From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Joe Perches <joe@perches.com>
Cc: Jean Delvare <khali@linux-fr.org>,
Hans de Goede <j.w.r.degoede@hhs.nl>,
Alistair John Strachan <alistair@devzero.co.uk>,
Henrik Rydberg <rydberg@euromail.se>,
"Mark M. Hoffman" <mhoffman@lightlink.com>,
Luca Tettamanti <kronos.it@gmail.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Juerg Haefliger <juergh@gmail.com>,
Eric Piel <eric.piel@tremplin-utc.net>,
Jim Cromie <jim.cromie@gmail.com>,
Roger Lucas <vt8231@hiddenengine.co.uk>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [lm-sensors] [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
Date: Wed, 20 Oct 2010 18:35:44 +0000 [thread overview]
Message-ID: <20101020183544.GA22966@ericsson.com> (raw)
In-Reply-To: <1287597762.1813.217.camel@Joe-Laptop>
On Wed, Oct 20, 2010 at 02:02:42PM -0400, Joe Perches wrote:
> On Wed, 2010-10-20 at 10:48 -0700, Guenter Roeck wrote:
> > The modified define in kernel.org would only apply if pr_fmt isn't already defined,
> > so that argument is not really correct. The real difference would be that you could
> > then remove the individual pr_fmt defines from 211 files, and all users of pr_fmt
> > without module name (ie those hard to read) would be easier to read/identify.
>
> I think that's not a good idea for now,
> though I agree with the general concept.
>
> This is in kernel.h now.
>
> #ifndef pr_fmt
> #define pr_fmt(fmt) fmt
> #endif
>
> A lot of the pr_<level> calls already include
> some internal prefix.
>
> Try:
> $ grep -rP --include=*.[ch] -oh "\bpr_\w+\s*\(\s*\"\w+:" * | \
> cut -f2- -d"(" | sort | uniq -c | sort -rn
>
> You're suggesting modifying 100+ files to get the
> same output used now.
>
Yes, plus another 200+ files to remove the then-unnecessary existing pr_fmt defines.
> I think doing something like this after some more
> generally accepted agreement is reached on how best
> to do it would be better.
>
Sounds like the ~400 definitions of TRUE and FALSE in the code base I am working with here.
My take is that the time to reach such an agreement is now, to avoid cluttering more code
with pr_fmt defines. The longer we wait, the more difficult it will get to reach an agreement,
since more and more subsystems will be affected.
Personally, I think the pr_fmt cleanup should be more important than replacing printk
with pr_<level>. But I'll defer to Jean's judgement on this one, and follow his lead.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Joe Perches <joe@perches.com>
Cc: Jean Delvare <khali@linux-fr.org>,
Hans de Goede <j.w.r.degoede@hhs.nl>,
Alistair John Strachan <alistair@devzero.co.uk>,
Henrik Rydberg <rydberg@euromail.se>,
"Mark M. Hoffman" <mhoffman@lightlink.com>,
Luca Tettamanti <kronos.it@gmail.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Juerg Haefliger <juergh@gmail.com>,
Eric Piel <eric.piel@tremplin-utc.net>,
Jim Cromie <jim.cromie@gmail.com>,
Roger Lucas <vt8231@hiddenengine.co.uk>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
Date: Wed, 20 Oct 2010 11:35:44 -0700 [thread overview]
Message-ID: <20101020183544.GA22966@ericsson.com> (raw)
In-Reply-To: <1287597762.1813.217.camel@Joe-Laptop>
On Wed, Oct 20, 2010 at 02:02:42PM -0400, Joe Perches wrote:
> On Wed, 2010-10-20 at 10:48 -0700, Guenter Roeck wrote:
> > The modified define in kernel.org would only apply if pr_fmt isn't already defined,
> > so that argument is not really correct. The real difference would be that you could
> > then remove the individual pr_fmt defines from 211 files, and all users of pr_fmt
> > without module name (ie those hard to read) would be easier to read/identify.
>
> I think that's not a good idea for now,
> though I agree with the general concept.
>
> This is in kernel.h now.
