[PATCH] omap3evm: Add vio regulator supply required for ads7846 driver

[PATCH] omap3evm: Add vio regulator supply required for ads7846 driver

[hvaibhav]

From: Vaibhav Hiremath <hvaibhav@ti.com>


Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
---
 arch/arm/mach-omap2/board-omap3evm.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 633c89e..34db4e4 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -532,6 +532,25 @@ static struct regulator_init_data omap3_evm_vpll2 = {
 	.consumer_supplies	= &omap3_evm_vpll2_supply,
 };
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply omap3evm_vio_supply =
+	REGULATOR_SUPPLY("vcc", "spi1.0");
+
+/* VIO for ads7846 */
+static struct regulator_init_data omap3evm_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vio_supply,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -544,6 +563,7 @@ static struct twl4030_platform_data omap3evm_twldata = {
 	.codec		= &omap3evm_codec_data,
 	.vdac		= &omap3_evm_vdac,
 	.vpll2		= &omap3_evm_vpll2,
+	.vio		= &omap3evm_vio,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
-- 
1.6.2.4

Re: [PATCH] omap3evm: Add vio regulator supply required for ads7846 driver

[Tony Lindgren]

* hvaibhav@ti.com <hvaibhav@ti.com> [101007 09:12]:
> From: Vaibhav Hiremath <hvaibhav@ti.com>

Missing description. Also please always Cc linux-arm-kernel for
any arch/arm/*omap*/ patches so I don't have to repost them.

Regards,

Tony