void s5p64x0_idle(void) +{ + unsigned long val; + + if (!need_resched()) { + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); + + cpu_do_idle(); + } + local_irq_enable(); +} + +/* + * s5p64x0_map_io + * + * register the standard CPU IO areas + */ + +void __init s5p6440_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64x0-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +void __init s5p6450_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64x0-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +/* + * s5p64x0_init_clocks + * + * register and setup the CPU clocks + */ + +void __init s5p6440_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6440_register_clocks(); + s5p6440_setup_clocks(); +} + +void __init s5p6450_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6450_register_clocks(); + s5p6450_setup_clocks(); +} + +/* + * s5p64x0_init_irq + * + * register the CPU interrupts + */ + +void __init s5p6440_init_irq(void) +{ + /* S5P6440 supports 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] + * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] + */ + vic[0] = 0xff800ae7; + vic[1] = 0xffbf23e5; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +void __init s5p6450_init_irq(void) +{ + /* S5P6450 supports only 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] + * VIC1 is missing IRQ VIC1[12, 14, 23] + */ + vic[0] = 0xff9f1fff; + vic[1] = 0xff7fafff; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +struct sysdev_class s5p64x0_sysclass = { + .name = "s5p64x0-core", +}; + +static struct sys_device s5p64x0_sysdev = { + .cls = &s5p64x0_sysclass, +}; + +static int __init s5p64x0_core_init(void) +{ + return sysdev_class_register(&s5p64x0_sysclass); +} +core_initcall(s5p64x0_core_init); + +int __init s5p64x0_init(void) +{ + printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p64x0_idle; + + return sysdev_register(&s5p64x0_sysdev); +} diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S new file mode 100644 index 0000000..f122baa --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -0,0 +1,39 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#include <plat/regs-serial.h> + + .macro addruart, rx, tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + bne 1002f + + mov \rx, #0xE0000000 + orr \rx, \rx, #0x00100000 + ldr \rx, [\rx, #0x118 ] + and \rx, \rx, #0xff000 + teq \rx, #0x50000 @@ S5P6450 + ldreq \rx, =0xEC800000 + movne \rx, #0xEC000000 @@ S5P6440 + b 1003f + 1002: + ldrne \rx, = S3C_VA_UART + 1003: +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S similarity index 58% rename from arch/arm/mach-s5p6440/include/mach/entry-macro.S rename to arch/arm/mach-s5p64x0/include/mach/entry-macro.S index e65f1b9..10b62b4 100644 --- a/arch/arm/mach-s5p6440/include/mach/entry-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S +/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * Low-level IRQ helper macros for the Samsung S5P6440 + * Low-level IRQ helper macros for the Samsung S5P64X0 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h similarity index 67% rename from arch/arm/mach-s5p6440/include/mach/hardware.h rename to arch/arm/mach-s5p64x0/include/mach/hardware.h index be8b26e..d3e8799 100644 --- a/arch/arm/mach-s5p6440/include/mach/hardware.h +++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h +/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Hardware support + * S5P64X0 - Hardware support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h new file mode 100644 index 0000000..a3e095c --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/io.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/io.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S5P64X0 based + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h new file mode 100644 index 0000000..31e5341 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/map.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#define S5P64X0_PA_SDRAM (0x20000000) + +#define S5P64X0_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5P64X0_PA_CHIPID + +#define S5P64X0_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5P64X0_PA_SYSCON + +#define S5P64X0_PA_GPIO (0xE0308000) + +#define S5P64X0_PA_VIC0 (0xE4000000) +#define S5P64X0_PA_VIC1 (0xE4100000) + +#define S5P64X0_PA_PDMA (0xE9000000) + +#define S5P64X0_PA_TIMER (0xEA000000) +#define S5P_PA_TIMER S5P64X0_PA_TIMER + +#define S5P64X0_PA_RTC (0xEA100000) + +#define S5P64X0_PA_WDT (0xEA200000) + +#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) +#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) + +#define S5P_PA_UART0 S5P6450_PA_UART(0) +#define S5P_PA_UART1 S5P6450_PA_UART(1) +#define S5P_PA_UART2 S5P6450_PA_UART(2) +#define S5P_PA_UART3 S5P6450_PA_UART(3) +#define S5P_PA_UART4 S5P6450_PA_UART(4) +#define S5P_PA_UART5 S5P6450_PA_UART(5) + +#define S5P_SZ_UART SZ_256 + +#define S5P6440_PA_IIC0 (0xEC104000) +#define S5P6440_PA_IIC1 (0xEC20F000) +#define S5P6450_PA_IIC0 (0xEC100000) +#define S5P6450_PA_IIC1 (0xEC200000) + +#define S5P64X0_PA_SPI0 (0xEC400000) +#define S5P64X0_PA_SPI1 (0xEC500000) + +#define S5P64X0_PA_HSOTG (0xED100000) + +#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) + +#define S5P64X0_PA_I2S (0xF2000000) + +#define S5P64X0_PA_PCM (0xF2100000) + +#define S5P64X0_PA_ADC (0xF3000000) + +/* compatibiltiy defines. */ + +#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2) +#define S3C_PA_IIC S5P6440_PA_IIC0 +#define S3C_PA_IIC1 S5P6440_PA_IIC1 +#define S3C_PA_RTC S5P64X0_PA_RTC +#define S3C_PA_WDT S5P64X0_PA_WDT + +#define SAMSUNG_PA_ADC S5P64X0_PA_ADC + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h similarity index 55% rename from arch/arm/mach-s5p6440/include/mach/memory.h rename to arch/arm/mach-s5p64x0/include/mach/memory.h index d62910c..1b036b0 100644 --- a/arch/arm/mach-s5p6440/include/mach/memory.h +++ b/arch/arm/mach-s5p64x0/include/mach/memory.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/memory.h +/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Memory definitions + * S5P64X0 - Memory definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,9 +11,9 @@ */ #ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x20000000) +#define PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h similarity index 69% rename from arch/arm/mach-s5p6440/include/mach/system.h rename to arch/arm/mach-s5p64x0/include/mach/system.h index a359ee3..60f5753 100644 --- a/arch/arm/mach-s5p6440/include/mach/system.h +++ b/arch/arm/mach-s5p64x0/include/mach/system.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/system.h +/* linux/arch/arm/mach-s5p64x0/include/mach/system.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - system support header + * S5P64X0 - system support header * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h similarity index 80% rename from arch/arm/mach-s5p6440/include/mach/timex.h rename to arch/arm/mach-s5p64x0/include/mach/timex.h index fb2e8cd..4b91faa 100644 --- a/arch/arm/mach-s5p6440/include/mach/timex.h +++ b/arch/arm/mach-s5p64x0/include/mach/timex.h @@ -1,9 +1,12 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h +/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C6400 - time parameters + * S5P64X0 - time parameters * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h new file mode 100644 index 0000000..c65b229 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h @@ -0,0 +1,212 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> + +/* + * cannot use commonly <plat/uncompress.h> + * because uart base of S5P6440 and S5P6450 is different + */ + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include <plat/regs-serial.h> +#include <plat/regs-watchdog.h> + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +static unsigned long uart_base; + +static __inline__ void get_uart_base(void) +{ + unsigned int chipid; + + chipid = *(const volatile unsigned int __force *) 0xE0100118; + + uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT; + + if ((chipid & 0xff000) == 0x50000) + uart_base += 0xEC800000; + else + uart_base += 0xEC000000; +} + +static __inline__ void uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* + * we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... + */ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d, ad) \ + do { \ + *((volatile unsigned int __force *)(ad)) = (d); \ + } while (0) + +/* + * CONFIG_S3C_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process + */ + +#ifdef CONFIG_S3C_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO +static inline void arch_enable_uart_fifo(void) +{ + u32 fifocon = uart_rd(S3C2410_UFCON); + + if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { + fifocon |= S3C2410_UFCON_RESETBOTH; + uart_wr(S3C2410_UFCON, fifocon); + + /* wait for fifo reset to complete */ + while (1) { + fifocon = uart_rd(S3C2410_UFCON); + if (!(fifocon & S3C2410_UFCON_RESETBOTH)) + break; + } + } +} +#else +#define arch_enable_uart_fifo() do { } while(0) +#endif + +static void arch_decomp_setup(void) +{ + /* + * we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); + + /* + * Enable the UART FIFOs if they where not enabled and our + * configuration says we should turn them on. + */ + + arch_enable_uart_fifo(); +} + + + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h similarity index 74% rename from arch/arm/mach-s5p6440/include/mach/vmalloc.h rename to arch/arm/mach-s5p64x0/include/mach/vmalloc.h index e3f0eeb..97a9df3 100644 --- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h +++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h @@ -1,4 +1,7 @@ -/* arch/arm/mach-s5p6440/include/mach/vmalloc.h +/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2010 Ben Dooks <ben-linux@fluff.org> * diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c new file mode 100644 index 0000000..79833ca --- /dev/null +++ b/arch/arm/mach-s5p64x0/init.c @@ -0,0 +1,73 @@ +/* linux/arch/arm/mach-s5p64x0/init.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Init support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = { + [0] = { + .name = "pclk_low", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ + +void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5p64x0_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks); + } + } +} + +void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + int uart; + + for (uart = 0; uart < no; uart++) { + s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); + s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; + } + + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 57f08ee..74f7f5a 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -19,6 +19,7 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> +#include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> #include <plat/s5pv310.h> @@ -27,6 +28,7 @@ static const char name_s5p6440[] = "S5P6440"; static const char name_s5p6442[] = "S5P6442"; +static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_s5pv310[] = "S5PV310"; @@ -38,7 +40,7 @@ static struct cpu_table cpu_ids[] __initdata = { .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, - .init = s5p6440_init, + .init = s5p64x0_init, .name = name_s5p6440, }, { .idcode = 0x36442000, @@ -49,6 +51,14 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p6442_init, .name = name_s5p6442, }, { + .idcode = 0x36450000, + .idmask = 0xffffff00, + .map_io = s5p6450_map_io, + .init_clocks = s5p6450_init_clocks, + .init_uarts = s5p6450_init_uarts, + .init = s5p64x0_init, + .name = name_s5p6450, + }, { .idcode = 0x43100000, .idmask = 0xfffff000, .map_io = s5pc100_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h index a4cd75a..528585d 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ b/arch/arm/plat-s5p/include/plat/s5p6440.h @@ -12,24 +12,23 @@ /* Common init code for S5P6440 related SoCs */ -extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s5p6440_register_clocks(void); extern void s5p6440_setup_clocks(void); #ifdef CONFIG_CPU_S5P6440 -extern int s5p6440_init(void); +extern int s5p64x0_init(void); extern void s5p6440_init_irq(void); extern void s5p6440_map_io(void); extern void s5p6440_init_clocks(int xtal); -#define s5p6440_init_uarts s5p6440_common_init_uarts +extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); #else #define s5p6440_init_clocks NULL #define s5p6440_init_uarts NULL #define s5p6440_map_io NULL -#define s5p6440_init NULL +#define s5p64x0_init NULL #endif /* S5P6440 timer */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h new file mode 100644 index 0000000..640a41c --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6450.h @@ -0,0 +1,36 @@ +/* arch/arm/plat-s5p/include/plat/s5p6450.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p6450 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5P6450 related SoCs */ + +extern void s5p6450_register_clocks(void); +extern void s5p6450_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6450 + +extern int s5p64x0_init(void); +extern void s5p6450_init_irq(void); +extern void s5p6450_map_io(void); +extern void s5p6450_init_clocks(int xtal); + +extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5p6450_init_clocks NULL +#define s5p6450_init_uarts NULL +#define s5p6450_map_io NULL +#define s5p64x0_init NULL +#endif + +/* S5P6450 timer */ + +extern struct sys_timer s5p6450_timer; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 03/13] ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with one kernel image. So moved some files of mach-s5p6440 into the new ARCH directory mach-s5p64x0. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/cpu.c | 145 ------------- arch/arm/mach-s5p6440/include/mach/debug-macro.S | 37 ---- arch/arm/mach-s5p6440/include/mach/io.h | 18 -- arch/arm/mach-s5p6440/include/mach/map.h | 81 -------- arch/arm/mach-s5p6440/include/mach/uncompress.h | 24 --- arch/arm/mach-s5p6440/init.c | 52 ----- arch/arm/mach-s5p64x0/cpu.c | 208 +++++++++++++++++++ arch/arm/mach-s5p64x0/include/mach/debug-macro.S | 39 ++++ .../include/mach/entry-macro.S | 8 +- .../include/mach/hardware.h | 8 +- arch/arm/mach-s5p64x0/include/mach/io.h | 25 +++ arch/arm/mach-s5p64x0/include/mach/map.h | 83 ++++++++ .../include/mach/memory.h | 12 +- .../include/mach/system.h | 8 +- .../include/mach/timex.h | 7 +- arch/arm/mach-s5p64x0/include/mach/uncompress.h | 212 ++++++++++++++++++++ .../include/mach/vmalloc.h | 5 +- arch/arm/mach-s5p64x0/init.c | 73 +++++++ arch/arm/plat-s5p/cpu.c | 12 +- arch/arm/plat-s5p/include/plat/s5p6440.h | 7 +- arch/arm/plat-s5p/include/plat/s5p6450.h | 36 ++++ 21 files changed, 717 insertions(+), 383 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/cpu.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-s5p6440/include/mach/io.h delete mode 100644 arch/arm/mach-s5p6440/include/mach/map.h delete mode 100644 arch/arm/mach-s5p6440/include/mach/uncompress.h delete mode 100644 arch/arm/mach-s5p6440/init.c create mode 100644 arch/arm/mach-s5p64x0/cpu.c create mode 100644 arch/arm/mach-s5p64x0/include/mach/debug-macro.S rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/entry-macro.S (58%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/hardware.h (67%) create mode 100644 arch/arm/mach-s5p64x0/include/mach/io.h create mode 100644 arch/arm/mach-s5p64x0/include/mach/map.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/memory.h (55%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/system.h (69%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/timex.h (80%) create mode 100644 arch/arm/mach-s5p64x0/include/mach/uncompress.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/vmalloc.h (74%) create mode 100644 arch/arm/mach-s5p64x0/init.c create mode 100644 arch/arm/plat-s5p/include/plat/s5p6450.h diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c deleted file mode 100644 index a3c33d9..0000000 --- a/arch/arm/mach-s5p6440/cpu.c +++ /dev/null @@ -1,145 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/cpu.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6440.h> -#include <plat/adc-core.h> - -/* Initial IO mappings */ - -static struct map_desc s5p6440_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P6440_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P6440_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P6440_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - } -}; - -static void s5p6440_idle(void) -{ - unsigned long val; - - if (!need_resched()) { - val = __raw_readl(S5P_PWR_CFG); - val &= ~(0x3<<5); - val |= (0x1<<5); - __raw_writel(val, S5P_PWR_CFG); - - cpu_do_idle(); - } - local_irq_enable(); -} - -/* - * s5p6440_map_io - * - * register the standard cpu IO areas - */ - -void __init s5p6440_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - - iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); -} - -void __init s5p6440_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6440_register_clocks(); - s5p6440_setup_clocks(); -} - -void __init s5p6440_init_irq(void) -{ - /* S5P6440 supports only 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] - * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] - */ - vic[0] = 0xff800ae7; - vic[1] = 0xffbf23e5; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6440_sysclass = { - .name = "s5p6440-core", -}; - -static struct sys_device s5p6440_sysdev = { - .cls = &s5p6440_sysclass, -}; - -static int __init s5p6440_core_init(void) -{ - return sysdev_class_register(&s5p6440_sysclass); -} - -core_initcall(s5p6440_core_init); - -int __init s5p6440_init(void) -{ - printk(KERN_INFO "S5P6440: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6440_idle; - - return sysdev_register(&s5p6440_sysdev); -} diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S deleted file mode 100644 index 1347d7f..0000000 --- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h deleted file mode 100644 index fa2d69c..0000000 --- a/arch/arm/mach-s5p6440/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5p6440/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C64XX based - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h deleted file mode 100644 index 11d31fe..0000000 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ /dev/null @@ -1,81 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/map.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P6440_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P6440_PA_CHIPID - -#define S5P6440_PA_SYSCON (0xE0100000) -#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0) -#define S5P_PA_SYSCON S5P6440_PA_SYSCON - -#define S5P6440_PA_GPIO (0xE0308000) - -#define S5P6440_PA_VIC0 (0xE4000000) -#define S5P6440_PA_VIC1 (0xE4100000) - -#define S5P6440_PA_PDMA 0xE9000000 - -#define S5P6440_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P6440_PA_TIMER - -#define S5P6440_PA_RTC (0xEA100000) - -#define S5P6440_PA_WDT (0xEA200000) - -#define S5P6440_PA_UART (0xEC000000) - -#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0) -#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400) -#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800) -#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00) - -#define S5P_SZ_UART SZ_256 - -#define S5P6440_PA_IIC0 (0xEC104000) -#define S5P6440_PA_IIC1 (0xEC20F000) - -#define S5P6440_PA_SPI0 0xEC400000 -#define S5P6440_PA_SPI1 0xEC500000 - -#define S5P6440_PA_HSOTG (0xED100000) - -#define S5P6440_PA_HSMMC0 (0xED800000) -#define S5P6440_PA_HSMMC1 (0xED900000) -#define S5P6440_PA_HSMMC2 (0xEDA00000) - -#define S5P6440_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5P6440_PA_SDRAM - -/* I2S */ -#define S5P6440_PA_I2S 0xF2000000 - -/* PCM */ -#define S5P6440_PA_PCM 0xF2100000 - -#define S5P6440_PA_ADC (0xF3000000) - -/* compatibiltiy defines. */ -#define S3C_PA_UART S5P6440_PA_UART -#define S3C_PA_IIC S5P6440_PA_IIC0 -#define S3C_PA_RTC S5P6440_PA_RTC -#define S3C_PA_IIC1 S5P6440_PA_IIC1 -#define S3C_PA_WDT S5P6440_PA_WDT - -#define SAMSUNG_PA_ADC S5P6440_PA_ADC - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h deleted file mode 100644 index 7c1f600..0000000 --- a/arch/arm/mach-s5p6440/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c deleted file mode 100644 index a1f3727..0000000 --- a/arch/arm/mach-s5p6440/init.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/init.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Init support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6440.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { - [0] = { - .name = "pclk_low", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6440_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c new file mode 100644 index 0000000..fb90a30 --- /dev/null +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -0,0 +1,208 @@ +/* linux/arch/arm/mach-s5p64x0/cpu.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/proc-fns.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/adc-core.h> + +/* Initial IO mappings */ + +static struct map_desc s5p64x0_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6450_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART + SZ_512K, + .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void s5p64x0_idle(void) +{ + unsigned long val; + + if (!need_resched()) { + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); + + cpu_do_idle(); + } + local_irq_enable(); +} + +/* + * s5p64x0_map_io + * + * register the standard CPU IO areas + */ + +void __init s5p6440_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64x0-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +void __init s5p6450_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64x0-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +/* + * s5p64x0_init_clocks + * + * register and setup the CPU clocks + */ + +void __init s5p6440_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6440_register_clocks(); + s5p6440_setup_clocks(); +} + +void __init s5p6450_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6450_register_clocks(); + s5p6450_setup_clocks(); +} + +/* + * s5p64x0_init_irq + * + * register the CPU interrupts + */ + +void __init s5p6440_init_irq(void) +{ + /* S5P6440 supports 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] + * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] + */ + vic[0] = 0xff800ae7; + vic[1] = 0xffbf23e5; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +void __init s5p6450_init_irq(void) +{ + /* S5P6450 supports only 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] + * VIC1 is missing IRQ VIC1[12, 14, 23] + */ + vic[0] = 0xff9f1fff; + vic[1] = 0xff7fafff; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +struct sysdev_class s5p64x0_sysclass = { + .name = "s5p64x0-core", +}; + +static struct sys_device s5p64x0_sysdev = { + .cls = &s5p64x0_sysclass, +}; + +static int __init s5p64x0_core_init(void) +{ + return sysdev_class_register(&s5p64x0_sysclass); +} +core_initcall(s5p64x0_core_init); + +int __init s5p64x0_init(void) +{ + printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p64x0_idle; + + return sysdev_register(&s5p64x0_sysdev); +} diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S new file mode 100644 index 0000000..f122baa --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -0,0 +1,39 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#include <plat/regs-serial.h> + + .macro addruart, rx, tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + bne 1002f + + mov \rx, #0xE0000000 + orr \rx, \rx, #0x00100000 + ldr \rx, [\rx, #0x118 ] + and \rx, \rx, #0xff000 + teq \rx, #0x50000 @@ S5P6450 + ldreq \rx, =0xEC800000 + movne \rx, #0xEC000000 @@ S5P6440 + b 1003f + 1002: + ldrne \rx, = S3C_VA_UART + 1003: +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S similarity index 58% rename from arch/arm/mach-s5p6440/include/mach/entry-macro.S rename to arch/arm/mach-s5p64x0/include/mach/entry-macro.S index e65f1b9..10b62b4 100644 --- a/arch/arm/mach-s5p6440/include/mach/entry-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S +/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * Low-level IRQ helper macros for the Samsung S5P6440 + * Low-level IRQ helper macros for the Samsung S5P64X0 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h similarity index 67% rename from arch/arm/mach-s5p6440/include/mach/hardware.h rename to arch/arm/mach-s5p64x0/include/mach/hardware.h index be8b26e..d3e8799 100644 --- a/arch/arm/mach-s5p6440/include/mach/hardware.h +++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h +/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Hardware support + * S5P64X0 - Hardware support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h new file mode 100644 index 0000000..a3e095c --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/io.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/io.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S5P64X0 based + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h new file mode 100644 index 0000000..31e5341 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/map.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#define S5P64X0_PA_SDRAM (0x20000000) + +#define S5P64X0_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5P64X0_PA_CHIPID + +#define S5P64X0_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5P64X0_PA_SYSCON + +#define S5P64X0_PA_GPIO (0xE0308000) + +#define S5P64X0_PA_VIC0 (0xE4000000) +#define S5P64X0_PA_VIC1 (0xE4100000) + +#define S5P64X0_PA_PDMA (0xE9000000) + +#define S5P64X0_PA_TIMER (0xEA000000) +#define S5P_PA_TIMER S5P64X0_PA_TIMER + +#define S5P64X0_PA_RTC (0xEA100000) + +#define S5P64X0_PA_WDT (0xEA200000) + +#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) +#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) + +#define S5P_PA_UART0 S5P6450_PA_UART(0) +#define S5P_PA_UART1 S5P6450_PA_UART(1) +#define S5P_PA_UART2 S5P6450_PA_UART(2) +#define S5P_PA_UART3 S5P6450_PA_UART(3) +#define S5P_PA_UART4 S5P6450_PA_UART(4) +#define S5P_PA_UART5 S5P6450_PA_UART(5) + +#define S5P_SZ_UART SZ_256 + +#define S5P6440_PA_IIC0 (0xEC104000) +#define S5P6440_PA_IIC1 (0xEC20F000) +#define S5P6450_PA_IIC0 (0xEC100000) +#define S5P6450_PA_IIC1 (0xEC200000) + +#define S5P64X0_PA_SPI0 (0xEC400000) +#define S5P64X0_PA_SPI1 (0xEC500000) + +#define S5P64X0_PA_HSOTG (0xED100000) + +#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) + +#define S5P64X0_PA_I2S (0xF2000000) + +#define S5P64X0_PA_PCM (0xF2100000) + +#define S5P64X0_PA_ADC (0xF3000000) + +/* compatibiltiy defines. */ + +#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2) +#define S3C_PA_IIC S5P6440_PA_IIC0 +#define S3C_PA_IIC1 S5P6440_PA_IIC1 +#define S3C_PA_RTC S5P64X0_PA_RTC +#define S3C_PA_WDT S5P64X0_PA_WDT + +#define SAMSUNG_PA_ADC S5P64X0_PA_ADC + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h similarity index 55% rename from arch/arm/mach-s5p6440/include/mach/memory.h rename to arch/arm/mach-s5p64x0/include/mach/memory.h index d62910c..1b036b0 100644 --- a/arch/arm/mach-s5p6440/include/mach/memory.h +++ b/arch/arm/mach-s5p64x0/include/mach/memory.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/memory.h +/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Memory definitions + * S5P64X0 - Memory definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,9 +11,9 @@ */ #ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x20000000) +#define PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h similarity index 69% rename from arch/arm/mach-s5p6440/include/mach/system.h rename to arch/arm/mach-s5p64x0/include/mach/system.h index a359ee3..60f5753 100644 --- a/arch/arm/mach-s5p6440/include/mach/system.h +++ b/arch/arm/mach-s5p64x0/include/mach/system.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/system.h +/* linux/arch/arm/mach-s5p64x0/include/mach/system.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - system support header + * S5P64X0 - system support header * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h similarity index 80% rename from arch/arm/mach-s5p6440/include/mach/timex.h rename to arch/arm/mach-s5p64x0/include/mach/timex.h index fb2e8cd..4b91faa 100644 --- a/arch/arm/mach-s5p6440/include/mach/timex.h +++ b/arch/arm/mach-s5p64x0/include/mach/timex.h @@ -1,9 +1,12 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h +/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C6400 - time parameters + * S5P64X0 - time parameters * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h new file mode 100644 index 0000000..c65b229 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h @@ -0,0 +1,212 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> + +/* + * cannot use commonly <plat/uncompress.h> + * because uart base of S5P6440 and S5P6450 is different + */ + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include <plat/regs-serial.h> +#include <plat/regs-watchdog.h> + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +static unsigned long uart_base; + +static __inline__ void get_uart_base(void) +{ + unsigned int chipid; + + chipid = *(const volatile unsigned int __force *) 0xE0100118; + + uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT; + + if ((chipid & 0xff000) == 0x50000) + uart_base += 0xEC800000; + else + uart_base += 0xEC000000; +} + +static __inline__ void uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* + * we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... + */ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d, ad) \ + do { \ + *((volatile unsigned int __force *)(ad)) = (d); \ + } while (0) + +/* + * CONFIG_S3C_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process + */ + +#ifdef CONFIG_S3C_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO +static inline void arch_enable_uart_fifo(void) +{ + u32 fifocon = uart_rd(S3C2410_UFCON); + + if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { + fifocon |= S3C2410_UFCON_RESETBOTH; + uart_wr(S3C2410_UFCON, fifocon); + + /* wait for fifo reset to complete */ + while (1) { + fifocon = uart_rd(S3C2410_UFCON); + if (!(fifocon & S3C2410_UFCON_RESETBOTH)) + break; + } + } +} +#else +#define arch_enable_uart_fifo() do { } while(0) +#endif + +static void arch_decomp_setup(void) +{ + /* + * we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); + + /* + * Enable the UART FIFOs if they where not enabled and our + * configuration says we should turn them on. + */ + + arch_enable_uart_fifo(); +} + + + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h similarity index 74% rename from arch/arm/mach-s5p6440/include/mach/vmalloc.h rename to arch/arm/mach-s5p64x0/include/mach/vmalloc.h index e3f0eeb..97a9df3 100644 --- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h +++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h @@ -1,4 +1,7 @@ -/* arch/arm/mach-s5p6440/include/mach/vmalloc.h +/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2010 Ben Dooks <ben-linux@fluff.org> * diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c new file mode 100644 index 0000000..79833ca --- /dev/null +++ b/arch/arm/mach-s5p64x0/init.c @@ -0,0 +1,73 @@ +/* linux/arch/arm/mach-s5p64x0/init.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Init support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = { + [0] = { + .name = "pclk_low", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ + +void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5p64x0_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks); + } + } +} + +void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + int uart; + + for (uart = 0; uart < no; uart++) { + s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); + s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; + } + + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 57f08ee..74f7f5a 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -19,6 +19,7 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> +#include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> #include <plat/s5pv310.h> @@ -27,6 +28,7 @@ static const char name_s5p6440[] = "S5P6440"; static const char name_s5p6442[] = "S5P6442"; +static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_s5pv310[] = "S5PV310"; @@ -38,7 +40,7 @@ static struct cpu_table cpu_ids[] __initdata = { .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, - .init = s5p6440_init, + .init = s5p64x0_init, .name = name_s5p6440, }, { .idcode = 0x36442000, @@ -49,6 +51,14 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p6442_init, .name = name_s5p6442, }, { + .idcode = 0x36450000, + .idmask = 0xffffff00, + .map_io = s5p6450_map_io, + .init_clocks = s5p6450_init_clocks, + .init_uarts = s5p6450_init_uarts, + .init = s5p64x0_init, + .name = name_s5p6450, + }, { .idcode = 0x43100000, .idmask = 0xfffff000, .map_io = s5pc100_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h index a4cd75a..528585d 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ b/arch/arm/plat-s5p/include/plat/s5p6440.h @@ -12,24 +12,23 @@ /* Common init code for S5P6440 related SoCs */ -extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s5p6440_register_clocks(void); extern void s5p6440_setup_clocks(void); #ifdef CONFIG_CPU_S5P6440 -extern int s5p6440_init(void); +extern int s5p64x0_init(void); extern void s5p6440_init_irq(void); extern void s5p6440_map_io(void); extern void s5p6440_init_clocks(int xtal); -#define s5p6440_init_uarts s5p6440_common_init_uarts +extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); #else #define s5p6440_init_clocks NULL #define s5p6440_init_uarts NULL #define s5p6440_map_io NULL -#define s5p6440_init NULL +#define s5p64x0_init NULL #endif /* S5P6440 timer */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h new file mode 100644 index 0000000..640a41c --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6450.h @@ -0,0 +1,36 @@ +/* arch/arm/plat-s5p/include/plat/s5p6450.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p6450 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5P6450 related SoCs */ + +extern void s5p6450_register_clocks(void); +extern void s5p6450_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6450 + +extern int s5p64x0_init(void); +extern void s5p6450_init_irq(void); +extern void s5p6450_map_io(void); +extern void s5p6450_init_clocks(int xtal); + +extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5p6450_init_clocks NULL +#define s5p6450_init_uarts NULL +#define s5p6450_map_io NULL +#define s5p64x0_init NULL +#endif + +/* S5P6450 timer */ + +extern struct sys_timer s5p6450_timer; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 04/13] ARM: S5P64X0: Update Clock for S5P6440 and S5P6450 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch updates regarding clock files for supporting S5P6440 and S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common of them and there are specific clock files for each SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/clock.c | 846 -------------------- arch/arm/mach-s5p6440/include/mach/regs-clock.h | 130 --- arch/arm/mach-s5p64x0/clock-s5p6440.c | 626 +++++++++++++++ arch/arm/mach-s5p64x0/clock-s5p6450.c | 655 +++++++++++++++ arch/arm/mach-s5p64x0/clock.c | 253 ++++++ arch/arm/mach-s5p64x0/include/mach/regs-clock.h | 63 ++ arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h | 46 ++ arch/arm/plat-s5p/clock.c | 19 + arch/arm/plat-s5p/include/plat/pll.h | 7 + arch/arm/plat-s5p/include/plat/s5p-clock.h | 8 +- 10 files changed, 1674 insertions(+), 979 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/clock.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/regs-clock.h create mode 100644 arch/arm/mach-s5p64x0/clock-s5p6440.c create mode 100644 arch/arm/mach-s5p64x0/clock-s5p6450.c create mode 100644 arch/arm/mach-s5p64x0/clock.c create mode 100644 arch/arm/mach-s5p64x0/include/mach/regs-clock.h create mode 100644 arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c deleted file mode 100644 index ca6e48d..0000000 --- a/arch/arm/mach-s5p6440/clock.c +++ /dev/null @@ -1,846 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/clock.