>
> #ifndef pr_fmt
> #define pr_fmt(fmt) fmt
> #endif
>
> A lot of the pr_<level> calls already include
> some internal prefix.
>
> Try:
> $ grep -rP --include=*.[ch] -oh "\bpr_\w+\s*\(\s*\"\w+:" * | \
> cut -f2- -d"(" | sort | uniq -c | sort -rn
>
> You're suggesting modifying 100+ files to get the
> same output used now.
>
Yes, plus another 200+ files to remove the then-unnecessary existing pr_fmt defines.
> I think doing something like this after some more
> generally accepted agreement is reached on how best
> to do it would be better.
>
Sounds like the ~400 definitions of TRUE and FALSE in the code base I am working with here.
My take is that the time to reach such an agreement is now, to avoid cluttering more code
with pr_fmt defines. The longer we wait, the more difficult it will get to reach an agreement,
since more and more subsystems will be affected.
Personally, I think the pr_fmt cleanup should be more important than replacing printk
with pr_<level>. But I'll defer to Jean's judgement on this one, and follow his lead.
Guenter
next prev parent reply other threads:[~2010-10-20 18:35 UTC|newest]
Thread overview: 208+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-19 23:13 [lm-sensors] [PATCH] drivers/hwmon: Use pr_fmt and pr_<level> Joe Perches
2010-10-19 23:13 ` Joe Perches
2010-10-20 3:29 ` [lm-sensors] " Guenter Roeck
2010-10-20 3:29 ` Guenter Roeck
2010-10-20 3:34 ` [lm-sensors] " Joe Perches
2010-10-20 3:34 ` Joe Perches
2010-10-20 3:53 ` [lm-sensors] " Guenter Roeck
2010-10-20 3:53 ` Guenter Roeck
2010-10-20 4:07 ` [lm-sensors] " Joe Perches
2010-10-20 4:07 ` Joe Perches
2010-10-20 6:04 ` [lm-sensors] " Henrik Rydberg
2010-10-20 6:04 ` Henrik Rydberg
2010-10-20 7:34 ` [lm-sensors] " Jean Delvare
2010-10-20 7:34 ` Jean Delvare
2010-10-20 14:46 ` [lm-sensors] " Guenter Roeck
2010-10-20 14:46 ` Guenter Roeck
2010-10-20 16:08 ` [lm-sensors] " Joe Perches
2010-10-20 16:08 ` Joe Perches
2010-10-20 16:45 ` [lm-sensors] " Jean Delvare
2010-10-20 16:45 ` Jean Delvare
2010-10-20 16:38 ` [lm-sensors] " Jean Delvare
2010-10-20 16:38 ` Jean Delvare
2010-10-20 16:43 ` [lm-sensors] " Guenter Roeck
2010-10-20 16:43 ` Guenter Roeck
2010-10-20 16:46 ` [lm-sensors] " Jean Delvare
2010-10-20 16:46 ` Jean Delvare
2010-10-20 18:03 ` [lm-sensors] " Guenter Roeck
2010-10-20 18:03 ` Guenter Roeck
2010-10-20 16:27 ` [lm-sensors] " Joe Perches
2010-10-20 16:27 ` Joe Perches
2010-10-20 16:42 ` [lm-sensors] " Jean Delvare
2010-10-20 16:42 ` Jean Delvare
2010-10-20 6:51 ` [lm-sensors] [PATCH 00/32] " Joe Perches
2010-10-20 6:51 ` Joe Perches
2010-10-20 6:51 ` [lm-sensors] [PATCH 01/32] drivers/hwmon/abituguru.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 01/32] drivers/hwmon/abituguru.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:25 ` [lm-sensors] [01/32] drivers/hwmon/abituguru.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:25 ` [01/32] drivers/hwmon/abituguru.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 02/32] drivers/hwmon/abituguru3.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 02/32] drivers/hwmon/abituguru3.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:28 ` [lm-sensors] [02/32] drivers/hwmon/abituguru3.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:28 ` [02/32] drivers/hwmon/abituguru3.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 03/32] drivers/hwmon/adt7470.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 03/32] drivers/hwmon/adt7470.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:29 ` [lm-sensors] [03/32] drivers/hwmon/adt7470.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:29 ` [03/32] drivers/hwmon/adt7470.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 04/32] drivers/hwmon/applesmc.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 04/32] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level> Joe Perches
2010-10-20 9:54 ` [lm-sensors] [PATCH 04/32] drivers/hwmon/applesmc.c: Use pr_fmt Henrik Rydberg
2010-10-20 9:54 ` [PATCH 04/32] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level> Henrik Rydberg
