* [PATCH 1/3] V4L/DVB: bttv: Move PV951 IR to the right driver
[not found] <cover.1285215968.git.mchehab@redhat.com>
@ 2010-09-23 4:32 ` Mauro Carvalho Chehab
2010-09-23 4:32 ` [PATCH 2/3] V4L/DVB: Remove the usage of I2C_HW_B_CX2388x on ir-kbd-i2c.c Mauro Carvalho Chehab
2010-09-23 4:32 ` [PATCH 3/3] V4L/DVB: saa7134: get rid of I2C_HW_SAA7134 Mauro Carvalho Chehab
2 siblings, 0 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2010-09-23 4:32 UTC (permalink / raw)
Cc: Linux Media Mailing List
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 407fa61..d502f41 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -390,41 +390,3 @@ int __devinit init_bttv_i2c(struct bttv *btv)
return btv->i2c_rc;
}
-
-/* Instantiate the I2C IR receiver device, if present */
-void __devinit init_bttv_i2c_ir(struct bttv *btv)
-{
- if (0 == btv->i2c_rc) {
- struct i2c_board_info info;
- /* The external IR receiver is at i2c address 0x34 (0x35 for
- reads). Future Hauppauge cards will have an internal
- receiver at 0x30 (0x31 for reads). In theory, both can be
- fitted, and Hauppauge suggest an external overrides an
- internal.
-
- That's why we probe 0x1a (~0x34) first. CB
- */
- const unsigned short addr_list[] = {
- 0x1a, 0x18, 0x4b, 0x64, 0x30, 0x71,
- I2C_CLIENT_END
- };
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
- }
-}
-
-int __devexit fini_bttv_i2c(struct bttv *btv)
-{
- if (0 != btv->i2c_rc)
- return 0;
-
- return i2c_del_adapter(&btv->c.i2c_adap);
-}
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index f68717a..8c90673 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -245,6 +245,83 @@ static void bttv_ir_stop(struct bttv *btv)
}
}
+/*
+ * Get_key functions used by I2C remotes
+ */
+
+static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char b;
+
+ /* poll IR chip */
+ if (1 != i2c_master_recv(ir->c, &b, 1)) {
+ dprintk(KERN_INFO DEVNAME ": read error\n");
+ return -EIO;
+ }
+
+ /* ignore 0xaa */
+ if (b==0xaa)
+ return 0;
+ dprintk(KERN_INFO DEVNAME ": key %02x\n", b);
+
+ *ir_key = b;
+ *ir_raw = b;
+ return 1;
+}
+
+/* Instantiate the I2C IR receiver device, if present */
+void __devinit init_bttv_i2c_ir(struct bttv *btv)
+{
+ const unsigned short addr_list[] = {
+ 0x1a, 0x18, 0x64, 0x30, 0x71,
+ I2C_CLIENT_END
+ };
+ struct i2c_board_info info;
+
+ if (0 != btv->i2c_rc)
+ return;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ memset(&btv->init_data, 0, sizeof(btv->init_data));
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+
+ switch (btv->c.type) {
+ case BTTV_BOARD_PV951:
+ btv->init_data.name = "PV951";
+ btv->init_data.get_key = get_key_pv951;
+ btv->init_data.ir_codes = RC_MAP_PV951;
+ btv->init_data.type = IR_TYPE_OTHER;
+ info.addr = 0x4b;
+ break;
+ default:
+ /*
+ * The external IR receiver is at i2c address 0x34 (0x35 for
+ * reads). Future Hauppauge cards will have an internal
+ * receiver at 0x30 (0x31 for reads). In theory, both can be
+ * fitted, and Hauppauge suggest an external overrides an
+ * internal.
