From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/08] ARM: Add CONFIG_DEFAULT_IRQ_DEMUX
Date: Wed, 06 Oct 2010 07:18:29 +0000 [thread overview]
Message-ID: <20101006071829.28048.45307.sendpatchset@t400s> (raw)
In-Reply-To: <20101006071731.28048.89938.sendpatchset@t400s>
From: Magnus Damm <damm@opensource.se>
Add a CONFIG_DEFAULT_IRQ_DEMUX to allow removing the
default IRQ demuxer from the ARM kernel. This will
reduce the memory footprint and also remove the need
for some of the macros in entry-macro.S.
In the case of CONFIG_DEFAULT_IRQ_DEMUX=n the default
IRQ demux code is omitted from the kernel and the per-
mach/plat demux code must then be registered using the
function setup_irq_stubs(). CONFIG_DEFAULT_IRQ_DEMUX=y
keeps the default IRQ demuxer code as-is in the kernel.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/Kconfig | 3 +++
arch/arm/kernel/entry-armv.S | 13 +++++++++++--
2 files changed, 14 insertions(+), 2 deletions(-)
--- 0001/arch/arm/Kconfig
+++ work/arch/arm/Kconfig 2010-10-05 20:36:45.000000000 +0900
@@ -1337,6 +1337,9 @@ config SPARSE_IRQ
number of off-chip IRQs will want to treat this as
experimental until they have been independently verified.
+config DEFAULT_IRQ_DEMUX
+ def_bool y
+
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
--- 0009/arch/arm/kernel/entry-armv.S
+++ work/arch/arm/kernel/entry-armv.S 2010-10-05 20:34:16.000000000 +0900
@@ -128,8 +128,9 @@ __dabt_svc:
UNWIND(.fnend )
ENDPROC(__dabt_svc)
+#ifdef CONFIG_DEFAULT_IRQ_DEMUX
__irq_svc default
-
+#endif
.align 5
__und_svc:
#ifdef CONFIG_KPROBES
@@ -258,8 +259,9 @@ __dabt_usr:
UNWIND(.fnend )
ENDPROC(__dabt_usr)
+#ifdef CONFIG_DEFAULT_IRQ_DEMUX
__irq_usr default
-
+#endif
.align 5
__und_usr:
usr_entry
@@ -885,10 +887,17 @@ __stubs_start:
.globl __stubs_irq
__stubs_irq:
+#ifdef CONFIG_DEFAULT_IRQ_DEMUX
.long __irq_usr_default @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
.long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
.long __irq_svc_default @ 3 (SVC_26 / SVC_32)
+#else
+ .long __irq_invalid @ 0 (USR_26 / USR_32)
+ .long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
+ .long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
+ .long __irq_invalid @ 3 (SVC_26 / SVC_32)
+#endif
.long __irq_invalid @ 4
.long __irq_invalid @ 5
.long __irq_invalid @ 6
WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/08] ARM: Add CONFIG_DEFAULT_IRQ_DEMUX
Date: Wed, 06 Oct 2010 16:18:29 +0900 [thread overview]
Message-ID: <20101006071829.28048.45307.sendpatchset@t400s> (raw)
In-Reply-To: <20101006071731.28048.89938.sendpatchset@t400s>
From: Magnus Damm <damm@opensource.se>
Add a CONFIG_DEFAULT_IRQ_DEMUX to allow removing the
default IRQ demuxer from the ARM kernel. This will
reduce the memory footprint and also remove the need
for some of the macros in entry-macro.S.
In the case of CONFIG_DEFAULT_IRQ_DEMUX=n the default
IRQ demux code is omitted from the kernel and the per-
mach/plat demux code must then be registered using the
function setup_irq_stubs(). CONFIG_DEFAULT_IRQ_DEMUX=y
keeps the default IRQ demuxer code as-is in the kernel.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/Kconfig | 3 +++
arch/arm/kernel/entry-armv.S | 13 +++++++++++--
2 files changed, 14 insertions(+), 2 deletions(-)
--- 0001/arch/arm/Kconfig
+++ work/arch/arm/Kconfig 2010-10-05 20:36:45.000000000 +0900
@@ -1337,6 +1337,9 @@ config SPARSE_IRQ
number of off-chip IRQs will want to treat this as
experimental until they have been independently verified.