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p-clock.h> -#include <plat/pll.h> -#include <plat/s5p6440.h> - -/* APLL Mux output clock */ -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static int s5p6440_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -static unsigned long s5p6440_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static u32 epll_div[][5] = { - { 36000000, 0, 48, 1, 4 }, - { 48000000, 0, 32, 1, 3 }, - { 60000000, 0, 40, 1, 3 }, - { 72000000, 0, 48, 1, 3 }, - { 84000000, 0, 28, 1, 2 }, - { 96000000, 0, 32, 1, 2 }, - { 32768000, 45264, 43, 1, 4 }, - { 45158000, 6903, 30, 1, 3 }, - { 49152000, 50332, 32, 1, 3 }, - { 67738000, 10398, 45, 1, 3 }, - { 73728000, 9961, 49, 1, 3 } -}; - -static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P_EPLL_CON); - epll_con_k = __raw_readl(S5P_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P_EPLL_CON); - __raw_writel(epll_con_k, S5P_EPLL_CON_K); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6440_epll_ops = { - .get_rate = s5p6440_epll_get_rate, - .set_rate = s5p6440_epll_set_rate, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, -}; - -enum perf_level { - L0 = 532*1000, - L1 = 266*1000, - L2 = 133*1000, -}; - -static const u32 clock_table[][3] = { - /*{ARM_CLK, DIVarm, DIVhclk}*/ - {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, -}; - -static unsigned long s5p6440_armclk_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; - - return rate / (clkdiv + 1); -} - -static unsigned long s5p6440_armclk_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 iter; - - for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (rate > clock_table[iter][0]) - return clock_table[iter-1][0]; - } - - return clock_table[ARRAY_SIZE(clock_table) - 1][0]; -} - -static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 round_tmp; - u32 iter; - u32 clk_div0_tmp; - u32 cur_rate = clk->ops->get_rate(clk); - unsigned long flags; - - round_tmp = clk->ops->round_rate(clk, rate); - if (round_tmp == cur_rate) - return 0; - - - for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (round_tmp == clock_table[iter][0]) - break; - } - - if (iter >= ARRAY_SIZE(clock_table)) - iter = ARRAY_SIZE(clock_table) - 1; - - local_irq_save(flags); - if (cur_rate > round_tmp) { - /* Frequency Down */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - - } else { - /* Frequency Up */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - } - local_irq_restore(flags); - - clk->rate = clock_table[iter][0]; - - return 0; -} - -static struct clk_ops s5p6440_clkarm_ops = { - .get_rate = s5p6440_armclk_get_rate, - .set_rate = s5p6440_armclk_set_rate, - .round_rate = s5p6440_armclk_round_rate, -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .id = 1, - .parent = &clk_mout_apll.clk, - .ops = &s5p6440_clkarm_ops, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mpll = { - .clk = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_mpll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - .id = -1, - .parent = &clk_armclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .id = -1, - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 }, -}; - -static struct clk *clkset_hclklow_list[] = { - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_hclklow = { - .sources = clkset_hclklow_list, - .nr_sources = ARRAY_SIZE(clkset_hclklow_list), -}; - -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "hclk_low", - .id = -1, - }, - .sources = &clkset_hclklow, - .reg_src = { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "pclk_low", - .id = -1, - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -int s5p6440_clk48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5P_OTHERS); - if (enable) - val |= S5P_OTHERS_USB_SIG_MASK; - else - val &= ~S5P_OTHERS_USB_SIG_MASK; - - __raw_writel(val, S5P_OTHERS); - - local_irq_restore(flags); - - return 0; -} - -static int s5p6440_pclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); -} - -static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); -} - -static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); -} - -static int s5p6440_sclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); -} - -static int s5p6440_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable); -} - -static int s5p6440_mem_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); -} - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_mem_ctrl, - .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, - }, { - .name = "adc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIC0, - }, { - .name = "i2s_v40", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIS2, - }, { - .name = "spi", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI1, - }, { - .name = "sclk_spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, - }, { - .name = "sclk_spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, - }, { - .name = "mmc_48m", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, - }, { - .name = "mmc_48m", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, - }, { - .name = "mmc_48m", - .id = 2, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, - }, { - .name = "otg", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_USB - }, { - .name = "post", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_POST0 - }, { - .name = "lcd", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_WDT, - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_PWM, - }, { - .name = "hclk_fimgvg", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "tsi", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "pclk_fimgvg", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 31), - }, { - .name = "dmc0", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 30), - }, { - .name = "etm", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 29), - }, { - .name = "dsim", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "gps", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "pcm", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "irom", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "2d", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 8), - }, -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "gpio", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_GPIO, - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART3, - }, { - .name = "mem", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "intc", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, -}; - -static struct clk clk_iis_cd_v40 = { - .name = "iis_cdclk_v40", - .id = -1, -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", - .id = -1, -}; - -static struct clk *clkset_group1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_group1 = { - .sources = clkset_group1_list, - .nr_sources = ARRAY_SIZE(clkset_group1_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio = { - .sources = clkset_audio_list, - .nr_sources = ARRAY_SIZE(clkset_audio_list), -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5P_CLKCON_SCLK0_UART, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_post", - .id = -1, - .ctrlbit = (1 << 10), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .id = -1, - .ctrlbit = (1 << 1), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimgvg", - .id = -1, - .ctrlbit = (1 << 2), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio2", - .id = -1, - .ctrlbit = (1 << 11), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_audio, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 }, - }, -}; - -/* Clock initialisation code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -void __init_or_cpufreq s5p6440_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - - /* Set S5P6440 functions for clk_fout_epll */ - clk_fout_epll.enable = s5p6440_epll_enable; - clk_fout_epll.ops = &s5p6440_epll_ops; - - clk_48m.enable = s5p6440_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), - __raw_readl(S5P_EPLL_CON_K)); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -void __init s5p6440_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - - ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - if (ret > 0) - printk(KERN_ERR "Failed to register %u clocks\n", ret); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - (clkp->enable)(clkp, 0); - } - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h deleted file mode 100644 index c783ecc..0000000 --- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x04) -#define S5P_EPLL_LOCK S5P_CLKREG(0x08) -#define S5P_APLL_CON S5P_CLKREG(0x0C) -#define S5P_MPLL_CON S5P_CLKREG(0x10) -#define S5P_EPLL_CON S5P_CLKREG(0x14) -#define S5P_EPLL_CON_K S5P_CLKREG(0x18) -#define S5P_CLK_SRC0 S5P_CLKREG(0x1C) -#define S5P_CLK_DIV0 S5P_CLKREG(0x20) -#define S5P_CLK_DIV1 S5P_CLKREG(0x24) -#define S5P_CLK_DIV2 S5P_CLKREG(0x28) -#define S5P_CLK_OUT S5P_CLKREG(0x2C) -#define S5P_CLK_GATE_HCLK0 S5P_CLKREG(0x30) -#define S5P_CLK_GATE_PCLK S5P_CLKREG(0x34) -#define S5P_CLK_GATE_SCLK0 S5P_CLKREG(0x38) -#define S5P_CLK_GATE_MEM0 S5P_CLKREG(0x3C) -#define S5P_CLK_DIV3 S5P_CLKREG(0x40) -#define S5P_CLK_GATE_HCLK1 S5P_CLKREG(0x44) -#define S5P_CLK_GATE_SCLK1 S5P_CLKREG(0x48) -#define S5P_AHB_CON0 S5P_CLKREG(0x100) -#define S5P_CLK_SRC1 S5P_CLKREG(0x10C) -#define S5P_SWRESET S5P_CLKREG(0x114) -#define S5P_SYS_ID S5P_CLKREG(0x118) -#define S5P_SYS_OTHERS S5P_CLKREG(0x11C) -#define S5P_MEM_CFG_STAT S5P_CLKREG(0x12C) -#define S5P_PWR_CFG S5P_CLKREG(0x804) -#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0x808) -#define S5P_NORMAL_CFG S5P_CLKREG(0x810) -#define S5P_STOP_CFG S5P_CLKREG(0x814) -#define S5P_SLEEP_CFG S5P_CLKREG(0x818) -#define S5P_OSC_FREQ S5P_CLKREG(0x820) -#define S5P_OSC_STABLE S5P_CLKREG(0x824) -#define S5P_PWR_STABLE S5P_CLKREG(0x828) -#define S5P_MTC_STABLE S5P_CLKREG(0x830) -#define S5P_OTHERS S5P_CLKREG(0x900) -#define S5P_RST_STAT S5P_CLKREG(0x904) -#define S5P_WAKEUP_STAT S5P_CLKREG(0x908) -#define S5P_SLPEN S5P_CLKREG(0x930) -#define S5P_INFORM0 S5P_CLKREG(0xA00) -#define S5P_INFORM1 S5P_CLKREG(0xA04) -#define S5P_INFORM2 S5P_CLKREG(0xA08) -#define S5P_INFORM3 S5P_CLKREG(0xA0C) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_PCLK_MASK (0xf << 12) -#define S5P_CLKDIV0_PCLK_SHIFT (12) -#define S5P_CLKDIV0_HCLK_MASK (0xf << 8) -#define S5P_CLKDIV0_HCLK_SHIFT (8) -#define S5P_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S5P_CLKDIV0_ARM_MASK (0xf << 0) -#define S5P_CLKDIV0_ARM_SHIFT (0) - -/* CLKDIV3 */ -#define S5P_CLKDIV3_PCLK_LOW_MASK (0xf << 12) -#define S5P_CLKDIV3_PCLK_LOW_SHIFT (12) -#define S5P_CLKDIV3_HCLK_LOW_MASK (0xf << 8) -#define S5P_CLKDIV3_HCLK_LOW_SHIFT (8) - -/* HCLK0 GATE Registers */ -#define S5P_CLKCON_HCLK0_USB (1<<20) -#define S5P_CLKCON_HCLK0_HSMMC2 (1<<19) -#define S5P_CLKCON_HCLK0_HSMMC1 (1<<18) -#define S5P_CLKCON_HCLK0_HSMMC0 (1<<17) -#define S5P_CLKCON_HCLK0_POST0 (1<<5) - -/* HCLK1 GATE Registers */ -#define S5P_CLKCON_HCLK1_DISPCON (1<<1) - -/* PCLK GATE Registers */ -#define S5P_CLKCON_PCLK_IIS2 (1<<26) -#define S5P_CLKCON_PCLK_SPI1 (1<<22) -#define S5P_CLKCON_PCLK_SPI0 (1<<21) -#define S5P_CLKCON_PCLK_GPIO (1<<18) -#define S5P_CLKCON_PCLK_IIC0 (1<<17) -#define S5P_CLKCON_PCLK_TSADC (1<<12) -#define S5P_CLKCON_PCLK_PWM (1<<7) -#define S5P_CLKCON_PCLK_RTC (1<<6) -#define S5P_CLKCON_PCLK_WDT (1<<5) -#define S5P_CLKCON_PCLK_UART3 (1<<4) -#define S5P_CLKCON_PCLK_UART2 (1<<3) -#define S5P_CLKCON_PCLK_UART1 (1<<2) -#define S5P_CLKCON_PCLK_UART0 (1<<1) - -/* SCLK0 GATE Registers */ -#define S5P_CLKCON_SCLK0_MMC2_48 (1<<29) -#define S5P_CLKCON_SCLK0_MMC1_48 (1<<28) -#define S5P_CLKCON_SCLK0_MMC0_48 (1<<27) -#define S5P_CLKCON_SCLK0_MMC2 (1<<26) -#define S5P_CLKCON_SCLK0_MMC1 (1<<25) -#define S5P_CLKCON_SCLK0_MMC0 (1<<24) -#define S5P_CLKCON_SCLK0_SPI1_48 (1<<23) -#define S5P_CLKCON_SCLK0_SPI0_48 (1<<22) -#define S5P_CLKCON_SCLK0_SPI1 (1<<21) -#define S5P_CLKCON_SCLK0_SPI0 (1<<20) -#define S5P_CLKCON_SCLK0_UART (1<<5) - -/* SCLK1 GATE Registers */ - -/* MEM0 GATE Registers */ -#define S5P_CLKCON_MEM0_HCLK_NFCON (1<<2) - -/*OTHERS Resgister */ -#define S5P_OTHERS_USB_SIG_MASK (1<<16) -#define S5P_OTHERS_HCLK_LOW_SEL_MPLL (1<<6) - -/* Compatibility defines */ -#define ARM_CLK_DIV S5P_CLK_DIV0 -#define ARM_DIV_RATIO_SHIFT 0 -#define ARM_DIV_MASK (0xf << ARM_DIV_RATIO_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c new file mode 100644 index 0000000..cd36bd0 --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -0,0 +1,626 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6440 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> + +static u32 epll_div[][5] = { + { 36000000, 0, 48, 1, 4 }, + { 48000000, 0, 32, 1, 3 }, + { 60000000, 0, 40, 1, 3 }, + { 72000000, 0, 48, 1, 3 }, + { 84000000, 0, 28, 1, 2 }, + { 96000000, 0, 32, 1, 2 }, + { 32768000, 45264, 43, 1, 4 }, + { 45158000, 6903, 30, 1, 3 }, + { 49152000, 50332, 32, 1, 3 }, + { 67738000, 10398, 45, 1, 3 }, + { 73728000, 9961, 49, 1, 3 } +}; + +static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6440_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6440_epll_set_rate, +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + .parent = &clk_armclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_mem_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "post", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 5) + }, { + .name = "2d", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "otg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20) + }, { + .name = "irom", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "hclk_fimgvg", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "tsi", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "rtc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "pcm", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "gps", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "i2s_v40", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "dsim", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "etm", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 29), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + }, { + .name = "pclk_fimgvg", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 31), + }, { + .name = "sclk_spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "sclk_spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 23), + }, { + .name = "mmc_48m", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "mmc_48m", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "mmc_48m", + .id = 2, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 29), + }, +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk clk_iis_cd_v40 = { + .name = "iis_cdclk_v40", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_group1_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, +}; + +static struct clksrc_sources clkset_group1 = { + .sources = clkset_group1_list, + .nr_sources = ARRAY_SIZE(clkset_group1_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_audio_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +static struct clksrc_sources clkset_audio = { + .sources = clkset_audio_list, + .nr_sources = ARRAY_SIZE(clkset_audio_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_post", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimgvg", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_audio2", + .id = -1, + .ctrlbit = (1 << 11), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_audio, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, +}; + +void __init_or_cpufreq s5p6440_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned int ptr; + + /* Set S5P6440 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6440_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + + printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +void __init s5p6440_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c new file mode 100644 index 0000000..95bab7d --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -0,0 +1,655 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6450 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6450.h> + +static struct clksrc_clk clk_mout_dpll = { + .clk = { + .name = "mout_dpll", + .id = -1, + }, + .sources = &clk_src_dpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 }, +}; + +static u32 epll_div[][5] = { + { 133000000, 27307, 55, 2, 2 }, + { 100000000, 43691, 41, 2, 2 }, + { 480000000, 0, 80, 2, 0 }, +}; + +static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6450_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6450_epll_set_rate, +}; + +static struct clksrc_clk clk_dout_epll = { + .clk = { + .name = "dout_epll", + .id = -1, + .parent = &clk_mout_epll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_mout_hclk_sel = { + .clk = { + .name = "mout_hclk_sel", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 }, +}; + +static struct clk *clkset_hclk_list[] = { + &clk_mout_hclk_sel.clk, + &clk_armclk.clk, +}; + +static struct clksrc_sources clkset_hclk = { + .sources = clkset_hclk_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_list), +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + }, + .sources = &clkset_hclk, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_dout_pwm_ratio0 = { + .clk = { + .name = "clk_dout_pwm_ratio0", + .id = -1, + .parent = &clk_mout_hclk_sel.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_to_wdt_pwm = { + .clk = { + .name = "clk_pclk_to_wdt_pwm", + .id = -1, + .parent = &clk_dout_pwm_ratio0.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "usbhost", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "usbotg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "iis", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + } +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_to_wdt_pwm.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk *clkset_uart_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_mali_list[] = { + &clk_mout_epll.clk, + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clkset_mali = { + .sources = clkset_mali_list, + .nr_sources = ARRAY_SIZE(clkset_mali_list), +}; + +static struct clk *clkset_group2_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, +}; + +static struct clksrc_sources clkset_group2 = { + .sources = clkset_group2_list, + .nr_sources = ARRAY_SIZE(clkset_group2_list), +}; + +static struct clk *clkset_dispcon_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &clk_mout_dpll.clk, +}; + +static struct clksrc_sources clkset_dispcon = { + .sources = clkset_dispcon_list, + .nr_sources = ARRAY_SIZE(clkset_dispcon_list), +}; + +static struct clk *clkset_hsmmc44_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &s5p_clk_27m, + &clk_48m, +}; + +static struct clksrc_sources clkset_hsmmc44 = { + .sources = clkset_hsmmc44_list, + .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list), +}; + +static struct clk *clkset_sclk_audio0_list[] = { + [0] = &clk_dout_epll.clk, + [1] = &clk_dout_mpll.clk, + [2] = &clk_ext_xtal_mux, + [3] = NULL, + [4] = NULL, +}; + +static struct clksrc_sources clkset_sclk_audio0 = { + .sources = clkset_sclk_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), +}; + +static struct clksrc_clk clk_sclk_audio0 = { + .clk = { + .name = "audio-bus", + .id = -1, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 8), + .parent = &clk_dout_epll.clk, + }, + .sources = &clkset_sclk_audio0, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_mmc", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "aclk_mali", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_2d", + .id = -1, + .ctrlbit = (1 << 12), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_usi", + .id = -1, + .ctrlbit = (1 << 7), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_camif", + .id = -1, + .ctrlbit = (1 << 6), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_dispcon, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_hsmmc44", + .id = -1, + .ctrlbit = (1 << 30), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_hsmmc44, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_dout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_mout_hclk_sel, + &clk_dout_pwm_ratio0, + &clk_pclk_to_wdt_pwm, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, + &clk_sclk_audio0, +}; + +void __init_or_cpufreq s5p6450_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned long dpll; + unsigned int ptr; + + /* Set S5P6450 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6450_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON), + __raw_readl(S5P6450_DPLL_CON_K), pll_4650c); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_dpll.rate = dpll; + + printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz, D=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll), + print_mhz(dpll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +void __init s5p6450_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c new file mode 100644 index 0000000..523ba80 --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock.c @@ -0,0 +1,253 @@ +/* linux/arch/arm/mach-s5p64x0/clock.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> + +struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 }, +}; + +struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 }, +}; + +enum perf_level { + L0 = 532*1000, + L1 = 266*1000, + L2 = 133*1000, +}; + +static const u32 clock_table[][3] = { + /*{ARM_CLK, DIVarm, DIVhclk}*/ + {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, +}; + +int s5p64x0_epll_enable(struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit; + + if (enable) + __raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON); + else + __raw_writel(epll_con, S5P64X0_EPLL_CON); + + return 0; +} + +unsigned long s5p64x0_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +unsigned long s5p64x0_armclk_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; + + return rate / (clkdiv + 1); +} + +unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) +{ + u32 iter; + + for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (rate > clock_table[iter][0]) + return clock_table[iter-1][0]; + } + + return clock_table[ARRAY_SIZE(clock_table) - 1][0]; +} + +int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 round_tmp; + u32 iter; + u32 clk_div0_tmp; + u32 cur_rate = clk->ops->get_rate(clk); + unsigned long flags; + + round_tmp = clk->ops->round_rate(clk, rate); + if (round_tmp == cur_rate) + return 0; + + + for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (round_tmp == clock_table[iter][0]) + break; + } + + if (iter >= ARRAY_SIZE(clock_table)) + iter = ARRAY_SIZE(clock_table) - 1; + + local_irq_save(flags); + if (cur_rate > round_tmp) { + /* Frequency Down */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + + } else { + /* Frequency Up */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + } + local_irq_restore(flags); + + clk->rate = clock_table[iter][0]; + + return 0; +} + +struct clk_ops s5p64x0_clkarm_ops = { + .get_rate = s5p64x0_armclk_get_rate, + .set_rate = s5p64x0_armclk_set_rate, + .round_rate = s5p64x0_armclk_round_rate, +}; + +struct clksrc_clk clk_armclk = { + .clk = { + .name = "armclk", + .id = 1, + .parent = &clk_mout_apll.clk, + .ops = &s5p64x0_clkarm_ops, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 }, +}; + +struct clksrc_clk clk_dout_mpll = { + .clk = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, +}; + +struct clk *clkset_hclk_low_list[] = { + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +struct clksrc_sources clkset_hclk_low = { + .sources = clkset_hclk_low_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_low_list), +}; + +int s5p64x0_pclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable); +} + +int s5p64x0_hclk0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable); +} + +int s5p64x0_hclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable); +} + +int s5p64x0_sclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable); +} + +int s5p64x0_sclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable); +} + +int s5p64x0_mem_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable); +} + +int s5p64x0_clk48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5P64X0_OTHERS); + if (enable) + val |= S5P64X0_OTHERS_USB_SIG_MASK; + else + val &= ~S5P64X0_OTHERS_USB_SIG_MASK; + + __raw_writel(val, S5P64X0_OTHERS); + + local_irq_restore(flags); + + return 0; +} diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h new file mode 100644 index 0000000..58e1bc8 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P64X0_APLL_CON S5P_CLKREG(0x0C) +#define S5P64X0_MPLL_CON S5P_CLKREG(0x10) +#define S5P64X0_EPLL_CON S5P_CLKREG(0x14) +#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18) + +#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C) + +#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20) +#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24) +#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28) + +#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30) +#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34) +#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38) +#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C) + +#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40) + +#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44) +#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48) + +#define S5P6450_DPLL_CON S5P_CLKREG(0x50) +#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) + +#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) + +#define S5P64X0_SYS_ID S5P_CLKREG(0x118) +#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) + +#define S5P64X0_PWR_CFG S5P_CLKREG(0x804) +#define S5P64X0_OTHERS S5P_CLKREG(0x900) + +#define S5P64X0_CLKDIV0_HCLK_SHIFT (8) +#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) + +#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) + +/* Compatibility defines */ + +#define ARM_CLK_DIV S5P64X0_CLK_DIV0 +#define ARM_DIV_RATIO_SHIFT 0 +#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h new file mode 100644 index 0000000..ff85b4b --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p64x0 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clksrc_clk clk_mout_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_mout_epll; + +extern int s5p64x0_epll_enable(struct clk *clk, int enable); +extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); + +extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk); +extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate); +extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate); + +extern struct clk_ops s5p64x0_clkarm_ops; + +extern struct clksrc_clk clk_armclk; +extern struct clksrc_clk clk_dout_mpll; + +extern struct clk *clkset_hclk_low_list[]; +extern struct clksrc_sources clkset_hclk_low; + +extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_mem_ctrl(struct clk *clk, int enable); + +extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index b5e2552..8aaf4e6 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -74,6 +74,13 @@ struct clk clk_fout_epll = { .ctrlbit = (1 << 31), }; +/* DPLL clock output */ +struct clk clk_fout_dpll = { + .name = "fout_dpll", + .id = -1, + .ctrlbit = (1 << 31), +}; + /* VPLL clock output */ struct clk clk_fout_vpll = { .name = "fout_vpll", @@ -122,6 +129,17 @@ struct clksrc_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; +/* Possible clock sources for DPLL Mux */ +static struct clk *clk_src_dpll_list[] = { + [0] = &clk_fin_dpll, + [1] = &clk_fout_dpll, +}; + +struct clksrc_sources clk_src_dpll = { + .sources = clk_src_dpll_list, + .nr_sources = ARRAY_SIZE(clk_src_dpll_list), +}; + struct clk clk_vpll = { .name = "vpll", .id = -1, @@ -145,6 +163,7 @@ static struct clk *s5p_clks[] __initdata = { &clk_fout_apll, &clk_fout_mpll, &clk_fout_epll, + &clk_fout_dpll, &clk_fout_vpll, &clk_arm, &clk_vpll, diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index 4e8fe08..bf28fad 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -47,6 +47,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, } #define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL4650C_KDIV_MASK (0xFFF) #define PLL46XX_MDIV_MASK (0x1FF) #define PLL46XX_PDIV_MASK (0x3F) #define PLL46XX_SDIV_MASK (0x7) @@ -57,6 +58,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, enum pll46xx_type_t { pll_4600, pll_4650, + pll_4650c, }; static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, @@ -72,6 +74,11 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; kdiv = pll_con1 & PLL46XX_KDIV_MASK; + if (pll_type == pll_4650c) + kdiv = pll_con1 & PLL4650C_KDIV_MASK; + else + kdiv = pll_con1 & PLL46XX_KDIV_MASK; + tmp = baseclk; if (pll_type == pll_4600) { diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h index 09418b1..17036c8 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Header file for s5p clock support * @@ -20,6 +20,7 @@ #define clk_fin_apll clk_ext_xtal_mux #define clk_fin_mpll clk_ext_xtal_mux #define clk_fin_epll clk_ext_xtal_mux +#define clk_fin_dpll clk_ext_xtal_mux #define clk_fin_vpll clk_ext_xtal_mux #define clk_fin_hpll clk_ext_xtal_mux @@ -30,6 +31,7 @@ extern struct clk s5p_clk_27m; extern struct clk clk_fout_apll; extern struct clk clk_fout_mpll; extern struct clk clk_fout_epll; +extern struct clk clk_fout_dpll; extern struct clk clk_fout_vpll; extern struct clk clk_arm; extern struct clk clk_vpll; @@ -37,8 +39,8 @@ extern struct clk clk_vpll; extern struct clksrc_sources clk_src_apll; extern struct clksrc_sources clk_src_mpll; extern struct clksrc_sources clk_src_epll; +extern struct clksrc_sources clk_src_dpll; -extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable); extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); #endif /* __ASM_PLAT_S5P_CLOCK_H */ -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 04/13] ARM: S5P64X0: Update Clock for S5P6440 and S5P6450 @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch updates regarding clock files for supporting S5P6440 and S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common of them and there are specific clock files for each SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/clock.c | 846 -------------------- arch/arm/mach-s5p6440/include/mach/regs-clock.h | 130 --- arch/arm/mach-s5p64x0/clock-s5p6440.c | 626 +++++++++++++++ arch/arm/mach-s5p64x0/clock-s5p6450.c | 655 +++++++++++++++ arch/arm/mach-s5p64x0/clock.c | 253 ++++++ arch/arm/mach-s5p64x0/include/mach/regs-clock.h | 63 ++ arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h | 46 ++ arch/arm/plat-s5p/clock.c | 19 + arch/arm/plat-s5p/include/plat/pll.h | 7 + arch/arm/plat-s5p/include/plat/s5p-clock.h | 8 +- 10 files changed, 1674 insertions(+), 979 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/clock.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/regs-clock.h create mode 100644 arch/arm/mach-s5p64x0/clock-s5p6440.c create mode 100644 arch/arm/mach-s5p64x0/clock-s5p6450.c create mode 100644 arch/arm/mach-s5p64x0/clock.c create mode 100644 arch/arm/mach-s5p64x0/include/mach/regs-clock.h create mode 100644 arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c deleted file mode 100644 index ca6e48d..0000000 --- a/arch/arm/mach-s5p6440/clock.c +++ /dev/null @@ -1,846 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/clock.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p-clock.h> -#include <plat/pll.h> -#include <plat/s5p6440.h> - -/* APLL Mux output clock */ -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static int s5p6440_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -static unsigned long s5p6440_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static u32 epll_div[][5] = { - { 36000000, 0, 48, 1, 4 }, - { 48000000, 0, 32, 1, 3 }, - { 60000000, 0, 40, 1, 3 }, - { 72000000, 0, 48, 1, 3 }, - { 84000000, 0, 28, 1, 2 }, - { 96000000, 0, 32, 1, 2 }, - { 32768000, 45264, 43, 1, 4 }, - { 45158000, 6903, 30, 1, 3 }, - { 49152000, 50332, 32, 1, 3 }, - { 67738000, 10398, 45, 1, 3 }, - { 73728000, 9961, 49, 1, 3 } -}; - -static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P_EPLL_CON); - epll_con_k = __raw_readl(S5P_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P_EPLL_CON); - __raw_writel(epll_con_k, S5P_EPLL_CON_K); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6440_epll_ops = { - .get_rate = s5p6440_epll_get_rate, - .set_rate = s5p6440_epll_set_rate, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, -}; - -enum perf_level { - L0 = 532*1000, - L1 = 266*1000, - L2 = 133*1000, -}; - -static const u32 clock_table[][3] = { - /*{ARM_CLK, DIVarm, DIVhclk}*/ - {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, -}; - -static unsigned long s5p6440_armclk_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; - - return rate / (clkdiv + 1); -} - -static unsigned long s5p6440_armclk_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 iter; - - for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (rate > clock_table[iter][0]) - return clock_table[iter-1][0]; - } - - return clock_table[ARRAY_SIZE(clock_table) - 1][0]; -} - -static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 round_tmp; - u32 iter; - u32 clk_div0_tmp; - u32 cur_rate = clk->ops->get_rate(clk); - unsigned long flags; - - round_tmp = clk->ops->round_rate(clk, rate); - if (round_tmp == cur_rate) - return 0; - - - for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (round_tmp == clock_table[iter][0]) - break; - } - - if (iter >= ARRAY_SIZE(clock_table)) - iter = ARRAY_SIZE(clock_table) - 1; - - local_irq_save(flags); - if (cur_rate > round_tmp) { - /* Frequency Down */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - - } else { - /* Frequency Up */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - } - local_irq_restore(flags); - - clk->rate = clock_table[iter][0]; - - return 0; -} - -static struct clk_ops s5p6440_clkarm_ops = { - .get_rate = s5p6440_armclk_get_rate, - .set_rate = s5p6440_armclk_set_rate, - .round_rate = s5p6440_armclk_round_rate, -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .id = 1, - .parent = &clk_mout_apll.clk, - .ops = &s5p6440_clkarm_ops, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mpll = { - .clk = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_mpll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - .id = -1, - .parent = &clk_armclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .id = -1, - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 }, -}; - -static struct clk *clkset_hclklow_list[] = { - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_hclklow = { - .sources = clkset_hclklow_list, - .nr_sources = ARRAY_SIZE(clkset_hclklow_list), -}; - -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "hclk_low", - .id = -1, - }, - .sources = &clkset_hclklow, - .reg_src = { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "pclk_low", - .id = -1, - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -int s5p6440_clk48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5P_OTHERS); - if (enable) - val |= S5P_OTHERS_USB_SIG_MASK; - else - val &= ~S5P_OTHERS_USB_SIG_MASK; - - __raw_writel(val, S5P_OTHERS); - - local_irq_restore(flags); - - return 0; -} - -static int s5p6440_pclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); -} - -static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); -} - -static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); -} - -static int s5p6440_sclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); -} - -static int s5p6440_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable); -} - -static int s5p6440_mem_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); -} - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_mem_ctrl, - .