+ * That's why we probe 0x1a (~0x34) first. CB
+ */
+
+ i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
+ return;
+ }
+
+ if (btv->init_data.name)
+ info.platform_data = &btv->init_data;
+ i2c_new_device(&btv->c.i2c_adap, &info);
+
+ return;
+}
+
+int __devexit fini_bttv_i2c(struct bttv *btv)
+{
+ if (0 != btv->i2c_rc)
+ return 0;
+
+ return i2c_del_adapter(&btv->c.i2c_adap);
+}
+
int bttv_input_init(struct bttv *btv)
{
struct card_ir *ir;
@@ -420,10 +497,3 @@ void bttv_input_fini(struct bttv *btv)
kfree(btv->remote);
btv->remote = NULL;
}
-
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 3ec2402..6fd2a8e 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -18,7 +18,6 @@
#include <linux/i2c.h>
#include <media/v4l2-device.h>
#include <media/ir-common.h>
-#include <media/ir-kbd-i2c.h>
#include <media/i2c-addr.h>
#include <media/tuner.h>
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 6cccc2a..d1e26a4 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -42,7 +42,7 @@
#include <media/videobuf-dma-sg.h>
#include <media/tveeprom.h>
#include <media/ir-common.h>
-
+#include <media/ir-kbd-i2c.h>
#include "bt848.h"
#include "bttv.h"
@@ -271,6 +271,12 @@ int bttv_sub_del_devices(struct bttv_core *core);
extern int no_overlay;
/* ---------------------------------------------------------- */
+/* bttv-input.c */
+
+extern void init_bttv_i2c_ir(struct bttv *btv);
+extern int fini_bttv_i2c(struct bttv *btv);
+
+/* ---------------------------------------------------------- */
/* bttv-driver.c */
/* insmod options */
@@ -279,8 +285,6 @@ extern unsigned int bttv_debug;
extern unsigned int bttv_gpio;
extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
extern int init_bttv_i2c(struct bttv *btv);
-extern void init_bttv_i2c_ir(struct bttv *btv);
-extern int fini_bttv_i2c(struct bttv *btv);
#define bttv_printk if (bttv_verbose) printk
#define dprintk if (bttv_debug >= 1) printk
@@ -366,6 +370,9 @@ struct bttv {
int has_remote;
struct card_ir *remote;
+ /* I2C remote data */
+ struct IR_i2c_init_data init_data;
+
/* locking */
spinlock_t s_lock;
struct mutex lock;
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index ece6e15..02fbd08 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -146,26 +146,6 @@ static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
return 1;
}
-static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
- unsigned char b;
-
- /* poll IR chip */
- if (1 != i2c_master_recv(ir->c, &b, 1)) {
- dprintk(1,"read error\n");
- return -EIO;
- }
-
- /* ignore 0xaa */
- if (b==0xaa)
- return 0;
- dprintk(2,"key %02x\n", b);
-
- *ir_key = b;
- *ir_raw = b;
- return 1;
-}
-
static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char buf[4];
@@ -321,12 +301,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
ir_type = IR_TYPE_OTHER;
ir_codes = RC_MAP_EMPTY;
break;
- case 0x4b:
- name = "PV951";
- ir->get_key = get_key_pv951;
- ir_type = IR_TYPE_OTHER;
- ir_codes = RC_MAP_PV951;
- break;
case 0x18:
case 0x1f:
case 0x1a:
@@ -396,9 +370,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
case IR_KBD_GET_KEY_PIXELVIEW:
ir->get_key = get_key_pixelview;
break;
- case IR_KBD_GET_KEY_PV951:
- ir->get_key = get_key_pv951;
- break;
case IR_KBD_GET_KEY_HAUP:
ir->get_key = get_key_haup;
break;
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 5e96d7a..4102f0d 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -24,7 +24,6 @@ struct IR_i2c {
enum ir_kbd_get_key_fn {
IR_KBD_GET_KEY_CUSTOM = 0,
IR_KBD_GET_KEY_PIXELVIEW,
- IR_KBD_GET_KEY_PV951,
IR_KBD_GET_KEY_HAUP,
IR_KBD_GET_KEY_KNC1,
IR_KBD_GET_KEY_FUSIONHDTV,
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/3] V4L/DVB: Remove the usage of I2C_HW_B_CX2388x on ir-kbd-i2c.c
[not found] <cover.1285215968.git.mchehab@redhat.com>
2010-09-23 4:32 ` [PATCH 1/3] V4L/DVB: bttv: Move PV951 IR to the right driver Mauro Carvalho Chehab
@ 2010-09-23 4:32 ` Mauro Carvalho Chehab
2010-09-23 4:32 ` [PATCH 3/3] V4L/DVB: saa7134: get rid of I2C_HW_SAA7134 Mauro Carvalho Chehab
2 siblings, 0 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2010-09-23 4:32 UTC (permalink / raw)
Cc: Linux Media Mailing List
Move the cx88 specific initialization for Hauppauge XVR remotes
into cx88-input, removing the need for test it inside ir-kbd-i2c.
The reference at cx88 for this symbol, at:
drivers/media/video/cx88/cx88-i2c.c: core->i2c_adap.id = I2C_HW_B_CX2388x;
drivers/media/video/cx88/cx88-vp3054-i2c.c: vp3054_i2c->adap.id = I2C_HW_B_CX2388x;
Can't be removed yet, since lirc-i2c still uses it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index b897f86..f53836b 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -183,41 +183,3 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
return core->i2c_rc;
}
-
-void cx88_i2c_init_ir(struct cx88_core *core)
-{
- /* Instantiate the IR receiver device, if present */
- if (0 == core->i2c_rc) {
- struct i2c_board_info info;
- const unsigned short addr_list[] = {
- 0x18, 0x6b, 0x71,
- I2C_CLIENT_END
- };
- const unsigned short *addrp;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- /*
- * We can't call i2c_new_probed_device() because it uses
- * quick writes for probing and at least some R receiver
- * devices only reply to reads.
