From: Wu Fengguang <fengguang.wu@intel.com>
To: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: Microphone not working on PCI ID 8086:3b56
Date: Tue, 28 Sep 2010 21:42:36 +0800 [thread overview]
Message-ID: <20100928134236.GA15827@localhost> (raw)
In-Reply-To: <AANLkTimHO7OLrr+MN4pYmtOS7gF1qiXGP34Jkien0MpO@mail.gmail.com>
On Tue, Sep 28, 2010 at 09:33:11PM +0800, Jeff Chua wrote:
> On Tue, Sep 28, 2010 at 2:18 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > At Tue, 28 Sep 2010 01:56:44 +0800,
> > Jeff Chua wrote:
> >>
> >> On Mon, Sep 27, 2010 at 10:42 PM, Takashi Iwai <tiwai@suse.de> wrote:
> >> > At Wed, 15 Sep 2010 06:32:22 +0800 (SGT),
> >> > Did you try to play with model option for snd-hda-intel driver?
> >> > For example, model=lenovo-x200 ?
> >>
> >> Didn't know there's such option. But I'll try it now. Is there an
> >> option to if the driver is not compiled as a module?
> >
> > Yes, you can pass via a boot option like MODULENAME.OPTIONNAME=xxx,yyy,...
> > In this case, snd-hda-intel.model=lenovo-x200
>
> Tried, still no mic. Perhaps I'm not using the right driver. Which one
> should I enable?
>
> CONFIG_SND_HDA_CODEC_CONEXANT
The "lenovo-x200" model is provided by the above codec.
> CONFIG_SND_HDA_CODEC_INTELHDMI
> CONFIG_SND_HDA_CODEC_REALTEK
It's easier to enable all of them. They are small modules.
Thanks,
Fengguang
WARNING: multiple messages have this Message-ID (diff)
From: Wu Fengguang <fengguang.wu@intel.com>
To: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>,
Linux Kernel <linux-kernel@vger.kernel.org>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: Re: Microphone not working on PCI ID 8086:3b56
Date: Tue, 28 Sep 2010 21:42:36 +0800 [thread overview]
Message-ID: <20100928134236.GA15827@localhost> (raw)
In-Reply-To: <AANLkTimHO7OLrr+MN4pYmtOS7gF1qiXGP34Jkien0MpO@mail.gmail.com>
On Tue, Sep 28, 2010 at 09:33:11PM +0800, Jeff Chua wrote:
> On Tue, Sep 28, 2010 at 2:18 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > At Tue, 28 Sep 2010 01:56:44 +0800,
> > Jeff Chua wrote:
> >>
> >> On Mon, Sep 27, 2010 at 10:42 PM, Takashi Iwai <tiwai@suse.de> wrote:
> >> > At Wed, 15 Sep 2010 06:32:22 +0800 (SGT),
> >> > Did you try to play with model option for snd-hda-intel driver?
> >> > For example, model=lenovo-x200 ?
> >>
> >> Didn't know there's such option. But I'll try it now. Is there an
> >> option to if the driver is not compiled as a module?
> >
> > Yes, you can pass via a boot option like MODULENAME.OPTIONNAME=xxx,yyy,...
> > In this case, snd-hda-intel.model=lenovo-x200
>
> Tried, still no mic. Perhaps I'm not using the right driver. Which one
> should I enable?
>
> CONFIG_SND_HDA_CODEC_CONEXANT
The "lenovo-x200" model is provided by the above codec.
> CONFIG_SND_HDA_CODEC_INTELHDMI
> CONFIG_SND_HDA_CODEC_REALTEK
It's easier to enable all of them. They are small modules.
Thanks,
Fengguang
next prev parent reply other threads:[~2010-09-28 13:42 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-14 22:32 Microphone not working on PCI ID 8086:3b56 Jeff Chua
2010-09-14 22:59 ` Fwd: " Jeff Chua
2010-09-27 14:42 ` Takashi Iwai
2010-09-27 17:56 ` Jeff Chua
2010-09-27 18:18 ` Takashi Iwai
2010-09-28 13:33 ` Jeff Chua
2010-09-28 13:33 ` Jeff Chua
2010-09-28 13:42 ` Takashi Iwai
2010-09-28 13:42 ` [alsa-devel] " Takashi Iwai
2010-09-28 13:42 ` Wu Fengguang [this message]
2010-09-28 13:42 ` Wu Fengguang
-- strict thread matches above, loose matches on Subject: below --
2010-09-30 13:11 Jeff Chua
2010-09-30 13:11 ` Jeff Chua
2010-09-30 13:14 ` Takashi Iwai
2010-09-30 13:14 ` Takashi Iwai
2010-09-30 15:29 ` Jeff Chua
2010-09-30 15:29 ` Jeff Chua
2010-09-30 15:38 ` Wu Fengguang
2010-09-30 15:38 ` Wu Fengguang
2010-09-30 18:26 ` Jeff Chua
2010-09-30 18:26 ` Jeff Chua
2010-09-30 15:39 ` Takashi Iwai
2010-09-30 15:39 ` Takashi Iwai
2010-09-30 15:45 ` Wu Fengguang
2010-09-30 15:45 ` Wu Fengguang
2010-09-30 18:08 ` Jeff Chua
2010-10-01 2:15 ` Wu Fengguang
2010-10-01 2:15 ` Wu Fengguang
2010-10-01 10:15 ` Jeff Chua
2010-10-01 10:15 ` Jeff Chua
2010-10-01 10:18 ` Takashi Iwai
2010-10-01 10:18 ` Takashi Iwai
2010-10-01 17:10 ` Jeff Chua
2011-03-18 17:55 ` Jeff Chua
2011-03-18 17:55 ` Jeff Chua
2010-09-30 17:31 ` Jeff Chua
2010-09-30 17:31 ` Jeff Chua
2010-09-30 13:29 ` Wu Fengguang
2010-09-30 13:29 ` Wu Fengguang
2010-09-30 15:34 ` Jeff Chua
2010-09-30 15:34 ` Jeff Chua
2010-09-30 15:41 ` Takashi Iwai
2010-09-30 15:41 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100928134236.GA15827@localhost \
--to=fengguang.wu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=jeff.chua.linux@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.