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, - }, { - .name = "adc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIC0, - }, { - .name = "i2s_v40", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIS2, - }, { - .name = "spi", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI1, - }, { - .name = "sclk_spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, - }, { - .name = "sclk_spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, - }, { - .name = "mmc_48m", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, - }, { - .name = "mmc_48m", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, - }, { - .name = "mmc_48m", - .id = 2, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, - }, { - .name = "otg", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_USB - }, { - .name = "post", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_POST0 - }, { - .name = "lcd", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_WDT, - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_PWM, - }, { - .name = "hclk_fimgvg", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "tsi", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "pclk_fimgvg", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 31), - }, { - .name = "dmc0", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 30), - }, { - .name = "etm", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 29), - }, { - .name = "dsim", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "gps", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "pcm", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "irom", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "2d", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 8), - }, -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "gpio", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_GPIO, - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART3, - }, { - .name = "mem", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "intc", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, -}; - -static struct clk clk_iis_cd_v40 = { - .name = "iis_cdclk_v40", - .id = -1, -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", - .id = -1, -}; - -static struct clk *clkset_group1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_group1 = { - .sources = clkset_group1_list, - .nr_sources = ARRAY_SIZE(clkset_group1_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio = { - .sources = clkset_audio_list, - .nr_sources = ARRAY_SIZE(clkset_audio_list), -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5P_CLKCON_SCLK0_UART, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_post", - .id = -1, - .ctrlbit = (1 << 10), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .id = -1, - .ctrlbit = (1 << 1), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimgvg", - .id = -1, - .ctrlbit = (1 << 2), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio2", - .id = -1, - .ctrlbit = (1 << 11), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_audio, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 }, - }, -}; - -/* Clock initialisation code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -void __init_or_cpufreq s5p6440_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - - /* Set S5P6440 functions for clk_fout_epll */ - clk_fout_epll.enable = s5p6440_epll_enable; - clk_fout_epll.ops = &s5p6440_epll_ops; - - clk_48m.enable = s5p6440_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), - __raw_readl(S5P_EPLL_CON_K)); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -void __init s5p6440_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - - ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - if (ret > 0) - printk(KERN_ERR "Failed to register %u clocks\n", ret); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - (clkp->enable)(clkp, 0); - } - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h deleted file mode 100644 index c783ecc..0000000 --- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x04) -#define S5P_EPLL_LOCK S5P_CLKREG(0x08) -#define S5P_APLL_CON S5P_CLKREG(0x0C) -#define S5P_MPLL_CON S5P_CLKREG(0x10) -#define S5P_EPLL_CON S5P_CLKREG(0x14) -#define S5P_EPLL_CON_K S5P_CLKREG(0x18) -#define S5P_CLK_SRC0 S5P_CLKREG(0x1C) -#define S5P_CLK_DIV0 S5P_CLKREG(0x20) -#define S5P_CLK_DIV1 S5P_CLKREG(0x24) -#define S5P_CLK_DIV2 S5P_CLKREG(0x28) -#define S5P_CLK_OUT S5P_CLKREG(0x2C) -#define S5P_CLK_GATE_HCLK0 S5P_CLKREG(0x30) -#define S5P_CLK_GATE_PCLK S5P_CLKREG(0x34) -#define S5P_CLK_GATE_SCLK0 S5P_CLKREG(0x38) -#define S5P_CLK_GATE_MEM0 S5P_CLKREG(0x3C) -#define S5P_CLK_DIV3 S5P_CLKREG(0x40) -#define S5P_CLK_GATE_HCLK1 S5P_CLKREG(0x44) -#define S5P_CLK_GATE_SCLK1 S5P_CLKREG(0x48) -#define S5P_AHB_CON0 S5P_CLKREG(0x100) -#define S5P_CLK_SRC1 S5P_CLKREG(0x10C) -#define S5P_SWRESET S5P_CLKREG(0x114) -#define S5P_SYS_ID S5P_CLKREG(0x118) -#define S5P_SYS_OTHERS S5P_CLKREG(0x11C) -#define S5P_MEM_CFG_STAT S5P_CLKREG(0x12C) -#define S5P_PWR_CFG S5P_CLKREG(0x804) -#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0x808) -#define S5P_NORMAL_CFG S5P_CLKREG(0x810) -#define S5P_STOP_CFG S5P_CLKREG(0x814) -#define S5P_SLEEP_CFG S5P_CLKREG(0x818) -#define S5P_OSC_FREQ S5P_CLKREG(0x820) -#define S5P_OSC_STABLE S5P_CLKREG(0x824) -#define S5P_PWR_STABLE S5P_CLKREG(0x828) -#define S5P_MTC_STABLE S5P_CLKREG(0x830) -#define S5P_OTHERS S5P_CLKREG(0x900) -#define S5P_RST_STAT S5P_CLKREG(0x904) -#define S5P_WAKEUP_STAT S5P_CLKREG(0x908) -#define S5P_SLPEN S5P_CLKREG(0x930) -#define S5P_INFORM0 S5P_CLKREG(0xA00) -#define S5P_INFORM1 S5P_CLKREG(0xA04) -#define S5P_INFORM2 S5P_CLKREG(0xA08) -#define S5P_INFORM3 S5P_CLKREG(0xA0C) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_PCLK_MASK (0xf << 12) -#define S5P_CLKDIV0_PCLK_SHIFT (12) -#define S5P_CLKDIV0_HCLK_MASK (0xf << 8) -#define S5P_CLKDIV0_HCLK_SHIFT (8) -#define S5P_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S5P_CLKDIV0_ARM_MASK (0xf << 0) -#define S5P_CLKDIV0_ARM_SHIFT (0) - -/* CLKDIV3 */ -#define S5P_CLKDIV3_PCLK_LOW_MASK (0xf << 12) -#define S5P_CLKDIV3_PCLK_LOW_SHIFT (12) -#define S5P_CLKDIV3_HCLK_LOW_MASK (0xf << 8) -#define S5P_CLKDIV3_HCLK_LOW_SHIFT (8) - -/* HCLK0 GATE Registers */ -#define S5P_CLKCON_HCLK0_USB (1<<20) -#define S5P_CLKCON_HCLK0_HSMMC2 (1<<19) -#define S5P_CLKCON_HCLK0_HSMMC1 (1<<18) -#define S5P_CLKCON_HCLK0_HSMMC0 (1<<17) -#define S5P_CLKCON_HCLK0_POST0 (1<<5) - -/* HCLK1 GATE Registers */ -#define S5P_CLKCON_HCLK1_DISPCON (1<<1) - -/* PCLK GATE Registers */ -#define S5P_CLKCON_PCLK_IIS2 (1<<26) -#define S5P_CLKCON_PCLK_SPI1 (1<<22) -#define S5P_CLKCON_PCLK_SPI0 (1<<21) -#define S5P_CLKCON_PCLK_GPIO (1<<18) -#define S5P_CLKCON_PCLK_IIC0 (1<<17) -#define S5P_CLKCON_PCLK_TSADC (1<<12) -#define S5P_CLKCON_PCLK_PWM (1<<7) -#define S5P_CLKCON_PCLK_RTC (1<<6) -#define S5P_CLKCON_PCLK_WDT (1<<5) -#define S5P_CLKCON_PCLK_UART3 (1<<4) -#define S5P_CLKCON_PCLK_UART2 (1<<3) -#define S5P_CLKCON_PCLK_UART1 (1<<2) -#define S5P_CLKCON_PCLK_UART0 (1<<1) - -/* SCLK0 GATE Registers */ -#define S5P_CLKCON_SCLK0_MMC2_48 (1<<29) -#define S5P_CLKCON_SCLK0_MMC1_48 (1<<28) -#define S5P_CLKCON_SCLK0_MMC0_48 (1<<27) -#define S5P_CLKCON_SCLK0_MMC2 (1<<26) -#define S5P_CLKCON_SCLK0_MMC1 (1<<25) -#define S5P_CLKCON_SCLK0_MMC0 (1<<24) -#define S5P_CLKCON_SCLK0_SPI1_48 (1<<23) -#define S5P_CLKCON_SCLK0_SPI0_48 (1<<22) -#define S5P_CLKCON_SCLK0_SPI1 (1<<21) -#define S5P_CLKCON_SCLK0_SPI0 (1<<20) -#define S5P_CLKCON_SCLK0_UART (1<<5) - -/* SCLK1 GATE Registers */ - -/* MEM0 GATE Registers */ -#define S5P_CLKCON_MEM0_HCLK_NFCON (1<<2) - -/*OTHERS Resgister */ -#define S5P_OTHERS_USB_SIG_MASK (1<<16) -#define S5P_OTHERS_HCLK_LOW_SEL_MPLL (1<<6) - -/* Compatibility defines */ -#define ARM_CLK_DIV S5P_CLK_DIV0 -#define ARM_DIV_RATIO_SHIFT 0 -#define ARM_DIV_MASK (0xf << ARM_DIV_RATIO_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c new file mode 100644 index 0000000..cd36bd0 --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -0,0 +1,626 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6440 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> + +static u32 epll_div[][5] = { + { 36000000, 0, 48, 1, 4 }, + { 48000000, 0, 32, 1, 3 }, + { 60000000, 0, 40, 1, 3 }, + { 72000000, 0, 48, 1, 3 }, + { 84000000, 0, 28, 1, 2 }, + { 96000000, 0, 32, 1, 2 }, + { 32768000, 45264, 43, 1, 4 }, + { 45158000, 6903, 30, 1, 3 }, + { 49152000, 50332, 32, 1, 3 }, + { 67738000, 10398, 45, 1, 3 }, + { 73728000, 9961, 49, 1, 3 } +}; + +static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6440_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6440_epll_set_rate, +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + .parent = &clk_armclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_mem_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "post", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 5) + }, { + .name = "2d", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "otg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20) + }, { + .name = "irom", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "hclk_fimgvg", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "tsi", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "rtc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "pcm", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "gps", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "i2s_v40", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "dsim", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "etm", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 29), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + }, { + .name = "pclk_fimgvg", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 31), + }, { + .name = "sclk_spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "sclk_spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 23), + }, { + .name = "mmc_48m", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "mmc_48m", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "mmc_48m", + .id = 2, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 29), + }, +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk clk_iis_cd_v40 = { + .name = "iis_cdclk_v40", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_group1_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, +}; + +static struct clksrc_sources clkset_group1 = { + .sources = clkset_group1_list, + .nr_sources = ARRAY_SIZE(clkset_group1_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_audio_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +static struct clksrc_sources clkset_audio = { + .sources = clkset_audio_list, + .nr_sources = ARRAY_SIZE(clkset_audio_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_post", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimgvg", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_audio2", + .id = -1, + .ctrlbit = (1 << 11), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_audio, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, +}; + +void __init_or_cpufreq s5p6440_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned int ptr; + + /* Set S5P6440 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6440_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + + printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +void __init s5p6440_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c new file mode 100644 index 0000000..95bab7d --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -0,0 +1,655 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6450 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6450.h> + +static struct clksrc_clk clk_mout_dpll = { + .clk = { + .name = "mout_dpll", + .id = -1, + }, + .sources = &clk_src_dpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 }, +}; + +static u32 epll_div[][5] = { + { 133000000, 27307, 55, 2, 2 }, + { 100000000, 43691, 41, 2, 2 }, + { 480000000, 0, 80, 2, 0 }, +}; + +static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6450_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6450_epll_set_rate, +}; + +static struct clksrc_clk clk_dout_epll = { + .clk = { + .name = "dout_epll", + .id = -1, + .parent = &clk_mout_epll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_mout_hclk_sel = { + .clk = { + .name = "mout_hclk_sel", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 }, +}; + +static struct clk *clkset_hclk_list[] = { + &clk_mout_hclk_sel.clk, + &clk_armclk.clk, +}; + +static struct clksrc_sources clkset_hclk = { + .sources = clkset_hclk_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_list), +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + }, + .sources = &clkset_hclk, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_dout_pwm_ratio0 = { + .clk = { + .name = "clk_dout_pwm_ratio0", + .id = -1, + .parent = &clk_mout_hclk_sel.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_to_wdt_pwm = { + .clk = { + .name = "clk_pclk_to_wdt_pwm", + .id = -1, + .parent = &clk_dout_pwm_ratio0.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "usbhost", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "usbotg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "iis", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + } +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_to_wdt_pwm.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk *clkset_uart_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_mali_list[] = { + &clk_mout_epll.clk, + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clkset_mali = { + .sources = clkset_mali_list, + .nr_sources = ARRAY_SIZE(clkset_mali_list), +}; + +static struct clk *clkset_group2_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, +}; + +static struct clksrc_sources clkset_group2 = { + .sources = clkset_group2_list, + .nr_sources = ARRAY_SIZE(clkset_group2_list), +}; + +static struct clk *clkset_dispcon_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &clk_mout_dpll.clk, +}; + +static struct clksrc_sources clkset_dispcon = { + .sources = clkset_dispcon_list, + .nr_sources = ARRAY_SIZE(clkset_dispcon_list), +}; + +static struct clk *clkset_hsmmc44_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &s5p_clk_27m, + &clk_48m, +}; + +static struct clksrc_sources clkset_hsmmc44 = { + .sources = clkset_hsmmc44_list, + .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list), +}; + +static struct clk *clkset_sclk_audio0_list[] = { + [0] = &clk_dout_epll.clk, + [1] = &clk_dout_mpll.clk, + [2] = &clk_ext_xtal_mux, + [3] = NULL, + [4] = NULL, +}; + +static struct clksrc_sources clkset_sclk_audio0 = { + .sources = clkset_sclk_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), +}; + +static struct clksrc_clk clk_sclk_audio0 = { + .clk = { + .name = "audio-bus", + .id = -1, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 8), + .parent = &clk_dout_epll.clk, + }, + .sources = &clkset_sclk_audio0, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_mmc", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "aclk_mali", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_2d", + .id = -1, + .ctrlbit = (1 << 12), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_usi", + .id = -1, + .ctrlbit = (1 << 7), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_camif", + .id = -1, + .ctrlbit = (1 << 6), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_dispcon, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_hsmmc44", + .id = -1, + .ctrlbit = (1 << 30), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_hsmmc44, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_dout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_mout_hclk_sel, + &clk_dout_pwm_ratio0, + &clk_pclk_to_wdt_pwm, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, + &clk_sclk_audio0, +}; + +void __init_or_cpufreq s5p6450_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned long dpll; + unsigned int ptr; + + /* Set S5P6450 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6450_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON), + __raw_readl(S5P6450_DPLL_CON_K), pll_4650c); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_dpll.rate = dpll; + + printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz, D=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll), + print_mhz(dpll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +void __init s5p6450_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c new file mode 100644 index 0000000..523ba80 --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock.c @@ -0,0 +1,253 @@ +/* linux/arch/arm/mach-s5p64x0/clock.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> + +struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 }, +}; + +struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 }, +}; + +enum perf_level { + L0 = 532*1000, + L1 = 266*1000, + L2 = 133*1000, +}; + +static const u32 clock_table[][3] = { + /*{ARM_CLK, DIVarm, DIVhclk}*/ + {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, +}; + +int s5p64x0_epll_enable(struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit; + + if (enable) + __raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON); + else + __raw_writel(epll_con, S5P64X0_EPLL_CON); + + return 0; +} + +unsigned long s5p64x0_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +unsigned long s5p64x0_armclk_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; + + return rate / (clkdiv + 1); +} + +unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) +{ + u32 iter; + + for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (rate > clock_table[iter][0]) + return clock_table[iter-1][0]; + } + + return clock_table[ARRAY_SIZE(clock_table) - 1][0]; +} + +int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 round_tmp; + u32 iter; + u32 clk_div0_tmp; + u32 cur_rate = clk->ops->get_rate(clk); + unsigned long flags; + + round_tmp = clk->ops->round_rate(clk, rate); + if (round_tmp == cur_rate) + return 0; + + + for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (round_tmp == clock_table[iter][0]) + break; + } + + if (iter >= ARRAY_SIZE(clock_table)) + iter = ARRAY_SIZE(clock_table) - 1; + + local_irq_save(flags); + if (cur_rate > round_tmp) { + /* Frequency Down */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + + } else { + /* Frequency Up */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + } + local_irq_restore(flags); + + clk->rate = clock_table[iter][0]; + + return 0; +} + +struct clk_ops s5p64x0_clkarm_ops = { + .get_rate = s5p64x0_armclk_get_rate, + .set_rate = s5p64x0_armclk_set_rate, + .round_rate = s5p64x0_armclk_round_rate, +}; + +struct clksrc_clk clk_armclk = { + .clk = { + .name = "armclk", + .id = 1, + .parent = &clk_mout_apll.clk, + .ops = &s5p64x0_clkarm_ops, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 }, +}; + +struct clksrc_clk clk_dout_mpll = { + .clk = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, +}; + +struct clk *clkset_hclk_low_list[] = { + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +struct clksrc_sources clkset_hclk_low = { + .sources = clkset_hclk_low_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_low_list), +}; + +int s5p64x0_pclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable); +} + +int s5p64x0_hclk0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable); +} + +int s5p64x0_hclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable); +} + +int s5p64x0_sclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable); +} + +int s5p64x0_sclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable); +} + +int s5p64x0_mem_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable); +} + +int s5p64x0_clk48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5P64X0_OTHERS); + if (enable) + val |= S5P64X0_OTHERS_USB_SIG_MASK; + else + val &= ~S5P64X0_OTHERS_USB_SIG_MASK; + + __raw_writel(val, S5P64X0_OTHERS); + + local_irq_restore(flags); + + return 0; +} diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h new file mode 100644 index 0000000..58e1bc8 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P64X0_APLL_CON S5P_CLKREG(0x0C) +#define S5P64X0_MPLL_CON S5P_CLKREG(0x10) +#define S5P64X0_EPLL_CON S5P_CLKREG(0x14) +#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18) + +#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C) + +#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20) +#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24) +#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28) + +#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30) +#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34) +#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38) +#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C) + +#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40) + +#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44) +#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48) + +#define S5P6450_DPLL_CON S5P_CLKREG(0x50) +#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) + +#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) + +#define S5P64X0_SYS_ID S5P_CLKREG(0x118) +#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) + +#define S5P64X0_PWR_CFG S5P_CLKREG(0x804) +#define S5P64X0_OTHERS S5P_CLKREG(0x900) + +#define S5P64X0_CLKDIV0_HCLK_SHIFT (8) +#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) + +#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) + +/* Compatibility defines */ + +#define ARM_CLK_DIV S5P64X0_CLK_DIV0 +#define ARM_DIV_RATIO_SHIFT 0 +#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h new file mode 100644 index 0000000..ff85b4b --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p64x0 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clksrc_clk clk_mout_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_mout_epll; + +extern int s5p64x0_epll_enable(struct clk *clk, int enable); +extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); + +extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk); +extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate); +extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate); + +extern struct clk_ops s5p64x0_clkarm_ops; + +extern struct clksrc_clk clk_armclk; +extern struct clksrc_clk clk_dout_mpll; + +extern struct clk *clkset_hclk_low_list[]; +extern struct clksrc_sources clkset_hclk_low; + +extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_mem_ctrl(struct clk *clk, int enable); + +extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index b5e2552..8aaf4e6 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -74,6 +74,13 @@ struct clk clk_fout_epll = { .ctrlbit = (1 << 31), }; +/* DPLL clock output */ +struct clk clk_fout_dpll = { + .name = "fout_dpll", + .id = -1, + .ctrlbit = (1 << 31), +}; + /* VPLL clock output */ struct clk clk_fout_vpll = { .name = "fout_vpll", @@ -122,6 +129,17 @@ struct clksrc_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; +/* Possible clock sources for DPLL Mux */ +static struct clk *clk_src_dpll_list[] = { + [0] = &clk_fin_dpll, + [1] = &clk_fout_dpll, +}; + +struct clksrc_sources clk_src_dpll = { + .sources = clk_src_dpll_list, + .nr_sources = ARRAY_SIZE(clk_src_dpll_list), +}; + struct clk clk_vpll = { .name = "vpll", .id = -1, @@ -145,6 +163,7 @@ static struct clk *s5p_clks[] __initdata = { &clk_fout_apll, &clk_fout_mpll, &clk_fout_epll, + &clk_fout_dpll, &clk_fout_vpll, &clk_arm, &clk_vpll, diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index 4e8fe08..bf28fad 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -47,6 +47,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, } #define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL4650C_KDIV_MASK (0xFFF) #define PLL46XX_MDIV_MASK (0x1FF) #define PLL46XX_PDIV_MASK (0x3F) #define PLL46XX_SDIV_MASK (0x7) @@ -57,6 +58,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, enum pll46xx_type_t { pll_4600, pll_4650, + pll_4650c, }; static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, @@ -72,6 +74,11 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; kdiv = pll_con1 & PLL46XX_KDIV_MASK; + if (pll_type == pll_4650c) + kdiv = pll_con1 & PLL4650C_KDIV_MASK; + else + kdiv = pll_con1 & PLL46XX_KDIV_MASK; + tmp = baseclk; if (pll_type == pll_4600) { diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h index 09418b1..17036c8 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Header file for s5p clock support * @@ -20,6 +20,7 @@ #define clk_fin_apll clk_ext_xtal_mux #define clk_fin_mpll clk_ext_xtal_mux #define clk_fin_epll clk_ext_xtal_mux +#define clk_fin_dpll clk_ext_xtal_mux #define clk_fin_vpll clk_ext_xtal_mux #define clk_fin_hpll clk_ext_xtal_mux @@ -30,6 +31,7 @@ extern struct clk s5p_clk_27m; extern struct clk clk_fout_apll; extern struct clk clk_fout_mpll; extern struct clk clk_fout_epll; +extern struct clk clk_fout_dpll; extern struct clk clk_fout_vpll; extern struct clk clk_arm; extern struct clk clk_vpll; @@ -37,8 +39,8 @@ extern struct clk clk_vpll; extern struct clksrc_sources clk_src_apll; extern struct clksrc_sources clk_src_mpll; extern struct clksrc_sources clk_src_epll; +extern struct clksrc_sources clk_src_dpll; -extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable); extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); #endif /* __ASM_PLAT_S5P_CLOCK_H */ -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 05/13] ARM: S5P64X0: Update IRQ support 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch updates IRQ support for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../include/mach/irqs.h | 48 +++++++++++++++----- .../include/mach/regs-irq.h | 8 ++-- 2 files changed, 40 insertions(+), 16 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/irqs.h (71%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/regs-irq.h (66%) diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h similarity index 71% rename from arch/arm/mach-s5p6440/include/mach/irqs.h rename to arch/arm/mach-s5p64x0/include/mach/irqs.h index 16a7612..513abff 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -1,17 +1,17 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h +/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ definitions + * S5P64X0 - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_S5P_IRQS_H -#define __ASM_ARCH_S5P_IRQS_H __FILE__ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ #include <plat/irqs.h> @@ -20,10 +20,12 @@ #define IRQ_EINT0_3 S5P_IRQ_VIC0(0) #define IRQ_EINT4_11 S5P_IRQ_VIC0(1) #define IRQ_RTC_TIC S5P_IRQ_VIC0(2) +#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */ +#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */ #define IRQ_IIC1 S5P_IRQ_VIC0(5) #define IRQ_I2SV40 S5P_IRQ_VIC0(6) -#define IRQ_GPS S5P_IRQ_VIC0(7) -#define IRQ_POST0 S5P_IRQ_VIC0(9) +#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */ + #define IRQ_2D S5P_IRQ_VIC0(11) #define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) #define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) @@ -39,22 +41,26 @@ #define IRQ_EINT12_15 S5P_IRQ_VIC1(0) #define IRQ_PCM0 S5P_IRQ_VIC1(2) +#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */ +#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */ #define IRQ_UART0 S5P_IRQ_VIC1(5) #define IRQ_UART1 S5P_IRQ_VIC1(6) #define IRQ_UART2 S5P_IRQ_VIC1(7) #define IRQ_UART3 S5P_IRQ_VIC1(8) #define IRQ_DMA0 S5P_IRQ_VIC1(9) +#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */ +#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */ #define IRQ_NFC S5P_IRQ_VIC1(13) +#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */ #define IRQ_SPI0 S5P_IRQ_VIC1(16) #define IRQ_SPI1 S5P_IRQ_VIC1(17) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */ #define IRQ_IIC S5P_IRQ_VIC1(18) #define IRQ_DISPCON3 S5P_IRQ_VIC1(19) -#define IRQ_FIMGVG S5P_IRQ_VIC1(20) #define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMU S5P_IRQ_VIC1(23) +#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */ #define IRQ_HSMMC0 S5P_IRQ_VIC1(24) #define IRQ_HSMMC1 S5P_IRQ_VIC1(25) -#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ #define IRQ_OTG S5P_IRQ_VIC1(26) #define IRQ_DSI S5P_IRQ_VIC1(27) #define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) @@ -63,6 +69,24 @@ #define IRQ_TC IRQ_PENDN #define IRQ_ADC S5P_IRQ_VIC1(31) +/* UART interrupts, S5P6450 has 5 UARTs */ +#define IRQ_S5P_UART_BASE4 (96) +#define IRQ_S5P_UART_BASE5 (100) + +#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR) + +/* S3C compatibilty defines */ +#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 +#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 + +/* S5P6450 EINT feature will be added */ + /* * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place @@ -115,4 +139,4 @@ #define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) -#endif /* __ASM_ARCH_S5P_IRQS_H */ +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h similarity index 66% rename from arch/arm/mach-s5p6440/include/mach/regs-irq.h rename to arch/arm/mach-s5p64x0/include/mach/regs-irq.h index a961f4b..4aaebda 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-irq.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ register definitions + * S5P64X0 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 05/13] ARM: S5P64X0: Update IRQ support @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch updates IRQ support for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../include/mach/irqs.h | 48 +++++++++++++++----- .../include/mach/regs-irq.h | 8 ++-- 2 files changed, 40 insertions(+), 16 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/irqs.h (71%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/regs-irq.h (66%) diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h similarity index 71% rename from arch/arm/mach-s5p6440/include/mach/irqs.h rename to arch/arm/mach-s5p64x0/include/mach/irqs.h index 16a7612..513abff 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -1,17 +1,17 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h +/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ definitions + * S5P64X0 - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_S5P_IRQS_H -#define __ASM_ARCH_S5P_IRQS_H __FILE__ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ #include <plat/irqs.h> @@ -20,10 +20,12 @@ #define IRQ_EINT0_3 S5P_IRQ_VIC0(0) #define IRQ_EINT4_11 S5P_IRQ_VIC0(1) #define IRQ_RTC_TIC S5P_IRQ_VIC0(2) +#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */ +#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */ #define IRQ_IIC1 S5P_IRQ_VIC0(5) #define IRQ_I2SV40 S5P_IRQ_VIC0(6) -#define IRQ_GPS S5P_IRQ_VIC0(7) -#define IRQ_POST0 S5P_IRQ_VIC0(9) +#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */ + #define IRQ_2D S5P_IRQ_VIC0(11) #define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) #define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) @@ -39,22 +41,26 @@ #define IRQ_EINT12_15 S5P_IRQ_VIC1(0) #define IRQ_PCM0 S5P_IRQ_VIC1(2) +#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */ +#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */ #define IRQ_UART0 S5P_IRQ_VIC1(5) #define IRQ_UART1 S5P_IRQ_VIC1(6) #define IRQ_UART2 S5P_IRQ_VIC1(7) #define IRQ_UART3 S5P_IRQ_VIC1(8) #define IRQ_DMA0 S5P_IRQ_VIC1(9) +#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */ +#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */ #define IRQ_NFC S5P_IRQ_VIC1(13) +#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */ #define IRQ_SPI0 S5P_IRQ_VIC1(16) #define IRQ_SPI1 S5P_IRQ_VIC1(17) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */ #define IRQ_IIC S5P_IRQ_VIC1(18) #define IRQ_DISPCON3 S5P_IRQ_VIC1(19) -#define IRQ_FIMGVG S5P_IRQ_VIC1(20) #define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMU S5P_IRQ_VIC1(23) +#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */ #define IRQ_HSMMC0 S5P_IRQ_VIC1(24) #define IRQ_HSMMC1 S5P_IRQ_VIC1(25) -#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ #define IRQ_OTG S5P_IRQ_VIC1(26) #define IRQ_DSI S5P_IRQ_VIC1(27) #define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) @@ -63,6 +69,24 @@ #define IRQ_TC IRQ_PENDN #define IRQ_ADC S5P_IRQ_VIC1(31) +/* UART interrupts, S5P6450 has 5 UARTs */ +#define IRQ_S5P_UART_BASE4 (96) +#define IRQ_S5P_UART_BASE5 (100) + +#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR) + +/* S3C compatibilty defines */ +#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 +#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 + +/* S5P6450 EINT feature will be added */ + /* * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place @@ -115,4 +139,4 @@ #define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) -#endif /* __ASM_ARCH_S5P_IRQS_H */ +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h similarity index 66% rename from arch/arm/mach-s5p6440/include/mach/regs-irq.h rename to arch/arm/mach-s5p64x0/include/mach/regs-irq.h index a961f4b..4aaebda 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-irq.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ register definitions + * S5P64X0 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 06/13] ARM: S5P64X0: Update Timer support 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch updates timer support for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../include/mach/pwm-clock.h | 10 ++++------ .../include/mach/tick.h | 13 +++++++++---- 2 files changed, 13 insertions(+), 10 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/pwm-clock.h (86%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/tick.h (60%) diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h similarity index 86% rename from arch/arm/mach-s5p6440/include/mach/pwm-clock.h rename to arch/arm/mach-s5p64x0/include/mach/pwm-clock.h index 6a2a02f..19fff8b 100644 --- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h @@ -1,16 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6440 - pwm clock and timer support + * S5P64X0 - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h similarity index 60% rename from arch/arm/mach-s5p6440/include/mach/tick.h rename to arch/arm/mach-s5p64x0/include/mach/tick.h index 2f25c7f..00aa7f1 100644 --- a/arch/arm/mach-s5p6440/include/mach/tick.h +++ b/arch/arm/mach-s5p64x0/include/mach/tick.h @@ -1,9 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/tick.h +/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Timer tick support definitions + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S5P64X0 - Timer tick support definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 06/13] ARM: S5P64X0: Update Timer support @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch updates timer support for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../include/mach/pwm-clock.h | 10 ++++------ .../include/mach/tick.h | 13 +++++++++---- 2 files changed, 13 insertions(+), 10 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/pwm-clock.h (86%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/tick.h (60%) diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h similarity index 86% rename from arch/arm/mach-s5p6440/include/mach/pwm-clock.h rename to arch/arm/mach-s5p64x0/include/mach/pwm-clock.h index 6a2a02f..19fff8b 100644 --- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h @@ -1,16 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6440 - pwm clock and timer support + * S5P64X0 - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h similarity index 60% rename from arch/arm/mach-s5p6440/include/mach/tick.h rename to arch/arm/mach-s5p64x0/include/mach/tick.h index 2f25c7f..00aa7f1 100644 --- a/arch/arm/mach-s5p6440/include/mach/tick.h +++ b/arch/arm/mach-s5p64x0/include/mach/tick.h @@ -1,9 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/tick.h +/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Timer tick support definitions + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S5P64X0 - Timer tick support definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 07/13] ARM: S5P64X0: Update Audio support 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim, Jassi Brar This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com> --- arch/arm/mach-s5p6440/dev-audio.c | 127 ----------- arch/arm/mach-s5p6440/dev-spi.c | 176 --------------- arch/arm/mach-s5p6440/include/mach/spi-clocks.h | 17 -- arch/arm/mach-s5p64x0/dev-audio.c | 164 ++++++++++++++ arch/arm/mach-s5p64x0/dev-spi.c | 275 +++++++++++++++++++++++ arch/arm/mach-s5p64x0/include/mach/spi-clocks.h | 20 ++ arch/arm/plat-samsung/include/plat/devs.h | 5 + 7 files changed, 464 insertions(+), 320 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/dev-audio.c delete mode 100644 arch/arm/mach-s5p6440/dev-spi.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/spi-clocks.h create mode 100644 arch/arm/mach-s5p64x0/dev-audio.c create mode 100644 arch/arm/mach-s5p64x0/dev-spi.c create mode 100644 arch/arm/mach-s5p64x0/include/mach/spi-clocks.h diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c deleted file mode 100644 index 3ca0d2b..0000000 --- a/arch/arm/mach-s5p6440/dev-audio.c +++ /dev/null @@ -1,127 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/audio.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6440_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case -1: - s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_i2s_pdata = { - .cfg_gpio = s5p6440_cfg_i2s, -}; - -static struct resource s5p6440_iis0_resource[] = { - [0] = { - .start = S5P6440_PA_I2S, - .end = S5P6440_PA_I2S + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_iis = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6440_iis0_resource), - .resource = s5p6440_iis0_resource, - .dev = { - .platform_data = &s3c_i2s_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6440_pcm_cfg_gpio, -}; - -static struct resource s5p6440_pcm0_resource[] = { - [0] = { - .start = S5P6440_PA_PCM, - .end = S5P6440_PA_PCM + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_pcm = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), - .resource = s5p6440_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c deleted file mode 100644 index 510af44..0000000 --- a/arch/arm/mach-s5p6440/dev-spi.c +++ /dev/null @@ -1,176 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5P6440_SPI_SRCCLK_PCLK] = "pclk", - [S5P6440_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); - break; - - case 1: - s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6440_spi0_resource[] = { - [0] = { - .start = S5P6440_PA_SPI0, - .end = S5P6440_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi0_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6440_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_spi0_resource), - .resource = s5p6440_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi0_pdata, - }, -}; - -static struct resource s5p6440_spi1_resource[] = { - [0] = { - .start = S5P6440_PA_SPI1, - .end = S5P6440_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi1_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, -}; - -struct platform_device s5p6440_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_spi1_resource), - .resource = s5p6440_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi1_pdata, - }, -}; - -void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6440_spi0_pdata; - break; - case 1: - pd = &s5p6440_spi1_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h deleted file mode 100644 index 5fbca50..0000000 --- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6440_PLAT_SPI_CLKS_H -#define __S5P6440_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6440_SPI_SRCCLK_PCLK 0 -#define S5P6440_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6440_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c new file mode 100644 index 0000000..ac7cfce --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s5p64x0/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5p6440_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_i2s_pdata = { + .cfg_gpio = s5p6440_cfg_i2s, +}; + +static struct s3c_audio_pdata s5p6450_i2s_pdata = { + .cfg_gpio = s5p6450_cfg_i2s, +}; + +static struct resource s5p64x0_iis0_resource[] = { + [0] = { + .start = S5P64X0_PA_I2S, + .end = S5P64X0_PA_I2S + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_iis = { + .name = "s3c64x0-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6440_i2s_pdata, + }, +}; + +struct platform_device s5p6450_device_iis0 = { + .name = "s3c64x0-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6450_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_pcm_pdata = { + .cfg_gpio = s5p6440_pcm_cfg_gpio, +}; + +static struct resource s5p6440_pcm0_resource[] = { + [0] = { + .start = S5P64X0_PA_PCM, + .end = S5P64X0_PA_PCM + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_pcm = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), + .resource = s5p6440_pcm0_resource, + .dev = { + .platform_data = &s5p6440_pcm_pdata, + }, +}; diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c new file mode 100644 index 0000000..7303d3a --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -0,0 +1,275 @@ +/* linux/arch/arm/mach-s5p64x0/dev-spi.