- */
- for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
- if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
- I2C_SMBUS_READ, 0,
- I2C_SMBUS_QUICK, NULL) >= 0) {
- info.addr = *addrp;
- i2c_new_device(&core->i2c_adap, &info);
- break;
- }
- }
- }
-}
-
-/* ----------------------------------------------------------------------- */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index eccc5e4..d52ce0e 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -609,13 +609,54 @@ void cx88_ir_irq(struct cx88_core *core)
return;
}
+
+void cx88_i2c_init_ir(struct cx88_core *core)
+{
+ struct i2c_board_info info;
+ const unsigned short addr_list[] = {
+ 0x18, 0x6b, 0x71,
+ I2C_CLIENT_END
+ };
+ const unsigned short *addrp;
+ /* Instantiate the IR receiver device, if present */
+ if (0 != core->i2c_rc)
+ return;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+
+ /*
+ * We can't call i2c_new_probed_device() because it uses
+ * quick writes for probing and at least some RC receiver
+ * devices only reply to reads.
+ * Also, Hauppauge XVR needs to be specified, as address 0x71
+ * conflicts with another remote type used with saa7134
+ */
+ for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
+ info.platform_data = NULL;
+ memset(&core->init_data, 0, sizeof(core->init_data));
+
+ if (*addrp == 0x71) {
+ /* Hauppauge XVR */
+ core->init_data.name = "cx88 Hauppauge XVR remote";
+ core->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW;
+ core->init_data.type = IR_TYPE_RC5;
+ core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+
+ info.platform_data = &core->init_data;
+ }
+ if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
+ I2C_SMBUS_READ, 0,
+ I2C_SMBUS_QUICK, NULL) >= 0) {
+ info.addr = *addrp;
+ i2c_new_device(&core->i2c_adap, &info);
+ break;
+ }
+ }
+}
+
/* ---------------------------------------------------------------------- */
MODULE_AUTHOR("Gerd Knorr, Pavel Machek, Chris Pascoe");
MODULE_DESCRIPTION("input driver for cx88 GPIO-based IR remote controls");
MODULE_LICENSE("GPL");
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index bda9e3e..127118f 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -31,9 +31,8 @@
#include <media/videobuf-dma-sg.h>
#include <media/v4l2-chip-ident.h>
#include <media/cx2341x.h>
-#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
#include <media/videobuf-dvb.h>
-#endif
+#include <media/ir-kbd-i2c.h>
#include "btcx-risc.h"
#include "cx88-reg.h"
@@ -377,6 +376,9 @@ struct cx88_core {
/* IR remote control state */
struct cx88_IR *ir;
+ /* I2C remote data */
+ struct IR_i2c_init_data init_data;
+
struct mutex lock;
/* various v4l controls */
u32 freq;
@@ -650,7 +652,6 @@ extern const struct videobuf_queue_ops cx8800_vbi_qops;
/* cx88-i2c.c */
extern int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci);
-extern void cx88_i2c_init_ir(struct cx88_core *core);
/* ----------------------------------------------------------- */
@@ -688,6 +689,7 @@ int cx88_ir_fini(struct cx88_core *core);
void cx88_ir_irq(struct cx88_core *core);
int cx88_ir_start(struct cx88_core *core);
void cx88_ir_stop(struct cx88_core *core);
+extern void cx88_i2c_init_ir(struct cx88_core *core);
/* ----------------------------------------------------------- */
/* cx88-mpeg.c */
@@ -707,10 +709,3 @@ int cx88_set_freq (struct cx88_core *core,struct v4l2_frequency *f);
int cx88_get_control(struct cx88_core *core, struct v4l2_control *ctl);
int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl);
int cx88_video_mux(struct cx88_core *core, unsigned int input);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 02fbd08..91b2c88 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -325,25 +325,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
ir_type = IR_TYPE_RC5;
ir_codes = RC_MAP_FUSIONHDTV_MCE;
break;
- case 0x0b:
- case 0x47:
- case 0x71:
- if (adap->id == I2C_HW_B_CX2388x) {
- /* Handled by cx88-input */
- name = "CX2388x remote";
- ir_type = IR_TYPE_RC5;
- ir->get_key = get_key_haup_xvr;
- if (hauppauge == 1) {
- ir_codes = RC_MAP_HAUPPAUGE_NEW;
- } else {
- ir_codes = RC_MAP_RC5_TV;
- }
- } else {
- /* Handled by saa7134-input */
- name = "SAA713x remote";
- ir_type = IR_TYPE_OTHER;
- }
- break;
case 0x40:
name = "AVerMedia Cardbus remote";
ir->get_key = get_key_avermedia_cardbus;
