* Hauppauge WinTV PVR USB2 problems
@ 2010-10-20 4:04 Jim Peters
0 siblings, 0 replies; only message in thread
From: Jim Peters @ 2010-10-20 4:04 UTC (permalink / raw)
To: linux-media
I have 4 of these tuners, 3 of them are the 24xx series and 1 is a 29xx
series, at one time they all worked great and I am not sure what happened to
cause this but at some point the 29xx tuner started outputting black and white
video. At first I suspected a hardware failure and thought maybe it was in the
analog tuner part of the card so I switched it over to using the composite
side but this didn't help. As a last resort to chalking it up as a failed
piece of hardware I tried it on a windows machine and it works fine there so I
am under the impression that this must be a driver/firmware issue. Since my
other 3 tuners don't have a problem I assume that there must be some part of
the driver/firmware that only affects the 29xx series cards and the problem lies
within this, I have no idea where to look for a solution, any help would be
appreciated.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-10-20 4:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-20 4:04 Hauppauge WinTV PVR USB2 problems Jim Peters
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.