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64x0-spi.h> +#include <plat/gpio-cfg.h> + +static char *s5p6440_spi_src_clks[] = { + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", + [S5P64X0_SPI_SRCCLK_SCLK] = "spi_epll", +}; + +static char *s5p6450_spi_src_clks[] = { + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", + [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5p64x0_spi0_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI0, + .end = S5P64X0_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64x0_spi_info s5p6440_spi0_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static struct s3c64x0_spi_info s5p6450_spi0_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p6440_device_spi0 = { + .name = "s3c64x0-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), + .resource = s5p64x0_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6440_spi0_pdata, + }, +}; + +struct platform_device s5p6450_device_spi0 = { + .name = "s3c64x0-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), + .resource = s5p64x0_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6450_spi0_pdata, + }, +}; + +static struct resource s5p64x0_spi1_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI1, + .end = S5P64X0_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64x0_spi_info s5p6440_spi1_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +static struct s3c64x0_spi_info s5p6450_spi1_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +struct platform_device s5p6440_device_spi1 = { + .name = "s3c64x0-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), + .resource = s5p64x0_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6440_spi1_pdata, + }, +}; + +struct platform_device s5p6450_device_spi1 = { + .name = "s3c64x0-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), + .resource = s5p64x0_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6450_spi1_pdata, + }, +}; + +void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64x0_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5p6440_spi0_pdata; + break; + case 1: + pd = &s5p6440_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = s5p6440_spi_src_clks[src_clk_nr]; +} + +void __init s5p6450_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64x0_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P6450_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5p6450_spi0_pdata; + break; + case 1: + pd = &s5p6450_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = s5p6450_spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h new file mode 100644 index 0000000..170a20a --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SPI_CLKS_H +#define __ASM_ARCH_SPI_CLKS_H __FILE__ + +#define S5P64X0_SPI_SRCCLK_PCLK 0 +#define S5P64X0_SPI_SRCCLK_SCLK 1 + +#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 85f6f23..10d0d3c 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -67,6 +67,8 @@ extern struct platform_device s5pv210_device_spi0; extern struct platform_device s5pv210_device_spi1; extern struct platform_device s5p6440_device_spi0; extern struct platform_device s5p6440_device_spi1; +extern struct platform_device s5p6450_device_spi0; +extern struct platform_device s5p6450_device_spi1; extern struct platform_device s3c_device_hwmon; @@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; +extern struct platform_device s5p6450_device_iis0; +extern struct platform_device s5p6450_device_pcm0; + extern struct platform_device s5pc100_device_ac97; extern struct platform_device s5pc100_device_pcm0; extern struct platform_device s5pc100_device_pcm1; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 07/13] ARM: S5P64X0: Update Audio support @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com> --- arch/arm/mach-s5p6440/dev-audio.c | 127 ----------- arch/arm/mach-s5p6440/dev-spi.c | 176 --------------- arch/arm/mach-s5p6440/include/mach/spi-clocks.h | 17 -- arch/arm/mach-s5p64x0/dev-audio.c | 164 ++++++++++++++ arch/arm/mach-s5p64x0/dev-spi.c | 275 +++++++++++++++++++++++ arch/arm/mach-s5p64x0/include/mach/spi-clocks.h | 20 ++ arch/arm/plat-samsung/include/plat/devs.h | 5 + 7 files changed, 464 insertions(+), 320 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/dev-audio.c delete mode 100644 arch/arm/mach-s5p6440/dev-spi.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/spi-clocks.h create mode 100644 arch/arm/mach-s5p64x0/dev-audio.c create mode 100644 arch/arm/mach-s5p64x0/dev-spi.c create mode 100644 arch/arm/mach-s5p64x0/include/mach/spi-clocks.h diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c deleted file mode 100644 index 3ca0d2b..0000000 --- a/arch/arm/mach-s5p6440/dev-audio.c +++ /dev/null @@ -1,127 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/audio.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6440_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case -1: - s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_i2s_pdata = { - .cfg_gpio = s5p6440_cfg_i2s, -}; - -static struct resource s5p6440_iis0_resource[] = { - [0] = { - .start = S5P6440_PA_I2S, - .end = S5P6440_PA_I2S + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_iis = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6440_iis0_resource), - .resource = s5p6440_iis0_resource, - .dev = { - .platform_data = &s3c_i2s_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6440_pcm_cfg_gpio, -}; - -static struct resource s5p6440_pcm0_resource[] = { - [0] = { - .start = S5P6440_PA_PCM, - .end = S5P6440_PA_PCM + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_pcm = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), - .resource = s5p6440_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c deleted file mode 100644 index 510af44..0000000 --- a/arch/arm/mach-s5p6440/dev-spi.c +++ /dev/null @@ -1,176 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5P6440_SPI_SRCCLK_PCLK] = "pclk", - [S5P6440_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); - break; - - case 1: - s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6440_spi0_resource[] = { - [0] = { - .start = S5P6440_PA_SPI0, - .end = S5P6440_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi0_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6440_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_spi0_resource), - .resource = s5p6440_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi0_pdata, - }, -}; - -static struct resource s5p6440_spi1_resource[] = { - [0] = { - .start = S5P6440_PA_SPI1, - .end = S5P6440_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi1_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, -}; - -struct platform_device s5p6440_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_spi1_resource), - .resource = s5p6440_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi1_pdata, - }, -}; - -void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6440_spi0_pdata; - break; - case 1: - pd = &s5p6440_spi1_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h deleted file mode 100644 index 5fbca50..0000000 --- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6440_PLAT_SPI_CLKS_H -#define __S5P6440_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6440_SPI_SRCCLK_PCLK 0 -#define S5P6440_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6440_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c new file mode 100644 index 0000000..ac7cfce --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s5p64x0/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5p6440_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_i2s_pdata = { + .cfg_gpio = s5p6440_cfg_i2s, +}; + +static struct s3c_audio_pdata s5p6450_i2s_pdata = { + .cfg_gpio = s5p6450_cfg_i2s, +}; + +static struct resource s5p64x0_iis0_resource[] = { + [0] = { + .start = S5P64X0_PA_I2S, + .end = S5P64X0_PA_I2S + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_iis = { + .name = "s3c64x0-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6440_i2s_pdata, + }, +}; + +struct platform_device s5p6450_device_iis0 = { + .name = "s3c64x0-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6450_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_pcm_pdata = { + .cfg_gpio = s5p6440_pcm_cfg_gpio, +}; + +static struct resource s5p6440_pcm0_resource[] = { + [0] = { + .start = S5P64X0_PA_PCM, + .end = S5P64X0_PA_PCM + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_pcm = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), + .resource = s5p6440_pcm0_resource, + .dev = { + .platform_data = &s5p6440_pcm_pdata, + }, +}; diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c new file mode 100644 index 0000000..7303d3a --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -0,0 +1,275 @@ +/* linux/arch/arm/mach-s5p64x0/dev-spi.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64x0-spi.h> +#include <plat/gpio-cfg.h> + +static char *s5p6440_spi_src_clks[] = { + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", + [S5P64X0_SPI_SRCCLK_SCLK] = "spi_epll", +}; + +static char *s5p6450_spi_src_clks[] = { + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", + [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5p64x0_spi0_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI0, + .end = S5P64X0_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64x0_spi_info s5p6440_spi0_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static struct s3c64x0_spi_info s5p6450_spi0_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p6440_device_spi0 = { + .name = "s3c64x0-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), + .resource = s5p64x0_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6440_spi0_pdata, + }, +}; + +struct platform_device s5p6450_device_spi0 = { + .name = "s3c64x0-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), + .resource = s5p64x0_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6450_spi0_pdata, + }, +}; + +static struct resource s5p64x0_spi1_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI1, + .end = S5P64X0_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64x0_spi_info s5p6440_spi1_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +static struct s3c64x0_spi_info s5p6450_spi1_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +struct platform_device s5p6440_device_spi1 = { + .name = "s3c64x0-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), + .resource = s5p64x0_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6440_spi1_pdata, + }, +}; + +struct platform_device s5p6450_device_spi1 = { + .name = "s3c64x0-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), + .resource = s5p64x0_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6450_spi1_pdata, + }, +}; + +void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64x0_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5p6440_spi0_pdata; + break; + case 1: + pd = &s5p6440_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = s5p6440_spi_src_clks[src_clk_nr]; +} + +void __init s5p6450_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64x0_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P6450_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5p6450_spi0_pdata; + break; + case 1: + pd = &s5p6450_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = s5p6450_spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h new file mode 100644 index 0000000..170a20a --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SPI_CLKS_H +#define __ASM_ARCH_SPI_CLKS_H __FILE__ + +#define S5P64X0_SPI_SRCCLK_PCLK 0 +#define S5P64X0_SPI_SRCCLK_SCLK 1 + +#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 85f6f23..10d0d3c 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -67,6 +67,8 @@ extern struct platform_device s5pv210_device_spi0; extern struct platform_device s5pv210_device_spi1; extern struct platform_device s5p6440_device_spi0; extern struct platform_device s5p6440_device_spi1; +extern struct platform_device s5p6450_device_spi0; +extern struct platform_device s5p6450_device_spi1; extern struct platform_device s3c_device_hwmon; @@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; +extern struct platform_device s5p6450_device_iis0; +extern struct platform_device s5p6450_device_pcm0; + extern struct platform_device s5pc100_device_ac97; extern struct platform_device s5pc100_device_pcm0; extern struct platform_device s5pc100_device_pcm1; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 07/13] ARM: S5P64X0: Update Audio support 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-02 1:44 ` Jassi Brar -1 siblings, 0 replies; 52+ messages in thread From: Jassi Brar @ 2010-09-02 1:44 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, Jassi Brar, ben-linux On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > Cc: Jassi Brar <jassi.brar@samsung.com> > --- > arch/arm/mach-s5p6440/dev-audio.c | 127 ----------- > arch/arm/mach-s5p6440/dev-spi.c | 176 --------------- > arch/arm/mach-s5p6440/include/mach/spi-clocks.h | 17 -- > arch/arm/mach-s5p64x0/dev-audio.c | 164 ++++++++++++++ > arch/arm/mach-s5p64x0/dev-spi.c | 275 +++++++++++++++++++++++ > arch/arm/mach-s5p64x0/include/mach/spi-clocks.h | 20 ++ > arch/arm/plat-samsung/include/plat/devs.h | 5 + > 7 files changed, 464 insertions(+), 320 deletions(-) > delete mode 100644 arch/arm/mach-s5p6440/dev-audio.c > delete mode 100644 arch/arm/mach-s5p6440/dev-spi.c > delete mode 100644 arch/arm/mach-s5p6440/include/mach/spi-clocks.h > create mode 100644 arch/arm/mach-s5p64x0/dev-audio.c > create mode 100644 arch/arm/mach-s5p64x0/dev-spi.c > create mode 100644 arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > > diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c > deleted file mode 100644 > index 3ca0d2b..0000000 > --- a/arch/arm/mach-s5p6440/dev-audio.c > +++ /dev/null > @@ -1,127 +0,0 @@ > -/* linux/arch/arm/mach-s5p6440/dev-audio.c > - * > - * Copyright (c) 2010 Samsung Electronics Co. Ltd > - * Jaswinder Singh <jassi.brar@samsung.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -#include <linux/platform_device.h> > -#include <linux/dma-mapping.h> > -#include <linux/gpio.h> > - > -#include <plat/gpio-cfg.h> > -#include <plat/audio.h> > - > -#include <mach/map.h> > -#include <mach/dma.h> > -#include <mach/irqs.h> > - > -static int s5p6440_cfg_i2s(struct platform_device *pdev) > -{ > - /* configure GPIO for i2s port */ > - switch (pdev->id) { > - case -1: > - s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); > - s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); > - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); > - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); > - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); > - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); > - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); > - break; > - > - default: > - printk(KERN_ERR "Invalid Device %d\n", pdev->id); > - return -EINVAL; > - } > - > - return 0; > -} > - > -static struct s3c_audio_pdata s3c_i2s_pdata = { > - .cfg_gpio = s5p6440_cfg_i2s, > -}; > - > -static struct resource s5p6440_iis0_resource[] = { > - [0] = { > - .start = S5P6440_PA_I2S, > - .end = S5P6440_PA_I2S + 0x100 - 1, > - .flags = IORESOURCE_MEM, > - }, > - [1] = { > - .start = DMACH_I2S0_TX, > - .end = DMACH_I2S0_TX, > - .flags = IORESOURCE_DMA, > - }, > - [2] = { > - .start = DMACH_I2S0_RX, > - .end = DMACH_I2S0_RX, > - .flags = IORESOURCE_DMA, > - }, > -}; > - > -struct platform_device s5p6440_device_iis = { > - .name = "s3c64xx-iis-v4", > - .id = -1, > - .num_resources = ARRAY_SIZE(s5p6440_iis0_resource), > - .resource = s5p6440_iis0_resource, > - .dev = { > - .platform_data = &s3c_i2s_pdata, > - }, > -}; > - > -/* PCM Controller platform_devices */ > - > -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) > -{ > - switch (pdev->id) { > - case 0: > - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); > - break; > - > - default: > - printk(KERN_DEBUG "Invalid PCM Controller number!"); > - return -EINVAL; > - } > - > - return 0; > -} > - > -static struct s3c_audio_pdata s3c_pcm_pdata = { > - .cfg_gpio = s5p6440_pcm_cfg_gpio, > -}; > - > -static struct resource s5p6440_pcm0_resource[] = { > - [0] = { > - .start = S5P6440_PA_PCM, > - .end = S5P6440_PA_PCM + 0x100 - 1, > - .flags = IORESOURCE_MEM, > - }, > - [1] = { > - .start = DMACH_PCM0_TX, > - .end = DMACH_PCM0_TX, > - .flags = IORESOURCE_DMA, > - }, > - [2] = { > - .start = DMACH_PCM0_RX, > - .end = DMACH_PCM0_RX, > - .flags = IORESOURCE_DMA, > - }, > -}; > - > -struct platform_device s5p6440_device_pcm = { > - .name = "samsung-pcm", > - .id = 0, > - .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), > - .resource = s5p6440_pcm0_resource, > - .dev = { > - .platform_data = &s3c_pcm_pdata, > - }, > -}; > diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c > deleted file mode 100644 > index 510af44..0000000 > --- a/arch/arm/mach-s5p6440/dev-spi.c > +++ /dev/null > @@ -1,176 +0,0 @@ > -/* linux/arch/arm/mach-s5p6440/dev-spi.c > - * > - * Copyright (C) 2010 Samsung Electronics Co. Ltd. > - * Jaswinder Singh <jassi.brar@samsung.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -#include <linux/platform_device.h> > -#include <linux/dma-mapping.h> > -#include <linux/gpio.h> > - > -#include <mach/dma.h> > -#include <mach/map.h> > -#include <mach/irqs.h> > -#include <mach/spi-clocks.h> > - > -#include <plat/s3c64xx-spi.h> > -#include <plat/gpio-cfg.h> > - > -static char *spi_src_clks[] = { > - [S5P6440_SPI_SRCCLK_PCLK] = "pclk", > - [S5P6440_SPI_SRCCLK_SCLK] = "spi_epll", > -}; > - > -/* SPI Controller platform_devices */ > - > -/* Since we emulate multi-cs capability, we do not touch the CS. > - * The emulated CS is toggled by board specific mechanism, as it can > - * be either some immediate GPIO or some signal out of some other > - * chip in between ... or some yet another way. > - * We simply do not assume anything about CS. > - */ > -static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) > -{ > - switch (pdev->id) { > - case 0: > - s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); > - s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); > - s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); > - s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); > - break; > - > - case 1: > - s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); > - s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); > - s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); > - s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); > - s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); > - break; > - > - default: > - dev_err(&pdev->dev, "Invalid SPI Controller number!"); > - return -EINVAL; > - } > - > - return 0; > -} > - > -static struct resource s5p6440_spi0_resource[] = { > - [0] = { > - .start = S5P6440_PA_SPI0, > - .end = S5P6440_PA_SPI0 + 0x100 - 1, > - .flags = IORESOURCE_MEM, > - }, > - [1] = { > - .start = DMACH_SPI0_TX, > - .end = DMACH_SPI0_TX, > - .flags = IORESOURCE_DMA, > - }, > - [2] = { > - .start = DMACH_SPI0_RX, > - .end = DMACH_SPI0_RX, > - .flags = IORESOURCE_DMA, > - }, > - [3] = { > - .start = IRQ_SPI0, > - .end = IRQ_SPI0, > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct s3c64xx_spi_info s5p6440_spi0_pdata = { > - .cfg_gpio = s5p6440_spi_cfg_gpio, > - .fifo_lvl_mask = 0x1ff, > - .rx_lvl_offset = 15, > -}; > - > -static u64 spi_dmamask = DMA_BIT_MASK(32); > - > -struct platform_device s5p6440_device_spi0 = { > - .name = "s3c64xx-spi", > - .id = 0, > - .num_resources = ARRAY_SIZE(s5p6440_spi0_resource), > - .resource = s5p6440_spi0_resource, > - .dev = { > - .dma_mask = &spi_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = &s5p6440_spi0_pdata, > - }, > -}; > - > -static struct resource s5p6440_spi1_resource[] = { > - [0] = { > - .start = S5P6440_PA_SPI1, > - .end = S5P6440_PA_SPI1 + 0x100 - 1, > - .flags = IORESOURCE_MEM, > - }, > - [1] = { > - .start = DMACH_SPI1_TX, > - .end = DMACH_SPI1_TX, > - .flags = IORESOURCE_DMA, > - }, > - [2] = { > - .start = DMACH_SPI1_RX, > - .end = DMACH_SPI1_RX, > - .flags = IORESOURCE_DMA, > - }, > - [3] = { > - .start = IRQ_SPI1, > - .end = IRQ_SPI1, > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct s3c64xx_spi_info s5p6440_spi1_pdata = { > - .cfg_gpio = s5p6440_spi_cfg_gpio, > - .fifo_lvl_mask = 0x7f, > - .rx_lvl_offset = 15, > -}; > - > -struct platform_device s5p6440_device_spi1 = { > - .name = "s3c64xx-spi", > - .id = 1, > - .num_resources = ARRAY_SIZE(s5p6440_spi1_resource), > - .resource = s5p6440_spi1_resource, > - .dev = { > - .dma_mask = &spi_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = &s5p6440_spi1_pdata, > - }, > -}; > - > -void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) > -{ > - struct s3c64xx_spi_info *pd; > - > - /* Reject invalid configuration */ > - if (!num_cs || src_clk_nr < 0 > - || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { > - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > - return; > - } > - > - switch (cntrlr) { > - case 0: > - pd = &s5p6440_spi0_pdata; > - break; > - case 1: > - pd = &s5p6440_spi1_pdata; > - break; > - default: > - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", > - __func__, cntrlr); > - return; > - } > - > - pd->num_cs = num_cs; > - pd->src_clk_nr = src_clk_nr; > - pd->src_clk_name = spi_src_clks[src_clk_nr]; > -} > diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h > deleted file mode 100644 > index 5fbca50..0000000 > --- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h > +++ /dev/null > @@ -1,17 +0,0 @@ > -/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h > - * > - * Copyright (C) 2010 Samsung Electronics Co. Ltd. > - * Jaswinder Singh <jassi.brar@samsung.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -#ifndef __S5P6440_PLAT_SPI_CLKS_H > -#define __S5P6440_PLAT_SPI_CLKS_H __FILE__ > - > -#define S5P6440_SPI_SRCCLK_PCLK 0 > -#define S5P6440_SPI_SRCCLK_SCLK 1 > - > -#endif /* __S5P6440_PLAT_SPI_CLKS_H */ > diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c > new file mode 100644 > index 0000000..ac7cfce > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/dev-audio.c > @@ -0,0 +1,164 @@ > +/* linux/arch/arm/mach-s5p64x0/dev-audio.c > + * > + * Copyright (c) 2010 Samsung Electronics Co. Ltd > + * Jaswinder Singh <jassi.brar@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/platform_device.h> > +#include <linux/dma-mapping.h> > +#include <linux/gpio.h> > + > +#include <plat/gpio-cfg.h> > +#include <plat/audio.h> > + > +#include <mach/map.h> > +#include <mach/dma.h> > +#include <mach/irqs.h> > + > +static int s5p6440_cfg_i2s(struct platform_device *pdev) > +{ > + /* configure GPIO for i2s port */ > + switch (pdev->id) { > + case -1: > + s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); > + break; > + > + default: > + printk(KERN_ERR "Invalid Device %d\n", pdev->id); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int s5p6450_cfg_i2s(struct platform_device *pdev) > +{ > + /* configure GPIO for i2s port */ > + switch (pdev->id) { > + case -1: > + s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5)); > + s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5)); > + break; > + > + default: > + printk(KERN_ERR "Invalid Device %d\n", pdev->id); > + return -EINVAL; > + } > + > + return 0; > +} S5P6450 has 2 I2S_v2 and 1 I2S_v4, the first two are missing. Also missing are 3 PCM device definitions. > + > +static struct s3c_audio_pdata s5p6440_i2s_pdata = { > + .cfg_gpio = s5p6440_cfg_i2s, > +}; > + > +static struct s3c_audio_pdata s5p6450_i2s_pdata = { > + .cfg_gpio = s5p6450_cfg_i2s, > +}; > + > +static struct resource s5p64x0_iis0_resource[] = { > + [0] = { > + .start = S5P64X0_PA_I2S, > + .end = S5P64X0_PA_I2S + 0x100 - 1, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = DMACH_I2S0_TX, > + .end = DMACH_I2S0_TX, > + .flags = IORESOURCE_DMA, > + }, > + [2] = { > + .start = DMACH_I2S0_RX, > + .end = DMACH_I2S0_RX, > + .flags = IORESOURCE_DMA, > + }, > +}; > + > +struct platform_device s5p6440_device_iis = { > + .name = "s3c64x0-iis-v4", The assigned name is wrong. It should be "s3c64xx-iis-v4" > + .id = -1, > + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), > + .resource = s5p64x0_iis0_resource, > + .dev = { > + .platform_data = &s5p6440_i2s_pdata, > + }, > +}; > + > +struct platform_device s5p6450_device_iis0 = { > + .name = "s3c64x0-iis-v4", The assigned name is wrong. It should be "s3c64xx-iis-v4" > + .id = -1, > + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), > + .resource = s5p64x0_iis0_resource, > + .dev = { > + .platform_data = &s5p6450_i2s_pdata, > + }, > +}; > + > +/* PCM Controller platform_devices */ > + > +static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) > +{ > + switch (pdev->id) { > + case 0: > + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); > + break; > + > + default: > + printk(KERN_DEBUG "Invalid PCM Controller number!"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static struct s3c_audio_pdata s5p6440_pcm_pdata = { > + .cfg_gpio = s5p6440_pcm_cfg_gpio, > +}; > + > +static struct resource s5p6440_pcm0_resource[] = { > + [0] = { > + .start = S5P64X0_PA_PCM, > + .end = S5P64X0_PA_PCM + 0x100 - 1, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = DMACH_PCM0_TX, > + .end = DMACH_PCM0_TX, > + .flags = IORESOURCE_DMA, > + }, > + [2] = { > + .start = DMACH_PCM0_RX, > + .end = DMACH_PCM0_RX, > + .flags = IORESOURCE_DMA, > + }, > +}; > + > +struct platform_device s5p6440_device_pcm = { > + .name = "samsung-pcm", > + .id = 0, > + .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), > + .resource = s5p6440_pcm0_resource, > + .dev = { > + .platform_data = &s5p6440_pcm_pdata, > + }, > +}; > diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c > new file mode 100644 > index 0000000..7303d3a > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/dev-spi.c > @@ -0,0 +1,275 @@ > +/* linux/arch/arm/mach-s5p64x0/dev-spi.c > + * > + * Copyright (C) 2010 Samsung Electronics Co. Ltd. > + * Jaswinder Singh <jassi.brar@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/platform_device.h> > +#include <linux/dma-mapping.h> > +#include <linux/gpio.h> > + > +#include <mach/dma.h> > +#include <mach/map.h> > +#include <mach/irqs.h> > +#include <mach/spi-clocks.h> > + > +#include <plat/s3c64x0-spi.h> > +#include <plat/gpio-cfg.h> > + > +static char *s5p6440_spi_src_clks[] = { > + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > + [S5P64X0_SPI_SRCCLK_SCLK] = "spi_epll", > +}; > + > +static char *s5p6450_spi_src_clks[] = { > + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > + [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", > +}; Maybe we can drop one and call the other s5p64x0_spi_src_clks The second clock is the same but only named differently. > + > +/* SPI Controller platform_devices */ > + > +/* Since we emulate multi-cs capability, we do not touch the CS. > + * The emulated CS is toggled by board specific mechanism, as it can > + * be either some immediate GPIO or some signal out of some other > + * chip in between ... or some yet another way. > + * We simply do not assume anything about CS. > + */ > +static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) > +{ > + switch (pdev->id) { > + case 0: > + s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); > + s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); > + break; > + > + case 1: > + s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); > + s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); > + break; > + > + default: > + dev_err(&pdev->dev, "Invalid SPI Controller number!"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) > +{ > + switch (pdev->id) { > + case 0: > + s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2)); > + s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP); > + break; > + > + case 1: > + s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2)); > + s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2)); > + s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP); > + s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP); > + break; > + > + default: > + dev_err(&pdev->dev, "Invalid SPI Controller number!"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static struct resource s5p64x0_spi0_resource[] = { > + [0] = { > + .start = S5P64X0_PA_SPI0, > + .end = S5P64X0_PA_SPI0 + 0x100 - 1, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = DMACH_SPI0_TX, > + .end = DMACH_SPI0_TX, > + .flags = IORESOURCE_DMA, > + }, > + [2] = { > + .start = DMACH_SPI0_RX, > + .end = DMACH_SPI0_RX, > + .flags = IORESOURCE_DMA, > + }, > + [3] = { > + .start = IRQ_SPI0, > + .end = IRQ_SPI0, > + .flags = IORESOURCE_IRQ, > + }, > +}; > + > +static struct s3c64x0_spi_info s5p6440_spi0_pdata = { > + .cfg_gpio = s5p6440_spi_cfg_gpio, > + .fifo_lvl_mask = 0x1ff, > + .rx_lvl_offset = 15, > +}; I think you forgot to compile check in hurry ? There is no s3c64x0_spi_info, but only s3c64xx_spi_info > + > +static struct s3c64x0_spi_info s5p6450_spi0_pdata = { > + .cfg_gpio = s5p6450_spi_cfg_gpio, > + .fifo_lvl_mask = 0x1ff, > + .rx_lvl_offset = 15, > +}; > + > +static u64 spi_dmamask = DMA_BIT_MASK(32); > + > +struct platform_device s5p6440_device_spi0 = { > + .name = "s3c64x0-spi", %s/64xx/64x0 ? :) The device name should be kept same "s3c64xx-spi" > + .id = 0, > + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), > + .resource = s5p64x0_spi0_resource, > + .dev = { > + .dma_mask = &spi_dmamask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + .platform_data = &s5p6440_spi0_pdata, > + }, > +}; > + > +struct platform_device s5p6450_device_spi0 = { > + .name = "s3c64x0-spi", same here > + .id = 0, > + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), > + .resource = s5p64x0_spi0_resource, > + .dev = { > + .dma_mask = &spi_dmamask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + .platform_data = &s5p6450_spi0_pdata, > + }, > +}; > + > +static struct resource s5p64x0_spi1_resource[] = { > + [0] = { > + .start = S5P64X0_PA_SPI1, > + .end = S5P64X0_PA_SPI1 + 0x100 - 1, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = DMACH_SPI1_TX, > + .end = DMACH_SPI1_TX, > + .flags = IORESOURCE_DMA, > + }, > + [2] = { > + .start = DMACH_SPI1_RX, > + .end = DMACH_SPI1_RX, > + .flags = IORESOURCE_DMA, > + }, > + [3] = { > + .start = IRQ_SPI1, > + .end = IRQ_SPI1, > + .flags = IORESOURCE_IRQ, > + }, > +}; > + > +static struct s3c64x0_spi_info s5p6440_spi1_pdata = { > + .cfg_gpio = s5p6440_spi_cfg_gpio, > + .fifo_lvl_mask = 0x7f, > + .rx_lvl_offset = 15, > +}; > + > +static struct s3c64x0_spi_info s5p6450_spi1_pdata = { > + .cfg_gpio = s5p6450_spi_cfg_gpio, > + .fifo_lvl_mask = 0x7f, > + .rx_lvl_offset = 15, > +}; > + > +struct platform_device s5p6440_device_spi1 = { > + .name = "s3c64x0-spi", same here... > + .id = 1, > + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), > + .resource = s5p64x0_spi1_resource, > + .dev = { > + .dma_mask = &spi_dmamask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + .platform_data = &s5p6440_spi1_pdata, > + }, > +}; > + > +struct platform_device s5p6450_device_spi1 = { > + .name = "s3c64x0-spi", same here .... > + .id = 1, > + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), > + .resource = s5p64x0_spi1_resource, > + .dev = { > + .dma_mask = &spi_dmamask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + .platform_data = &s5p6450_spi1_pdata, > + }, > +}; > + > +void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) maybe we could call it s5p64x0_spi_set_info, and remove other other one ? > +{ > + struct s3c64x0_spi_info *pd; > + > + /* Reject invalid configuration */ > + if (!num_cs || src_clk_nr < 0 > + || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { you need to change all references to S5P6440_SPI_SRCCLK_..... as well. > + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > + return; > + } > + > + switch (cntrlr) { > + case 0: > + pd = &s5p6440_spi0_pdata; > + break; > + case 1: > + pd = &s5p6440_spi1_pdata; > + break; > + default: > + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", > + __func__, cntrlr); > + return; > + } > + > + pd->num_cs = num_cs; > + pd->src_clk_nr = src_clk_nr; > + pd->src_clk_name = s5p6440_spi_src_clks[src_clk_nr]; > +} > + > +void __init s5p6450_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) > +{ > + struct s3c64x0_spi_info *pd; > + > + /* Reject invalid configuration */ > + if (!num_cs || src_clk_nr < 0 > + || src_clk_nr > S5P6450_SPI_SRCCLK_SCLK) { > + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > + return; > + } > + > + switch (cntrlr) { > + case 0: > + pd = &s5p6450_spi0_pdata; > + break; > + case 1: > + pd = &s5p6450_spi1_pdata; > + break; > + default: > + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", > + __func__, cntrlr); > + return; > + } > + > + pd->num_cs = num_cs; > + pd->src_clk_nr = src_clk_nr; > + pd->src_clk_name = s5p6450_spi_src_clks[src_clk_nr]; > +} > diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > new file mode 100644 > index 0000000..170a20a > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > @@ -0,0 +1,20 @@ > +/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > + * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com ^^^ This notice is redundant > + * > + * Copyright (C) 2010 Samsung Electronics Co. Ltd. > + * Jaswinder Singh <jassi.brar@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#ifndef __ASM_ARCH_SPI_CLKS_H > +#define __ASM_ARCH_SPI_CLKS_H __FILE__ > + > +#define S5P64X0_SPI_SRCCLK_PCLK 0 > +#define S5P64X0_SPI_SRCCLK_SCLK 1 > + > +#endif /* __ASM_ARCH_SPI_CLKS_H */ > diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h > index 85f6f23..10d0d3c 100644 > --- a/arch/arm/plat-samsung/include/plat/devs.h > +++ b/arch/arm/plat-samsung/include/plat/devs.h > @@ -67,6 +67,8 @@ extern struct platform_device s5pv210_device_spi0; > extern struct platform_device s5pv210_device_spi1; > extern struct platform_device s5p6440_device_spi0; > extern struct platform_device s5p6440_device_spi1; > +extern struct platform_device s5p6450_device_spi0; > +extern struct platform_device s5p6450_device_spi1; > > extern struct platform_device s3c_device_hwmon; > > @@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi; > extern struct platform_device s5p6440_device_pcm; > extern struct platform_device s5p6440_device_iis; > > +extern struct platform_device s5p6450_device_iis0; > +extern struct platform_device s5p6450_device_pcm0; > + > extern struct platform_device s5pc100_device_ac97; > extern struct platform_device s5pc100_device_pcm0; > extern struct platform_device s5pc100_device_pcm1; > -- > 1.6.2.5 just to say the least. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 07/13] ARM: S5P64X0: Update Audio support @ 2010-09-02 1:44 ` Jassi Brar 0 siblings, 0 replies; 52+ messages in thread From: Jassi Brar @ 2010-09-02 1:44 UTC (permalink / raw) To: linux-arm-kernel On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > Cc: Jassi Brar <jassi.brar@samsung.com> > --- > ?arch/arm/mach-s5p6440/dev-audio.c ? ? ? ? ? ? ? | ?127 ----------- > ?arch/arm/mach-s5p6440/dev-spi.c ? ? ? ? ? ? ? ? | ?176 --------------- > ?arch/arm/mach-s5p6440/include/mach/spi-clocks.h | ? 17 -- > ?arch/arm/mach-s5p64x0/dev-audio.c ? ? ? ? ? ? ? | ?164 ++++++++++++++ > ?arch/arm/mach-s5p64x0/dev-spi.c ? ? ? ? ? ? ? ? | ?275 +++++++++++++++++++++++ > ?arch/arm/mach-s5p64x0/include/mach/spi-clocks.h | ? 20 ++ > ?arch/arm/plat-samsung/include/plat/devs.h ? ? ? | ? ?5 + > ?7 files changed, 464 insertions(+), 320 deletions(-) > ?delete mode 100644 arch/arm/mach-s5p6440/dev-audio.c > ?delete mode 100644 arch/arm/mach-s5p6440/dev-spi.c > ?delete mode 100644 arch/arm/mach-s5p6440/include/mach/spi-clocks.h > ?create mode 100644 arch/arm/mach-s5p64x0/dev-audio.c > ?create mode 100644 arch/arm/mach-s5p64x0/dev-spi.c > ?create mode 100644 arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > > diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c > deleted file mode 100644 > index 3ca0d2b..0000000 > --- a/arch/arm/mach-s5p6440/dev-audio.c > +++ /dev/null > @@ -1,127 +0,0 @@ > -/* linux/arch/arm/mach-s5p6440/dev-audio.c > - * > - * Copyright (c) 2010 Samsung Electronics Co. Ltd > - * ? ? Jaswinder Singh <jassi.brar@samsung.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -#include <linux/platform_device.h> > -#include <linux/dma-mapping.h> > -#include <linux/gpio.h> > - > -#include <plat/gpio-cfg.h> > -#include <plat/audio.h> > - > -#include <mach/map.h> > -#include <mach/dma.h> > -#include <mach/irqs.h> > - > -static int s5p6440_cfg_i2s(struct platform_device *pdev) > -{ > - ? ? ? /* configure GPIO for i2s port */ > - ? ? ? switch (pdev->id) { > - ? ? ? case -1: > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); > - ? ? ? ? ? ? ? break; > - > - ? ? ? default: > - ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Device %d\n", pdev->id); > - ? ? ? ? ? ? ? return -EINVAL; > - ? ? ? } > - > - ? ? ? return 0; > -} > - > -static struct s3c_audio_pdata s3c_i2s_pdata = { > - ? ? ? .cfg_gpio = s5p6440_cfg_i2s, > -}; > - > -static struct resource s5p6440_iis0_resource[] = { > - ? ? ? [0] = { > - ? ? ? ? ? ? ? .start = S5P6440_PA_I2S, > - ? ? ? ? ? ? ? .end ? = S5P6440_PA_I2S + 0x100 - 1, > - ? ? ? ? ? ? ? .flags = IORESOURCE_MEM, > - ? ? ? }, > - ? ? ? [1] = { > - ? ? ? ? ? ? ? .start = DMACH_I2S0_TX, > - ? ? ? ? ? ? ? .end ? = DMACH_I2S0_TX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > - ? ? ? [2] = { > - ? ? ? ? ? ? ? .start = DMACH_I2S0_RX, > - ? ? ? ? ? ? ? .end ? = DMACH_I2S0_RX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > -}; > - > -struct platform_device s5p6440_device_iis = { > - ? ? ? .name ? ? ? ? ? ? = "s3c64xx-iis-v4", > - ? ? ? .id ? ? ? ? ? ? ? = -1, > - ? ? ? .num_resources ? ?