+config DEFAULT_IRQ_DEMUX
+ def_bool y
+
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
--- 0009/arch/arm/kernel/entry-armv.S
+++ work/arch/arm/kernel/entry-armv.S 2010-10-05 20:34:16.000000000 +0900
@@ -128,8 +128,9 @@ __dabt_svc:
UNWIND(.fnend )
ENDPROC(__dabt_svc)
+#ifdef CONFIG_DEFAULT_IRQ_DEMUX
__irq_svc default
-
+#endif
.align 5
__und_svc:
#ifdef CONFIG_KPROBES
@@ -258,8 +259,9 @@ __dabt_usr:
UNWIND(.fnend )
ENDPROC(__dabt_usr)
+#ifdef CONFIG_DEFAULT_IRQ_DEMUX
__irq_usr default
-
+#endif
.align 5
__und_usr:
usr_entry
@@ -885,10 +887,17 @@ __stubs_start:
.globl __stubs_irq
__stubs_irq:
+#ifdef CONFIG_DEFAULT_IRQ_DEMUX
.long __irq_usr_default @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
.long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
.long __irq_svc_default @ 3 (SVC_26 / SVC_32)
+#else
+ .long __irq_invalid @ 0 (USR_26 / USR_32)
+ .long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
+ .long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
+ .long __irq_invalid @ 3 (SVC_26 / SVC_32)
+#endif
.long __irq_invalid @ 4
.long __irq_invalid @ 5
.long __irq_invalid @ 6
next prev parent reply other threads:[~2010-10-06 7:18 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-06 7:17 [PATCH 00/08] ARM: Dynamic IRQ demux support Magnus Damm
2010-10-06 7:17 ` Magnus Damm
2010-10-06 7:17 ` [PATCH 01/08] ARM: Move entry-header.S to asm/ Magnus Damm
2010-10-06 7:17 ` Magnus Damm
2010-10-06 7:17 ` [PATCH 02/08] ARM: Move macros from entry-armv.S Magnus Damm
2010-10-06 7:17 ` Magnus Damm
2010-10-06 7:17 ` [PATCH 03/08] ARM: Make alignment_trap macro self-contained Magnus Damm
2010-10-06 7:17 ` Magnus Damm
2010-10-06 7:18 ` [PATCH 04/08] ARM: Convert __irq_svc and __usr_svc to macros Magnus Damm
2010-10-06 7:18 ` Magnus Damm
2010-10-06 7:18 ` [PATCH 05/08] ARM: Move the unwind header to entry-header.S Magnus Damm
2010-10-06 7:18 ` Magnus Damm
2010-10-06 7:18 ` [PATCH 06/08] ARM: Add setup_irq_stubs() function Magnus Damm
2010-10-06 7:18 ` Magnus Damm
2010-10-06 7:18 ` Magnus Damm [this message]
2010-10-06 7:18 ` [PATCH 07/08] ARM: Add CONFIG_DEFAULT_IRQ_DEMUX Magnus Damm
2010-10-06 7:18 ` [PATCH 08/08] ARM: Dynamic IRQ demux for SH-Mobile Magnus Damm
2010-10-06 7:18 ` Magnus Damm
2010-10-06 13:06 ` [PATCH 00/08] ARM: Dynamic IRQ demux support Eric Miao
2010-10-06 13:06 ` Eric Miao
2010-10-06 14:58 ` Grant Likely
2010-10-06 14:58 ` Grant Likely
2010-10-06 15:06 ` Eric Miao
2010-10-06 15:06 ` Eric Miao
2010-10-06 15:11 ` Eric Miao
2010-10-06 15:11 ` Eric Miao
2010-10-06 15:26 ` Grant Likely
2010-10-06 15:26 ` Grant Likely
2010-10-06 15:38 ` Eric Miao
2010-10-06 15:38 ` Eric Miao
2010-10-07 6:39 ` Magnus Damm
2010-10-07 6:39 ` Magnus Damm
2010-10-08 7:09 ` Eric Miao
2010-10-08 7:09 ` Eric Miao
2010-10-14 10:50 ` Magnus Damm
2010-10-14 10:50 ` Magnus Damm
2010-10-16 3:53 ` Grant Likely
2010-10-16 3:53 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101006071829.28048.45307.sendpatchset@t400s \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.