2010-11-09 16:35 ` [lm-sensors] [04/32] drivers/hwmon/applesmc.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:35 ` [04/32] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 05/32] drivers/hwmon/asb100.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 05/32] drivers/hwmon/asb100.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:35 ` [lm-sensors] [05/32] drivers/hwmon/asb100.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:35 ` [05/32] drivers/hwmon/asb100.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:37 ` [lm-sensors] [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt Guenter Roeck
2010-11-09 16:37 ` [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-11-09 20:15 ` [lm-sensors] [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt Luca Tettamanti
2010-11-09 20:15 ` [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level> Luca Tettamanti
2010-11-09 20:34 ` [lm-sensors] [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt Guenter Roeck
2010-11-09 20:34 ` [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 07/32] drivers/hwmon/coretemp.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 07/32] drivers/hwmon/coretemp.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:38 ` [lm-sensors] [07/32] drivers/hwmon/coretemp.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:38 ` [07/32] drivers/hwmon/coretemp.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 08/32] drivers/hwmon/dme1737.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 08/32] drivers/hwmon/dme1737.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:39 ` [lm-sensors] [08/32] drivers/hwmon/dme1737.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:39 ` [08/32] drivers/hwmon/dme1737.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 09/32] drivers/hwmon/f71805f.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 09/32] drivers/hwmon/f71805f.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:40 ` [lm-sensors] [09/32] drivers/hwmon/f71805f.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:40 ` [09/32] drivers/hwmon/f71805f.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 10/32] drivers/hwmon/f71882fg.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 10/32] drivers/hwmon/f71882fg.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:41 ` [lm-sensors] [10/32] drivers/hwmon/f71882fg.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:41 ` [10/32] drivers/hwmon/f71882fg.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 11/32] drivers/hwmon/hp_accel.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 11/32] drivers/hwmon/hp_accel.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:42 ` [lm-sensors] [11/32] drivers/hwmon/hp_accel.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:42 ` [11/32] drivers/hwmon/hp_accel.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 12/32] drivers/hwmon/hwmon-vid.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 12/32] drivers/hwmon/hwmon-vid.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:43 ` [lm-sensors] [12/32] drivers/hwmon/hwmon-vid.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:43 ` [12/32] drivers/hwmon/hwmon-vid.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 13/32] drivers/hwmon/hwmon.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 13/32] drivers/hwmon/hwmon.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:44 ` [lm-sensors] [13/32] drivers/hwmon/hwmon.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:44 ` [13/32] drivers/hwmon/hwmon.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 14/32] drivers/hwmon/ibmaem.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 14/32] drivers/hwmon/ibmaem.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:44 ` [lm-sensors] [14/32] drivers/hwmon/ibmaem.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:44 ` [14/32] drivers/hwmon/ibmaem.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 15/32] drivers/hwmon/it87.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 15/32] drivers/hwmon/it87.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 9:21 ` [lm-sensors] [PATCH 15/32] drivers/hwmon/it87.c: Use pr_fmt and Jean Delvare
2010-11-09 9:21 ` [PATCH 15/32] drivers/hwmon/it87.c: Use pr_fmt and pr_<level> Jean Delvare