= ARRAY_SIZE(s5p6440_iis0_resource), > - ? ? ? .resource ? ? ? ? = s5p6440_iis0_resource, > - ? ? ? .dev = { > - ? ? ? ? ? ? ? .platform_data = &s3c_i2s_pdata, > - ? ? ? }, > -}; > - > -/* PCM Controller platform_devices */ > - > -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) > -{ > - ? ? ? switch (pdev->id) { > - ? ? ? case 0: > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? break; > - > - ? ? ? default: > - ? ? ? ? ? ? ? printk(KERN_DEBUG "Invalid PCM Controller number!"); > - ? ? ? ? ? ? ? return -EINVAL; > - ? ? ? } > - > - ? ? ? return 0; > -} > - > -static struct s3c_audio_pdata s3c_pcm_pdata = { > - ? ? ? .cfg_gpio = s5p6440_pcm_cfg_gpio, > -}; > - > -static struct resource s5p6440_pcm0_resource[] = { > - ? ? ? [0] = { > - ? ? ? ? ? ? ? .start = S5P6440_PA_PCM, > - ? ? ? ? ? ? ? .end ? = S5P6440_PA_PCM + 0x100 - 1, > - ? ? ? ? ? ? ? .flags = IORESOURCE_MEM, > - ? ? ? }, > - ? ? ? [1] = { > - ? ? ? ? ? ? ? .start = DMACH_PCM0_TX, > - ? ? ? ? ? ? ? .end ? = DMACH_PCM0_TX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > - ? ? ? [2] = { > - ? ? ? ? ? ? ? .start = DMACH_PCM0_RX, > - ? ? ? ? ? ? ? .end ? = DMACH_PCM0_RX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > -}; > - > -struct platform_device s5p6440_device_pcm = { > - ? ? ? .name ? ? ? ? ? ? = "samsung-pcm", > - ? ? ? .id ? ? ? ? ? ? ? = 0, > - ? ? ? .num_resources ? ?= ARRAY_SIZE(s5p6440_pcm0_resource), > - ? ? ? .resource ? ? ? ? = s5p6440_pcm0_resource, > - ? ? ? .dev = { > - ? ? ? ? ? ? ? .platform_data = &s3c_pcm_pdata, > - ? ? ? }, > -}; > diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c > deleted file mode 100644 > index 510af44..0000000 > --- a/arch/arm/mach-s5p6440/dev-spi.c > +++ /dev/null > @@ -1,176 +0,0 @@ > -/* linux/arch/arm/mach-s5p6440/dev-spi.c > - * > - * Copyright (C) 2010 Samsung Electronics Co. Ltd. > - * ? ? Jaswinder Singh <jassi.brar@samsung.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -#include <linux/platform_device.h> > -#include <linux/dma-mapping.h> > -#include <linux/gpio.h> > - > -#include <mach/dma.h> > -#include <mach/map.h> > -#include <mach/irqs.h> > -#include <mach/spi-clocks.h> > - > -#include <plat/s3c64xx-spi.h> > -#include <plat/gpio-cfg.h> > - > -static char *spi_src_clks[] = { > - ? ? ? [S5P6440_SPI_SRCCLK_PCLK] = "pclk", > - ? ? ? [S5P6440_SPI_SRCCLK_SCLK] = "spi_epll", > -}; > - > -/* SPI Controller platform_devices */ > - > -/* Since we emulate multi-cs capability, we do not touch the CS. > - * The emulated CS is toggled by board specific mechanism, as it can > - * be either some immediate GPIO or some signal out of some other > - * chip in between ... or some yet another way. > - * We simply do not assume anything about CS. > - */ > -static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) > -{ > - ? ? ? switch (pdev->id) { > - ? ? ? case 0: > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); > - ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); > - ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); > - ? ? ? ? ? ? ? break; > - > - ? ? ? case 1: > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); > - ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); > - ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); > - ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); > - ? ? ? ? ? ? ? break; > - > - ? ? ? default: > - ? ? ? ? ? ? ? dev_err(&pdev->dev, "Invalid SPI Controller number!"); > - ? ? ? ? ? ? ? return -EINVAL; > - ? ? ? } > - > - ? ? ? return 0; > -} > - > -static struct resource s5p6440_spi0_resource[] = { > - ? ? ? [0] = { > - ? ? ? ? ? ? ? .start = S5P6440_PA_SPI0, > - ? ? ? ? ? ? ? .end ? = S5P6440_PA_SPI0 + 0x100 - 1, > - ? ? ? ? ? ? ? .flags = IORESOURCE_MEM, > - ? ? ? }, > - ? ? ? [1] = { > - ? ? ? ? ? ? ? .start = DMACH_SPI0_TX, > - ? ? ? ? ? ? ? .end ? = DMACH_SPI0_TX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > - ? ? ? [2] = { > - ? ? ? ? ? ? ? .start = DMACH_SPI0_RX, > - ? ? ? ? ? ? ? .end ? = DMACH_SPI0_RX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > - ? ? ? [3] = { > - ? ? ? ? ? ? ? .start = IRQ_SPI0, > - ? ? ? ? ? ? ? .end ? = IRQ_SPI0, > - ? ? ? ? ? ? ? .flags = IORESOURCE_IRQ, > - ? ? ? }, > -}; > - > -static struct s3c64xx_spi_info s5p6440_spi0_pdata = { > - ? ? ? .cfg_gpio = s5p6440_spi_cfg_gpio, > - ? ? ? .fifo_lvl_mask = 0x1ff, > - ? ? ? .rx_lvl_offset = 15, > -}; > - > -static u64 spi_dmamask = DMA_BIT_MASK(32); > - > -struct platform_device s5p6440_device_spi0 = { > - ? ? ? .name ? ? ? ? ? ? = "s3c64xx-spi", > - ? ? ? .id ? ? ? ? ? ? ? = 0, > - ? ? ? .num_resources ? ?= ARRAY_SIZE(s5p6440_spi0_resource), > - ? ? ? .resource ? ? ? ? = s5p6440_spi0_resource, > - ? ? ? .dev = { > - ? ? ? ? ? ? ? .dma_mask ? ? ? ? ? ? ? = &spi_dmamask, > - ? ? ? ? ? ? ? .coherent_dma_mask ? ? ?= DMA_BIT_MASK(32), > - ? ? ? ? ? ? ? .platform_data = &s5p6440_spi0_pdata, > - ? ? ? }, > -}; > - > -static struct resource s5p6440_spi1_resource[] = { > - ? ? ? [0] = { > - ? ? ? ? ? ? ? .start = S5P6440_PA_SPI1, > - ? ? ? ? ? ? ? .end ? = S5P6440_PA_SPI1 + 0x100 - 1, > - ? ? ? ? ? ? ? .flags = IORESOURCE_MEM, > - ? ? ? }, > - ? ? ? [1] = { > - ? ? ? ? ? ? ? .start = DMACH_SPI1_TX, > - ? ? ? ? ? ? ? .end ? = DMACH_SPI1_TX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > - ? ? ? [2] = { > - ? ? ? ? ? ? ? .start = DMACH_SPI1_RX, > - ? ? ? ? ? ? ? .end ? = DMACH_SPI1_RX, > - ? ? ? ? ? ? ? .flags = IORESOURCE_DMA, > - ? ? ? }, > - ? ? ? [3] = { > - ? ? ? ? ? ? ? .start = IRQ_SPI1, > - ? ? ? ? ? ? ? .end ? = IRQ_SPI1, > - ? ? ? ? ? ? ? .flags = IORESOURCE_IRQ, > - ? ? ? }, > -}; > - > -static struct s3c64xx_spi_info s5p6440_spi1_pdata = { > - ? ? ? .cfg_gpio = s5p6440_spi_cfg_gpio, > - ? ? ? .fifo_lvl_mask = 0x7f, > - ? ? ? .rx_lvl_offset = 15, > -}; > - > -struct platform_device s5p6440_device_spi1 = { > - ? ? ? .name ? ? ? ? ? ? = "s3c64xx-spi", > - ? ? ? .id ? ? ? ? ? ? ? = 1, > - ? ? ? .num_resources ? ?= ARRAY_SIZE(s5p6440_spi1_resource), > - ? ? ? .resource ? ? ? ? = s5p6440_spi1_resource, > - ? ? ? .dev = { > - ? ? ? ? ? ? ? .dma_mask ? ? ? ? ? ? ? = &spi_dmamask, > - ? ? ? ? ? ? ? .coherent_dma_mask ? ? ?= DMA_BIT_MASK(32), > - ? ? ? ? ? ? ? .platform_data = &s5p6440_spi1_pdata, > - ? ? ? }, > -}; > - > -void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) > -{ > - ? ? ? struct s3c64xx_spi_info *pd; > - > - ? ? ? /* Reject invalid configuration */ > - ? ? ? if (!num_cs || src_clk_nr < 0 > - ? ? ? ? ? ? ? ? ? ? ? || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { > - ? ? ? ? ? ? ? printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > - ? ? ? ? ? ? ? return; > - ? ? ? } > - > - ? ? ? switch (cntrlr) { > - ? ? ? case 0: > - ? ? ? ? ? ? ? pd = &s5p6440_spi0_pdata; > - ? ? ? ? ? ? ? break; > - ? ? ? case 1: > - ? ? ? ? ? ? ? pd = &s5p6440_spi1_pdata; > - ? ? ? ? ? ? ? break; > - ? ? ? default: > - ? ? ? ? ? ? ? printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? __func__, cntrlr); > - ? ? ? ? ? ? ? return; > - ? ? ? } > - > - ? ? ? pd->num_cs = num_cs; > - ? ? ? pd->src_clk_nr = src_clk_nr; > - ? ? ? pd->src_clk_name = spi_src_clks[src_clk_nr]; > -} > diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h > deleted file mode 100644 > index 5fbca50..0000000 > --- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h > +++ /dev/null > @@ -1,17 +0,0 @@ > -/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h > - * > - * Copyright (C) 2010 Samsung Electronics Co. Ltd. > - * ? ? Jaswinder Singh <jassi.brar@samsung.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -#ifndef __S5P6440_PLAT_SPI_CLKS_H > -#define __S5P6440_PLAT_SPI_CLKS_H __FILE__ > - > -#define S5P6440_SPI_SRCCLK_PCLK ? ? ? ? ? ? ? ?0 > -#define S5P6440_SPI_SRCCLK_SCLK ? ? ? ? ? ? ? ?1 > - > -#endif /* __S5P6440_PLAT_SPI_CLKS_H */ > diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c > new file mode 100644 > index 0000000..ac7cfce > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/dev-audio.c > @@ -0,0 +1,164 @@ > +/* linux/arch/arm/mach-s5p64x0/dev-audio.c > + * > + * Copyright (c) 2010 Samsung Electronics Co. Ltd > + * ? ? Jaswinder Singh <jassi.brar@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/platform_device.h> > +#include <linux/dma-mapping.h> > +#include <linux/gpio.h> > + > +#include <plat/gpio-cfg.h> > +#include <plat/audio.h> > + > +#include <mach/map.h> > +#include <mach/dma.h> > +#include <mach/irqs.h> > + > +static int s5p6440_cfg_i2s(struct platform_device *pdev) > +{ > + ? ? ? /* configure GPIO for i2s port */ > + ? ? ? switch (pdev->id) { > + ? ? ? case -1: > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? break; > + > + ? ? ? default: > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Device %d\n", pdev->id); > + ? ? ? ? ? ? ? return -EINVAL; > + ? ? ? } > + > + ? ? ? return 0; > +} > + > +static int s5p6450_cfg_i2s(struct platform_device *pdev) > +{ > + ? ? ? /* configure GPIO for i2s port */ > + ? ? ? switch (pdev->id) { > + ? ? ? case -1: > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5)); > + ? ? ? ? ? ? ? break; > + > + ? ? ? default: > + ? ? ? ? ? ? ? printk(KERN_ERR "Invalid Device %d\n", pdev->id); > + ? ? ? ? ? ? ? return -EINVAL; > + ? ? ? } > + > + ? ? ? return 0; > +} S5P6450 has 2 I2S_v2 and 1 I2S_v4, the first two are missing. Also missing are 3 PCM device definitions. > + > +static struct s3c_audio_pdata s5p6440_i2s_pdata = { > + ? ? ? .cfg_gpio = s5p6440_cfg_i2s, > +}; > + > +static struct s3c_audio_pdata s5p6450_i2s_pdata = { > + ? ? ? .cfg_gpio = s5p6450_cfg_i2s, > +}; > + > +static struct resource s5p64x0_iis0_resource[] = { > + ? ? ? [0] = { > + ? ? ? ? ? ? ? .start ?= S5P64X0_PA_I2S, > + ? ? ? ? ? ? ? .end ? ?= S5P64X0_PA_I2S + 0x100 - 1, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM, > + ? ? ? }, > + ? ? ? [1] = { > + ? ? ? ? ? ? ? .start ?= DMACH_I2S0_TX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_I2S0_TX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > + ? ? ? [2] = { > + ? ? ? ? ? ? ? .start ?= DMACH_I2S0_RX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_I2S0_RX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > +}; > + > +struct platform_device s5p6440_device_iis = { > + ? ? ? .name ? ? ? ? ? = "s3c64x0-iis-v4", The assigned name is wrong. It should be "s3c64xx-iis-v4" > + ? ? ? .id ? ? ? ? ? ? = -1, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_iis0_resource), > + ? ? ? .resource ? ? ? = s5p64x0_iis0_resource, > + ? ? ? .dev = { > + ? ? ? ? ? ? ? .platform_data = &s5p6440_i2s_pdata, > + ? ? ? }, > +}; > + > +struct platform_device s5p6450_device_iis0 = { > + ? ? ? .name ? ? ? ? ? = "s3c64x0-iis-v4", The assigned name is wrong. It should be "s3c64xx-iis-v4" > + ? ? ? .id ? ? ? ? ? ? = -1, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_iis0_resource), > + ? ? ? .resource ? ? ? = s5p64x0_iis0_resource, > + ? ? ? .dev = { > + ? ? ? ? ? ? ? .platform_data = &s5p6450_i2s_pdata, > + ? ? ? }, > +}; > + > +/* PCM Controller platform_devices */ > + > +static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) > +{ > + ? ? ? switch (pdev->id) { > + ? ? ? case 0: > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? break; > + > + ? ? ? default: > + ? ? ? ? ? ? ? printk(KERN_DEBUG "Invalid PCM Controller number!"); > + ? ? ? ? ? ? ? return -EINVAL; > + ? ? ? } > + > + ? ? ? return 0; > +} > + > +static struct s3c_audio_pdata s5p6440_pcm_pdata = { > + ? ? ? .cfg_gpio = s5p6440_pcm_cfg_gpio, > +}; > + > +static struct resource s5p6440_pcm0_resource[] = { > + ? ? ? [0] = { > + ? ? ? ? ? ? ? .start ?= S5P64X0_PA_PCM, > + ? ? ? ? ? ? ? .end ? ?= S5P64X0_PA_PCM + 0x100 - 1, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM, > + ? ? ? }, > + ? ? ? [1] = { > + ? ? ? ? ? ? ? .start ?= DMACH_PCM0_TX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_PCM0_TX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > + ? ? ? [2] = { > + ? ? ? ? ? ? ? .start ?= DMACH_PCM0_RX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_PCM0_RX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > +}; > + > +struct platform_device s5p6440_device_pcm = { > + ? ? ? .name ? ? ? ? ? = "samsung-pcm", > + ? ? ? .id ? ? ? ? ? ? = 0, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p6440_pcm0_resource), > + ? ? ? .resource ? ? ? = s5p6440_pcm0_resource, > + ? ? ? .dev = { > + ? ? ? ? ? ? ? .platform_data = &s5p6440_pcm_pdata, > + ? ? ? }, > +}; > diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c > new file mode 100644 > index 0000000..7303d3a > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/dev-spi.c > @@ -0,0 +1,275 @@ > +/* linux/arch/arm/mach-s5p64x0/dev-spi.c > + * > + * Copyright (C) 2010 Samsung Electronics Co. Ltd. > + * ? ? Jaswinder Singh <jassi.brar@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/platform_device.h> > +#include <linux/dma-mapping.h> > +#include <linux/gpio.h> > + > +#include <mach/dma.h> > +#include <mach/map.h> > +#include <mach/irqs.h> > +#include <mach/spi-clocks.h> > + > +#include <plat/s3c64x0-spi.h> > +#include <plat/gpio-cfg.h> > + > +static char *s5p6440_spi_src_clks[] = { > + ? ? ? [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > + ? ? ? [S5P64X0_SPI_SRCCLK_SCLK] = "spi_epll", > +}; > + > +static char *s5p6450_spi_src_clks[] = { > + ? ? ? [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > + ? ? ? [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", > +}; Maybe we can drop one and call the other s5p64x0_spi_src_clks The second clock is the same but only named differently. > + > +/* SPI Controller platform_devices */ > + > +/* Since we emulate multi-cs capability, we do not touch the CS. > + * The emulated CS is toggled by board specific mechanism, as it can > + * be either some immediate GPIO or some signal out of some other > + * chip in between ... or some yet another way. > + * We simply do not assume anything about CS. > + */ > +static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) > +{ > + ? ? ? switch (pdev->id) { > + ? ? ? case 0: > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? break; > + > + ? ? ? case 1: > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? break; > + > + ? ? ? default: > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Invalid SPI Controller number!"); > + ? ? ? ? ? ? ? return -EINVAL; > + ? ? ? } > + > + ? ? ? return 0; > +} > + > +static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) > +{ > + ? ? ? switch (pdev->id) { > + ? ? ? case 0: > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? break; > + > + ? ? ? case 1: > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2)); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP); > + ? ? ? ? ? ? ? break; > + > + ? ? ? default: > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Invalid SPI Controller number!"); > + ? ? ? ? ? ? ? return -EINVAL; > + ? ? ? } > + > + ? ? ? return 0; > +} > + > +static struct resource s5p64x0_spi0_resource[] = { > + ? ? ? [0] = { > + ? ? ? ? ? ? ? .start ?= S5P64X0_PA_SPI0, > + ? ? ? ? ? ? ? .end ? ?= S5P64X0_PA_SPI0 + 0x100 - 1, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM, > + ? ? ? }, > + ? ? ? [1] = { > + ? ? ? ? ? ? ? .start ?= DMACH_SPI0_TX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_SPI0_TX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > + ? ? ? [2] = { > + ? ? ? ? ? ? ? .start ?= DMACH_SPI0_RX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_SPI0_RX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > + ? ? ? [3] = { > + ? ? ? ? ? ? ? .start ?= IRQ_SPI0, > + ? ? ? ? ? ? ? .end ? ?= IRQ_SPI0, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > +}; > + > +static struct s3c64x0_spi_info s5p6440_spi0_pdata = { > + ? ? ? .cfg_gpio ? ? ? = s5p6440_spi_cfg_gpio, > + ? ? ? .fifo_lvl_mask ?= 0x1ff, > + ? ? ? .rx_lvl_offset ?= 15, > +}; I think you forgot to compile check in hurry ? There is no s3c64x0_spi_info, but only s3c64xx_spi_info > + > +static struct s3c64x0_spi_info s5p6450_spi0_pdata = { > + ? ? ? .cfg_gpio ? ? ? = s5p6450_spi_cfg_gpio, > + ? ? ? .fifo_lvl_mask ?= 0x1ff, > + ? ? ? .rx_lvl_offset ?= 15, > +}; > + > +static u64 spi_dmamask = DMA_BIT_MASK(32); > + > +struct platform_device s5p6440_device_spi0 = { > + ? ? ? .name ? ? ? ? ? = "s3c64x0-spi", %s/64xx/64x0 ? :) The device name should be kept same "s3c64xx-spi" > + ? ? ? .id ? ? ? ? ? ? = 0, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_spi0_resource), > + ? ? ? .resource ? ? ? = s5p64x0_spi0_resource, > + ? ? ? .dev = { > + ? ? ? ? ? ? ? .dma_mask ? ? ? ? ? ? ? = &spi_dmamask, > + ? ? ? ? ? ? ? .coherent_dma_mask ? ? ?= DMA_BIT_MASK(32), > + ? ? ? ? ? ? ? .platform_data = &s5p6440_spi0_pdata, > + ? ? ? }, > +}; > + > +struct platform_device s5p6450_device_spi0 = { > + ? ? ? .name ? ? ? ? ? = "s3c64x0-spi", same here > + ? ? ? .id ? ? ? ? ? ? = 0, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_spi0_resource), > + ? ? ? .resource ? ? ? = s5p64x0_spi0_resource, > + ? ? ? .dev = { > + ? ? ? ? ? ? ? .dma_mask ? ? ? ? ? ? ? = &spi_dmamask, > + ? ? ? ? ? ? ? .coherent_dma_mask ? ? ?= DMA_BIT_MASK(32), > + ? ? ? ? ? ? ? .platform_data = &s5p6450_spi0_pdata, > + ? ? ? }, > +}; > + > +static struct resource s5p64x0_spi1_resource[] = { > + ? ? ? [0] = { > + ? ? ? ? ? ? ? .start ?= S5P64X0_PA_SPI1, > + ? ? ? ? ? ? ? .end ? ?= S5P64X0_PA_SPI1 + 0x100 - 1, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM, > + ? ? ? }, > + ? ? ? [1] = { > + ? ? ? ? ? ? ? .start ?= DMACH_SPI1_TX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_SPI1_TX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > + ? ? ? [2] = { > + ? ? ? ? ? ? ? .start ?= DMACH_SPI1_RX, > + ? ? ? ? ? ? ? .end ? ?= DMACH_SPI1_RX, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_DMA, > + ? ? ? }, > + ? ? ? [3] = { > + ? ? ? ? ? ? ? .start ?= IRQ_SPI1, > + ? ? ? ? ? ? ? .end ? ?= IRQ_SPI1, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > +}; > + > +static struct s3c64x0_spi_info s5p6440_spi1_pdata = { > + ? ? ? .cfg_gpio ? ? ? = s5p6440_spi_cfg_gpio, > + ? ? ? .fifo_lvl_mask ?= 0x7f, > + ? ? ? .rx_lvl_offset ?= 15, > +}; > + > +static struct s3c64x0_spi_info s5p6450_spi1_pdata = { > + ? ? ? .cfg_gpio ? ? ? = s5p6450_spi_cfg_gpio, > + ? ? ? .fifo_lvl_mask ?= 0x7f, > + ? ? ? .rx_lvl_offset ?= 15, > +}; > + > +struct platform_device s5p6440_device_spi1 = { > + ? ? ? .name ? ? ? ? ? = "s3c64x0-spi", same here... > + ? ? ? .id ? ? ? ? ? ? = 1, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_spi1_resource), > + ? ? ? .resource ? ? ? = s5p64x0_spi1_resource, > + ? ? ? .dev = { > + ? ? ? ? ? ? ? .dma_mask ? ? ? ? ? ? ? = &spi_dmamask, > + ? ? ? ? ? ? ? .coherent_dma_mask ? ? ?= DMA_BIT_MASK(32), > + ? ? ? ? ? ? ? .platform_data = &s5p6440_spi1_pdata, > + ? ? ? }, > +}; > + > +struct platform_device s5p6450_device_spi1 = { > + ? ? ? .name ? ? ? ? ? = "s3c64x0-spi", same here .... > + ? ? ? .id ? ? ? ? ? ? = 1, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_spi1_resource), > + ? ? ? .resource ? ? ? = s5p64x0_spi1_resource, > + ? ? ? .dev = { > + ? ? ? ? ? ? ? .dma_mask ? ? ? ? ? ? ? = &spi_dmamask, > + ? ? ? ? ? ? ? .coherent_dma_mask ? ? ?= DMA_BIT_MASK(32), > + ? ? ? ? ? ? ? .platform_data = &s5p6450_spi1_pdata, > + ? ? ? }, > +}; > + > +void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) maybe we could call it s5p64x0_spi_set_info, and remove other other one ? > +{ > + ? ? ? struct s3c64x0_spi_info *pd; > + > + ? ? ? /* Reject invalid configuration */ > + ? ? ? if (!num_cs || src_clk_nr < 0 > + ? ? ? ? ? ? ? ? ? ? ? || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { you need to change all references to S5P6440_SPI_SRCCLK_..... as well. > + ? ? ? ? ? ? ? printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > + ? ? ? ? ? ? ? return; > + ? ? ? } > + > + ? ? ? switch (cntrlr) { > + ? ? ? case 0: > + ? ? ? ? ? ? ? pd = &s5p6440_spi0_pdata; > + ? ? ? ? ? ? ? break; > + ? ? ? case 1: > + ? ? ? ? ? ? ? pd = &s5p6440_spi1_pdata; > + ? ? ? ? ? ? ? break; > + ? ? ? default: > + ? ? ? ? ? ? ? printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? __func__, cntrlr); > + ? ? ? ? ? ? ? return; > + ? ? ? } > + > + ? ? ? pd->num_cs = num_cs; > + ? ? ? pd->src_clk_nr = src_clk_nr; > + ? ? ? pd->src_clk_name = s5p6440_spi_src_clks[src_clk_nr]; > +} > + > +void __init s5p6450_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) > +{ > + ? ? ? struct s3c64x0_spi_info *pd; > + > + ? ? ? /* Reject invalid configuration */ > + ? ? ? if (!num_cs || src_clk_nr < 0 > + ? ? ? ? ? ? ? ? ? ? ? || src_clk_nr > S5P6450_SPI_SRCCLK_SCLK) { > + ? ? ? ? ? ? ? printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > + ? ? ? ? ? ? ? return; > + ? ? ? } > + > + ? ? ? switch (cntrlr) { > + ? ? ? case 0: > + ? ? ? ? ? ? ? pd = &s5p6450_spi0_pdata; > + ? ? ? ? ? ? ? break; > + ? ? ? case 1: > + ? ? ? ? ? ? ? pd = &s5p6450_spi1_pdata; > + ? ? ? ? ? ? ? break; > + ? ? ? default: > + ? ? ? ? ? ? ? printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? __func__, cntrlr); > + ? ? ? ? ? ? ? return; > + ? ? ? } > + > + ? ? ? pd->num_cs = num_cs; > + ? ? ? pd->src_clk_nr = src_clk_nr; > + ? ? ? pd->src_clk_name = s5p6450_spi_src_clks[src_clk_nr]; > +} > diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > new file mode 100644 > index 0000000..170a20a > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > @@ -0,0 +1,20 @@ > +/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > + * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * ? ? ? ? ? ? http://www.samsung.com ^^^ This notice is redundant > + * > + * Copyright (C) 2010 Samsung Electronics Co. Ltd. > + * ? ? Jaswinder Singh <jassi.brar@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#ifndef __ASM_ARCH_SPI_CLKS_H > +#define __ASM_ARCH_SPI_CLKS_H __FILE__ > + > +#define S5P64X0_SPI_SRCCLK_PCLK ? ? ? ? ? ? ? ?0 > +#define S5P64X0_SPI_SRCCLK_SCLK ? ? ? ? ? ? ? ?1 > + > +#endif /* __ASM_ARCH_SPI_CLKS_H */ > diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h > index 85f6f23..10d0d3c 100644 > --- a/arch/arm/plat-samsung/include/plat/devs.h > +++ b/arch/arm/plat-samsung/include/plat/devs.h > @@ -67,6 +67,8 @@ extern struct platform_device s5pv210_device_spi0; > ?extern struct platform_device s5pv210_device_spi1; > ?extern struct platform_device s5p6440_device_spi0; > ?extern struct platform_device s5p6440_device_spi1; > +extern struct platform_device s5p6450_device_spi0; > +extern struct platform_device s5p6450_device_spi1; > > ?extern struct platform_device s3c_device_hwmon; > > @@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi; > ?extern struct platform_device s5p6440_device_pcm; > ?extern struct platform_device s5p6440_device_iis; > > +extern struct platform_device s5p6450_device_iis0; > +extern struct platform_device s5p6450_device_pcm0; > + > ?extern struct platform_device s5pc100_device_ac97; > ?extern struct platform_device s5pc100_device_pcm0; > ?extern struct platform_device s5pc100_device_pcm1; > -- > 1.6.2.5 just to say the least. ^ permalink raw reply [flat|nested] 52+ messages in thread
* RE: [PATCH 07/13] ARM: S5P64X0: Update Audio support 2010-09-02 1:44 ` Jassi Brar @ 2010-09-02 7:30 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 7:30 UTC (permalink / raw) To: 'Jassi Brar' Cc: linux-arm-kernel, linux-samsung-soc, 'Jassi Brar', ben-linux Jassi Brar wrote: > Hi Jassi :-) Thanks for your review. > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > Cc: Jassi Brar <jassi.brar@samsung.com> > > --- > > arch/arm/mach-s5p6440/dev-audio.c | 127 ----------- > > arch/arm/mach-s5p6440/dev-spi.c | 176 --------------- > > arch/arm/mach-s5p6440/include/mach/spi-clocks.h | 17 -- > > arch/arm/mach-s5p64x0/dev-audio.c | 164 ++++++++++++++ > > arch/arm/mach-s5p64x0/dev-spi.c | 275 > +++++++++++++++++++++++ > > arch/arm/mach-s5p64x0/include/mach/spi-clocks.h | 20 ++ > > arch/arm/plat-samsung/include/plat/devs.h | 5 + > > 7 files changed, 464 insertions(+), 320 deletions(-) > > delete mode 100644 arch/arm/mach-s5p6440/dev-audio.c > > delete mode 100644 arch/arm/mach-s5p6440/dev-spi.c > > delete mode 100644 arch/arm/mach-s5p6440/include/mach/spi-clocks.h > > create mode 100644 arch/arm/mach-s5p64x0/dev-audio.c > > create mode 100644 arch/arm/mach-s5p64x0/dev-spi.c > > create mode 100644 arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > > (snip) > > S5P6450 has 2 I2S_v2 and 1 I2S_v4, the first two are missing. > Also missing are 3 PCM device definitions. > Yeah, I know. But the remaining items will be added later. Maybe Mr. Youn will do it ;-) (snip) > > +struct platform_device s5p6440_device_iis = { > > + .name = "s3c64x0-iis-v4", > > The assigned name is wrong. It should be "s3c64xx-iis-v4" > You're right..will fix it. > > > + .id = -1, > > + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), > > + .resource = s5p64x0_iis0_resource, > > + .dev = { > > + .platform_data = &s5p6440_i2s_pdata, > > + }, > > +}; > > + > > +struct platform_device s5p6450_device_iis0 = { > > + .name = "s3c64x0-iis-v4", > > The assigned name is wrong. It should be "s3c64xx-iis-v4" > ok.. > > + .id = -1, > > + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), > > + .resource = s5p64x0_iis0_resource, > > + .dev = { > > + .platform_data = &s5p6450_i2s_pdata, > > + }, > > +}; > > + (snip) > > + > > +static char *s5p6440_spi_src_clks[] = { > > + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > > + [S5P64X0_SPI_SRCCLK_SCLK] = "spi_epll", > > +}; > > + > > +static char *s5p6450_spi_src_clks[] = { > > + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > > + [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", > > +}; > > Maybe we can drop one and call the other s5p64x0_spi_src_clks > The second clock is the same but only named differently. > As you know, we use the clock name as there is in data sheet. Anyway...will sort out. (snip) > > + > > +static struct s3c64x0_spi_info s5p6440_spi0_pdata = { > > + .cfg_gpio = s5p6440_spi_cfg_gpio, > > + .fifo_lvl_mask = 0x1ff, > > + .rx_lvl_offset = 15, > > +}; > > I think you forgot to compile check in hurry ? hahaha, I'm always remembering it :-) about all of s3c and s5p defconfigs. Actually, there is no build error...and kernel booting works well on the board. But I didn't audio test...just moved your original code into the new machine directory. ...And now, not selected S3C64XX_DEV_SPI...so not compiled dev-spi.c. Anyway, I will check all files ;-) Thanks. > There is no s3c64x0_spi_info, but only s3c64xx_spi_info > Yeah, you're right...will fix it. > > + > > +static struct s3c64x0_spi_info s5p6450_spi0_pdata = { > > + .cfg_gpio = s5p6450_spi_cfg_gpio, > > + .fifo_lvl_mask = 0x1ff, > > + .rx_lvl_offset = 15, > > +}; > > + > > +static u64 spi_dmamask = DMA_BIT_MASK(32); > > + > > +struct platform_device s5p6440_device_spi0 = { > > + .name = "s3c64x0-spi", > > %s/64xx/64x0 ? :) Maybe...yes? ;-) > The device name should be kept same "s3c64xx-spi" > It's my mistake...will fix it. > > + .id = 0, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), > > + .resource = s5p64x0_spi0_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6440_spi0_pdata, > > + }, > > +}; > > + > > +struct platform_device s5p6450_device_spi0 = { > > + .name = "s3c64x0-spi", > > same here > ok... > > + .id = 0, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), > > + .resource = s5p64x0_spi0_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6450_spi0_pdata, > > + }, > > +}; (snip) > > + > > +struct platform_device s5p6440_device_spi1 = { > > + .name = "s3c64x0-spi", > > same here... > ok... > > + .id = 1, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), > > + .resource = s5p64x0_spi1_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6440_spi1_pdata, > > + }, > > +}; > > + > > +struct platform_device s5p6450_device_spi1 = { > > + .name = "s3c64x0-spi", > > same here .... > ok... > > + .id = 1, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), > > + .resource = s5p64x0_spi1_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6450_spi1_pdata, > > + }, > > +}; > > + > > +void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) > > maybe we could call it s5p64x0_spi_set_info, and remove other other one ? > mm...will sort out. > > +{ > > + struct s3c64x0_spi_info *pd; > > + > > + /* Reject invalid configuration */ > > + if (!num_cs || src_clk_nr < 0 > > + || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { > you need to change all references to S5P6440_SPI_SRCCLK_..... as well. > Yeah, ok. > > + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > > + return; > > + } > > + (snip) > > just to say the least. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 07/13] ARM: S5P64X0: Update Audio support @ 2010-09-02 7:30 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 7:30 UTC (permalink / raw) To: linux-arm-kernel Jassi Brar wrote: > Hi Jassi :-) Thanks for your review. > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > Cc: Jassi Brar <jassi.brar@samsung.com> > > --- > > arch/arm/mach-s5p6440/dev-audio.c | 127 ----------- > > arch/arm/mach-s5p6440/dev-spi.c | 176 --------------- > > arch/arm/mach-s5p6440/include/mach/spi-clocks.h | 17 -- > > arch/arm/mach-s5p64x0/dev-audio.c | 164 ++++++++++++++ > > arch/arm/mach-s5p64x0/dev-spi.c | 275 > +++++++++++++++++++++++ > > arch/arm/mach-s5p64x0/include/mach/spi-clocks.h | 20 ++ > > arch/arm/plat-samsung/include/plat/devs.h | 5 + > > 7 files changed, 464 insertions(+), 320 deletions(-) > > delete mode 100644 arch/arm/mach-s5p6440/dev-audio.c > > delete mode 100644 arch/arm/mach-s5p6440/dev-spi.c > > delete mode 100644 arch/arm/mach-s5p6440/include/mach/spi-clocks.h > > create mode 100644 arch/arm/mach-s5p64x0/dev-audio.c > > create mode 100644 arch/arm/mach-s5p64x0/dev-spi.c > > create mode 100644 arch/arm/mach-s5p64x0/include/mach/spi-clocks.h > > (snip) > > S5P6450 has 2 I2S_v2 and 1 I2S_v4, the first two are missing. > Also missing are 3 PCM device definitions. > Yeah, I know. But the remaining items will be added later. Maybe Mr. Youn will do it ;-) (snip) > > +struct platform_device s5p6440_device_iis = { > > + .name = "s3c64x0-iis-v4", > > The assigned name is wrong. It should be "s3c64xx-iis-v4" > You're right..will fix it. > > > + .id = -1, > > + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), > > + .resource = s5p64x0_iis0_resource, > > + .dev = { > > + .platform_data = &s5p6440_i2s_pdata, > > + }, > > +}; > > + > > +struct platform_device s5p6450_device_iis0 = { > > + .name = "s3c64x0-iis-v4", > > The assigned name is wrong. It should be "s3c64xx-iis-v4" > ok.. > > + .id = -1, > > + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), > > + .resource = s5p64x0_iis0_resource, > > + .dev = { > > + .platform_data = &s5p6450_i2s_pdata, > > + }, > > +}; > > + (snip) > > + > > +static char *s5p6440_spi_src_clks[] = { > > + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > > + [S5P64X0_SPI_SRCCLK_SCLK] = "spi_epll", > > +}; > > + > > +static char *s5p6450_spi_src_clks[] = { > > + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", > > + [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", > > +}; > > Maybe we can drop one and call the other s5p64x0_spi_src_clks > The second clock is the same but only named differently. > As you know, we use the clock name as there is in data sheet. Anyway...will sort out. (snip) > > + > > +static struct s3c64x0_spi_info s5p6440_spi0_pdata = { > > + .cfg_gpio = s5p6440_spi_cfg_gpio, > > + .fifo_lvl_mask = 0x1ff, > > + .rx_lvl_offset = 15, > > +}; > > I think you forgot to compile check in hurry ? hahaha, I'm always remembering it :-) about all of s3c and s5p defconfigs. Actually, there is no build error...and kernel booting works well on the board. But I didn't audio test...just moved your original code into the new machine directory. ...And now, not selected S3C64XX_DEV_SPI...so not compiled dev-spi.c. Anyway, I will check all files ;-) Thanks. > There is no s3c64x0_spi_info, but only s3c64xx_spi_info > Yeah, you're right...will fix it. > > + > > +static struct s3c64x0_spi_info s5p6450_spi0_pdata = { > > + .cfg_gpio = s5p6450_spi_cfg_gpio, > > + .fifo_lvl_mask = 0x1ff, > > + .rx_lvl_offset = 15, > > +}; > > + > > +static u64 spi_dmamask = DMA_BIT_MASK(32); > > + > > +struct platform_device s5p6440_device_spi0 = { > > + .name = "s3c64x0-spi", > > %s/64xx/64x0 ? :) Maybe...yes? ;-) > The device name should be kept same "s3c64xx-spi" > It's my mistake...will fix it. > > + .id = 0, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), > > + .resource = s5p64x0_spi0_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6440_spi0_pdata, > > + }, > > +}; > > + > > +struct platform_device s5p6450_device_spi0 = { > > + .name = "s3c64x0-spi", > > same here > ok... > > + .id = 0, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), > > + .resource = s5p64x0_spi0_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6450_spi0_pdata, > > + }, > > +}; (snip) > > + > > +struct platform_device s5p6440_device_spi1 = { > > + .name = "s3c64x0-spi", > > same here... > ok... > > + .id = 1, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), > > + .resource = s5p64x0_spi1_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6440_spi1_pdata, > > + }, > > +}; > > + > > +struct platform_device s5p6450_device_spi1 = { > > + .name = "s3c64x0-spi", > > same here .... > ok... > > + .id = 1, > > + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), > > + .resource = s5p64x0_spi1_resource, > > + .dev = { > > + .dma_mask = &spi_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6450_spi1_pdata, > > + }, > > +}; > > + > > +void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) > > maybe we could call it s5p64x0_spi_set_info, and remove other other one ? > mm...will sort out. > > +{ > > + struct s3c64x0_spi_info *pd; > > + > > + /* Reject invalid configuration */ > > + if (!num_cs || src_clk_nr < 0 > > + || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { > you need to change all references to S5P6440_SPI_SRCCLK_..... as well. > Yeah, ok. > > + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); > > + return; > > + } > > + (snip) > > just to say the least. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim, Jassi Brar This patch moves DMA support files in the mach-s5p64x0 for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com> --- arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c | 75 ++++++++++++++++--- .../include/mach/dma.h | 0 arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | 28 +++++++ 3 files changed, 91 insertions(+), 12 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c (56%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/dma.h (100%) diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c similarity index 56% rename from arch/arm/mach-s5p6440/dma.c rename to arch/arm/mach-s5p64x0/dma.c index 07606ad..bc84678 100644 --- a/arch/arm/mach-s5p6440/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -1,4 +1,5 @@ -/* +/* linux/arch/arm/mach-s5p64x0/dma.c + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -15,7 +16,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ +*/ #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -30,11 +31,11 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p6440_pdma_resource[] = { +static struct resource s5p64x0_pdma_resource[] = { [0] = { - .start = S5P6440_PA_PDMA, - .end = S5P6440_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_DMA0, @@ -80,11 +81,48 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = { }, }; +static struct s3c_pl330_platdata s5p6450_pdma_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_UART4_RX, + [9] = DMACH_UART4_TX, + [10] = DMACH_PCM0_TX, + [11] = DMACH_PCM0_RX, + [12] = DMACH_I2S0_TX, + [13] = DMACH_I2S0_RX, + [14] = DMACH_SPI0_TX, + [15] = DMACH_SPI0_RX, + [16] = DMACH_PCM1_TX, + [17] = DMACH_PCM1_RX, + [18] = DMACH_PCM2_TX, + [19] = DMACH_PCM2_RX, + [20] = DMACH_SPI1_TX, + [21] = DMACH_SPI1_RX, + [22] = DMACH_USI_TX, + [23] = DMACH_USI_RX, + [24] = DMACH_MAX, + [25] = DMACH_I2S1_TX, + [26] = DMACH_I2S1_RX, + [27] = DMACH_I2S2_TX, + [28] = DMACH_I2S2_RX, + [29] = DMACH_PWM, + [30] = DMACH_UART5_RX, + [31] = DMACH_UART5_TX, + }, +}; + static struct platform_device s5p6440_device_pdma = { .name = "s3c-pl330", .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_pdma_resource), - .resource = s5p6440_pdma_resource, + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), + .resource = s5p64x0_pdma_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -92,14 +130,27 @@ static struct platform_device s5p6440_device_pdma = { }, }; -static struct platform_device *s5p6440_dmacs[] __initdata = { +static struct platform_device s5p6450_device_pdma = { + .name = "s3c-pl330", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), + .resource = s5p64x0_pdma_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6450_pdma_pdata, + }, +}; + +static struct platform_device *s5p64x0_dmacs[] __initdata = { &s5p6440_device_pdma, + /* &s5p6450_device_pdma will be added */ }; -static int __init s5p6440_dma_init(void) +static int __init s5p64x0_dma_init(void) { - platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs)); + platform_add_devices(s5p64x0_dmacs, ARRAY_SIZE(s5p64x0_dmacs)); return 0; } -arch_initcall(s5p6440_dma_init); +arch_initcall(s5p64x0_dma_init); diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h similarity index 100% rename from arch/arm/mach-s5p6440/include/mach/dma.h rename to arch/arm/mach-s5p64x0/include/mach/dma.h diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h index 5fe6721..333e381 100644 --- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h @@ -32,6 +32,12 @@ enum dma_ch { DMACH_UART2_TX, DMACH_UART3_RX, DMACH_UART3_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_UART5_RX, + DMACH_UART5_TX, + DMACH_USI_RX, + DMACH_USI_TX, DMACH_IRDA, DMACH_I2S0_RX, DMACH_I2S0_TX, @@ -64,6 +70,28 @@ enum dma_ch { DMACH_MSM_REQ2, DMACH_MSM_REQ1, DMACH_MSM_REQ0, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS0AUX_RX, + DMACH_SLIMBUS0AUX_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, + DMACH_MTOM_0, + DMACH_MTOM_1, + DMACH_MTOM_2, + DMACH_MTOM_3, + DMACH_MTOM_4, + DMACH_MTOM_5, + DMACH_MTOM_6, + DMACH_MTOM_7, /* END Marker, also used to denote a reserved channel */ DMACH_MAX, }; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch moves DMA support files in the mach-s5p64x0 for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com> --- arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c | 75 ++++++++++++++++--- .../include/mach/dma.h | 0 arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | 28 +++++++ 3 files changed, 91 insertions(+), 12 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c (56%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/dma.h (100%) diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c similarity index 56% rename from arch/arm/mach-s5p6440/dma.c rename to arch/arm/mach-s5p64x0/dma.c index 07606ad..bc84678 100644 --- a/arch/arm/mach-s5p6440/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -1,4 +1,5 @@ -/* +/* linux/arch/arm/mach-s5p64x0/dma.c + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -15,7 +16,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ +*/ #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -30,11 +31,11 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p6440_pdma_resource[] = { +static struct resource s5p64x0_pdma_resource[] = { [0] = { - .start = S5P6440_PA_PDMA, - .end = S5P6440_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_DMA0, @@ -80,11 +81,48 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = { }, }; +static struct s3c_pl330_platdata s5p6450_pdma_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_UART4_RX, + [9] = DMACH_UART4_TX, + [10] = DMACH_PCM0_TX, + [11] = DMACH_PCM0_RX, + [12] = DMACH_I2S0_TX, + [13] = DMACH_I2S0_RX, + [14] = DMACH_SPI0_TX, + [15] = DMACH_SPI0_RX, + [16] = DMACH_PCM1_TX, + [17] = DMACH_PCM1_RX, + [18] = DMACH_PCM2_TX, + [19] = DMACH_PCM2_RX, + [20] = DMACH_SPI1_TX, + [21] = DMACH_SPI1_RX, + [22] = DMACH_USI_TX, + [23] = DMACH_USI_RX, + [24] = DMACH_MAX, + [25] = DMACH_I2S1_TX, + [26] = DMACH_I2S1_RX, + [27] = DMACH_I2S2_TX, + [28] = DMACH_I2S2_RX, + [29] = DMACH_PWM, + [30] = DMACH_UART5_RX, + [31] = DMACH_UART5_TX, + }, +}; + static struct platform_device s5p6440_device_pdma = { .name = "s3c-pl330", .