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 3/3] V4L/DVB: saa7134: get rid of I2C_HW_SAA7134
[not found] <cover.1285215968.git.mchehab@redhat.com>
2010-09-23 4:32 ` [PATCH 1/3] V4L/DVB: bttv: Move PV951 IR to the right driver Mauro Carvalho Chehab
2010-09-23 4:32 ` [PATCH 2/3] V4L/DVB: Remove the usage of I2C_HW_B_CX2388x on ir-kbd-i2c.c Mauro Carvalho Chehab
@ 2010-09-23 4:32 ` Mauro Carvalho Chehab
2 siblings, 0 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2010-09-23 4:32 UTC (permalink / raw)
Cc: Linux Media Mailing List
The only reason for keeping I2C_HW_SAA7134 is to allow setting a
per-device polling interval. Just move this info to the platform
data, allowing drivers to change it per device, where needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 91b2c88..5a000c6 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -259,15 +259,9 @@ static void ir_key_poll(struct IR_i2c *ir)
static void ir_work(struct work_struct *work)
{
struct IR_i2c *ir = container_of(work, struct IR_i2c, work.work);
- int polling_interval = 100;
-
- /* MSI TV@nywhere Plus requires more frequent polling
- otherwise it will miss some keypresses */
- if (ir->c->adapter->id == I2C_HW_SAA7134 && ir->c->addr == 0x30)
- polling_interval = 50;
ir_key_poll(ir);
- schedule_delayed_work(&ir->work, msecs_to_jiffies(polling_interval));
+ schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling_interval));
}
/* ----------------------------------------------------------------------- */
@@ -292,6 +286,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
ir->c = client;
ir->input = input_dev;
+ ir->polling_interval = DEFAULT_POLLING_INTERVAL;
i2c_set_clientdata(client, ir);
switch(addr) {
@@ -343,6 +338,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (init_data->type)
ir_type = init_data->type;
+ if (init_data->polling_interval)
+ ir->polling_interval = init_data->polling_interval;
+
switch (init_data->internal_get_key_func) {
case IR_KBD_GET_KEY_CUSTOM:
/* The bridge driver provided us its own function */
diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index da41b6b..2d3f6d2 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -328,7 +328,6 @@ static struct i2c_algorithm saa7134_algo = {
static struct i2c_adapter saa7134_adap_template = {
.owner = THIS_MODULE,
.name = "saa7134",
- .id = I2C_HW_SAA7134,
.algo = &saa7134_algo,
};
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 0b336ca..52a1ee5 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -959,6 +959,11 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
dev->init_data.name = "MSI TV@nywhere Plus";
dev->init_data.get_key = get_key_msi_tvanywhere_plus;
dev->init_data.ir_codes = RC_MAP_MSI_TVANYWHERE_PLUS;
+ /*
+ * MSI TV@nyware Plus requires more frequent polling
+ * otherwise it will miss some keypresses
+ */
+ dev->init_data.polling_interval = 50;
info.addr = 0x30;
/* MSI TV@nywhere Plus controller doesn't seem to
respond to probes unless we read something from
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 4102f0d..557c676 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -3,6 +3,8 @@
#include <media/ir-common.h>
+#define DEFAULT_POLLING_INTERVAL 100 /* ms */
+
struct IR_i2c;
struct IR_i2c {
@@ -15,6 +17,8 @@ struct IR_i2c {
/* Used to avoid fast repeating */
unsigned char old;
+ u32 polling_interval; /* in ms */
+
struct delayed_work work;
char name[32];
char phys[32];
@@ -34,8 +38,9 @@ enum ir_kbd_get_key_fn {
/* Can be passed when instantiating an ir_video i2c device */
struct IR_i2c_init_data {
char *ir_codes;
- const char *name;
- u64 type; /* IR_TYPE_RC5, etc */
+ const char *name;
+ u64 type; /* IR_TYPE_RC5, etc */
+ u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
/*
* Specify either a function pointer or a value indicating one of
* ir_kbd_i2c's internal get_key functions
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-09-23 4:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <cover.1285215968.git.mchehab@redhat.com>
2010-09-23 4:32 ` [PATCH 1/3] V4L/DVB: bttv: Move PV951 IR to the right driver Mauro Carvalho Chehab
2010-09-23 4:32 ` [PATCH 2/3] V4L/DVB: Remove the usage of I2C_HW_B_CX2388x on ir-kbd-i2c.c Mauro Carvalho Chehab
2010-09-23 4:32 ` [PATCH 3/3] V4L/DVB: saa7134: get rid of I2C_HW_SAA7134 Mauro Carvalho Chehab
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.