2010-10-20 6:51 ` [lm-sensors] [PATCH 16/32] drivers/hwmon/lis3lv02d.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 16/32] drivers/hwmon/lis3lv02d.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:46 ` [lm-sensors] [16/32] drivers/hwmon/lis3lv02d.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:46 ` [16/32] drivers/hwmon/lis3lv02d.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 17/32] drivers/hwmon/lm70.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 17/32] drivers/hwmon/lm70.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:47 ` [lm-sensors] [17/32] drivers/hwmon/lm70.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:47 ` [17/32] drivers/hwmon/lm70.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 18/32] drivers/hwmon/lm78.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 18/32] drivers/hwmon/lm78.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 9:25 ` [lm-sensors] [PATCH 18/32] drivers/hwmon/lm78.c: Use pr_fmt and Jean Delvare
2010-11-09 9:25 ` [PATCH 18/32] drivers/hwmon/lm78.c: Use pr_fmt and pr_<level> Jean Delvare
2010-10-20 6:51 ` [lm-sensors] [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 9:31 ` [lm-sensors] [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt Jean Delvare
2010-11-09 9:31 ` [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level> Jean Delvare
2010-11-09 9:59 ` [lm-sensors] [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt Joe Perches
2010-11-09 9:59 ` [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 12:08 ` [lm-sensors] [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt Jean Delvare
2010-11-09 12:08 ` [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level> Jean Delvare
2010-10-20 6:51 ` [lm-sensors] [PATCH 20/32] drivers/hwmon/pc87427.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 20/32] drivers/hwmon/pc87427.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 9:35 ` [lm-sensors] [PATCH 20/32] drivers/hwmon/pc87427.c: Use pr_fmt Jean Delvare
2010-11-09 9:35 ` [PATCH 20/32] drivers/hwmon/pc87427.c: Use pr_fmt and pr_<level> Jean Delvare
2010-10-20 6:51 ` [lm-sensors] [PATCH 21/32] drivers/hwmon/pcf8591.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 21/32] drivers/hwmon/pcf8591.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:49 ` [lm-sensors] [21/32] drivers/hwmon/pcf8591.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:49 ` [21/32] drivers/hwmon/pcf8591.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 22/32] drivers/hwmon/pkgtemp.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 22/32] drivers/hwmon/pkgtemp.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:50 ` [lm-sensors] [22/32] drivers/hwmon/pkgtemp.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:50 ` [22/32] drivers/hwmon/pkgtemp.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 23/32] drivers/hwmon/sis5595.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 23/32] drivers/hwmon/sis5595.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:51 ` [lm-sensors] [23/32] drivers/hwmon/sis5595.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:51 ` [23/32] drivers/hwmon/sis5595.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 24/32] drivers/hwmon/smsc47b397.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 24/32] drivers/hwmon/smsc47b397.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:51 ` [lm-sensors] [24/32] drivers/hwmon/smsc47b397.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:51 ` [24/32] drivers/hwmon/smsc47b397.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 25/32] drivers/hwmon/smsc47m1.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 25/32] drivers/hwmon/smsc47m1.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:52 ` [lm-sensors] [25/32] drivers/hwmon/smsc47m1.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:52 ` [25/32] drivers/hwmon/smsc47m1.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 26/32] drivers/hwmon/via-cputemp.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 26/32] drivers/hwmon/via-cputemp.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:53 ` [lm-sensors] [26/32] drivers/hwmon/via-cputemp.c: Use pr_fmt Guenter Roeck