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_pdma_resource), - .resource = s5p6440_pdma_resource, + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), + .resource = s5p64x0_pdma_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -92,14 +130,27 @@ static struct platform_device s5p6440_device_pdma = { }, }; -static struct platform_device *s5p6440_dmacs[] __initdata = { +static struct platform_device s5p6450_device_pdma = { + .name = "s3c-pl330", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), + .resource = s5p64x0_pdma_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6450_pdma_pdata, + }, +}; + +static struct platform_device *s5p64x0_dmacs[] __initdata = { &s5p6440_device_pdma, + /* &s5p6450_device_pdma will be added */ }; -static int __init s5p6440_dma_init(void) +static int __init s5p64x0_dma_init(void) { - platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs)); + platform_add_devices(s5p64x0_dmacs, ARRAY_SIZE(s5p64x0_dmacs)); return 0; } -arch_initcall(s5p6440_dma_init); +arch_initcall(s5p64x0_dma_init); diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h similarity index 100% rename from arch/arm/mach-s5p6440/include/mach/dma.h rename to arch/arm/mach-s5p64x0/include/mach/dma.h diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h index 5fe6721..333e381 100644 --- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h @@ -32,6 +32,12 @@ enum dma_ch { DMACH_UART2_TX, DMACH_UART3_RX, DMACH_UART3_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_UART5_RX, + DMACH_UART5_TX, + DMACH_USI_RX, + DMACH_USI_TX, DMACH_IRDA, DMACH_I2S0_RX, DMACH_I2S0_TX, @@ -64,6 +70,28 @@ enum dma_ch { DMACH_MSM_REQ2, DMACH_MSM_REQ1, DMACH_MSM_REQ0, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS0AUX_RX, + DMACH_SLIMBUS0AUX_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, + DMACH_MTOM_0, + DMACH_MTOM_1, + DMACH_MTOM_2, + DMACH_MTOM_3, + DMACH_MTOM_4, + DMACH_MTOM_5, + DMACH_MTOM_6, + DMACH_MTOM_7, /* END Marker, also used to denote a reserved channel */ DMACH_MAX, }; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-02 1:08 ` Jassi Brar -1 siblings, 0 replies; 52+ messages in thread From: Jassi Brar @ 2010-09-02 1:08 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, Jassi Brar, ben-linux On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch moves DMA support files in the mach-s5p64x0 > for S5P6440 and S5P6450 SoCs. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > Cc: Jassi Brar <jassi.brar@samsung.com> > --- > arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c | 75 ++++++++++++++++--- > .../include/mach/dma.h | 0 > arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | 28 +++++++ > 3 files changed, 91 insertions(+), 12 deletions(-) > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c (56%) > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/dma.h (100%) > > diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c > similarity index 56% > rename from arch/arm/mach-s5p6440/dma.c > rename to arch/arm/mach-s5p64x0/dma.c > index 07606ad..bc84678 100644 > --- a/arch/arm/mach-s5p6440/dma.c > +++ b/arch/arm/mach-s5p64x0/dma.c > @@ -1,4 +1,5 @@ > -/* > +/* linux/arch/arm/mach-s5p64x0/dma.c > + * > * Copyright (C) 2010 Samsung Electronics Co. Ltd. > * Jaswinder Singh <jassi.brar@samsung.com> > * > @@ -15,7 +16,7 @@ > * You should have received a copy of the GNU General Public License > * along with this program; if not, write to the Free Software > * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > - */ > +*/ > > #include <linux/platform_device.h> > #include <linux/dma-mapping.h> > @@ -30,11 +31,11 @@ > > static u64 dma_dmamask = DMA_BIT_MASK(32); > > -static struct resource s5p6440_pdma_resource[] = { > +static struct resource s5p64x0_pdma_resource[] = { > [0] = { > - .start = S5P6440_PA_PDMA, > - .end = S5P6440_PA_PDMA + SZ_4K, > - .flags = IORESOURCE_MEM, > + .start = S5P64X0_PA_PDMA, > + .end = S5P64X0_PA_PDMA + SZ_4K, > + .flags = IORESOURCE_MEM, > }, > [1] = { > .start = IRQ_DMA0, > @@ -80,11 +81,48 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = { > }, > }; > > +static struct s3c_pl330_platdata s5p6450_pdma_pdata = { > + .peri = { > + [0] = DMACH_UART0_RX, > + [1] = DMACH_UART0_TX, > + [2] = DMACH_UART1_RX, > + [3] = DMACH_UART1_TX, > + [4] = DMACH_UART2_RX, > + [5] = DMACH_UART2_TX, > + [6] = DMACH_UART3_RX, > + [7] = DMACH_UART3_TX, > + [8] = DMACH_UART4_RX, > + [9] = DMACH_UART4_TX, > + [10] = DMACH_PCM0_TX, > + [11] = DMACH_PCM0_RX, > + [12] = DMACH_I2S0_TX, > + [13] = DMACH_I2S0_RX, > + [14] = DMACH_SPI0_TX, > + [15] = DMACH_SPI0_RX, > + [16] = DMACH_PCM1_TX, > + [17] = DMACH_PCM1_RX, > + [18] = DMACH_PCM2_TX, > + [19] = DMACH_PCM2_RX, > + [20] = DMACH_SPI1_TX, > + [21] = DMACH_SPI1_RX, > + [22] = DMACH_USI_TX, > + [23] = DMACH_USI_RX, > + [24] = DMACH_MAX, > + [25] = DMACH_I2S1_TX, > + [26] = DMACH_I2S1_RX, > + [27] = DMACH_I2S2_TX, > + [28] = DMACH_I2S2_RX, > + [29] = DMACH_PWM, > + [30] = DMACH_UART5_RX, > + [31] = DMACH_UART5_TX, > + }, > +}; > + > static struct platform_device s5p6440_device_pdma = { > .name = "s3c-pl330", > .id = 1, While at it, please make id 0 as well. > - .num_resources = ARRAY_SIZE(s5p6440_pdma_resource), > - .resource = s5p6440_pdma_resource, > + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), > + .resource = s5p64x0_pdma_resource, > .dev = { > .dma_mask = &dma_dmamask, > .coherent_dma_mask = DMA_BIT_MASK(32), > @@ -92,14 +130,27 @@ static struct platform_device s5p6440_device_pdma = { > }, > }; > > -static struct platform_device *s5p6440_dmacs[] __initdata = { > +static struct platform_device s5p6450_device_pdma = { > + .name = "s3c-pl330", > + .id = 0, > + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), > + .resource = s5p64x0_pdma_resource, > + .dev = { > + .dma_mask = &dma_dmamask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + .platform_data = &s5p6450_pdma_pdata, > + }, > +}; > + > +static struct platform_device *s5p64x0_dmacs[] __initdata = { > &s5p6440_device_pdma, > + /* &s5p6450_device_pdma will be added */ > }; Let us simply call the DMAC as s5p64x0_device_pdma and use some CPU detection method in s5p64x0_dma_init to assign either of s5p6440_pdma_pdata and s5p6450_pdma_pdata to the platform_data ........ > + DMACH_MTOM_0, > + DMACH_MTOM_1, > + DMACH_MTOM_2, > + DMACH_MTOM_3, > + DMACH_MTOM_4, > + DMACH_MTOM_5, > + DMACH_MTOM_6, > + DMACH_MTOM_7, oops ... Mainline s3c dma api doesn't yet support Mem->Mem transfers. You need to drop it. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 @ 2010-09-02 1:08 ` Jassi Brar 0 siblings, 0 replies; 52+ messages in thread From: Jassi Brar @ 2010-09-02 1:08 UTC (permalink / raw) To: linux-arm-kernel On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch moves DMA support files in the mach-s5p64x0 > for S5P6440 and S5P6450 SoCs. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > Cc: Jassi Brar <jassi.brar@samsung.com> > --- > ?arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c ? ? ?| ? 75 ++++++++++++++++--- > ?.../include/mach/dma.h ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?0 > ?arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | ? 28 +++++++ > ?3 files changed, 91 insertions(+), 12 deletions(-) > ?rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c (56%) > ?rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/dma.h (100%) > > diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c > similarity index 56% > rename from arch/arm/mach-s5p6440/dma.c > rename to arch/arm/mach-s5p64x0/dma.c > index 07606ad..bc84678 100644 > --- a/arch/arm/mach-s5p6440/dma.c > +++ b/arch/arm/mach-s5p64x0/dma.c > @@ -1,4 +1,5 @@ > -/* > +/* linux/arch/arm/mach-s5p64x0/dma.c > + * > ?* Copyright (C) 2010 Samsung Electronics Co. Ltd. > ?* ? ? Jaswinder Singh <jassi.brar@samsung.com> > ?* > @@ -15,7 +16,7 @@ > ?* You should have received a copy of the GNU General Public License > ?* along with this program; if not, write to the Free Software > ?* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > - */ > +*/ > > ?#include <linux/platform_device.h> > ?#include <linux/dma-mapping.h> > @@ -30,11 +31,11 @@ > > ?static u64 dma_dmamask = DMA_BIT_MASK(32); > > -static struct resource s5p6440_pdma_resource[] = { > +static struct resource s5p64x0_pdma_resource[] = { > ? ? ? ?[0] = { > - ? ? ? ? ? ? ? .start ?= S5P6440_PA_PDMA, > - ? ? ? ? ? ? ? .end ? ?= S5P6440_PA_PDMA + SZ_4K, > - ? ? ? ? ? ? ? .flags = IORESOURCE_MEM, > + ? ? ? ? ? ? ? .start ?= S5P64X0_PA_PDMA, > + ? ? ? ? ? ? ? .end ? ?= S5P64X0_PA_PDMA + SZ_4K, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM, > ? ? ? ?}, > ? ? ? ?[1] = { > ? ? ? ? ? ? ? ?.start ?= IRQ_DMA0, > @@ -80,11 +81,48 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = { > ? ? ? ?}, > ?}; > > +static struct s3c_pl330_platdata s5p6450_pdma_pdata = { > + ? ? ? .peri = { > + ? ? ? ? ? ? ? [0] = DMACH_UART0_RX, > + ? ? ? ? ? ? ? [1] = DMACH_UART0_TX, > + ? ? ? ? ? ? ? [2] = DMACH_UART1_RX, > + ? ? ? ? ? ? ? [3] = DMACH_UART1_TX, > + ? ? ? ? ? ? ? [4] = DMACH_UART2_RX, > + ? ? ? ? ? ? ? [5] = DMACH_UART2_TX, > + ? ? ? ? ? ? ? [6] = DMACH_UART3_RX, > + ? ? ? ? ? ? ? [7] = DMACH_UART3_TX, > + ? ? ? ? ? ? ? [8] = DMACH_UART4_RX, > + ? ? ? ? ? ? ? [9] = DMACH_UART4_TX, > + ? ? ? ? ? ? ? [10] = DMACH_PCM0_TX, > + ? ? ? ? ? ? ? [11] = DMACH_PCM0_RX, > + ? ? ? ? ? ? ? [12] = DMACH_I2S0_TX, > + ? ? ? ? ? ? ? [13] = DMACH_I2S0_RX, > + ? ? ? ? ? ? ? [14] = DMACH_SPI0_TX, > + ? ? ? ? ? ? ? [15] = DMACH_SPI0_RX, > + ? ? ? ? ? ? ? [16] = DMACH_PCM1_TX, > + ? ? ? ? ? ? ? [17] = DMACH_PCM1_RX, > + ? ? ? ? ? ? ? [18] = DMACH_PCM2_TX, > + ? ? ? ? ? ? ? [19] = DMACH_PCM2_RX, > + ? ? ? ? ? ? ? [20] = DMACH_SPI1_TX, > + ? ? ? ? ? ? ? [21] = DMACH_SPI1_RX, > + ? ? ? ? ? ? ? [22] = DMACH_USI_TX, > + ? ? ? ? ? ? ? [23] = DMACH_USI_RX, > + ? ? ? ? ? ? ? [24] = DMACH_MAX, > + ? ? ? ? ? ? ? [25] = DMACH_I2S1_TX, > + ? ? ? ? ? ? ? [26] = DMACH_I2S1_RX, > + ? ? ? ? ? ? ? [27] = DMACH_I2S2_TX, > + ? ? ? ? ? ? ? [28] = DMACH_I2S2_RX, > + ? ? ? ? ? ? ? [29] = DMACH_PWM, > + ? ? ? ? ? ? ? [30] = DMACH_UART5_RX, > + ? ? ? ? ? ? ? [31] = DMACH_UART5_TX, > + ? ? ? }, > +}; > + > ?static struct platform_device s5p6440_device_pdma = { > ? ? ? ?.name ? ? ? ? ? = "s3c-pl330", > ? ? ? ?.id ? ? ? ? ? ? = 1, While at it, please make id 0 as well. > - ? ? ? .num_resources ?= ARRAY_SIZE(s5p6440_pdma_resource), > - ? ? ? .resource ? ? ? = s5p6440_pdma_resource, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_pdma_resource), > + ? ? ? .resource ? ? ? = s5p64x0_pdma_resource, > ? ? ? ?.dev ? ? ? ? ? ?= { > ? ? ? ? ? ? ? ?.dma_mask = &dma_dmamask, > ? ? ? ? ? ? ? ?.coherent_dma_mask = DMA_BIT_MASK(32), > @@ -92,14 +130,27 @@ static struct platform_device s5p6440_device_pdma = { > ? ? ? ?}, > ?}; > > -static struct platform_device *s5p6440_dmacs[] __initdata = { > +static struct platform_device s5p6450_device_pdma = { > + ? ? ? .name ? ? ? ? ? = "s3c-pl330", > + ? ? ? .id ? ? ? ? ? ? = 0, > + ? ? ? .num_resources ?= ARRAY_SIZE(s5p64x0_pdma_resource), > + ? ? ? .resource ? ? ? = s5p64x0_pdma_resource, > + ? ? ? .dev ? ? ? ? ? ?= { > + ? ? ? ? ? ? ? .dma_mask = &dma_dmamask, > + ? ? ? ? ? ? ? .coherent_dma_mask = DMA_BIT_MASK(32), > + ? ? ? ? ? ? ? .platform_data = &s5p6450_pdma_pdata, > + ? ? ? }, > +}; > + > +static struct platform_device *s5p64x0_dmacs[] __initdata = { > ? ? ? ?&s5p6440_device_pdma, > + ? ? ? /* &s5p6450_device_pdma will be added */ > ?}; Let us simply call the DMAC as s5p64x0_device_pdma and use some CPU detection method in s5p64x0_dma_init to assign either of s5p6440_pdma_pdata and s5p6450_pdma_pdata to the platform_data ........ > + ? ? ? DMACH_MTOM_0, > + ? ? ? DMACH_MTOM_1, > + ? ? ? DMACH_MTOM_2, > + ? ? ? DMACH_MTOM_3, > + ? ? ? DMACH_MTOM_4, > + ? ? ? DMACH_MTOM_5, > + ? ? ? DMACH_MTOM_6, > + ? ? ? DMACH_MTOM_7, oops ... Mainline s3c dma api doesn't yet support Mem->Mem transfers. You need to drop it. ^ permalink raw reply [flat|nested] 52+ messages in thread
* RE: [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 2010-09-02 1:08 ` Jassi Brar @ 2010-09-02 7:32 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 7:32 UTC (permalink / raw) To: 'Jassi Brar' Cc: linux-arm-kernel, linux-samsung-soc, 'Jassi Brar', ben-linux Jassi Brar wrote: > > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch moves DMA support files in the mach-s5p64x0 > > for S5P6440 and S5P6450 SoCs. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > Cc: Jassi Brar <jassi.brar@samsung.com> > > --- > > arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c | 75 > ++++++++++++++++--- > > .../include/mach/dma.h | 0 > > arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | 28 +++++++ > > 3 files changed, 91 insertions(+), 12 deletions(-) > > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c (56%) > > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/dma.h (100%) > > (snip) > > + > > static struct platform_device s5p6440_device_pdma = { > > .name = "s3c-pl330", > > .id = 1, > > While at it, please make id 0 as well. > Ok..will fix it. > > > - .num_resources = ARRAY_SIZE(s5p6440_pdma_resource), > > - .resource = s5p6440_pdma_resource, > > + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), > > + .resource = s5p64x0_pdma_resource, > > .dev = { > > .dma_mask = &dma_dmamask, > > .coherent_dma_mask = DMA_BIT_MASK(32), > > @@ -92,14 +130,27 @@ static struct platform_device s5p6440_device_pdma = { > > }, > > }; > > > > -static struct platform_device *s5p6440_dmacs[] __initdata = { > > +static struct platform_device s5p6450_device_pdma = { > > + .name = "s3c-pl330", > > + .id = 0, > > + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), > > + .resource = s5p64x0_pdma_resource, > > + .dev = { > > + .dma_mask = &dma_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6450_pdma_pdata, > > + }, > > +}; > > + > > +static struct platform_device *s5p64x0_dmacs[] __initdata = { > > &s5p6440_device_pdma, > > + /* &s5p6450_device_pdma will be added */ > > }; > Let us simply call the DMAC as s5p64x0_device_pdma and use some > CPU detection method in s5p64x0_dma_init to assign either of > s5p6440_pdma_pdata and s5p6450_pdma_pdata to the platform_data > Ok. > ........ > > > + DMACH_MTOM_0, > > + DMACH_MTOM_1, > > + DMACH_MTOM_2, > > + DMACH_MTOM_3, > > + DMACH_MTOM_4, > > + DMACH_MTOM_5, > > + DMACH_MTOM_6, > > + DMACH_MTOM_7, > > oops ... Mainline s3c dma api doesn't yet support Mem->Mem transfers. > You need to drop it. Oh, you're right. it's my mistake. Will fix it. :-) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 @ 2010-09-02 7:32 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 7:32 UTC (permalink / raw) To: linux-arm-kernel Jassi Brar wrote: > > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch moves DMA support files in the mach-s5p64x0 > > for S5P6440 and S5P6450 SoCs. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > Cc: Jassi Brar <jassi.brar@samsung.com> > > --- > > arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c | 75 > ++++++++++++++++--- > > .../include/mach/dma.h | 0 > > arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | 28 +++++++ > > 3 files changed, 91 insertions(+), 12 deletions(-) > > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/dma.c (56%) > > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/dma.h (100%) > > (snip) > > + > > static struct platform_device s5p6440_device_pdma = { > > .name = "s3c-pl330", > > .id = 1, > > While at it, please make id 0 as well. > Ok..will fix it. > > > - .num_resources = ARRAY_SIZE(s5p6440_pdma_resource), > > - .resource = s5p6440_pdma_resource, > > + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), > > + .resource = s5p64x0_pdma_resource, > > .dev = { > > .dma_mask = &dma_dmamask, > > .coherent_dma_mask = DMA_BIT_MASK(32), > > @@ -92,14 +130,27 @@ static struct platform_device s5p6440_device_pdma = { > > }, > > }; > > > > -static struct platform_device *s5p6440_dmacs[] __initdata = { > > +static struct platform_device s5p6450_device_pdma = { > > + .name = "s3c-pl330", > > + .id = 0, > > + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), > > + .resource = s5p64x0_pdma_resource, > > + .dev = { > > + .dma_mask = &dma_dmamask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &s5p6450_pdma_pdata, > > + }, > > +}; > > + > > +static struct platform_device *s5p64x0_dmacs[] __initdata = { > > &s5p6440_device_pdma, > > + /* &s5p6450_device_pdma will be added */ > > }; > Let us simply call the DMAC as s5p64x0_device_pdma and use some > CPU detection method in s5p64x0_dma_init to assign either of > s5p6440_pdma_pdata and s5p6450_pdma_pdata to the platform_data > Ok. > ........ > > > + DMACH_MTOM_0, > > + DMACH_MTOM_1, > > + DMACH_MTOM_2, > > + DMACH_MTOM_3, > > + DMACH_MTOM_4, > > + DMACH_MTOM_5, > > + DMACH_MTOM_6, > > + DMACH_MTOM_7, > > oops ... Mainline s3c dma api doesn't yet support Mem->Mem transfers. > You need to drop it. Oh, you're right. it's my mistake. Will fix it. :-) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 09/13] ARM: S5P64X0: Add S5P6450 I2C support 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And moves S5P6440 I2C support files into the mach-s5p64x0 together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p64x0/include/mach/i2c.h | 17 ++++++++++++++ .../{mach-s5p6440 => mach-s5p64x0}/setup-i2c0.c | 24 +++++++++++++++----- .../{mach-s5p6440 => mach-s5p64x0}/setup-i2c1.c | 20 +++++++++++++--- 3 files changed, 51 insertions(+), 10 deletions(-) create mode 100644 arch/arm/mach-s5p64x0/include/mach/i2c.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/setup-i2c0.c (52%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/setup-i2c1.c (55%) diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h new file mode 100644 index 0000000..887d252 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 I2C configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev); + +extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c similarity index 52% rename from arch/arm/mach-s5p6440/setup-i2c0.c rename to arch/arm/mach-s5p64x0/setup-i2c0.c index 2c99d14..dc4cc65 100644 --- a/arch/arm/mach-s5p6440/setup-i2c0.c +++ b/arch/arm/mach-s5p64x0/setup-i2c0.c @@ -1,11 +1,11 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c0.c +/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C0 GPIO configuration. * - * Based on plat-s3c64xx/setup-i2c0.c + * Based on plat-s3c64x0/setup-i2c0.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,17 +14,29 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c0_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP); +} + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c similarity index 55% rename from arch/arm/mach-s5p6440/setup-i2c1.c rename to arch/arm/mach-s5p64x0/setup-i2c1.c index 9a1537f..2edd791 100644 --- a/arch/arm/mach-s5p6440/setup-i2c1.c +++ b/arch/arm/mach-s5p64x0/setup-i2c1.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c1.c +/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C1 GPIO configuration. * @@ -21,10 +21,22 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c1_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP); +} + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) { } -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 09/13] ARM: S5P64X0: Add S5P6450 I2C support @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And moves S5P6440 I2C support files into the mach-s5p64x0 together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p64x0/include/mach/i2c.h | 17 ++++++++++++++ .../{mach-s5p6440 => mach-s5p64x0}/setup-i2c0.c | 24 +++++++++++++++----- .../{mach-s5p6440 => mach-s5p64x0}/setup-i2c1.c | 20 +++++++++++++--- 3 files changed, 51 insertions(+), 10 deletions(-) create mode 100644 arch/arm/mach-s5p64x0/include/mach/i2c.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/setup-i2c0.c (52%) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/setup-i2c1.c (55%) diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h new file mode 100644 index 0000000..887d252 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 I2C configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev); + +extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c similarity index 52% rename from arch/arm/mach-s5p6440/setup-i2c0.c rename to arch/arm/mach-s5p64x0/setup-i2c0.c index 2c99d14..dc4cc65 100644 --- a/arch/arm/mach-s5p6440/setup-i2c0.c +++ b/arch/arm/mach-s5p64x0/setup-i2c0.c @@ -1,11 +1,11 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c0.c +/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C0 GPIO configuration. * - * Based on plat-s3c64xx/setup-i2c0.c + * Based on plat-s3c64x0/setup-i2c0.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,17 +14,29 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c0_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP); +} + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c similarity index 55% rename from arch/arm/mach-s5p6440/setup-i2c1.c rename to arch/arm/mach-s5p64x0/setup-i2c1.c index 9a1537f..2edd791 100644 --- a/arch/arm/mach-s5p6440/setup-i2c1.c +++ b/arch/arm/mach-s5p64x0/setup-i2c1.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c1.c +/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C1 GPIO configuration. * @@ -21,10 +21,22 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c1_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP); +} + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) { } -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 10/13] ARM: S5P64X0: Move GPIO support files for merge S5P64X0 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch moves S5P6440 GPIO support files from mach-s5p6440 into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS. NOTE: Not supported S5P6450 GPIO yet. Will be supported soon. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/gpio.c | 344 -------------------- arch/arm/mach-s5p6440/include/mach/gpio.h | 80 ----- arch/arm/mach-s5p64x0/include/mach/gpio.h | 139 ++++++++ .../include/mach/regs-gpio.h | 28 +- 4 files changed, 157 insertions(+), 434 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/gpio.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/gpio.h create mode 100644 arch/arm/mach-s5p64x0/include/mach/gpio.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/regs-gpio.h (79%) diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c deleted file mode 100644 index 8bf6e0c..0000000 --- a/arch/arm/mach-s5p6440/gpio.c +++ /dev/null @@ -1,344 +0,0 @@ -/* arch/arm/mach-s5p6440/gpio.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -/* GPIO bank summary: -* -* Bank GPIOs Style SlpCon ExtInt Group -* A 6 4Bit Yes 1 -* B 7 4Bit Yes 1 -* C 8 4Bit Yes 2 -* F 2 2Bit Yes 4 [1] -* G 7 4Bit Yes 5 -* H 10 4Bit[2] Yes 6 -* I 16 2Bit Yes None -* J 12 2Bit Yes None -* N 16 2Bit No IRQ_EINT -* P 8 2Bit Yes 8 -* R 15 4Bit[2] Yes 8 -* -* [1] BANKF pins 14,15 do not form part of the external interrupt sources -* [2] BANK has two control registers, GPxCON0 and GPxCON1 -*/ - -static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long flags; - - switch (offset) { - case 6: - offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned long flags; - unsigned con_offset = offset; - - switch (con_offset) { - case 6: - con_offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - con_offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift; - unsigned long flags; - u32 con; - - switch (off) { - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - shift = (off & 7) * 4; - reg -= 4; - break; - case 6: - shift = ((off + 1) & 7) * 4; - reg -= 4; - default: - shift = ((off + 1) & 7) * 4; - break; - } - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - s3c_gpio_lock(chip, flags); - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - s3c_gpio_unlock(chip, flags); - - return 0; -} - -static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { - { - .cfg_eint = 0, - }, { - .cfg_eint = 7, - }, { - .cfg_eint = 3, - .set_config = s5p6440_gpio_setcfg_4bit_rbank, - }, { - .cfg_eint = 0, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { - { - .base = S5P6440_GPA_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPA(0), - .ngpio = S5P6440_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P6440_GPB_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPB(0), - .ngpio = S5P6440_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P6440_GPC_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPC(0), - .ngpio = S5P6440_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P6440_GPG_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPG(0), - .ngpio = S5P6440_GPIO_G_NR, - .label = "GPG", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { - { - .base = S5P6440_GPH_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPH(0), - .ngpio = S5P6440_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip gpio_rbank_4bit2[] = { - { - .base = S5P6440_GPR_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[2], - .chip = { - .base = S5P6440_GPR(0), - .ngpio = S5P6440_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { - { - .base = S5P6440_GPF_BASE, - .config = &s5p6440_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPF(0), - .ngpio = S5P6440_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P6440_GPI_BASE, - .config = &s5p6440_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPI(0), - .ngpio = S5P6440_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P6440_GPJ_BASE, - .config = &s5p6440_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPJ(0), - .ngpio = S5P6440_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P6440_GPN_BASE, - .config = &s5p6440_gpio_cfgs[4], - .chip = { - .base = S5P6440_GPN(0), - .ngpio = S5P6440_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P6440_GPP_BASE, - .config = &s5p6440_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPP(0), - .ngpio = S5P6440_GPIO_P_NR, - .label = "GPP", - }, - }, -}; - -void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chipcfg++) { - if (!chipcfg->set_config) - chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; - if (!chipcfg->get_config) - chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; - if (!chipcfg->set_pull) - chipcfg->set_pull = s3c_gpio_setpull_updown; - if (!chipcfg->get_pull) - chipcfg->get_pull = s3c_gpio_getpull_updown; - } -} - -static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input; - chip->chip.direction_output = - s5p6440_gpiolib_rbank_4bit2_output; - s3c_gpiolib_add(chip); - } -} - -static int __init s5p6440_gpiolib_init(void) -{ - struct s3c_gpio_chip *chips = s5p6440_gpio_2bit; - int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit); - - s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs, - ARRAY_SIZE(s5p6440_gpio_cfgs)); - - for (; nr_chips > 0; nr_chips--, chips++) - s3c_gpiolib_add(chips); - - samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, - ARRAY_SIZE(s5p6440_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, - ARRAY_SIZE(s5p6440_gpio_4bit2)); - - s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2, - ARRAY_SIZE(gpio_rbank_4bit2)); - - return 0; -} -arch_initcall(s5p6440_gpiolib_init); diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h deleted file mode 100644 index 2178383..0000000 --- a/arch/arm/mach-s5p6440/include/mach/gpio.h +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6440_GPIO_A_NR (6) -#define S5P6440_GPIO_B_NR (7) -#define S5P6440_GPIO_C_NR (8) -#define S5P6440_GPIO_F_NR (2) -#define S5P6440_GPIO_G_NR (7) -#define S5P6440_GPIO_H_NR (10) -#define S5P6440_GPIO_I_NR (16) -#define S5P6440_GPIO_J_NR (12) -#define S5P6440_GPIO_N_NR (16) -#define S5P6440_GPIO_P_NR (8) -#define S5P6440_GPIO_R_NR (15) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ -#define S5P6440_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6440_GPIO_A_START = 0, - S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A), - S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B), - S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C), - S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F), - S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G), - S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H), - S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I), - S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J), - S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N), - S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P), -}; - -/* S5P6440 GPIO number definitions. */ -#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) -#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) -#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) -#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) -#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) -#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) -#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) -#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) -#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) -#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) -#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) - -/* the end of the S5P6440 specific gpios */ -#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) -#define S3C_GPIO_END S5P6440_GPIO_END - -/* define the number of gpios we need to the one after the GPR() range */ -#define ARCH_NR_GPIOS (S5P6440_GPR(S5P6440_GPIO_R_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h new file mode 100644 index 0000000..5486c8f --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h @@ -0,0 +1,139 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ + +#define S5P6440_GPIO_A_NR (6) +#define S5P6440_GPIO_B_NR (7) +#define S5P6440_GPIO_C_NR (8) +#define S5P6440_GPIO_F_NR (2) +#define S5P6440_GPIO_G_NR (7) +#define S5P6440_GPIO_H_NR (10) +#define S5P6440_GPIO_I_NR (16) +#define S5P6440_GPIO_J_NR (12) +#define S5P6440_GPIO_N_NR (16) +#define S5P6440_GPIO_P_NR (8) +#define S5P6440_GPIO_R_NR (15) + +#define S5P6450_GPIO_A_NR (6) +#define S5P6450_GPIO_B_NR (7) +#define S5P6450_GPIO_C_NR (8) +#define S5P6450_GPIO_D_NR (8) +#define S5P6450_GPIO_F_NR (2) +#define S5P6450_GPIO_G_NR (14) +#define S5P6450_GPIO_H_NR (10) +#define S5P6450_GPIO_I_NR (16) +#define S5P6450_GPIO_J_NR (12) +#define S5P6450_GPIO_K_NR (5) +#define S5P6450_GPIO_N_NR (16) +#define S5P6450_GPIO_P_NR (11) +#define S5P6450_GPIO_Q_NR (14) +#define S5P6450_GPIO_R_NR (15) +#define S5P6450_GPIO_S_NR (8) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S5P64X0_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p6440_gpio_number { + S5P6440_GPIO_A_START = 0, + S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A), + S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B), + S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C), + S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F), + S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G), + S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H), + S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I), + S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J), + S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N), + S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P), +}; + +enum s5p6450_gpio_number { + S5P6450_GPIO_A_START = 0, + S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A), + S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B), + S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C), + S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D), + S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F), + S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G), + S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H), + S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I), + S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J), + S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K), + S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N), + S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P), + S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q), + S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R), +}; + +/* GPIO number definitions */ + +#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) +#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) +#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) +#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) +#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) +#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) +#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) +#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) +#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) +#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) +#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) + +#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr)) +#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr)) +#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr)) +#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr)) +#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr)) +#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr)) +#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr)) +#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr)) +#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr)) +#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr)) +#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr)) +#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr)) +#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr)) +#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr)) +#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr)) + +/* the end of the S5P64X0 specific gpios */ + +#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) +#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1) + +#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \ + S5P6440_GPIO_END : S5P6450_GPIO_END) + +#define S3C_GPIO_END S5P64X0_GPIO_END + +/* define the number of gpios we need to the one after the last GPIO range */ + +#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h similarity index 79% rename from arch/arm/mach-s5p6440/include/mach/regs-gpio.h rename to arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 82ff753..85f448e 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -1,21 +1,24 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - GPIO register definitions + * S5P64X0 - GPIO register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - */ +*/ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H __FILE__ #include <mach/map.h> +/* Will be implemented S5P6442 GPIOlib */ + /* Base addresses for each of the banks */ + #define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000) #define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020) #define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040) @@ -27,6 +30,7 @@ #define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830) #define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160) #define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290) + #define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900) #define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910) #define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914) @@ -34,19 +38,23 @@ #define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924) /* for LCD */ + #define S5P6440_SPCON_LCD_SEL_RGB (1 << 0) #define S5P6440_SPCON_LCD_SEL_MASK (3 << 0) -/* These set of macros are not really useful for the - * GPF/GPI/GPJ/GPN/GPP, - * useful for others set of GPIO's (4 bit) +/* + * These set of macros are not really useful for the + * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit) */ + #define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4)) #define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4)) #define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) -/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) - * */ +/* + * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) + */ + #define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) #define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2)) #define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 10/13] ARM: S5P64X0: Move GPIO support files for merge S5P64X0 @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch moves S5P6440 GPIO support files from mach-s5p6440 into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS. NOTE: Not supported S5P6450 GPIO yet. Will be supported soon. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p6440/gpio.c | 344 -------------------- arch/arm/mach-s5p6440/include/mach/gpio.h | 80 ----- arch/arm/mach-s5p64x0/include/mach/gpio.h | 139 ++++++++ .../include/mach/regs-gpio.h | 28 +- 4 files changed, 157 insertions(+), 434 deletions(-) delete mode 100644 arch/arm/mach-s5p6440/gpio.c delete mode 100644 arch/arm/mach-s5p6440/include/mach/gpio.h create mode 100644 arch/arm/mach-s5p64x0/include/mach/gpio.h rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/include/mach/regs-gpio.h (79%) diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c deleted file mode 100644 index 8bf6e0c..0000000 --- a/arch/arm/mach-s5p6440/gpio.c +++ /dev/null @@ -1,344 +0,0 @@ -/* arch/arm/mach-s5p6440/gpio.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -/* GPIO bank summary: -* -* Bank GPIOs Style SlpCon ExtInt Group -* A 6 4Bit Yes 1 -* B 7 4Bit Yes 1 -* C 8 4Bit Yes 2 -* F 2 2Bit Yes 4 [1] -* G 7 4Bit Yes 5 -* H 10 4Bit[2] Yes 6 -* I 16 2Bit Yes None -* J 12 2Bit Yes None -* N 16 2Bit No IRQ_EINT -* P 8 2Bit Yes 8 -* R 15 4Bit[2] Yes 8 -* -* [1] BANKF pins 14,15 do not form part of the external interrupt sources -* [2] BANK has two control registers, GPxCON0 and GPxCON1 -*/ - -static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long flags; - - switch (offset) { - case 6: - offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned long flags; - unsigned con_offset = offset; - - switch (con_offset) { - case 6: - con_offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - con_offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift; - unsigned long flags; - u32 con; - - switch (off) { - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - shift = (off & 7) * 4; - reg -= 4; - break; - case 6: - shift = ((off + 1) & 7) * 4; - reg -= 4; - default: - shift = ((off + 1) & 7) * 4; - break; - } - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - s3c_gpio_lock(chip, flags); - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - s3c_gpio_unlock(chip, flags); - - return 0; -} - -static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { - { - .cfg_eint = 0, - }, { - .cfg_eint = 7, - }, { - .cfg_eint = 3, - .set_config = s5p6440_gpio_setcfg_4bit_rbank, - }, { - .cfg_eint = 0, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { - { - .base = S5P6440_GPA_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPA(0), - .ngpio = S5P6440_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P6440_GPB_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPB(0), - .ngpio = S5P6440_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P6440_GPC_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPC(0), - .ngpio = S5P6440_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P6440_GPG_BASE, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPG(0), - .ngpio = S5P6440_GPIO_G_NR, - .label = "GPG", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { - { - .base = S5P6440_GPH_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPH(0), - .ngpio = S5P6440_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip gpio_rbank_4bit2[] = { - { - .base = S5P6440_GPR_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[2], - .chip = { - .base = S5P6440_GPR(0), - .ngpio = S5P6440_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { - { - .base = S5P6440_GPF_BASE, - .config = &s5p6440_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPF(0), - .ngpio = S5P6440_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P6440_GPI_BASE, - .config = &s5p6440_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPI(0), - .ngpio = S5P6440_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P6440_GPJ_BASE, - .config = &s5p6440_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPJ(0), - .ngpio = S5P6440_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P6440_GPN_BASE, - .config = &s5p6440_gpio_cfgs[4], - .chip = { - .base = S5P6440_GPN(0), - .ngpio = S5P6440_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P6440_GPP_BASE, - .config = &s5p6440_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPP(0), - .ngpio = S5P6440_GPIO_P_NR, - .label = "GPP", - }, - }, -}; - -void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chipcfg++) { - if (!chipcfg->set_config) - chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; - if (!chipcfg->get_config) - chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; - if (!chipcfg->set_pull) - chipcfg->set_pull = s3c_gpio_setpull_updown; - if (!chipcfg->get_pull) - chipcfg->get_pull = s3c_gpio_getpull_updown; - } -} - -static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input; - chip->chip.direction_output = - s5p6440_gpiolib_rbank_4bit2_output; - s3c_gpiolib_add(chip); - } -} - -static int __init s5p6440_gpiolib_init(void) -{ - struct s3c_gpio_chip *chips = s5p6440_gpio_2bit; - int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit); - - s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs, - ARRAY_SIZE(s5p6440_gpio_cfgs)); - - for (; nr_chips > 0; nr_chips--, chips++) - s3c_gpiolib_add(chips); - - samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, - ARRAY_SIZE(s5p6440_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, - ARRAY_SIZE(s5p6440_gpio_4bit2)); - - s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2, - ARRAY_SIZE(gpio_rbank_4bit2)); - - return 0; -} -arch_initcall(s5p6440_gpiolib_init); diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h deleted file mode 100644 index 2178383..0000000 --- a/arch/arm/mach-s5p6440/include/mach/gpio.h +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6440_GPIO_A_NR (6) -#define S5P6440_GPIO_B_NR (7) -#define S5P6440_GPIO_C_NR (8) -#define S5P6440_GPIO_F_NR (2) -#define S5P6440_GPIO_G_NR (7) -#define S5P6440_GPIO_H_NR (10) -#define S5P6440_GPIO_I_NR (16) -#define S5P6440_GPIO_J_NR (12) -#define S5P6440_GPIO_N_NR (16) -#define S5P6440_GPIO_P_NR (8) -#define S5P6440_GPIO_R_NR (15) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ -#define S5P6440_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6440_GPIO_A_START = 0, - S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A), - S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B), - S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C), - S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F), - S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G), - S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H), - S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I), - S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J), - S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N), - S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P), -}; - -/* S5P6440 GPIO number definitions. */ -#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) -#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) -#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) -#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) -#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) -#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) -#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) -#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) -#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) -#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) -#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) - -/* the end of the S5P6440 specific gpios */ -#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) -#define S3C_GPIO_END S5P6440_GPIO_END - -/* define the number of gpios we need to the one after the GPR() range */ -#define ARCH_NR_GPIOS (S5P6440_GPR(S5P6440_GPIO_R_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h new file mode 100644 index 0000000..5486c8f --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h @@ -0,0 +1,139 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ + +#define S5P6440_GPIO_A_NR (6) +#define S5P6440_GPIO_B_NR (7) +#define S5P6440_GPIO_C_NR (8) +#define S5P6440_GPIO_F_NR (2) +#define S5P6440_GPIO_G_NR (7) +#define S5P6440_GPIO_H_NR (10) +#define S5P6440_GPIO_I_NR (16) +#define S5P6440_GPIO_J_NR (12) +#define S5P6440_GPIO_N_NR (16) +#define S5P6440_GPIO_P_NR (8) +#define S5P6440_GPIO_R_NR (15) + +#define S5P6450_GPIO_A_NR (6) +#define S5P6450_GPIO_B_NR (7) +#define S5P6450_GPIO_C_NR (8) +#define S5P6450_GPIO_D_NR (8) +#define S5P6450_GPIO_F_NR (2) +#define S5P6450_GPIO_G_NR (14) +#define S5P6450_GPIO_H_NR (10) +#define S5P6450_GPIO_I_NR (16) +#define S5P6450_GPIO_J_NR (12) +#define S5P6450_GPIO_K_NR (5) +#define S5P6450_GPIO_N_NR (16) +#define S5P6450_GPIO_P_NR (11) +#define S5P6450_GPIO_Q_NR (14) +#define S5P6450_GPIO_R_NR (15) +#define S5P6450_GPIO_S_NR (8) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S5P64X0_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p6440_gpio_number { + S5P6440_GPIO_A_START = 0, + S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A), + S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B), + S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C), + S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F), + S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G), + S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H), + S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I), + S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J), + S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N), + S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P), +}; + +enum s5p6450_gpio_number { + S5P6450_GPIO_A_START = 0, + S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A), + S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B), + S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C), + S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D), + S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F), + S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G), + S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H), + S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I), + S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J), + S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K), + S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N), + S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P), + S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q), + S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R), +}; + +/* GPIO number definitions */ + +#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) +#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) +#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) +#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) +#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) +#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) +#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) +#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) +#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) +#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) +#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) + +#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr)) +#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr)) +#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr)) +#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr)) +#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr)) +#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr)) +#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr)) +#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr)) +#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr)) +#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr)) +#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr)) +#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr)) +#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr)) +#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr)) +#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr)) + +/* the end of the S5P64X0 specific gpios */ + +#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) +#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1) + +#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \ + S5P6440_GPIO_END : S5P6450_GPIO_END) + +#define S3C_GPIO_END S5P64X0_GPIO_END + +/* define the number of gpios we need to the one after the last GPIO range */ + +#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h similarity index 79% rename from arch/arm/mach-s5p6440/include/mach/regs-gpio.h rename to arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 82ff753..85f448e 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -1,21 +1,24 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - GPIO register definitions + * S5P64X0 - GPIO register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - */ +*/ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H __FILE__ #include <mach/map.h> +/* Will be implemented S5P6442 GPIOlib */ + /* Base addresses for each of the banks */ + #define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000) #define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020) #define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040) @@ -27,6 +30,7 @@ #define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830) #define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160) #define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290) + #define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900) #define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910) #define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914) @@ -34,19 +38,23 @@ #define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924) /* for LCD */ + #define S5P6440_SPCON_LCD_SEL_RGB (1 << 0) #define S5P6440_SPCON_LCD_SEL_MASK (3 << 0) -/* These set of macros are not really useful for the - * GPF/GPI/GPJ/GPN/GPP, - * useful for others set of GPIO's (4 bit) +/* + * These set of macros are not really useful for the + * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit) */ + #define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4)) #define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4)) #define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) -/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) - * */ +/* + * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) + */ + #define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) #define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2)) #define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch moves smdk6440 board file from mach-s5p6440 into the new mach-s5p64x0 directory and adds smdk6450 board file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c | 87 ++++++---- arch/arm/mach-s5p64x0/mach-smdk6450.c | 182 ++++++++++++++++++++ 2 files changed, 234 insertions(+), 35 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c (66%) create mode 100644 arch/arm/mach-s5p64x0/mach-smdk6450.c diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c similarity index 66% rename from arch/arm/mach-s5p6440/mach-smdk6440.c rename to arch/arm/mach-s5p64x0/mach-smdk6440.c index 9202aaa..28de0a5 100644 --- a/arch/arm/mach-s5p6440/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c +/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,21 +21,22 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> #include <plat/regs-serial.h> - +#include <plat/gpio-cfg.h> #include <plat/s5p6440.h> #include <plat/clock.h> -#include <mach/regs-clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> @@ -58,43 +59,60 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 0, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 1, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 2, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 3, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, }; static struct platform_device *smdk6440_devices[] __initdata = { - &s5p6440_device_iis, &s3c_device_adc, &s3c_device_rtc, &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_ts, &s3c_device_wdt, + &s5p6440_device_iis, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c1_cfg_gpio, }; static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { @@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { static void __init smdk6440_map_io(void) { - s5p_init_io(NULL, 0, S5P_SYS_ID); + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); } @@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void) { s3c24xx_ts_set_platdata(&s3c_ts_platform); - /* I2C */ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); + s3c_i2c0_set_platdata(&s5p6440_i2c0_data); + s3c_i2c1_set_platdata(&s5p6440_i2c1_data); i2c_register_board_info(0, smdk6440_i2c_devs0, ARRAY_SIZE(smdk6440_i2c_devs0)); i2c_register_board_info(1, smdk6440_i2c_devs1, @@ -135,9 +152,9 @@ static void __init smdk6440_machine_init(void) MACHINE_START(SMDK6440, "SMDK6440") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, + .phys_io = S5P6440_PA_UART(0) & 0xfff00000, .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S5P_PA_SDRAM + 0x100, + .boot_params = S5P64X0_PA_SDRAM + 0x100, .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c new file mode 100644 index 0000000..8e98217 --- /dev/null +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -0,0 +1,182 @@ +/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> + +#include <plat/regs-serial.h> +#include <plat/gpio-cfg.h> +#include <plat/s5p6450.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> +#include <plat/pll.h> +#include <plat/adc.h> +#include <plat/ts.h> + +#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16 | \ + S3C2410_UFCON_RXTRIG8) + +static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [4] = { + .hwport = 4, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [5] = { + .hwport = 5, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +}; + +static struct platform_device *smdk6450_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_rtc, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_ts, + &s3c_device_wdt, + &s5p6450_device_iis0, + /* s5p6450_device_spi0 will be added */ +}; + +static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c1_cfg_gpio, +}; + +static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ +}; + +static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + +static void __init smdk6450_map_io(void) +{ + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); + s3c24xx_init_clocks(19200000); + s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); +} + +static void __init smdk6450_machine_init(void) +{ + s3c24xx_ts_set_platdata(&s3c_ts_platform); + + s3c_i2c0_set_platdata(&s5p6450_i2c0_data); + s3c_i2c1_set_platdata(&s5p6450_i2c1_data); + i2c_register_board_info(0, smdk6450_i2c_devs0, + ARRAY_SIZE(smdk6450_i2c_devs0)); + i2c_register_board_info(1, smdk6450_i2c_devs1, + ARRAY_SIZE(smdk6450_i2c_devs1)); + + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); +} + +MACHINE_START(SMDK6450, "SMDK6450") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S5P6450_PA_UART(0) & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P64X0_PA_SDRAM + 0x100, + + .init_irq = s5p6450_init_irq, + .map_io = smdk6450_map_io, + .init_machine = smdk6450_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch moves smdk6440 board file from mach-s5p6440 into the new mach-s5p64x0 directory and adds smdk6450 board file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c | 87 ++++++---- arch/arm/mach-s5p64x0/mach-smdk6450.c | 182 ++++++++++++++++++++ 2 files changed, 234 insertions(+), 35 deletions(-) rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c (66%) create mode 100644 arch/arm/mach-s5p64x0/mach-smdk6450.c diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c similarity index 66% rename from arch/arm/mach-s5p6440/mach-smdk6440.c rename to arch/arm/mach-s5p64x0/mach-smdk6440.c index 9202aaa..28de0a5 100644 --- a/arch/arm/mach-s5p6440/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c +/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,21 +21,22 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> #include <plat/regs-serial.h> - +#include <plat/gpio-cfg.h> #include <plat/s5p6440.h> #include <plat/clock.h> -#include <mach/regs-clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> @@ -58,43 +59,60 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 0, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 1, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 2, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 3, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, }; static struct platform_device *smdk6440_devices[] __initdata = { - &s5p6440_device_iis, &s3c_device_adc, &s3c_device_rtc, &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_ts, &s3c_device_wdt, + &s5p6440_device_iis, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c1_cfg_gpio, }; static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { @@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { static void __init smdk6440_map_io(void) { - s5p_init_io(NULL, 0, S5P_SYS_ID); + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); } @@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void) { s3c24xx_ts_set_platdata(&s3c_ts_platform); - /* I2C */ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); + s3c_i2c0_set_platdata(&s5p6440_i2c0_data); + s3c_i2c1_set_platdata(&s5p6440_i2c1_data); i2c_register_board_info(0, smdk6440_i2c_devs0, ARRAY_SIZE(smdk6440_i2c_devs0)); i2c_register_board_info(1, smdk6440_i2c_devs1, @@ -135,9 +152,9 @@ static void __init smdk6440_machine_init(void) MACHINE_START(SMDK6440, "SMDK6440") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, + .phys_io = S5P6440_PA_UART(0) & 0xfff00000, .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S5P_PA_SDRAM + 0x100, + .boot_params = S5P64X0_PA_SDRAM + 0x100, .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c new file mode 100644 index 0000000..8e98217 --- /dev/null +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -0,0 +1,182 @@ +/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> + +#include <plat/regs-serial.h> +#include <plat/gpio-cfg.h> +#include <plat/s5p6450.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> +#include <plat/pll.h> +#include <plat/adc.h> +#include <plat/ts.h> + +#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16 | \ + S3C2410_UFCON_RXTRIG8) + +static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [4] = { + .hwport = 4, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [5] = { + .hwport = 5, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +}; + +static struct platform_device *smdk6450_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_rtc, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_ts, + &s3c_device_wdt, + &s5p6450_device_iis0, + /* s5p6450_device_spi0 will be added */ +}; + +static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c1_cfg_gpio, +}; + +static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ +}; + +static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + +static void __init smdk6450_map_io(void) +{ + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); + s3c24xx_init_clocks(19200000); + s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); +} + +static void __init smdk6450_machine_init(void) +{ + s3c24xx_ts_set_platdata(&s3c_ts_platform); + + s3c_i2c0_set_platdata(&s5p6450_i2c0_data); + s3c_i2c1_set_platdata(&s5p6450_i2c1_data); + i2c_register_board_info(0, smdk6450_i2c_devs0, + ARRAY_SIZE(smdk6450_i2c_devs0)); + i2c_register_board_info(1, smdk6450_i2c_devs1, + ARRAY_SIZE(smdk6450_i2c_devs1)); + + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); +} + +MACHINE_START(SMDK6450, "SMDK6450") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S5P6450_PA_UART(0) & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P64X0_PA_SDRAM + 0x100, + + .init_irq = s5p6450_init_irq, + .map_io = smdk6450_map_io, + .init_machine = smdk6450_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 10:00 ` Kyungmin Park -1 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-01 10:00 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch moves smdk6440 board file from mach-s5p6440 into the new > mach-s5p64x0 directory and adds smdk6450 board file. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > .../{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c | 87 ++++++---- > arch/arm/mach-s5p64x0/mach-smdk6450.c | 182 ++++++++++++++++++++ > 2 files changed, 234 insertions(+), 35 deletions(-) > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c (66%) > create mode 100644 arch/arm/mach-s5p64x0/mach-smdk6450.c > > diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c > similarity index 66% > rename from arch/arm/mach-s5p6440/mach-smdk6440.c > rename to arch/arm/mach-s5p64x0/mach-smdk6440.c > index 9202aaa..28de0a5 100644 > --- a/arch/arm/mach-s5p6440/mach-smdk6440.c > +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c > @@ -1,7 +1,7 @@ > -/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c > +/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c > * > - * Copyright (c) 2009 Samsung Electronics Co., Ltd. > - * http://www.samsung.com/ > + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > @@ -21,21 +21,22 @@ > #include <linux/io.h> > #include <linux/module.h> > #include <linux/clk.h> > +#include <linux/gpio.h> > > #include <asm/mach/arch.h> > #include <asm/mach/map.h> > +#include <asm/irq.h> > +#include <asm/mach-types.h> > > #include <mach/hardware.h> > #include <mach/map.h> > - > -#include <asm/irq.h> > -#include <asm/mach-types.h> > +#include <mach/regs-clock.h> > +#include <mach/i2c.h> > > #include <plat/regs-serial.h> > - > +#include <plat/gpio-cfg.h> > #include <plat/s5p6440.h> > #include <plat/clock.h> > -#include <mach/regs-clock.h> > #include <plat/devs.h> > #include <plat/cpu.h> > #include <plat/iic.h> > @@ -58,43 +59,60 @@ > > static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { > [0] = { > - .hwport = 0, > - .flags = 0, > - .ucon = SMDK6440_UCON_DEFAULT, > - .ulcon = SMDK6440_ULCON_DEFAULT, > - .ufcon = SMDK6440_UFCON_DEFAULT, > + .hwport = 0, > + .flags = 0, There's no place to use this flags, it's posted for long time. but you don't listen it. I hope delete it if not used. > + .ucon = SMDK6440_UCON_DEFAULT, > + .ulcon = SMDK6440_ULCON_DEFAULT, > + .ufcon = SMDK6440_UFCON_DEFAULT, > }, > [1] = { > - .hwport = 1, > - .flags = 0, > - .ucon = SMDK6440_UCON_DEFAULT, > - .ulcon = SMDK6440_ULCON_DEFAULT, > - .ufcon = SMDK6440_UFCON_DEFAULT, > + .hwport = 1, > + .flags = 0, > + .ucon = SMDK6440_UCON_DEFAULT, > + .ulcon = SMDK6440_ULCON_DEFAULT, > + .ufcon = SMDK6440_UFCON_DEFAULT, > }, > [2] = { > - .hwport = 2, > - .flags = 0, > - .ucon = SMDK6440_UCON_DEFAULT, > - .ulcon = SMDK6440_ULCON_DEFAULT, > - .ufcon = SMDK6440_UFCON_DEFAULT, > + .hwport = 2, > + .flags = 0, > + .ucon = SMDK6440_UCON_DEFAULT, > + .ulcon = SMDK6440_ULCON_DEFAULT, > + .ufcon = SMDK6440_UFCON_DEFAULT, > }, > [3] = { > - .hwport = 3, > - .flags = 0, > - .ucon = SMDK6440_UCON_DEFAULT, > - .ulcon = SMDK6440_ULCON_DEFAULT, > - .ufcon = SMDK6440_UFCON_DEFAULT, > + .hwport = 3, > + .flags = 0, > + .ucon = SMDK6440_UCON_DEFAULT, > + .ulcon = SMDK6440_ULCON_DEFAULT, > + .ufcon = SMDK6440_UFCON_DEFAULT, > }, > }; > > static struct platform_device *smdk6440_devices[] __initdata = { > - &s5p6440_device_iis, > &s3c_device_adc, > &s3c_device_rtc, > &s3c_device_i2c0, > &s3c_device_i2c1, > &s3c_device_ts, > &s3c_device_wdt, > + &s5p6440_device_iis, > +}; > + > +static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { > + .flags = 0, > + .slave_addr = 0x10, > + .frequency = 100*1000, > + .sda_delay = 100, > + .cfg_gpio = s5p6440_i2c0_cfg_gpio, > +}; > + > +static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { > + .flags = 0, > + .bus_num = 1, > + .slave_addr = 0x10, > + .frequency = 100*1000, > + .sda_delay = 100, > + .cfg_gpio = s5p6440_i2c1_cfg_gpio, > }; > > static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { > @@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { > > static void __init smdk6440_map_io(void) > { > - s5p_init_io(NULL, 0, S5P_SYS_ID); > + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); > s3c24xx_init_clocks(12000000); > s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); > } > @@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void) > { > s3c24xx_ts_set_platdata(&s3c_ts_platform); > > - /* I2C */ > - s3c_i2c0_set_platdata(NULL); > - s3c_i2c1_set_platdata(NULL); > + s3c_i2c0_set_platdata(&s5p6440_i2c0_data); > + s3c_i2c1_set_platdata(&s5p6440_i2c1_data); > i2c_register_board_info(0, smdk6440_i2c_devs0, > ARRAY_SIZE(smdk6440_i2c_devs0)); > i2c_register_board_info(1, smdk6440_i2c_devs1, > @@ -135,9 +152,9 @@ static void __init smdk6440_machine_init(void) > > MACHINE_START(SMDK6440, "SMDK6440") > /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ > - .phys_io = S3C_PA_UART & 0xfff00000, > + .phys_io = S5P6440_PA_UART(0) & 0xfff00000, > .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, > - .boot_params = S5P_PA_SDRAM + 0x100, > + .boot_params = S5P64X0_PA_SDRAM + 0x100, > > .init_irq = s5p6440_init_irq, > .map_io = smdk6440_map_io, > diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c > new file mode 100644 > index 0000000..8e98217 > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c > @@ -0,0 +1,182 @@ > +/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c > + * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/kernel.h> > +#include <linux/types.h> > +#include <linux/interrupt.h> > +#include <linux/list.h> > +#include <linux/timer.h> > +#include <linux/delay.h> > +#include <linux/init.h> > +#include <linux/i2c.h> > +#include <linux/serial_core.h> > +#include <linux/platform_device.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/clk.h> > +#include <linux/gpio.h> > + > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > +#include <asm/irq.h> > +#include <asm/mach-types.h> > + > +#include <mach/hardware.h> > +#include <mach/map.h> > +#include <mach/regs-clock.h> > +#include <mach/i2c.h> > + > +#include <plat/regs-serial.h> > +#include <plat/gpio-cfg.h> > +#include <plat/s5p6450.h> > +#include <plat/clock.h> > +#include <plat/devs.h> > +#include <plat/cpu.h> > +#include <plat/iic.h> > +#include <plat/pll.h> > +#include <plat/adc.h> > +#include <plat/ts.h> > + > +#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ > + S3C2410_UCON_RXILEVEL | \ > + S3C2410_UCON_TXIRQMODE | \ > + S3C2410_UCON_RXIRQMODE | \ > + S3C2410_UCON_RXFIFO_TOI | \ > + S3C2443_UCON_RXERR_IRQEN) > + > +#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 > + > +#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ > + S3C2440_UFCON_TXTRIG16 | \ > + S3C2410_UFCON_RXTRIG8) > + > +static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { > + [0] = { > + .hwport = 0, > + .flags = 0, > + .ucon = SMDK6450_UCON_DEFAULT, > + .ulcon = SMDK6450_ULCON_DEFAULT, > + .ufcon = SMDK6450_UFCON_DEFAULT, > + }, > + [1] = { > + .hwport = 1, > + .flags = 0, > + .ucon = SMDK6450_UCON_DEFAULT, > + .ulcon = SMDK6450_ULCON_DEFAULT, > + .ufcon = SMDK6450_UFCON_DEFAULT, > + }, > + [2] = { > + .hwport = 2, > + .flags = 0, > + .ucon = SMDK6450_UCON_DEFAULT, > + .ulcon = SMDK6450_ULCON_DEFAULT, > + .ufcon = SMDK6450_UFCON_DEFAULT, > + }, > + [3] = { > + .hwport = 3, > + .flags = 0, > + .ucon = SMDK6450_UCON_DEFAULT, > + .ulcon = SMDK6450_ULCON_DEFAULT, > + .ufcon = SMDK6450_UFCON_DEFAULT, > + }, > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 > + [4] = { > + .hwport = 4, > + .flags = 0, > + .ucon = SMDK6450_UCON_DEFAULT, > + .ulcon = SMDK6450_ULCON_DEFAULT, > + .ufcon = SMDK6450_UFCON_DEFAULT, > + }, > +#endif > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 > + [5] = { > + .hwport = 5, > + .flags = 0, > + .ucon = SMDK6450_UCON_DEFAULT, > + .ulcon = SMDK6450_ULCON_DEFAULT, > + .ufcon = SMDK6450_UFCON_DEFAULT, > + }, > +#endif > +}; > + > +static struct platform_device *smdk6450_devices[] __initdata = { > + &s3c_device_adc, > + &s3c_device_rtc, > + &s3c_device_i2c0, > + &s3c_device_i2c1, > + &s3c_device_ts, > + &s3c_device_wdt, > + &s5p6450_device_iis0, > + /* s5p6450_device_spi0 will be added */ > +}; > + > +static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { > + .flags = 0, > + .slave_addr = 0x10, > + .frequency = 100*1000, > + .sda_delay = 100, > + .cfg_gpio = s5p6450_i2c0_cfg_gpio, > +}; > + > +static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { > + .flags = 0, > + .bus_num = 1, > + .slave_addr = 0x10, > + .frequency = 100*1000, > + .sda_delay = 100, > + .cfg_gpio = s5p6450_i2c1_cfg_gpio, > +}; > + > +static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { > + { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ > +}; > + > +static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { > + { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ > +}; > + > +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { > + .delay = 10000, > + .presc = 49, > + .oversampling_shift = 2, > +}; > + > +static void __init smdk6450_map_io(void) > +{ > + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); > + s3c24xx_init_clocks(19200000); > + s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); > +} > + > +static void __init smdk6450_machine_init(void) > +{ > + s3c24xx_ts_set_platdata(&s3c_ts_platform); > + > + s3c_i2c0_set_platdata(&s5p6450_i2c0_data); > + s3c_i2c1_set_platdata(&s5p6450_i2c1_data); > + i2c_register_board_info(0, smdk6450_i2c_devs0, > + ARRAY_SIZE(smdk6450_i2c_devs0)); > + i2c_register_board_info(1, smdk6450_i2c_devs1, > + ARRAY_SIZE(smdk6450_i2c_devs1)); > + > + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); > +} > + > +MACHINE_START(SMDK6450, "SMDK6450") I think you can make a single SMDK file. > + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ > + .phys_io = S5P6450_PA_UART(0) & 0xfff00000, > + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, > + .boot_params = S5P64X0_PA_SDRAM + 0x100, > + > + .init_irq = s5p6450_init_irq, > + .map_io = smdk6450_map_io, > + .init_machine = smdk6450_machine_init, > + .timer = &s3c24xx_timer, > +MACHINE_END > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file @ 2010-09-01 10:00 ` Kyungmin Park 0 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-01 10:00 UTC (permalink / raw) To: linux-arm-kernel On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch moves smdk6440 board file from mach-s5p6440 into the new > mach-s5p64x0 directory and adds smdk6450 board file. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > --- > ?.../{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c | ? 87 ++++++---- > ?arch/arm/mach-s5p64x0/mach-smdk6450.c ? ? ? ? ? ? ?| ?182 ++++++++++++++++++++ > ?2 files changed, 234 insertions(+), 35 deletions(-) > ?rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c (66%) > ?create mode 100644 arch/arm/mach-s5p64x0/mach-smdk6450.c > > diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c > similarity index 66% > rename from arch/arm/mach-s5p6440/mach-smdk6440.c > rename to arch/arm/mach-s5p64x0/mach-smdk6440.c > index 9202aaa..28de0a5 100644 > --- a/arch/arm/mach-s5p6440/mach-smdk6440.c > +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c > @@ -1,7 +1,7 @@ > -/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c > +/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c > ?* > - * Copyright (c) 2009 Samsung Electronics Co., Ltd. > - * ? ? ? ? ? ? http://www.samsung.com/ > + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. > + * ? ? ? ? ? ? http://www.samsung.com > ?* > ?* This program is free software; you can redistribute it and/or modify > ?* it under the terms of the GNU General Public License version 2 as > @@ -21,21 +21,22 @@ > ?#include <linux/io.h> > ?#include <linux/module.h> > ?#include <linux/clk.h> > +#include <linux/gpio.h> > > ?#include <asm/mach/arch.h> > ?#include <asm/mach/map.h> > +#include <asm/irq.h> > +#include <asm/mach-types.h> > > ?#include <mach/hardware.h> > ?#include <mach/map.h> > - > -#include <asm/irq.h> > -#include <asm/mach-types.h> > +#include <mach/regs-clock.h> > +#include <mach/i2c.h> > > ?#include <plat/regs-serial.h> > - > +#include <plat/gpio-cfg.h> > ?#include <plat/s5p6440.h> > ?#include <plat/clock.h> > -#include <mach/regs-clock.h> > ?#include <plat/devs.h> > ?#include <plat/cpu.h> > ?#include <plat/iic.h> > @@ -58,43 +59,60 @@ > > ?static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { > ? ? ? ?[0] = { > - ? ? ? ? ? ? ? .hwport ? ? ?= 0, > - ? ? ? ? ? ? ? .flags ? ? ? = 0, > - ? ? ? ? ? ? ? .ucon ? ? ? ?= SMDK6440_UCON_DEFAULT, > - ? ? ? ? ? ? ? .ulcon ? ? ? = SMDK6440_ULCON_DEFAULT, > - ? ? ? ? ? ? ? .ufcon ? ? ? = SMDK6440_UFCON_DEFAULT, > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 0, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, There's no place to use this flags, it's posted for long time. but you don't listen it. I hope delete it if not used. > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6440_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6440_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6440_UFCON_DEFAULT, > ? ? ? ?