2010-11-09 16:53 ` [26/32] drivers/hwmon/via-cputemp.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 27/32] drivers/hwmon/via686a.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 27/32] drivers/hwmon/via686a.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:54 ` [lm-sensors] [27/32] drivers/hwmon/via686a.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:54 ` [27/32] drivers/hwmon/via686a.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 28/32] drivers/hwmon/vt1211.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 28/32] drivers/hwmon/vt1211.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:57 ` [lm-sensors] [28/32] drivers/hwmon/vt1211.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:57 ` [28/32] drivers/hwmon/vt1211.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 29/32] drivers/hwmon/vt8231.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 29/32] drivers/hwmon/vt8231.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:58 ` [lm-sensors] [29/32] drivers/hwmon/vt8231.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:58 ` [29/32] drivers/hwmon/vt8231.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 30/32] drivers/hwmon/w83627ehf.c: Use pr_fmt Joe Perches
2010-10-20 6:51 ` [PATCH 30/32] drivers/hwmon/w83627ehf.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 16:59 ` [lm-sensors] [30/32] drivers/hwmon/w83627ehf.c: Use pr_fmt and Guenter Roeck
2010-11-09 16:59 ` [30/32] drivers/hwmon/w83627ehf.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 31/32] drivers/hwmon/w83627hf.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 31/32] drivers/hwmon/w83627hf.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 17:00 ` [lm-sensors] [31/32] drivers/hwmon/w83627hf.c: Use pr_fmt and Guenter Roeck
2010-11-09 17:00 ` [31/32] drivers/hwmon/w83627hf.c: Use pr_fmt and pr_<level> Guenter Roeck
2010-10-20 6:51 ` [lm-sensors] [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt and Joe Perches
2010-10-20 6:51 ` [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt and pr_<level> Joe Perches
2010-11-09 9:39 ` [lm-sensors] [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt Jean Delvare
2010-11-09 9:39 ` [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt and pr_<level> Jean Delvare
2010-11-09 10:04 ` [lm-sensors] [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt Joe Perches
2010-11-09 10:04 ` [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt and pr_<level> Joe Perches
2010-10-20 7:42 ` [lm-sensors] [PATCH] drivers/hwmon: " Jean Delvare
2010-10-20 7:42 ` Jean Delvare
2010-10-20 15:59 ` [lm-sensors] " Joe Perches
2010-10-20 15:59 ` Joe Perches
2010-10-20 16:49 ` [lm-sensors] " Guenter Roeck
2010-10-20 16:49 ` Guenter Roeck
2010-10-20 16:54 ` [lm-sensors] " Joe Perches
2010-10-20 16:54 ` Joe Perches
2010-10-20 17:18 ` [lm-sensors] " Guenter Roeck
2010-10-20 17:18 ` Guenter Roeck
2010-10-20 17:28 ` [lm-sensors] " Joe Perches
2010-10-20 17:28 ` Joe Perches
2010-10-20 17:48 ` [lm-sensors] " Guenter Roeck
2010-10-20 17:48 ` Guenter Roeck
2010-10-20 18:02 ` [lm-sensors] " Joe Perches
2010-10-20 18:02 ` Joe Perches
2010-10-20 18:35 ` Guenter Roeck [this message]
2010-10-20 18:35 ` Guenter Roeck
2010-10-20 19:08 ` [lm-sensors] " Joe Perches
2010-10-20 19:08 ` Joe Perches
2010-10-20 19:57 ` [lm-sensors] " Jean Delvare
2010-10-20 19:57 ` Jean Delvare
2010-10-20 19:19 ` [lm-sensors] " Davidlohr Bueso
2010-10-20 19:19 ` Davidlohr Bueso
2010-10-20 19:38 ` [lm-sensors] " Jean Delvare
2010-10-20 19:38 ` Jean Delvare
2010-10-20 19:52 ` [lm-sensors] " Joe Perches
2010-10-20 19:52 ` Joe Perches
2010-10-20 19:59 ` [lm-sensors] " Joe Perches
2010-10-20 19:59 ` Joe Perches
2010-10-20 20:36 ` [lm-sensors] " Jim Cromie
2010-10-20 20:36 ` Jim Cromie
2010-10-20 20:13 ` [lm-sensors] " Jean Delvare
2010-10-20 20:13 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101020183544.GA22966@ericsson.com \
--to=guenter.roeck@ericsson.com \
--cc=alistair@devzero.co.uk \
--cc=eric.piel@tremplin-utc.net \
--cc=fenghua.yu@intel.com \
--cc=j.w.r.degoede@hhs.nl \
--cc=jim.cromie@gmail.com \
--cc=joe@perches.com \
--cc=juergh@gmail.com \
--cc=khali@linux-fr.org \
--cc=kronos.it@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mhoffman@lightlink.com \
--cc=rydberg@euromail.se \
--cc=vt8231@hiddenengine.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.