}, > ? ? ? ?[1] = { > - ? ? ? ? ? ? ? .hwport ? ? ?= 1, > - ? ? ? ? ? ? ? .flags ? ? ? = 0, > - ? ? ? ? ? ? ? .ucon ? ? ? ?= SMDK6440_UCON_DEFAULT, > - ? ? ? ? ? ? ? .ulcon ? ? ? = SMDK6440_ULCON_DEFAULT, > - ? ? ? ? ? ? ? .ufcon ? ? ? = SMDK6440_UFCON_DEFAULT, > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 1, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6440_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6440_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6440_UFCON_DEFAULT, > ? ? ? ?}, > ? ? ? ?[2] = { > - ? ? ? ? ? ? ? .hwport ? ? ?= 2, > - ? ? ? ? ? ? ? .flags ? ? ? = 0, > - ? ? ? ? ? ? ? .ucon ? ? ? ?= SMDK6440_UCON_DEFAULT, > - ? ? ? ? ? ? ? .ulcon ? ? ? = SMDK6440_ULCON_DEFAULT, > - ? ? ? ? ? ? ? .ufcon ? ? ? = SMDK6440_UFCON_DEFAULT, > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 2, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6440_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6440_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6440_UFCON_DEFAULT, > ? ? ? ?}, > ? ? ? ?[3] = { > - ? ? ? ? ? ? ? .hwport ? ? ?= 3, > - ? ? ? ? ? ? ? .flags ? ? ? = 0, > - ? ? ? ? ? ? ? .ucon ? ? ? ?= SMDK6440_UCON_DEFAULT, > - ? ? ? ? ? ? ? .ulcon ? ? ? = SMDK6440_ULCON_DEFAULT, > - ? ? ? ? ? ? ? .ufcon ? ? ? = SMDK6440_UFCON_DEFAULT, > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 3, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6440_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6440_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6440_UFCON_DEFAULT, > ? ? ? ?}, > ?}; > > ?static struct platform_device *smdk6440_devices[] __initdata = { > - ? ? ? &s5p6440_device_iis, > ? ? ? ?&s3c_device_adc, > ? ? ? ?&s3c_device_rtc, > ? ? ? ?&s3c_device_i2c0, > ? ? ? ?&s3c_device_i2c1, > ? ? ? ?&s3c_device_ts, > ? ? ? ?&s3c_device_wdt, > + ? ? ? &s5p6440_device_iis, > +}; > + > +static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { > + ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? .slave_addr ? ? = 0x10, > + ? ? ? .frequency ? ? ?= 100*1000, > + ? ? ? .sda_delay ? ? ?= 100, > + ? ? ? .cfg_gpio ? ? ? = s5p6440_i2c0_cfg_gpio, > +}; > + > +static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { > + ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? .bus_num ? ? ? ?= 1, > + ? ? ? .slave_addr ? ? = 0x10, > + ? ? ? .frequency ? ? ?= 100*1000, > + ? ? ? .sda_delay ? ? ?= 100, > + ? ? ? .cfg_gpio ? ? ? = s5p6440_i2c1_cfg_gpio, > ?}; > > ?static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { > @@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { > > ?static void __init smdk6440_map_io(void) > ?{ > - ? ? ? s5p_init_io(NULL, 0, S5P_SYS_ID); > + ? ? ? s5p_init_io(NULL, 0, S5P64X0_SYS_ID); > ? ? ? ?s3c24xx_init_clocks(12000000); > ? ? ? ?s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); > ?} > @@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void) > ?{ > ? ? ? ?s3c24xx_ts_set_platdata(&s3c_ts_platform); > > - ? ? ? /* I2C */ > - ? ? ? s3c_i2c0_set_platdata(NULL); > - ? ? ? s3c_i2c1_set_platdata(NULL); > + ? ? ? s3c_i2c0_set_platdata(&s5p6440_i2c0_data); > + ? ? ? s3c_i2c1_set_platdata(&s5p6440_i2c1_data); > ? ? ? ?i2c_register_board_info(0, smdk6440_i2c_devs0, > ? ? ? ? ? ? ? ? ? ? ? ?ARRAY_SIZE(smdk6440_i2c_devs0)); > ? ? ? ?i2c_register_board_info(1, smdk6440_i2c_devs1, > @@ -135,9 +152,9 @@ static void __init smdk6440_machine_init(void) > > ?MACHINE_START(SMDK6440, "SMDK6440") > ? ? ? ?/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ > - ? ? ? .phys_io ? ? ? ?= S3C_PA_UART & 0xfff00000, > + ? ? ? .phys_io ? ? ? ?= S5P6440_PA_UART(0) & 0xfff00000, > ? ? ? ?.io_pg_offst ? ?= (((u32)S3C_VA_UART) >> 18) & 0xfffc, > - ? ? ? .boot_params ? ?= S5P_PA_SDRAM + 0x100, > + ? ? ? .boot_params ? ?= S5P64X0_PA_SDRAM + 0x100, > > ? ? ? ?.init_irq ? ? ? = s5p6440_init_irq, > ? ? ? ?.map_io ? ? ? ? = smdk6440_map_io, > diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c > new file mode 100644 > index 0000000..8e98217 > --- /dev/null > +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c > @@ -0,0 +1,182 @@ > +/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c > + * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * ? ? ? ? ? ? http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/kernel.h> > +#include <linux/types.h> > +#include <linux/interrupt.h> > +#include <linux/list.h> > +#include <linux/timer.h> > +#include <linux/delay.h> > +#include <linux/init.h> > +#include <linux/i2c.h> > +#include <linux/serial_core.h> > +#include <linux/platform_device.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/clk.h> > +#include <linux/gpio.h> > + > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > +#include <asm/irq.h> > +#include <asm/mach-types.h> > + > +#include <mach/hardware.h> > +#include <mach/map.h> > +#include <mach/regs-clock.h> > +#include <mach/i2c.h> > + > +#include <plat/regs-serial.h> > +#include <plat/gpio-cfg.h> > +#include <plat/s5p6450.h> > +#include <plat/clock.h> > +#include <plat/devs.h> > +#include <plat/cpu.h> > +#include <plat/iic.h> > +#include <plat/pll.h> > +#include <plat/adc.h> > +#include <plat/ts.h> > + > +#define SMDK6450_UCON_DEFAULT ?(S3C2410_UCON_TXILEVEL | ? ? ? ?\ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? S3C2410_UCON_RXILEVEL | ? ? ? ? \ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? S3C2410_UCON_TXIRQMODE | ? ? ? ?\ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? S3C2410_UCON_RXIRQMODE | ? ? ? ?\ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? S3C2410_UCON_RXFIFO_TOI | ? ? ? \ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? S3C2443_UCON_RXERR_IRQEN) > + > +#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 > + > +#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | ? ? ? \ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? S3C2440_UFCON_TXTRIG16 | ? ? ? ?\ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? S3C2410_UFCON_RXTRIG8) > + > +static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { > + ? ? ? [0] = { > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 0, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6450_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6450_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6450_UFCON_DEFAULT, > + ? ? ? }, > + ? ? ? [1] = { > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 1, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6450_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6450_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6450_UFCON_DEFAULT, > + ? ? ? }, > + ? ? ? [2] = { > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 2, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6450_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6450_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6450_UFCON_DEFAULT, > + ? ? ? }, > + ? ? ? [3] = { > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 3, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6450_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6450_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6450_UFCON_DEFAULT, > + ? ? ? }, > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 > + ? ? ? [4] = { > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 4, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6450_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6450_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6450_UFCON_DEFAULT, > + ? ? ? }, > +#endif > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 > + ? ? ? [5] = { > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 5, > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6450_UCON_DEFAULT, > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6450_ULCON_DEFAULT, > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6450_UFCON_DEFAULT, > + ? ? ? }, > +#endif > +}; > + > +static struct platform_device *smdk6450_devices[] __initdata = { > + ? ? ? &s3c_device_adc, > + ? ? ? &s3c_device_rtc, > + ? ? ? &s3c_device_i2c0, > + ? ? ? &s3c_device_i2c1, > + ? ? ? &s3c_device_ts, > + ? ? ? &s3c_device_wdt, > + ? ? ? &s5p6450_device_iis0, > + ? ? ? /* s5p6450_device_spi0 will be added */ > +}; > + > +static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { > + ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? .slave_addr ? ? = 0x10, > + ? ? ? .frequency ? ? ?= 100*1000, > + ? ? ? .sda_delay ? ? ?= 100, > + ? ? ? .cfg_gpio ? ? ? = s5p6450_i2c0_cfg_gpio, > +}; > + > +static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { > + ? ? ? .flags ? ? ? ? ?= 0, > + ? ? ? .bus_num ? ? ? ?= 1, > + ? ? ? .slave_addr ? ? = 0x10, > + ? ? ? .frequency ? ? ?= 100*1000, > + ? ? ? .sda_delay ? ? ?= 100, > + ? ? ? .cfg_gpio ? ? ? = s5p6450_i2c1_cfg_gpio, > +}; > + > +static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { > + ? ? ? { I2C_BOARD_INFO("24c08", 0x50), }, ? ? /* Samsung KS24C080C EEPROM */ > +}; > + > +static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { > + ? ? ? { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ > +}; > + > +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { > + ? ? ? .delay ? ? ? ? ? ? ? ? ?= 10000, > + ? ? ? .presc ? ? ? ? ? ? ? ? ?= 49, > + ? ? ? .oversampling_shift ? ? = 2, > +}; > + > +static void __init smdk6450_map_io(void) > +{ > + ? ? ? s5p_init_io(NULL, 0, S5P64X0_SYS_ID); > + ? ? ? s3c24xx_init_clocks(19200000); > + ? ? ? s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); > +} > + > +static void __init smdk6450_machine_init(void) > +{ > + ? ? ? s3c24xx_ts_set_platdata(&s3c_ts_platform); > + > + ? ? ? s3c_i2c0_set_platdata(&s5p6450_i2c0_data); > + ? ? ? s3c_i2c1_set_platdata(&s5p6450_i2c1_data); > + ? ? ? i2c_register_board_info(0, smdk6450_i2c_devs0, > + ? ? ? ? ? ? ? ? ? ? ? ARRAY_SIZE(smdk6450_i2c_devs0)); > + ? ? ? i2c_register_board_info(1, smdk6450_i2c_devs1, > + ? ? ? ? ? ? ? ? ? ? ? ARRAY_SIZE(smdk6450_i2c_devs1)); > + > + ? ? ? platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); > +} > + > +MACHINE_START(SMDK6450, "SMDK6450") I think you can make a single SMDK file. > + ? ? ? /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ > + ? ? ? .phys_io ? ? ? ?= S5P6450_PA_UART(0) & 0xfff00000, > + ? ? ? .io_pg_offst ? ?= (((u32)S3C_VA_UART) >> 18) & 0xfffc, > + ? ? ? .boot_params ? ?= S5P64X0_PA_SDRAM + 0x100, > + > + ? ? ? .init_irq ? ? ? = s5p6450_init_irq, > + ? ? ? .map_io ? ? ? ? = smdk6450_map_io, > + ? ? ? .init_machine ? = smdk6450_machine_init, > + ? ? ? .timer ? ? ? ? ?= &s3c24xx_timer, > +MACHINE_END > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at ?http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* RE: [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file 2010-09-01 10:00 ` Kyungmin Park @ 2010-09-02 8:02 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 8:02 UTC (permalink / raw) To: 'Kyungmin Park'; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux Kyungmin Park wrote: > > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch moves smdk6440 board file from mach-s5p6440 into the new > > mach-s5p64x0 directory and adds smdk6450 board file. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > --- > > .../{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c | 87 ++++++---- > > arch/arm/mach-s5p64x0/mach-smdk6450.c | 182 > ++++++++++++++++++++ > > 2 files changed, 234 insertions(+), 35 deletions(-) > > rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c (66%) > > create mode 100644 arch/arm/mach-s5p64x0/mach-smdk6450.c > > > > diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach- > s5p64x0/mach-smdk6440.c > > similarity index 66% > > rename from arch/arm/mach-s5p6440/mach-smdk6440.c > > rename to arch/arm/mach-s5p64x0/mach-smdk6440.c > > index 9202aaa..28de0a5 100644 > > --- a/arch/arm/mach-s5p6440/mach-smdk6440.c > > +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c (snip) > > @@ -58,43 +59,60 @@ > > > > static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { > > [0] = { > > - .hwport = 0, > > - .flags = 0, > > - .ucon = SMDK6440_UCON_DEFAULT, > > - .ulcon = SMDK6440_ULCON_DEFAULT, > > - .ufcon = SMDK6440_UFCON_DEFAULT, > > + .hwport = 0, > > + .flags = 0, > There's no place to use this flags, it's posted for long time. but you > don't listen it. > I hope delete it if not used. Will be removed flags member after merging it in the mainline. > > + .ucon = SMDK6440_UCON_DEFAULT, > > + .ulcon = SMDK6440_ULCON_DEFAULT, > > + .ufcon = SMDK6440_UFCON_DEFAULT, > > }, (snip) > > + > > +MACHINE_START(SMDK6450, "SMDK6450") > > I think you can make a single SMDK file. Because the components on the board are different, SMDK6440 and SMDK6450 need each machine file. (snip) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file @ 2010-09-02 8:02 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 8:02 UTC (permalink / raw) To: linux-arm-kernel Kyungmin Park wrote: > > On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > > This patch moves smdk6440 board file from mach-s5p6440 into the new > > mach-s5p64x0 directory and adds smdk6450 board file. > > > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > > --- > > ?.../{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c | ? 87 ++++++---- > > ?arch/arm/mach-s5p64x0/mach-smdk6450.c ? ? ? ? ? ? ?| ?182 > ++++++++++++++++++++ > > ?2 files changed, 234 insertions(+), 35 deletions(-) > > ?rename arch/arm/{mach-s5p6440 => mach-s5p64x0}/mach-smdk6440.c (66%) > > ?create mode 100644 arch/arm/mach-s5p64x0/mach-smdk6450.c > > > > diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach- > s5p64x0/mach-smdk6440.c > > similarity index 66% > > rename from arch/arm/mach-s5p6440/mach-smdk6440.c > > rename to arch/arm/mach-s5p64x0/mach-smdk6440.c > > index 9202aaa..28de0a5 100644 > > --- a/arch/arm/mach-s5p6440/mach-smdk6440.c > > +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c (snip) > > @@ -58,43 +59,60 @@ > > > > ?static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { > > ? ? ? ?[0] = { > > - ? ? ? ? ? ? ? .hwport ? ? ?= 0, > > - ? ? ? ? ? ? ? .flags ? ? ? = 0, > > - ? ? ? ? ? ? ? .ucon ? ? ? ?= SMDK6440_UCON_DEFAULT, > > - ? ? ? ? ? ? ? .ulcon ? ? ? = SMDK6440_ULCON_DEFAULT, > > - ? ? ? ? ? ? ? .ufcon ? ? ? = SMDK6440_UFCON_DEFAULT, > > + ? ? ? ? ? ? ? .hwport ? ? ? ? = 0, > > + ? ? ? ? ? ? ? .flags ? ? ? ? ?= 0, > There's no place to use this flags, it's posted for long time. but you > don't listen it. > I hope delete it if not used. Will be removed flags member after merging it in the mainline. > > + ? ? ? ? ? ? ? .ucon ? ? ? ? ? = SMDK6440_UCON_DEFAULT, > > + ? ? ? ? ? ? ? .ulcon ? ? ? ? ?= SMDK6440_ULCON_DEFAULT, > > + ? ? ? ? ? ? ? .ufcon ? ? ? ? ?= SMDK6440_UFCON_DEFAULT, > > ? ? ? ?}, (snip) > > + > > +MACHINE_START(SMDK6450, "SMDK6450") > > I think you can make a single SMDK file. Because the components on the board are different, SMDK6440 and SMDK6450 need each machine file. (snip) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch adds UART serial port support for S5P6450 SoC. The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. And to fix membase which is in serial/samsung.c is from Ben Dooks. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s5p/dev-uart.c | 58 ++++++++++++++++++++++++++++++++++++++++++ drivers/serial/Kconfig | 7 +++-- drivers/serial/samsung.c | 2 +- 3 files changed, 63 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index a89331e..6a73428 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = { #endif }; +static struct resource s5p_uart4_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [0] = { + .start = S5P_PA_UART4, + .end = S5P_PA_UART4 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX4, + .end = IRQ_S5P_UART_RX4, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX4, + .end = IRQ_S5P_UART_TX4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR4, + .end = IRQ_S5P_UART_ERR4, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + +static struct resource s5p_uart5_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [0] = { + .start = S5P_PA_UART5, + .end = S5P_PA_UART5 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX5, + .end = IRQ_S5P_UART_RX5, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX5, + .end = IRQ_S5P_UART_TX5, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR5, + .end = IRQ_S5P_UART_ERR5, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { [0] = { .resources = s5p_uart0_resource, @@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { .resources = s5p_uart3_resource, .nr_resources = ARRAY_SIZE(s5p_uart3_resource), }, + [4] = { + .resources = s5p_uart4_resource, + .nr_resources = ARRAY_SIZE(s5p_uart4_resource), + }, + [5] = { + .resources = s5p_uart5_resource, + .nr_resources = ARRAY_SIZE(s5p_uart5_resource), + }, }; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 12900f7..3198c53 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 + default 6 if ARCH_S5P6450 default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help @@ -526,12 +527,12 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100) + tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) select SERIAL_SAMSUNG_UARTS_4 default y help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440 + Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 and S5PC100 SoCs config SERIAL_S5PV210 diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index b1156ba..7ac2bf5 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); port->mapbase = res->start; - port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); + port->membase = S3C_VA_UART + (res->start & 0xfffff); ret = platform_get_irq(platdev, 0); if (ret < 0) port->irq = 0; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450 @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch adds UART serial port support for S5P6450 SoC. The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. And to fix membase which is in serial/samsung.c is from Ben Dooks. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> --- arch/arm/plat-s5p/dev-uart.c | 58 ++++++++++++++++++++++++++++++++++++++++++ drivers/serial/Kconfig | 7 +++-- drivers/serial/samsung.c | 2 +- 3 files changed, 63 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index a89331e..6a73428 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = { #endif }; +static struct resource s5p_uart4_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [0] = { + .start = S5P_PA_UART4, + .end = S5P_PA_UART4 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX4, + .end = IRQ_S5P_UART_RX4, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX4, + .end = IRQ_S5P_UART_TX4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR4, + .end = IRQ_S5P_UART_ERR4, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + +static struct resource s5p_uart5_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [0] = { + .start = S5P_PA_UART5, + .end = S5P_PA_UART5 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX5, + .end = IRQ_S5P_UART_RX5, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX5, + .end = IRQ_S5P_UART_TX5, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR5, + .end = IRQ_S5P_UART_ERR5, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { [0] = { .resources = s5p_uart0_resource, @@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { .resources = s5p_uart3_resource, .nr_resources = ARRAY_SIZE(s5p_uart3_resource), }, + [4] = { + .resources = s5p_uart4_resource, + .nr_resources = ARRAY_SIZE(s5p_uart4_resource), + }, + [5] = { + .resources = s5p_uart5_resource, + .nr_resources = ARRAY_SIZE(s5p_uart5_resource), + }, }; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 12900f7..3198c53 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 + default 6 if ARCH_S5P6450 default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help @@ -526,12 +527,12 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100) + tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) select SERIAL_SAMSUNG_UARTS_4 default y help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440 + Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 and S5PC100 SoCs config SERIAL_S5PV210 diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index b1156ba..7ac2bf5 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); port->mapbase = res->start; - port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); + port->membase = S3C_VA_UART + (res->start & 0xfffff); ret = platform_get_irq(platdev, 0); if (ret < 0) port->irq = 0; -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-02 1:43 ` Kyungmin Park -1 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-02 1:43 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch adds UART serial port support for S5P6450 SoC. > The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. > And to fix membase which is in serial/samsung.c is from Ben Dooks. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > Cc: Ben Dooks <ben-linux@fluff.org> > --- > arch/arm/plat-s5p/dev-uart.c | 58 ++++++++++++++++++++++++++++++++++++++++++ > drivers/serial/Kconfig | 7 +++-- > drivers/serial/samsung.c | 2 +- > 3 files changed, 63 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c > index a89331e..6a73428 100644 > --- a/arch/arm/plat-s5p/dev-uart.c > +++ b/arch/arm/plat-s5p/dev-uart.c > @@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = { > #endif > }; > > +static struct resource s5p_uart4_resource[] = { > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 > + [0] = { > + .start = S5P_PA_UART4, > + .end = S5P_PA_UART4 + S5P_SZ_UART, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = IRQ_S5P_UART_RX4, > + .end = IRQ_S5P_UART_RX4, > + .flags = IORESOURCE_IRQ, > + }, > + [2] = { > + .start = IRQ_S5P_UART_TX4, > + .end = IRQ_S5P_UART_TX4, > + .flags = IORESOURCE_IRQ, > + }, > + [3] = { > + .start = IRQ_S5P_UART_ERR4, > + .end = IRQ_S5P_UART_ERR4, > + .flags = IORESOURCE_IRQ, > + }, > +#endif > +}; > + > +static struct resource s5p_uart5_resource[] = { > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 > + [0] = { > + .start = S5P_PA_UART5, > + .end = S5P_PA_UART5 + S5P_SZ_UART, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = IRQ_S5P_UART_RX5, > + .end = IRQ_S5P_UART_RX5, > + .flags = IORESOURCE_IRQ, > + }, > + [2] = { > + .start = IRQ_S5P_UART_TX5, > + .end = IRQ_S5P_UART_TX5, > + .flags = IORESOURCE_IRQ, > + }, > + [3] = { > + .start = IRQ_S5P_UART_ERR5, > + .end = IRQ_S5P_UART_ERR5, > + .flags = IORESOURCE_IRQ, > + }, > +#endif > +}; > + > struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { > [0] = { > .resources = s5p_uart0_resource, > @@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { > .resources = s5p_uart3_resource, > .nr_resources = ARRAY_SIZE(s5p_uart3_resource), > }, > + [4] = { > + .resources = s5p_uart4_resource, > + .nr_resources = ARRAY_SIZE(s5p_uart4_resource), > + }, > + [5] = { > + .resources = s5p_uart5_resource, > + .nr_resources = ARRAY_SIZE(s5p_uart5_resource), > + }, > }; > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > index 12900f7..3198c53 100644 > --- a/drivers/serial/Kconfig > +++ b/drivers/serial/Kconfig > @@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS > int > depends on ARM && PLAT_SAMSUNG > default 2 if ARCH_S3C2400 > + default 6 if ARCH_S5P6450 > default 4 if SERIAL_SAMSUNG_UARTS_4 > default 3 > help How about to remove SERIAL_SAMSUNG_UARTS_4 and use the SERIAL_SAMSUNG_UARTS only? > @@ -526,12 +527,12 @@ config SERIAL_S3C24A0 > Serial port support for the Samsung S3C24A0 SoC > > config SERIAL_S3C6400 > - tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support" > - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100) > + tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" > + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) > select SERIAL_SAMSUNG_UARTS_4 > default y > help > - Serial port support for the Samsung S3C6400, S3C6410, S5P6440 > + Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 > and S5PC100 SoCs > > config SERIAL_S5PV210 > diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c > index b1156ba..7ac2bf5 100644 > --- a/drivers/serial/samsung.c > +++ b/drivers/serial/samsung.c > @@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, > dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); > > port->mapbase = res->start; > - port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); > + port->membase = S3C_VA_UART + (res->start & 0xfffff); > ret = platform_get_irq(platdev, 0); > if (ret < 0) > port->irq = 0; > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450 @ 2010-09-02 1:43 ` Kyungmin Park 0 siblings, 0 replies; 52+ messages in thread From: Kyungmin Park @ 2010-09-02 1:43 UTC (permalink / raw) To: linux-arm-kernel On Wed, Sep 1, 2010 at 4:09 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > This patch adds UART serial port support for S5P6450 SoC. > The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. > And to fix membase which is in serial/samsung.c is from Ben Dooks. > > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> > Cc: Ben Dooks <ben-linux@fluff.org> > --- > ?arch/arm/plat-s5p/dev-uart.c | ? 58 ++++++++++++++++++++++++++++++++++++++++++ > ?drivers/serial/Kconfig ? ? ? | ? ?7 +++-- > ?drivers/serial/samsung.c ? ? | ? ?2 +- > ?3 files changed, 63 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c > index a89331e..6a73428 100644 > --- a/arch/arm/plat-s5p/dev-uart.c > +++ b/arch/arm/plat-s5p/dev-uart.c > @@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = { > ?#endif > ?}; > > +static struct resource s5p_uart4_resource[] = { > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 > + ? ? ? [0] = { > + ? ? ? ? ? ? ? .start ?= S5P_PA_UART4, > + ? ? ? ? ? ? ? .end ? ?= S5P_PA_UART4 + S5P_SZ_UART, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM, > + ? ? ? }, > + ? ? ? [1] = { > + ? ? ? ? ? ? ? .start ?= IRQ_S5P_UART_RX4, > + ? ? ? ? ? ? ? .end ? ?= IRQ_S5P_UART_RX4, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > + ? ? ? [2] = { > + ? ? ? ? ? ? ? .start ?= IRQ_S5P_UART_TX4, > + ? ? ? ? ? ? ? .end ? ?= IRQ_S5P_UART_TX4, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > + ? ? ? [3] = { > + ? ? ? ? ? ? ? .start ?= IRQ_S5P_UART_ERR4, > + ? ? ? ? ? ? ? .end ? ?= IRQ_S5P_UART_ERR4, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > +#endif > +}; > + > +static struct resource s5p_uart5_resource[] = { > +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 > + ? ? ? [0] = { > + ? ? ? ? ? ? ? .start ?= S5P_PA_UART5, > + ? ? ? ? ? ? ? .end ? ?= S5P_PA_UART5 + S5P_SZ_UART, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_MEM, > + ? ? ? }, > + ? ? ? [1] = { > + ? ? ? ? ? ? ? .start ?= IRQ_S5P_UART_RX5, > + ? ? ? ? ? ? ? .end ? ?= IRQ_S5P_UART_RX5, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > + ? ? ? [2] = { > + ? ? ? ? ? ? ? .start ?= IRQ_S5P_UART_TX5, > + ? ? ? ? ? ? ? .end ? ?= IRQ_S5P_UART_TX5, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > + ? ? ? [3] = { > + ? ? ? ? ? ? ? .start ?= IRQ_S5P_UART_ERR5, > + ? ? ? ? ? ? ? .end ? ?= IRQ_S5P_UART_ERR5, > + ? ? ? ? ? ? ? .flags ?= IORESOURCE_IRQ, > + ? ? ? }, > +#endif > +}; > + > ?struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { > ? ? ? ?[0] = { > ? ? ? ? ? ? ? ?.resources ? ? ?= s5p_uart0_resource, > @@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { > ? ? ? ? ? ? ? ?.resources ? ? ?= s5p_uart3_resource, > ? ? ? ? ? ? ? ?.nr_resources ? = ARRAY_SIZE(s5p_uart3_resource), > ? ? ? ?}, > + ? ? ? [4] = { > + ? ? ? ? ? ? ? .resources ? ? ?= s5p_uart4_resource, > + ? ? ? ? ? ? ? .nr_resources ? = ARRAY_SIZE(s5p_uart4_resource), > + ? ? ? }, > + ? ? ? [5] = { > + ? ? ? ? ? ? ? .resources ? ? ?= s5p_uart5_resource, > + ? ? ? ? ? ? ? .nr_resources ? = ARRAY_SIZE(s5p_uart5_resource), > + ? ? ? }, > ?}; > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > index 12900f7..3198c53 100644 > --- a/drivers/serial/Kconfig > +++ b/drivers/serial/Kconfig > @@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS > ? ? ? ?int > ? ? ? ?depends on ARM && PLAT_SAMSUNG > ? ? ? ?default 2 if ARCH_S3C2400 > + ? ? ? default 6 if ARCH_S5P6450 > ? ? ? ?default 4 if SERIAL_SAMSUNG_UARTS_4 > ? ? ? ?default 3 > ? ? ? ?help How about to remove SERIAL_SAMSUNG_UARTS_4 and use the SERIAL_SAMSUNG_UARTS only? > @@ -526,12 +527,12 @@ config SERIAL_S3C24A0 > ? ? ? ? ?Serial port support for the Samsung S3C24A0 SoC > > ?config SERIAL_S3C6400 > - ? ? ? tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support" > - ? ? ? depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100) > + ? ? ? tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" > + ? ? ? depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) > ? ? ? ?select SERIAL_SAMSUNG_UARTS_4 > ? ? ? ?default y > ? ? ? ?help > - ? ? ? ? Serial port support for the Samsung S3C6400, S3C6410, S5P6440 > + ? ? ? ? Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 > ? ? ? ? ?and S5PC100 SoCs > > ?config SERIAL_S5PV210 > diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c > index b1156ba..7ac2bf5 100644 > --- a/drivers/serial/samsung.c > +++ b/drivers/serial/samsung.c > @@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, > ? ? ? ?dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); > > ? ? ? ?port->mapbase = res->start; > - ? ? ? port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); > + ? ? ? port->membase = S3C_VA_UART + (res->start & 0xfffff); > ? ? ? ?ret = platform_get_irq(platdev, 0); > ? ? ? ?if (ret < 0) > ? ? ? ? ? ? ? ?port->irq = 0; > -- > 1.6.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at ?http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 13/13] ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 7:09 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc; +Cc: ben-linux, Kukjin Kim This patch updates s5p64x0_defconfig and changes the name from s5p6440_defconfig so that can support S5P6440 and S5P6450 with one kernel. Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../{s5p6440_defconfig => s5p64x0_defconfig} | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) rename arch/arm/configs/{s5p6440_defconfig => s5p64x0_defconfig} (97%) diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p64x0_defconfig similarity index 97% rename from arch/arm/configs/s5p6440_defconfig rename to arch/arm/configs/s5p64x0_defconfig index 0b0266c..2993ecd 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p64x0_defconfig @@ -5,10 +5,11 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6440=y +CONFIG_ARCH_S5P64X0=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDK6440=y +CONFIG_MACH_SMDK6450=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 13/13] ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450 @ 2010-09-01 7:09 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-01 7:09 UTC (permalink / raw) To: linux-arm-kernel This patch updates s5p64x0_defconfig and changes the name from s5p6440_defconfig so that can support S5P6440 and S5P6450 with one kernel. Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- .../{s5p6440_defconfig => s5p64x0_defconfig} | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) rename arch/arm/configs/{s5p6440_defconfig => s5p64x0_defconfig} (97%) diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p64x0_defconfig similarity index 97% rename from arch/arm/configs/s5p6440_defconfig rename to arch/arm/configs/s5p64x0_defconfig index 0b0266c..2993ecd 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p64x0_defconfig @@ -5,10 +5,11 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6440=y +CONFIG_ARCH_S5P64X0=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDK6440=y +CONFIG_MACH_SMDK6450=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support 2010-09-01 7:09 ` Kukjin Kim @ 2010-09-01 11:45 ` Ben Dooks -1 siblings, 0 replies; 52+ messages in thread From: Ben Dooks @ 2010-09-01 11:45 UTC (permalink / raw) To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, ben-linux On Wed, Sep 01, 2010 at 04:09:07PM +0900, Kukjin Kim wrote: > This patches add basic support for Samsung S5P6450 SoC. > > Basically this patch moves mach-s5p6440 (ARCH_S5P6440) to mach-s5p64x0 > (ARCH_S5P64X0) to support Samsung's new S5P6450 SoC. The ARCH_S5P64X0 > can support S5P6440 and S5P6450 with one kernel image. It is tested on > SMDK6440(S5P6440) and SMDK6450(S5P6450) with s5p64x0_defconfig. And > this patch changes s5p6440_defconfig to s5p64x0_defconfig for S5P64X0. What about the s5p6442? -- Ben Q: What's a light-year? A: One-third less calories than a regular year. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support @ 2010-09-01 11:45 ` Ben Dooks 0 siblings, 0 replies; 52+ messages in thread From: Ben Dooks @ 2010-09-01 11:45 UTC (permalink / raw) To: linux-arm-kernel On Wed, Sep 01, 2010 at 04:09:07PM +0900, Kukjin Kim wrote: > This patches add basic support for Samsung S5P6450 SoC. > > Basically this patch moves mach-s5p6440 (ARCH_S5P6440) to mach-s5p64x0 > (ARCH_S5P64X0) to support Samsung's new S5P6450 SoC. The ARCH_S5P64X0 > can support S5P6440 and S5P6450 with one kernel image. It is tested on > SMDK6440(S5P6440) and SMDK6450(S5P6450) with s5p64x0_defconfig. And > this patch changes s5p6440_defconfig to s5p64x0_defconfig for S5P64X0. What about the s5p6442? -- Ben Q: What's a light-year? A: One-third less calories than a regular year. ^ permalink raw reply [flat|nested] 52+ messages in thread
* RE: [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support 2010-09-01 11:45 ` Ben Dooks @ 2010-09-02 10:21 ` Kukjin Kim -1 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 10:21 UTC (permalink / raw) To: 'Ben Dooks'; +Cc: linux-arm-kernel, linux-samsung-soc Ben Dooks wrote: > Hi ;-) > On Wed, Sep 01, 2010 at 04:09:07PM +0900, Kukjin Kim wrote: > > This patches add basic support for Samsung S5P6450 SoC. > > > > Basically this patch moves mach-s5p6440 (ARCH_S5P6440) to mach-s5p64x0 > > (ARCH_S5P64X0) to support Samsung's new S5P6450 SoC. The > ARCH_S5P64X0 > > can support S5P6440 and S5P6450 with one kernel image. It is tested on > > SMDK6440(S5P6440) and SMDK6450(S5P6450) with s5p64x0_defconfig. And > > this patch changes s5p6440_defconfig to s5p64x0_defconfig for S5P64X0. > > What about the s5p6442? > S5P6440 and S5P6450 are each other similar, but S5P6442 differs much with it. ,,,so remains some issues for it now. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support @ 2010-09-02 10:21 ` Kukjin Kim 0 siblings, 0 replies; 52+ messages in thread From: Kukjin Kim @ 2010-09-02 10:21 UTC (permalink / raw) To: linux-arm-kernel Ben Dooks wrote: > Hi ;-) > On Wed, Sep 01, 2010 at 04:09:07PM +0900, Kukjin Kim wrote: > > This patches add basic support for Samsung S5P6450 SoC. > > > > Basically this patch moves mach-s5p6440 (ARCH_S5P6440) to mach-s5p64x0 > > (ARCH_S5P64X0) to support Samsung's new S5P6450 SoC. The > ARCH_S5P64X0 > > can support S5P6440 and S5P6450 with one kernel image. It is tested on > > SMDK6440(S5P6440) and SMDK6450(S5P6450) with s5p64x0_defconfig. And > > this patch changes s5p6440_defconfig to s5p64x0_defconfig for S5P64X0. > > What about the s5p6442? > S5P6440 and S5P6450 are each other similar, but S5P6442 differs much with it. ,,,so remains some issues for it now. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 52+ messages in thread
end of thread, other threads:[~2010-09-02 10:21 UTC | newest] Thread overview: 52+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-09-01 7:09 [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 01/13] ARM: S5P: Moves initial map for merging S5P64X0 Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 9:42 ` Kyungmin Park 2010-09-01 9:42 ` Kyungmin Park 2010-09-01 7:09 ` [PATCH 02/13] ARM: S5P64X0: Update Kconfig and Makefile Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 9:47 ` Kyungmin Park 2010-09-01 9:47 ` Kyungmin Park 2010-09-02 8:25 ` Kukjin Kim 2010-09-02 8:25 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 03/13] ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 04/13] ARM: S5P64X0: Update Clock for S5P6440 and S5P6450 Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 05/13] ARM: S5P64X0: Update IRQ support Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 06/13] ARM: S5P64X0: Update Timer support Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 07/13] ARM: S5P64X0: Update Audio support Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-02 1:44 ` Jassi Brar 2010-09-02 1:44 ` Jassi Brar 2010-09-02 7:30 ` Kukjin Kim 2010-09-02 7:30 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 08/13] ARM: S5P64X0: Move DMA support for S5P64X0 Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-02 1:08 ` Jassi Brar 2010-09-02 1:08 ` Jassi Brar 2010-09-02 7:32 ` Kukjin Kim 2010-09-02 7:32 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 09/13] ARM: S5P64X0: Add S5P6450 I2C support Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 10/13] ARM: S5P64X0: Move GPIO support files for merge S5P64X0 Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 11/13] ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board file Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 10:00 ` Kyungmin Park 2010-09-01 10:00 ` Kyungmin Park 2010-09-02 8:02 ` Kukjin Kim 2010-09-02 8:02 ` Kukjin Kim 2010-09-01 7:09 ` [PATCH 12/13] ARM: S5P64X0: Add UART serial support for S5P6450 Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-02 1:43 ` Kyungmin Park 2010-09-02 1:43 ` Kyungmin Park 2010-09-01 7:09 ` [PATCH 13/13] ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450 Kukjin Kim 2010-09-01 7:09 ` Kukjin Kim 2010-09-01 11:45 ` [PATCH 00/13] ARM: S5P64X0: Add new S5P6450 Support Ben Dooks 2010-09-01 11:45 ` Ben Dooks 2010-09-02 10:21 ` Kukjin Kim 2010-09-02 10:21 ` Kukjin Kim
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.